when the .debug_info section could not be loaded/parsed.
(process_debug_info): Display the length of the compilation unit
in hex, so that it corresponds with the offsets that will follow.
Tell the user if the length was 32-bit or 64-bit.
If a DIE abbreviation could not be found, tell the user the offset
of the DIE.
(free_debug_memory): Do not attempt to free any entries in the
debug_information array if num_debug_info_entries is set to
DEBUG_INFO_UNAVAILABLE.
version value when reporting unrecognised DWARF version numbers.
(load_debug_info): Remember a failed attempt to load and parse the
.debug_info section and do not repeat such attempts.
(display_debug_lines): Check the return value from load_debug_info
and return whilst displaying a warning message if the load failed.
(display_debug_loc): Likewise.
(display_debug_ranges): Likewise.
(alpha_sigtramp_register_address): Add gdbarch as parameter. Replace
current_gdbarch by gdbarch.
(alpha_heuristic_frame_unwind_cache): Use get_frame_arch to get at the
current architecture by frame_info. Update alpha_heuristic_proc_start
call.
(alpha_sigtramp_frame_this_id, alpha_sigtramp_frame_prev_register): Use
get_frame_arch to get at the current architecture by frame_info. Update
alpha_sigtramp_register_address call.
* arm-tdep.c (thumb_scan_prologue): Add gdbarch as parameter and replace
current_gdbarch by gdbarch. Update caller.
(convert_to_extended, convert_from_extended): Add endianess parameter
for comparison. Update caller.
(arm_extract_return_value, arm_store_return_value): Use
get_regcache_arch to get at the current architecture.
* cris-tdep.c (cris_register_size): Add gdbarch as parameter. Replace
current_gdbarch by gdbarch. Update caller.
(cris_gdb_func, move_to_preg_op, none_reg_mode_move_from_preg_op): Add
gdbarch as parameter. Update caller. Replace current_gdbarch by gdbarch.
* h8300-tdep.c (E_PSEUDO_CCR_REGNUM, E_PSEUDO_EXR_REGNUM, BINWORD): Add
gdbarch as parameter. Update caller.
(h8300_init_frame_cache): Add gdbarch as parameter. Replace
current_gdbarch by gdbarch. Update caller.
* hppa-tdep.c (skip_prologue_hard_way): Add gdbarch as parameter and
update caller. Replace current_gdbarch by gdbarch.
* m32c-tdep.c (m32c_skip_trampoline_code): Use get_frame_arch to get at
the current architecture. Replace current_gdbarch by gdbarch.
* m68hc11-tdep.c (m68hc11_frame_unwind_cache): Likewise.
(STACK_CORRECTION, USE_PAGE_REGISTER): Replace M6811_TDEP by its
expression. Add gdbarch as parameter and replace current_gdbarch with
it. Update caller.
(M6811_TDEP): Remove.
(m68hc11_frame_prev_register): Use get_frame_arch to get at the current
architecture.
(m68hc11_scan_prologue): Add gdbarch as parameter. Replace
current_gdbarch by gdbarch. Update caller.
* m68k-tdep.c (m68k_analyze_prologue): Add gdbarch as parameter and
update caller.
(m68k_analyze_register_saves): Likewise. Also replace current_gdbarch
by gdbarch.
* rs6000-tdep.c (skip_prologue): Add gdbarch as parameter and update
caller. Relace current_gdbarch by gdbarch.
(altivec_register_p, spe_register_p): Likewise.
* ppc-tdep.h (altivec_register_p, spe_register_p): Add gdbarch as
parameter.
* ppc-linux-nat.c (fetch_register, store_register): Update caller of
altivec_register_p and spe_register_p.
* score-tdep.c (score_fetch_inst): Add gdbarch as parameter. Update
caller. Replace current_gdbarch by gdbarch.
(score_analyze_prologue): use get_frame_arch to get at the current
architecture.
* sparc-tdep.h (sparc_analyze_prologue): Add gdbarch as parameter.
* sparc-tdep.c (sparc_analyze_prologue): Likewise. Replace
current_gdbarch by gdbarch. Update caller.
(sparc_frame_cache): Use get_frame_arch to get at the current
architecture.
* sparce64-tdep.c (sparc64_skip_prologue): Update call of
sparc_analyze_prologue.
* mn10300-tdep.c (mn10300_dwarf2_reg_to_regnum): Add gdbarch as
parameter.
2008-01-11 Tristan Gingold <gingold@adacore.com>
Eric Botcazou <ebotcazou@adacore.com>
* ldlang.c (lang_end): Warns if the entry point is not found when
--gc-sections.
Emit an error if no root is specified when --gc-sections -r.
* ld.texinfo (Options): Document that --gc-sections is compatible
with -r and -q.
* ldmain.c (main): Do not error out if -r and --gc-sections.
* scripttempl/elf.sc: Emit ENTRY command only if relocating.
ld/testsuite:
2008-01-11 Tristan Gingold <gingold@adacore.com>
* lib/ld-lib.exp (check_gc_sections_available): Now available on
VxWorks.
* ld-gc: New directory for testing --gc-sections.
* ld-gc/gc.c: New file.
* ld-gc/gc.exp: New file.
* ld-gc/noent.s: New file.
* ld-gc/noent.d: New file.
2008-01-10 H.J. Lu <hongjiu.lu@intel.com>
* gas/i386/nops.s: Add more tests with opcodes from 0x0f19
to 0x0f1f.
* gas/i386/x86-64-nops.s: Likewise.
* gas/i386/nops.d: Updated.
* gas/i386/x86-64-nops.d: Likewise.
opcodes/
2008-01-10 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (REG_0F0E): Renamed to REG_0F0D.
(REG_0F18): Updated.
(reg_table): Updated.
(dis386_twobyte): Updated. Use "nopQ" on 0x19 to 0x1e.
(twobyte_has_modrm): Set 1 for 0x19 to 0x1e.
* dwarf2dbg.c (out_sleb128): Delete.
(size_fixed_inc_line_addr, emit_fixed_inc_line_addr): New.
(out_fixed_inc_line_addr): Delete.
(relax_inc_line_addr, dwarf2dbg_estimate_size_before_relax): Call new
size_fixed_inc_line_addr if DWARF2_USE_FIXED_ADVANCE_PC is set.
(dwarf2dbg_convert_frag): Likewise for emit_fixed_inc_line_addr.
(process_entries): Remove calls to out_fixed_inc_line_addr. When
DWARF2_USE_FIXED_ADVANCE_PC is set, call relax_inc_line_addr.
* read.h (emit_expr_fix): New prototype.
* read.c (emit_expr): Move code to emit_expr_fix and use it here.
(emit_expr_fix): New.
testsuite/
* gas/lns/lns.exp: Run new lns-big-delta test for targets that set
DWARF2_USE_FIXED_ADVANCE_PC.
* gas/lns/lns-big-delta.s: New.
* gas/lns/lns-big-delta.d: New.
seen_double_big_d, treat the new H, D, and DD modifiers as length
modifiers.
* doc/gdb.texinfo (Output): Update documentation on using printf with DFP
types.
* testsuite/gdb.base/printcmds.exp (test_printf_with_dfp): Update
printf calls with required float modifiers.
PR ld/5526
* elf-bfd.h (eh_cie_fde): Add u.cie.u.full_cie and u.cie.merged
fields. Rename u.cie.u.merged to u.cie.u.merged_with.
(eh_frame_sec_info): Add a cies field.
(eh_frame_hdr_info): Add a merge_cies field.
* elf-eh-frame.c (cie): Add a reloc_index member to the personality
union.
(_bfd_elf_begin_eh_frame_parsing): Set hdr_info->merge_cies instead
of hdr_info->cies.
(_bfd_elf_parse_eh_frame): Remove tmp_cie. Ccreate an array of
cie structures in all cases and use it instead of extended_cies.
If merging, store the cie array in sec_info->cies and point each
CIE's eh_fde_cie at the associated element. Do not try to
calculate the value of the personality routine here; record the
offset of the relocation instead. Do not merge CIEs here.
(_bfd_elf_end_eh_frame_parsing): Do not free hdr_info->cies here...
(_bfd_elf_discard_section_eh_frame_hdr): ...do it here instead.
(_bfd_elf_gc_mark_fdes): Mark the original (unmerged) CIE.
(find_merged_cie): New function.
(_bfd_elf_gc_mark_fdes): Use it. Free sec_info->cies.
ld/testsuite/
PR ld/5526
* ld-elf/eh6.s, ld-elf/eh6.d: New test.
* i386-gen.c (lineno): New.
(filename): Likewise.
(set_bitfield): Report filename and line numer on error.
(process_i386_opcodes): Set filename and update lineno.
(process_i386_registers): Likewise.
