defined weak symbol is in.
* config/tc-arm.c (relax_adr, relax_branch, md_apply_fix): Treat
weak symbols as not known to be in the same section, even if they
are defined.
* gas/arm/weakdef-1.s: New.
* gas/arm/weakdef-1.d: New.
* gas/arm/weakdef-2.s: New.
* gas/arm/weakdef-2.d: New.
* gas/arm/weakdef-2.l: New.
* config/tc-tic6x.h (tic6x_label_list): New.
(tic6x_segment_info_type): Keep a list of labels and a current
frag instead of a boolean for whether labels seen and a count of
instructions.
(tic6x_frag_info, TC_FRAG_TYPE, TC_FRAG_INIT, tic6x_frag_init,
md_do_align, tic6x_do_align, md_end, tic6x_end): New.
* config/tc-tic6x.c (tic6x_frob_label): Put label on list.
(tic6x_cleanup): Correct comment.
(tic6x_free_label_list): New.
(tic6x_cons_align): Free label list and update for
tic6x_segment_info_type changes.
(tic6x_do_align): New.
(md_assemble): Handle list of labels and saved frag for execute
packet. Create machine-dependent frag for new execute packet and
adjust labels accordingly.
(tic6x_adjust_section, tic6x_frag_init, tic6x_end): New.
(md_convert_frag, md_estimate_size_before_relax): Update comments.
gas/testsuite:
* gas/tic6x/align-1-be.d, gas/tic6x/align-1.d,
gas/tic6x/align-1.s, gas/tic6x/align-2.d, gas/tic6x/align-2.s:
New.
gas/
2010-04-21 H.J. Lu <hongjiu.lu@intel.com>
PR gas/11509
* config/tc-i386-intel.c (i386_intel_simplify_register): New.
(i386_intel_simplify): Use i386_is_register and
i386_intel_simplify_register. Set X_md for O_register and
check X_md for O_constant.
(i386_intel_operand): Use i386_is_register.
* config/tc-i386.c (i386_is_register): New.
(x86_cons): Initialize the X_md field. Use i386_is_register.
(parse_register): Use i386_is_register.
(tc_x86_parse_to_dw2regnum): Likewise.
gas/testsuite/
2010-04-21 H.J. Lu <hongjiu.lu@intel.com>
PR gas/11509
* gas/i386/equ.s: Add tests for ".equ symbol, reg + NUM".
* gas/i386/equ.d: Updated.
* macro.c (macro_expand_body): Do not treat LOCAL as a keyword in
altmacro mode if found inside a quoted string.
* gas/macros/altmacro.s: New test.
* gas/macros/altmacro.d: Expected output.
* config/tc-hppa.c (pa_ip): Do not allow 64-bit add condition
matcher to accept and unconditional 32-bit add instruction.
(pa_build_unwind_subspace): Cope with error conditions not
allowing the start symbol to be set.
* gas/hppa/basic/add2.s: Add test of simple 32-bit instruction.
* gas/hppa/basic/basic.exp (do_add2): Add grep for expected
disassembly.
Quentin Neill <quentin.neill@amd.com>
opcodes/
* i386-dis.c (OP_LWP_I): Removed.
(reg_table): Do not use OP_LWP_I, use Iq.
(OP_LWPCB_E): Remove use of names16.
(OP_LWP_E): Same.
* i386-opc.tbl: Removed 16bit LWP insns. 32bit LWP insns
should not set the Vex.length bit.
* i386-tbl.h: Regenerated.
gas/
* testsuite/gas/i386/x86-64-lwp.s: Remove use of 16bit LWP insns.
* testsuite/gas/i386/lwp.s: Same.
* testsuite/gas/i386/x86-64-lwp.d: Updated.
* testsuite/gas/i386/lwp.d: Updated.
that two mapping symbols have the same value.
testsuite/
* gas/arm/mapmisc.s: Add the test case for two mapping
symbols having the same value.
* gas/arm/mapmisc.d: Likewise.
* config/tc-arm.c (do_neon_ld_st_interleave): Reject bad
alignment.
testsuite/
* gas/arm/neon-ldst-align-bad.d: New test.
* gas/arm/neon-ldst-align-bad.l: New test.
* gas/arm/neon-ldst-align-bad.s: New test.
mips_fix_loongson2f_jump): New variables.
(md_longopts): Add New options -mfix-loongson2f-nop/jump,
-mno-fix-loongson2f-nop/jump.
(md_parse_option): Initialize variables via above options.
(options): New enums for the above options.
(md_begin): Initialize nop_insn from LOONGSON2F_NOP_INSN.
(fix_loongson2f, fix_loongson2f_nop, fix_loongson2f_jump):
New functions.
(append_insn): call fix_loongson2f().
(mips_handle_align): Replace the implicit nops.
* config/tc-mips.h (MAX_MEM_FOR_RS_ALIGN_CODE): Modified
for the new mips_handle_align().
* doc/c-mips.texi: Document the new options.
* gas/mips/loongson-2f-2.s: New test of -mfix-loongson2f-nop.
* gas/mips/loongson-2f-2.d: Likewise.
* gas/mips/loongson-2f-3.s: New test of -mfix-loongson2f-jump.
* gas/mips/loongson-2f-3.d: Likewise.
* gas/mips/mips.exp: Run the new tests.
* opcode/mips.h (LOONGSON2F_NOP_INSN): New macro.
* config/tc-arm.c (do_rd_rm_rn): Added warning.
gas/testsuite/
* gas/arm/depr-swp.d: New test case.
* gas/arm/depr-swp.s: New file.
* gas/arm/depr-swp.l: New file.
gas/
* config/tc-arm.c (md_pcrel_from_section): Keep base to zero for
non-local branches (BFD_RELOC_THUMB_PCREL_BRANCH23,
BFD_RELOC_THUMB_PCREL_BLX, BFD_RELOC_ARM_PCREL_BLX,
BFD_RELOC_ARM_PCREL_CALL)
gas/testsuite/
* gas/arm/branch-reloc.s, gas/arm/branch-reloc.d,
gas/arm/branch-reloc.l: New tests and expected results with all
variants of call: ARM/Thumb, local/global, inter/intra-section,
using BL/BLX.
a new address, so as not to reuse a previous, non-related reloc.
* gas/arm/arm-it-auto.d, gas/arm/bl-local-v4t.d,
gas/arm/blx-local.d, gas/arm/thumb-w-good.d: Update expected
results.
gas/
* config/tc-i386.c (cpu_arch): Change amdfam15 to bdver1.
(i386_align_code): Rename PROCESSOR_AMDFAM15 to PROCESSOR_BDVER1.
* config/tc-i386.h (processor_type): Same.
* doc/c-i386.texi: Change amdfam15 to bdver1.
opcodes/
* i386-gen.c (cpu_flag_init): Rename CPU_AMDFAM15_FLAGS
to CPU_BDVER1_FLAGS
* i386-init.h: Regenerated.
testsuite/
* gas/i386/i386.exp: Rename amdfam15 test cases to bdver1.
* gas/i386/x86-64-nops-1-amdfam15.d: Renamed test case to
gas/i386/x86-64-nops-1-bdver1.d.
* gas/i386/nops-1-amdfam15.d: Renamed test case to
gas/i386/nops-1-bdver1.d.
* gas/arm/dis-data.d: Update test name. Do not expect
.word output.
* gas/arm/dis-data2.d, gas/arm/dis-data2.s,
gas/arm/dis-data3.d, gas/arm/dis-data3.s: New tests.
opcodes/
* opcodes/arm-dis.c (struct arm_private_data): New.
(print_insn_coprocessor, print_insn_arm): Update to use struct
arm_private_data.
(is_mapping_symbol, get_map_sym_type): New functions.
(get_sym_code_type): Check the symbol's section. Do not check
mapping symbols.
(print_insn): Default to disassembling ARM mode code. Check
for mapping symbols separately from other symbols. Use
struct arm_private_data.
* objdump.c (only): Replace with linked list.
(only_size, only_used): Replace with only_list.
(process_section_p): Set seen field on matches sections.
(add_only): New function.
(free_only_list): New function.
(disassemble_section): Check only_list.
(main): Use add_only and free_only_list.
* gas/pe/aligncomm-c.d: Dump all sections.
* ld-sh/refdbg-0-dso.d: Dump all sections.
* NEWS: Mention new feature.
* config/obj-coff.c (obj_coff_section): Accept digits and use
to override default section alignment power if specified.
* doc/as.texinfo (.section directive): Update documentation.
gas/testsuite/ChangeLog:
* gas/pe/section-align-1.s: New test source file.
* gas/pe/section-align-1.d: Likewise control script.
* gas/pe/section-align-2.s: Likewise ...
* gas/pe/section-align-2.d: ... and likewise.
* gas/pe/pe.exp: Invoke new testcases.
* coff-rs6000.c (xcoff_howto_table): Change size to 0 and bitsize to 1.
(_bfd_xcoff_reloc_type_lookup): Handle BFD_RELOC_NONE.
* coff64-rs6000.c (xcoff64_howto_table): Change size to 0 and
bitsize to 1.
(xcoff64_reloc_type_lookup): Handle BFD_RELOC_NONE.
gas/
* write.h (fix_at_start): Declare.
* write.c (fix_new_internal): Add at_beginning parameter.
Use it instead of REVERSE_SORT_RELOCS. Fix the handling of
seg_fix_tailP for the at_beginning/REVERSE_SORT_RELOCS case.
(fix_new, fix_new_exp): Update accordingly.
(fix_at_start): New function.
* config/tc-ppc.c (md_pseudo_table): Add .ref to the OBJ_XCOFF section.
(ppc_ref): New function, for OBJ_XCOFF.
(md_apply_fix): Handle BFD_RELOC_NONE for OBJ_XCOFF.
* config/te-i386aix.h (REVERSE_SORT_RELOCS): Remove #undef.
gas/testsuite/
* gas/ppc/xcoff-ref-1.s, gas/ppc/xcoff-ref-1.l: New test.
* gas/ppc/aix.exp: Run it.
ld/testsuite/
* ld-powerpc/aix-ref-1-32.od, ld-powerpc/aix-ref-1-64.od,
ld-powerpc/aix-ref-1.s: New tests.
* ld-powerpc/aix52.exp: Run them.
gas/
* config/tc-i386.c (md_assemble): Before accessing the IMM field
check that it's not an XOP insn.
gas/testsuite/
* gas/i386/x86-64-xop.d: Add missing patterns.
* gas/i386/x86-64-xop.s: Same.
* gas/i386/xop.d: Same.
* gas/i386/xop.s: Same.
opcodes/
* i386-opc.tbl: Support all the possible aliases for VPCOM* insns.
* i386-tbl.h: Regenerated.
warning message if a new section is created without setting any
attributes for it.
(md_pseudo_table): Intercept section creation pseudos.
(md_pcrel_from): Replace abort with an error message.
* config/obj-elf.c (obj_elf_section_name): Export this function.
* config/obj-elf.h (obj_elf_section_name): Prototype.
* gas/elf/section0.d: Skip this test for the h8300.
* gas/elf/section1.d: Likewise.
* gas/elf/section6.d: Likewise.
* gas/elf/elf.exp: Skip section2 and section5 tests when the
target is the h8300.
* ld-scrips/sort.exp: Skip these tests when the target is the
h8300.
gas/
* config/tc-arm.c (do_neon_logic): Accept imm value
in the third operand too.
(operand_parse_code): OP_RNDQ_IMVNb renamed to
OP_RNDQ_Ibig.
(parse_operands): OP_NILO case removed, applied renaming.
(insns): Neon shape changed for some logic instructions.
gas/testsuite/
* gas/arm/neon-logic.d: New test case.
* gas/arm/neon-logic.s: New file.
gas/
* config/tc-arm.c (do_neon_ldx_stx): Added
validation for vector load/store insns.
gas/testsuite/
* gas/arm/neon-addressing-bad.d: New test case.
* gas/arm/neon-addressing-bad.s: New file.
* gas/arm/neon-addressing-bad.l: New file.
* config/tc-mips.c (s_mips_ent): Also set BSF_FUNCTION for
".aent".
gas/testsuite/
* gas/mips/aent.d: New test.
* gas/mips/aent.s: Source for the new test.
* gas/mips/mips.exp: Run it.
* config/tc-arm.c (do_ldstv4): Do not allow r15 as the destination
register.
(do_mrs): Likewise.
(do_mul): Likewise.
* arm-dis.c: Add support for %<>ru and %<>rU formats to enforce
unique register numbers. Extend support for %<>R format to
thumb32 and coprocessor instructions.
* gas/arm/unpredictable.s: Add more unpredictable instructions.
* gas/arm/unpredictable.d: Add expected disassemblies.
* arm-dis.c (arm_opcodes): Specify %R in cases where using r15
results in unpredictable behaviour.
(print_insn_arm): Handle %R.
* gas/arm/unpredictable.s: New test case - checks the disassembly
of instructions with unpredictable behaviour.
* gas/arm/unpredictable.d: New file - expected disassembly.
gas/testsuite/
* gas/i386/fma4.d: Add test cases.
* gas/i386/fma4.s: Add test cases.
* gas/i386/x86-64-fma4.d: Add test cases.
* gas/i386/x86-64-fma4.s: Add test cases.
opcodes/
* i386-dis.c (get_vex_imm8): Extend logic to apply in all
cases, to avoid fetching ahead for the immediate bytes when
OP_E_memory has already been called. Fix indentation.
Sebastian Pop <sebastian.pop@amd.com>
gas/testsuite/
* gas/i386/x86-64-fma4.d: Add new patterns.
* gas/i386/x86-64-fma4.s: Same.
* gas/i386/x86-64-xop.d: Adjusted.
opcodes/
* i386-dis.c (get_vex_imm8): Increase bytes_before_imm when
decoding the second source operand from the immediate byte.
(OP_EX_VexW): Pass an extra integer to identify the second
and third source arguments.
* gas/arm/arch4t-eabi.d: Restore previous expected dissambly of
instructions using Immediate Offset addressing with an offset of
zero.
* gas/arm/arch4t.d: Likewise.
* gas/arm/arm7t.d: Likewise.
* gas/arm/xscale.d: Likewise.
* gas/arm/wince-inst.d: Remove 'p' suffix from cmp, cmn, teq and
tst instructions.
PR binutils/10924
* arm-dis.c (print_insn_arm): Do not print an offset of zero when
decoding Immediaate Offset addressing.
PR binutils/10924
* gas/arm/arch4t-eabi.d: Update expected disassembly.
* gas/arm/arch4t.d: Likewise.
* gas/arm/archv6t2.d: Likewise.
* gas/arm/arm7t.d: Likewise.
* gas/arm/inst.d: Likewise.
* gas/arm/xscale.d: Likewise.
PR binutils/10924
* arm-dis.c (arm_opcodes): Add patterns to match undefined LDRB
instruction variants. Add pattern for MRS variant that was being
confused with CMP.
(arm_decode_shift): Place error message in a comment.
(print_insn_arm): Note that writing back to the PC is
unpredictable.
Only print 'p' variants of cmp/cmn/teq/tst instructions if
decoding for pre-V6 architectures.
* opcodes/i386-dis.c (reg_table): Add XOP_8F_TABLE (XOP_09) to
reg_table[REG_8F][1]: for XOP instructions, ModRM.reg first points to
B.mm in the RXB.mmmmm byte, and so when B is set, we still should use
the xop_table.
(get_valid_dis386): Removed unused condition (from cut/n/paste) for
XOP instructions.
* gas/testsuite/gas/i386/x86-64-lwp.s: Updated to also contain
patterns with r[8-15] registers.
* gas/testsuite/gas/i386/x86-64-lwp.d: Same.
2009-10-29 Sebastian Pop <sebastian.pop@amd.com>
* config/tc-i386.c (build_modrm_byte): Do not swap REG and
NDS operands for FMA4.
gas/testsuite/
2009-10-29 Sebastian Pop <sebastian.pop@amd.com>
* gas/i386/fma4.d: Updated patterns.
* gas/i386/x86-64-fma4.d: Same.
opcodes/
2009-10-29 Sebastian Pop <sebastian.pop@amd.com>
* i386-dis.c (OP_VEX_FMA): Removed.
(VexFMA): Removed.
(Vex128FMA): Removed.
(prefix_table): First source operand of FMA4 insns is decoded
with Vex not with VexFMA.
(OP_EX_VexW): Second source operand is decoded with get_vex_imm8
when vex.w is set. Third source operand is decoded with
get_vex_imm8 when vex.w is cleared.
(OP_VEX_FMA): Removed.
* expr.c (resolve_expression): Only add "left" value to O_symbol
expression when the symbol is undefined and different from the
original symbol. Simplify negative logic.
* gas/i386/intelpic.d: Correct.
gas/
* macro.c: Delete unnecessary function declarations.
(buffer_and_nest): Support multiple labels per line for
LABELS_WITHOUT_COLONS targets if the labels do have colons.
(free_macro): Move so that we don't need forward declaration.
* read.c (read_a_source_file): Take a copy of macro expansion line
before we trim labels.
* listing.c (listing_newline): Adjust stdin line save for
input_line_pointer still at start of line.
gas/testsuite/
* gas/macros/dot.s: Don't start macro invocations is first column.
* gas/macros/dot.l: Update.
* gas/macros/macros.exp: Run dot test on more targets.
2009-10-07 Vincent Riviere <vincent.riviere@freesbee.fr>
PR gas/3041
* config/tc-m68k.c (tc_gen_reloc): Fix addend for relocations
located in data section an referencing a weak symbol.
gas/testsuite:
2009-10-07 Vincent Riviere <vincent.riviere@freesbee.fr>
PR gas/3041
* gas/m68k/all.exp: Added "p3041data".
* gas/m68k/p3041.d, gas/m68k/p3041.s: Added tests of weak references
from text section to all possible sections.
* gas/m68k/p3041data.d, gas/m68k/p3041data.s: New test. Check weak
references from data section.
* gas/mips/eret-2.d: Likewise.
* gas/mips/eret-3.d: Likewise.
* gas/mips/eret-1.s: Reformat for readability. Add a label
at the beginning.
* gas/mips/eret-2.s: Add a label at the beginning.
2009-09-14 H.J. Lu <hongjiu.lu@intel.com>
PR gas/10637
* config/tc-i386-intel.c (intel_state): Add has_offset.
(i386_intel_simplify): Set intel_state.has_offset to 1 for
O_offset.
(i386_intel_operand): Turn on intel_state.is_mem if
intel_state.has_offset is 0 and the last char is ']'.
gas/testsuite/
2009-09-14 H.J. Lu <hongjiu.lu@intel.com>
PR gas/10637
* gas/i386/disp.s: Add tests for Intel syntax.
* gas/i386/x86-64-disp.s: Likewise.
* gas/i386/disp.d: Updated.
* gas/i386/intelok.d: Likewise.
* gas/i386/x86-64-disp.d: Likewise.
* gas/i386/disp-intel.d: New.
* gas/i386/x86-64-disp-intel.d: Likewise.
* gas/i386/i386.exp: Run disp-intel and x86-64-disp-intel.
2009-09-14 H.J. Lu <hongjiu.lu@intel.com>
PR gas/10636
* config/tc-i386.c (optimize_disp): Set disp32 for 64bit only
if there is an ADDR_PREFIX.
(i386_finalize_displacement): Repor error if signed 32bit
displacement is out of range.
gas/testsuite/
2009-09-14 H.J. Lu <hongjiu.lu@intel.com>
PR gas/10636
* gas/i386/disp.d: New.
* gas/i386/disp.s: Likewise.
* gas/i386/x86-64-disp.d: Likewise.
* gas/i386/x86-64-disp.s: Likewise.
* gas/i386/i386.exp: Run disp and x86-64-disp.
* gas/i386/x86-64-addr32.s: Add high 32bit displacement tests.
* gas/i386/x86-64-addr32.d: Updated.
* gas/i386/x86-64-addr32-intel.d: Likewise.
* gas/i386/x86-64-inval.l: Likewise.
* gas/i386/x86-64-prescott.d: Likewise.
* gas/i386/x86-64-inval.s: Add invalid displacement tests.
* gas/i386/x86-64-prescott.s: Replace 0x90909090 displacement
with 0x909090.
* config/tc-mips.c (MIPS_JALR_HINT_P): Take an expr argument.
Require the target to be a bare symbol on targets with
in-place addends.
(macro_build_jalr): Update accordingly.
(mips_fix_adjustable): Don't reduce R_MIPS_JALRs on targets
with in-place addends.
gas/testsuite/
* gas/mips/jalr2.s, gas/mips/jalr2.d: New test.
* gas/mips/jal-svr4pic.d: Don't expect R_MIPS_JALRs to be reduced.
* gas/mips/jal-xgot.d: Likewise.
* gas/mips/mips-abi32-pic2.d: Likewise.
* gas/mips/mips.exp: Run it.
* config/tc-d10v.c: Include dwarf2dbg.h.
(write_long, write_1_short, write_2_short): Call dwarf2_emit_insn.
(d10v_frob_label): New function.
* config/tc-d10v.h (d10v_frob_label): Declare.
(tc_frob_label): Define as d10v_frob_label.
gas/testsuite/
* gas/lns/lns-common-1.s: Use two nops between each .loc.
* gas/lns/lns.exp: Don't exclude d10v.
* config/gas/bfin-parse.y (asm_1): Clean up and unify error handling
for load and store insns.
(neg_value): Delete function.
testsuite/
From Bernd Schmidt <bernd.schmidt@analog.com>
* gas/bfin/expected_errors.l, gas/bfin/expected_errors.s:
Check error messages for invalid load/store insns.
(read_a_source_file): Pass the beginning of the symbol through
the new argument of TC_START_LABEL.
* config/tc-arm.h (TC_START_LABEL): Add a new argument.
* config/tc-bfin.c (bfin_start_label): Only search '(' and '['
from the beginning of the symbol.
* config/tc-bfin.h (TC_START_LABEL): Add the new argument.
* config/tc-d30v.h (TC_START_LABEL): Likewise.
* config/tc-fr30.h (TC_START_LABEL): Likewise.
* config/tc-m32c.h (TC_START_LABEL): Likewise.
* config/tc-m32r.h (TC_START_LABEL): Likewise.
* config/tc-mep.h (TC_START_LABEL): Likewise.
testsuite/
* gas/bfin/stack2.s: Add pop multiple instruction with a label
on the same line.
* gas/bfin/stack2.d: Adjust accordingly.
* config/tc-arm.c (do_t_mov_cmp): Do not silently ignore shifted
operands.
* gas/arm/t16-bad.l: Update expected messages for moves with
shifted operands.
* config/tc-arm.c (marked_pr_dependency, mapstate): Delete global
variables.
(mapping_state): Use the section's mapstate.
(mapping_state_2): Likewise. Skip special sections.
(s_arm_unwind_fnend): Use the section's marked_pr_dependency.
(arm_elf_change_section): Do not set deleted globals.
* config/tc-arm.h (struct arm_segment_info_type): Document
marked_pr_dependency.
gas/testsuite/
* gas/arm/mapping2.s: Test code after .ident.
* binutils-all/arm/thumb2-cond.s: Use instructions instead of
.short.
gas/
* config/obj-elf.c (obj_elf_ident): Notify section change to the hook.
* config/tc-arm.c (make_mapping_symbol): New function, from
mapping_state. Save mapping symbols in the frag.
(insert_data_mapping_symbol): New.
(mapping_state): Use make_mapping_symbol, improve state transitions.
(mapping_state_2): New. Provide dummy definition.
(opcode_select): Do not call mapping_state.
(s_bss): Call md_elf_section_change_hook instead of mapping_state.
(output_inst): Update use of tc_frag_data.
(new_automatic_it_block): Call mapping_state before emitting the
IT instruction.
(md_assemble): Move mapping_state to just before outputting the
new instruction.
(arm_handle_align): Update use of tc_frag_data.
Call insert_data_mapping_symbol.
(arm_init_frag): Update use of tc_frag_data. Call
mapping_state_2.
(arm_elf_change_section): Always update the mapping symbol FSM state.
(check_mapping_symbols): New function.
(arm_adjust_symtab): Use check_mapping_symbols.
* config/tc-arm.h (struct arm_frag_type): New.
(TC_FRAG_TYPE): Change to struct arm_frag_type.
(TC_FRAG_INIT): Pass max_chars.
(arm_init_frag): Update prototype.
gas/testsuite/
* gas/arm/mapdir.d, gas/arm/mapdir.s: New files.
* gas/arm/mapping.d: Adapted to new symbols generation.
* gas/arm/mapping2.d: New test case.
* gas/arm/mapping2.s: New file.
* gas/arm/mapping3.d: New test case.
* gas/arm/mapping3.s: New file.
* gas/arm/mapping4.d: New test case.
* gas/arm/mapping4.s: New file.
* gas/arm/mapshort-eabi.d: Adapted to new symbols generation.
* gas/elf/section2.e-armeabi: Adapted to new symbols generation.
2009-07-27 Jan Beulich <jbeulich@novell.com>
* obj-elf.c (elf_file_symbol): Replace symbol name set up by
symbol_new() with the passed in, unmodified one.
gas/testsuite/
2009-07-27 Jan Beulich <jbeulich@novell.com>
* gas/elf/file.[ds]: New.
* gas/elf/elf.exp: Run new test.
gnu_unique_object.
* doc/as.texinfo: Document new feature of .type directive.
* NEWS: Mention support for gnu_unique_object symbol type.
* common.h (STB_GNU_UNIQUE): Define.
* NEWS: Mention the linker's support for symbols with a binding of
STB_GNU_UNIQUE.
* gas/elf/type.s: Add unique global symbol definition.
* gas/elf/type.e: Add expected readelf output for global unique
symbol.
* elfcpp.h (enum STB): Add STB_GNU_UNIQUE.
* readelf.c (get_symbol_binding): For Linux targeted files return
UNIQUE for symbols with the STB_GNU_UNIQUE binding.
* doc/binutils.texi: Document the meaning of the 'u' symbol
binding in the output of nm and objdump --syms.
* elf-bfd.h (struct elf_link_hash_entry): Add unique_global field.
* elf.c (swap_out_syms): Set binding to STB_GNU_UNIQUE for symbols
with the BSF_GNU_UNIQUE flag bit set.
* elfcode.h (elf_slurp_symbol_table): Set the BSF_GNU_UNIQUE flag
for symbols with STB_GNU_UNIQUE binding.
* elflink.c (_bfd_elf_merge_symbol): Set unique_global for symbols
with the STB_GNU_UNIQUE binding.
(elf_link_add_object_symbols): Set the BSF_GNU_UNIQUE flag for
symbols with STB_GNU_UNIQUE binding. Set STB_GNU_UNIQUE for
symbols with the unique_global field set.
(elf_link_output_extsym): Set unique_global field for symbols with
the STB_GNU_UNIQUE binding.
* syms.c (struct bfd_symbol): Define BSF_GNU_UNIQUE flag bit.
(bfd_print_symbol_vandf): Print a 'u' character for BSF_GNU_UNIQUE
symbols.
(bfd_decode_symclass): Return a 'u' character for BSF_GNU_UNIQUE
symbols.
* bfd-in2.h: Regenerate.
2009-07-21 H.J. Lu <hongjiu.lu@intel.com>
PR gas/10420
* config/tc-i386.c (i386_align_code): Tune for 32bit nops in
64bit.
(i386_target_format): Set cpu_arch_isa_flags.bitfield.cpulm
for 64bit.
gas/testsuite/
2009-07-21 H.J. Lu <hongjiu.lu@intel.com>
PR gas/10420
* gas/i386/i386.exp: Run x86-64-nops-1-pentium.
* gas/i386/x86-64-nops-1-pentium.d: New.
(MAX_MEM_FOR_RS_ALIGN_CODE): Define in terms of
MAX_MEM_ALIGNMENT_BYTES.
* config/tc-arm.c (arm_frag_align_code): Replace hard coded
constant with MAX_MEM_FOR_RS_ALIGN_CODE.
* gas/arm/align64.s: New test case.
* gas/arm/align64.d: Expected disassembly.
* config/tc-arm.c (md_assemble): Added validation.
gas/testsuite
* gas/arm/thumb-w-bad.d: New test case.
* gas/arm/thumb-w-bad.l: New file.
* gas/arm/thumb-w-bad.s: New file.
* gas/arm/thumb-w-good.d: New test case.
* gas/arm/thumb-w-good.s: New file.
(set_it_insn_type_nonvoid): New macro.
(emit_thumb32_expr): New function.
(thumb_insn_size): New function.
(emit_insn): New function.
(s_arm_elf_inst): New function.
(md_pseudo_table): New pseudo-opcode entries added.
* doc/c-arm.texi: New directive added.
* gas/arm/inst-po.d: New testcase.
* gas/arm/inst-po.s: New file.
* gas/arm/inst-po-2.d: New testcase.
* gas/arm/inst-po-2.s: New file.
* gas/arm/inst-po-2.l: New file.
* gas/arm/inst-po-3.d: New testcase.
* gas/arm/inst-po-3.s: New file.
* gas/arm/inst-po-be.d: New testcase.
* arm-dis.c (coprocessor): Print the LDC and STC versions of the
LFM and SFM instructions as comments,.
Improve consistency of formatting for instructions displayed as
comments and decimal values displayed with their hexadecimal
equivalents.
Formatting tidy ups.
Updated expected disassembler regexps.
* arm-dis.c (enum opcode_sentinels): New: Used to mark the
boundary between variaant and generic coprocessor instuctions.
(coprocessor): Use it.
Fix architecture version of MCRR and MRRC instructions.
(arm_opcdes): Fix patterns for STRB and STRH instructions.
(print_insn_coprocessor): Check architecture and extension masks.
Print a hexadecimal version of any decimal constant that is
outside of the range of -16 to +32.
(print_arm_address): Add a return value of the offset used in the
adress, if it is worth printing a hexadecimal version of it.
(print_insn_neon): Print a hexadecimal version of any decimal
constant that is outside of the range of -16 to +32.
(print_insn_arm): Likewise.
(print_insn_thumb16): Likewise.
(print_insn_thumb32): Likewise.
PR 10297
* arm-dis.c (UNDEFINED_INSTRUCTION): New macro for a description
of an undefined instruction.
(arm_opcodes): Use it.
(thumb_opcod): Use it.
(thumb32_opc): Use it.
Update expected disassembly regrexps in GAS and LD testsuites.
(implicit_it_mode): New global.
(it_instruction_type): New enum.
(arm_parse_it_mode): New function.
(arm_long_opts): New option added.
(arm_it): New field.
(it_state): New enum.
(now_it): New macro.
(check_it_blocks_finished): New function.
(insns[]): Use the IT Thumb opcodes for ARM too.
(arm_cleanup): Call check_it_blocks_finished.
(now_it_compatible): New function.
(conditional_insn): New function.
(set_it_insn_type): New macro.
(set_it_insn_type_last): New macro.
(do_it): Call automatic IT machinery functions.
(do_t_add_sub): Likewise
(do_t_arit3): Likewise.
(do_t_arit3c): Likewise.
(do_t_blx): Likewise.
(do_t_branch): Likewise.
(do_t_bkpt): Likewise.
(do_t_branch23): Likewise.
(do_t_bx): Likewise.
(do_t_bxj): Likewise.
(do_t_cps): Likewise.
(do_t_cpsi): Likewise.
(do_t_cbz): Likewise.
(do_t_it): Likewise.
(encode_thumb2_ldmstm): Likewise.
(do_t_ldst): Likewise.
(do_t_mov_cmp): Likewise.
(do_t_mvn_tst): Likewise.
(do_t_mul): Likewise.
(do_t_neg): Likewise.
(do_t_setend): Likewise.
(do_t_shift): Likewise.
(do_t_tb): Likewise.
(output_it_inst): New function.
(new_automatic_it_block): New function.
(close_automatic_it_block): New function.
(now_it_add_mask): New function.
(it_fsm_pre_encode): New function.
(handle_it_state): New function.
(it_fsm_post_encode): New function.
(force_automatic_it_block_close): New function.
(in_it_block): New function.
(md_assemble): Call automatic IT block machinery functions.
(arm_frob_label): Likewise.
(arm_opts): New element.
* config/tc-arm.h (it_state): New enum.
(current_it): New struct.
(arm_segment_info_type): New member added.
* doc/c-arm.texi: New option -mimplicit-it documented.
* gas/arm/arm-it-auto.d: New test.
* gas/arm/arm-it-auto.s: New file.
* gas/arm/arm-it-auto-2.d: New test case.
* gas/arm/arm-it-auto-2.s: New file.
* gas/arm/arm-it-auto-3.d: New test case.
* gas/arm/arm-it-auto-3.s: New file.
* gas/arm/arm-it-bad.d: New test case.
* gas/arm/arm-it-bad.l: New file.
* gas/arm/arm-it-bad.s: New file.
* gas/arm/arm-it-bad-2.d: New test case.
* gas/arm/arm-it-bad-2.l: New file.
* gas/arm/arm-it-bad-2.s: New file.
* gas/arm/arm-it-bad-3.d: New test case.
* gas/arm/arm-it-bad-3.l: New file.
* gas/arm/arm-it-bad-3.s: New file.
* gas/arm/thumb2_it_auto.d: New test.
* gas/arm/thumb2_it_bad.l: Error message updated.
* gas/arm/thumb2_it_bad_auto.d: New test.
* gas/arm/thumb2_it.d: Comment added.
* gas/arm/thumb2_it_bad.d: Comment added.
* gas/tc-arm.c (do_t_ssat): Move common code from here...
(do_t_usat): ... and here to...
(do_t_ssat_usat): New function: ... here. Add code to check that
the shift value, if present, is in range.
* gas/arm/thumb2_bad_reg.s: Add tests for SSAT and USAT with an
out of range shift.
* gas/arm/thumb2_bad_reg.l: Update expected error messages.
* arm-dis.c (print_insn_coprocessor): Check that a user specified
ARM architecture supports the matched instruction.
(print_insn_arm): Likewise.
(select_arm_features): New function. Fills in the fields of an
arm_feature_set structure based on a given arm machine number.
(print_insn): Initialise an arm_feature_set structure.
* objdump.c (disassemble_bytes): Set the
USER_SPECIFIED_MACHINE_TYPE flag in the disassemble_info structure
if the user has invoked the -m switch.
* doc/binutils.texi: Document the additional behaviour of
objdump's -m switch for ARM targets.
* dis-asm.h (USER_SPECIFIED_MACHINE_TYPE): New value for the flags
field of struct disassemble_info.
* gas/arm/align.s: Add labels so that COFF based targets can
correctly locate THUMB code.
* gas/arm/copro.d: Do not pass --architecture switch to objdump.
* arm-dis.c (thumb32_opcodes): Fix binary value of SEV.W
instruction.
* gas/arm/thumb32.d: Fix expected binary value of SEV.W instruction.
* config/tc-arm.c (T16_32_TAB): Fix binary value of SEV.W
instruction.
* config/tc-mips.c (nops_for_vr4130): Don't check noreorder_p.
(nops_for_insn): Likewise.
gas/testsuite/
* gas/mips/vr4130.s, gas/mips/vr4130.d: Expect part A to have nops.
2009-05-19 Dave Korn <dave.korn.cygwin@gmail.com>
* cofflink.c (process_embedded_commands): Ignore "-aligncomm".
==> gas/ChangeLog <==
2009-05-19 Dave Korn <dave.korn.cygwin@gmail.com>
* NEWS: Mention new feature.
* config/obj-coff.c (obj_coff_common_parse): New function.
(obj_coff_comm): Likewise.
(coff_pseudo_table): Override default ".comm" definition on PE.
* doc/as.texinfo: Document new feature.
==> gas/testsuite/ChangeLog <==
2009-05-19 Dave Korn <dave.korn.cygwin@gmail.com>
* gas/pe/: New directory for PE format-specific tests.
* gas/pe/aligncomm-a.d: New test pattern file.
* gas/pe/aligncomm-a.s: New test source file.
* gas/pe/aligncomm-b.d: New test pattern file.
* gas/pe/aligncomm-b.s: New test source file.
* gas/pe/aligncomm-c.d: New test pattern file.
* gas/pe/aligncomm-c.s: New test source file.
* gas/pe/aligncomm-d.d: New test pattern file.
* gas/pe/aligncomm-d.s: New test source file.
* gas/pe/pe.exp: New test control script.
* lib/gas-defs.exp (is_pecoff_format): New function.
==> ld/ChangeLog <==
2009-05-19 Dave Korn <dave.korn.cygwin@gmail.com>
* NEWS: Mention new feature.
* deffile.h (def_file_aligncomm): Add new struct definition.
(def_file): Add new def_file_aligncomm member.
* deffilep.y (%token): Add new ALIGNCOMM token.
(command): Add production rule for ALIGNCOMM.
(def_file_free): Free any chained def_file_aligncomm structs.
(diropts[]): Add entry for '-aligncomm' .drectve command.
(def_aligncomm): New grammar function.
* ld.texinfo: Document new feature.
* pe-dll.c (process_def_file): Rename from this ...
(process_def_file_and_drectve): ... to this, updating all callers,
and process any aligncomms chained to the def file after scanning
all .drectve sections.
(generate_edata): Updated to match.
(pe_dll_build_sections): Likewise.
==> ld/testsuite/ChangeLog <==
2009-05-19 Dave Korn <dave.korn.cygwin@gmail.com>
* ld-pe/aligncomm-1.c: New test source file.
* ld-pe/aligncomm-2.c: Likewise.
* ld-pe/aligncomm-3.c: Likewise.
* ld-pe/aligncomm-4.c: Likewise.
* ld-pe/aligncomm.d: New test pattern file.
* ld-pe/direct.exp: Deleted, and content moved into ...
* ld-pe/pe-run.exp: ... New common file for all PE run tests.
* ld-pe/vers-script.exp: Deleted, and content merged into ...
* ld-pe/pe-compile.exp: ... New common file for PE tests needing
a compiler, adding aligned common tests.
* ld-pe/pe.exp: Update header comment.
* config/tc-armeabi.h (FPU_DEFAULT): Likewise.
* config/tc-arm.c (md_begin): If FPU_DEFAULT is set, don't infer
the default FPU from the processor.
testsuite/
* gas/arm/attr-mcpu.d: Add -mfpu=neon.
* gas/arm/mapmisc.d: Correct expected output for .double and
.dcb.d.
2009-04-15 Jan Beulich <jbeulich@novell.com>
* config/tc-i386.c (process_operands): Print operands in
correct order depending on intel_syntax.
gas/testsuite/
2009-04-15 Jan Beulich <jbeulich@novell.com>
* gas/i386/intel.e: Adjust expectations.
* ppc-opc.c (powerpc_opcodes) <"tlbilxlpid", "tlbilxpid", "tlbilxva",
"tlbilx">: Use secondary opcode "18" as per the ISA 2.06 documentation.
Reorder entries so the extended mnemonics are listed before tlbilx.
gas/testsuite/
* gas/ppc/e500mc.d: Update to match extended mnemonics.
