On GNU/Linux, if the target reuses the TID of a thread that GDB still
has in its list marked as THREAD_EXITED, GDB crashes, like:
(gdb) continue
Continuing.
src/gdb/thread.c:789: internal-error: set_running: Assertion `tp->state != THREAD_EXITED' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n) FAIL: gdb.threads/tid-reuse.exp: continue to breakpoint: after_reuse_time (GDB internal error)
Here:
(top-gdb) bt
#0 internal_error (file=0x953dd8 "src/gdb/thread.c", line=789, fmt=0x953da0 "%s: Assertion `%s' failed.")
at src/gdb/common/errors.c:54
#1 0x0000000000638514 in set_running (ptid=..., running=1) at src/gdb/thread.c:789
#2 0x00000000004bda42 in linux_handle_extended_wait (lp=0x16f5760, status=0, stopping=0) at src/gdb/linux-nat.c:2114
#3 0x00000000004bfa24 in linux_nat_filter_event (lwpid=20570, status=198015) at src/gdb/linux-nat.c:3127
#4 0x00000000004c070e in linux_nat_wait_1 (ops=0xe193d0, ptid=..., ourstatus=0x7fffffffd2c0, target_options=1) at src/gdb/linux-nat.c:3478
#5 0x00000000004c1015 in linux_nat_wait (ops=0xe193d0, ptid=..., ourstatus=0x7fffffffd2c0, target_options=1) at src/gdb/linux-nat.c:3722
#6 0x00000000004c92d2 in thread_db_wait (ops=0xd80b60 <thread_db_ops>, ptid=..., ourstatus=0x7fffffffd2c0, options=1)
at src/gdb/linux-thread-db.c:1525
#7 0x000000000066db43 in delegate_wait (self=0xd80b60 <thread_db_ops>, arg1=..., arg2=0x7fffffffd2c0, arg3=1) at src/gdb/target-delegates.c:116
#8 0x000000000067e54b in target_wait (ptid=..., status=0x7fffffffd2c0, options=1) at src/gdb/target.c:2206
#9 0x0000000000625111 in fetch_inferior_event (client_data=0x0) at src/gdb/infrun.c:3275
#10 0x0000000000648a3b in inferior_event_handler (event_type=INF_REG_EVENT, client_data=0x0) at src/gdb/inf-loop.c:56
#11 0x00000000004c2ecb in handle_target_event (error=0, client_data=0x0) at src/gdb/linux-nat.c:4655
I managed to come up with a test that reliably reproduces this. It
spawns enough threads for the pid number space to wrap around, so
could potentially take a while. On my box that's 4 seconds; on
gcc110, a PPC box which has max_pid set to 65536, it's over 10
seconds. So I made the test compute how long that would take, and cap
the time waited if it would be unreasonably long.
Tested on x86_64 Fedora 20.
gdb/ChangeLog:
2015-04-01 Pedro Alves <palves@redhat.com>
* linux-thread-db.c (record_thread): Readd the thread to gdb's
list if it was marked exited.
gdb/testsuite/ChangeLog:
2015-04-01 Pedro Alves <palves@redhat.com>
* gdb.threads/tid-reuse.c: New file.
* gdb.threads/tid-reuse.exp: New file.
This patch, as the subject says, extends GDB so that it is able to use
the contents of the file /proc/PID/coredump_filter when generating a
corefile. This file contains a bit mask that is a representation of
the different types of memory mappings in the Linux kernel; the user
can choose to dump or not dump a certain type of memory mapping by
enabling/disabling the respective bit in the bit mask. Currently,
here is what is supported:
bit 0 Dump anonymous private mappings.
bit 1 Dump anonymous shared mappings.
bit 2 Dump file-backed private mappings.
bit 3 Dump file-backed shared mappings.
bit 4 (since Linux 2.6.24)
Dump ELF headers.
bit 5 (since Linux 2.6.28)
Dump private huge pages.
bit 6 (since Linux 2.6.28)
Dump shared huge pages.
(This table has been taken from core(5), but you can also read about it
on Documentation/filesystems/proc.txt inside the Linux kernel source
tree).
The default value for this file, used by the Linux kernel, is 0x33,
which means that bits 0, 1, 4 and 5 are enabled. This is also the
default for GDB implemented in this patch, FWIW.
Well, reading the file is obviously trivial. The hard part, mind you,
is how to determine the types of the memory mappings. For that, I
extended the code of gdb/linux-tdep.c:linux_find_memory_regions_full and
made it rely *much more* on the information gathered from
/proc/<PID>/smaps. This file contains a "verbose dump" of the
inferior's memory mappings, and we were not using as much information as
we could from it. If you want to read more about this file, take a look
at the proc(5) manpage (I will also write a blog post soon about
everything I had to learn to get this patch done, and when I it is ready
I will post it here).
With Oleg Nesterov's help, we could improve the current algorithm for
determining whether a memory mapping is anonymous/file-backed,
private/shared. GDB now also respects the MADV_DONTDUMP flag and does
not dump the memory mapping marked as so, and will always dump
"[vsyscall]" or "[vdso]" mappings (just like the Linux kernel).
In a nutshell, what the new code is doing is:
- If the mapping is associated to a file whose name ends with
" (deleted)", or if the file is "/dev/zero", or if it is "/SYSV%08x"
(shared memory), or if there is no file associated with it, or if
the AnonHugePages: or the Anonymous: fields in the /proc/PID/smaps
have contents, then GDB considers this mapping to be anonymous.
There is a special case in this, though: if the memory mapping is a
file-backed one, but *also* contains "Anonymous:" or
"AnonHugePages:" pages, then GDB considers this mapping to be *both*
anonymous and file-backed, just like the Linux kernel does. What
that means is simple: this mapping will be dumped if the user
requested anonymous mappings *or* if the user requested file-backed
mappings to be present in the corefile.
It is worth mentioning that, from all those checks described above,
the most fragile is the one to see if the file name ends with
" (deleted)". This does not necessarily mean that the mapping is
anonymous, because the deleted file associated with the mapping may
have been a hard link to another file, for example. The Linux
kernel checks to see if "i_nlink == 0", but GDB cannot easily do
this check (as it has been discussed, GDB would need to run as root,
and would need to check the contents of the /proc/PID/map_files/
directory in order to determine whether the deleted was a hardlink
or not). Therefore, we made a compromise here, and we assume that
if the file name ends with " (deleted)", then the mapping is indeed
anonymous. FWIW, this is something the Linux kernel could do
better: expose this information in a more direct way.
- If we see the flag "sh" in the VmFlags: field (in /proc/PID/smaps),
then certainly the memory mapping is shared (VM_SHARED). If we have
access to the VmFlags, and we don't see the "sh" there, then
certainly the mapping is private. However, older Linux kernels (see
the code for more details) do not have the VmFlags field; in that
case, we use another heuristic: if we see 'p' in the permission
flags, then we assume that the mapping is private, even though the
presence of the 's' flag there would mean VM_MAYSHARE, which means
the mapping could still be private. This should work OK enough,
however.
Finally, it is worth mentioning that I added a new command, 'set
use-coredump-filter on/off'. When it is 'on', it will read the
coredump_filter' file (if it exists) and use its value; otherwise, it
will use the default value mentioned above (0x33) to decide which memory
mappings to dump.
gdb/ChangeLog:
2015-03-31 Sergio Durigan Junior <sergiodj@redhat.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
Oleg Nesterov <oleg@redhat.com>
PR corefiles/16092
* linux-tdep.c: Include 'gdbcmd.h' and 'gdb_regex.h'.
New enum identifying the various options of the coredump_filter
file.
(struct smaps_vmflags): New struct.
(use_coredump_filter): New variable.
(decode_vmflags): New function.
(mapping_is_anonymous_p): Likewise.
(dump_mapping_p): Likewise.
(linux_find_memory_regions_full): New variables
'coredumpfilter_name', 'coredumpfilterdata', 'pid', 'filterflags'.
Removed variable 'modified'. Read /proc/<PID>/smaps file; improve
parsing of its information. Implement memory mapping filtering
based on its contents.
(show_use_coredump_filter): New function.
(_initialize_linux_tdep): New command 'set use-coredump-filter'.
* NEWS: Mention the possibility of using the
'/proc/PID/coredump_filter' file when generating a corefile.
Mention new command 'set use-coredump-filter'.
gdb/doc/ChangeLog:
2015-03-31 Sergio Durigan Junior <sergiodj@redhat.com>
PR corefiles/16092
* gdb.texinfo (gcore): Mention new command 'set
use-coredump-filter'.
(set use-coredump-filter): Document new command.
gdb/testsuite/ChangeLog:
2015-03-31 Sergio Durigan Junior <sergiodj@redhat.com>
PR corefiles/16092
* gdb.base/coredump-filter.c: New file.
* gdb.base/coredump-filter.exp: Likewise.
Exactly like x86_64-*-mingw, SYMBOL_PREFIX should not be set to "_" for
x86_64_*_cygwin
gdb/testuite/ChangeLog:
* lib/gdb.exp (gdb_target_symbol_prefix_flags): Don't set
SYMBOL_PREFIX for x86_64-*-cygwin.
Variables with a DW_AT_const_value but without a DW_AT_location were not
getting added to the partial symbol table. They are added to the full
symbol table, however, when the compilation unit's psymtabs are
expanded.
Before:
(gdb) p one
No symbol "one" in current context.
(gdb) mt flush-symbol-cache
(gdb) mt expand one.c
(gdb) p one
$1 = 1
After:
(gdb) p one
$1 = 1
To the user it's pretty strange, as depending on whether tab completion
has forced expansion of all CUs or not the lookup might succeed, or not
if the failure was already added to the symbol cache.
This commit simply makes sure to add constants to the partial symbol
tables.
gdb/testsuite/ChangeLog:
PR symtab/18148
* gdb.dwarf2/dw2-intercu.S (one, two): Add variables that have a
const_value but not a location.
* gdb.dwarf2/dw2-intercu.exp: Add tests that constants without
location defined in non-main CUs are visible.
gdb/ChangeLog:
PR symtab/18148
* dwarf2read.c (struct partial_die_info): Add has_const_value
member.
(add_partial_symbol): Don't punt on symbols that have const_value
attributes.
(read_partial_die): Detect DW_AT_const_value.
break-asm-file.exp has some manually written dwarf to create some line
number entries like this,
[0x0000013d] Extended opcode 2: set Address to 0x40053f
[0x00000144] Advance Line by 4 to 7
[0x00000146] Copy
[0x00000147] Extended opcode 2: set Address to 0x400541
[0x0000014e] Advance Line by 1 to 8
[0x00000150] Copy
[0x00000151] Extended opcode 2: set Address to 0x400547
[0x00000158] Extended opcode 1: End of Sequence
0x40053f is the start address of function func, and is mapped to line
7. 0x400541 is within function func, and is mapped to line 8.
(gdb) disassemble /r 0x40053f,+8
Dump of assembler code from 0x40053f to 0x400547:
0x000000000040053f <func+0>: 00 00 add %al,(%rax)
0x0000000000400541 <func+2>: 00 00 add %al,(%rax)
0x0000000000400543 <func+4>: 00 00 add %al,(%rax)
0x0000000000400545 <func+6>: 00 00 add %al,(%rax)
in the following test,
(gdb) break a/break-asm-file0.s:func
Breakpoint 1 at 0x40053f: file a/break-asm-file0.s, line 7.
As we can see, breakpoint is set at the start address of function func
on x86, which means no prologue is skipped. On other targets, such as
arm and aarch64, breakpoint is set at the address *after* the start
address, which is mapped to line 8. Then test fails.
In fact, it is lucky this test doesn't fail on x86 and x86_64, whose
gdbarch method skip_prologue doesn't reply on skip_prologue_using_sal
if producer isn't clang.
if (find_pc_partial_function (start_pc, NULL, &func_addr, NULL))
{
CORE_ADDR post_prologue_pc
= skip_prologue_using_sal (gdbarch, func_addr);
struct compunit_symtab *cust = find_pc_compunit_symtab (func_addr);
/* Clang always emits a line note before the prologue and another
one after. We trust clang to emit usable line notes. */
if (post_prologue_pc
&& (cust != NULL
&& COMPUNIT_PRODUCER (cust) != NULL
&& startswith (COMPUNIT_PRODUCER (cust), "clang ")))
return max (start_pc, post_prologue_pc);
}
so it doesn't return and go further to prologue analyser. Since ".int 0"
isn't an instruction of prologue, nothing is skipped, starting address
is used, and test passes.
however, on targets which don't have such producer checking, the first
line number entry is skipped, and skip_prologue_using_sal returns sal
represents the second line number entry.
The idea of this patch is to force GDB stop at somewhere which is stilled
mapped to line 7 after skipping prologue. I choose to add a new line
number entry for the following instruction but mapped to the same line (7),
because I see the comments in dwarf2read.c,
... fact that two consecutive
line number entries for the same line is a heuristic used by gcc
to denote the end of the prologue.
then the line table becomes:
[0x000000d4] Extended opcode 2: set Address to 0x400529
[0x000000db] Advance Line by 4 to 7
[0x000000dd] Copy
[0x000000de] Extended opcode 2: set Address to 0x40052a
[0x000000e5] Advance Line by 0 to 7
[0x000000e7] Copy
[0x000000e8] Extended opcode 2: set Address to 0x40052b
[0x000000ef] Advance Line by 1 to 8
[0x000000f1] Copy
[0x000000f2] Extended opcode 2: set Address to 0x40052c
[0x000000f9] Extended opcode 1: End of Sequence
gdb/testsuite:
2015-03-26 Yao Qi <yao.qi@linaro.org>
PR testsuite/18139
* gdb.linespec/break-asm-file0.s (func): New label .Lfunc_2.
Add a line number entry for the same line.
* gdb.linespec/break-asm-file1.s (func): New label .Lfunc_2.
Add a line number entry for the same line.
There are some hard-coded stuff in .s files, such as .int 0 and
address offset, which isn't portable. This patch is to replace
".int 0" with nop and address offset with labels.
gdb/testsuite:
2015-03-26 Yao Qi <yao.qi@linaro.org>
* gdb.linespec/break-asm-file0.s (func2): Use nop instead of
.int 0.
(func): Likewise. Add .Lfunc_1 label.
Use .Lfunc_1 label.
* gdb.linespec/break-asm-file1.s (func3): Use nop instead of
.int 0.
(func): Likewise.
Use .Lfunc_1 label.
If I add some nop into break-asm-file1.s like this,
--- INDEX:/gdb/testsuite/gdb.linespec/break-asm-file1.s
+++ WORKDIR:/gdb/testsuite/gdb.linespec/break-asm-file1.s
@@ -31,8 +31,8 @@ _func:
.type func, %function
func:
.Lbegin_func:
- .int 0
- .int 0
+ nop
+ nop
.Lend_func:
.size func, .-func
.Lend_text1:
I get the following error:
Running gdb/testsuite/gdb.linespec/break-asm-file.exp ...
gdb/testsuite/gdb.linespec/break-asm-file1.s: Assembler messages:^M
gdb/testsuite/gdb.linespec/break-asm-file1.s: Fatal error: duplicate .debug_line sections
break-asm-file0.s and break-asm-file1.s have already had debug information
(written manually), so don't need to generate debug infor for them.
gdb/testsuite:
2015-03-26 Yao Qi <yao.qi@linaro.org>
* gdb.linespec/break-asm-file.exp: Don't call prepare_for_testing.
Call gdb_compile instead to compile each .s files without debug
information.
Hi,
I see the following two fails in gdb.base/savedregs.exp on aarch64-linux,
info frame 2^M
Stack frame at 0x7ffffffa60:^M
pc = 0x40085c in thrower (/home/yao/SourceCode/gnu/gdb/git/gdb/testsuite/gdb.base/savedregs.c:49); saved pc = 0x400898^M
called by frame at 0x7ffffffa70, caller of frame at 0x7fffffe800^M
source language c.^M
Arglist at 0x7ffffffa60, args: ^M
Locals at 0x7ffffffa60, Previous frame's sp is 0x7ffffffa60^M
(gdb) FAIL: gdb.base/savedregs.exp: Get thrower info frame
info frame 2^M
Stack frame at 0x7fffffe800:^M
pc = 0x400840 in catcher (/home/yao/SourceCode/gnu/gdb/git/gdb/testsuite/gdb.base/savedregs.c:42); saved pc = 0x7fb7ffc350^M
called by frame at 0x7fffffe800, caller of frame at 0x7fffffe7e0^M
source language c.^M
Arglist at 0x7fffffe7f0, args: sig=11^M
Locals at 0x7fffffe7f0, Previous frame's sp is 0x7fffffe800
(gdb) FAIL: gdb.base/savedregs.exp: Get catcher info frame
looks the test expects to match "Saved registers:" from the output of
"info frame", but no registers are saved on these two frames, because
thrower and catcher are simple and leaf functions.
(gdb) disassemble thrower
Dump of assembler code for function thrower:
0x0000000000400858 <+0>: mov x0, #0x0 // #0
0x000000000040085c <+4>: strb wzr, [x0]
0x0000000000400860 <+8>: ret
End of assembler dump.
(gdb) disassemble catcher
Dump of assembler code for function catcher:
0x0000000000400838 <+0>: sub sp, sp, #0x10
0x000000000040083c <+4>: str w0, [sp,#12]
0x0000000000400840 <+8>: adrp x0, 0x410000
0x0000000000400844 <+12>: add x0, x0, #0xb9c
0x0000000000400848 <+16>: mov w1, #0x1 // #1
0x000000000040084c <+20>: str w1, [x0]
0x0000000000400850 <+24>: add sp, sp, #0x10
0x0000000000400854 <+28>: ret
There are two ways to fix these fails, one is to modify functions to
force some registers saved (for example, doing function call in them),
and the other one is to relax the pattern to optionally match
"Saved registers:". I did both, and feel that the latter is simple,
so here is it.
gdb/testsuite:
2015-03-26 Yao Qi <yao.qi@linaro.org>
* gdb.base/savedregs.exp (process_saved_regs): Make
"Saved registers:" optional in the pattern.
The x86-record_goto.S assembly source file does not build on 32-bit.
This breaks many tests that use this file.
Split it into x86_64-record_goto.S and i686-record_goto.S. Luckily, we
can use either one with the same test .exp file.
It further turned out that most tests do not really need a fixed binary;
they should work pretty well with a newly-compiled C program. The
one thing that breaks this is the heavy use of "record goto" to navigate
inside the recorded execution.
Combine step.exp, next,exp, and finish.exp into a single test step.exp
and use normal stepping and reverse-stepping commands for navigation.
testsuite/
* gdb.btrace/next.exp: Merged into step.exp.
* gdb.btrace/finish.exp: Merged into step.exp.
* gdb.btrace/nexti.exp: Merged into stepi.exp.
* gdb.btrace/step.exp: Use record_goto.c as test file. Avoid using
"record goto" and checking the exact replay position.
* gdb.btrace/stepi.exp: Choose test file based on target. Do not
check for "Recording format" in "info record" output.
* gdb.btrace/record_goto.exp: Choose test file based on target.
* gdb.btrace/x86-record_goto.S: Renamed into ...
* gdb.btrace/x86_64-record_goto.S: ... this.
* gdb.btrace/i686-record_goto.S: New.
* gdb.btrace/x86-tailcall.S: Renamed into ...
* gdb.btrace/x86_64-tailcall.S: ... this.
* gdb.btrace/i686-tailcall.S: New.
* gdb.btrace/x86-tailcall.c: Renamed into ...
* gdb.btrace/tailcall.c: ... this. Split "return ++answer" into two
separate statements. Update test.
* gdb.btrace/delta.exp: Use record_goto.c as test file.
* gdb.btrace/gcore.exp: Use record_goto.c as test file.
* gdb.btrace/nohist.exp: Use record_goto.c as test file.
* gdb.btrace/tailcall.exp: Choose test file based on target.
* gdb.btrace/Makefile.in: Remove next, finish, and nexti.
The trace for throwing and catching an exception can be quite big.
Increase the buffer size to avoid spurious fails.
testsuite/
* gdb.btrace/exception.exp: Increase BTS buffer size.
I noticed that "thread apply all" sometimes crashes.
The problem is that thread_apply_all_command doesn take exited threads
into account, and we qsort and then walk more elements than there
really ever were put in the array. Valgrind shows:
The current thread <Thread ID 3> has terminated. See `help thread'.
(gdb) thread apply all p 1
Thread 1 (Thread 0x7ffff7fc2740 (LWP 29579)):
$1 = 1
==29576== Use of uninitialised value of size 8
==29576== at 0x639CA8: set_thread_refcount (thread.c:1337)
==29576== by 0x5C2C7B: do_my_cleanups (cleanups.c:155)
==29576== by 0x5C2CE8: do_cleanups (cleanups.c:177)
==29576== by 0x63A191: thread_apply_all_command (thread.c:1477)
==29576== by 0x50374D: do_cfunc (cli-decode.c:105)
==29576== by 0x506865: cmd_func (cli-decode.c:1893)
==29576== by 0x7562CB: execute_command (top.c:476)
==29576== by 0x647DA4: command_handler (event-top.c:494)
==29576== by 0x648367: command_line_handler (event-top.c:692)
==29576== by 0x7BF7C9: rl_callback_read_char (callback.c:220)
==29576== by 0x64784C: rl_callback_read_char_wrapper (event-top.c:171)
==29576== by 0x647CB5: stdin_event_handler (event-top.c:432)
==29576==
...
This can happen easily today as linux-nat.c/linux-thread-db.c are
forgetting to purge non-current exited threads. But even with that
fixed, we can always do "thread apply all" with an exited thread
selected, which won't be deleted until the user switches to another
thread. That's what the test added by this commit exercises.
Tested on x86_64 Fedora 20.
gdb/ChangeLog:
2015-03-24 Pedro Alves <palves@redhat.com>
* thread.c (thread_apply_all_command): Take exited threads into
account.
gdb/testsuite/ChangeLog:
2015-03-24 Pedro Alves <palves@redhat.com>
* gdb.threads/no-unwaited-for-left.exp: Test "thread apply all".
Currently, "set scheduler-locking step" is a bit odd. The manual
documents it as being optimized for stepping, so that focus of
debugging does not change unexpectedly, but then it says that
sometimes other threads may run, and thus focus may indeed change
unexpectedly... A user can then be excused to get confused and wonder
why does GDB behave like this.
I don't think a user should have to know about details of how "next"
or whatever other run control command is implemented internally to
understand when does the "scheduler-locking step" setting take effect.
This patch completes a transition that the code has been moving
towards for a while. It makes "set scheduler-locking step" hold
threads depending on whether the _command_ the user entered was a
stepping command [step/stepi/next/nexti], or not.
Before, GDB could end up locking threads even on "continue" if for
some reason run control decides a thread needs to be single stepped
(e.g., for a software watchpoint).
After, if a "continue" happens to need to single-step for some reason,
we won't lock threads (unless when stepping over a breakpoint,
naturally). And if a stepping command wants to continue a thread for
bit, like when skipping a function to a step-resume breakpoint, we'll
still lock threads, so focus of debugging doesn't change.
In order to make this work, we need to record in the thread structure
whether what set it running was a stepping command.
(A follow up patch will remove the "step" parameters of 'proceed' and 'resume')
FWIW, Fedora GDB, which defaults to "scheduler-locking step" (mainline
defaults to "off") carries a different patch that goes in this
direction as well.
Tested on x86_64 Fedora 20, native and gdbserver.
gdb/ChangeLog:
2015-03-24 Pedro Alves <palves@redhat.com>
* gdbthread.h (struct thread_control_state) <stepping_command>:
New field.
* infcmd.c (step_once): Pass step=1 to clear_proceed_status. Set
the thread's stepping_command field.
* infrun.c (resume): Check the thread's stepping_command flag to
determine which threads should be resumed. Rename 'entry_step'
local to user_step.
(clear_proceed_status_thread): Clear 'stepping_command'.
(schedlock_applies): Change parameter type to struct thread_info
pointer. Adjust.
(find_thread_needs_step_over): Remove 'step' parameter. Adjust.
(switch_back_to_stepped_thread): Adjust calls to
'schedlock_applies'.
(_initialize_infrun): Adjust "set scheduler-locking step" help.
gdb/testsuite/ChangeLog:
2015-03-24 Pedro Alves <palves@redhat.com>
* gdb.threads/schedlock.exp (test_step): No longer expect that
"set scheduler-locking step" with "next" over a function call runs
threads unlocked.
gdb/doc/ChangeLog:
2015-03-24 Pedro Alves <palves@redhat.com>
* gdb.texinfo (test_step) <set scheduler-locking step>: No longer
mention that threads may sometimes run unlocked.
When setting a pending breakpoint with a thread condition while using
the mi interface, the thread condition would be lost by gdb when the breakpoint
was resolved.
This patch fixes this behavior by setting the thread condition properly in the
mi case.
Also, this patch modifies the mi-pending test case to test for this issue and
removes some unneeded code in the testcase and dependency on stdio.
gdb/Changelog:
PR breakpoints/16466
* breakpoint.c (create_breakpoint): Set thread on breakpoint struct.
gdb/testsuite/ChangeLog:
PR breakpoints/16466
* gdb.mi/Makefile.in: Add mi-pendshr2.sl to cleanup.
* gdb.mi/mi-pending.c (thread_func): New function.
(int main): Add threading support required.
* gdb.mi/mi-pending.exp: Add tests for this issue.
* gdb.mi/mi-pendshr.c (pendfunc1): Remove stdio dependency.
(pendfunc2): Remove stdio dependency.
* gdb.mi/mi-pendshr2.c: New file.
This patch changes the heuristic the linespec lexer uses to
detect a keyword in the input stream.
Currently, the heuristic is: a word is a keyword if it
1) points to a string that is a keyword
2) is followed by a non-identifier character
This is strictly more correct than using whitespace. For example,
it allows constructs such as "break foo if(i == 1)". However,
find_condition_and_thread in breakpoint.c does not support this expanded
usage. It requires whitespace to follow the keyword.
The proposed new heuristic is: a word is a keyword if it
1) points to a string that is a keyword
2) is followed by whitespace
3) is not followed by another keyword string followed by whitespace
This additional complexity allows constructs such as
"break thread thread 3" and "break thread 3". In the former case,
the actual location is a symbol named "thread" to be set on thread #3.
In the later case, the location is NULL, i.e., the default location,
to be set on thread #3.
In order to pass all the new tests added here, I've also had to add a
new feature to parse_breakpoint_sals, which expands recognition of the
default location to keywords other than "if", which is the only keyword
currently permitted with the default (NULL) location, but there is no
reason to exclude other keywords.
Consequently, it will be possible to use "break thread 1" or
"break task 1".
In addition to all of this, it is now possible to remove the keyword_ok
state from the linespec parser.
gdb/ChangeLog
* breakpoint.c (parse_breakpoint_sals): Use
linespec_lexer_lex_keyword to ascertain if the user specified
a NULL location.
* linespec.c [IF_KEYWORD_INDEX]: Define.
(linespec_lexer_lex_keyword): Export.
(struct ls_parser) <keyword_ok>: Remove.
A keyword is only a keyword if not followed by another keyword.
(linespec_lexer_lex_one): Remove keyword_ok handling.
Add comment explaining why the parsing stream is not advanced
when a keyword is seen.
(parse_linespec): Remove parser->keyword_ok.
* linespec.h (linespec_lexer_lex_keyword): Add declaration.
gdb/testsuite/ChangeLog
* gdb.linespec/keywords.c: New file.
* gdb.linespec/keywords.exp: New file.
This bug appears to be caused by bad debuginfo. The method
causing the sefault in the reporter's test case is marked both static
and virtual.
This patch simply safegaurds against this case in dwarf2_add_member_fn,
where the code assumes that there is a `this' pointer when a virtual method
is seen (more specifically, when DW_AT_vtable_elem is seen).
It previously dereferenced the first formal parameter
(`this' pointer), which in this case doesn't exist. GDB consequently
segfaulted dereferencing a NULL pointer.
gdb/ChangeLog
PR gdb/18021
* dwarf2read.c (dwarf2_add_member_fn): Issue a complaint
if we find a static method with DW_AT_vtable_elem_location.
gdb/testsuite/ChangeLog
PR gdb/18021
* gdb.dwarf2/staticvirtual.exp: New test.
Wanting to make sure the new continue-pending-status.exp test tests
both cases of threads 2 and 3 reporting an event, I added counters to
the test, to make it FAIL if events for both threads aren't seen.
Assuming a well behaved backend, and given a reasonable number of
iterations, it should PASS.
However, running that against GNU/Linux gdbserver, I found that
surprisingly, that FAILed. GDBserver always reported the breakpoint
hit for the same thread.
Turns out that I broke gdbserver's thread event randomization
recently, with git commit 582511be ([gdbserver] linux-low.c: better
starvation avoidance, handle non-stop mode too). In that commit I
missed that the thread structure also has a status_pending_p field...
The end result was that count_events_callback always returns 0, and
then if no thread is stepping, select_event_lwp always returns the
event thread. IOW, no randomization is happening at all. Quite
curious how all the other changes in that patch were sufficient to fix
non-stop-fair-events.exp anyway even with that broken.
Tested on x86_64 Fedora 20, native and gdbserver.
gdb/gdbserver/ChangeLog:
2015-03-19 Pedro Alves <palves@redhat.com>
* linux-low.c (count_events_callback, select_event_lwp_callback):
Use the lwp's status_pending_p field, not the thread's.
gdb/testsuite/ChangeLog:
2015-03-19 Pedro Alves <palves@redhat.com>
* gdb.threads/continue-pending-status.exp (saw_thread_2)
(saw_thread_3): New globals.
(top level): Increment them when an event for the corresponding
thread is seen.
(no thread starvation): New test.
If the linux_nat_resume's short-circuits the resume because the
current thread has a pending status, and, a thread with a higher
number was previously stopped for a breakpoint, GDB internal errors,
like:
/home/pedro/gdb/mygit/src/gdb/linux-nat.c:2590: internal-error: status_callback: Assertion `lp->status != 0' failed.
Fix this by make status_callback bail out earlier. GDBserver is
already doing the same.
New test added that exercises this.
gdb/ChangeLog:
2015-03-19 Pedro Alves <palves@redhat.com>
* linux-nat.c (status_callback): Return early if the LWP has no
status pending.
gdb/testsuite/ChangeLog:
2015-03-19 Pedro Alves <palves@redhat.com>
* gdb.threads/continue-pending-status.c: New file.
* gdb.threads/continue-pending-status.exp: New file.
This fixes several problems with this test.
E.g,. with --target_board=native-extended-gdbserver on x86_64 Fedora
20, I get:
Running /home/pedro/gdb/mygit/src/gdb/testsuite/gdb.base/disp-step-syscall.exp ...
FAIL: gdb.base/disp-step-syscall.exp: vfork: get hexadecimal valueof "$pc" (timeout)
FAIL: gdb.base/disp-step-syscall.exp: vfork: single step over vfork final pc
FAIL: gdb.base/disp-step-syscall.exp: vfork: delete break vfork insn
FAIL: gdb.base/disp-step-syscall.exp: vfork: continue to marker (vfork) (the program is no longer running)
And with --target=native-gdbserver, I get:
Running /home/pedro/gdb/mygit/src/gdb/testsuite/gdb.base/disp-step-syscall.exp ...
KPASS: gdb.base/disp-step-syscall.exp: vfork: single step over vfork (PRMS server/13796)
FAIL: gdb.base/disp-step-syscall.exp: vfork: get hexadecimal valueof "$pc" (timeout)
FAIL: gdb.base/disp-step-syscall.exp: vfork: single step over vfork final pc
FAIL: gdb.base/disp-step-syscall.exp: vfork: delete break vfork insn
FAIL: gdb.base/disp-step-syscall.exp: vfork: continue to marker (vfork) (the program is no longer running)
First, the lack of fork support on remote targets is supposed to be
kfailed, so the KPASS is obviously bogus. The extended-remote board
should have KFAILed too.
The problem is that the test is using "is_remote" instead of
gdb_is_target_remote.
And then, I get:
(gdb) PASS: gdb.base/disp-step-syscall.exp: vfork: set displaced-stepping on
stepi
Program terminated with signal SIGSEGV, Segmentation fault.
The program no longer exists.
(gdb) PASS: gdb.base/disp-step-syscall.exp: vfork: single step over vfork
Obviously, that should be a FAIL. The problem is that the test only
expects SIGILL, not SIGSEGV. It also doesn't bail correctly if an
internal error or some other pattern caught by gdb_test_multiple
matches. The test doesn't really need to match specific exits/crashes
patterns, if the PASS regex is improved, like in ...
... this and the other "stepi" tests are a bit too lax, passing on
".*". This tightens those up to expect "x/i" and the "=>" current PC
indicator, like in:
1: x/i $pc
=> 0x3b36abc9e2 <vfork+34>: syscall
On x86_64 Fedora 20, I now get a quick KFAIL instead of timeouts with
both the native-extended-gdbserver and native-gdbserver boards:
PASS: gdb.base/disp-step-syscall.exp: vfork: delete break vfork
PASS: gdb.base/disp-step-syscall.exp: vfork: continue to syscall insn vfork
PASS: gdb.base/disp-step-syscall.exp: vfork: set displaced-stepping on
KFAIL: gdb.base/disp-step-syscall.exp: vfork: single step over vfork (PRMS: server/13796)
and a full pass with native testing.
gdb/testsuite/
2015-03-18 Pedro Alves <palves@redhat.com>
* gdb.base/disp-step-syscall.exp (disp_step_cross_syscall):
Use gdb_is_target_remote instead of is_remote. Use
gdb_test_multiple instead of gdb_expect. Exit early if
gdb_test_multiple hits its internal matches. Tighten stepi tests
expected output. Fail on exit with any signal, instead of just
SIGILL.
Hi,
This patch is to support catch syscall on aarch64 linux. We
implement gdbarch method get_syscall_number for aarch64-linux,
and add aarch64-linux.xml file, which looks straightforward, however
the changes to test case doesn't.
First of all, we enable catch-syscall.exp on aarch64-linux target,
but skip the multi_arch testing on current stage. I plan to touch
multi arch debugging on aarch64-linux later.
Then, when I run catch-syscall.exp on aarch64-linux, gcc errors that
SYS_pipe isn't defined. We find that aarch64 kernel only has pipe2
syscall and libc already convert pipe to pipe2. As a result, I change
catch-syscall.c to use SYS_pipe if it is defined, otherwise use
SYS_pipe2 instead. The vector all_syscalls in catch-syscall.exp can't
be pre-determined, so I add a new proc setup_all_syscalls to fill it,
according to the availability of SYS_pipe.
Regression tested on {x86_64, aarch64}-linux x {native, gdbserver}.
gdb:
2015-03-18 Yao Qi <yao.qi@linaro.org>
PR tdep/18107
* aarch64-linux-tdep.c: Include xml-syscall.h
(aarch64_linux_get_syscall_number): New function.
(aarch64_linux_init_abi): Call
set_gdbarch_get_syscall_number.
* syscalls/aarch64-linux.xml: New file.
gdb/testsuite:
2015-03-18 Yao Qi <yao.qi@linaro.org>
PR tdep/18107
* gdb.base/catch-syscall.c [!SYS_pipe] (pipe2_syscall): New
variable.
* gdb.base/catch-syscall.exp: Don't skip it on
aarch64*-*-linux* target. Remove elements in all_syscalls.
(test_catch_syscall_multi_arch): Skip it on aarch64*-linux*
target.
(setup_all_syscalls): New proc.
We see some fails in watchpoint-reuse-slot.exp on aarch64-linux, because
it sets some HW breakpoint on some address doesn't meet the alignment
requirements by kernel, kernel will reject the
ptrace (PTRACE_SETHBPREGS) call, and some fails are caused, for example:
(gdb) PASS: gdb.base/watchpoint-reuse-slot.exp: always-inserted off: watch x hbreak: : width 1, iter 0: base + 0: delete $bpnum
hbreak *(buf.byte + 0 + 1)^M
Hardware assisted breakpoint 80 at 0x410a61^M
(gdb) PASS: gdb.base/watchpoint-reuse-slot.exp: always-inserted off: watch x hbreak: : width 1, iter 0: base + 1: hbreak *(buf.byte + 0 + 1)
stepi^M
Warning:^M
Cannot insert hardware breakpoint 80.^M
Could not insert hardware breakpoints:^M
You may have requested too many hardware breakpoints/watchpoints.^M
^M
(gdb) FAIL: gdb.base/watchpoint-reuse-slot.exp: always-inserted off: watch x hbreak: : width 1, iter 0: base + 1: stepi advanced
hbreak *(buf.byte + 0 + 1)^M
Hardware assisted breakpoint 440 at 0x410a61^M
Warning:^M
Cannot insert hardware breakpoint 440.^M
Could not insert hardware breakpoints:^M
You may have requested too many hardware breakpoints/watchpoints.^M
^M
(gdb) FAIL: gdb.base/watchpoint-reuse-slot.exp: always-inserted on: watch x hbreak: : width 1, iter 0: base + 1: hbreak *(buf.byte + 0 + 1)
This patch is to skip some tests by checking proc valid_addr_p.
We can handle other targets in valid_addr_p too.
gdb/testsuite:
2015-03-16 Yao Qi <yao.qi@linaro.org>
* gdb.base/watchpoint-reuse-slot.exp (valid_addr_p): New proc.
(top level): Skip tests if valid_addr_p returns false for
$cmd1 or $cmd2.
Unfortunately, the Python version of the dg-extract-results.sh script
doesn't produce stable-enough results for GDB. The test messages
appear to end up alpha sorted (losing the original sequence) and also
sorting changes between runs for some reason. That may be tolerable
for GCC, but for GDB, it often renders test results diffing between
different revisions unworkable.
Until that is fixed upstream, delete the script from the GDB tree.
testsuite/ChangeLog:
2015-03-09 Pedro Alves <palves@redhat.com>
* dg-extract-results.py: Delete.
This merges Sergio's fix from GCC:
https://gcc.gnu.org/ml/gcc-patches/2014-12/msg01293.html
gdb/testsuite/ChangeLog:
2015-03-09 Pedro Alves <palves@redhat.com>
Merge dg-extract-results.sh from GCC upstream (r218843).
2014-12-17 Sergio Durigan Junior <sergiodj@redhat.com>
* dg-extract-results.sh: Use --text with grep to avoid issues with
binary files. Fall back to cat -v, if that doesn't work.
Trying to fix a permanent breakpoints bug, I broke "next" over a
regular breakpoint. "next" would immediately hit the breakpoint the
program was already stopped at. But, the "next over setup" test
failed to notice this and still issued a pass. That's because the
regex matches "testsuite" in:
Breakpoint 2 at 0x400687: file src/gdb/testsuite/gdb.base/bp-permanent.c, line 46.
gdb/testsuite/ChangeLog:
2015-03-05 Pedro Alves <palves@redhat.com>
* gdb.base/bp-permanent.exp: Tighten "next over setup" regex.
When interrupting a thread in non-stop vs all-stop, the signal given in
the MI *stopped event is not the same. Currently, mi_expect_interrupt only
accepts the case for non-stop, so this adds the alternative for all-stop.
gdb/testsuite/ChangeLog:
* lib/mi-support.exp (mi_expect_interrupt): Accept
alternative event for when in all-stop mode.
Gary stumbled on this:
(gdb) PASS: gdb.threads/thread-specific-bp.exp: all-stop: continue to end
info threads
Id Target Id Frame
* 1 Thread 0x7ffff7fdb700 (LWP 13717) "thread-specific" end () at /home/gary/work/archer/startswith/src/gdb/testsuite/gdb.threads/thread-specific-bp.c:29
(gdb) FAIL: gdb.threads/thread-specific-bp.exp: all-stop: thread start is gone
info breakpoint
The problem is that "...archer/startswith/src..." has a "start" in it,
which matches the too-lax regex in the test.
Rather than tweaking the regex, we can just remove the whole "info
threads", like we removed similar ones in other files -- GDB nowadays
does this implicitly already, so things should work without it. Thus
removing this even improves testing here a bit.
gdb/testsuite/ChangeLog:
2015-03-04 Pedro Alves <palves@redhat.com>
* gdb.threads/thread-specific-bp.exp: Delete "info threads" test.
On some targets each of the assignments "i = 0" in the C source for
"breakpoint-in-ro-region.exp" are compiled to a single instruction.
Then each "si" stops at the beginning of the next source line. But on
some other targets (like s390) such an assignment compiles to multiple
instructions. Then "si" may stop in mid-line, and GDB displays the PC
address in addition to the source line number. This was not considered
by the regexp for this case.
gdb/testsuite/ChangeLog:
* gdb.base/breakpoint-in-ro-region.exp (test_single_step): In the
regexps for GDB's current line display, accept a hex address
preceding the line number.
For the "multiple targets" test in catch-syscall.exp, set the 'arch1'
variable to a valid string.
gdb/testsuite/ChangeLog:
* gdb.base/catch-syscall.exp (test_catch_syscall_multi_arch): Set
the 'arch1' variable for "s390*-linux*" targets.
This fixes:
> gdb compile failed, /gdb/testsuite/gdb.threads/clone-thread_db.c: In function 'main':
> /gdb/testsuite/gdb.threads/clone-thread_db.c:67:3: warning: implicit declaration of function 'alarm' [-Wimplicit-function-declaration]
> alarm (300);
> ^
> /gdb/testsuite/gdb.threads/clone-thread_db.c:69:3: warning: implicit declaration of function 'pthread_create' [-Wimplicit-function-declaration]
> pthread_create (&child, NULL, thread_fn, NULL);
> ^
> /gdb/testsuite/gdb.threads/clone-thread_db.c:70:3: warning: implicit declaration of function 'pthread_join' [-Wimplicit-function-declaration]
> pthread_join (child);
> ^
And then adding the missing headers revealed the pthread_join call was
incorrect. This probably fixes the crash we see on ppc64be, e.g., at
https://sourceware.org/ml/gdb-testers/2015-q1/msg04415.html
the logs there show:
...
Program received signal SIGSEGV, Segmentation fault.
[Switching to Thread 0x3fffb7ff54a0 (LWP 9275)]
0x00003fffb7f3ce74 in .pthread_join () from /lib64/libpthread.so.0
(gdb) FAIL: gdb.threads/clone-thread_db.exp: continue to end
...
Tested on x86_64 Fedora 20.
gdb/testsuite/
2015-03-04 Pedro Alves <palves@redhat.com>
* gdb.threads/clone-thread_db.c: Include unistd.h and pthread.h.
(main): Pass missing retval argument to pthread_join call.
This fixes invalid reads Valgrind first caught when debugging against
a GDBserver patched with a series that adds exec events to the remote
protocol. Like these, using the gdb.threads/thread-execl.exp test:
$ valgrind ./gdb -data-directory=data-directory ./testsuite/gdb.threads/thread-execl -ex "tar extended-remote :9999" -ex "b thread_execler" -ex "c" -ex "set scheduler-locking on"
...
Breakpoint 1, thread_execler (arg=0x0) at src/gdb/testsuite/gdb.threads/thread-execl.c:29
29 if (execl (image, image, NULL) == -1)
(gdb) n
Thread 32509.32509 is executing new program: build/gdb/testsuite/gdb.threads/thread-execl
[New Thread 32509.32532]
==32510== Invalid read of size 4
==32510== at 0x5AA7D8: delete_breakpoint (breakpoint.c:13989)
==32510== by 0x6285D3: delete_thread_breakpoint (thread.c:100)
==32510== by 0x628603: delete_step_resume_breakpoint (thread.c:109)
==32510== by 0x61622B: delete_thread_infrun_breakpoints (infrun.c:2928)
==32510== by 0x6162EF: for_each_just_stopped_thread (infrun.c:2958)
==32510== by 0x616311: delete_just_stopped_threads_infrun_breakpoints (infrun.c:2969)
==32510== by 0x616C96: fetch_inferior_event (infrun.c:3267)
==32510== by 0x63A2DE: inferior_event_handler (inf-loop.c:57)
==32510== by 0x4E0E56: remote_async_serial_handler (remote.c:11877)
==32510== by 0x4AF620: run_async_handler_and_reschedule (ser-base.c:137)
==32510== by 0x4AF6F0: fd_event (ser-base.c:182)
==32510== by 0x63806D: handle_file_event (event-loop.c:762)
==32510== Address 0xcf333e0 is 16 bytes inside a block of size 200 free'd
==32510== at 0x4A07577: free (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==32510== by 0x77CB74: xfree (common-utils.c:98)
==32510== by 0x5AA954: delete_breakpoint (breakpoint.c:14056)
==32510== by 0x5988BD: update_breakpoints_after_exec (breakpoint.c:3765)
==32510== by 0x61360F: follow_exec (infrun.c:1091)
==32510== by 0x6186FA: handle_inferior_event (infrun.c:4061)
==32510== by 0x616C55: fetch_inferior_event (infrun.c:3261)
==32510== by 0x63A2DE: inferior_event_handler (inf-loop.c:57)
==32510== by 0x4E0E56: remote_async_serial_handler (remote.c:11877)
==32510== by 0x4AF620: run_async_handler_and_reschedule (ser-base.c:137)
==32510== by 0x4AF6F0: fd_event (ser-base.c:182)
==32510== by 0x63806D: handle_file_event (event-loop.c:762)
==32510==
[Switching to Thread 32509.32532]
Breakpoint 1, thread_execler (arg=0x0) at src/gdb/testsuite/gdb.threads/thread-execl.c:29
29 if (execl (image, image, NULL) == -1)
(gdb)
The breakpoint in question is the step-resume breakpoint of the
non-main thread, the one that was "next"ed.
The exact same issue can be seen on mainline with native debugging, by
running the thread-execl.exp test in non-stop mode, because the kernel
doesn't report a thread exit event for the execing thread.
Tested on x86_64 Fedora 20.
gdb/ChangeLog:
2015-03-02 Pedro Alves <palves@redhat.com>
* infrun.c (follow_exec): Delete all threads of the process except
the event thread. Extended comments.
gdb/testsuite/ChangeLog:
2015-03-02 Pedro Alves <palves@redhat.com>
* gdb.threads/thread-execl.exp (do_test): Handle non-stop.
(top level): Call do_test with non-stop as well.
gdb_test_multiple is supposed to return -1 on internal error:
# Returns:
# 1 if the test failed, according to a built-in failure pattern
# 0 if only user-supplied patterns matched
# -1 if there was an internal error.
But alas, that's broken, it returns success... It looks like the code
is assuming an earlier 'set result -1' is still in effect, but
'result' is set to 0 at the end, just before we call gdb_expect:
set result 0
set code [catch {gdb_expect $code} string]
gdb/testsuite/
2015-03-02 Pedro Alves <palves@redhat.com>
* lib/gdb.exp (gdb_test_multiple) <internal error>: Set result to
-1.
gdb/testsuite/
2015-02-27 Pedro Alves <palves@redhat.com>
* gdb.gdb/complaints.exp (test_initial_complaints): Also accept
"true" for boolean result.
* gdb.gdb/selftest.exp (test_with_self): Also accept full
prototype of main.
In some scenarios, GDB or GDBserver can be spawned with input _not_
connected to a tty, and then tests that rely on stdio fail with
timeouts, because the inferior's stdout and stderr streams end up
fully buffered.
See discussion here:
https://sourceware.org/ml/gdb-patches/2015-02/msg00809.html
We have a hack in place that works around this for Windows testing,
that forces every test program to link with an .o file that does
(lib/set_unbuffered_mode.c):
static int __gdb_set_unbuffered_output (void) __attribute__ ((constructor));
static int
__gdb_set_unbuffered_output (void)
{
setvbuf (stdout, NULL, _IONBF, BUFSIZ);
setvbuf (stderr, NULL, _IONBF, BUFSIZ);
}
That's a bit hacky; it ends up done for _all_ tests.
This patch adds a way to do this unbuffering explicitly from the test
code itself, so it is done only when necessary, and for all
targets/hosts. For starters, it adjusts gdb.base/interrupt.c to use
it.
Tested on x86_64 Fedora 20, native, and against a remote gdbserver
board file that connects to the target with ssh, with and without -t
(create pty).
gdb/testsuite/
2015-02-27 Pedro Alves <palves@redhat.com>
* lib/unbuffer_output.c: New file.
* gdb.base/interrupt.c: Include "../lib/unbuffer_output.c".
(main): Call gdb_unbuffer_output.
As far as I know, "catch syscall" is supported on hppa*-hp-hpux*, but
the test catch-syscall.exp is skipped on this target by mistake. This
patch is to fix it. However, I don't have a hpux machine to test.
gdb/testsuite:
2015-02-27 Yao Qi <yao.qi@linaro.org>
* gdb.base/catch-syscall.exp: Don't skip it on hppa*-hp-hpux*
target.
One could not call IFUNCs (=indirect functions) from the compiled injected
code. Either it errored with:
gdb command line:1:1: error: function return type cannot be function
or it just called the IFUNC dispatcher in normal way, returning real function
implementation address instead of the function return value (and thus no
function was called).
gdb/ChangeLog
2015-02-26 Jan Kratochvil <jan.kratochvil@redhat.com>
* compile/compile-c-symbols.c (convert_one_symbol, convert_symbol_bmsym)
(gcc_symbol_address): Call gnu_ifunc_resolve_addr.
gdb/testsuite/ChangeLog
2015-02-26 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.compile/compile-ifunc.c: New file.
* gdb.compile/compile-ifunc.exp: New file.
When doing finish in a function, if gdb fails to return a value, gdb
also fails at printing the value type if this type is a struct.
For example :
(gdb) fin
....
Value returned has type: . Cannot determine contents
This patch fixes this by calling type_to_string to print the type
so that we can support these types.
This patch returns the following example output :
(gdb) fin
....
Value returned has type: struct test. Cannot determine contents
Also, this patch modifies structs.exp to check that we return the
correct type.
gdb/ChangeLog:
* gdb/infcmd.c (print_return_value): use type_to_string to print type.
gdb/testsuite/ChangeLog:
* gdb.base/structs.exp: Check for correct struct on finish.
On aarch64, we got the following fail:
(gdb) disassemble func
Dump of assembler code for function func:
0x0000000000400730 <+0>: ret
End of assembler dump.^M
(gdb) x/2i func+0^M
0x400730 <func>: ret^M
0x400734 <main>: stp x29, x30, [sp,#-16]!^M
(gdb) FAIL: gdb.dwarf2/dw2-ifort-parameter.exp: x/2i func+0
the pattern in proc function_range expects to match <func+0>, however,
GDB doesn't display the offset when it is zero. This patch is to
adjust the pattern when $func_length is zero.
gdb/testsuite:
2015-02-26 Yao Qi <yao.qi@linaro.org>
* lib/dwarf.exp (function_range): Adjust pattern when $func_length
is zero.
The attached patch fixes the SEGV and lets GDB successfully
load all kernel modules installed by default on RHEL 7.
Valgrind on F-21 x86_64 host has shown me more clear what is the problem:
Reading symbols from /home/jkratoch/t/cordic.ko...Reading symbols from
/home/jkratoch/t/cordic.ko.debug...=================================================================
==22763==ERROR: AddressSanitizer: heap-use-after-free on address 0x6120000461c8 at pc 0x150cdbd bp 0x7fffffffc7e0 sp 0x7fffffffc7d0
READ of size 8 at 0x6120000461c8 thread T0
#0 0x150cdbc in ppc64_elf_get_synthetic_symtab /home/jkratoch/redhat/gdb-test-asan/bfd/elf64-ppc.c:3282
#1 0x8c5274 in elf_read_minimal_symbols /home/jkratoch/redhat/gdb-test-asan/gdb/elfread.c:1205
#2 0x8c55e7 in elf_symfile_read /home/jkratoch/redhat/gdb-test-asan/gdb/elfread.c:1268
[...]
0x6120000461c8 is located 264 bytes inside of 288-byte region [0x6120000460c0,0x6120000461e0)
freed by thread T0 here:
#0 0x7ffff715454f in __interceptor_free (/lib64/libasan.so.1+0x5754f)
#1 0xde9cde in xfree common/common-utils.c:98
#2 0x9a04f7 in do_my_cleanups common/cleanups.c:155
#3 0x9a05d3 in do_cleanups common/cleanups.c:177
#4 0x8c538a in elf_read_minimal_symbols /home/jkratoch/redhat/gdb-test-asan/gdb/elfread.c:1229
#5 0x8c55e7 in elf_symfile_read /home/jkratoch/redhat/gdb-test-asan/gdb/elfread.c:1268
[...]
previously allocated by thread T0 here:
#0 0x7ffff71547c7 in malloc (/lib64/libasan.so.1+0x577c7)
#1 0xde9b95 in xmalloc common/common-utils.c:41
#2 0x8c4da2 in elf_read_minimal_symbols /home/jkratoch/redhat/gdb-test-asan/gdb/elfread.c:1147
#3 0x8c55e7 in elf_symfile_read /home/jkratoch/redhat/gdb-test-asan/gdb/elfread.c:1268
[...]
SUMMARY: AddressSanitizer: heap-use-after-free /home/jkratoch/redhat/gdb-test-asan/bfd/elf64-ppc.c:3282 ppc64_elf_get_synthetic_symtab
[...]
==22763==ABORTING
A similar case a few lines later I have fixed in 2010 by:
https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=3f1eff0a2c7f0e7078f011f55b8e7f710aae0cc2
My testcase does not always reproduce it but at least a bit:
* GDB without ppc64 target (even as a secondary one) is reported as "untested"
* ASAN-built GDB with ppc64 target always crashes (and PASSes with this fix)
* unpatched non-ASAN-built GDB with ppc64 target crashes from commandline
* unpatched non-ASAN-built GDB with ppc64 target PASSes from runtest (?)
gdb/ChangeLog
2015-02-26 Jan Kratochvil <jan.kratochvil@redhat.com>
* elfread.c (elf_read_minimal_symbols): Use bfd_alloc for
bfd_canonicalize_symtab.
gdb/testsuite/ChangeLog
2015-02-26 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.arch/cordic.ko.bz2: New file.
* gdb.arch/cordic.ko.debug.bz2: New file.
* gdb.arch/ppc64-symtab-cordic.exp: New file.
Hi,
I see the following fail in aarch64-linux-gnu testing...
(gdb) set tdesc file /XXX/gdb/testsuite/gdb.xml/single-reg.xml^M
warning: Architecture rejected target-supplied description^M
(gdb) FAIL: gdb.xml/tdesc-regs.exp: set tdesc file single-reg.xml
core-regs isn't set for aarch64 target, and looks it is an oversight
when aarch64 port was added.
gdb/testsuite:
2015-02-25 Yao Qi <yao.qi@linaro.org>
* gdb.xml/tdesc-regs.exp: Set core-regs to aarch64-core.xml for
aarch64*-*-* target.
Because delete_breakpoints uses gdb_expect directly, an internal error
results in slow timeouts instead of quickly bailing out. This patch
rewrites the procedure to use gdb_test_multiple instead, while
preserving the existing general logic ("delete breakpoints" + "info
breakpoints").
gdb/testsuite/
2015-02-23 Pedro Alves <palves@redhat.com>
* lib/gdb.exp (delete_breakpoints): Rewrite using
gdb_test_multiple.
Fixes:
> gdb compile failed, /gdb/testsuite/gdb.base/info-os.c: In function 'main':
> /gdb/testsuite/gdb.base/info-os.c:65:3: warning: implicit declaration of function 'atexit' [-Wimplicit-function-declaration]
> atexit (ipc_cleanup);
> ^
> FAIL: gdb.base/info-os.exp: cannot compile test program
with recent GCCs.
gdb/testsuite/ChangeLog:
2015-02-23 Pedro Alves <palves@redhat.com>
* gdb.base/info-os.c: Include stdlib.h.
gdb/testsuite/ChangeLog:
PR symtab/17855
* gdb.ada/exec_changed.exp: Add second test where symbol lookup cache
is read after symbols have been re-read.
* gdb.ada/exec_changed/first.adb (First): New procedure Break_Me.
* gdb.ada/exec_changed/second.adb (Second): Ditto.
This patch addresses two issues.
The basic problem is that "(anonymous namespace)" doesn't get entered
into the symbol table because when dwarf2read.c:new_symbol_full is called
the DIE has no name (dwarf2_name returns NULL).
PR 17976: ptype '(anonymous namespace)' should work like any namespace
PR 17821: perf issue looking up (anonymous namespace)
bash$ gdb monster-program
(gdb) mt set per on
(gdb) mt set symbol-cache-size 0
(gdb) break (anonymous namespace)::foo
Before:
Command execution time: 3.266289 (cpu), 6.169030 (wall)
Space used: 811429888 (+12910592 for this command)
After:
Command execution time: 1.264076 (cpu), 4.057408 (wall)
Space used: 798781440 (+0 for this command)
gdb/ChangeLog:
PR c++/17976, symtab/17821
* cp-namespace.c (cp_search_static_and_baseclasses): New parameter
is_in_anonymous. All callers updated.
(find_symbol_in_baseclass): Ditto.
(cp_lookup_nested_symbol_1): Ditto. Don't search all static blocks
for symbols in an anonymous namespace.
* dwarf2read.c (namespace_name): Don't call dwarf2_name, fetch
DW_AT_name directly.
(dwarf2_name): Convert missing namespace name to
CP_ANONYMOUS_NAMESPACE_STR.
gdeb/testsuite/ChangeLog:
* gdb.cp/anon-ns.exp: Add test for ptype '(anonymous namespace)'.
gdb/testsuite/ChangeLog
2015-02-21 Jan Kratochvil <jan.kratochvil@redhat.com>
PR corefiles/17808
* gdb.arch/i386-biarch-core.core.bz2: New file.
* gdb.arch/i386-biarch-core.exp: New file.
The buildbot shows that the new
gdb.threads/multi-create-ns-info-thr.exp test is timing out when
tested with --target=native-extended-remote. The reason is:
No breakpoints or watchpoints.
(gdb) break main
Breakpoint 1 at 0x10000b00: file ../../../binutils-gdb/gdb/testsuite/gdb.threads/multi-create.c, line 72.
(gdb) run
Starting program: /home/gdb-buildbot/fedora-21-ppc64be-1/fedora-ppc64be-native-extended-gdbserver/build/gdb/testsuite/outputs/gdb.threads/multi-create-ns-info-thr/multi-cre
ate-ns-info-thr
Process /home/gdb-buildbot/fedora-21-ppc64be-1/fedora-ppc64be-native-extended-gdbserver/build/gdb/testsuite/outputs/gdb.threads/multi-create-ns-info-thr/multi-create-ns-inf
o-thr created; pid = 16266
Unexpected vCont reply in non-stop mode: T0501:00003fffffffd190;40:00000080560fe290;thread:p3f8a.3f8a;core:0;
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
(gdb) break multi-create.c:45
Breakpoint 2 at 0x10000994: file ../../../binutils-gdb/gdb/testsuite/gdb.threads/multi-create.c, line 45.
(gdb) commands
Type commands for breakpoint(s) 2, one per line.
Non-stop tests don't really work with the
--target_board=native-extended-remote board, because tests toggle
non-stop on after GDB is already connected to gdbserver, while
Currently, non-stop must be enabled before connecting.
This adjusts the test to bail if running to main fails, like all other
non-stop tests.
Note non-stop tests do work with --target_board=native-gdbserver.
gdb/testsuite/ChangeLog:
2015-02-21 Pedro Alves <palves@redhat.com>
* gdb.threads/multi-create-ns-info-thr.exp: Return early if
runto_main fails.
Commit 6f9b8491 (Adapt `info probes' to support printing probes of
different types.) added a new type column to "info probes". That
caused a solib-corrupted.exp regression:
~~~~~~~~~~~~~~~~~~~~~
Running /home/pedro/gdb/mygit/src/gdb/testsuite/gdb.base/solib-corrupted.exp ...
FAIL: gdb.base/solib-corrupted.exp: corrupted list
=== gdb Summary ===
# of expected passes 2
# of unexpected failures 1
~~~~~~~~~~~~~~~~~~~~~
Tested on x86_64 Fedora 20.
gdb/testsuite/ChangeLog:
2015-02-20 Pedro Alves <palves@redhat.com>
* gdb.base/solib-corrupted.exp: Expect "stap" as first column of
info probes.
TL;DR - GDB can hang if something refreshes the thread list out of the
target while the target is running. GDB hangs inside td_ta_thr_iter.
The fix is to not use that libthread_db function anymore.
Long version:
Running the testsuite against my all-stop-on-top-of-non-stop series is
still exposing latent non-stop bugs.
I was originally seeing this with the multi-create.exp test, back when
we were still using libthread_db thread event breakpoints. The
all-stop-on-top-of-non-stop series forces a thread list refresh each
time GDB needs to start stepping over a breakpoint (to pause all
threads). That test hits the thread event breakpoint often, resulting
in a bunch of step-over operations, thus a bunch of thread list
refreshes while some threads in the target are running.
The commit adds a real non-stop mode test that triggers the issue,
based on multi-create.exp, that does an explicit "info threads" when a
breakpoint is hit. IOW, it does the same things the as-ns series was
doing when testing multi-create.exp.
The bug is a race, so it unfortunately takes several runs for the test
to trigger it. In fact, even when setting the test running in a loop,
it sometimes takes several minutes for it to trigger for me.
The race is related to libthread_db's td_ta_thr_iter. This is
libthread_db's entry point for walking the thread list of the
inferior.
Sometimes, when GDB refreshes the thread list from the target,
libthread_db's td_ta_thr_iter can somehow see glibc's thread list as a
cycle, and get stuck in an infinite loop.
The issue is that when a thread exits, its thread control structure in
glibc is moved from a "used" list to a "cache" list. These lists are
simply circular linked lists where the "next/prev" pointers are
embedded in the thread control structure itself. The "next" pointer
of the last element of the list points back to the list's sentinel
"head". There's only one set of "next/prev" pointers for both lists;
thus a thread can only be in one of the lists at a time, not in both
simultaneously.
So when thread C exits, simplifying, the following happens. A-C are
threads. stack_used and stack_cache are the list's heads.
Before:
stack_used -> A -> B -> C -> (&stack_used)
stack_cache -> (&stack_cache)
After:
stack_used -> A -> B -> (&stack_used)
stack_cache -> C -> (&stack_cache)
td_ta_thr_iter starts by iterating at the list's head's next, and
iterates until it sees a thread whose next pointer points to the
list's head again. Thus in the before case above, C's next points to
stack_used, indicating end of list. In the same case, the stack_cache
list is empty.
For each thread being iterated, td_ta_thr_iter reads the whole thread
object out of the inferior. This includes the thread's "next"
pointer.
In the scenario above, it may happen that td_ta_thr_iter is iterating
thread B and has already read B's thread structure just before thread
C exits and its control structure moves to the cached list.
Now, recall that td_ta_thr_iter is running in the context of GDB, and
there's no locking between GDB and the inferior. From it's local copy
of B, td_ta_thr_iter believes that the next thread after B is thread
C, so it happilly continues iterating to C, a thread that has already
exited, and is now in the stack cache list.
After iterating C, td_ta_thr_iter finds the stack_cache head, which
because it is not stack_used, td_ta_thr_iter assumes it's just another
thread. After this, unless the reverse race triggers, GDB gets stuck
in td_ta_thr_iter forever walking the stack_cache list, as no thread
in thatlist has a next pointer that points back to stack_used (the
terminating condition).
Before fully understanding the issue, I tried adding cycle detection
to GDB's td_ta_thr_iter callback. However, td_ta_thr_iter skips
calling the callback in some cases, which means that it's possible
that the callback isn't called at all, making it impossible for GDB to
break the loop. I did manage to get GDB stuck in that state more than
once.
Fortunately, we can avoid the issue altogether. We don't really need
td_ta_thr_iter for live debugging nowadays, given PTRACE_EVENT_CLONE.
We already know how to map and lwp id to a thread id without iterating
(thread_from_lwp), so use that more.
gdb/ChangeLog:
2015-02-20 Pedro Alves <palves@redhat.com>
* linux-nat.c (linux_handle_extended_wait): Call
thread_db_notice_clone whenever a new clone LWP is detected.
(linux_stop_and_wait_all_lwps, linux_unstop_all_lwps): New
functions.
* linux-nat.h (thread_db_attach_lwp): Delete declaration.
(thread_db_notice_clone, linux_stop_and_wait_all_lwps)
(linux_unstop_all_lwps): Declare.
* linux-thread-db.c (struct thread_get_info_inout): Delete.
(thread_get_info_callback): Delete.
(thread_from_lwp): Use td_thr_get_info and record_thread.
(thread_db_attach_lwp): Delete.
(thread_db_notice_clone): New function.
(try_thread_db_load_1): If /proc is mounted and shows the
process'es task list, walk over all LWPs and call thread_from_lwp
instead of relying on td_ta_thr_iter.
(attach_thread): Don't call check_thread_signals here. Split the
tail part of the function (which adds the thread to the core GDB
thread list) to ...
(record_thread): ... this function. Call check_thread_signals
here.
(thread_db_wait): Don't call thread_db_find_new_threads_1. Always
call thread_from_lwp.
(thread_db_update_thread_list): Rename to ...
(thread_db_update_thread_list_org): ... this.
(thread_db_update_thread_list): New function.
(thread_db_find_thread_from_tid): Delete.
(thread_db_get_ada_task_ptid): Simplify.
* nat/linux-procfs.c: Include <sys/stat.h>.
(linux_proc_task_list_dir_exists): New function.
* nat/linux-procfs.h (linux_proc_task_list_dir_exists): Declare.
gdb/gdbserver/ChangeLog:
2015-02-20 Pedro Alves <palves@redhat.com>
* thread-db.c: Include "nat/linux-procfs.h".
(thread_db_init): Skip listing new threads if the kernel supports
PTRACE_EVENT_CLONE and /proc/PID/task/ is accessible.
gdb/testsuite/ChangeLog:
2015-02-20 Pedro Alves <palves@redhat.com>
* gdb.threads/multi-create-ns-info-thr.exp: New file.
$ make check RUNTESTFLAGS="--target_board=native-gdbserver no-attach-trace.exp"
...
(gdb) trace main
Tracepoint 1 at 0x400594: file /home/pedro/gdb/mygit/src/gdb/testsuite/gdb.trace/no-attach-trace.c, line 25.
(gdb) PASS: gdb.trace/no-attach-trace.exp: set tracepoint on main
tstart
You can't do that when your target is `exec'
(gdb) FAIL: gdb.trace/no-attach-trace.exp: tstart
Even though this target supports tracing, the test restarts GDB and
doesn't do gdb_run_cmd so does not reconnect to the remote target. So
at that point, GDB only has the "exec" target, which obviously doesn't
do tracing.
The test is about doing "tstart" before running a program, so the fix
is to do gdb_target_supports_trace with whatever target GDB ends up
connected after clean_restart.
Tested on x86_64 Fedora 20, native, native-gdbserver and
native-extended-gdbserver boards. The test passes with the latter,
and is skipped with the first two.
gdb/testsuite/ChangeLog:
2015-02-20 Pedro Alves <palves@redhat.com>
* gdb.trace/no-attach-trace.exp: Don't run to main. Do
clean_restart before gdb_target_supports_trace.
On GNU/Linux, if a pthreaded program has a thread call clone(CLONE_VM)
directly, and then that clone LWP hits a debug event (breakpoint,
etc.) GDB internal errors. Threaded programs shouldn't really be
calling clone directly, but GDB shouldn't crash either.
The crash looks like this:
(gdb) break clone_fn
Breakpoint 2 at 0x4007d8: file clone-thread_db.c, line 35.
(gdb) r
...
[Thread debugging using libthread_db enabled]
...
src/gdb/linux-nat.c:1030: internal-error: lin_lwp_attach_lwp: Assertion `lwpid > 0' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
The problem is that 'clone' ends up clearing the parent thread's tid
field in glibc's thread data structure. For x86_64, the glibc code in
question is here:
sysdeps/unix/sysv/linux/x86_64/clone.S:
...
testq $CLONE_THREAD, %rdi
jne 1f
testq $CLONE_VM, %rdi
movl $-1, %eax <----
jne 2f
movl $SYS_ify(getpid), %eax
syscall
2: movl %eax, %fs:PID
movl %eax, %fs:TID <----
1:
When GDB refreshes the thread list out of libthread_db, it finds a
thread with LWP with pid -1 (the clone's parent), which naturally
isn't yet on the thread list. GDB then tries to attach to that bogus
LWP id, which is caught by that assertion.
The fix is to detect the bad PID early.
Tested on x86-64 Fedora 20. GDBserver doesn't need any fix.
gdb/ChangeLog:
2015-02-20 Pedro Alves <palves@redhat.com>
PR threads/18006
* linux-thread-db.c (thread_get_info_callback): Return early if
the thread's lwp id is -1.
gdb/testsuite/ChangeLog:
2015-02-20 Pedro Alves <palves@redhat.com>
PR threads/18006
* gdb.threads/clone-thread_db.c: New file.
* gdb.threads/clone-thread_db.exp: New file.
When gdb creates a dummy frame to execute a function in the inferior,
the process may generate a SIGSEGV, SIGTRAP or SIGILL because the stack
is non executable. If the signal handler set in gdb has option print
or stop enabled for these signals gdb handles this correctly.
However, in the case of noprint and nostop the signal is short-circuited
and the inferior process is sent the signal directly. This causes the
inferior to crash because of gdb.
This patch adds a check for SIGSEGV, SIGTRAP or SIGILL so that these
signals are sent to gdb rather than short-circuited in the inferior.
gdb then handles them properly and the inferior process does not
crash.
This patch also fixes the same behavior in gdbserver.
Also added a small testcase to test the issue called catch-gdb-caused-signals.
This applies to Linux only, tested on Linux.
gdb/ChangeLog:
PR breakpoints/16812
* linux-nat.c (linux_nat_filter_event): Report SIGTRAP,SIGILL,SIGSEGV.
* nat/linux-ptrace.c (linux_wstatus_maybe_breakpoint): Add.
* nat/linux-ptrace.h: Add linux_wstatus_maybe_breakpoint.
gdb/gdbserver/ChangeLog:
PR breakpoints/16812
* linux-low.c (wstatus_maybe_breakpoint): Remove.
(linux_low_filter_event): Update wstatus_maybe_breakpoint name.
(linux_wait_1): Report SIGTRAP,SIGILL,SIGSEGV.
gdb/testsuite/ChangeLog:
PR breakpoints/16812
* gdb.base/catch-gdb-caused-signals.c: New file.
* gdb.base/catch-gdb-caused-signals.exp: New file.
This patch introduces a new M4 macro GDB_AC_TRANSFORM to avoid repeating
the common idiom which is the transformation of target program names,
i.e. from gdb to sparc64-linux-gnu-gdb. It also makes gdb/configure.ac
and gdb/testsuite/configure.ac to use the new macro.
gdb/ChangeLog:
2015-02-18 Jose E. Marchesi <jose.marchesi@oracle.com>
* configure: Regenerated.
* configure.ac: Use GDB_AC_TRANSFORM.
* Makefile.in (aclocal_m4_deps): Added transform.m4.
* acinclude.m4: sinclude transform.m4.
* transform.m4: New file.
(GDB_AC_TRANSFORM): New macro.
gdb/testsuite/ChangeLog:
2015-02-18 Jose E. Marchesi <jose.marchesi@oracle.com>
* configure: Regenerated.
* configure.ac: Use GDB_AC_TRANSFORM.
* aclocal.m4: sinclude ../transform.m4.
This patch adds some simple tests testing the support for DTrace USDT
probes. The testsuite will be skipped as unsupported in case the user
does not have DTrace installed on her system. The tests included in the
test suite test breakpointing on DTrace probes, enabling and disabling
probes, printing of probe arguments of several types and also
breakpointing on several probes with the same name.
gdb/ChangeLog:
2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
* lib/dtrace.exp: New file.
* gdb.base/dtrace-probe.exp: Likewise.
* gdb.base/dtrace-probe.d: Likewise.
* gdb.base/dtrace-probe.c: Likewise.
* lib/pdtrace.in: Likewise.
* configure.ac: Output variables with the transformed names of
the strip, readelf, as and nm tools. AC_SUBST lib/pdtrace.in.
* configure: Regenerated.
This patch moves the `compute_probe_arg' and `compile_probe_arg' functions
from stap-probe.c to probe.c. The rationale is that it is reasonable to
assume that all backends will provide the `$_probe_argN' convenience
variables, and that the user must be placed on the PC of the probe when
requesting that information. The value and type of the argument can still be
determined by the probe backend via the `pops->evaluate_probe_argument' and
`pops->compile_to_ax' handlers.
Note that a test in gdb.base/stap-probe.exp had to be adjusted because the "No
SystemTap probe at PC" messages are now "No probe at PC".
gdb/ChangeLog:
2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
* probe.c (compute_probe_arg): Moved from stap-probe.c
(compile_probe_arg): Likewise.
(probe_funcs): Likewise.
* stap-probe.c (compute_probe_arg): Moved to probe.c.
(compile_probe_arg): Likewise.
(probe_funcs): Likewise.
gdb/testsuite/ChangeLog:
2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
* gdb.base/stap-probe.exp (stap_test): Remove "SystemTap" from
expected message when trying to access $_probe_* convenience
variables while not on a probe.
It definitely does not test all the RETURN_MASK_ERROR cases. But it tests at
least two of them.
gdb/testsuite/ChangeLog
2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.python/py-framefilter.exp (pagination quit - *): New tests.
On decr_pc_after_break targets, GDB adjusts the PC incorrectly if a
background single-step stops somewhere where PC-$decr_pc has a
breakpoint, and the thread that finishes the step is not the current
thread, like:
ADDR1 nop <-- breakpoint here
ADDR2 jmp PC
IOW, say thread A is stepping ADDR2's line in the background (an
infinite loop), and the user switches focus to thread B. GDB's
adjust_pc_after_break logic confuses the single-step stop of thread A
for a hit of the breakpoint at ADDR1, and thus adjusts thread A's PC
to point at ADDR1 when it should not, and reports a breakpoint hit,
when thread A did not execute the instruction at ADDR1 at all.
The test added by this patch exercises exactly that.
I can't find any reason we'd need the "thread to be examined is still
the current thread" condition in adjust_pc_after_break, at least
nowadays; it might have made sense in the past. Best just remove it,
and rely on currently_stepping().
Here's the test's log of a run with an unpatched GDB:
35 while (1);
(gdb) PASS: gdb.threads/step-bg-decr-pc-switch-thread.exp: next over nop
next&
(gdb) PASS: gdb.threads/step-bg-decr-pc-switch-thread.exp: next& over inf loop
thread 1
[Switching to thread 1 (Thread 0x7ffff7fc2740 (LWP 29027))](running)
(gdb)
PASS: gdb.threads/step-bg-decr-pc-switch-thread.exp: switch to main thread
Breakpoint 2, thread_function (arg=0x0) at ...src/gdb/testsuite/gdb.threads/step-bg-decr-pc-switch-thread.c:34
34 NOP; /* set breakpoint here */
FAIL: gdb.threads/step-bg-decr-pc-switch-thread.exp: no output while stepping
gdb/ChangeLog:
2015-02-11 Pedro Alves <pedro@codesourcery.com>
* infrun.c (adjust_pc_after_break): Don't adjust the PC just
because the event thread is not the current thread.
gdb/testsuite/ChangeLog:
2015-02-11 Pedro Alves <pedro@codesourcery.com>
* gdb.threads/step-bg-decr-pc-switch-thread.c: New file.
* gdb.threads/step-bg-decr-pc-switch-thread.exp: New file.
Some local changes I was working on related to SIGTRAP handling
resulted in "signal SIGTRAP" no longer passing the SIGTRAP to the
inferior.
Surprisingly, only annota1.exp catches this. This commit adds a test
that doesn't rely on annotations, so that at the point annotations are
finaly dropped, we still have this use case covered ...
This is a multi-threaded test to also exercise the case of first
needing to do a step-over before delivering the signal.
Tested on x86_64 Fedora 20, native, remote/extended-remote gdbserver.
gdb/testsuite/
2015-02-10 Pedro Alves <palves@redhat.com>
* gdb.threads/signal-sigtrap.c: New file.
* gdb.threads/signal-sigtrap.exp: New file.
When gdbserver is called with --multi and attach has not been called yet
and tstart is called on the gdb client, gdbserver would crash.
This patch fixes gdbserver so that it returns E01 to the gdb client.
Also this patch adds a testcase to verify this bug named no-attach-trace.exp
gdb/gdbserver/ChangeLog:
PR breakpoints/15956
* tracepoint.c (cmd_qtinit): Add check for current_thread.
gdb/testsuite/ChangeLog:
* gdb.trace/no-attach-trace.c: New file.
* gdb.trace/no-attach-trace.exp: New file.
Indicate gaps in the trace due to decode errors. Internally, a gap is
represented as a btrace function segment without instructions and with a
non-zero format-specific error code.
Show the gap when traversing the instruction or function call history.
Also indicate gaps in "info record".
It looks like this:
(gdb) info record
Active record target: record-btrace
Recording format: Branch Trace Store.
Buffer size: 64KB.
Recorded 32 instructions in 5 functions (1 gaps) for thread 1 (process 7182).
(gdb) record function-call-history /cli
1 fib inst 1,9 at src/fib.c:9,14
2 fib inst 10,20 at src/fib.c:6,14
3 [decode error (1): instruction overflow]
4 fib inst 21,28 at src/fib.c:11,14
5 fib inst 29,33 at src/fib.c:6,9
(gdb) record instruction-history 20,22
20 0x000000000040062f <fib+47>: sub $0x1,%rax
[decode error (1): instruction overflow]
21 0x0000000000400613 <fib+19>: add $0x1,%rax
22 0x0000000000400617 <fib+23>: mov %rax,0x200a3a(%rip)
(gdb)
Gaps are ignored during reverse execution and replay.
2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
* btrace.c (ftrace_find_call): Skip gaps.
(ftrace_new_function): Initialize level.
(ftrace_new_call, ftrace_new_tailcall, ftrace_new_return)
(ftrace_new_switch): Update
level computation.
(ftrace_new_gap): New.
(ftrace_update_function): Create new function after gap.
(btrace_compute_ftrace_bts): Create gap on error.
(btrace_stitch_bts): Update parameters. Clear trace if it
becomes empty.
(btrace_stitch_trace): Update parameters. Update callers.
(btrace_clear): Reset the number of gaps.
(btrace_insn_get): Return NULL if the iterator points to a gap.
(btrace_insn_number): Return zero if the iterator points to a gap.
(btrace_insn_end): Allow gaps at the end.
(btrace_insn_next, btrace_insn_prev, btrace_insn_cmp): Handle gaps.
(btrace_find_insn_by_number): Assert that the found iterator does
not point to a gap.
(btrace_call_next, btrace_call_prev): Assert that the last function
is not a gap.
* btrace.h (btrace_bts_error): New.
(btrace_function): Update comment.
(btrace_function) <insn, insn_offset, number>: Update comment.
(btrace_function) <errcode>: New.
(btrace_thread_info) <ngaps>: New.
(btrace_thread_info) <replay>: Update comment.
(btrace_insn_get): Update comment.
* record-btrace.c (btrace_ui_out_decode_error): New.
(record_btrace_info): Print number of gaps.
(btrace_insn_history, btrace_call_history): Call
btrace_ui_out_decode_error for gaps.
(record_btrace_step_thread, record_btrace_start_replaying): Skip gaps.
testsuite/
* gdb.btrace/buffer-size.exp: Update "info record" output.
* gdb.btrace/delta.exp: Update "info record" output.
* gdb.btrace/enable.exp: Update "info record" output.
* gdb.btrace/finish.exp: Update "info record" output.
* gdb.btrace/instruction_history.exp: Update "info record" output.
* gdb.btrace/next.exp: Update "info record" output.
* gdb.btrace/nexti.exp: Update "info record" output.
* gdb.btrace/step.exp: Update "info record" output.
* gdb.btrace/stepi.exp: Update "info record" output.
* gdb.btrace/nohist.exp: Update "info record" output.
Allow the size of the branch trace ring buffer to be defined by the
user. The specified buffer size will be used when BTS tracing is
enabled for new threads.
The obtained buffer size may differ from the requested size. The
actual buffer size for the current thread is shown in the "info record"
command.
Bigger buffers mean longer traces, but also longer processing time.
2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
* btrace.c (parse_xml_btrace_conf_bts): Add size.
(btrace_conf_bts_attributes): New.
(btrace_conf_children): Add attributes.
* common/btrace-common.h (btrace_config_bts): New.
(btrace_config)<bts>: New.
(btrace_config): Update comment.
* nat/linux-btrace.c (linux_enable_btrace, linux_enable_bts):
Use config.
* features/btrace-conf.dtd: Increment version. Add size
attribute to bts element.
* record-btrace.c (set_record_btrace_bts_cmdlist,
show_record_btrace_bts_cmdlist): New.
(record_btrace_adjust_size, record_btrace_print_bts_conf,
record_btrace_print_conf, cmd_set_record_btrace_bts,
cmd_show_record_btrace_bts): New.
(record_btrace_info): Call record_btrace_print_conf.
(_initialize_record_btrace): Add commands.
* remote.c: Add PACKET_Qbtrace_conf_bts_size enum.
(remote_protocol_features): Add Qbtrace-conf:bts:size packet.
(btrace_sync_conf): Synchronize bts size.
(_initialize_remote): Add Qbtrace-conf:bts:size packet.
* NEWS: Announce new commands and new packets.
doc/
* gdb.texinfo (Branch Trace Configuration Format): Add size.
(Process Record and Replay): Describe new set|show commands.
(General Query Packets): Describe Qbtrace-conf:bts:size packet.
testsuite/
* gdb.btrace/buffer-size: New.
gdbserver/
* linux-low.c (linux_low_btrace_conf): Print size.
* server.c (handle_btrace_conf_general_set): New.
(hanle_general_set): Call handle_btrace_conf_general_set.
(handle_query): Report Qbtrace-conf:bts:size as supported.
Add a struct to describe the branch trace configuration and use it for
enabling branch tracing.
The user will be able to set configuration fields for each tracing format
to be used for new threads.
The actual configuration that is active for a given thread will be shown
in the "info record" command.
At the moment, the configuration struct only contains a format field
that is set to the only available format.
The format is the only configuration option that can not be set via set
commands. It is given as argument to the "record btrace" command when
starting recording.
2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
* Makefile.in (XMLFILES): Add btrace-conf.dtd.
* x86-linux-nat.c (x86_linux_enable_btrace): Update parameters.
(x86_linux_btrace_conf): New.
(x86_linux_create_target): Initialize to_btrace_conf.
* nat/linux-btrace.c (linux_enable_btrace): Update parameters.
Check format. Split into this and ...
(linux_enable_bts): ... this.
(linux_btrace_conf): New.
(perf_event_skip_record): Renamed into ...
(perf_event_skip_bts_record): ... this. Updated users.
(linux_disable_btrace): Split into this and ...
(linux_disable_bts): ... this.
(linux_read_btrace): Check format.
* nat/linux-btrace.h (linux_enable_btrace): Update parameters.
(linux_btrace_conf): New.
(btrace_target_info)<ptid>: Moved.
(btrace_target_info)<conf>: New.
(btrace_target_info): Split into this and ...
(btrace_tinfo_bts): ... this. Updated users.
* btrace.c (btrace_enable): Update parameters.
(btrace_conf, parse_xml_btrace_conf_bts, parse_xml_btrace_conf)
(btrace_conf_children, btrace_conf_attributes)
(btrace_conf_elements): New.
* btrace.h (btrace_enable): Update parameters.
(btrace_conf, parse_xml_btrace_conf): New.
* common/btrace-common.h (btrace_config): New.
* feature/btrace-conf.dtd: New.
* record-btrace.c (record_btrace_conf): New.
(record_btrace_cmdlist): New.
(record_btrace_enable_warn, record_btrace_open): Pass
&record_btrace_conf.
(record_btrace_info): Print recording format.
(cmd_record_btrace_bts_start): New.
(cmd_record_btrace_start): Call cmd_record_btrace_bts_start.
(_initialize_record_btrace): Add "record btrace bts" subcommand.
Add "record bts" alias command.
* remote.c (remote_state)<btrace_config>: New.
(remote_btrace_reset, PACKET_qXfer_btrace_conf): New.
(remote_protocol_features): Add qXfer:btrace-conf:read.
(remote_open_1): Call remote_btrace_reset.
(remote_xfer_partial): Handle TARGET_OBJECT_BTRACE_CONF.
(btrace_target_info)<conf>: New.
(btrace_sync_conf, btrace_read_config): New.
(remote_enable_btrace): Update parameters. Call btrace_sync_conf and
btrace_read_conf.
(remote_btrace_conf): New.
(init_remote_ops): Initialize to_btrace_conf.
(_initialize_remote): Add qXfer:btrace-conf packet.
* target.c (target_enable_btrace): Update parameters.
(target_btrace_conf): New.
* target.h (target_enable_btrace): Update parameters.
(target_btrace_conf): New.
(target_object)<TARGET_OBJECT_BTRACE_CONF>: New.
(target_ops)<to_enable_btrace>: Update parameters and comment.
(target_ops)<to_btrace_conf>: New.
* target-delegates: Regenerate.
* target-debug.h (target_debug_print_const_struct_btrace_config_p)
(target_debug_print_const_struct_btrace_target_info_p): New.
NEWS: Announce new command and new packet.
doc/
* gdb.texinfo (Process Record and Replay): Describe the "record
btrace bts" command.
(General Query Packets): Describe qXfer:btrace-conf:read packet.
(Branch Trace Configuration Format): New.
gdbserver/
* linux-low.c (linux_low_enable_btrace): Update parameters.
(linux_low_btrace_conf): New.
(linux_target_ops)<to_btrace_conf>: Initialize.
* server.c (current_btrace_conf): New.
(handle_btrace_enable): Rename to ...
(handle_btrace_enable_bts): ... this. Pass ¤t_btrace_conf
to target_enable_btrace. Update comment. Update users.
(handle_qxfer_btrace_conf): New.
(qxfer_packets): Add btrace-conf entry.
(handle_query): Report qXfer:btrace-conf:read as supported packet.
* target.h (target_ops)<enable_btrace>: Update parameters and comment.
(target_ops)<read_btrace_conf>: New.
(target_enable_btrace): Update parameters.
(target_read_btrace_conf): New.
testsuite/
* gdb.btrace/delta.exp: Update "info record" output.
* gdb.btrace/enable.exp: Update "info record" output.
* gdb.btrace/finish.exp: Update "info record" output.
* gdb.btrace/instruction_history.exp: Update "info record" output.
* gdb.btrace/next.exp: Update "info record" output.
* gdb.btrace/nexti.exp: Update "info record" output.
* gdb.btrace/step.exp: Update "info record" output.
* gdb.btrace/stepi.exp: Update "info record" output.
* gdb.btrace/nohist.exp: Update "info record" output.
Typing "enable count" by itself crashes GDB. Also, if you omit the
breakpoint number/range, the error message is not very clear:
(gdb) enable count 2
warning: bad breakpoint number at or near ''
(gdb) enable count
Segmentation fault (core dumped)
With this patch, the error messages are slightly more helpful:
(gdb) enable count 2
Argument required (one or more breakpoint numbers).
(gdb) enable count
Argument required (hit count).
gdb/ChangeLog:
PR gdb/15678
* breakpoint.c (map_breakpoint_numbers): Check for empty args
string.
(enable_count_command): Check args for NULL value.
gdb/testsuite/ChangeLog:
PR gdb/15678
* gdb.base/ena-dis-br.exp: Test "enable count" for bad user input.
The buildbot shows that this test is still racy, and occasionally
fails with time outs on some machines. I'd like to get major issues
with load out of the way.
The test currently exits after 180s, which is just a random number,
that has no relation to what the .exp file considers a time out. This
commit makes the program wait a bit longer than what the .exp file
considers a time out, and, resets the timer for each iteration.
Tested on x86_64 Fedora 20, native and extended-remote gdbserver.
gdb/testsuite/
2015-02-06 Pedro Alves <palves@redhat.com>
* gdb.threads/attach-many-short-lived-threads.c (SECONDS): New
macro.
(seconds_left, again): New globals.
(main): Wait seconds_left in a 1-second sleep loop instead of
sleeping 180 seconds. If 'again' is set, reset the seconds
counter.
* gdb.threads/attach-many-short-lived-threads.exp (test): Set
'again' in the inferior before detaching. Print the seconds left.
(options): New global.
(top level): Build program with -DTIMEOUT=$timeout.
The buildbot shows that some machines FAIL this test frequently.
E.g.: https://sourceware.org/ml/gdb-testers/2015-q1/msg00997.html
If I stress my machine, I can sometimes see it fail too.
Bumping the 200 limit and tweaking the test to show the step count, I
get:
...
PASS: gdb.base/gdb-sigterm.exp: SIGTERM stepped 12 times
PASS: gdb.base/gdb-sigterm.exp: SIGTERM stepped 8 times
PASS: gdb.base/gdb-sigterm.exp: SIGTERM stepped 13 times
PASS: gdb.base/gdb-sigterm.exp: SIGTERM stepped 7 times
--> FAIL: gdb.base/gdb-sigterm.exp: SIGTERM stepped 228 times <--
PASS: gdb.base/gdb-sigterm.exp: SIGTERM stepped 11 times
PASS: gdb.base/gdb-sigterm.exp: SIGTERM stepped 13 times
PASS: gdb.base/gdb-sigterm.exp: SIGTERM stepped 12 times
PASS: gdb.base/gdb-sigterm.exp: SIGTERM stepped 8 times
PASS: gdb.base/gdb-sigterm.exp: SIGTERM stepped 9 times
PASS: gdb.base/gdb-sigterm.exp: SIGTERM stepped 7 times
PASS: gdb.base/gdb-sigterm.exp: SIGTERM stepped 11 times
PASS: gdb.base/gdb-sigterm.exp: SIGTERM stepped 8 times
...
Thinking that this might be a problem of SIGTERM reaching GDB, but
then the event loop taking too long to handle it, I hacked GDB to
print a debug log whenever the SIGTERM handler was called, and,
whenever the event loop finally calls the async SIGTERM handler.
Here's what I see:
infrun: 30011 [Thread 30011],
infrun: status->kind = stopped, signal = GDB_SIGNAL_TRAP
infrun: TARGET_WAITKIND_STOPPED
infrun: stop_pc = 0x4005de
--> infrun: got SIGTERM <--
infrun: stepping inside range [0x4005de-0x4005e0]
infrun: resume (step=1, signal=GDB_SIGNAL_0), ...
infrun: prepare_to_wait
--> infrun: handling async SIGTERM <--
Cannot execute this command while the target is running.
Use the "interrupt" command to stop the target
and then try again.
gdb.base/gdb-sigterm.exp: expect eof #27
FAIL: gdb.base/gdb-sigterm.exp: SIGTERM stepped 228 times
So, no delay on the GDB side. It just happens that occasionally it
takes more than 200 single-steps before SIGTERM even reaches GDB.
This just looks like a kernel/scheduling issue --- some extra usage
spike in the system (e.g., an I/O spike) might cause it for me. For
the build slaves, I'm guessing they're frequently busy enough to trip
on this often. Particularly more so now that we're having them run
tests in parallel mode.
The fix is to detect failure by timeout instead of counting single
steps. This should be more reliable. Indeed for me, after this
commit, I couldn't trigger a FAIL anymore, even after letting the test
run for an hour.
By timeout is also nicer in that a board file for a slow host/target
can increase it (like, e.g., an embedded GNU/Linux board).
Tested on x86_64 Fedora 20, native, gdbserver, and extended-remote
gdbserver.
gdb/testsuite/
2015-02-06 Pedro Alves <palves@redhat.com>
* gdb.base/gdb-sigterm.c (main): Use the TIMEOUT define to
determine how many seconds to pass to 'alarm'.
* gdb.base/gdb-sigterm.exp (top level): Build program with
-DTIMEOUT=$timeout.
(do_test): Return success/failure indication. Add more verbose
logging. Don't fail if 200 single steps are seen. Instead, fail
when the test times out.
(passes): New global.
(top level): Break the testing loop if testing fails on any
iteration. Use gdb_assert.
This commit modifies the test program gdb.base/info-os.c so that
it cleans up all allocated System V IPC objects when a fatal
error occurs. Without this, it was possible for the program
to leave IPC objects on the system, and such objects persist
until they are manually deleted or the system reboots.
I looked at changing the SysV IPC key for allocating the IPC objects to
IPC_PRIVATE. That would prevent errors due to namespace conflicts with the
key. However, the test needs to read the actual key number from the 'info
os' command output, and IPC_PRIVATE won't work for that.
gdb/testsuite/ChangeLog:
2015-02-04 Don Breazeal <donb@codesourcery.com>
* gdb.base/info-os.c (shmid, semid, msqid): Make variables static
and initialize them.
(ipc_cleanup): New function.
(main): Don't declare shmid, semid, and msqid. Add a call to
atexit so that we call ipc_cleanup on exit.
Running the testsuite with the native-extended-gdbserver.exp board and
passing a variant spec, like
make check RUNTESTFLAGS="--target_board=native-extended-gdbserver/-m32"
results in dejagnu trying to open a rsh connection to
"native-extended-gdbserver", which of course is wrong. The point of
this board is running things locally.
The issue is that the native-extended-gdbserver board does not clear
the "isremote" flag properly.
Reported by Sergio at:
https://sourceware.org/ml/gdb-patches/2015-02/msg00067.html
testsuite/
2015-02-04 Pedro Alves <palves@redhat.com>
* boards/native-extended-gdbserver.exp: Remove any target variant
specifications from the board name before clearing the isremote
flag from board_info.
Every type has to pay the price in memory usage for their presence.
The proper place for them is in the type_specific field which exists
for this purpose.
gdb/ChangeLog:
* dwarf2read.c (process_structure_scope): Update setting of
TYPE_VPTR_BASETYPE, TYPE_VPTR_FIELDNO.
* gdbtypes.c (internal_type_vptr_fieldno): New function.
(set_type_vptr_fieldno): New function.
(internal_type_vptr_basetype): New function.
(set_type_vptr_basetype): New function.
(get_vptr_fieldno): Update setting of TYPE_VPTR_FIELDNO,
TYPE_VPTR_BASETYPE.
(allocate_cplus_struct_type): Initialize vptr_fieldno.
(recursive_dump_type): Printing of vptr_fieldno, vptr_basetype ...
(print_cplus_stuff): ... moved here.
(copy_type_recursive): Don't copy TYPE_VPTR_BASETYPE.
* gdbtypes.h (struct main_type): Members vptr_fieldno, vptr_basetype
moved to ...
(struct cplus_struct_type): ... here. All uses updated.
(TYPE_VPTR_FIELDNO, TYPE_VPTR_BASETYPE): Rewrite.
(internal_type_vptr_fieldno, set_type_vptr_fieldno): Declare.
(internal_type_vptr_basetype, set_type_vptr_basetype): Declare.
* stabsread.c (read_tilde_fields): Update setting of
TYPE_VPTR_FIELDNO, TYPE_VPTR_BASETYPE.
gdb/testsuite/ChangeLog:
* gdb.base/maint.exp <maint print type argc>: Update expected output.
This commit adds a new exception, MAX_COMPLETIONS_REACHED_ERROR, to be
thrown whenever the completer has generated too many candidates to
be useful. A new user-settable variable, "max_completions", is added
to control this behaviour. A top-level completion limit is added to
complete_line_internal, as the final check to ensure the user never
sees too many completions. An additional limit is added to
default_make_symbol_completion_list_break_on, to halt time-consuming
symbol table expansions.
gdb/ChangeLog:
PR cli/9007
PR cli/11920
PR cli/15548
* cli/cli-cmds.c (complete_command): Notify user if max-completions
reached.
* common/common-exceptions.h (enum errors)
<MAX_COMPLETIONS_REACHED_ERROR>: New value.
* completer.h (get_max_completions_reached_message): New declaration.
(max_completions): Likewise.
(completion_tracker_t): New typedef.
(new_completion_tracker): New declaration.
(make_cleanup_free_completion_tracker): Likewise.
(maybe_add_completion_enum): New enum.
(maybe_add_completion): New declaration.
(throw_max_completions_reached_error): Likewise.
* completer.c (max_completions): New global variable.
(new_completion_tracker): New function.
(free_completion_tracker): Likewise.
(make_cleanup_free_completion_tracker): Likewise.
(maybe_add_completions): Likewise.
(throw_max_completions_reached_error): Likewise.
(complete_line): Remove duplicates and limit result to max_completions
entries.
(get_max_completions_reached_message): New function.
(gdb_display_match_list): Handle max_completions.
(_initialize_completer): New declaration and function.
* symtab.c: Include completer.h.
(completion_tracker): New static variable.
(completion_list_add_name): Call maybe_add_completion.
(default_make_symbol_completion_list_break_on_1): Renamed from
default_make_symbol_completion_list_break_on. Maintain
completion_tracker across calls to completion_list_add_name.
(default_make_symbol_completion_list_break_on): New function.
* top.c (init_main): Set rl_completion_display_matches_hook.
* tui/tui-io.c: Include completer.h.
(tui_old_rl_display_matches_hook): New static global.
(tui_rl_display_match_list): Notify user if max-completions reached.
(tui_setup_io): Save/restore rl_completion_display_matches_hook.
* NEWS (New Options): Mention set/show max-completions.
gdb/doc/ChangeLog:
* gdb.texinfo (Command Completion): Document new
"set/show max-completions" option.
gdb/testsuite/ChangeLog:
* gdb.base/completion.exp: Disable completion limiting for
existing tests. Add new tests to check completion limiting.
* gdb.linespec/ls-errs.exp: Disable completion limiting.
Consider the following declarations:
type Array_Type is array (Integer range <>) of Integer;
type Record_Type (N : Integer) is record
A : Array_Type (1 .. N);
end record;
R : Record_Type := Get (10);
It defines what Ada programers call a "discriminated record", where
"N" is a component of that record called a "discriminant", and where
"A" is a component defined as an array type whose upper bound is
equal to the value of the discriminant.
So far, we rely on a number of fairly complex GNAT-specific encodings
to handle this situation. This patch is to enhance GDB to be able to
print this record in the case where the compiler has been modified
to replace those encodings by pure DWARF constructs.
In particular, the debugging information generated for the record above
looks like the following. "R" is a record..
.uleb128 0x10 # (DIE (0x13e) DW_TAG_structure_type)
.long .LASF17 # DW_AT_name: "foo__record_type"
... whose is is of course dynamic (not our concern here)...
.uleb128 0xd # DW_AT_byte_size
.byte 0x97 # DW_OP_push_object_address
.byte 0x94 # DW_OP_deref_size
.byte 0x4
.byte 0x99 # DW_OP_call4
.long 0x19b
.byte 0x23 # DW_OP_plus_uconst
.uleb128 0x7
.byte 0x9 # DW_OP_const1s
.byte 0xfc
.byte 0x1a # DW_OP_and
.byte 0x1 # DW_AT_decl_file (foo.adb)
.byte 0x6 # DW_AT_decl_line
... and then has 2 members, fist "n" (our discriminant);
.uleb128 0x11 # (DIE (0x153) DW_TAG_member)
.ascii "n\0" # DW_AT_name
.byte 0x1 # DW_AT_decl_file (foo.adb)
.byte 0x6 # DW_AT_decl_line
.long 0x194 # DW_AT_type
.byte 0 # DW_AT_data_member_location
... and "A"...
.uleb128 0x11 # (DIE (0x181) DW_TAG_member)
.ascii "a\0" # DW_AT_name
.long 0x15d # DW_AT_type
.byte 0x4 # DW_AT_data_member_location
... which is an array ...
.uleb128 0x12 # (DIE (0x15d) DW_TAG_array_type)
.long .LASF18 # DW_AT_name: "foo__record_type__T4b"
.long 0x194 # DW_AT_type
... whose lower bound is implicitly 1, and the upper bound
a reference to DIE 0x153 = "N":
.uleb128 0x13 # (DIE (0x16a) DW_TAG_subrange_type)
.long 0x174 # DW_AT_type
.long 0x153 # DW_AT_upper_bound
This patch enhanced GDB to understand references to other DIEs
where the DIE's address is at an offset of its enclosing type.
The difficulty was that the address used to resolve the array's
type (R's address + 4 bytes) is different from the address used
as the base to compute N's address (an offset to R's address).
We're solving this issue by using a stack of addresses rather
than a single address when trying to resolve a type. Each address
in the stack corresponds to each containing level. For instance,
if resolving the field of a struct, the stack should contain
the address of the field at the top, and then the address of
the struct. That way, if the field makes a reference to an object
of the struct, we can retrieve the address of that struct, and
properly resolve the dynamic property references that struct.
gdb/ChangeLog:
* gdbtypes.h (struct dynamic_prop): New PROP_ADDR_OFFSET enum
kind.
* gdbtypes.c (resolve_dynamic_type_internal): Replace "addr"
parameter by "addr_stack" parameter.
(resolve_dynamic_range): Replace "addr" parameter by
"stack_addr" parameter. Update function documentation.
Update code accordingly.
(resolve_dynamic_array, resolve_dynamic_union)
(resolve_dynamic_struct, resolve_dynamic_type_internal): Likewise.
(resolve_dynamic_type): Update code, following the changes made
to resolve_dynamic_type_internal's interface.
* dwarf2loc.h (struct property_addr_info): New.
(dwarf2_evaluate_property): Replace "address" parameter
by "addr_stack" parameter. Adjust function documentation.
(struct dwarf2_offset_baton): New.
(struct dwarf2_property_baton): Update documentation of
field "referenced_type" to be more general. New field
"offset_info" in union data field.
* dwarf2loc.c (dwarf2_evaluate_property): Replace "address"
parameter by "addr_stack" parameter. Adjust code accordingly.
Add support for PROP_ADDR_OFFSET properties.
* dwarf2read.c (attr_to_dynamic_prop): Add support for
DW_AT_data_member_location attributes as well. Use case
statements instead of if/else condition.
gdb/testsuite/ChangeLog:
* gdb.ada/disc_arr_bound: New testcase.
Tested on x86_64-linux, no regression.
This is preparation work to avoid a regression in the Ada/varobj.
An upcoming patch is going to add support for types in DWARF
which have dynamic properties whose value is a reference to another
DIE.
Consider for instance the following declaration:
type Variant_Type (N : Int := 0) is record
F : String(1 .. N) := (others => 'x');
end record;
type Variant_Type_Access is access all Variant_Type;
VTA : Variant_Type_Access := null;
This declares a variable "VTA" which is an access (=pointer)
to a variant record Variant_Type. This record contains two
components, the first being "N" (the discriminant), and the
second being "F", an array whose lower bound is 1, and whose
upper bound depends on the value of "N" (the discriminant).
Of interest to us, here, is that second component ("F"), and
in particular its bounds. The debugging info, and in particular
the info for the array looks like the following...
.uleb128 0x9 # (DIE (0x91) DW_TAG_array_type)
.long .LASF16 # DW_AT_name: "bar__variant_type__T2b"
.long 0xac # DW_AT_GNAT_descriptive_type
.long 0x2cb # DW_AT_type
.long 0xac # DW_AT_sibling
.uleb128 0xa # (DIE (0xa2) DW_TAG_subrange_type)
.long 0xc4 # DW_AT_type
.long 0x87 # DW_AT_upper_bound
.byte 0 # end of children of DIE 0x91
... where the upper bound of the array's subrange type is a reference
to "n"'s DIE (0x87):
.uleb128 0x8 # (DIE (0x87) DW_TAG_member)
.ascii "n\0" # DW_AT_name
[...]
Once the patch to handle this dynamic property gets applied,
this is what happens when creating a varobj for variable "VTA"
(whose value is null), and then trying to list its children:
(gdb)
-var-create vta * vta
^done,name="vta",numchild="2",value="0x0",
type="bar.variant_type_access",has_more="0"
(gdb)
-var-list-children 1 vta
^done,numchild="2",
children=[child={name="vta.n",[...]},
child={name="vta.f",exp="f",
numchild="43877616", <<<<-----
value="[43877616]", <<<<-----
type="array (1 .. n) of character"}],
has_more="0"
It has an odd number of children.
In this case, we cannot really determine the number of children,
since that number depends on the value of a field in a record
for which we do not have a value. Up to now, the value we've been
displaying is zero - meaning we have an empty array.
What happens in this case, is that, because the VTA is a null pointer,
we're not able to resolve the pointer's target type, and therefore
end up asking ada_varobj_get_array_number_of_children to return
the number of elements in that array; for that, it relies blindly
on get_array_bounds, which assumes the type is no longer dynamic,
and therefore the reads the bound without seeing that it's value
is actually a reference rather than a resolved constant.
This patch prevents the issue by explicitly handling the case of
dynamic arrays, and returning zero child in that case.
gdb/ChangeLog:
* ada-varobj.c (ada_varobj_get_array_number_of_children):
Return zero if PARENT_VALUE is NULL and parent_type's
range type is dynamic.
gdb/testsuite/ChangeLog:
* gdb.ada/mi_var_array: New testcase.
Tested on x86_64-linux.
gdb/ChangeLog:
* NEWS: Mention gdb.Objfile.username.
* python/py-objfile.c (objfpy_get_username): New function.
(objfile_getset): Add "username".
gdb/doc/ChangeLog:
* python.texi (Objfiles In Python): Document Objfile.username.
gdb/testsuite/ChangeLog:
* gdb.python/py-objfile.exp: Add tests for objfile.username.
Add test for objfile.filename, objfile.username after objfile
has been unloaded.
This further improves this testcase to check the output of
our calls to gdb.lookup_type.
gdb/ChangeLog:
* gdb.python/py-lookup-type.exp (test_lookup_type): Change
the second test to print the name attribute of value
returned by the call to gdb.lookup_type, and adjust
the expected output accordingly.
GCC5 defaults to the GNU11 standard for C and warns by default for
implicit function declarations and implicit return types.
https://gcc.gnu.org/gcc-5/porting_to.html
Fixing these issues in the testsuite turns 9 untested and 17 unsupported
testcases into 417 new passes when compiling with GCC5.
gdb/testsuite/ChangeLog:
* gdb.arch/i386-bp_permanent.c (standard): New declaration.
* gdb.base/disp-step-fork.c: Include unistd.h.
* gdb.base/siginfo-obj.c: Include stdio.h.
* gdb.base/siginfo-thread.c: Likewise.
* gdb.mi/non-stop.c: Include unistd.h.
* gdb.mi/nsthrexec.c: Include stdio.h.
* gdb.mi/pthreads.c: Include unistd.h.
* gdb.modula2/unbounded1.c (main): Declare returns int.
* gdb.reverse/consecutive-reverse.c: Likewise.
* gdb.threads/create-fail.c: Include unistd.h.
* gdb.threads/killed.c: Likewise.
* gdb.threads/linux-dp.c: Likewise.
* gdb.threads/non-ldr-exc-1.c: Include stdio.h and string.h.
* gdb.threads/non-ldr-exc-2.c: Likewise.
* gdb.threads/non-ldr-exc-3.c: Likewise.
* gdb.threads/non-ldr-exc-4.c: Likewise.
* gdb.threads/pthreads.c: Include unistd.h.
(main): Declare returns int.
* gdb.threads/tls-main.c (foo): New declaration.
* gdb.threads/watchpoint-fork-mt.c: Define _GNU_SOURCE.
In the situation described in bug 17416 [1]:
* "set print object" is on;
* The variable object is a pointer to a struct, and it contains an
invalid value (e.g. NULL, or random uninitialized value);
* The variable object (struct) has a child which is also a pointer to a
struct;
* We try to use "-var-list-children".
... an exception thrown in value_ind can propagate too far and leave an
half-built variable object, leading to a wrong state. This patch adds a
TRY_CATCH to catch it and makes value_rtti_indirect_type return NULL in
that case, meaning that the type of the pointed object could not be
found.
A test for the fix is also added.
New in v2:
* Added test.
* Restructured "catch" code.
* Added details about the bug in commit log.
gdb/Changelog:
* valops.c (value_rtti_indirect_type): Catch exception thrown by
value_ind.
gdb/testsuite/ChangeLog
* gdb.mi/mi-var-list-children-invalid-grandchild.c: New file.
* gdb.mi/mi-var-list-children-invalid-grandchild.exp: New file.
[1] https://sourceware.org/bugzilla/show_bug.cgi?id=17416
Add a flag field is_noreturn to struct func_type. Make calling_convention
a small bit field to not increase the size of the struct. Set is_noreturn
if the new GCC5/DWARF5 DW_AT_noreturn is set on a DW_TAG_subprogram.
Use this information to warn the user before doing a finish or return from
a function that does not return normally to its caller.
(gdb) finish
warning: Function endless does not return normally.
Try to finish anyway? (y or n)
(gdb) return
warning: Function does not return normally to caller.
Make endless return now? (y or n)
gdb/ChangeLog
* dwarf2read.c (read_subroutine_type): Set TYPE_NO_RETURN from
DW_AT_noreturn.
* gdbtypes.h (struct func_type): Add is_noreturn field flag. Make
calling_convention an 8 bit bit field.
(TYPE_NO_RETURN): New macro.
* infcmd.c (finish_command): Query if function does not return
normally.
* stack.c (return_command): Likewise.
gdb/testsuite/ChangeLog
* gdb.base/noreturn-return.c: New file.
* gdb.base/noreturn-return.exp: New file.
* gdb.base/noreturn-finish.c: New file.
* gdb.base/noreturn-finish.exp: New file.
include/ChangeLog
* dwarf2.def (DW_AT_noreturn): New DWARF5 attribute.
The dwarf2.h addition and the code to emit the new attribute is already in
the gcc tree.
linux_nat_is_async_p currently always returns true, even when the
target is _not_ async. That confuses
gdb_readline_wrapper/gdb_readline_wrapper_cleanup, which
force-disables target-async while the secondary prompt is active. As
a result, when gdb_readline_wrapper returns, the target is left async,
even through it was sync to begin with.
That can result in weird bugs, like the one the test added by this
commit exposes.
Ref: https://sourceware.org/ml/gdb-patches/2015-01/msg00592.html
gdb/ChangeLog:
2015-01-23 Pedro Alves <palves@redhat.com>
* linux-nat.c (linux_is_async_p): New macro.
(linux_nat_is_async_p):
(linux_nat_terminal_inferior): Check whether the target can async
instead of whether it is already async.
(linux_nat_terminal_ours): Don't check whether the target is
async.
(linux_async_pipe): Use linux_is_async_p.
gdb/testsuite/ChangeLog:
2015-01-23 Pedro Alves <palves@redhat.com>
* gdb.threads/continue-pending-after-query.c: New file.
* gdb.threads/continue-pending-after-query.exp: New file.
gdb_interact is a small utility that we have found quite useful to debug
test cases.
Putting gdb_interact in a test suspends it and allows to interact with
gdb to inspect whatever you want. You can then type ">>>" to resume the
test execution. Of course, this is only for gdb devs. It wouldn't make
sense to leave a gdb_interact permanently in a test case.
When starting the interaction with the user, the script prints this
banner:
+------------------------------------------+
| Script interrupted, you can now interact |
| with by gdb. Type >>> to continue. |
+------------------------------------------+
Notes:
* When gdb is launched, the gdb_spawn_id variable (lib/gdb.exp) is
assigned -1. Given the name, I would expect it to contain the gdb
expect spawn id, which is needed for interact. I changed all places
that set gdb_spawn_id to -1 to set it to the actual gdb spawn id
instead.
* When entering the "interact" mode, the last (gdb) prompt is already
eaten by expect, so it doesn't show up on the terminal. Subsequent
prompts do appear though. We tried to print "(gdb)" just before the
interact to replace it. However, it could be misleading if you are
debugging an MI test case, it makes you think that you are typing in a
CLI prompt, when in reality it's MI. In the end I decided that since
the feature is for developers who know what they're doing and that one
is normally consciously using gdb_interact, the script doesn't need
to babysit the user.
* There are probably some quirks depending on where in the script
gdb_interact appears (e.g. it could interfere with following
commands and make them fail), but it works for most cases. Quirks can
always be fixed later.
The idea and original implementation was contributed by Anders
Granlund, a colleague of mine. Thanks to him.
gdb/testsuite/ChangeLog:
* gdb.base/statistics.exp: Assign spawn id to gdb_spawn_id.
* gdb.base/valgrind-db-attach.exp: Same.
* gdb.base/valgrind-infcall.exp: Same.
* lib/mi-support.exp (default_mi_gdb_start): Same.
* lib/prompt.exp (default_prompt_gdb_start): Same.
* lib/gdb.exp (default_gdb_spawn): Same.
(gdb_interact): New.
TBH while I always comment reasons for each of the compilation options in
reality I tried them all and chose that combination that needs the most simple
compile/compile-object-load.c (ld.so emulation) implementation.
gdb/ChangeLog
2015-01-22 Jan Kratochvil <jan.kratochvil@redhat.com>
* compile/compile.c (_initialize_compile): Use -fPIE for compile_args.
gdb/testsuite/ChangeLog
2015-01-22 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.compile/compile.exp (pointer to jit function): New test.
This patch updates two attach tests to use utility procs for checking if
the attach test should run and for launching the program to be attached, as
follows:
1) Use can_spawn_for_attach instead of is_remote target
2) Use spawn_wait_for_attach instead of exec/sleep
Tested (1) with i686-mingw32 host and i686-pc-linux-gnu build/target and
both with x86_64 Ubuntu.
gdb/testsuite/ChangeLog:
* gdb.base/attach-pie-noexec.exp: Use can_spawn_for_attach
instead of checking whether the target board is remote and
use spawn_wait_for_attach instead of exec/sleep.
* gdb.base/attach-twice.exp: Likewise.
Consider the following code:
type Table is array (Positive range <>) of Integer;
type Object (N : Integer) is record
Data : Table (1 .. N);
end record;
My_Object : Object := (N => 3, Data => (3, 5, 8));
Trying to print the range and length of the My_Object.Data array yields:
(gdb) print my_object.data'first
$1 = 1
(gdb) print my_object.data'last
$2 = 0
(gdb) print my_object.data'length
$3 = 0
The first one is correct, and that is thanks to the fact that
the lower bound is statically known. However, for the upper
bound, and consequently the array's length, the values are incorrect.
It should be:
(gdb) print my_object.data'last
$2 = 3
(gdb) print my_object.data'length
$3 = 3
What happens here is that ada_array_bound_from_type sees that
our array has a parallel "___XA" type, and therefore tries to
use it. In particular, it described our array's index type as:
[...]___XDLU_1__n, which means lower bound = 1, and upper bound
is value of "n". Unfortunately, ada_array_bound_from_type does
not have access to the discriminant, and is therefore unable to
compute the bound correctly.
Fortunately, at this stage, the bound has already been computed
a while ago, and therefore doesn't need to be re-computed here.
This patch fixes the issue by ignoring that ___XA type if the array
is marked as already fixed.
This also fixes the same issue with packed arrays.
gdb/ChangeLog:
* ada-lang.c (ada_array_bound_from_type): Ignore array's parallel
___XA type if the array has already been fixed.
gdb/testsuite/ChangeLog:
* gdb.ada/var_arr_attrs: New testcase.
Executing a gdb script that runs the inferior (from the command line
with -x), and has it hit breakpoints with breakpoint commands that
themselves run the target, is currently broken on async targets
(Linux, remote).
While we're executing a command list or a script, we force the
interpreter to be sync, which results in some functions nesting an
event loop and waiting for the target to stop, instead of returning
immediately and having the top level event loop handle the stop.
The issue with this bug is simply that bpstat_do_actions misses
checking whether the interpreter is sync. When we get here, in the
case of executing a script (or, when the interpreter is sync), the
program has already advanced to the next breakpoint, through
maybe_wait_sync_command_done. We need to process its breakpoints
immediately, just like with a sync target.
Tested on x86_64 Fedora 20.
gdb/
2015-01-14 Pedro Alves <palves@redhat.com>
PR gdb/17525
* breakpoint.c: Include "interps.h".
(bpstat_do_actions_1): Also check whether the interpreter is
async.
gdb/testsuite/
2015-01-14 Pedro Alves <palves@redhat.com>
Joel Brobecker <brobecker@adacore.com>
PR gdb/17525
* gdb.base/bp-cmds-execution-x-script.c: New file.
* gdb.base/bp-cmds-execution-x-script.exp: New file.
* gdb.base/bp-cmds-execution-x-script.gdb: New file.
Commit d3d4baed (PR python/17372 - Python hangs when displaying
help()) had the side effect of causing 'gdb -batch' to leave the
terminal in the wrong state if the program was run. E.g,.
$ echo 'main(){*(int*)0=0;}' | gcc -x c -; ./gdb/gdb -batch -ex r ./a.out
Program received signal SIGSEGV, Segmentation fault.
0x00000000004004ff in main ()
$
If you start typing the next command, seemingly nothing happens - GDB
left the terminal with echo disabled.
The issue is that that "r" ends up in fetch_inferior_event, which
calls reinstall_readline_callback_handler_cleanup, which causes
readline to prep the terminal (raw, echo disabled). But "-batch"
causes GDB to exit before the top level event loop is first started,
and then nothing de-preps the terminal.
The reinstall_readline_callback_handler_cleanup function's intro
comment mentions:
"Need to do this as we go back to the event loop, ready to process
further input."
but the implementation forgets the case of when the interpreter is
sync, which indicates we won't return to the event loop yet, or as in
the case of -batch, we have not started it yet.
The fix is to not install the readline callback in that case.
For the test, in this case, checking that command echo still works is
sufficient. Comparing stty output before/after running GDB is even
better. Because stty may not be available, the test tries both ways.
In any case, since expect's spawn (what we use to start gdb) creates a
new pseudo tty, another expect spawn or tcl exec after GDB exits would
not see the wrong terminal settings. So instead, the test spawns a
shell and runs stty and GDB in it.
Tested on x86_64 Fedora 20.
gdb/
2015-01-14 Pedro Alves <palves@redhat.com>
PR cli/17828
* infrun.c (reinstall_readline_callback_handler_cleanup): Don't
reinstall if the interpreter is sync.
gdb/testsuite/
2015-01-14 Pedro Alves <palves@redhat.com>
PR cli/17828
* gdb.base/batch-preserve-term-settings.c: New file.
* gdb.base/batch-preserve-term-settings.exp: New file.
gdb/Changelog:
* objfiles.c (objfile_filename): New function.
* objfiles.h (objfile_filename): Declare it.
(objfile_name): Add function comment.
* python/py-objfile.c (objfpy_lookup_objfile_by_name): Try both the
bfd file name (which may be realpath'd), and the original name.
gdb/testsuite/ChangeLog:
* gdb.python/py-objfile.exp: Test gdb.lookup_objfile on symlinked
binary.
A sanity-check in my release scripts caught something: After having
created the tarballs, I verify that no checked-in file disappeared
in the process, and lo and behod, it found that the following file
got wiped:
- gdb/testsuite/dg-extract-results.py:
And it's not part of the tarball either.
I don't understand while we delete all *.py files in gdb/testsuite,
since I don't see a rule that expected to create one. A run of the
testsuite also doesn't seem to be creating .py files there.
I traced this to the following commit, which unfortunately provided
no explanation. Perhaps we used to run some tests in the gdb/testsuite
directory and caused files to be left behind there. Perhaps we still
do today?
In the meantime, Executive Decision: In order to allow me to create
tarballs without losing files, I removed it. It's easy to put something
back if we find out why it might still be needed.
gdb/testsuite/ChangeLog:
* Makefile.in (clean mostlyclean): Do not delete *.py.
Tested on x86_64-linux by running the src-release.sh script again,
and this time, dg-extract-results.py no longer gets wiped.
The following change...
commit 1994afbf19
Date: Tue Dec 23 07:55:39 2014 -0800
Subject: Look up primitive types as symbols.
... caused the following regression:
% gdb
(gdb) set lang ada
(gdb) python print gdb.lookup_type('character')
Traceback (most recent call last):
File "<string>", line 1, in <module>
gdb.error: No type named character.
Error while executing Python code.
This is because the language_lookup_primitive_type_as_symbol call
was moved to the la_lookup_symbol_nonlocal hook. A couple of
implementations have been upated accordingly, but the Ada version
has not. This patch fixes this omission.
gdb/ChangeLog:
* ada-lang.c (ada_lookup_symbol_nonlocal): If name not found
in static block, then try searching for primitive types.
gdb/testsuite/ChangeLog:
* gdb.python/py-lookup-type.exp: New file.
The previous change to py-prompt.exp made it return without restoring
GDBFLAGS, resulting in breaking the following tests:
$ make check RUNTESTFLAGS="--target_board=native-gdbserver --directory=gdb.python"
...
Running src/gdb/testsuite/gdb.python/py-prompt.exp ...
Running src/gdb/testsuite/gdb.python/py-section-script.exp ...
ERROR: (timeout) GDB never initialized after 10 seconds.
ERROR: no fileid for gdbuild
ERROR: Couldn't send python print ('test') to GDB.
ERROR: no fileid for gdbuild
ERROR: Couldn't send python print (sys.version_info[0]) to GDB.
ERROR: no fileid for gdbuild
ERROR: Couldn't send python print (sys.version_info[1]) to GDB.
ERROR: no fileid for gdbuild
ERROR: no fileid for gdbuild
...
gdb/testsuite/
2015-01-12 Pedro Alves <palves@redhat.com>
* gdb.python/py-prompt.exp: When the board can't spawn for attach,
restore GDBFLAGS before returning.
for x86_64 -m32 run one gets:
+FAIL: gdb.python/py-frame.exp: test Frame.read_register(rip)
I do not have x32 OS here but the %rip test should PASS there I think.
On Sun, 11 Jan 2015 14:58:06 +0100, Yao Qi wrote:
With your patch applied, this test is skipped on 'x86_64 -m32'. I
prefer to increasing the test coverage, so how about extending the test
for 'x86_64 -m32'? I mean test Frame.read_register(eip)...
gdb/testsuite/ChangeLog
2015-01-12 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.python/py-frame.exp (test Frame.read_register(rip)): Use
is_amd64_regs_target and is_x86_like_target.
gdb/testsuite/ChangeLog:
* lib/dwarf.exp (Dwarf): Flag an error if a numeric attribute value
is given without an explicit form.
* gdb.dwarf2/arr-subrange.exp: Specify forms for all numeric
attributes.
* gdb.dwarf/corrupt.exp: Ditto.
* gdb.dwarf2/enum-type.exp: Ditto.
* gdb.trace/entry-values.exp: Ditto.
* gdb.trace/unavailable-dwarf-piece.exp: Ditto.
gdb/ChangeLog:
PR gdb/15830
* NEWS: The "maint demangle" command is renamed as "demangle".
* demangle.c: #include cli/cli-utils.h, language.h.
(demangle_command): New function.
(_initialize_demangle): Add new command "demangle".
* maint.c (maintenance_demangle): Stub out.
(_initialize_maint_cmds): Update help text for "maint demangle",
and mark as deprecated.
gdb/doc/ChangeLog:
* gdb.texinfo (Debugging C Plus Plus): Mention "demangle".
(Symbols): Ditto.
(Maintenance Commands): Delete docs for "maint demangle".
gdb/testsuite/ChangeLog:
* gdb.base/maint.exp: Remove references to "maint demangle".
* gdb.cp/demangle.exp: Update. "maint demangle" -> "demangle".
Add tests for explicitly specifying language to demangle.
* gdb.dlang/demangle.exp: Ditto.
This commit adds a non-stop mode test originally inspired by
signal-while-stepping-over-bp-other-thread.exp, that exposes the
thread starvation issues fixed by the previous patches. It sets a set
of threads stepping in parallel, and has one of them get a signal.
Without the previous fixes, this would fail with timeouts.
gdb/testsuite/
2015-01-09 Pedro Alves <palves@redhat.com>
* gdb.threads/non-stop-fair-events.c: New file.
* gdb.threads/non-stop-fair-events.exp: New file.
This patch fixes the watch_thread_num.exp test to work when the target
is better at making event handling be fair among threads.
I wrote patches that make GDB native and GDBserver event handling
fairer between threads. That is, if threads A and B both
simultaneously trigger some debug event, GDB will pick either A or B
at random, rather than always handling the event of A first. There's
code for that in the Linux backends (gdb and gdbserver) already, but
it can be improved, and only works in all-stop mode.
With those fixes in place, I found that the watch_thread_num.exp would
often time out. The problem is that the test only works _because_
event handling isn't as fair as intended. With the fairness fixes,
the test falls victim of PR10116 (gdb drops watchpoints on
multi-threaded apps) quite often.
To expand on the PR10116 reference, consider that stop events are
serialized to GDB core, through target_wait. Say a thread-specific
watchpoint as set on thread A. When the "right" thread and some other
"wrong" thread both trigger a watchpoint simultaneously, the target
may report the "wrong" thread's hit to GDB first (thread B). When
handling that event, GDB notices the watchpoint is for another thread,
and so shouldn't cause a user-visible stop. On resume, GDB saves the
now current value of the watched expression. Afterwards, the "right"
thread (thread A) reports its watchpoint trigger. But the watched
value hasn't changed since GDB last saved it, and so GDB doesn't
report the watchpoint hit to the user.
The way the test is written, the watchpoint is associated with the
first thread that happens to report an event. It happens that GDB is
processing events much more often for one of the threads, which
usually will be that same first thread.
Hacking the test with "set debug infrun 1", we see exactly that:
$ grep "infrun.*\[Thread.*," testsuite/gdb.log | sort | uniq -c | sort -nr
70 infrun: 8798 [Thread 8798],
37 infrun: 8798 [Thread 8802],
36 infrun: 8798 [Thread 8804],
36 infrun: 8798 [Thread 8803],
35 infrun: 8798 [Thread 8805],
34 infrun: 8798 [Thread 8806],
The first column shows the number of times the target reported an
event for that thread, from:
infrun: target_wait (-1, status) =
infrun: 8798 [Thread 8798],
infrun: status->kind = stopped, signal = GDB_SIGNAL_TRAP
This masks out the PR10116 issue.
However, if the target is better at giving equal priority to all
threads, the PR10116 issue happens often, so it may take quite a while
for the right thread to be the first to report its watchpoint event
just after the memory being watched really changed, resulting in test
time outs.
Here's the number of events handled for each thread on a gdbserver run
with the event fairness patches:
$ grep "infrun.*\[Thread.*," gdb.log | sort | uniq -c
2961 infrun: 13591 [Thread 13591],
2956 infrun: 13591 [Thread 13595],
2941 infrun: 13591 [Thread 13596],
2932 infrun: 13591 [Thread 13597],
2905 infrun: 13591 [Thread 13598],
2891 infrun: 13591 [Thread 13599],
Note how the number of events is much higher. The test routinely
takes over 10 seconds to finish on my machine rather than under a
second as with unpatched gdbserver, when it succeeds, but often it'll
fail with timeouts too.
So to make the test robust, this patch switches the tests to using
"awatch" instead of "watch", as access watchpoints don't care about
the watchpoint's "old value". With this, the test always finishes
quickly, and we can even bump the number of threads concurrently
writting to the shared variable, to have better assurance we're really
testing the case of the "wrong" thread triggering a watchpoint.
Here's the number of events I see for each thread on a run on my
machine, with a gdbserver patched with the event fairness series:
$ grep "infrun.*\[Thread.*," testsuite/gdb.log | sort | uniq -c
5 infrun: 5298 [Thread 5302],
4 infrun: 5298 [Thread 5303],
4 infrun: 5298 [Thread 5304],
4 infrun: 5298 [Thread 5305],
4 infrun: 5298 [Thread 5306],
4 infrun: 5298 [Thread 5307],
4 infrun: 5298 [Thread 5308],
4 infrun: 5298 [Thread 5309],
4 infrun: 5298 [Thread 5310],
4 infrun: 5298 [Thread 5311],
4 infrun: 5298 [Thread 5312],
4 infrun: 5298 [Thread 5313],
4 infrun: 5298 [Thread 5314],
4 infrun: 5298 [Thread 5315],
4 infrun: 5298 [Thread 5316],
gdb/testsuite/
2015-01-09 Pedro Alves <palves@redhat.com>
* gdb.base/annota1.exp (thread_test): Use srcfile and binfile from
the global scope. Set a breakpoint after all threads are started
rather than stepping over two source lines. Expect the prompt.
* gdb.base/watch_thread_num.c (threads_started_barrier): New
global.
(NUM): Now 15.
(main): Use threads_started_barrier to wait for all threads to
start. Main thread no longer calls thread_function. Exit after
180 seconds.
(loop): New function.
(thread_function): Wait on threads_started_barrier barrier. Call
'loop' at each iteration.
* gdb.base/watch_thread_num.exp: Continue to breakpoint after all
threads have started, instead of hardcoding number of "next"
steps. Use an access watchpoint instead of a write watchpoint.
These three test all spawn a few threads and then send a SIGSTOP to
their parent GDB in order to pause it while the new threads set things
up for the test. With a GDB patch that changes the inferior thread's
scheduling a bit, I sometimes see:
FAIL: gdb.threads/siginfo-threads.exp: catch signal 0 (timeout)
...
FAIL: gdb.threads/watchthreads-reorder.exp: reorder1: continue a (timeout)
...
FAIL: gdb.threads/ia64-sigill.exp: continue (timeout)
...
The issue is that the test program stops GDB before it had a chance of
processing the new thread's clone event:
(gdb) PASS: gdb.threads/siginfo-threads.exp: get pid
continue
Continuing.
Stopping GDB PID 21541.
Waiting till the threads initialize their TIDs.
FAIL: gdb.threads/siginfo-threads.exp: catch signal 0 (timeout)
On Linux (at least), new threads start stopped, and the debugger must
resume them. The fix is to make the test program wait for the new
threads to be running before stopping GDB.
gdb/testsuite/
2015-01-09 Pedro Alves <palves@redhat.com>
* gdb.threads/ia64-sigill.c (threads_started_barrier): New global.
(thread_func): Wait on barrier.
(main): Wait for all threads to start before stopping GDB.
* gdb.threads/siginfo-threads.c (threads_started_barrier): New
global.
(thread1_func, thread2_func): Wait on barrier.
(main): Wait for all threads to start before stopping GDB.
* gdb.threads/watchthreads-reorder.c (threads_started_barrier):
New global.
(thread1_func, thread2_func): Wait on barrier.
(main): Wait for all threads to start before stopping GDB.
Before the previous fixes, on Linux, this would trigger several
different problems, like:
[New LWP 27106]
[New LWP 27047]
warning: unable to open /proc file '/proc/-1/status'
[New LWP 27813]
[New LWP 27869]
warning: Can't attach LWP 11962: No child processes
Warning: couldn't activate thread debugging using libthread_db: Cannot find new threads: debugger service failed
warning: Unable to find libthread_db matching inferior's thread library, thread debugging will not be available.
gdb/testsuite/
2015-01-09 Pedro Alves <palves@redhat.com>
* gdb.threads/attach-many-short-lived-threads.c: New file.
* gdb.threads/attach-many-short-lived-threads.exp: New file.
[A test I wrote stumbled on a libthread_db issue related to thread
event breakpoints. See glibc PR17705:
[nptl_db: stale thread create/death events if debugger detaches]
https://sourceware.org/bugzilla/show_bug.cgi?id=17705
This patch avoids that whole issue by making GDB stop using thread
event breakpoints in the first place, which is good for other reasons
as well, anyway.]
Before PTRACE_EVENT_CLONE (Linux 2.6), the only way to learn about new
threads in the inferior (to attach to them) or to learn about thread
exit was to coordinate with the inferior's glibc/runtime, using
libthread_db. That works by putting a breakpoint at a magic address
which is called when a new thread is spawned, or when a thread is
about to exit. When that breakpoint is hit, all threads are stopped,
and then GDB coordinates with libthread_db to read data structures out
of the inferior to learn about what happened. Then the breakpoint is
single-stepped, and then all threads are re-resumed. This isn't very
efficient (stops all threads) and is more fragile (inferior's thread
list in memory may be corrupt; libthread_db bugs, etc.) than ideal.
When the kernel supports PTRACE_EVENT_CLONE (which we already make use
of), there's really no need to use libthread_db's event reporting
mechanism to learn about new LWPs. And if the kernel supports that,
then we learn about LWP exits through regular WIFEXITED wait statuses,
so no need for the death event breakpoint either.
GDBserver has been likewise skipping the thread_db events for a long
while:
https://sourceware.org/ml/gdb-patches/2007-10/msg00547.html
There's one user-visible difference: we'll no longer print about
threads being created and exiting while the program is running, like:
[Thread 0x7ffff7dbb700 (LWP 30670) exited]
[New Thread 0x7ffff7db3700 (LWP 30671)]
[Thread 0x7ffff7dd3700 (LWP 30667) exited]
[New Thread 0x7ffff7dab700 (LWP 30672)]
[Thread 0x7ffff7db3700 (LWP 30671) exited]
[Thread 0x7ffff7dcb700 (LWP 30668) exited]
This is exactly the same behavior as when debugging against remote
targets / gdbserver. I actually think that's a good thing (and as
such have listed this in the local/remote parity wiki page a while
ago), as the printing slows down the inferior. It's also a
distraction to keep bothering the user about short-lived threads that
she won't be able to interact with anyway. Instead, the user (and
frontend) will be informed about new threads that currently exist in
the program when the program next stops:
(gdb) c
...
* ctrl-c *
[New Thread 0x7ffff7963700 (LWP 7797)]
[New Thread 0x7ffff796b700 (LWP 7796)]
Program received signal SIGINT, Interrupt.
[Switching to Thread 0x7ffff796b700 (LWP 7796)]
clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:81
81 testq %rax,%rax
(gdb) info threads
A couple of tests had assumptions on GDB thread numbers that no longer
hold.
Tested on x86_64 Fedora 20.
gdb/
2014-01-09 Pedro Alves <palves@redhat.com>
Skip enabling event reporting if the kernel supports
PTRACE_EVENT_CLONE.
* linux-thread-db.c: Include "nat/linux-ptrace.h".
(thread_db_use_events): New function.
(try_thread_db_load_1): Check thread_db_use_events before enabling
event reporting.
(update_thread_state): New function.
(attach_thread): Use it. Check thread_db_use_events before
enabling event reporting.
(thread_db_detach): Check thread_db_use_events before disabling
event reporting.
(find_new_threads_callback): Check thread_db_use_events before
enabling event reporting. Update the thread's state if not using
libthread_db events.
gdb/testsuite/
2014-01-09 Pedro Alves <palves@redhat.com>
* gdb.threads/fork-thread-pending.exp: Switch to the main thread
instead of to thread 2.
* gdb.threads/signal-command-multiple-signals-pending.c (main):
Add barrier around each pthread_create call instead of around all
calls.
* gdb.threads/signal-command-multiple-signals-pending.exp (test):
Set a break on thread_function and have the child threads hit it
one at at a time.
We already skip "attach" tests if the target board is remote, in
dejagnu's sense, as we use TCL's exec to spawn the program on the
build machine. We should also skip these tests if testing with
"target remote" or other stub-like targets where "attach" doesn't make
sense.
Add a helper procedure that centralizes the checks a test that needs
to spawn a program for testing "attach" and make all test files that
use spawn_wait_for_attach check it.
gdb/testsuite/
2015-01-09 Pedro Alves <palves@redhat.com>
* lib/gdb.exp (can_spawn_for_attach): New procedure.
(spawn_wait_for_attach): Error out if can_spawn_for_attach returns
false.
* gdb.base/attach.exp: Use can_spawn_for_attach instead of
checking whether the target board is remote.
* gdb.multi/multi-attach.exp: Likewise.
* gdb.python/py-sync-interp.exp: Likewise.
* gdb.server/ext-attach.exp: Likewise.
* gdb.python/py-prompt.exp: Use can_spawn_for_attach before the
tests that need to attach, instead of checking whether the target
board is remote at the top of the file.
The test entry-values.exp doesn't recognize the call instructions
on MIPS, such as JAL, JALS and etc, so this patch sets call_insn
to match various jump and branch instructions first.
Currently, we assume the next instruction address of call instruction
is the address returned from foo, however it is not correct on MIPS
which has delay slot. We extend variable call_insn to match one
instruction after jump or branch instruction, so that
$returned_from_foo is correct on MIPS.
All tests in entry-values.exp are PASS.
gdb/testsuite:
2015-01-08 Yao Qi <yao@codesourcery.com>
* gdb.trace/entry-values.exp: Set call_insn for MIPS target.
The following python command fails:
(gdb) python print gdb.lookup_type('char').array(1, 0)
Traceback (most recent call last):
File "<string>", line 1, in <module>
ValueError: Array length must not be negative
Error while executing Python code.
The above is trying to create an empty array, which is fairly command
in Ada.
gdb/ChangeLog:
* python/py-type.c (typy_array_1): Do not raise negative-length
exception if N2 is equal to N1 - 1.
gdb/testsuite/ChangeLog:
* gdb.python/py-type.exp: Add a couple test about empty
array creation, and negative-length array creation.
This patch is to clean up gdb.trace/entry-values.exp as a preparation
of the next patch. It updates the comments to reflect the code.
One DIE generated in dwarf assembler is
GNU_call_site {
{low_pc "$bar_start + $bar_call_foo" addr}
{abstract_origin :$foo_label}
the DW_AT_low_pc attribute is the return address after the call, so I
rename variable bar_call_foo to returned_from_foo.
gdb/testsuite:
2014-12-29 Yao Qi <yao@codesourcery.com>
* gdb.trace/entry-values.exp: Update comments. Rename variable
bar_call_foo to returned_from_foo.
This patch fixes a problem when trying to insert a breakpoint on
a specific symbol defined in a specific file, eg:
break foo.c:func
This currently works for files in C/C++/Ada, etc, but doesn't always
work for Asm files. Analysis of the problem showed that this related
to a limitation in gas, which does not generate debug info for functions/
symbols. Thus, we have a symtab for the file ("info sources" shows
the file), but it contains no symbols.
When find_linespec_symbols is called in linespec_parse_basic, it calls
find_function_symbols, which uses add_matching_symbols_to_info to
collect all matching symbols.
That function does [pardon any mangled formatting]:
for (ix = 0; VEC_iterate (symtab_ptr, info->file_symtabs, ix, elt); ++ix)
{
if (elt == NULL)
{
iterate_over_all_matching_symtabs (info->state, name, VAR_DOMAIN,
collect_symbols, info,
pspace, 1);
search_minsyms_for_name (info, name, pspace);
}
else if (pspace == NULL || pspace == SYMTAB_PSPACE (elt))
{
/* Program spaces that are executing startup should have
been filtered out earlier. */
gdb_assert (!SYMTAB_PSPACE (elt)->executing_startup);
set_current_program_space (SYMTAB_PSPACE (elt));
iterate_over_file_blocks (elt, name, VAR_DOMAIN,
collect_symbols, info);
}
}
This iterates over the symtabs. In the failing use case, ELT is
non-NULL (points to the symtab for the .s file), so it calls
iterate_over_file_blocks. Herein is where the problem exists: it is
assumed that if NAME exists, it must exist in the given symtab -- a
reasonable assumption for "normal" (non-asm) cases. It never searches
minimal symbols (or in the global default symtab).
This patch fixes the problem by doing so. It is important to note that
iterating over minsyms is fairly expensive, so this patch only adds
that extra search if the language is language_asm and
iterate_over_file_blocks returns no symbols.
gdb/ChangeLog:
2014-12-20 Keith Seitz <keiths@redhat.com>
Mihail-Marian Nistor <mihail.nistor@freescale.com>
PR gdb/17394
* linespec.c (struct collect_minsyms): Add new member `symtab'.
(add_minsym): Handle cases where info.symtab is non-NULL.
(search_minsyms_for_name): Add new parameter `symtab'.
Handle limiting searches to a specific symtab.
(add_matching_symtabs_to_info): Search through minimal symbols
for language_asm files for which no new symbols are found.
gdb/testsuite/ChangeLog:
2014-12-20 Mihail-Marian Nistor <mihail.nistor@freescale.com>
PR gdb/17394
* gdb.linespec/break-asm-file.c: New file.
* gdb.linespec/break-asm-file.exp: New file.
* gdb.linespec/break-asm-file0.s: New file.
* gdb.linespec/break-asm-file1.s: New file.
This patch is the V2. V1 can be found in
https://sourceware.org/ml/gdb-patches/2012-05/msg00938.html
V2 is to address Joel's comment
<https://sourceware.org/ml/gdb-patches/2012-06/msg00289.html> about
keeping dumping floating point registers. Additionally, command
'info float' prints bits on nan2008 and abs2008.
------------------------------------------------------------------
The change below provides a MIPS-specific handler for the:
(gdb) info float
command. It provides information about the FPU type available (if any),
the FPU register width, and decodes the CP1 Floating Point Control and
Status Register (FCSR):
(gdb) print /x $fsr
$1 = 0xff83ffff
(gdb) info float
fpu type: double-precision
reg size: 32 bits
cond : 0 1 2 3 4 5 6 7
cause : inexact uflow oflow div0 inval unimp
mask : inexact uflow oflow div0 inval
flags : inexact uflow oflow div0 inval
rounding: -inf
flush : zero
One point to note about CP1.FCSR are the non-standard Flush-to-Nearest
and Flush-Override bits. They are not a part of the MIPS architecture and
take two positions reserved for an implementation-dependent use in the
architecture. They are present in all the FPU implementations made by
MIPS Technologies since the spin-off from SGI.
I haven't been able to track down a single other MIPS FPU implementation
that would make any use of these bits and they are required to be
hardwired to zero by the architecture specification if unimplemented.
Therefore I think it makes sense to report them in the current way.
GDB has no guaranteed access to the CP0 Processor Identification (PRId)
register to validate this feature properly and the ID information stored
in the CP1 Floating Point Implementation Register (FIR) is from my
experience not reliable enough (there's no Company ID available there for
once unlike in CP0.PRId and Processor ID is not guaranteed to be unique).
As a side note we should probably dump CP1.FIR information as well, as
there's useful stuff indicating some FPU features there. That's material
for another change however.
gdb/
2014-12-18 Nigel Stephens <nigel@mips.com>
Maciej W. Rozycki <macro@codesourcery.com>
* mips-tdep.c (print_fpu_flags): New function.
(mips_print_float_info): Likewise.
(mips_gdbarch_init): Install mips_print_float_info as gdbarch
print_float_info routine.
gdb/testsuite/
2014-12-18 Nigel Stephens <nigel@mips.com>
Maciej W. Rozycki <macro@codesourcery.com>
* gdb.base/float.exp: Handle the new output from "info float" on
MIPS targets.
On Sun, 14 Dec 2014 07:00:28 +0100, Yao Qi wrote:
The build on mingw host is broken because mingw has no mkdtemp.
../../../git/gdb/compile/compile.c: In function 'get_compile_file_tempdir':
../../../git/gdb/compile/compile.c:194:3: error: implicit declaration of function 'mkdtemp' [-Werror=implicit-function-declaration]
tempdir_name = mkdtemp (tname);
^
../../../git/gdb/compile/compile.c:194:16: error: assignment makes pointer from integer without a cast [-Werror]
tempdir_name = mkdtemp (tname);
^
cc1: all warnings being treated as errors
In the end I have managed to test it by Wine myself:
$ wine build_win32/gdb/gdb.exe -q build_win32/gdb/gdb.exe -ex start -ex 'compile code 1' -ex 'set confirm no' -ex quit
[...]
Temporary breakpoint 1, main (argc=1, argv=0x241418) at ../../gdb/gdb.c:29
29 args.argc = argc;
Could not load libcc1.so: Module not found.
Even if it managed to load libcc1.so (it needs host-dependent name libcc1.dll)
then it would soon end up at least on:
default_infcall_mmap:
error (_("This target does not support inferior memory allocation by mmap."));
As currently there is only:
linux-tdep.c:
set_gdbarch_infcall_mmap (gdbarch, linux_infcall_mmap);
While one could debug Linux targets from MS-Windows host I find it somehow
overcomplicated now when we are trying to get it running at least on native
Linux x86*.
The 'compile' project needs a larger port effort to run on MS-Windows.
gdb/ChangeLog
2014-12-17 Jan Kratochvil <jan.kratochvil@redhat.com>
Fix MinGW compilation.
* compile/compile.c (get_compile_file_tempdir): Call error if
!HAVE_MKDTEMP.
* config.in: Regenerate.
* configure: Regenerate.
* configure.ac (AC_CHECK_FUNCS): Add mkdtemp.
gdb/testsuite/ChangeLog
2014-12-17 Jan Kratochvil <jan.kratochvil@redhat.com>
Fix MinGW compilation.
* gdb.compile/compile-ops.exp: Update untested message if
!skip_compile_feature_tests.
* gdb.compile/compile-setjmp.exp: Likewise.
* gdb.compile/compile-tls.exp: Likewise.
* gdb.compile/compile.exp: Likewise.
* lib/gdb.exp (skip_compile_feature_tests): Check also "Command not
supported on this host".
This fixes a failure of the test case "complete 'info registers '" in
completion.exp on architectures where the user registers have numbers
above 99. In that case the output of "maint print user-registers" was
no longer indented, and the regexp in the test case failed to add them
to the list of expected completion results. The fix also swaps the
columns "Name" and "Nr", such that the indentation is always the same,
and to be consistent with the output of "maint print registers".
gdb/ChangeLog:
* user-regs.c (maintenance_print_user_registers): Swap "Nr" and
"Name" columns. Assure that the output is always indented.
gdb/testsuite/ChangeLog:
* gdb.base/completion.exp: Adjust to format changes of "maint
print user-registers".
When using aarch64 gdb with gdbserver, floating point registers are
not correctly displayed, as below:
(gdb) info registers fpsr fpcr
fpsr <unavailable>
fpcr <unavailable>
To fix these problems, the missing fpsr and fpcr registers are added
when floating point registers are read/write
Add test for aarch64 floating point
PR server/17457
gdb/gdbserver/
PR server/17457
* linux-aarch64-low.c (AARCH64_FPSR_REGNO): New define.
(AARCH64_FPCR_REGNO): Likewise.
(AARCH64_NUM_REGS): Update to include fpsr/fpcr registers.
(aarch64_fill_fpregset): Add missing fpsr/fpcr registers.
(aarch64_store_fpregset): Likewise.
gdb/testsuite/
PR server/17457
* gdb.arch/aarch64-fp.c: New file.
* gdb.arch/aarch64-fp.exp: New file.
Signed-off-by: Catalin Udma <catalin.udma@freescale.com>
It has been a while since we don't sync this file with GCC upstream,
and in the meantime some interesting things have happened. The most
interesting is the inclusion of a new dg-extract-results.py which is
apparently faster than its shell equivalent.
This merge will probably fix the bug described in
<https://sourceware.org/ml/gdb-patches/2014-12/msg00421.html>
Though I am still proposing the patch for upstream GCC. Once it gets
accepted, I will merge it too.
OK to apply?
gdb/testsuite/ChangeLog:
2014-12-15 Sergio Durigan Junior <sergiodj@redhat.com>
Merge dg-extract-results.{sh,py} from GCC upstream (r210243,
r210637, r210913, r211666, r215400, r215817).
2014-05-08 Richard Sandiford <rdsandiford@googlemail.com>
* dg-extract-results.py: New file.
* dg-extract-results.sh: Use it if the environment seems
suitable.
2014-05-20 Richard Sandiford <rdsandiford@googlemail.com>
* dg-extract-results.py (parse_run): Handle warnings that
are printed before a test harness is run.
2014-05-25 Richard Sandiford <rdsandiford@googlemail.com>
* dg-extract-results.py (Named): Remove __cmp__ method.
(output_variation): Use a key to sort variation.harnesses.
2014-06-14 Richard Sandiford <rdsandiford@googlemail.com>
* dg-extract-results.py: For Python 3, force sys.stdout to
handle surrogate escape sequences.
(safe_open): New function.
(output_segment, main): Use it.
2014-09-19 Segher Boessenkool <segher@kernel.crashing.org>
* dg-extract-results.py (Prog.result_re): Include options
in test name.
2014-10-02 Segher Boessenkool <segher@kernel.crashing.org>
* dg-extract-results.py (output_variation): Always sort if
do_sum.
When gdb starts, the lines that appear before the first prompt may get
paginated if the terminal in which the tests are ran is too small (in
terms of rows). These lines include the welcome/license message and
possibly more, such as "Reading symbols from...". Pagination is disabled
right after gdb is started (with "set height 0"), but this output happens
before we are able to set height.
If these lines get paginated, gdb waits for the user to press enter and
the test harness waits for gdb to print its prompt, resulting in a
deadlock.
My first idea was to launch gdb with --quiet. However, some lines are
still printed ("Reading symbols from...", some more stuff when attaching
with --pid, etc).
The proposed solution simply expects that pagination can occur after
starting gdb. If this is the case, it sends a "\n" and loops.
gdb/testsuite/Changelog:
* lib/gdb.exp (default_gdb_start): After starting gdb, loop
as long as we get pagination notifications.
Trying to print the value of a string whose size is not known at
compile-time before it gets assigned a value can lead to the following
internal error:
(gdb) p my_str
$1 =
/[...]/utils.c:1089: internal-error: virtual memory exhausted.
What happens is that my_str is described as a reference to an array
type whose bounds are dynamic. During the read of that variable's
value (in default_read_var_value), we end up resolving dynamic types
which, for reference types, makes us also resolve the target of that
reference type. This means we resolve our variable to a reference
to an array whose bounds are undefined, and unfortunately very far
appart.
So, when we pass that value to ada-valprint, and in particular to
da_val_print_ref, we eventually try to allocate too large of a buffer
corresponding to the (bogus) size of our array, hence the internal
error.
This patch fixes the problem by adding a size_check before trying
to print the dereferenced value. To perform this check, a function
that was previously specific to ada-lang.c (check_size) gets
exported, and renamed to something less prone to name collisions
(ada_ensure_varsize_limit).
gdb/ChangeLog:
* ada-lang.h (ada_ensure_varsize_limit): Declare.
* ada-lang.c (check_size): Remove advance declaration.
(ada_ensure_varsize_limit): Renames check_size.
Replace calls to check_size by calls to ada_ensure_varsize_limit
throughout.
* ada-valprint.c (ada_val_print_ref): Add call to
ada_ensure_varsize_limit. Add comment explaining why.
gdb/testsuite/ChangeLog:
* gdb.ada/str_uninit: New testcase.
https://sourceware.org/bugzilla/show_bug.cgi?id=17642
Regression since:
commit 012370f681
Author: Tom Tromey <tromey@redhat.com>
Date: Thu May 8 11:26:44 2014 -0600
handle VLA in a struct or union
Bugreport:
Regression with gdb scripts for Linux kernel
https://sourceware.org/ml/gdb/2014-08/msg00127.html
That big change after "else" is just reindentation.
gdb/ChangeLog
2014-12-13 Jan Kratochvil <jan.kratochvil@redhat.com>
PR symtab/17642
* gdbtypes.c (resolve_dynamic_type_internal): Apply check_typedef to
TYPE if not TYPE_CODE_TYPEDEF.
gdb/testsuite/ChangeLog
2014-12-13 Jan Kratochvil <jan.kratochvil@redhat.com>
PR symtab/17642
* gdb.base/vla-stub-define.c: New file.
* gdb.base/vla-stub.c: New file.
* gdb.base/vla-stub.exp: New file.
This final patch adds the new "compile" command and subcommands, and
all the machinery needed to make it work.
A shared library supplied by gcc is used for all communications with
gcc. Types and most aspects of symbols are provided directly by gdb
to the compiler using this library.
gdb provides some information about the user's code using plain text.
Macros are emitted this way, and DWARF location expressions (and
bounds for VLA) are compiled to C code.
This hybrid approach was taken because, on the one hand, it is better
to provide global declarations and such on demand; but on the other
hand, for local variables, translating DWARF location expressions to C
was much simpler than exporting a full compiler API to gdb -- the same
result, only easier to implement, understand, and debug.
In the ordinary mode, the user's expression is wrapped in a dummy
function. After compilation, gdb inserts the resulting object code
into the inferior, then calls this function.
Access to local variables is provided by noting which registers are
used by location expressions, and passing a structure of register
values into the function. Writes to registers are supported by
copying out these values after the function returns.
This approach was taken so that we could eventually implement other
more interesting features based on this same infrastructure; for
example, we're planning to investigate inferior-side breakpoint
conditions.
gdb/ChangeLog
2014-12-12 Phil Muldoon <pmuldoon@redhat.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
Tom Tromey <tromey@redhat.com>
* NEWS: Update.
* symtab.h (struct symbol_computed_ops) <generate_c_location>: New
field.
* p-lang.c (pascal_language_defn): Update.
* opencl-lang.c (opencl_language_defn): Update.
* objc-lang.c (objc_language_defn): Update.
* m2-lang.c (m2_language_defn): Update.
* language.h (struct language_defn) <la_get_compile_instance,
la_compute_program>: New fields.
* language.c (unknown_language_defn, auto_language_defn)
(local_language_defn): Update.
* jv-lang.c (java_language_defn): Update.
* go-lang.c (go_language_defn): Update.
* f-lang.c (f_language_defn): Update.
* dwarf2loc.h (dwarf2_compile_property_to_c): Declare.
* dwarf2loc.c (dwarf2_compile_property_to_c)
(locexpr_generate_c_location, loclist_generate_c_location): New
functions.
(dwarf2_locexpr_funcs, dwarf2_loclist_funcs): Update.
* defs.h (enum compile_i_scope_types): New.
(enum command_control_type) <compile_control>: New constant.
(struct command_line) <control_u>: New field.
* d-lang.c (d_language_defn): Update.
* compile/compile.c: New file.
* compile/compile-c-support.c: New file.
* compile/compile-c-symbols.c: New file.
* compile/compile-c-types.c: New file.
* compile/compile.h: New file.
* compile/compile-internal.h: New file.
* compile/compile-loc2c.c: New file.
* compile/compile-object-load.c: New file.
* compile/compile-object-load.h: New file.
* compile/compile-object-run.c: New file.
* compile/compile-object-run.h: New file.
* cli/cli-script.c (multi_line_command_p, print_command_lines)
(execute_control_command, process_next_line)
(recurse_read_control_structure): Handle compile_control.
* c-lang.h (c_get_compile_context, c_compute_program): Declare.
* c-lang.c (c_language_defn, cplus_language_defn)
(asm_language_defn, minimal_language_defn): Update.
* ada-lang.c (ada_language_defn): Update.
* Makefile.in (SUBDIR_GCC_COMPILE_OBS, SUBDIR_GCC_COMPILE_SRCS):
New variables.
(SFILES): Add SUBDIR_GCC_COMPILE_SRCS.
(HFILES_NO_SRCDIR): Add compile.h.
(COMMON_OBS): Add SUBDIR_GCC_COMPILE_OBS.
(INIT_FILES): Add SUBDIR_GCC_COMPILE_SRCS.
(compile.o, compile-c-types.o, compile-c-symbols.o)
(compile-object-load.o, compile-object-run.o, compile-loc2c.o)
(compile-c-support.o): New targets.
gdb/doc/ChangeLog
2014-12-12 Phil Muldoon <pmuldoon@redhat.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.texinfo (Altering): Update.
(Compiling and Injecting Code): New node.
gdb/testsuite/ChangeLog
2014-12-12 Phil Muldoon <pmuldoon@redhat.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
Tom Tromey <tromey@redhat.com>
* configure.ac: Add gdb.compile/.
* configure: Regenerate.
* gdb.compile/Makefile.in: New file.
* gdb.compile/compile-ops.exp: New file.
* gdb.compile/compile-ops.c: New file.
* gdb.compile/compile-tls.c: New file.
* gdb.compile/compile-tls.exp: New file.
* gdb.compile/compile-constvar.S: New file.
* gdb.compile/compile-constvar.c: New file.
* gdb.compile/compile-mod.c: New file.
* gdb.compile/compile-nodebug.c: New file.
* gdb.compile/compile-setjmp-mod.c: New file.
* gdb.compile/compile-setjmp.c: New file.
* gdb.compile/compile-setjmp.exp: New file.
* gdb.compile/compile-shlib.c: New file.
* gdb.compile/compile.c: New file.
* gdb.compile/compile.exp: New file.
* lib/gdb.exp (skip_compile_feature_tests): New proc.
This changes the DWARF assembler to allow comments in a location
expression, and also adds support for a few new opcodes I needed.
gdb/testsuite/ChangeLog
2014-12-12 Tom Tromey <tromey@redhat.com>
* lib/dwarf.exp (_location): Ignore blank lines. Allow comments.
Handle DW_OP_pick, DW_OP_skip, DW_OP_bra.
Provide a new completion function for the argument of "info
registers", "info all-registers", and the "lr" command in dbx mode.
Without this patch the default symbol completer is used, which is more
confusing than helpful.
Also add a test for this new feature to "completion.exp": Determine
the target's available set of registers/reggroups and compare this to
the completion of "info registers ". For determining the available
registers involve the new "maint print user-registers" command.
gdb/ChangeLog:
* completer.c: Include "target.h", "reggroups.h", and
"user-regs.h".
(reg_or_group_completer): New.
* completer.h (reg_or_group_completer): Declare.
* infcmd.c (_initialize_infcmd): Set reg_or_group_completer for
the "info registers" and "info all-registers" commands and the
dbx-mode "lr" command.
gdb/testsuite/ChangeLog:
* gdb.base/completion.exp: Add test for completion of "info
registers ".
1. Background information
The MIPS architecture, as originally designed and implemented in
mid-1980s has a uniform instruction word size that is 4 bytes, naturally
aligned. As such all MIPS instructions are located at addresses that
have their bits #1 and #0 set to zeroes, and any attempt to execute an
instruction from an address that has any of the two bits set to one
causes an address error exception. This may for example happen when a
jump-register instruction is executed whose register value used as the
jump target has any of these bits set.
Then in mid 1990s LSI sought a way to improve code density for their
TinyRISC family of MIPS cores and invented an alternatively encoded
instruction set in a joint effort with MIPS Technologies (then a
subsidiary of SGI). The new instruction set has been named the MIPS16
ASE (Application-Specific Extension) and uses a variable instruction
word size, which is 2 bytes (as the name of the ASE suggests) for most,
but there are a couple of exceptions that take 4 bytes, and then most of
the 2-byte instructions can be treated with a 2-byte extension prefix to
expand the range of the immediate operands used.
As a result instructions are no longer 4-byte aligned, instead they are
aligned to a multiple of 2. That left the bit #0 still unused for code
references, be it for the standard MIPS (i.e. as originally invented) or
for the MIPS16 instruction set, and based on that observation a clever
trick was invented that on one hand allowed the processor to be
seamlessly switched between the two instruction sets at any time at the
run time while on the other avoided the introduction of any special
control register to do that.
So it is the bit #0 of the instruction address that was chosen as the
selector and named the ISA bit. Any instruction executed at an even
address is interpreted as a standard MIPS instruction (the address still
has to have its bit #1 clear), any instruction executed at an odd
address is interpreted as a MIPS16 instruction.
To switch between modes ordinary jump instructions are used, such as
used for function calls and returns, specifically the bit #0 of the
source register used in jump-register instructions selects the execution
(ISA) mode for the following piece of code to be interpreted in.
Additionally new jump-immediate instructions were added that flipped the
ISA bit to select the opposite mode upon execution. They were
considered necessary to avoid the need to make register jumps in all
cases as the original jump-immediate instructions provided no way to
change the bit #0 at all.
This was all important for cases where standard MIPS and MIPS16 code had
to be mixed, either for compatibility with the existing binary code base
or to access resources not reachable from MIPS16 code (the MIPS16
instruction set only provides access to general-purpose registers, and
not for example floating-point unit registers or privileged coprocessor
0 registers) -- pieces of code in the opposite mode can be executed as
ordinary subroutine calls.
A similar approach has been more recently adopted for the MIPS16
replacement instruction set defined as the so called microMIPS ASE.
This is another instruction set encoding introduced to the MIPS
architecture. Just like the MIPS16 ASE, the microMIPS instruction set
uses a variable-length encoding, where each instruction takes a multiple
of 2 bytes. The ISA bit has been reused and for microMIPS-capable
processors selects between the standard MIPS and the microMIPS mode
instead.
2. Statement of the problem
To put it shortly, MIPS16 and microMIPS code pointers used by GDB are
different to these observed at the run time. This results in the same
expressions being evaluated producing different results in GDB and in
the program being debugged. Obviously it's the results obtained at the
run time that are correct (they define how the program behaves) and
therefore by definition the results obtained in GDB are incorrect.
A bit longer description will record that obviously at the run time the
ISA bit has to be set correctly (refer to background information above
if unsure why so) or the program will not run as expected. This is
recorded in all the executable file structures used at the run time: the
dynamic symbol table (but not always the static one!), the GOT, and
obviously in all the addresses embedded in code or data of the program
itself, calculated by applying the appropriate relocations at the static
link time.
While a program is being processed by GDB, the ISA bit is stripped off
from any code addresses, presumably to make them the same as the
respective raw memory byte address used by the processor to access the
instruction in the instruction fetch access cycle. This stripping is
actually performed outside GDB proper, in BFD, specifically
_bfd_mips_elf_symbol_processing (elfxx-mips.c, see the piece of code at
the very bottom of that function, starting with an: "If this is an
odd-valued function symbol, assume it's a MIPS16 or microMIPS one."
comment).
This function is also responsible for symbol table dumps made by
`objdump' too, so you'll never see the ISA bit reported there by that
tool, you need to use `readelf'.
This is however unlike what is ever done at the run time, the ISA bit
once present is never stripped off, for example a cast like this:
(short *) main
will not strip the ISA bit off and if the resulting pointer is intended
to be used to access instructions as data, for example for software
instruction decoding (like for fault recovery or emulation in a signal
handler) or for self-modifying code then the bit still has to be
stripped off by an explicit AND operation.
This is probably best illustrated with a simple real program example.
Let's consider the following simple program:
$ cat foobar.c
int __attribute__ ((mips16)) foo (void)
{
return 1;
}
int __attribute__ ((mips16)) bar (void)
{
return 2;
}
int __attribute__ ((nomips16)) foo32 (void)
{
return 3;
}
int (*foo32p) (void) = foo32;
int (*foop) (void) = foo;
int fooi = (int) foo;
int
main (void)
{
return foop ();
}
$
This is plain C with no odd tricks, except from the instruction mode
attributes. They are not necessary to trigger this problem, I just put
them here so that the program can be contained in a single source file
and to make it obvious which function is MIPS16 code and which is not.
Let's try it with Linux, so that everyone can repeat this experiment:
$ mips-linux-gnu-gcc -mips16 -g -O2 -o foobar foobar.c
$
Let's have a look at some interesting symbols:
$ mips-linux-gnu-readelf -s foobar | egrep 'table|foo|bar'
Symbol table '.dynsym' contains 7 entries:
Symbol table '.symtab' contains 95 entries:
55: 00000000 0 FILE LOCAL DEFAULT ABS foobar.c
66: 0040068c 4 FUNC GLOBAL DEFAULT [MIPS16] 12 bar
68: 00410848 4 OBJECT GLOBAL DEFAULT 21 foo32p
70: 00410844 4 OBJECT GLOBAL DEFAULT 21 foop
78: 00400684 8 FUNC GLOBAL DEFAULT 12 foo32
80: 00400680 4 FUNC GLOBAL DEFAULT [MIPS16] 12 foo
88: 00410840 4 OBJECT GLOBAL DEFAULT 21 fooi
$
Hmm, no sight of the ISA bit, but notice how foo and bar (but not
foo32!) have been marked as MIPS16 functions (ELF symbol structure's
`st_other' field is used for that).
So let's try to run and poke at this program with GDB. I'll be using a
native system for simplicity (I'll be using ellipses here and there to
remove unrelated clutter):
$ ./foobar
$ echo $?
1
$
So far, so good.
$ gdb ./foobar
[...]
(gdb) break main
Breakpoint 1 at 0x400490: file foobar.c, line 23.
(gdb) run
Starting program: .../foobar
Breakpoint 1, main () at foobar.c:23
23 return foop ();
(gdb)
Yay, it worked! OK, so let's poke at it:
(gdb) print main
$1 = {int (void)} 0x400490 <main>
(gdb) print foo32
$2 = {int (void)} 0x400684 <foo32>
(gdb) print foo32p
$3 = (int (*)(void)) 0x400684 <foo32>
(gdb) print bar
$4 = {int (void)} 0x40068c <bar>
(gdb) print foo
$5 = {int (void)} 0x400680 <foo>
(gdb) print foop
$6 = (int (*)(void)) 0x400681 <foo>
(gdb)
A-ha! Here's the difference and finally the ISA bit!
(gdb) print /x fooi
$7 = 0x400681
(gdb) p/x $pc
p/x $pc
$8 = 0x400491
(gdb)
And here as well...
(gdb) advance foo
foo () at foobar.c:4
4 }
(gdb) disassemble
Dump of assembler code for function foo:
0x00400680 <+0>: jr ra
0x00400682 <+2>: li v0,1
End of assembler dump.
(gdb) finish
Run till exit from #0 foo () at foobar.c:4
main () at foobar.c:24
24 }
Value returned is $9 = 1
(gdb) continue
Continuing.
[Inferior 1 (process 14103) exited with code 01]
(gdb)
So let's be a bit inquisitive...
(gdb) run
Starting program: .../foobar
Breakpoint 1, main () at foobar.c:23
23 return foop ();
(gdb)
Actually we do not like to run foo here at all. Let's run bar instead!
(gdb) set foop = bar
(gdb) print foop
$10 = (int (*)(void)) 0x40068c <bar>
(gdb)
Hmm, no ISA bit. Is it going to work?
(gdb) advance bar
bar () at foobar.c:9
9 }
(gdb) p/x $pc
$11 = 0x40068c
(gdb) disassemble
Dump of assembler code for function bar:
=> 0x0040068c <+0>: jr ra
0x0040068e <+2>: li v0,2
End of assembler dump.
(gdb) finish
Run till exit from #0 bar () at foobar.c:9
Program received signal SIGILL, Illegal instruction.
bar () at foobar.c:9
9 }
(gdb)
Oops!
(gdb) p/x $pc
$12 = 0x40068c
(gdb)
We're still there!
(gdb) continue
Continuing.
Program terminated with signal SIGILL, Illegal instruction.
The program no longer exists.
(gdb)
So let's try something else:
(gdb) run
Starting program: .../foobar
Breakpoint 1, main () at foobar.c:23
23 return foop ();
(gdb) set foop = foo
(gdb) advance foo
foo () at foobar.c:4
4 }
(gdb) disassemble
Dump of assembler code for function foo:
=> 0x00400680 <+0>: jr ra
0x00400682 <+2>: li v0,1
End of assembler dump.
(gdb) finish
Run till exit from #0 foo () at foobar.c:4
Program received signal SIGILL, Illegal instruction.
foo () at foobar.c:4
4 }
(gdb) continue
Continuing.
Program terminated with signal SIGILL, Illegal instruction.
The program no longer exists.
(gdb)
The same problem!
(gdb) run
Starting program:
/net/build2-lucid-cs/scratch/macro/mips-linux-fsf-gcc/isa-bit/foobar
Breakpoint 1, main () at foobar.c:23
23 return foop ();
(gdb) set foop = foo32
(gdb) advance foo32
foo32 () at foobar.c:14
14 }
(gdb) disassemble
Dump of assembler code for function foo32:
=> 0x00400684 <+0>: jr ra
0x00400688 <+4>: li v0,3
End of assembler dump.
(gdb) finish
Run till exit from #0 foo32 () at foobar.c:14
main () at foobar.c:24
24 }
Value returned is $14 = 3
(gdb) continue
Continuing.
[Inferior 1 (process 14113) exited with code 03]
(gdb)
That did work though, so it's the ISA bit only!
(gdb) quit
Enough!
That's the tip of the iceberg only though. So let's rebuild the
executable with some dynamic symbols:
$ mips-linux-gnu-gcc -mips16 -Wl,--export-dynamic -g -O2 -o foobar-dyn foobar.c
$ mips-linux-gnu-readelf -s foobar-dyn | egrep 'table|foo|bar'
Symbol table '.dynsym' contains 32 entries:
6: 004009cd 4 FUNC GLOBAL DEFAULT 12 bar
8: 00410b88 4 OBJECT GLOBAL DEFAULT 21 foo32p
9: 00410b84 4 OBJECT GLOBAL DEFAULT 21 foop
15: 004009c4 8 FUNC GLOBAL DEFAULT 12 foo32
17: 004009c1 4 FUNC GLOBAL DEFAULT 12 foo
25: 00410b80 4 OBJECT GLOBAL DEFAULT 21 fooi
Symbol table '.symtab' contains 95 entries:
55: 00000000 0 FILE LOCAL DEFAULT ABS foobar.c
69: 004009cd 4 FUNC GLOBAL DEFAULT 12 bar
71: 00410b88 4 OBJECT GLOBAL DEFAULT 21 foo32p
72: 00410b84 4 OBJECT GLOBAL DEFAULT 21 foop
79: 004009c4 8 FUNC GLOBAL DEFAULT 12 foo32
81: 004009c1 4 FUNC GLOBAL DEFAULT 12 foo
89: 00410b80 4 OBJECT GLOBAL DEFAULT 21 fooi
$
OK, now the ISA bit is there for a change, but the MIPS16 `st_other'
attribute gone, hmm... What does `objdump' do then:
$ mips-linux-gnu-objdump -Tt foobar-dyn | egrep 'SYMBOL|foo|bar'
foobar-dyn: file format elf32-tradbigmips
SYMBOL TABLE:
00000000 l df *ABS* 00000000 foobar.c
004009cc g F .text 00000004 0xf0 bar
00410b88 g O .data 00000004 foo32p
00410b84 g O .data 00000004 foop
004009c4 g F .text 00000008 foo32
004009c0 g F .text 00000004 0xf0 foo
00410b80 g O .data 00000004 fooi
DYNAMIC SYMBOL TABLE:
004009cc g DF .text 00000004 Base 0xf0 bar
00410b88 g DO .data 00000004 Base foo32p
00410b84 g DO .data 00000004 Base foop
004009c4 g DF .text 00000008 Base foo32
004009c0 g DF .text 00000004 Base 0xf0 foo
00410b80 g DO .data 00000004 Base fooi
$
Hmm, the attribute (0xf0, printed raw) is back, and the ISA bit gone
again.
Let's have a look at some DWARF-2 records GDB uses (I'll be stripping
off a lot here for brevity) -- debug info:
$ mips-linux-gnu-readelf -wi foobar
Contents of the .debug_info section:
[...]
Compilation Unit @ offset 0x88:
Length: 0xbb (32-bit)
Version: 4
Abbrev Offset: 62
Pointer Size: 4
<0><93>: Abbrev Number: 1 (DW_TAG_compile_unit)
<94> DW_AT_producer : (indirect string, offset: 0x19e): GNU C 4.8.0 20120513 (experimental) -meb -mips16 -march=mips32r2 -mhard-float -mllsc -mplt -mno-synci -mno-shared -mabi=32 -g -O2
<98> DW_AT_language : 1 (ANSI C)
<99> DW_AT_name : (indirect string, offset: 0x190): foobar.c
<9d> DW_AT_comp_dir : (indirect string, offset: 0x225): [...]
<a1> DW_AT_ranges : 0x0
<a5> DW_AT_low_pc : 0x0
<a9> DW_AT_stmt_list : 0x27
<1><ad>: Abbrev Number: 2 (DW_TAG_subprogram)
<ae> DW_AT_external : 1
<ae> DW_AT_name : foo
<b2> DW_AT_decl_file : 1
<b3> DW_AT_decl_line : 1
<b4> DW_AT_prototyped : 1
<b4> DW_AT_type : <0xc2>
<b8> DW_AT_low_pc : 0x400680
<bc> DW_AT_high_pc : 0x400684
<c0> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa)
<c2> DW_AT_GNU_all_call_sites: 1
<1><c2>: Abbrev Number: 3 (DW_TAG_base_type)
<c3> DW_AT_byte_size : 4
<c4> DW_AT_encoding : 5 (signed)
<c5> DW_AT_name : int
<1><c9>: Abbrev Number: 4 (DW_TAG_subprogram)
<ca> DW_AT_external : 1
<ca> DW_AT_name : (indirect string, offset: 0x18a): foo32
<ce> DW_AT_decl_file : 1
<cf> DW_AT_decl_line : 11
<d0> DW_AT_prototyped : 1
<d0> DW_AT_type : <0xc2>
<d4> DW_AT_low_pc : 0x400684
<d8> DW_AT_high_pc : 0x40068c
<dc> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa)
<de> DW_AT_GNU_all_call_sites: 1
<1><de>: Abbrev Number: 2 (DW_TAG_subprogram)
<df> DW_AT_external : 1
<df> DW_AT_name : bar
<e3> DW_AT_decl_file : 1
<e4> DW_AT_decl_line : 6
<e5> DW_AT_prototyped : 1
<e5> DW_AT_type : <0xc2>
<e9> DW_AT_low_pc : 0x40068c
<ed> DW_AT_high_pc : 0x400690
<f1> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa)
<f3> DW_AT_GNU_all_call_sites: 1
<1><f3>: Abbrev Number: 5 (DW_TAG_subprogram)
<f4> DW_AT_external : 1
<f4> DW_AT_name : (indirect string, offset: 0x199): main
<f8> DW_AT_decl_file : 1
<f9> DW_AT_decl_line : 21
<fa> DW_AT_prototyped : 1
<fa> DW_AT_type : <0xc2>
<fe> DW_AT_low_pc : 0x400490
<102> DW_AT_high_pc : 0x4004a4
<106> DW_AT_frame_base : 1 byte block: 9c (DW_OP_call_frame_cfa)
<108> DW_AT_GNU_all_tail_call_sites: 1
[...]
$
-- no sign of the ISA bit anywhere -- frame info:
$ mips-linux-gnu-readelf -wf foobar
[...]
Contents of the .debug_frame section:
00000000 0000000c ffffffff CIE
Version: 1
Augmentation: ""
Code alignment factor: 1
Data alignment factor: -4
Return address column: 31
DW_CFA_def_cfa_register: r29
DW_CFA_nop
00000010 0000000c 00000000 FDE cie=00000000 pc=00400680..00400684
00000020 0000000c 00000000 FDE cie=00000000 pc=00400684..0040068c
00000030 0000000c 00000000 FDE cie=00000000 pc=0040068c..00400690
00000040 00000018 00000000 FDE cie=00000000 pc=00400490..004004a4
DW_CFA_advance_loc: 6 to 00400496
DW_CFA_def_cfa_offset: 32
DW_CFA_offset: r31 at cfa-4
DW_CFA_advance_loc: 6 to 0040049c
DW_CFA_restore: r31
DW_CFA_def_cfa_offset: 0
DW_CFA_nop
DW_CFA_nop
DW_CFA_nop
[...]
$
-- no sign of the ISA bit anywhere -- range info (GDB doesn't use arange):
$ mips-linux-gnu-readelf -wR foobar
Contents of the .debug_ranges section:
Offset Begin End
00000000 00400680 00400690
00000000 00400490 004004a4
00000000 <End of list>
$
-- no sign of the ISA bit anywhere -- line info:
$ mips-linux-gnu-readelf -wl foobar
Raw dump of debug contents of section .debug_line:
[...]
Offset: 0x27
Length: 78
DWARF Version: 2
Prologue Length: 31
Minimum Instruction Length: 1
Initial value of 'is_stmt': 1
Line Base: -5
Line Range: 14
Opcode Base: 13
Opcodes:
Opcode 1 has 0 args
Opcode 2 has 1 args
Opcode 3 has 1 args
Opcode 4 has 1 args
Opcode 5 has 1 args
Opcode 6 has 0 args
Opcode 7 has 0 args
Opcode 8 has 0 args
Opcode 9 has 1 args
Opcode 10 has 0 args
Opcode 11 has 0 args
Opcode 12 has 1 args
The Directory Table is empty.
The File Name Table:
Entry Dir Time Size Name
1 0 0 0 foobar.c
Line Number Statements:
Extended opcode 2: set Address to 0x400681
Special opcode 6: advance Address by 0 to 0x400681 and Line by 1 to 2
Special opcode 7: advance Address by 0 to 0x400681 and Line by 2 to 4
Special opcode 55: advance Address by 3 to 0x400684 and Line by 8 to 12
Special opcode 7: advance Address by 0 to 0x400684 and Line by 2 to 14
Advance Line by -7 to 7
Special opcode 131: advance Address by 9 to 0x40068d and Line by 0 to 7
Special opcode 7: advance Address by 0 to 0x40068d and Line by 2 to 9
Advance PC by 3 to 0x400690
Extended opcode 1: End of Sequence
Extended opcode 2: set Address to 0x400491
Advance Line by 21 to 22
Copy
Special opcode 6: advance Address by 0 to 0x400491 and Line by 1 to 23
Special opcode 60: advance Address by 4 to 0x400495 and Line by -1 to 22
Special opcode 34: advance Address by 2 to 0x400497 and Line by 1 to 23
Special opcode 62: advance Address by 4 to 0x40049b and Line by 1 to 24
Special opcode 32: advance Address by 2 to 0x40049d and Line by -1 to 23
Special opcode 6: advance Address by 0 to 0x40049d and Line by 1 to 24
Advance PC by 7 to 0x4004a4
Extended opcode 1: End of Sequence
[...]
-- a-ha, the ISA bit is there! However it's not always right for some
reason, I don't have a small test case to show it, but here's an excerpt
from MIPS16 libc, a prologue of a function:
00019630 <__libc_init_first>:
19630: e8a0 jrc ra
19632: 6500 nop
00019634 <_init>:
19634: f000 6a11 li v0,17
19638: f7d8 0b08 la v1,15e00 <_DYNAMIC+0x15c54>
1963c: f400 3240 sll v0,16
19640: e269 addu v0,v1
19642: 659a move gp,v0
19644: 64f6 save 48,ra,s0-s1
19646: 671c move s0,gp
19648: d204 sw v0,16(sp)
1964a: f352 984c lw v0,-27828(s0)
1964e: 6724 move s1,a0
and the corresponding DWARF-2 line info:
Line Number Statements:
Extended opcode 2: set Address to 0x19631
Advance Line by 44 to 45
Copy
Special opcode 8: advance Address by 0 to 0x19631 and Line by 3 to 48
Special opcode 66: advance Address by 4 to 0x19635 and Line by 5 to 53
Advance PC by constant 17 to 0x19646
Special opcode 25: advance Address by 1 to 0x19647 and Line by 6 to 59
Advance Line by -6 to 53
Special opcode 33: advance Address by 2 to 0x19649 and Line by 0 to 53
Special opcode 39: advance Address by 2 to 0x1964b and Line by 6 to 59
Advance Line by -6 to 53
Special opcode 61: advance Address by 4 to 0x1964f and Line by 0 to 53
-- see that "Advance PC by constant 17" there? It clears the ISA bit,
however code at 0x19646 is not standard MIPS code at all. For some
reason the constant is always 17, I've never seen DW_LNS_const_add_pc
used with any other value -- is that a binutils bug or what?
3. Solution:
I think we should retain the value of the ISA bit in code references,
that is effectively treat them as cookies as they indeed are (although
trivially calculated) rather than raw memory byte addresses.
In a perfect world both the static symbol table and the respective
DWARF-2 records should be fixed to include the ISA bit in all the cases.
I think however that this is infeasible.
All the uses of `_bfd_mips_elf_symbol_processing' can not necessarily be
tracked down. This function is used by `elf_slurp_symbol_table' that in
turn is used by `bfd_canonicalize_symtab' and
`bfd_canonicalize_dynamic_symtab', which are public interfaces.
Similarly DWARF-2 records are used outside GDB, one notable if a bit
questionable is the exception unwinder (libgcc/unwind-dw2.c) -- I have
identified at least bits in `execute_cfa_program' and
`uw_frame_state_for', both around the calls to `_Unwind_IsSignalFrame',
that would need an update as they effectively flip the ISA bit freely;
see also the comment about MASK_RETURN_ADDR in gcc/config/mips/mips.h.
But there may be more places. Any change in how DWARF-2 records are
produced would require an update there and would cause compatibility
problems with libgcc.a binaries already distributed; given that this is
a static library a complex change involving function renames would
likely be required.
I propose therefore to accept the existing inconsistencies and deal with
them entirely within GDB. I have figured out that the ISA bit lost in
various places can still be recovered as long as we have symbol
information -- that'll have the `st_other' attribute correctly set to
one of standard MIPS/MIPS16/microMIPS encoding.
Here's the resulting change. It adds a couple of new `gdbarch' hooks,
one to update symbol information with the ISA bit lost in
`_bfd_mips_elf_symbol_processing', and two other ones to adjust DWARF-2
records as they're processed. The ISA bit is set in each address
handled according to information retrieved from the symbol table for the
symbol spanning the address if any; limits are adjusted based on the
address they point to related to the respective base address.
Additionally minimal symbol information has to be adjusted accordingly
in its gdbarch hook.
With these changes in place some complications with ISA bit juggling in
the PC that never fully worked can be removed from the MIPS backend.
Conversely, the generic dynamic linker event special breakpoint symbol
handler has to be updated to call the minimal symbol gdbarch hook to
record that the symbol is a MIPS16 or microMIPS address if applicable or
the breakpoint will be set at the wrong address and either fail to work
or cause SIGTRAPs (this is because the symbol is handled early on and
bypasses regular symbol processing).
4. Results obtained
The change fixes the example above -- to repeat only the crucial steps:
(gdb) break main
Breakpoint 1 at 0x400491: file foobar.c, line 23.
(gdb) run
Starting program: .../foobar
Breakpoint 1, main () at foobar.c:23
23 return foop ();
(gdb) print foo
$1 = {int (void)} 0x400681 <foo>
(gdb) set foop = bar
(gdb) advance bar
bar () at foobar.c:9
9 }
(gdb) disassemble
Dump of assembler code for function bar:
=> 0x0040068d <+0>: jr ra
0x0040068f <+2>: li v0,2
End of assembler dump.
(gdb) finish
Run till exit from #0 bar () at foobar.c:9
main () at foobar.c:24
24 }
Value returned is $2 = 2
(gdb) continue
Continuing.
[Inferior 1 (process 14128) exited with code 02]
(gdb)
-- excellent!
The change removes about 90 failures per MIPS16 multilib in mips-sde-elf
testing too, results for MIPS16 are now similar to that for standard
MIPS; microMIPS results are a bit worse because of host-I/O problems in
QEMU used instead of MIPSsim for microMIPS testing only:
=== gdb Summary ===
# of expected passes 14299
# of unexpected failures 187
# of expected failures 56
# of known failures 58
# of unresolved testcases 11
# of untested testcases 52
# of unsupported tests 174
MIPS16:
=== gdb Summary ===
# of expected passes 14298
# of unexpected failures 187
# of unexpected successes 2
# of expected failures 54
# of known failures 58
# of unresolved testcases 12
# of untested testcases 52
# of unsupported tests 174
microMIPS:
=== gdb Summary ===
# of expected passes 14149
# of unexpected failures 201
# of unexpected successes 2
# of expected failures 54
# of known failures 58
# of unresolved testcases 7
# of untested testcases 53
# of unsupported tests 175
2014-12-12 Maciej W. Rozycki <macro@codesourcery.com>
Maciej W. Rozycki <macro@mips.com>
Pedro Alves <pedro@codesourcery.com>
gdb/
* gdbarch.sh (elf_make_msymbol_special): Change type to `F',
remove `predefault' and `invalid_p' initializers.
(make_symbol_special): New architecture method.
(adjust_dwarf2_addr, adjust_dwarf2_line): Likewise.
(objfile, symbol): New declarations.
* arch-utils.h (default_elf_make_msymbol_special): Remove
prototype.
(default_make_symbol_special): New prototype.
(default_adjust_dwarf2_addr): Likewise.
(default_adjust_dwarf2_line): Likewise.
* mips-tdep.h (mips_unmake_compact_addr): New prototype.
* arch-utils.c (default_elf_make_msymbol_special): Remove
function.
(default_make_symbol_special): New function.
(default_adjust_dwarf2_addr): Likewise.
(default_adjust_dwarf2_line): Likewise.
* dwarf2-frame.c (decode_frame_entry_1): Call
`gdbarch_adjust_dwarf2_addr'.
* dwarf2loc.c (dwarf2_find_location_expression): Likewise.
* dwarf2read.c (create_addrmap_from_index): Likewise.
(process_psymtab_comp_unit_reader): Likewise.
(add_partial_symbol): Likewise.
(add_partial_subprogram): Likewise.
(process_full_comp_unit): Likewise.
(read_file_scope): Likewise.
(read_func_scope): Likewise. Call `gdbarch_make_symbol_special'.
(read_lexical_block_scope): Call `gdbarch_adjust_dwarf2_addr'.
(read_call_site_scope): Likewise.
(dwarf2_ranges_read): Likewise.
(dwarf2_record_block_ranges): Likewise.
(read_attribute_value): Likewise.
(dwarf_decode_lines_1): Call `gdbarch_adjust_dwarf2_line'.
(new_symbol_full): Call `gdbarch_adjust_dwarf2_addr'.
* elfread.c (elf_symtab_read): Don't call
`gdbarch_elf_make_msymbol_special' if unset.
* mips-linux-tdep.c (micromips_linux_sigframe_validate): Strip
the ISA bit from the PC.
* mips-tdep.c (mips_unmake_compact_addr): New function.
(mips_elf_make_msymbol_special): Set the ISA bit in the symbol's
address appropriately.
(mips_make_symbol_special): New function.
(mips_pc_is_mips): Set the ISA bit before symbol lookup.
(mips_pc_is_mips16): Likewise.
(mips_pc_is_micromips): Likewise.
(mips_pc_isa): Likewise.
(mips_adjust_dwarf2_addr): New function.
(mips_adjust_dwarf2_line): Likewise.
(mips_read_pc, mips_unwind_pc): Keep the ISA bit.
(mips_addr_bits_remove): Likewise.
(mips_skip_trampoline_code): Likewise.
(mips_write_pc): Don't set the ISA bit.
(mips_eabi_push_dummy_call): Likewise.
(mips_o64_push_dummy_call): Likewise.
(mips_gdbarch_init): Install `mips_make_symbol_special',
`mips_adjust_dwarf2_addr' and `mips_adjust_dwarf2_line' gdbarch
handlers.
* solib.c (gdb_bfd_lookup_symbol_from_symtab): Get
target-specific symbol address adjustments.
* gdbarch.h: Regenerate.
* gdbarch.c: Regenerate.
2014-12-12 Maciej W. Rozycki <macro@codesourcery.com>
gdb/testsuite/
* gdb.base/func-ptrs.c: New file.
* gdb.base/func-ptrs.exp: New file.
On Linux native, if dprintfs are inserted when detaching, they are left
in the inferior which causes it to crash from a SIGTRAP. It also happens
with dprintfs on remote targets, when set disconnected-dprintf is off.
The rationale of the line modified by the patch was to leave dprintfs
inserted in order to support disconnected dprintfs. However, not all
dprintfs are persistent. Also, there's no reason other kinds of
breakpoints can't be persistent either. So this replaces the bp_dprintf
check with a check on whether the location is persistent.
bl->target_info.persist will be 1 only if disconnected-dprintf is on and
we are debugging a remote target. On native, it will always be 0,
regardless of the value of disconnected-dprintf. This makes sense, since
disconnected dprintfs are not supported by the native target.
One issue about the test is that it does not pass when using
--target_board=native-extended-gdbserver, partly due to bug 17302 [1].
One quick hack I tried for this was to add a useless "next" between the
call to getpid() and detach, which avoids the bug. There is still one
case where the test fails, and that is with:
- breakpoint always-inserted on
- dprintf-style agent
- disconnected-dprintf on
What happens is that my detach does not actually detach the process,
because some persistent commands (the disconnected dprintf) is present.
However since gdbserver is ran with --once, when gdb disconnects,
gdbserver goes down and takes with it all the processes it spawned and
that are still under its control (which includes my test process).
When the test checks if the test process is still alive, it obvisouly
fails. Investigating about that led me to ask a question on the ML [2]
about the behavior of detach.
Until the remote case is sorted out, the problematic test is marked as
KFAIL.
[1] https://sourceware.org/bugzilla/show_bug.cgi?id=17302
[2] https://sourceware.org/ml/gdb/2014-08/msg00115.html
gdb/Changelog:
PR breakpoints/17012
* breakpoint.c (remove_breakpoints_pid): Skip removing
breakpoint if it is marked as persistent.
gdb/testsuite/ChangeLog:
PR breakpoints/17012
* gdb.base/dprintf-detach.c: New file.
* gdb.base/dprintf-detach.exp: New file.
This patch introduces a function in gdbserver-support.exp to find out
whether the current target is GDBserver.
The code was inspired from gdb.trace/qtro.exp, so it replaces the code
there by a call to the new function.
gdb/testsuite/ChangeLog:
* gdb.trace/qtro.exp: Replace gdbserver detection code by...
* lib/gdb.exp (target_is_gdbserver): New
procedure.
This patch is to revert my previous commit, because we shouldn't remove
gdbtk bits from gdb/testsuite/configure.ac while keep gdbtk bits in
gdb/configure.ac.
gdb/testsuite:
2014-12-05 Yao Qi <yao@codesourcery.com>
Revert:
* configure.ac: Remove AC_ARG_ENABLE for gdbtk. Don't invoke
AC_CONFIG_SUBDIRS(gdb.gdbtk).
* configure: Re-generated.
Some gdb.guile tests such as scm-error.exp copies .scm file to
${subdir}/, how ${subdir} doesn't exist in parallel testing
(outputs/${subdir} exists).
$ make -j3 check TESTS='gdb.guile/scm-section-script.exp gdb.guile/scm-error.exp gdb.guile/scm-frame-args.exp'
ERROR: remote_download to host of ../../../../git/gdb/testsuite/gdb.guile/scm-section-script.scm to gdb.guile/t-scm-section-script.scm: cp: cannot create regular file 'gdb.guile/t-scm-section-script.scm': No such file or directory
ERROR: remote_download to host of ../../../../git/gdb/testsuite/gdb.guile/scm-frame-args.scm to gdb.guile/t-scm-frame-args.scm: cp: cannot create regular file
'gdb.guile/t-scm-frame-args.scm': No such file or directory
ERROR: remote_download to host of ../../../../git/gdb/testsuite/gdb.guile/scm-error-1.scm to gdb.guile/t-scm-error-1.scm: cp: cannot create regular file 'gdb.guile/t-scm-error-1.scm': No such file or directory
This patch is to remove the third argument of gdb_remote_download, so
that gdb_remote_download can return the correct location.
Further, these tests only copy .scm files to a different name. From what
I can tell from the comments, looks we do this to avoid clobbering file
in in-tree build. However, if source and dest of copy are the same, the
operation is no-op. So it makes few sense to copy .scm files to a
different names. I tried in-tree build/test with this patch, test
result isn't changed.
gdb/testsuite:
2014-12-05 Yao Qi <yao@codesourcery.com>
* gdb.guile/scm-error.exp: Remove the third argument to
gdb_remote_download.
* gdb.guile/scm-frame-args.exp: Likewise.
* gdb.guile/scm-section-script.exp: Likewise.
This patch is to use standard_testfile in i386-bp_permanent.exp to replace
existing setting to testfile, srcfile and binfile. So it fixes a problem
in i386-bp_permanent.exp in parallel testing.
$ make -j3 check TESTS='gdb.guile/scm-section-script.exp gdb.arch/i386-bp_permanent.exp'
....
gdb compile failed, /usr/bin/ld: cannot open output file x86/gdb/testsuite/gdb.arch/i386-bp_permanent: No such file or directory
collect2: error: ld returned 1 exit status
gdb/testsuite:
2014-12-05 Yao Qi <yao@codesourcery.com>
* gdb.arch/i386-bp_permanent.exp: Use standard_testfile.
Address issues triggered by the MIPS ISA bit handling change, usually in
tests that make artificial DWARF-2 records:
* gdb.cp/expand-psymtabs-cxx.exp -- this test is debugging an object file
and assuming addresses will be 0; with the ISA bit set code addresses
are 1 instead:
(gdb) PASS: gdb.cp/expand-psymtabs-cxx.exp: set language c++
p 'method(long)'
$1 = {void (long)} 0x1 <method(long)>
(gdb) FAIL: gdb.cp/expand-psymtabs-cxx.exp: before expand
p method
$2 = {void (long)} 0x1 <method(long)>
(gdb) FAIL: gdb.cp/expand-psymtabs-cxx.exp: force expand
p 'method(long)'
$3 = {void (long)} 0x1 <method(long)>
(gdb) FAIL: gdb.cp/expand-psymtabs-cxx.exp: after expand
Fix by matching any hex number, there's no value AFAICT for the test
in matching 0 exactly, and I suppose the method's offset within
section can be non-zero for some other reasons on other targets too.
* gdb.cp/nsalias.exp -- this assumes instructions can be aligned
arbitrarily and places code labels at odd addreses, setting the ISA
bit and wreaking havoc:
(gdb) PASS: gdb.cp/nsalias.exp: print outer::inner::innermost::x
list outer::inner::innermost::foo
Function "outer::inner::innermost::foo" not defined.
(gdb) FAIL: gdb.cp/nsalias.exp: list outer::inner::innermost::foo
break *outer::inner::innermost::foo
No symbol "foo" in namespace "outer::inner::innermost".
(gdb) FAIL: gdb.cp/nsalias.exp: setting breakpoint at
*outer::inner::innermost::foo
delete $bpnum
No breakpoint number 6.
(gdb) FAIL: gdb.cp/nsalias.exp: (outer::inner::innermost): delete $bpnum
-- etc., etc... Fix by aligning labels to 4; required by many
processors.
* gdb.dwarf2/dw2-canonicalize-type.exp, gdb.dwarf2/dw2-empty-pc-range.exp,
gdb.dwarf2/pr11465.exp -- these assume an instruction and consequently
a function can take as little as 1 byte, which makes it impossible to
look up a code symbol by an address with the ISA bit set as the
address is already beyond the end of the function:
(gdb) ptype f
No symbol "f" in current context.
(gdb) FAIL: gdb.dwarf2/dw2-canonicalize-type.exp: ptype f
(gdb) PASS: gdb.dwarf2/dw2-empty-pc-range.exp: empty range before CU load
ptype realrange
No symbol "realrange" in current context.
(gdb) FAIL: gdb.dwarf2/dw2-empty-pc-range.exp: valid range after CU load
(gdb) p N::c.C
Cannot take address of method C.
(gdb) FAIL: gdb.dwarf2/pr11465.exp: p N::c.C
-- fix by increasing the size of the function to 4 (perhaps code in
gdb/mips-tdep.c could look up code symbols up to twice, with and
failing that without the ISA bit set, but it seems wrong to me to
implement specific handling for invalid code just to satisfy test
cases that assume too much about the target).
* gdb.dwarf2/dw2-case-insensitive.exp -- an artificial code label is
created, but does not work because data (a `.align' pseudo-op in this
case) follows and as a result the label has no MIPS16 or microMIPS
annotation in the symbol table:
(gdb) PASS: gdb.dwarf2/dw2-case-insensitive.exp: set case-sensitive off
info functions fUnC_lang
All functions matching regular expression "fUnC_lang":
File file1.txt:
foo FUNC_lang(void);
Non-debugging symbols:
0x004006e0 FUNC_lang_start
(gdb) FAIL: gdb.dwarf2/dw2-case-insensitive.exp: regexp case-sensitive off
-- fix by adding a `.insn' pseudo-op on MIPS targets; the pseudo-op
marks data as instructions.
* gdb.dwarf2/dw2-stack-boundary.exp -- the test case enables complaints
and assumes none will be issued beyond ones explicitly arranged by the
test case, however overlapping sections are noticed while minimal
symbols are looked up by `mips_adjust_dwarf2_addr' in DWARF-2 record
processing:
(gdb) set complaints 100
(gdb) PASS: gdb.dwarf2/dw2-stack-boundary.exp: set complaints 100
file ./dw2-stack-boundary
Reading symbols from ./dw2-stack-boundary...location description stack
underflow...location description stack overflow...unexpected overlap
between:
(A) section `.reginfo' from `.../gdb.dwarf2/dw2-stack-boundary' [0x0, 0x18)
(B) section `*COM*' from `.../gdb.dwarf2/dw2-stack-boundary' [0x0, 0x0).
Will ignore section B...unexpected overlap between:
(A) section `.reginfo' from `.../gdb.dwarf2/dw2-stack-boundary' [0x0, 0x18)
(B) section `*UND*' from `.../gdb.dwarf2/dw2-stack-boundary' [0x0, 0x0).
Will ignore section B...unexpected overlap between:
(A) section `.reginfo' from `.../gdb.dwarf2/dw2-stack-boundary' [0x0, 0x18)
(B) section `*ABS*' from `.../gdb.dwarf2/dw2-stack-boundary' [0x0, 0x0).
Will ignore section B...done.
(gdb) FAIL: gdb.dwarf2/dw2-stack-boundary.exp: check partial symtab errors
-- fix by ignoring any extra noise as long as what we look for is
found.
* gdb.cp/expand-psymtabs-cxx.exp: Accept any address of
`method(long)', not just 0x0.
* gdb.cp/nsalias.exp: Align code labels to 4.
* gdb.dwarf2/dw2-canonicalize-type.S (main): Expand to 4-bytes.
* gdb.dwarf2/dw2-empty-pc-range.S (main): Likewise.
* gdb.dwarf2/pr11465.S (_ZN1N1cE): Likewise.
* gdb.dwarf2/dw2-case-insensitive.c (START_INSNS): New macro.
(cu_text_start, FUNC_lang_start): Use `START_INSNS'.
* gdb.dwarf2/dw2-stack-boundary.exp: Accept noise in complaints.
The test case builds two copies of the program, one with the compile
option "ldflags=-Wl,-Ttext=0x1000000" and the other with the address
changed to 0x2000000. However, when linking with ld.bfd, the
resulting executables crash early in ld.so on S390 and i386.
Analysis of the crash: The default linker script establishes a certain
order of loadable sections, and the option "-Ttext" effectively splits
these into an "unaffected" lot (everything before .text) and an
"affected" lot. The affected lot is placed at the given address,
whereas the unaffected lot stays at its default address. The
unaffected lot starts at an aligned address plus Elf header sizes,
which is good if it is the first LOAD segment (like on AMD64). But if
the affected lot comes first instead (like on S390 and i386), the PHDR
doesn't fit there and is placed *outside* any LOAD segments. Then the
PHDR is not mapped when the loader gets control, and the loader runs
into a segmentation fault while trying to access it.
Since we are lucky about the order of segments on AMD64, the test
succeeds there, but the resulting binaries are unusually large -- 2.1M
each, with lots of padding within.
When replacing '-Ttext' by '-Ttext-segment', the linker moves all
segments consistently, the binaries have normal sizes, and the test
case succeeds on all mentioned platforms.
Since old versions of the gold linker don't support '-Ttext-segment',
the patch also adds logic for falling back to '-Ttext'.
gdb/testsuite/ChangeLog:
* gdb.base/execl-update-breakpoints.exp: Specify the link address
with '-Ttext-segment' instead of '-Ttext'. Fall back to '-Ttext'
if the linker doesn't understand this.
The message displayed when using help() changed a bit with time, so this
adjusts the test accordingly.
gdb/testsuite/ChangeLog:
* gdb.python/python.exp: Change expected reply to help().
When I skim configure.ac and Makefile.in in gdb/testsuite, I happen to
see that directory gdb.gdbtk is added to subdirs, however it doesn't
exist. gdb/testsuite/gdb.gdbtk was removed by the patch below,
[rfa] git repo fixup: delete gdb/testsuite/gdb.gdbtk
http://thread.gmane.org/gmane.comp.gdb.patches/61489
and we should cleanup configure.ac accordingly.
gdb/testsuite:
2014-12-01 Yao Qi <yao@codesourcery.com>
* configure.ac: Remove AC_ARG_ENABLE for gdbtk. Don't invoke
AC_CONFIG_SUBDIRS(gdb.gdbtk).
* configure: Re-generated.
gdb/ChangeLog:
* eval.c: Include gdbthread.h.
(evaluate_subexp): Enable thread stack temporaries before
evaluating a complete expression and clean them up after the
evaluation is complete.
* gdbthread.h: Include common/vec.h.
(value_ptr): New typedef.
(VEC (value_ptr)): New vector type.
(value_vec): New typedef.
(struct thread_info): Add new fields stack_temporaries_enabled
and stack_temporaries.
(enable_thread_stack_temporaries)
(thread_stack_temporaries_enabled_p, push_thread_stack_temporary)
(get_last_thread_stack_temporary)
(value_in_thread_stack_temporaries): Declare.
* gdbtypes.c (class_or_union_p): New function.
* gdbtypes.h (class_or_union_p): Declare.
* infcall.c (call_function_by_hand): Store return values of class
type as temporaries on stack.
* thread.c (enable_thread_stack_temporaries): New function.
(thread_stack_temporaries_enabled_p, push_thread_stack_temporary)
(get_last_thread_stack_temporary): Likewise.
(value_in_thread_stack_temporaries): Likewise.
* value.c (value_force_lval): New function.
* value.h (value_force_lval): Declare.
gdb/testsuite/ChangeLog:
* gdb.cp/chained-calls.cc: New file.
* gdb.cp/chained-calls.exp: New file.
* gdb.cp/smartp.exp: Remove KFAIL for "p c2->inta".
Python 3's print requires to use parentheses, so this patch adds them
where they were missing.
gdb/testsuite/ChangeLog:
* gdb.ada/py_range.exp: Add parentheses to calls to print.
* gdb.dwarf2/symtab-producer.exp: Same.
* gdb.gdb/python-interrupts.exp: Same.
* gdb.gdb/python-selftest.exp: Same.
* gdb.python/py-linetable.exp: Same.
* gdb.python/py-type.exp: Same.
* gdb.python/py-value-cc.exp: Same.
* gdb.python/py-value.exp: Same.
We enable systemtap probe in glibc recently, and see the following gdb fail,
(gdb) set solib-absolute-prefix /.
...
Stopped due to shared library event:^M
Inferior loaded /./foo/bar/gdb.base/break-probes-solib.so
...
(gdb) FAIL: gdb.base/break-probes.exp: run til our library loads (the program exited)
$binfile_lib is /foo/bar/gdb.base/break-probes-solib.so, but the
sysroot is prefixed in solib.c:solib_find, as comments described:
Global variable GDB_SYSROOT is used as a prefix directory
to search for shared libraries if they have an absolute path.
so the output becomes "/./foo/bar/gdb.base/break-probes-solib.so", which
is still correct. However, the test repeatedly continue the program
and tries to match $binfile_lib, finally, the program exits and the
test fails.
This patch is to adjust the pattern to match $sysroot$binfile_lib
instead of $binfile_lib.
gdb/testsuite:
2014-11-28 Yao Qi <yao@codesourcery.com>
* gdb.base/break-probes.exp: Match library name prefixed with
sysroot.
The following test is found in python/py-linetable.exp:
gdb_test "python print sorted(fset)" \
"\[20L, 21L, 22L, 24L, 25L, 28L, 29L, 30L, 32L, 33L, 37L, 39L, 40L, 42L, 44L, 45L, 46L\].*" \
"Test frozen set contains line numbers"
I noticed that it passed when using Python 3, even though it should fail
because of the missing parentheses for the call print.
There needs to be more escaping of the square brackets. Currently, it is
interpreted as "any one character from this big list of characters,
followed by .*". When adding the required amount of backslashes, the
test starts failing as it should.
Moreover, both in Python 2.7 and Python 3.3 the numbers don't have the L
suffix, so now the test fails because of that. Anybody knows why they
were there in the first place? I just tested with Python 2.4 and there
are no Ls.
gdb/testsuite/ChangeLog:
* gdb.python/py-linetable.exp: Escape properly sorted(fset)
test expected output. Add parentheses for the call to print.
Remove L suffix from integers.
Signed-off-by: Simon Marchi <simon.marchi@ericsson.com>
MACRO_AT_func can be used in gdb.trace/entry-values.exp to correctly
get function's address in generated debug info. As a result, the test
is more friendly to clang. Currently, there are some fails in
entry-values.exp when the test is compiled by clang. With this patch
applied, all fails go away.
gdb/testsuite:
2014-11-22 Yao Qi <yao@codesourcery.com>
* gdb.trace/entry-values.c: Remove asms.
(foo): Add foo_label.
(bar): Add bar_label.
* gdb.trace/entry-values.exp: Remove code computing foo's
length and bar's length.
(Dwarf::assemble): Invoke function_range for bar and use
MACRO_AT_func for foo.
This patch fixes two fails in dw2-compdir-oldgcc.exp I've seen on arm
target thumb mode.
FAIL: gdb.dwarf2/dw2-compdir-oldgcc.exp: info source gcc42
FAIL: gdb.dwarf2/dw2-compdir-oldgcc.exp: info source gcc43
When fill in DW_AT_low_pc, the label should be used rather than the
function, otherwise, the LSB bit of the address in DW_AT_low_pc is
set and the debug info is wrong. This patch is to add two labels for
functions gcc42 and gcc43 respectively, and use them. These two
fails are fixed.
gdb/testsuite:
2014-11-22 Yao Qi <yao@codesourcery.com>
* gdb.dwarf2/dw2-compdir-oldgcc.S: Define label .Lgcc42_procstart
and .Lgcc43_procstart. Use .Lgcc42_procstart instead of gcc42.
Use .Lgcc43_procstart instead of gcc43.
Consider the following variable declaration:
type Array_Type is array (Integer range <>) of Integer;
Var: Array_Type (0 .. -1);
"ptype var" prints the wrong upper bound for that array:
(gdb) ptype var
type = array (0 .. 4294967295) of integer
The debugging info for the type of variable "Var" is as follow:
<2><cf>: Abbrev Number: 13 (DW_TAG_structure_type)
<d0> DW_AT_name : foo__var___PAD
<3><db>: Abbrev Number: 14 (DW_TAG_member)
<dc> DW_AT_name : F
<e0> DW_AT_type : <0xa5>
This is just an artifact from code generation, which is just
a wrapper that we should ignore. The real type is the type of
field "F" in that PAD type, which is described as:
<2><a5>: Abbrev Number: 10 (DW_TAG_array_type)
<a6> DW_AT_name : foo__TvarS
<3><b6>: Abbrev Number: 11 (DW_TAG_subrange_type)
<b7> DW_AT_type : <0xc1>
<bb> DW_AT_lower_bound : 0
<bc> DW_AT_upper_bound : 0xffffffff
Trouble occurs because DW_AT_upper_bound is encoded using
a DW_FORM_data4, which is ambiguous regarding signedness.
In that case, dwarf2read.c::dwarf2_get_attr_constant_value
reads the value as unsigned, which is not what we want
in this case.
As it happens, we already have code dealing with this situation
in dwarf2read.c::read_subrange_type which checks whether
the subrange's type is signed or not, and if it is, fixes
the bound's value by sign-extending it:
if (high.kind == PROP_CONST
&& !TYPE_UNSIGNED (base_type) && (high.data.const_val & negative_mask))
high.data.const_val |= negative_mask;
Unfortunately, what happens in our case is that the base type
of the array's subrange type is marked as being unsigned, and
so we never get to apply the sign extension. Following the DWARF
trail, the range's base type is described as another subrange type...
<2><c1>: Abbrev Number: 12 (DW_TAG_subrange_type)
<c7> DW_AT_name : foo__TTvarSP1___XDLU_0__1m
<cb> DW_AT_type : <0x2d>
... whose base type is, (finally), a basic type (signed):
<1><2d>: Abbrev Number: 2 (DW_TAG_base_type)
<2e> DW_AT_byte_size : 4
<2f> DW_AT_encoding : 5 (signed)
<30> DW_AT_name : integer
The reason why GDB thinks that foo__TTvarSP1___XDLU_0__1m
(the base type of the array's range type) is an unsigned type
is found in gdbtypes.c::create_range_type. We consider that
a range type is unsigned iff its lower bound is >= 0:
if (low_bound->kind == PROP_CONST && low_bound->data.const_val >= 0)
TYPE_UNSIGNED (result_type) = 1;
That is normally sufficient, as one would expect the upper bound to
always be greater or equal to the lower bound. But Ada actually
allows the declaration of empty range types where the upper bound
is less than the lower bound. In this case, the upper bound is
negative, so we should not be marking the type as unsigned.
This patch fixes the issue by simply checking the upper bound as well
as the lower bound, and clears the range type's unsigned flag when
it is found to be constant and negative.
gdb/ChangeLog:
* gdbtypes.c (create_range_type): Unset RESULT_TYPE's
flag_unsigned if HIGH_BOUND is constant and negative.
gdb/testsuite/ChangeLog:
* gdb.ada/n_arr_bound: New testcase.
Tested on x86_64-linux.
This patch intends to partially fix PR breakpoints/10737, which is
about making the syscall information (for the "catch syscall" command)
be per-arch, instead of global. This is not a full fix because of the
other issues pointed by Pedro here:
<https://sourceware.org/bugzilla/show_bug.cgi?id=10737#c5>
However, I consider it a good step towards the real fix. It will also
help me fix <https://sourceware.org/bugzilla/show_bug.cgi?id=17402>.
What this patch does, basically, is move the "syscalls_info"
struct to gdbarch. Currently, the syscall information is stored in a
global variable inside gdb/xml-syscall.c, which means that there is no
easy way to correlate this info with the current target or
architecture being used, for example. This causes strange behaviors,
because the syscall info is not re-read when the arch changes. For
example, if you put a syscall catchpoint in syscall 5 on i386 (syscall
open), and then load a x86_64 program on GDB and put the same syscall
5 there (fstat on x86_64), you will still see that GDB tells you that
it is catching "open", even though it is not. With this patch, GDB
correctly says that it will be catching fstat syscalls.
(gdb) set architecture i386
The target architecture is assumed to be i386
(gdb) catch syscall 5
Catchpoint 1 (syscall 'open' [5])
(gdb) set architecture i386:x86-64
The target architecture is assumed to be i386:x86-64
(gdb) catch syscall 5
Catchpoint 2 (syscall 'open' [5])
But with the patch:
(gdb) set architecture i386
The target architecture is assumed to be i386
(gdb) catch syscall 5
Catchpoint 1 (syscall 'open' [5])
(gdb) set architecture i386:x86-64
The target architecture is assumed to be i386:x86-64
(gdb) catch syscall 5
Catchpoint 2 (syscall 'fstat' [5])
As I said, there are still some problems on the "catch syscall"
mechanism, because (for example) the user should be able to "catch
syscall open" on i386, and then expect "open" to be caught also on
x86_64. Currently, it doesn't work. I intend to work on this later.
gdb/
2014-11-20 Sergio Durigan Junior <sergiodj@redhat.com>
PR breakpoints/10737
* amd64-linux-tdep.c (amd64_linux_init_abi_common): Adjust call to
set_xml_syscall_file_name to provide gdbarch.
* arm-linux-tdep.c (arm_linux_init_abi): Likewise.
* bfin-linux-tdep.c (bfin_linux_init_abi): Likewise.
* breakpoint.c (print_it_catch_syscall): Adjust call to
get_syscall_by_number to provide gdbarch.
(print_one_catch_syscall): Likewise.
(print_mention_catch_syscall): Likewise.
(print_recreate_catch_syscall): Likewise.
(catch_syscall_split_args): Adjust calls to get_syscall_by_number
and get_syscall_by_name to provide gdbarch.
(catch_syscall_completer): Adjust call to get_syscall_names to
provide gdbarch.
* gdbarch.c: Regenerate.
* gdbarch.h: Likewise.
* gdbarch.sh: Forward declare "struct syscalls_info".
(xml_syscall_file): New variable.
(syscalls_info): Likewise.
* i386-linux-tdep.c (i386_linux_init_abi): Adjust call to
set_xml_syscall_file_name to provide gdbarch.
* mips-linux-tdep.c (mips_linux_init_abi): Likewise.
* ppc-linux-tdep.c (ppc_linux_init_abi): Likewise.
* s390-linux-tdep.c (s390_gdbarch_init): Likewise.
* sparc-linux-tdep.c (sparc32_linux_init_abi): Likewise.
* sparc64-linux-tdep.c (sparc64_linux_init_abi): Likewise.
* xml-syscall.c: Include gdbarch.h.
(set_xml_syscall_file_name): Accept gdbarch parameter.
(get_syscall_by_number): Likewise.
(get_syscall_by_name): Likewise.
(get_syscall_names): Likewise.
(my_gdb_datadir): Delete global variable.
(struct syscalls_info) <my_gdb_datadir>: New variable.
(struct syscalls_info) <sysinfo>: Rename variable to
"syscalls_info".
(sysinfo): Delete global variable.
(have_initialized_sysinfo): Likewise.
(xml_syscall_file): Likewise.
(sysinfo_free_syscalls_desc): Rename to...
(syscalls_info_free_syscalls_desc): ... this.
(free_syscalls_info): Rename "sysinfo" to "syscalls_info". Adjust
code to the new layout of "struct syscalls_info".
(make_cleanup_free_syscalls_info): Rename parameter "sysinfo" to
"syscalls_info".
(syscall_create_syscall_desc): Likewise.
(syscall_start_syscall): Likewise.
(syscall_parse_xml): Likewise.
(xml_init_syscalls_info): Likewise. Drop "const" from return value.
(init_sysinfo): Rename to...
(init_syscalls_info): ...this. Add gdbarch as a parameter.
Adjust function to deal with gdbarch.
(xml_get_syscall_number): Delete parameter sysinfo. Accept
gdbarch as a parameter. Adjust code.
(xml_get_syscall_name): Likewise.
(xml_list_of_syscalls): Likewise.
(set_xml_syscall_file_name): Accept gdbarch as parameter.
(get_syscall_by_number): Likewise.
(get_syscall_by_name): Likewise.
(get_syscall_names): Likewise.
* xml-syscall.h (set_xml_syscall_file_name): Likewise.
(get_syscall_by_number): Likewise.
(get_syscall_by_name): Likewise.
(get_syscall_names): Likewise.
gdb/testsuite/
2014-11-20 Sergio Durigan Junior <sergiodj@redhat.com>
PR breakpoints/10737
* gdb.base/catch-syscall.exp (do_syscall_tests): Call
test_catch_syscall_multi_arch.
(test_catch_syscall_multi_arch): New function.
Currently "symtabs" in gdb are stored as a single linked list of
struct symtab that contains both symbol symtabs (the blockvectors)
and file symtabs (the linetables).
This has led to confusion, bugs, and performance issues.
This patch is conceptually very simple: split struct symtab into
two pieces: one part containing things common across the entire
compilation unit, and one part containing things specific to each
source file.
Example.
For the case of a program built out of these files:
foo.c
foo1.h
foo2.h
bar.c
foo1.h
bar.h
Today we have a single list of struct symtabs:
objfile -> foo.c -> foo1.h -> foo2.h -> bar.c -> foo1.h -> bar.h -> NULL
where "->" means the "next" pointer in struct symtab.
With this patch, that turns into:
objfile -> foo.c(cu) -> bar.c(cu) -> NULL
| |
v v
foo.c bar.c
| |
v v
foo1.h foo1.h
| |
v v
foo2.h bar.h
| |
v v
NULL NULL
where "foo.c(cu)" and "bar.c(cu)" are struct compunit_symtab objects,
and the files foo.c, etc. are struct symtab objects.
So now, for example, when we want to iterate over all blockvectors
we can now just iterate over the compunit_symtab list.
Plus a lot of the data that was either unused or replicated for each
symtab in a compilation unit now lives in struct compunit_symtab.
E.g., the objfile pointer, the producer string, etc.
I thought of moving "language" out of struct symtab but there is
logic to try to compute the language based on previously seen files,
and I think that's best left as is for now.
With my standard monster benchmark with -readnow (which I can't actually
do, but based on my calculations), whereas today the list requires
77MB to store all the struct symtabs, it now only requires 37MB.
A modest space savings given the gigabytes needed for all the debug info,
etc. Still, it's nice. Plus, whereas today we create a copy of dirname
for each source file symtab in a compilation unit, we now only create one
for the compunit.
So this patch is basically just a data structure reorg,
I don't expect significant performance improvements from it.
Notes:
1) A followup patch can do a similar split for struct partial_symtab.
I have left that until after I get the changes I want in to
better utilize .gdb_index (it may affect how we do partial syms).
2) Another followup patch *could* rename struct symtab.
The term "symtab" is ambiguous and has been a source of confusion.
In this patch I'm leaving it alone, calling it the "historical" name
of "filetabs", which is what they are now: just the file-name + line-table.
gdb/ChangeLog:
Split struct symtab into two: struct symtab and compunit_symtab.
* amd64-tdep.c (amd64_skip_xmm_prologue): Fetch producer from compunit.
* block.c (blockvector_for_pc_sect): Change "struct symtab *" argument
to "struct compunit_symtab *". All callers updated.
(set_block_compunit_symtab): Renamed from set_block_symtab. Change
"struct symtab *" argument to "struct compunit_symtab *".
All callers updated.
(get_block_compunit_symtab): Renamed from get_block_symtab. Change
result to "struct compunit_symtab *". All callers updated.
(find_iterator_compunit_symtab): Renamed from find_iterator_symtab.
Change result to "struct compunit_symtab *". All callers updated.
* block.h (struct global_block) <compunit_symtab>: Renamed from symtab.
hange type to "struct compunit_symtab *". All uses updated.
(struct block_iterator) <d.compunit_symtab>: Renamed from "d.symtab".
Change type to "struct compunit_symtab *". All uses updated.
* buildsym.c (struct buildsym_compunit): New struct.
(subfiles, buildsym_compdir, buildsym_objfile, main_subfile): Delete.
(buildsym_compunit): New static global.
(finish_block_internal): Update to fetch objfile from
buildsym_compunit.
(make_blockvector): Delete objfile argument.
(start_subfile): Rewrite to use buildsym_compunit. Don't initialize
debugformat, producer.
(start_buildsym_compunit): New function.
(free_buildsym_compunit): Renamed from free_subfiles_list.
All callers updated.
(patch_subfile_names): Rewrite to use buildsym_compunit.
(get_compunit_symtab): New function.
(get_macro_table): Delete argument comp_dir. All callers updated.
(start_symtab): Change result to "struct compunit_symtab *".
All callers updated. Create the subfile of the main source file.
(watch_main_source_file_lossage): Rewrite to use buildsym_compunit.
(reset_symtab_globals): Update.
(end_symtab_get_static_block): Update to use buildsym_compunit.
(end_symtab_without_blockvector): Rewrite.
(end_symtab_with_blockvector): Change result to
"struct compunit_symtab *". All callers updated.
Update to use buildsym_compunit. Don't set symtab->dirname,
instead set it in the compunit.
Explicitly make sure main symtab is first in its list.
Set debugformat, producer, blockvector, block_line_section, and
macrotable in the compunit.
(end_symtab_from_static_block): Change result to
"struct compunit_symtab *". All callers updated.
(end_symtab, end_expandable_symtab): Ditto.
(set_missing_symtab): Change symtab argument to
"struct compunit_symtab *". All callers updated.
(augment_type_symtab): Ditto.
(record_debugformat): Update to use buildsym_compunit.
(record_producer): Update to use buildsym_compunit.
* buildsym.h (struct subfile) <dirname>: Delete.
<producer, debugformat>: Delete.
<buildsym_compunit>: New member.
(get_compunit_symtab): Declare.
* dwarf2read.c (struct type_unit_group) <compunit_symtab>: Renamed
from primary_symtab. Change type to "struct compunit_symtab *".
All uses updated.
(dwarf2_start_symtab): Change result to "struct compunit_symtab *".
All callers updated.
(dwarf_decode_macros): Delete comp_dir argument. All callers updated.
(struct dwarf2_per_cu_quick_data) <compunit_symtab>: Renamed from
symtab. Change type to "struct compunit_symtab *". All uses updated.
(dw2_instantiate_symtab): Change result to "struct compunit_symtab *".
All callers updated.
(dw2_find_last_source_symtab): Ditto.
(dw2_lookup_symbol): Ditto.
(recursively_find_pc_sect_compunit_symtab): Renamed from
recursively_find_pc_sect_symtab. Change result to
"struct compunit_symtab *". All callers updated.
(dw2_find_pc_sect_compunit_symtab): Renamed from
dw2_find_pc_sect_symtab. Change result to
"struct compunit_symtab *". All callers updated.
(get_compunit_symtab): Renamed from get_symtab. Change result to
"struct compunit_symtab *". All callers updated.
(recursively_compute_inclusions): Change type of immediate_parent
argument to "struct compunit_symtab *". All callers updated.
(compute_compunit_symtab_includes): Renamed from
compute_symtab_includes. All callers updated. Rewrite to compute
includes of compunit_symtabs and not symtabs.
(process_full_comp_unit): Update to work with struct compunit_symtab.
(process_full_type_unit): Ditto.
(dwarf_decode_lines_1): Delete argument comp_dir. All callers updated.
(dwarf_decode_lines): Remove special case handling of main subfile.
(macro_start_file): Delete argument comp_dir. All callers updated.
(dwarf_decode_macro_bytes): Ditto.
* guile/scm-block.c (bkscm_print_block_syms_progress_smob): Update to
use struct compunit_symtab.
* i386-tdep.c (i386_skip_prologue): Fetch producer from compunit.
* jit.c (finalize_symtab): Build compunit_symtab.
* jv-lang.c (get_java_class_symtab): Change result to
"struct compunit_symtab *". All callers updated.
* macroscope.c (sal_macro_scope): Fetch macro table from compunit.
* macrotab.c (struct macro_table) <compunit_symtab>: Renamed from
comp_dir. Change type to "struct compunit_symtab *".
All uses updated.
(new_macro_table): Change comp_dir argument to cust,
"struct compunit_symtab *". All callers updated.
* maint.c (struct cmd_stats) <nr_compunit_symtabs>: Renamed from
nr_primary_symtabs. All uses updated.
(count_symtabs_and_blocks): Update to handle compunits.
(report_command_stats): Update output, "primary symtabs" renamed to
"compunits".
* mdebugread.c (new_symtab): Change result to
"struct compunit_symtab *". All callers updated.
(parse_procedure): Change type of search_symtab argument to
"struct compunit_symtab *". All callers updated.
* objfiles.c (objfile_relocate1): Loop over blockvectors in a
separate loop.
* objfiles.h (struct objfile) <compunit_symtabs>: Renamed from
symtabs. Change type to "struct compunit_symtab *". All uses updated.
(ALL_OBJFILE_FILETABS): Renamed from ALL_OBJFILE_SYMTABS.
All uses updated.
(ALL_OBJFILE_COMPUNITS): Renamed from ALL_OBJFILE_PRIMARY_SYMTABS.
All uses updated.
(ALL_FILETABS): Renamed from ALL_SYMTABS. All uses updated.
(ALL_COMPUNITS): Renamed from ALL_PRIMARY_SYMTABS. All uses updated.
* psympriv.h (struct partial_symtab) <compunit_symtab>: Renamed from
symtab. Change type to "struct compunit_symtab *". All uses updated.
* psymtab.c (psymtab_to_symtab): Change result type to
"struct compunit_symtab *". All callers updated.
(find_pc_sect_compunit_symtab_from_partial): Renamed from
find_pc_sect_symtab_from_partial. Change result type to
"struct compunit_symtab *". All callers updated.
(lookup_symbol_aux_psymtabs): Change result type to
"struct compunit_symtab *". All callers updated.
(find_last_source_symtab_from_partial): Ditto.
* python/py-symtab.c (stpy_get_producer): Fetch producer from compunit.
* source.c (forget_cached_source_info_for_objfile): Fetch debugformat
and macro_table from compunit.
* symfile-debug.c (debug_qf_find_last_source_symtab): Change result
type to "struct compunit_symtab *". All callers updated.
(debug_qf_lookup_symbol): Ditto.
(debug_qf_find_pc_sect_compunit_symtab): Renamed from
debug_qf_find_pc_sect_symtab, change result type to
"struct compunit_symtab *". All callers updated.
* symfile.c (allocate_symtab): Delete objfile argument.
New argument cust.
(allocate_compunit_symtab): New function.
(add_compunit_symtab_to_objfile): New function.
* symfile.h (struct quick_symbol_functions) <lookup_symbol>:
Change result type to "struct compunit_symtab *". All uses updated.
<find_pc_sect_compunit_symtab>: Renamed from find_pc_sect_symtab.
Change result type to "struct compunit_symtab *". All uses updated.
* symmisc.c (print_objfile_statistics): Compute blockvector count in
separate loop.
(dump_symtab_1): Update test for primary source symtab.
(maintenance_info_symtabs): Update to handle compunit symtabs.
(maintenance_check_symtabs): Ditto.
* symtab.c (set_primary_symtab): Delete.
(compunit_primary_filetab): New function.
(compunit_language): New function.
(iterate_over_some_symtabs): Change type of arguments "first",
"after_last" to "struct compunit_symtab *". All callers updated.
Update to loop over symtabs in each compunit.
(error_in_psymtab_expansion): Rename symtab argument to cust,
and change type to "struct compunit_symtab *". All callers updated.
(find_pc_sect_compunit_symtab): Renamed from find_pc_sect_symtab.
Change result type to "struct compunit_symtab *". All callers updated.
(find_pc_compunit_symtab): Renamed from find_pc_symtab.
Change result type to "struct compunit_symtab *". All callers updated.
(find_pc_sect_line): Only loop over symtabs within selected compunit
instead of all symtabs in the objfile.
* symtab.h (struct symtab) <blockvector>: Moved to compunit_symtab.
<compunit_symtab> New member.
<block_line_section>: Moved to compunit_symtab.
<locations_valid>: Ditto.
<epilogue_unwind_valid>: Ditto.
<macro_table>: Ditto.
<dirname>: Ditto.
<debugformat>: Ditto.
<producer>: Ditto.
<objfile>: Ditto.
<call_site_htab>: Ditto.
<includes>: Ditto.
<user>: Ditto.
<primary>: Delete
(SYMTAB_COMPUNIT): New macro.
(SYMTAB_BLOCKVECTOR): Update definition.
(SYMTAB_OBJFILE): Update definition.
(SYMTAB_DIRNAME): Update definition.
(struct compunit_symtab): New type. Common members among all source
symtabs within a compilation unit moved here. All uses updated.
(COMPUNIT_OBJFILE): New macro.
(COMPUNIT_FILETABS): New macro.
(COMPUNIT_DEBUGFORMAT): New macro.
(COMPUNIT_PRODUCER): New macro.
(COMPUNIT_DIRNAME): New macro.
(COMPUNIT_BLOCKVECTOR): New macro.
(COMPUNIT_BLOCK_LINE_SECTION): New macro.
(COMPUNIT_LOCATIONS_VALID): New macro.
(COMPUNIT_EPILOGUE_UNWIND_VALID): New macro.
(COMPUNIT_CALL_SITE_HTAB): New macro.
(COMPUNIT_MACRO_TABLE): New macro.
(ALL_COMPUNIT_FILETABS): New macro.
(compunit_symtab_ptr): New typedef.
(DEF_VEC_P (compunit_symtab_ptr)): New vector type.
gdb/testsuite/ChangeLog:
* gdb.base/maint.exp: Update expected output.
The bp-permanent test case assumes that a NOP is exactly as long as a
software breakpoint. This is not the case for the S390 "nop"
instruction, which is 4 bytes long, while a software breakpoint is
just 2 bytes long. The "nopr" instruction has the right size and can
be used instead.
Without this patch the test case fails on S390 when trying to continue
after SIGTRAP on the permanent breakpoint:
...
Continuing.
Program received signal SIGILL, Illegal instruction.
test () at /home/arnez/src/binutils-gdb/gdb/testsuite/gdb.base/bp-permanent.c:40
40 NOP; /* after permanent bp */
(gdb)
FAIL: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=0:
basics: stop at permanent breakpoint
With this patch the test case succeeds without any FAILs.
gdb/testsuite/ChangeLog:
* gdb.base/bp-permanent.c (NOP): Define as 2-byte instead of
4-byte instruction on S390.
Consider the following code which declares a variable A2 which
is an array of arrays of integers.
type Array2_First is array (24 .. 26) of Integer;
type Array2_Second is array (1 .. 2) of Array2_First;
A1 : Array1_Second := ((10, 11, 12), (13, 14, 15));
Trying to print the type of that variable currently yields:
(gdb) ptype A2
type = array (1 .. 2, 24 .. 26) of integer
This is not correct, as this is the description of a two-dimension
array, which is different from an array of arrays. The expected
output is:
(gdb) ptype a2
type = array (1 .. 2) of foo_n926_029.array2_first
GDB's struct type currently handles multi-dimension arrays the same
way arrays of arrays, where each dimension is stored as a sub-array.
The ada-valprint module considers that consecutive array layers
are in fact multi-dimension arrays. For array of arrays, a typedef
layer is introduced between the two arrays, creating a break between
each array type.
In our situation, A2 is a described as a typedef of an array type...
.uleb128 0x8 # (DIE (0x125) DW_TAG_variable)
.ascii "a2\0" # DW_AT_name
.long 0xfc # DW_AT_type
.uleb128 0x4 # (DIE (0xfc) DW_TAG_typedef)
.long .LASF5 # DW_AT_name: "foo__array2_second"
.long 0x107 # DW_AT_type
.uleb128 0x5 # (DIE (0x107) DW_TAG_array_type)
.long .LASF5 # DW_AT_name: "foo__array2_second"
.long 0xb4 # DW_AT_type
.uleb128 0x6 # (DIE (0x114) DW_TAG_subrange_type)
.long 0x11b # DW_AT_type
.byte 0x2 # DW_AT_upper_bound
.byte 0 # end of children of DIE 0x107
... whose element type is, as expected, a typedef to the sub-array
type:
.uleb128 0x4 # (DIE (0xb4) DW_TAG_typedef)
.long .LASF4 # DW_AT_name: "foo__array2_first"
.long 0xbf # DW_AT_type
.uleb128 0x9 # (DIE (0xbf) DW_TAG_array_type)
.long .LASF4 # DW_AT_name: "foo__array2_first"
.long 0xd8 # DW_AT_GNAT_descriptive_type
.long 0x1c5 # DW_AT_type
.uleb128 0xa # (DIE (0xd0) DW_TAG_subrange_type)
.long 0xf0 # DW_AT_type
.byte 0x18 # DW_AT_lower_bound
.byte 0x1a # DW_AT_upper_bound
.byte 0 # end of children of DIE 0xbf
The reason why things fails is that, during expression evaluation,
GDB tries to "fix" A1's type. Because the sub-array has a parallel
(descriptive) type (DIE 0xd8), GDB thinks that our array's index
type must be dynamic and therefore needs to be fixed. This in turn
causes the sub-array to be "fixed", which itself results in the
typedef layer to be stripped.
However, looking closer at the parallel type, we see...
.uleb128 0xb # (DIE (0xd8) DW_TAG_structure_type)
.long .LASF8 # DW_AT_name: "foo__array2_first___XA"
[...]
.uleb128 0xc # (DIE (0xe4) DW_TAG_member)
.long .LASF10 # DW_AT_name: "foo__Tarray2_firstD1___XDLU_24__26"
... that all it tells us is that the array bounds are 24 and 26,
which is already correctly provided by the array's DW_TAG_subrange_type
bounds, meaning that this parallel type is just redundant.
Parallel types in general are slowly being removed in favor of
standard DWARF constructs. But in the meantime, this patch kills
two birds with one stone:
1. It recognizes this situation where the XA type is useless,
and saves an unnecessary range-type fixing;
2. It fixes the issue at hand because ignoring the XA type results
in no type fixing being required, which allows the typedef layer
to be preserved.
gdb/ChangeLog:
* ada-lang.c (ada_is_redundant_range_encoding): New function.
(ada_is_redundant_index_type_desc): New function.
(to_fixed_array_type): Ignore parallel XA type if redundant.
gdb/testsuite/ChangeLog:
* gdb.ada/arr_arr: New testcase.
Tested on x86_64-linux.
... when that packed array is part of a discriminated record and
one of the bounds is a discriminant.
Consider the following code:
type FUNNY_CHAR_T is (NUL, ' ', '"', '#', [etc]);
type FUNNY_STR_T is array (POSITIVE range <>) of FUNNY_CHAR_T;
pragma PACK (FUNNY_STR_T);
type FUNNY_STRING_T (SIZE : NATURAL := 1) is
record
STR : FUNNY_STR_T (1 .. SIZE) := (others => '0');
LENGTH : NATURAL := 4;
end record;
TEST: FUNNY_STRING_T(100);
GDB is able to print the value of variable "test" and "test.str".
But not "test.str(1)":
(gdb) p test
$1 = (size => 100, str => (33 'A', nul <repeats 99 times>), length => 1)
(gdb) p test.str
$2 = (33 'A', nul <repeats 99 times>)
(gdb) p test.str(1)
object size is larger than varsize-limit
The problem occurs during the phase where we are trying to resolve
the expression subscript operation. On the one hand of the subscript
operator, we have the result of the evaluation of "test.str", which
is our packed array. We have the following code to handle packed
arrays in particular:
if (ada_is_constrained_packed_array_type
(desc_base_type (value_type (argvec[0]))))
argvec[0] = ada_coerce_to_simple_array (argvec[0]);
This eventually leads to a call to constrained_packed_array_type
to return the "simple array". This function relies on a parallel
___XA type, when available, to determine the bounds. In our case,
we find type...
failure__funny_string_t__T4b___XA"
... which has one field describing the bounds of our array as:
failure__funny_string_t__T3b___XDLU_1__size
The part that interests us is after the ___XD suffix or,
in other words: "LU_1__size". What this means in GNAT encoding
parlance is that the lower bound is 1, and that the upper bound
is the value of "size". "size" is our discriminant in this case.
Normally, we would access the record's discriminant in order to
get the upper bound's value, but we do not have that information,
here. We are in a mode where we are just trying to "fix" the type
without an actual value. This is what the call to to_fixed_range_type
is doing, and because the fix'ing fails, it ends up returning
the ___XDLU type unmodified as our index type.
This shouldn't be a problem, except that the later part of
constrained_packed_array_type then uses that index_type to
determine the array size, via a call to get_discrete_bounds.
The problem is that the upper bound of the ___XDLU type is
dynamic (in the DWARF sense) while get_discrete_bounds implicitly
assumes that the bounds are static, and therefore accesses
them using macros that assume the bounds values are constants:
case TYPE_CODE_RANGE:
*lowp = TYPE_LOW_BOUND (type);
*highp = TYPE_HIGH_BOUND (type);
This therefore returns a bogus value for the upper bound,
leading to an unexpectedly large size for our array, which
later triggers the varsize-limit guard we've seen above.
This patch avoids the problem by adding special handling
of dynamic range types. It also extends the documentation
of the constrained_packed_array_type function to document
what happens in this situation.
gdb/ChangeLog:
* ada-lang.c (constrained_packed_array_type): Set the length
of the return array as if both bounds where zero if that
returned array's index type is dynamic.
gdb/testsuite/ChangeLog:
* gdb.ada/pkd_arr_elem: New Testcase.
Tested on x86_64-linux.
tests.
FAIL: gdb.reverse/consecutive-precsave.exp: reload precord save file
FAIL: gdb.reverse/finish-precsave.exp: reload precord save file
FAIL: gdb.reverse/until-precsave.exp: reload core file
FAIL: gdb.reverse/watch-precsave.exp: reload core file
FAIL: gdb.reverse/step-precsave.exp: reload core file
FAIL: gdb.reverse/break-precsave.exp: reload precord save file
FAIL: gdb.reverse/sigall-precsave.exp: reload precord save file
They happen for two reasons.
- mingw32 does not define SIGTRAP, so upon recording a core file, the
signal information will be missing, which in turn causes GDB to not
display the stopping signal when it loads the same core file. An
earlier message warns about this:
"warning: Signal SIGTRAP does not exist on this system."
- The testcase is crafted in a way that expects a pattern of the
stopping signal message instead of a successful core file read message.
The following patch fixes this by changing the old pattern to a more
reasonable one, while still ignoring the fact that mingw32-based GDB
does not record a SIGTRAP in a core file because it does not define
it.
gdb/testsuite/
2014-11-18 Luis Machado <lgustavo@codesourcery.com>
* gdb.reverse/break-precsave: Expect completion message for
core file reads.
* gdb.reverse/consecutive-precsave.exp: Likewise.
* gdb.reverse/finish-precsave.exp: Likewise.
* gdb.reverse/i386-precsave.exp: Likewise.
* gdb.reverse/machinestate-precsave.exp: Likewise.
* gdb.reverse/sigall-precsave.exp: Likewise.
* gdb.reverse/solib-precsave.exp: Likewise.
* gdb.reverse/step-precsave.exp: Likewise.
* gdb.reverse/until-precsave.exp: Likewise.
* gdb.reverse/watch-precsave.exp: Likewise.
Fix some more C compiler warnings for missing function return types
and implicit function declarations in the GDB testsuite.
gdb/testsuite/ChangeLog:
* gdb.base/bp-permanent.c: Include unistd.h.
* gdb.python/py-framefilter-mi.c (main): Add return type.
* gdb.python/py-framefilter.c (main): Likewise.
* gdb.trace/actions-changed.c (main): Likewise.
Remove literal line numbers from the regexps in mi-until.exp. Add
appropriate eye-catchers to until.c and refer to those instead.
This change fixes the test case after having disturbed the line
numbering with the previous fix for compiler warnings with -std=gnu11.
gdb/testsuite/ChangeLog:
* gdb.mi/until.c: Add eye-catchers.
* gdb.mi/mi-until.exp: Refer to eye-catchers instead of literal
line numbers.
In some .exp files it was missed to remove the references to
eye-catchers like "set breakpoint 9 here" when the non-prototype
function header variants they belonged to were deleted. This patch
cleans this up.
gdb/testsuite/ChangeLog:
* gdb.base/condbreak.exp: Drop references to removed non-prototype
function header variants in break1.c.
* gdb.base/ena-dis-br.exp: Likewise.
* gdb.base/hbreak2.exp: Likewise.
* gdb.reverse/until-precsave.exp: Drop references to removed
non-prototype function header variants in ur1.c.
* gdb.reverse/until-reverse.exp: Likewise.
Dwarf::tu and Dwarf::cu allow selection of units with 64-bit offsets
through an option. When selected, unit size is encoded properly, but
offset to abbreviation unit is still encoded in a 4-byte field. This
patch fixes the problem.
Reproducer:
Dwarf::assemble "blah.s" {
tu {is_64 1 version 4 addr_size 8} 0x1122334455667788 the_type {
type_unit {} { the_type: }
}
cu {is_64 1 version 4 addr_size 8} {
compile_unit {{language @DW_LANG_C}} {}
}
}
gdb/testsuite:
* lib/dwarf.exp (Dwarf::cu, Dwarf::tu): Emit
${_cu_offset_size} bytes abbrev offset.
Basically the problem is that "symtab" is ambiguous.
Is it the primary symtab (where we canonically think of
blockvectors as being stored) or is it for a specific file
(where each file's line table is stored) ?
gdb_disassembly wants the symtab that contains the line table
but is instead getting the primary symtab.
gdb/ChangeLog:
PR symtab/17559
* symtab.c (find_pc_line_symtab): New function.
* symtab.h (find_pc_line_symtab): Declare.
* disasm.c (gdb_disassembly): Call find_pc_line_symtab instead of
find_pc_symtab.
* tui/tui-disasm.c (tui_set_disassem_content): Ditto.
* tui/tui-hooks.c (tui_selected_frame_level_changed_hook): Ditto.
* tui/tui-source.c (tui_vertical_source_scroll): Ditto.
* tui/tui-win.c (make_visible_with_new_height): Ditto.
* tui/tui-winsource.c (tui_horizontal_source_scroll): Ditto.
(tui_display_main): Call find_pc_line_symtab instead of find_pc_line.
gdb/testsuite/ChangeLog:
PR symtab/17559
* gdb.base/line-symtabs.exp: New file.
* gdb.base/line-symtabs.c: New file.
* gdb.base/line-symtabs.h: New file.
The patch <https://sourceware.org/ml/gdb-patches/2014-03/msg00202.html>
fixed dw2-ifort-parameter.exp on powerpc64 by adding some labels to
get the start and end address of function func. This should also fix the
fail on thumb mode, however, this style is quite specific to gcc, and
other compiler, such as clang, may not guarantee the order of global
asms and functions. The test fails with clang:
$ make check RUNTESTFLAGS='dw2-ifort-parameter.exp CC_FOR_TARGET=clang'
(gdb) p/x param^M
No symbol "param" in current context.^M
(gdb) FAIL: gdb.dwarf2/dw2-ifort-parameter.exp: p/x param
With this patch applied, dw2-ifort-parameter.exp still passes for gcc
on arm thumb mode and popwerpc64, and it also passes for clang on
x86_linux.
gdb/testsuite:
2014-11-14 Yao Qi <yao@codesourcery.com>
* gdb.dwarf2/dw2-ifort-parameter.c: Remove inline asm.
(func): Add label func_label.
* gdb.dwarf2/dw2-ifort-parameter.exp (Dwarf::assemble):
Replace low_pc and high_pc with MACRO_AT_range.
Replace name, low_pc and high_pc with MACRO_AT_func.
Hi,
I see the fail in gdb.dwarf2/implptr-optimized-out.exp in thumb mode
(gdb) p p->f^M
No symbol "p" in current context.^M
(gdb) FAIL: gdb.dwarf2/implptr-optimized-out.exp: p p->f
and the crash on powerpc64
(gdb) continue^M
Continuing.^M
^M
Program received signal SIGSEGV, Segmentation fault.^M
0x7d82100810000828 in ?? ()
The cause of both is that we incorrectly set attribute low_pc, since
main isn't resolved to function start address on these targets.
In this patch, we replace attributes name, low_pc and high_pc with
MACRO_AT_func. The fail on thumb mode is fixed, and crash on
powerpc64 is fixed too.
gdb/testsuite:
2014-11-14 Yao Qi <yao@codesourcery.com>
* gdb.dwarf2/implptr-optimized-out.exp (Dwarf::assemble):
Replace name, low_pc and high_pc with MACRO_AT_func.
This patch is to use dwarf::assemble to generate debug information, and
remove implptr-optimized-out.S as a result.
gdb/testsuite:
2014-11-14 Yao Qi <yao@codesourcery.com>
* gdb.dwarf2/implptr-optimized-out.exp: Use Dwarf::assemble to
produce debug information.
* gdb.dwarf2/implptr-optimized-out.S: Removed.
On arm-none-eabi target thumb mode, I see the following fail,
p the_int^M
$2 = 99^M
(gdb) FAIL: gdb.dwarf2/dwz.exp: p the_int
and on powerpc64 target, we even can't get function main from object
file,
disassemble main^M
No function contains specified address.^M
(gdb) FAIL: gdb.dwarf2/dwz.exp: disassemble main
This patch is to use MACRO_AT_func attribute to get the main's start
address and end address correctly, and also remove some code dwz.exp
getting main's length. This patch fixes fails on both thumb mode and
powerpc64 target.
PASS: gdb.dwarf2/dwz.exp: p other_int
PASS: gdb.dwarf2/dwz.exp: p the_int
gdb/testsuite:
2014-11-14 Yao Qi <yao@codesourcery.com>
* gdb.dwarf2/dwz.exp: Remove the code to compile main.c to
object and get function length.
(Dwarf::assemble): Replace name, low_pc and high_pc attributes
with MACRO_AT_func.
(top-level): Replace gdb_compile and clean_restart with
prepare_for_testing.
* gdb.dwarf2/main.c (main): Add label main_label.
This patch addes DW macro attributes MACRO_AT_func and MACRO_AT_range
in dwarf assembler, which emits "DW_AT_low_pc func_start addr" and
"DW_AT_high_pc func_end addr". func_start and func_end are computed
automatically by proc function_range.
These two attributes are pseudo attribute or macro attribute, which
means they are not standard dwarf attribute in dwarf spec. Then can
be substituted or expanded to standard attributes or macro attributes.
See details in the comments to them. Dwarf assembler is extended to
handle them.
Now the attributes name/low_pc/high_pc can be replaced with
MACRO_AT_func like this:
subprogram {
{name main}
{low_pc main_start addr}
{high_pc main_end addr}
}
becomes:
subprogram {
{MACRO_AT_func { main ${srcdir}/${subdir}/${srcfile} }}
}
users don't have to worry about the start and end of function main, and
they only need to add a label main_label in main.
gdb/testsuite:
2014-11-14 Yao Qi <yao@codesourcery.com>
* lib/dwarf.exp (function_range): New procedure.
(Dwarf::_handle_macro_at_func): New procedure.
(Dwarf::_handle_macro_at_range): New procedure.
(Dwarf): Handle MACRO_AT_func and MACRO_AT_range.
This patch is to move some code to a new procedure _handle_attribute,
which will be used in my following patches.
gdb/testsuite:
2014-11-14 Yao Qi <yao@codesourcery.com>
* lib/dwarf.exp (_handle_DW_TAG): Move some code to ...
(_handle_attribute): New procedure.
Remove old-style function header variants from sepdebug.c. Eliminate
references to the removed locations "breakpoint 9" and "breakpoint 13"
from sepdebug.exp.
gdb/testsuite/ChangeLog:
* gdb.base/sepdebug.c: Remove #ifdef PROTOTYPES, keep prototyped
variant.
* gdb.base/sepdebug.exp: Drop references to removed code.
Remove old-style function header variants from list0.h and list1.c.
Fill the removed lines with comments or empty lines, such that the
line numbering is undisturbed. Changes to the line numbering would
require heavy adjustments to list.exp, where many line numbers are
hard-coded, as well as a fair amount of knowledge about the source
code in and around certain lines. Thus the dependency on the line
numbering can not be eliminated so easily, and it may not even be a
useful goal for a "list" test case. Another option might be to adjust
the literal line numbers in list.exp, but even that is not as
straightforward as it may seem, since the test case expects certain
source lines to be exactly n lines apart.
gdb/testsuite/ChangeLog:
* gdb.base/list0.h: Remove #ifdef PROTOTYPES, keep prototyped
variant. Preserve original line numbering.
* gdb.base/list1.c: Likewise.
Remove old-style function headers from break.c and break1.c. Adjust
break.exp accordingly; in particular eliminate references to the
removed locations "breakpoint 9, 13, and 16" from break.exp.
gdb/testsuite/ChangeLog:
* gdb.base/break.c: Remove #ifdef PROTOTYPES, keep prototyped
variant.
* gdb.base/break1.c: Likewise.
* gdb.base/break.exp: Drop references to removed code.
The previous patch did not indent perform_all_tests() correctly after
moving the main logic into it, to avoid obscuring the functional
changes. This patch fixes the indentation.
gdb/testsuite/ChangeLog:
* gdb.base/callfuncs.exp (perform_all_tests): Re-indent.
In callfuncs.exp, compile callfuncs.c with and without C function
header prototypes and execute all tests after each compilation.
gdb/testsuite/ChangeLog:
* gdb.base/callfuncs.exp: Remove 'prototypes' variable. Move main
logic into perform_all_tests() and invoke it with and without
function header prototypes.
(do_function_calls): Remove conditional XFAIL for PR 5318.
(rerun_and_prepare): Remove duplicate code.
(perform_all_tests): New. Main logic moved here.
The C source file for the 'callfuncs' test case did not compile with
-DNO_PROTOTYPES or -DPROTOTYPES. This patch fixes various syntax
errors under #ifdef NO_PROTOTYPES and a small typo under #ifdef
PROTOTYPES.
gdb/testsuite/ChangeLog:
* gdb.base/callfuncs.c (t_float_many_args): Fix syntax error in
code guarded by #ifdef NO_PROTOTYPES.
(t_double_many_args): Likewise.
(DEF_FUNC_MANY_ARGS_1): Likewise.
(DEF_FUNC_VALUES_1): Likewise.
(t_structs_ldc): Renamed from t_structs_fc in conditional code
guarded by #ifdef PROTOTYPES.
Remove the literal line number from a regexp in mi-console.exp. Add
an appropriate eye-catcher to mi-console.c and refer to that instead.
gdb/testsuite/ChangeLog:
* gdb.mi/mi-console.c: Add eye-catcher.
* gdb.mi/mi-console.exp (semihosted_string): Refer to eye-catcher
instead of literal line number.
Remove the literal line number from a regexp in shlib-call.exp. Add
an appropriate eye-catcher to shr2.c and refer to that instead.
gdb/testsuite/ChangeLog:
* gdb.base/shr2.c: Add eye-catcher.
* gdb.base/shlib-call.exp: Refer to eye-catcher instead of literal
line number.
Remove literal line numbers from the regexps in jump.exp. Add
appropriate eye-catchers to jump.c and refer to those instead.
gdb/testsuite/ChangeLog:
* gdb.base/jump.c: Add eye-catchers.
* gdb.base/jump.exp: Refer to eye-catchers instead of literal line
numbers.
Remove literal line numbers from the regexps in foll-exec.exp. Add
appropriate eye-catchers to foll-exec.c and execd-proc.c and refer to
those instead.
gdb/testsuite/ChangeLog:
* gdb.base/execd-prog.c: Add eye-catchers.
* gdb.base/foll-exec.c: Likewise.
* gdb.base/foll-exec.exp: Refer to eye-catchers instead of literal
line numbers.
Remove literal line numbers from the regexps in ending-run.exp. Add
appropriate eye-catchers to ending-run.c and refer to those instead.
gdb/testsuite/ChangeLog:
* gdb.base/ending-run.c: Add eye-catchers.
* gdb.base/ending-run.exp: Refer to eye-catchers instead of
literal line numbers.
Remove literal line numbers from the regexps in call-rt-st.exp. Add
appropriate eye-catchers to call-rt-st.c and refer to those instead.
gdb/testsuite/ChangeLog:
* gdb.base/call-rt-st.c: Add eye-catchers.
* gdb.base/call-rt-st.exp: Refer to eye-catchers instead of
literal line numbers.
Remove literal line numbers from the regexps in call-ar-st.exp. Add
appropriate eye-catchers to call-ar-st.c and refer to those instead.
gdb/testsuite/ChangeLog:
* gdb.base/call-ar-st.c: Add eye-catchers.
* gdb.base/call-ar-st.exp: Refer to eye-catchers instead of
literal line numbers.
Remove literal line numbers from the commands and regexps in dbx.exp.
Add appropriate eye-catchers to average.c and sum.c and refer to those
instead.
gdb/testsuite/ChangeLog:
* gdb.base/average.c: Add eye-catchers.
* gdb.base/sum.c: Likewise.
* gdb.base/dbx.exp: Use eye-catchers to determine line numbers for
regexps dynamically.
Remove literal line numbers from the regexps in so-impl-ld.exp. Add
appropriate eye-catchers to solib1.c and refer to those instead.
gdb/testsuite/ChangeLog:
* gdb.base/solib1.c: Add eye-catchers.
* gdb.base/so-impl-ld.exp: Match against eye-catchers instead of
literal line numbers.
The target->request_interrupt callback implements the handling for
ctrl-c. User types ctrl-c in GDB, GDB sends a \003 to the remote
target, and the remote targets stops the program with a SIGINT, just
like if the user typed ctrl-c in GDBserver's terminal.
The trouble is that using kill_lwp(signal_pid, SIGINT) sends the
SIGINT directly to the program's main thread. If that thread has
exited already, then that kill won't do anything.
Instead, send the SIGINT to the process group, just like GDB
does (see inf-ptrace.c:inf_ptrace_stop).
gdb.threads/leader-exit.exp is extended to cover the scenario. It
fails against GDBserver before the patch.
Tested on x86_64 Fedora 20, native and GDBserver.
gdb/gdbserver/
2014-11-12 Pedro Alves <palves@redhat.com>
* linux-low.c (linux_request_interrupt): Always send a SIGINT to
the process group instead of to a specific LWP.
gdb/testsuite/
2014-11-12 Pedro Alves <palves@redhat.com>
* gdb.threads/leader-exit.exp: Test sending ctrl-c works after the
leader has exited.
The gdb.arch/i386-bp_permanent.exp test is currently failing an
assertion recently added:
(gdb) stepi
../../src/gdb/infrun.c:2237: internal-error: resume: Assertion `sig != GDB_SIGNAL_0' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n)
FAIL: gdb.arch/i386-bp_permanent.exp: Single stepping past permanent breakpoint. (GDB internal error)
The assertion expects that the only reason we currently need to step a
breakpoint instruction is when we have a signal to deliver. But when
stepping a permanent breakpoint (with or without a signal) we also
reach this code.
The assertion is correct and the permanent breakpoints skipping code
is wrong.
Consider the case of the user doing "step/stepi" when stopped at a
permanent breakpoint. GDB's `resume' calls the
gdbarch_skip_permanent_breakpoint hook and then happily continues
stepping:
/* Normally, by the time we reach `resume', the breakpoints are either
removed or inserted, as appropriate. The exception is if we're sitting
at a permanent breakpoint; we need to step over it, but permanent
breakpoints can't be removed. So we have to test for it here. */
if (breakpoint_here_p (aspace, pc) == permanent_breakpoint_here)
{
gdbarch_skip_permanent_breakpoint (gdbarch, regcache);
}
But since gdbarch_skip_permanent_breakpoint already advanced the PC
manually, this ends up executing the instruction that is _after_ the
breakpoint instruction. The user-visible result is that a single-step
steps two instructions.
The gdb.arch/i386-bp_permanent.exp test is actually ensuring that
that's indeed how things work. It runs to an int3 instruction, does
"stepi", and checks that "leave" was executed with that "stepi". Like
this:
(gdb) b *0x0804848c
Breakpoint 2 at 0x804848c
(gdb) c
Continuing.
Breakpoint 2, 0x0804848c in standard ()
(gdb) disassemble
Dump of assembler code for function standard:
0x08048488 <+0>: push %ebp
0x08048489 <+1>: mov %esp,%ebp
0x0804848b <+3>: push %edi
=> 0x0804848c <+4>: int3
0x0804848d <+5>: leave
0x0804848e <+6>: ret
0x0804848f <+7>: nop
(gdb) si
0x0804848e in standard ()
(gdb) disassemble
Dump of assembler code for function standard:
0x08048488 <+0>: push %ebp
0x08048489 <+1>: mov %esp,%ebp
0x0804848b <+3>: push %edi
0x0804848c <+4>: int3
0x0804848d <+5>: leave
=> 0x0804848e <+6>: ret
0x0804848f <+7>: nop
End of assembler dump.
(gdb)
One would instead expect that a stepi at 0x0804848c stops at
0x0804848d, _before_ the "leave" is executed. This commit changes GDB
this way. Care is taken to make stepping into a signal handler when
the step starts at a permanent breakpoint instruction work correctly.
The patch adjusts gdb.arch/i386-bp_permanent.exp in this direction,
and also makes it work on x86_64 (currently it only works on i*86).
The patch also adds a new gdb.base/bp-permanent.exp test that
exercises many different code paths related to stepping permanent
breakpoints, including the stepping with signals cases. The test uses
"hack/trick" to make it work on all (or most) platforms -- it doesn't
really hard code a breakpoint instruction.
Tested on x86_64 Fedora 20, native and gdbserver.
gdb/
2014-11-12 Pedro Alves <palves@redhat.com>
* infrun.c (resume): Clear the thread's 'stepped_breakpoint' flag.
Rewrite stepping over a permanent breakpoint.
(thread_still_needs_step_over, proceed): Don't set
stepping_over_breakpoint for permanent breakpoints.
(handle_signal_stop): Don't clear stepped_breakpoint. Also pull
single-step breakpoints out of the target on hardware step
targets.
(process_event_stop_test): If stepping a permanent breakpoint
doesn't hit the step-resume breakpoint, delete the step-resume
breakpoint.
(switch_back_to_stepped_thread): Also check if the stepped thread
has advanced already on hardware step targets.
(currently_stepping): Return true if the thread stepped a
breakpoint.
gdb/testsuite/
2014-11-12 Pedro Alves <palves@redhat.com>
* gdb.arch/i386-bp_permanent.c: New file.
* gdb.arch/i386-bp_permanent.exp: Don't skip on x86_64.
(srcfile): Set to i386-bp_permanent.c.
(top level): Adjust to work in both 32-bit and 64-bit modes. Test
that stepi does not execute the 'leave' instruction, instead of
testing it does execute.
* gdb.base/bp-permanent.c: New file.
* gdb.base/bp-permanent.exp: New file.
When searching static symbols, gdb would search over all
expanded symtabs of all objfiles, and if that fails only then
would it search all partial/gdb_index tables of all objfiles.
This means that the user could get a random instance of the
symbol depending on what symtabs have been previously expanded.
Now the search is consistent, searching each objfile completely
before proceeding to the next one.
gdb/ChangeLog:
PR symtab/17564
* symtab.c (lookup_symbol_in_all_objfiles): Delete.
(lookup_static_symbol): Move definition to new location and rewrite.
(lookup_symbol_in_objfile): New function.
(lookup_symbol_global_iterator_cb): Call it.
gdb/testsuite/ChangeLog:
PR symtab/17564
* gdb.base/symtab-search-order.exp: New file.
* gdb.base/symtab-search-order.c: New file.
* gdb.base/symtab-search-order-1.c: New file.
* gdb.base/symtab-search-order-shlib-1.c: New file.
Running gdb.base/sigstep.exp with --target=i686-pc-linux-gnu on a
64-bit kernel naturally trips on PR gdb/17511 as well, given this is a
kernel bug.
I haven't really tested a real 32-bit kernel/machine, but given the
code in question in the kernel is shared between 32-bit and 64-bit,
I'm quite sure the bug triggers in those cases as well.
So, simply xfail i?86-*-linux* too.
gdb/testsuite/
2014-11-07 Pedro Alves <palves@redhat.com>
PR gdb/17511
* gdb.base/sigstep.exp (in_handler_map) <si+advance>: xfail
i?86-*-linux*.
When evaluating method calls under EVAL_SKIP, the "object" and the
arguments to the method should also be evaluated under EVAL_SKIP,
instead of skipping to evaluate them as was being done previously.
gdb/ChangeLog:
PR c++/17494
* eval.c (evaluate_subexp_standard): Evaluate the "object" and
the method args also under EVAL_SKIP when evaluating method
calls under EVAL_SKIP.
gdb/testsuite/ChangeLog:
PR c++/17494
* gdb.cp/pr17494.cc: New file.
* gdb.cp/pr17494.exp: New file.
The test in gdb.python/python.exp tests "extended-prompt" and expects
working directory is printed. However, working directory on remote
host doesn't have "gdb/testsuite", so the test fails on remote host
like:
set extended-prompt \w ^M
^M
/home/yao FAIL: gdb.python/python.exp: set extended prompt working directory (timeout)
This patch is to get the working directory first, and use it to match
the output of "set extended-prompt \\w ". It works for remote host
and non remote host.
gdb/testsuite:
2014-11-02 Yao Qi <yao@codesourcery.com>
* gdb.python/python.exp: Get working directory and match the
output of "set extended-prompt \\w " with it.
gdb/ChangeLog:
* NEWS: Mention ability add attributes to gdb.Objfile and
gdb.Progspace objects.
* python/py-objfile.c (objfile_object): New member dict.
(objfpy_dealloc): Py_XDECREF dict.
(objfpy_initialize): Initialize dict.
(objfile_getset): Add __dict__.
(objfile_object_type): Set tp_dictoffset member.
* python/py-progspace.c (progspace_object): New member dict.
(pspy_dealloc): Py_XDECREF dict.
(pspy_initialize): Initialize dict.
(pspace_getset): Add __dict__.
(pspace_object_type): Set tp_dictoffset member.
gdb/doc/ChangeLog:
* python.texi (Progspaces In Python): Document ability to add
random attributes to gdb.Progspace objects.
(Objfiles In Python): Document ability to add random attributes to
gdb.objfile objects.
gdb/testsuite/ChangeLog:
* gdb.python/py-objfile.exp: Add tests for setting random attributes
in objfiles.
* gdb.python/py-progspace.exp: Add tests for setting random attributes
in progspaces.
Several GDB tests change directory before compiling the test program
in order to test source file names that include directories. This
doesn't work on a remote host because default_target_compile in
DejaGnu's target.exp copies each source file with
"[remote_download host $x]" which uses "[file tail $file] to strip
off the directory of each file. If the source directory is remote
mounted on the host, this also leaves copied files in the source
directory.
A similar skip is already used in gdb.test/fullname.exp:
# We rely on being able to copy things around.
if { [is_remote host] } {
untested "setting breakpoints by full path"
return -1
}
This patch causes three GDB tests that use "cd" to be skipped for a
remote host. For gdb.base/fullpath-expand.exp this eliminates two
failures and prevents the test from leaving files fullpath-expand.c
and fullpath-expand-func.c in gdb/testsuite. For
gdb.base/realname-expand.exp it eliminates two failures. For
gdb.linespec/macro-relative.exp it prevents file macro-relative.c
from being left in gdb/testsuite/gdb.linespec/base/two.
gdb/testsuite/
* gdb.base/fullpath-expand.exp: Skip for a remote host.
* gdb.base/realname-expand.exp: Likewise.
* gdb.linespec/macro-relative.exp: Likewise.
infrun.c:
5392 /* Did we find the stepping thread? */
5393 if (tp->control.step_range_end)
5394 {
5395 /* Yep. There should only one though. */
5396 gdb_assert (stepping_thread == NULL);
5397
5398 /* The event thread is handled at the top, before we
5399 enter this loop. */
5400 gdb_assert (tp != ecs->event_thread);
5401
5402 /* If some thread other than the event thread is
5403 stepping, then scheduler locking can't be in effect,
5404 otherwise we wouldn't have resumed the current event
5405 thread in the first place. */
5406 gdb_assert (!schedlock_applies (currently_stepping (tp)));
5407
5408 stepping_thread = tp;
5409 }
Like:
gdb/infrun.c:5406: internal-error: switch_back_to_stepped_thread: Assertion `!schedlock_applies (1)' failed.
The way the assertion is written is assuming that with schedlock=step
we'll always leave threads other than the one with the stepping range
locked, while that's not true with the "next" command. With schedlock
"step", other threads still run unlocked when "next" detects a
function call and steps over it. Whether that makes sense or not,
still, it's documented that way in the manual. If another thread hits
an event that doesn't cause a stop while the nexting thread steps over
a function call, we'll get here and fail the assertion.
The fix is just to adjust the assertion. Even though we found the
stepping thread, we'll still step-over the breakpoint that just
triggered correctly.
Surprisingly, gdb.threads/schedlock.exp doesn't have any test that
steps over a function call. This commits fixes that. This ensures
that "next" doesn't switch focus to another thread, and checks whether
other threads run locked or not, depending on scheduler locking mode
and command. There's a lot of duplication in that file that this ends
cleaning up. There's more that could be cleaned up, but that would
end up an unrelated change, best done separately.
This new coverage in schedlock.exp happens to trigger the internal
error in question, like so:
FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=1: next to increment (1) (GDB internal error)
FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=1: next to increment (3) (GDB internal error)
FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=1: next to increment (5) (GDB internal error)
FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=1: next to increment (7) (GDB internal error)
FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=1: next to increment (9) (GDB internal error)
FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=1: next does not change thread (switched to thread 0)
FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=1: current thread advanced - unlocked (wrong amount)
That's because we have more than one thread running the same loop, and
while one thread is stepping over a function call, the other thread
hits the step-resume breakpoint of the first, which needs to be
stepped over, and we end up in switch_back_to_stepped_thread exactly
in the problem case.
I think a simpler and more directed test is also useful, to not rely
on internal breakpoint magics. So this commit also adds a test that
has a thread trip on a conditional breakpoint that doesn't cause a
user-visible stop while another thread is stepping over a call. That
currently fails like this:
FAIL: gdb.threads/next-bp-other-thread.exp: schedlock=step: next over function call (GDB internal error)
Tested on x86_64 Fedora 20.
gdb/
2014-10-29 Pedro Alves <palves@redhat.com>
PR gdb/17408
* infrun.c (switch_back_to_stepped_thread): Use currently_stepping
instead of assuming a thread with a stepping range is always
stepping.
gdb/testsuite/
2014-10-29 Pedro Alves <palves@redhat.com>
PR gdb/17408
* gdb.threads/schedlock.c (some_function): New function.
(call_function): New global.
(MAYBE_CALL_SOME_FUNCTION): New macro.
(thread_function): Call it.
* gdb.threads/schedlock.exp (get_args): Add description parameter,
and use it instead of a global counter. Adjust all callers.
(get_current_thread): Use "find current thread" for test message
here rather than having all callers pass down the same string.
(goto_loop): New procedure, factored out from ...
(my_continue): ... this.
(step_ten_loops): Change parameter from test message to command to
use. Adjust.
(list_count): Delete global.
(check_result): New procedure, factored out from duplicate top
level code.
(continue tests): Wrap in with_test_prefix.
(test_step): New procedure, factored out from duplicate top level
code.
(top level): Test "step" in combination with all scheduler-locking
modes. Test "next" in combination with all scheduler-locking
modes, and in combination with stepping over a function call or
not.
* gdb.threads/next-bp-other-thread.c: New file.
* gdb.threads/next-bp-other-thread.exp: New file.
This PR shows that GDB can easily trigger an assertion here, in
infrun.c:
5392 /* Did we find the stepping thread? */
5393 if (tp->control.step_range_end)
5394 {
5395 /* Yep. There should only one though. */
5396 gdb_assert (stepping_thread == NULL);
5397
5398 /* The event thread is handled at the top, before we
5399 enter this loop. */
5400 gdb_assert (tp != ecs->event_thread);
5401
5402 /* If some thread other than the event thread is
5403 stepping, then scheduler locking can't be in effect,
5404 otherwise we wouldn't have resumed the current event
5405 thread in the first place. */
5406 gdb_assert (!schedlock_applies (currently_stepping (tp)));
5407
5408 stepping_thread = tp;
5409 }
Like:
gdb/infrun.c:5406: internal-error: switch_back_to_stepped_thread: Assertion `!schedlock_applies (1)' failed.
The way the assertion is written is assuming that with schedlock=step
we'll always leave threads other than the one with the stepping range
locked, while that's not true with the "next" command. With schedlock
"step", other threads still run unlocked when "next" detects a
function call and steps over it. Whether that makes sense or not,
still, it's documented that way in the manual. If another thread hits
an event that doesn't cause a stop while the nexting thread steps over
a function call, we'll get here and fail the assertion.
The fix is just to adjust the assertion. Even though we found the
stepping thread, we'll still step-over the breakpoint that just
triggered correctly.
Surprisingly, gdb.threads/schedlock.exp doesn't have any test that
steps over a function call. This commits fixes that. This ensures
that "next" doesn't switch focus to another thread, and checks whether
other threads run locked or not, depending on scheduler locking mode
and command. There's a lot of duplication in that file that this ends
cleaning up. There's more that could be cleaned up, but that would
end up an unrelated change, best done separately.
This new coverage in schedlock.exp happens to trigger the internal
error in question, like so:
FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=1: next to increment (1) (GDB internal error)
FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=1: next to increment (3) (GDB internal error)
FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=1: next to increment (5) (GDB internal error)
FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=1: next to increment (7) (GDB internal error)
FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=1: next to increment (9) (GDB internal error)
FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=1: next does not change thread (switched to thread 0)
FAIL: gdb.threads/schedlock.exp: schedlock=step: cmd=next: call_function=1: current thread advanced - unlocked (wrong amount)
That's because we have more than one thread running the same loop, and
while one thread is stepping over a function call, the other thread
hits the step-resume breakpoint of the first, which needs to be
stepped over, and we end up in switch_back_to_stepped_thread exactly
in the problem case.
I think a simpler and more directed test is also useful, to not rely
on internal breakpoint magics. So this commit also adds a test that
has a thread trip on a conditional breakpoint that doesn't cause a
user-visible stop while another thread is stepping over a call. That
currently fails like this:
FAIL: gdb.threads/next-bp-other-thread.exp: schedlock=step: next over function call (GDB internal error)
Tested on x86_64 Fedora 20.
gdb/
2014-10-29 Pedro Alves <palves@redhat.com>
PR gdb/17408
* infrun.c (switch_back_to_stepped_thread): Use currently_stepping
instead of assuming a thread with a stepping range is always
stepping.
gdb/testsuite/
2014-10-29 Pedro Alves <palves@redhat.com>
PR gdb/17408
* gdb.threads/schedlock.c (some_function): New function.
(call_function): New global.
(MAYBE_CALL_SOME_FUNCTION): New macro.
(thread_function): Call it.
* gdb.threads/schedlock.exp (get_args): Add description parameter,
and use it instead of a global counter. Adjust all callers.
(get_current_thread): Use "find current thread" for test message
here rather than having all callers pass down the same string.
(goto_loop): New procedure, factored out from ...
(my_continue): ... this.
(step_ten_loops): Change parameter from test message to command to
use. Adjust.
(list_count): Delete global.
(check_result): New procedure, factored out from duplicate top
level code.
(continue tests): Wrap in with_test_prefix.
(test_step): New procedure, factored out from duplicate top level
code.
(top level): Test "step" in combination with all scheduler-locking
modes. Test "next" in combination with all scheduler-locking
modes, and in combination with stepping over a function call or
not.
* gdb.threads/next-bp-other-thread.c: New file.
* gdb.threads/next-bp-other-thread.exp: New file.
This is more of a readline/terminal issue than a Python one.
PR17372 is a regression in 7.8 caused by the fix for PR17072:
commit 0017922d02
Author: Pedro Alves <palves@redhat.com>
Date: Mon Jul 14 19:55:32 2014 +0100
Background execution + pagination aborts readline/gdb
gdb_readline_wrapper_line removes the handler after a line is
processed. Usually, we'll end up re-displaying the prompt, and that
reinstalls the handler. But if the output is coming out of handling
a stop event, we don't re-display the prompt, and nothing restores the
handler. So the next input wakes up the event loop and calls into
readline, which aborts.
...
gdb/
2014-07-14 Pedro Alves <palves@redhat.com>
PR gdb/17072
* top.c (gdb_readline_wrapper_line): Tweak comment.
(gdb_readline_wrapper_cleanup): If readline is enabled, reinstall
the input handler callback.
The problem is that installing the input handler callback also preps
the terminal, putting it in raw mode and with echo disabled, which is
bad if we're going to call a command that assumes cooked/canonical
mode, and echo enabled, like in the case of the PR, Python's
interactive shell. Another example I came up with that doesn't depend
on Python is starting a subshell with "(gdb) shell /bin/sh" from a
multi-line command. Tests covering both these examples are added.
The fix is to revert the original fix for PR gdb/17072, and instead
restore the callback handler after processing an asynchronous target
event.
Furthermore, calling rl_callback_handler_install when we already have
some input in readline's line buffer discards that input, which is
obviously a bad thing to do while the user is typing. No specific
test is added for that, because I first tried calling it even if the
callback handler was still installed and that resulted in hundreds of
failures in the testsuite.
gdb/
2014-10-29 Pedro Alves <palves@redhat.com>
PR python/17372
* event-top.c (change_line_handler): Call
gdb_rl_callback_handler_remove instead of
rl_callback_handler_remove.
(callback_handler_installed): New global.
(gdb_rl_callback_handler_remove, gdb_rl_callback_handler_install)
(gdb_rl_callback_handler_reinstall): New functions.
(display_gdb_prompt): Call gdb_rl_callback_handler_remove and
gdb_rl_callback_handler_install instead of
rl_callback_handler_remove and rl_callback_handler_install.
(gdb_disable_readline): Call gdb_rl_callback_handler_remove
instead of rl_callback_handler_remove.
* event-top.h (gdb_rl_callback_handler_remove)
(gdb_rl_callback_handler_install)
(gdb_rl_callback_handler_reinstall): New declarations.
* infrun.c (reinstall_readline_callback_handler_cleanup): New
cleanup function.
(fetch_inferior_event): Install it.
* top.c (gdb_readline_wrapper_line) Call
gdb_rl_callback_handler_remove instead of
rl_callback_handler_remove.
(gdb_readline_wrapper_cleanup): Don't call
rl_callback_handler_install.
gdb/testsuite/
2014-10-29 Pedro Alves <palves@redhat.com>
PR python/17372
* gdb.python/python.exp: Test a multi-line command that spawns
interactive Python.
* gdb.base/multi-line-starts-subshell.exp: New file.
In gdb.base/fileio.c, some functions may depend on others. For
example, test_rename renames a file to one directory which is created
in test_system. That is means, if test_system fails, test_rename
fails too, which is not a good practise, IMO.
In test_system, system ("mkdir -p XX") is used to create directories
needed for test_rename. In this patch, we use dejagnu remote_exec
proc to create these directories on host.
In my gdb testing, mingw32 host and arm-none-eabi target, system
("mkdir -p XX") doesn't work properly (this issue can be addressed
separately), and this patch fixes the following fails.
FAIL: gdb.base/fileio.exp: Renaming a directory to a non-empty directory returns ENOTEMPTY or EEXIST
FAIL: gdb.base/fileio.exp: Unlink a file
FAIL: gdb.base/fileio.exp: Unlinking a file in a directory w/o write access returns EACCES
gdb/testsuite:
2014-10-29 Yao Qi <yao@codesourcery.com>
* gdb.base/fileio.exp: Make directories on host.
I see the following fail in fileio.exp on mingw32 host gdb,
rename 1: ret = -1, errno = 13^M
^M
Breakpoint 2, stop () at fileio.c:76^M
76 static void stop () {}^M
(gdb) FAIL: gdb.base/fileio.exp: Rename a file
the test fails to rename a file which is not expected. The previous
test test_write doesn't close the file, so the rename fails as a
result on Windows. This patch fixes it by closing file in test_write,
and the fail goes away.
rename 1: ret = 0, errno = 0 OK^M
^M
Breakpoint 2, stop () at fileio.c:76^M
76 static void stop () {}^M
(gdb) PASS: gdb.base/fileio.exp: Rename a file
gdb/testsuite:
2014-10-29 Yao Qi <yao@codesourcery.com>
* gdb.base/fileio.c (test_write): Close the file.
TL;DR - if we step an instruction that is as long as
decr_pc_after_break (1-byte on x86) right after removing the
breakpoint at PC, in non-stop mode, adjust_pc_after_break adjusts the
PC, but it shouldn't.
In non-stop mode, when a breakpoint is removed, it is moved to the
"moribund locations" list. This is because other threads that are
running may have tripped on that breakpoint as well, and we haven't
heard about it. When a trap is reported, we check if perhaps it was
such a deleted breakpoint that caused the trap. If so, we also need
to adjust the PC (decr_pc_after_break).
Now, say that, on x86:
- a breakpoint was placed at an address where we have an instruction
of the same length as decr_pc_after_break on this arch (1 on x86).
- the breakpoint is removed, and thus put on the moribund locations
list.
- the thread is single-stepped.
As there's no breakpoint inserted at PC anymore, the single-step
actually executes the 1-byte instruction normally. GDB should _not_
adjust the PC for the resulting SIGTRAP. But, adjust_pc_after_break
confuses the step SIGTRAP reported for this single-step as being a
SIGTRAP for the moribund location of the breakpoint that used to be at
the previous PC, and so infrun applies the decr_pc_after_break
adjustment incorrectly.
The confusion comes from the special case mentioned in the comment:
static void
adjust_pc_after_break (struct execution_control_state *ecs)
{
...
As a special case, we could have hardware single-stepped a
software breakpoint. In this case (prev_pc == breakpoint_pc),
we also need to back up to the breakpoint address. */
if (thread_has_single_step_breakpoints_set (ecs->event_thread)
|| !ptid_equal (ecs->ptid, inferior_ptid)
|| !currently_stepping (ecs->event_thread)
|| (ecs->event_thread->stepped_breakpoint
&& ecs->event_thread->prev_pc == breakpoint_pc))
regcache_write_pc (regcache, breakpoint_pc);
The condition that incorrectly triggers is the
"ecs->event_thread->prev_pc == breakpoint_pc" one.
Afterwards, the next resume resume re-executes an instruction that had
already executed, which if you're lucky, results in the inferior
crashing. If you're unlucky, you'll get silent bad behavior...
The fix is to remember that we stepped a breakpoint. Turns out the
only case we step a breakpoint instruction today isn't covered by the
testsuite. It's the case of a 'handle nostop" signal arriving while a
step is in progress _and_ we have a software watchpoint, which forces
always single-stepping. This commit extends sigstep.exp to cover
that, and adds a new test for the adjust_pc_after_break issue.
Tested on x86_64 Fedora 20, native and gdbserver.
gdb/
2014-10-28 Pedro Alves <palves@redhat.com>
PR gdb/12623
* gdbthread.h (struct thread_info) <stepped_breakpoint>: New
field.
* infrun.c (resume) <stepping breakpoint instruction>: Set the
thread's stepped_breakpoint field. Skip if reverse debugging.
Add comment.
(init_thread_stepping_state, handle_signal_stop): Clear the
thread's stepped_breakpoint field.
gdb/testsuite/
2014-10-28 Pedro Alves <palves@redhat.com>
PR gdb/12623
* gdb.base/sigstep.c (no_handler): New global.
(main): If 'no_handler is true, set the signal handlers to
SIG_IGN.
* gdb.base/sigstep.exp (breakpoint_over_handler): Add
with_sw_watch and no_handler parameters. Handle them.
(top level) <stepping over handler when stopped at a breakpoint
test>: Add a test axis for testing with a software watchpoint, and
another for testing with the signal handler set to SIG_IGN.
* gdb.base/step-sw-breakpoint-adjust-pc.c: New file.
* gdb.base/step-sw-breakpoint-adjust-pc.exp: New file.
I noticed that when I single-step into a signal handler with a
pending/queued signal, the following single-steps while the program is
in the signal handler leave $eflags.TF set. That means subsequent
continues will trap after one instruction, resulting in a spurious
SIGTRAP being reported to the user.
This is a kernel bug; I've reported it to kernel devs (turned out to
be a known bug). I'm seeing it on x86_64 Fedora 20 (Linux
3.16.4-200.fc20.x86_64), and I was told it's still not fixed upstream.
This commit extends gdb.base/sigstep.exp to cover this use case,
xfailed.
Here's what the bug looks like:
(gdb) start
Temporary breakpoint 1, main () at si-handler.c:48
48 setup ();
(gdb) next
50 global = 0; /* set break here */
Let's queue a signal, so we can step into the handler:
(gdb) handle SIGUSR1
Signal Stop Print Pass to program Description
SIGUSR1 Yes Yes Yes User defined signal 1
(gdb) queue-signal SIGUSR1
TF is not set:
(gdb) display $eflags
1: $eflags = [ PF ZF IF ]
Now step into the handler -- "si" does PTRACE_SINGLESTEP+SIGUSR1:
(gdb) si
sigusr1_handler (sig=0) at si-handler.c:31
31 {
1: $eflags = [ PF ZF IF ]
No TF yet. But another single-step...
(gdb) si
0x0000000000400621 31 {
1: $eflags = [ PF ZF TF IF ]
... ends up with TF left set. This results in PTRACE_CONTINUE
trapping after each instruction is executed:
(gdb) c
Continuing.
Program received signal SIGTRAP, Trace/breakpoint trap.
0x0000000000400624 in sigusr1_handler (sig=0) at si-handler.c:31
31 {
1: $eflags = [ PF ZF TF IF ]
(gdb) c
Continuing.
Program received signal SIGTRAP, Trace/breakpoint trap.
sigusr1_handler (sig=10) at si-handler.c:32
32 global = 0;
1: $eflags = [ PF ZF TF IF ]
(gdb)
Note that even another PTRACE_SINGLESTEP does not fix it:
(gdb) si
33 }
1: $eflags = [ PF ZF TF IF ]
(gdb)
Eventually, it gets "fixed" by the rt_sigreturn syscall, when
returning out of the handler:
(gdb) bt
#0 sigusr1_handler (sig=10) at si-handler.c:33
#1 <signal handler called>
#2 main () at si-handler.c:50
(gdb) set disassemble-next-line on
(gdb) si
0x0000000000400632 33 }
0x0000000000400631 <sigusr1_handler+17>: 5d pop %rbp
=> 0x0000000000400632 <sigusr1_handler+18>: c3 retq
1: $eflags = [ PF ZF TF IF ]
(gdb)
<signal handler called>
=> 0x0000003b36a358f0 <__restore_rt+0>: 48 c7 c0 0f 00 00 00 mov $0xf,%rax
1: $eflags = [ PF ZF TF IF ]
(gdb) si
<signal handler called>
=> 0x0000003b36a358f7 <__restore_rt+7>: 0f 05 syscall
1: $eflags = [ PF ZF TF IF ]
(gdb)
main () at si-handler.c:50
50 global = 0; /* set break here */
=> 0x000000000040066b <main+9>: c7 05 cb 09 20 00 00 00 00 00 movl $0x0,0x2009cb(%rip) # 0x601040 <global>
1: $eflags = [ PF ZF IF ]
(gdb)
The bug doesn't happen if we instead PTRACE_CONTINUE into the signal
handler -- e.g., set a breakpoint in the handler, queue a signal, and
"continue".
gdb/testsuite/
2014-10-28 Pedro Alves <palves@redhat.com>
PR gdb/17511
* gdb.base/sigstep.c (handler): Add a few more writes to 'done'.
* gdb.base/sigstep.exp (other_handler_location): New global.
(advance): Support stepping into the signal handler, and running
commands while in the handler.
(in_handler_map): New global.
(top level): In the advance test, add combinations for getting
into the handler with stepping commands, and for running commands
in the handler. Add comment descripting the advancei tests.
Hacking on sigstep.exp, I found it harder to understand and extend
than ideal.
- GDB is currently not restarted between the different
tests/combinations in the file, and some parts of the tests' setup
are done on the top level, and shared between tests. It's not
trivial to understand which breakpoints each test procedure expects
to be set or not set. And it's not trivial to disable parts of the
test if you want quickly try out just a subset of the tests
(running the whole file takes a bit).
- Because GDB is currently not restarted between tests, if some test
triggers a ptrace/kernel bug, the following tests may end up with
cascading fails. That makes it hard to add a test to cover a
kernel bug that isn't fixed yet, with a xfail/kfail. E.g,. note
how with kernels with bug gdb/8744 (stepi over sigreturn syscall
exits program) the test program exits, and nothing restarts it
afterwards...
- The manual test message prefix management gets a bit in the way.
Nowadays, we have with_test_prefix which makes it simpler.
- 'i' is used as parameter name in the various procedures, meaning
'the command the test', which isn't as obvious as it could.
This commit addresses all that.
gdb/testsuite/
2014-10-28 Pedro Alves <palves@redhat.com>
* gdb.base/sigstep.exp: Use build_executable instead of
prepare_for_testing.
(top level): Move code that starts GDB, runs to main and creates a
display to ...
(restart): ... this new procedure.
(top level): Move backtrace from signal handler test to ...
(validate_backtrace): ... this new procedure.
(advance, advancei): Rename parameter from 'i' to 'cmd'. Use
with_test_prefix. Always restart GDB.
(skip_to_handler): Rename parameter from 'i' to 'cmd'. Use
with_test_prefix. Always restart GDB. No need to delete
breakpoints after the test.
(test_skip_handler): Remove prefix parameter.
(skip_over_handler, breakpoint_to_handler)
(breakpoint_to_handler_entry, breakpoint_over_handler): Rename
parameter from 'i' to 'cmd'. Use with_test_prefix. Always
restart GDB. No need to delete breakpoints after the test.
(top level): Use foreach to call the test procedures with
different commands.
This makes it easier to find the bugs in Bugzilla.
gdb/testsuite/
2014-10-28 Pedro Alves <palves@redhat.com>
* gdb.base/sigaltstack.exp: Update to use Bugzilla bug numbers
instead of GNATS numbers.
* gdb.base/sigbpt.exp: Likewise.
* gdb.base/siginfo.exp: Likewise.
* gdb.base/sigstep.exp: Likewise.
I noticed that "si" behaves differently when a "handle nostop" signal
arrives while the step is in progress, depending on whether the
program was stopped at a breakpoint when "si" was entered.
Specifically, in case GDB needs to step off a breakpoint, the handler
is skipped and the program stops in the next "mainline" instruction.
Otherwise, the "si" stops in the first instruction of the signal
handler.
I was surprised the testsuite doesn't catch this difference. Turns
out gdb.base/sigstep.exp covers a bunch of cases related to stepping
and signal handlers, but does not test stepi nor nexti, only
step/next/continue.
My first reaction was that stopping in the signal handler was the
correct thing to do, as it's where the next user-visible instruction
that is executed is. I considered then "nexti" -- a signal handler
could be reasonably considered a subroutine call to step over, it'd
seem intuitive to me that "nexti" would skip it.
But then, I realized that signals that arrive while a plain/line
"step" is in progress _also_ have their handler skipped. A user might
well be excused for being confused by this, given:
(gdb) help step
Step program until it reaches a different source line.
And the signal handler's sources will be in different source lines,
after all.
I think that having to explain that "stepi" steps into handlers, (and
that "nexti" wouldn't according to my reasoning above), while "step"
does not, is a sign of an awkward interface.
E.g., if a user truly is interested in stepping into signal handlers,
then it's odd that she has to either force the signal to "handle
stop", or recall to do "stepi" whenever such a signal might be
delivered. For that use case, it'd seem nicer to me if "step" also
stepped into handlers.
This suggests to me that we either need a global "step-into-handlers"
setting, or perhaps better, make "handle pass/nopass stop/nostop
print/noprint" have have an additional axis - "handle
stepinto/nostepinto", so that the user could configure whether
handlers for specific signals should be stepped into.
In any case, I think it's simpler (and thus better) for all step
commands to behave the same. This commit thus makes "si/ni" skip
handlers for "handle nostop" signals that arrive while the command was
already in progress, like step/next do.
To be clear, nothing changes if the program was stopped for a signal,
and the user enters a stepping command _then_ -- GDB still steps into
the handler. The change concerns signals that don't cause a stop and
that arrive while the step is in progress.
Tested on x86_64 Fedora 20, native and gdbserver.
gdb/
2014-10-27 Pedro Alves <palves@redhat.com>
* infrun.c (handle_signal_stop): Also skip handlers when a random
signal arrives while handling a "stepi" or a "nexti". Set the
thread's 'step_after_step_resume_breakpoint' flag.
gdb/doc/
2014-10-27 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Continuing and Stepping): Add cross reference to
info on stepping and signal handlers.
(Signals): Explain stepping and signal handlers. Add context
index entry, and cross references.
gdb/testsuite/
2014-10-27 Pedro Alves <palves@redhat.com>
* gdb.base/sigstep.c (dummy): New global.
(main): Issue a couple writes to the new global.
* gdb.base/sigstep.exp (get_next_pc, test_skip_handler): New
procedures.
(skip_over_handler): Use test_skip_handler.
(top level): Call skip_over_handler for stepi and nexti too.
(breakpoint_over_handler): Use test_skip_handler.
(top level): Call breakpoint_over_handler for stepi and nexti too.
I see the following fails on powerpc64-linux,
(gdb) target tfile tfile-basic.tf^M
warning: Uploaded tracepoint 1 has no source location, using raw address^M
Tracepoint 1 at 0x10012358^M
Created tracepoint 1 for target's tracepoint 1 at 0x10012358.^M
(gdb) PASS: gdb.trace/tfile.exp: target tfile tfile-basic.tf
info trace^M
Num Type Disp Enb Address What^M
1 tracepoint keep y 0x0000000010012358 <write_basic_trace_file>^M
installed on target^M
(gdb) FAIL: gdb.trace/tfile.exp: info tracepoints on trace file
-target-select tfile tfile-basic.tf^M
=thread-group-started,id="i1",pid="1"^M
=thread-created,id="1",group-id="i1"^M
&"warning: Uploaded tracepoint 1 has no source location, using raw address\n"^M
=breakpoint-created,bkpt={number="1",type="tracepoint",disp="keep",enabled="y",
addr="0x0000000010012358",at="<write_basic_trace_file>",thread-groups=["i1"],
times="0",installed="y",original-location="*0x10012358"}^M
~"Created tracepoint 1 for target's tracepoint 1 at 0x10012358.\n"^M
^connected^M
(gdb) ^M
FAIL: gdb.trace/mi-traceframe-changed.exp: tfile: select trace file
These fails are caused by writing function descriptor address into trace
file instead of function address. This patch is to teach tfile.c to
write function address on powerpc64 target. With this patch applied,
fails in tfile.exp and mi-traceframe-changed.exp are fixed. Is it
OK?
gdb/testsuite:
2014-10-27 Yao Qi <yao@codesourcery.com>
* gdb.trace/tfile.c (adjust_function_address)
[__powerpc64__ && _CALL_ELF != 2]: Get function address from
function descriptor.
This commit modifies the code that prints attach and detach messages
related to following fork and vfork. The changes include using
target_terminal_ours_for_output instead of target_terminal_ours,
printing "vfork" instead of "fork" for all vfork-related messages,
and using _() for the format strings of all of the messages.
We also add a "detach" message for when a fork parent is detached.
Previously in this case the only message was notification of attaching
to the child. We still do not print any messages when following the
parent and detaching the child (the default). The rationale for this
is that from the user's perspective the new child was never attached.
Note that all of these messages are only printed when 'verbose' is set
or when debugging is turned on.
The tests gdb.base/foll-fork.exp and gdb.base/foll-vfork.exp were
modified to check for the new message.
Tested on x64 Ubuntu Lucid, native only.
gdb/ChangeLog:
* infrun.c (follow_fork_inferior): Update fork message printing
to use target_terminal_ours_for_output instead of
target_terminal_ours, to use _() for all format strings, to print
"vfork" instead of "fork" for vforks, and to add a detach message.
(handle_vfork_child_exec_or_exit): Update message printing to use
target_terminal_ours_for_output instead of target_terminal_ours, to
use _() for all format strings, and to fix some formatting.
gdb/testsuite/ChangeLog:
* gdb.base/foll-fork.exp (test_follow_fork,
catch_fork_child_follow): Check for updated fork messages emitted
from infrun.c.
* gdb.base/foll-vfork.exp (vfork_parent_follow_through_step,
vfork_parent_follow_to_bp, vfork_and_exec_child_follow_to_main_bp,
vfork_and_exec_child_follow_through_step): Check for updated vfork
messages emitted from infrun.c.
gdb/ChangeLog:
* gnu-v3-abi.c (gnuv3_pass_by_reference): Call TYPE_TARGET_TYPE
on the arg type of a constructor only if it is of reference type.
gdb/testsuite/ChangeLog:
* gdb.cp/non-trivial-retval.cc: Add a test case.
* gdb.cp/non-trivial-retval.exp: Add a test.
Patch <https://sourceware.org/ml/gdb-patches/2011-07/msg00225.html> was
to fix the problem that py-objfile-script-gdb.py is removed after an
in-tree build and test. As a result of the previous patch (we don't
remove files copied to host any more), this patch is no longer needed.
This patch is to revert it logically.
gdb/testsuite:
2014-10-20 Yao Qi <yao@codesourcery.com>
* gdb.python/py-objfile-script-gdb.py.in: Rename it to ...
* gdb.python/py-objfile-script-gdb.py: New file.
* gdb.python/py-objfile-script.exp: Update reference to
py-objfile-script-gdb.py.in. Use gdb_remote_donwload instead
of remote_download. Remove the dest file.
Nowadays, if we do in-tree build and run tests sequentially, some source
files are removed, due to the following pattern:
set pi_txt [gdb_remote_download host ${srcdir}/${subdir}/pi.txt]
remote_exec host "rm -f $pi_txt"
If testing is run sequentially, file ${srcdir}/${subdir}/pi.txt is
copied to ${objdir}/${subdir}/pi.txt. However, ${objdir} is ${srcdir}
in the in-tree build/test, so the file is coped to itself, as a nop.
As a result, the file in source is removed at the end of test.
This patch fixes this problem by not removing files copied to host in
each test. This patch also addresses the question we've had that why
don't we keep files copied to host because they are needed to reproduce
certain fails.
gdb/testsuite:
2014-10-20 Yao Qi <yao@codesourcery.com>
* gdb.base/checkpoint.exp: Don't remove file copied on host.
* gdb.base/step-line.exp: Likewise.
* gdb.dwarf2/dw2-anonymous-func.exp: Likewise.
* gdb.dwarf2/dw2-basic.exp: Likewise.
* gdb.dwarf2/dw2-compressed.exp: Likewise.
* gdb.dwarf2/dw2-filename.exp: Likewise.
* gdb.dwarf2/dw2-intercu.exp: Likewise.
* gdb.dwarf2/dw2-intermix.exp: Likewise.
* gdb.dwarf2/dw2-producer.exp: Likewise.
* gdb.dwarf2/mac-fileno.exp: Likewise.
* gdb.python/py-frame-args.exp: Likewise.
* gdb.python/py-framefilter.exp: Likewise.
* gdb.python/py-mi.exp: Likewise.
* gdb.python/py-objfile-script.exp: Likewise
* gdb.python/py-pp-integral.exp: Likewise.
* gdb.python/py-pp-re-notag.exp: Likewise.
* gdb.python/py-prettyprint.exp: Likewise.
* gdb.python/py-section-script.exp: Likewise.
* gdb.python/py-typeprint.exp: Likewise.
* gdb.python/py-xmethods.exp: Likewise.
* gdb.stabs/weird.exp: Likewise.
* gdb.xml/tdesc-regs.exp: Likewise.
This patch fixes the failures that occur with the
gdb.dwarf2/dw2-dir-file-name.exp test on 64-bit MIPS and compressed
MIPS ISAs (i.e. MIPS16 and microMIPS).
The failures on 64-bit occur because the generated DWARF address
information is always 32-bit, which causes the upper 32-bits of
addresses to be truncated and causes breakpoints to be set on the
wrong address if any of the upper 32-bits are non-zero. I suspect
that other 64-bit architectures get away with it because they
place all their instructions at a VMA lower than 2^32 by default.
This patch causes 64-bit addresses to be generated if a 64-bit
target is detected.
The failures on MIPS16 and microMIPS occur because the breakpoint
address needs to have the LSB set to 1 (used to indicate that the
code is compressed). However, the function name is interpreted as
a data label, causing GDB to set breakpoints at even addresses.
This is fixed by explicitly adding a '.insn' directive (see
https://sourceware.org/binutils/docs/as/MIPS-insn.html) after the
label on MIPS only.
gdb/testsuite/
2014-10-18 Kwok Cheung Yeung <kcy@codesourcery.com>
* gdb.dwarf2/dw2-dir-file-name.exp (addr_len): New.
(out_cu): Use addr_len for the size of addresses.
(out_line): Likewise. Size DW_LNE_set_address instruction
according to addr_len.
* gdb.dwarf2/dw2-dir-file-name.c (START_INSNS): New.
(FUNC): Add START_INSNS to definition.
I see the following two fails on arm-none-eabi target, because argv[0]
isn't available.
print argv[0]^M
$1 = 0x1f78 "/dev/null"^M
(gdb) FAIL: gdb.base/argv0-symlink.exp: kept file symbolic link name
print argv[0]^M
$1 = 0x1f78 "/dev/null"^M
(gdb) FAIL: gdb.base/argv0-symlink.exp: kept directory symbolic link name
My first thought is to check [target_info exists noargs], and skip the
test if it returns true. However, noargs is set in gdbserver board
files, so argv0-symlink.exp will be skipped on gdbserver board file.
The change is too aggressive.
When the program is running with gdbserver, argv[1] to argv[N] aren't
available, but argv[0] is. Fortunately, argv0-symlink.exp only
requires argv[0]. argv0-symlink.exp can be run with gdbserver board
file, as what we do now.
What we need to check is whether argv[0] is available, so I add a new
proc gdb_has_argv0 to do so by starting a program, and check
argc/argv[0] to see whether argv[0] is available.
Dan fixed the similar problem by checking noargs, which is too strong.
https://sourceware.org/ml/gdb-patches/2010-02/msg00398.html as a
result, the test is skipped on gdbserver. This patch fixed it too.
gdb/testsuite:
2014-10-18 Yao Qi <yao@codesourcery.com>
* gdb.base/argv0-symlink.exp: Check argv[0] value if
gdb_has_argv0 return true.
* gdb.guile/scm-value.exp (test_value_in_inferior): Don't
check [target_info exists noargs], check [gdb_has_argv0]
instead.
* gdb.python/py-value.exp (test_value_in_inferior): Likewise.
* lib/gdb.exp (gdb_has_argv0, gdb_has_argv0_1): New
procedures.
If one is watching new_objfile events in python, it helps to know
when the list of objfiles is cleared. This patch adds a new
clear_objfiles event to support this.
This patch is all just cut-n-paste-n-tweak derived from
the new_objfiles event.
gdb/ChangeLog:
* NEWS: Mention new event gdb.clear_objfiles.
* python/py-event.h (emit_clear_objfiles_event): Clear
* python/py-events.h (events_object): New member clear_objfiles.
* python/py-evts.c (gdbpy_initialize_py_events): Add clear_objfiles
event.
* python/py-inferior.c (python_new_objfile): If objfile is NULL,
emit clear_objfiles event.
* python/py-newobjfileevent.c (create_clear_objfiles_event_object): New
function.
(emit_clear_objfiles_event): New function.
(clear_objfiles): New event.
* python/python-internal.h (gdbpy_initialize_clear_objfiles_event):
Declare.
* python/python.c (_initialize_python): Call
gdbpy_initialize_clear_objfiles_event.
gdb/doc/ChangeLog:
* python.texi (Events In Python): Document clear_objfiles event.
gdb/testsuite/ChangeLog:
* gdb.python/py-events.exp: Update expected output for clear_objfiles
event.
* gdb.python/py-events.py: Add clear_objfiles event.
gdb/ChangeLog:
* NEWS: Mention new gdb.Objfile.progspace attribute.
* python/py-objfile.c (objfpy_get_progspace): New function.
(objfile_getset): New entry for "progspace".
gdb/doc/ChangeLog:
* python.texi (Objfiles In Python): Document new progspace attribute.
gdb/testsuite/ChangeLog:
* gdb.python/py-objfile.exp: Test progspace attribute.
Some testcases, mostly gdb.reverse ones, assume the presence of a
'/' directory separator before the source file name. This is
incorrect for mingw32 hosts, generating false failures for those
tests.
I attempted to catch most of the occurrences of the pattern
".*/$srcfile" and replaced them with ".*$srcfile". The latter
is used elsewhere in the testsuite. The resulting patch is attached.
I also see other occurrences of the same assumption throughout the
testsuite, but usually they are arguments for function calls and i
seem to recall either the test harness or GDB deals with those
paths properly.
gdb/testsuite:
2014-10-17 Luis Machado <lgustavo@codesourcery.com>
* gdb.guile/scm-breakpoint.exp: Do not assume any
directory separators when matching source file paths.
* gdb.python/py-breakpoint.exp: Likewise.
* gdb.reverse/break-precsave.exp: Likewise.
* gdb.reverse/break-reverse.exp: Likewise.
* gdb.reverse/consecutive-precsave.exp: Likewise.
* gdb.reverse/finish-precsave.exp: Likewise.
* gdb.reverse/finish-reverse-bkpt.exp: Likewise.
* gdb.reverse/finish-reverse.exp: Likewise.
* gdb.reverse/i386-precsave.exp: Likewise.
* gdb.reverse/i387-env-reverse.exp: Likewise.
* gdb.reverse/i387-stack-reverse.exp: Likewise.
* gdb.reverse/machinestate-precsave.exp: Likewise.
* gdb.reverse/machinestate.exp: Likewise.
* gdb.reverse/sigall-precsave.exp: Likewise.
* gdb.reverse/solib-precsave.exp: Likewise.
* gdb.reverse/step-precsave.exp: Likewise.
* gdb.reverse/until-precsave.exp: Likewise.
* gdb.reverse/watch-precsave.exp: Likewise.
* gdb.reverse/watch-reverse.exp: Likewise.
When I run test with board file local-remote-host-native.exp, I see
the following warning,
$ make check RUNTESTFLAGS="--host_board=local-remote-host-native
--target_board=local-remote-host-native tdesc-arch.exp
HOST_DIR=/tmp/foo/"
(gdb) set tdesc filename ../../../../git/gdb/testsuite/gdb.xml/trivial.xml^M
warning: Could not open "../../../../git/gdb/testsuite/gdb.xml/trivial.xml"
(gdb) quit^
because "${srcdir}/gdb.xml/trivial.xml" doesn't exist on host. This
patch is to copy trivial.xml to host and the warning goes away.
(gdb) set tdesc filename /tmp/foo/trivial.xml^M
(gdb) quit^
tdesc-regs.exp has the similar problem that single-reg.xml may not
exist on host at all, and it should be copied to host too.
gdb/testsuite:
2014-10-17 Yao Qi <yao@codesourcery.com>
* lib/gdb.exp (gdb_skip_xml_test): Copy trivial.xml to host.
* gdb.xml/tdesc-regs.exp: Copy single-reg.xml to host.
When we repeat a command, by just pressing <ret>, the input from the
previous command is reused for the new command invocation.
When an execution command strips the "&" out of its incoming argument
string, to detect background execution, we poke a '\0' directly to the
incoming argument string.
Combine both, and a repeat of a background command loses the "&".
This is actually only visible if args other than "&" are specified
(e.g., "c 1&" or "next 2&" or "c -a&"), as in the special case of "&"
alone (e.g. "c&") doesn't actually clobber the incoming string.
Fix this by making strip_bg_char return a new string instead of poking
a hole in the input string.
New test included.
Tested on x86_64 Fedora 20, native and gdbserver.
gdb/
2014-10-17 Pedro Alves <palves@redhat.com>
PR gdb/17471
* infcmd.c (strip_bg_char): Change prototype and rewrite. Now
returns a copy of the input.
(run_command_1, continue_command, step_1, jump_command)
(signal_command, until_command, advance_command, finish_command)
(attach_command): Adjust and install a cleanup to free the
stripped args.
gdb/testsuite/
2014-10-17 Pedro Alves <palves@redhat.com>
PR gdb/17471
* gdb.base/bg-execution-repeat.c: New file.
* gdb.base/bg-execution-repeat.exp: New file.
If all threads in the target were already running when the user does
"c -a", nothing puts the inferior's terminal settings in effect and
removes stdin from the event loop, which we must when running a
foreground command. The result is that user input afterwards crashes
readline/gdb:
(gdb) start
Temporary breakpoint 1 at 0x4005d4: file continue-all-already-running.c, line 23.
Starting program: continue-all-already-running
Temporary breakpoint 1, main () at continue-all-already-running.c:23
23 sleep (10);
(gdb) c -a&
Continuing.
(gdb) c -a
Continuing.
p 1
readline: readline_callback_read_char() called with no handler!
Aborted (core dumped)
$
Backtrace:
Program received signal SIGABRT, Aborted.
0x0000003b36a35877 in __GI_raise (sig=sig@entry=6) at ../nptl/sysdeps/unix/sysv/linux/raise.c:56
56 return INLINE_SYSCALL (tgkill, 3, pid, selftid, sig);
(top-gdb) p 1
$1 = 1
(top-gdb) bt
#0 0x0000003b36a35877 in __GI_raise (sig=sig@entry=6) at ../nptl/sysdeps/unix/sysv/linux/raise.c:56
#1 0x0000003b36a36f68 in __GI_abort () at abort.c:89
#2 0x0000000000784aa9 in rl_callback_read_char () at readline/callback.c:116
#3 0x0000000000619181 in rl_callback_read_char_wrapper (client_data=0x0) at gdb/event-top.c:167
#4 0x0000000000619557 in stdin_event_handler (error=0, client_data=0x0) at gdb/event-top.c:373
#5 0x000000000061814a in handle_file_event (data=...) at gdb/event-loop.c:763
#6 0x0000000000617631 in process_event () at gdb/event-loop.c:340
#7 0x00000000006176f8 in gdb_do_one_event () at gdb/event-loop.c:404
#8 0x0000000000617748 in start_event_loop () at gdb/event-loop.c:429
#9 0x00000000006191b3 in cli_command_loop (data=0x0) at gdb/event-top.c:182
#10 0x000000000060f538 in current_interp_command_loop () at gdb/interps.c:318
#11 0x0000000000610701 in captured_command_loop (data=0x0) at gdb/main.c:323
#12 0x000000000060c3f5 in catch_errors (func=0x6106e6 <captured_command_loop>, func_args=0x0, errstring=0x9002c1 "", mask=RETURN_MASK_ALL)
at gdb/exceptions.c:237
#13 0x0000000000611bff in captured_main (data=0x7fffffffd780) at gdb/main.c:1151
#14 0x000000000060c3f5 in catch_errors (func=0x610afe <captured_main>, func_args=0x7fffffffd780, errstring=0x9002c1 "", mask=RETURN_MASK_ALL)
at gdb/exceptions.c:237
#15 0x0000000000611c28 in gdb_main (args=0x7fffffffd780) at gdb/main.c:1159
#16 0x000000000045ef97 in main (argc=5, argv=0x7fffffffd888) at gdb/gdb.c:32
(top-gdb)
Tested on x86_64 Fedora 20, native and gdbserver.
gdb/
2014-10-17 Pedro Alves <palves@redhat.com>
PR gdb/17300
* infcmd.c (continue_1): If continuing all threads in the
foreground, make sure the inferior's terminal settings are put in
effect.
gdb/testsuite/
2014-10-17 Pedro Alves <palves@redhat.com>
PR gdb/17300
* gdb.base/continue-all-already-running.c: New file.
* gdb.base/continue-all-already-running.exp: New file.
Jan caught an intermittent GDB crash with the annota1.exp test:
Starting program: .../gdb/testsuite/gdb.base/annota1 ^M
[...]
FAIL: gdb.base/annota1.exp: run until main breakpoint (timeout)
[...]
readline: readline_callback_read_char() called with no handler!^M
ERROR: Process no longer exists
All we need to is to continue the inferior in the foreground, and type
a command while the inferior is running. E.g.:
(gdb) set annotate 2
▒▒pre-prompt
(gdb)
▒▒prompt
c
▒▒post-prompt
Continuing.
▒▒starting
▒▒frames-invalid
*inferior is running now*
p 1<ret>
readline: readline_callback_read_char() called with no handler!
Aborted (core dumped)
$
When we run a foreground execution command we call
target_terminal_inferior to stop GDB from processing input, and to put
the inferior's terminal settings in effect. Then we tell readline to
hide the prompt with display_gdb_prompt, which clears readline's input
callback too. When the target stops, we call target_terminal_ours,
which re-installs stdin in the event loop, and then we redisplay the
prompt, reinstalling the readline callbacks.
However, when annotations are in effect, the "frames-invalid"
annotation code calls target_terminal_ours after 'resume' had already
called target_terminal_inferior:
(top-gdb) bt
#0 0x000000000056b82f in annotate_frames_invalid () at gdb/annotate.c:219
#1 0x000000000072e6cc in reinit_frame_cache () at gdb/frame.c:1705
#2 0x0000000000594bb9 in registers_changed_ptid (ptid=...) at gdb/regcache.c:612
#3 0x000000000064cca1 in target_resume (ptid=..., step=1, signal=GDB_SIGNAL_0) at gdb/target.c:2136
#4 0x00000000005f57af in resume (step=1, sig=GDB_SIGNAL_0) at gdb/infrun.c:2263
#5 0x00000000005f6051 in proceed (addr=18446744073709551615, siggnal=GDB_SIGNAL_DEFAULT, step=1) at gdb/infrun.c:2613
And then once we hide the prompt and remove readline's input handler
callback, we're in a bad state. We end up with the target running
supposedly in the foreground, but with stdin still installed on the
event loop. Any input then calls into readline, which aborts because
no rl_linefunc callback handler is installed:
Program received signal SIGABRT, Aborted.
0x0000003b36a35877 in __GI_raise (sig=sig@entry=6) at ../nptl/sysdeps/unix/sysv/linux/raise.c:56
56 return INLINE_SYSCALL (tgkill, 3, pid, selftid, sig);
(top-gdb) bt
#0 0x0000003b36a35877 in __GI_raise (sig=sig@entry=6) at ../nptl/sysdeps/unix/sysv/linux/raise.c:56
#1 0x0000003b36a36f68 in __GI_abort () at abort.c:89
During symbol reading, debug info gives source 9 included from file at zero line 0.
During symbol reading, debug info gives command-line macro definition with non-zero line 19: _STDC_PREDEF_H 1.
#2 0x0000000000784a25 in rl_callback_read_char () at src/readline/callback.c:116
#3 0x0000000000619111 in rl_callback_read_char_wrapper (client_data=0x0) at src/gdb/event-top.c:167
#4 0x00000000006194e7 in stdin_event_handler (error=0, client_data=0x0) at src/gdb/event-top.c:373
#5 0x00000000006180da in handle_file_event (data=...) at src/gdb/event-loop.c:763
#6 0x00000000006175c1 in process_event () at src/gdb/event-loop.c:340
#7 0x0000000000617688 in gdb_do_one_event () at src/gdb/event-loop.c:404
#8 0x00000000006176d8 in start_event_loop () at src/gdb/event-loop.c:429
#9 0x0000000000619143 in cli_command_loop (data=0x0) at src/gdb/event-top.c:182
#10 0x000000000060f4c8 in current_interp_command_loop () at src/gdb/interps.c:318
#11 0x0000000000610691 in captured_command_loop (data=0x0) at src/gdb/main.c:323
#12 0x000000000060c385 in catch_errors (func=0x610676 <captured_command_loop>, func_args=0x0, errstring=0x900241 "", mask=RETURN_MASK_ALL)
at src/gdb/exceptions.c:237
#13 0x0000000000611b8f in captured_main (data=0x7fffffffd7b0) at src/gdb/main.c:1151
#14 0x000000000060c385 in catch_errors (func=0x610a8e <captured_main>, func_args=0x7fffffffd7b0, errstring=0x900241 "", mask=RETURN_MASK_ALL)
at src/gdb/exceptions.c:237
#15 0x0000000000611bb8 in gdb_main (args=0x7fffffffd7b0) at src/gdb/main.c:1159
#16 0x000000000045ef57 in main (argc=3, argv=0x7fffffffd8b8) at src/gdb/gdb.c:32
The fix is to make the annotation code call target_terminal_inferior
again after printing, if the inferior's settings were in effect.
While at it, when we're doing output only, instead of
target_terminal_ours, we should call target_terminal_ours_for_output.
The latter doesn't actually remove stdin from the event loop, and also
leaves SIGINT forwarded to the target.
New test included.
Tested on x86_64 Fedora 20, native and gdbserver.
gdb/
2014-10-17 Pedro Alves <palves@redhat.com>
PR gdb/17472
* annotate.c (annotate_breakpoints_invalid): Use
target_terminal_our_for_output instead of target_terminal_ours.
Give back the terminal to the target.
(annotate_frames_invalid): Likewise.
gdb/testsuite/
2014-10-17 Pedro Alves <palves@redhat.com>
PR gdb/17472
* gdb.base/annota-input-while-running.c: New file.
* gdb.base/annota-input-while-running.exp: New file.
This commit does most of the mechanical removal. IOW, the easy part.
procfs.c isn't touched beyond removing a couple obvious bits that are
guarded by a couple macros defined in config/alpha/nm-osf3.h. Going
beyond that for procfs.c & co would be a harder excision that
potentially affects Solaris.
Some comments in the generic alpha code ABIs that may still be
relevant and I wouldn't know what to do with them. That can always be
done on a separate pass, preferably by someone who can test on alpha.
A couple other spots have references to OSF/Tru64 and related files
being removed, but it felt like removing them would make things worse,
not better. We can revisit those when we next need to touch that
code.
I didn't remove a reference to osf in testsuite/lib/future.exp, as I
believe that code is imported from DejaGNU.
Built and tested on x86_64 Fedora 20, with --enable-targets=all.
Tested that building for --target=alpha-osf3 on x86_64 Fedora 20
fails with:
checking for default auto-load directory... $debugdir:$datadir/auto-load
checking for default auto-load safe-path... $debugdir:$datadir/auto-load
*** Configuration alpha-unknown-osf3 is obsolete.
*** Support has been REMOVED.
make[1]: *** [configure-gdb] Error 1
make[1]: Leaving directory `build-osf'
make: *** [all] Error 2
gdb/
2014-10-17 Pedro Alves <palves@redhat.com>
* Makefile.in (ALL_64_TARGET_OBS): Remove alpha-osf1-tdep.o.
(HFILES_NO_SRCDIR): Remove config/alpha/nm-osf3.h.
(ALLDEPFILES): Remove alpha-nat.c, alpha-osf1-tdep.c and
solib-osf.c.
* NEWS: Mention that support for alpha*-*-osf* has been removed.
* ada-lang.h [__alpha__ && __osf__]
(ADA_KNOWN_RUNTIME_FILE_NAME_PATTERNS): Delete.
* alpha-nat.c, alpha-osf1-tdep.c: Delete files.
* alpha-tdep.c (alpha_gdbarch_init): Remove reference to
GDB_OSABI_OSF1.
* config/alpha/alpha-osf3.mh, config/alpha/nm-osf3.h: Delete
files.
* config/djgpp/fnchange.lst (config/alpha/alpha-osf1.mh)
(config/alpha/alpha-osf2.mh, config/alpha/alpha-osf3.mh): Delete.
* configure: Regenerate.
* configure.ac: Remove references to osf.
* configure.host: Handle alpha*-*-osf* in the obsolete hosts
section. Remove all other references to osf.
* configure.tgt: Add alpha*-*-osf* to the obsolete targets section.
Remove all other references to osf.
* dec-thread.c: Delete file.
* defs.h (GDB_OSABI_OSF1): Delete.
* inferior.h (START_INFERIOR_TRAPS_EXPECTED): New unconditionally
defined.
* osabi.c (gdb_osabi_names): Delete "OSF/1".
* procfs.c (procfs_debug_inferior) [PROCFS_DONT_TRACE_FAULTS]:
Delete code.
(unconditionally_kill_inferior)
[PROCFS_NEED_CLEAR_CURSIG_FOR_KILL]: Delete code.
* solib-osf.c: Delete file.
gdb/testsuite/
2014-10-17 Pedro Alves <palves@redhat.com>
* gdb.base/callfuncs.exp: emove references to osf.
* gdb.base/sigall.exp: Likewise.
* gdb.gdb/selftest.exp: Likewise.
* gdb.hp/gdb.base-hp/callfwmall.exp: Likewise.
* gdb.mi/non-stop.c: Likewise.
* gdb.mi/pthreads.c: Likewise.
* gdb.reverse/sigall-precsave.exp: Likewise.
* gdb.reverse/sigall-reverse.exp: Likewise.
* gdb.threads/pthreads.c: Likewise.
* gdb.threads/pthreads.exp: Likewise.
gdb/doc/
2014-10-17 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Ada Tasks and Core Files): Delete mention of Tru64.
(SVR4 Process Information): Delete mention of OSF/1.
I am confused by the noargs checking at each proc in commands.exp,
if [target_info exists noargs] {
verbose "Skipping progvar_simple_while_test because of noargs."
return
}
gdb_test_no_output "set args 5" "set args in progvar_simple_while_test"
if { ![runto factorial] } then { gdb_suppress_tests }
# Don't depend upon argument passing, since most simulators don't
# currently support it. Bash value variable to be what we want.
gdb_test "p value=5" ".*" "set value to 5 in progvar_simple_if_test #2"
They are conflicting to me. If the argument passing can't be done on
the target, we skip this test, why do we still have to set value below?
On the other hand, the test case is compiled with -DFAKEARGV, it doesn't
get anything from argv[1], why do we need to skip it if noargs is true?
I don't find any useful clues from the git log, as the code is quite
old, predating import to sourceware cvs. However, I find something
useful from the ChangeLog.
Thu Jul 20 13:28:36 1995 Jeffrey A. Law <law@rtl.cygnus.com>
.....
* gdb.base/commands.exp: Protect tests which need arguments with
$noargs conditionals.
Mon Apr 21 13:38:58 1997 Fred Fish <fnf@cygnus.com>
* gdb.base/run.c: Use FAKEARGV to build test executable that
does not require a command line arg, since most simulators
don't currently support passing such an arg into the simulated
program.
* gdb.base/commands.exp: Change tests to insert the proper
value as the arg to the first recursive factorial call. Change
compilation line to define FAKEARGV at compile time.
Jeff added noargs checking as argument is passed to the inferior. Then,
I presume Fred wanted to run this test on simulators which don't support
argument passing, and change the code not get input from argv. (I guess)
noargs wasn't set in simulator board files at that moment.
Since Fred changed test to set input by gdb, instead of getting input
from argv, the test should be able to run on target doesn't support
argument passing, such as simulator and gdbserver.
This patch is to remove these checks to noargs and "set args". I run
commands.exp with these board files, and no fail is found
- unix and native-gdbserver
- arm-none-eabi with qemu
- gdbserver on arm-linux-gnueabi with qemu
gdb/testsuite:
2014-10-17 Yao Qi <yao@codesourcery.com>
* gdb.base/commands.exp (gdbvar_complex_if_while_test): Don't check
'target_info exists noargs'.
(test_command_prompt_position): Likewise.
(progvar_simple_if_test): Don't check 'target_info exists noargs'.
Remove "set args".
(progvar_simple_while_test): Likewise.
(progvar_complex_if_while_test): Likewise.
(if_while_breakpoint_command_test): Likewise.
(infrun_breakpoint_command_test): Likewise.
(breakpoint_command_test): Likewise.
(watchpoint_command_test): Likewise.
(bp_deleted_in_command_test): Likewise.
(temporary_breakpoint_commands): Likewise.
The condition [target_info exists noargs] is checked when
remotetimeout.exp was added
https://sourceware.org/ml/gdb-patches/2005-02/msg00052.html
noargs means GDB does not support argument passing for inferior,
rather than doesn't support argument passing to GDB. remotetimeout.exp
passes -l to GDB only, doesn't pass any arguments to the inferior.
This patch is to remove such unnecessary checking, and
remotetimeout.exp then can be run with native-gdbserver board file.
gdb/testsuite:
2014-10-16 Yao Qi <yao@codesourcery.com>
* gdb.base/remotetimeout.exp: Remove noargs checking.
This patch makes single-step breakpoints "real" breakpoints on the
global location list.
There are several benefits to this:
- It removes the currently limitation that only 2 single-step
breakpoints can be inserted. See an example here of a discussion
around a case that wants more than 2, possibly unbounded:
https://sourceware.org/ml/gdb-patches/2014-03/msg00663.html
- makes software single-step work on read-only code regions.
The logic to convert a software breakpoint to a hardware breakpoint
if the memory map says the breakpoint address is in read only memory
is in insert_bp_location. Because software single-step breakpoints
bypass all that go and straight to target_insert_breakpoint, we
can't software single-step over read only memory. This patch
removes that limitation, and adds a test that makes sure that works,
by forcing a code region to read-only with "mem LOW HIGH ro" and
then stepping through that.
- Fixes PR breakpoints/9649
This is an assertion failure in insert_single_step_breakpoint in
breakpoint.c, because we may leave stale single-step breakpoints
behind on error.
The tests for stepping through read-only regions exercise the root
cause of the bug, which is that we leave single-step breakpoints
behind if we fail to insert any single-step breakpoint. Deleting
the single-step breakpoints in resume_cleanups,
delete_just_stopped_threads_infrun_breakpoints, and
fetch_inferior_event fixes this. Without that, we'd no longer hit
the assertion, as that code is deleted, but we'd instead run into
errors/warnings trying to insert/remove the stale breakpoints on
next resume.
- Paves the way to have multiple threads software single-stepping at
the same time, leaving update_global_location_list to worry about
duplicate locations.
- Makes the moribund location machinery aware of software single-step
breakpoints, paving the way to enable software single-step on
non-stop, instead of forcing serialized displaced stepping for all
single steps.
- It's generaly cleaner.
We no longer have to play games with single-step breakpoints
inserted at the same address as regular breakpoints, like we
recently had to do for 7.8. See this discussion:
https://sourceware.org/ml/gdb-patches/2014-06/msg00052.html.
Tested on x86_64 Fedora 20, on top of my 'single-step breakpoints on
x86' series.
gdb/
2014-10-15 Pedro Alves <palves@redhat.com>
PR breakpoints/9649
* breakpoint.c (single_step_breakpoints, single_step_gdbarch):
Delete array globals.
(single_step_breakpoints): New global.
(breakpoint_xfer_memory): Remove special handling for single-step
breakpoints.
(update_breakpoints_after_exec): Delete bp_single_step
breakpoints.
(detach_breakpoints): Remove special handling for single-step
breakpoints.
(breakpoint_init_inferior): Delete bp_single_step breakpoints.
(bpstat_stop_status): Add comment.
(bpstat_what, bptype_string, print_one_breakpoint_location)
(adjust_breakpoint_address, init_bp_location): Handle
bp_single_step.
(new_single_step_breakpoint): New function.
(set_momentary_breakpoint, bkpt_remove_location): Remove special
handling for single-step breakpoints.
(insert_single_step_breakpoint, single_step_breakpoints_inserted)
(remove_single_step_breakpoints, cancel_single_step_breakpoints):
Rewrite.
(detach_single_step_breakpoints, find_single_step_breakpoint):
Delete functions.
(breakpoint_has_location_inserted_here): New function.
(single_step_breakpoint_inserted_here_p): Rewrite.
* breakpoint.h: Remove FIXME.
(enum bptype) <bp_single_step>: New enum value.
(insert_single_step_breakpoint): Update comment.
* infrun.c (resume_cleanups)
(delete_step_thread_step_resume_breakpoint): Remove single-step
breakpoints.
(fetch_inferior_event): Install a cleanup that removes infrun
breakpoints.
(switch_back_to_stepped_thread) <expect thread advanced also>:
Clear step-over info.
gdb/testsuite/
2014-10-15 Pedro Alves <palves@redhat.com>
PR breakpoints/9649
* gdb.base/breakpoint-in-ro-region.c (main): Add more instructions.
* gdb.base/breakpoint-in-ro-region.exp
(probe_target_hardware_step): New procedure.
(top level): Probe hardware stepping and hardware breakpoint
support. Test stepping through a read-only region, with both
"breakpoint auto-hw" on and off and both "always-inserted" on and
off.
Test gdb.python/py-parameter.exp expects output "$srcdir/$subdir:\$cdir:\$cwd",
but proc gdb_reinitialize_dir doesn't set $srcdir/$subdir in search
directories on remote host because it doesn't exist on remote host.
proc gdb_reinitialize_dir { subdir } {
global gdb_prompt
if [is_remote host] {
return ""
}
It causes the fail below:
(gdb) python print (gdb.parameter ('directories'))^M
/tmp/gdb:$cdir:$cwd^M
(gdb) FAIL: gdb.python/py-parameter.exp: python print (gdb.parameter ('directories'))
This patch is to fix this fail by not matching $srcdir/$subdir on remote host.
gdb/testsuite:
2014-10-15 Yao Qi <yao@codesourcery.com>
* gdb.python/py-parameter.exp: Don't match $srcdir/$subdir on
remote host.
I see the following fails in the remote host testing we do for mingw32
hosted GDB,
python print (symtab[1][0].symtab)^M
python.c^M
(gdb) FAIL: gdb.python/python.exp: Test decode_line current locationn filename
python print (symtab[1][0].symtab)^M
python.c^M
(gdb) FAIL: gdb.python/python.exp: Test decode_line python.c:26 filename
The test cases doesn't consider remote host and assumes that directory
on build also exists on host. In this patch, we only match file base
name if host is remote, otherwise, match file with dir name.
gdb/testsuite:
2014-10-15 Yao Qi <yao@codesourcery.com>
* gdb.python/py-symbol.exp: Match file base name if host is
remote, otherwise match file name with dir name.
* gdb.python/py-symtab.exp: Likewise.
* gdb.python/python.exp: Likewise.
This patch is to clean up various gdb.python/*.exp tests, such as
removing trailing ".*" from the pattern and fix one typo I find during
reading the code.
gdb/testsuite:
2014-10-15 Yao Qi <yao@codesourcery.com>
* gdb.python/python.exp: Remove trailing ".*". Fix typo
locationn.
* gdb.python/py-symbol.exp: Remove trailing ".*" in the
pattern.
* gdb.python/py-symtab.exp: Likewise.
When trying to evaluate an expression which adds a pointer and
an integral, the evaluation succeeds if the pointer is on
the left handside of the operator, but not when it is on the right
handside:
(gdb) p something'address + 0
$1 = (system.address) 0x613418 <pck.something>
(gdb) p 0 + something'address
Argument to arithmetic operation not a number or boolean.
Same issue when doing subtractions:
(gdb) p something'address - 0
$2 = (system.address) 0x613418 <pck.something>
(gdb) p 0 - something'address
Argument to arithmetic operation not a number or boolean.
This patch enhances the Ada expression evaluator to handle
these two situations.
gdb/ChangeLog:
* ada-lang.c (ada_evaluate_subexp) <BINOP_ADD>: Add handling
of the case where the second operand is a pointer.
<BINOP_SUB>: Likewise.
gdb/testsuite/ChangeLog:
* gdb.ada/addr_arith: New testcase.
Tested on x86_64-linux.
Joel contacted me offlist with a question about a warning that one of
his customers was seeing. The message came from the new
linker-debugger interface, which uses SDT probes internally. The
warning said:
(gdb) run
[...]
warning: Probes-based dynamic linker interface failed.
Reverting to original interface.
Argument to arithmetic operation not a number or boolean.
This should not have happened in the environment the customer was
using (RHEL-6.x), so I found it strange. Another thing caught my
attention: the last message, saying "Argument to arithmetic operation
not a number or boolean.".
Joel kindly investigated the issue further, and found the answer for
this. To quote him:
(gdb) set lang c
(gdb) p 48+$ebp
$4 = (void *) 0xffffd0f8
So far so good. But...
(gdb) set lang ada
(gdb) p 48+$ebp
Argument to arithmetic operation not a number or boolean.
Ooops! Interestingly, if you revert the order of the operands...
(gdb) p $ebp+48
$5 = (access void) 0xffffd0f8
So the problem is doing pointer arithmetics when the language is set
to Ada.
I remembered that, during the parsing and the evaluation of SDT probe
arguments, the code sets the language as current_language, because, at
that time, I thought it was not necessary to worry about the language
given that the code implements its own parser. I was wrong. So here
is a patch to fix that, by setting the language as C, which should
guarantee that the maths are done in the right way (TM).
It was somewhat hard to find a reproducer for this issue. In the end,
what I had to do was to create a testcase that used the %ebp register
on some displacement (e.g., "-4(%ebp)"), which finally triggered the
bug. I am not sure why I could not trigger it when using other
registers, but I did not want to spend too much time investigating
this issue, which seemed like an Ada issue. Also, because of this
peculiar way to trigger the problem, the testcase only covers x86-like
targets (i.e., i*86 and x86_64 with -m32).
Joel kindly tested this for me, and it worked. I also ran a full
regression test here on my Fedora 20 x86_64, and everything is fine.
I will push this patch in a few days if there are no comments.
gdb/ChangeLog:
2014-10-14 Sergio Durigan Junior <sergiodj@redhat.com>
* stap-probe.c (stap_parse_argument): Initialize expout explicitly
using language_c, instead of current_language.
gdb/testsuite/ChangeLog:
2014-10-14 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.arch/stap-eval-lang-ada.S: Likewise.
* gdb.arch/stap-eval-lang-ada.c: Likewise.
* gdb.arch/stap-eval-lang-ada.exp: New file.
Hi,
I see the following fails on arm-none-eabi target,
-var-list-children --simple-values struct_declarations ^M
^done,numchild="11",children=[...,child={name="struct_declarations.func_ptr_struct",exp="func_ptr_struct",numchild="0",value="0x0 <_ftext>",type="struct _struct_decl (*)(int, char *, long)",thread-id="1"},child={name="struct_declarations.func_ptr_ptr",exp="func_ptr_ptr",numchild="0",value="0x0 <_ftext>",type="struct _struct_decl *(*)(int, char *, long)",thread-id="1"},...
(gdb) ^M
FAIL: gdb.mi/mi-var-child.exp: listing of children, simple types: names, type and values, complex types: names and types
-var-set-format weird.func_ptr_ptr natural^M
^done,format="natural",value="0x0 <_ftext>"^M
(gdb) ^M
FAIL: gdb.mi/mi-var-display.exp: set format variable weird.func_ptr_ptr in natural
In the test, "0x0" is expected, but "0x0 <_ftext>" is in the output.
Function pointers point to address zero, and tests assume there is no
symbol on address zero. However, on my arm-none-eabi target, there is
a code symbol _ftext on address zero, and test fails. Note that "set
print symbol off" doesn't take effect for function pointer.
int (*f) (void);
f = main;
(gdb) p f
$1 = (int (*)(void)) 0x8048400 <main>
(gdb) set print symbol off
(gdb) p f
$2 = (int (*)(void)) 0x8048400 <main>
In order to erase the difference, we can assign some function address
explicitly to function pointer, so the test behaves in a unique way.
In this patch, we assign nothing1 and nothing2 to function pointers
func_ptr_struct and func_ptr_ptr respectively, and update test as the
source file is changed.
gdb/testsuite:
2014-10-14 Yao Qi <yao@codesourcery.com>
* gdb.mi/mi-var-child.c (nothing1): New function.
(nothing2): New function.
(do_children_tests): Set function pointers by nothing1 and
nothing2.
* gdb.mi/mi-var-child.exp: Step over new added statements.
Update test to match the new output.
* gdb.mi/var-cmd.c (nothing1): New function.
(nothing2): New function.
(do_children_tests): Set function pointers by nothing1 and
nothing2.
* gdb.mi/mi-var-display.exp: Update test to match output.
Step to the line specified by $line_dct_nothing.
Increase the number of lines to step.
Hi,
I modify mi-var-child.exp and find that the pattern to match the output
of -var-update * is quite complicated. However, it can be simplified by
using mi_varobj_update. That is what this patch does.
gdb/testsuite:
2014-10-14 Yao Qi <yao@codesourcery.com>
* gdb.mi/mi-var-child.exp: Use mi_varobj_update to simplify
tests.
* gdb.mi/mi2-var-child.exp: Likewise.
This test will pass if the CU is the first CU in the binary.
If libc debugging info is installed it may not be, in which case
the CU offset values are wrong.
gdb/testsuite/ChangeLog:
* gdb.dwarf2/dw2-op-out-param.S: Make DW_FORM_ref4 values be the offset
from the start of the CU.
gdb/ChangeLog
2014-10-13 Miroslav Franc <mfranc@redhat.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
Fix "save breakpoints" for "catch" command.
* break-catch-sig.c (signal_catchpoint_print_recreate): Add trailing
newline.
gdb/testsuite/ChangeLog
2014-10-13 Jan Kratochvil <jan.kratochvil@redhat.com>
Yao Qi <yao@codesourcery.com>
Fix "save breakpoints" for "catch" command.
* gdb.base/catch-signal.exp: Add gdb_breakpoint "main".
Remove -nonewline. Match also the added "main" line.
But IMO it is a functionality regression as:
* gdb_test_sequence permits arbitary number of lines of text between those
lines being matched. Former regex string did not allow it.
This may make a difference if GDB regresses by printing some unexpected
line after the breakpoint info line (like a "silent" line).
> * \[\r\n\]+ can be used to anchor the beginning of the pattern, in the sense
> of Perl regex ^ /m match. At least I have found such cases in existing
> *.exp files so I used that. Using ^ really does not work.
>
> But I am not aware how to do Perl regex $ /m match. Using $ really does
> not work. But this means that for example the trailing
> ( \\((host|target) evals\\))?
> on the line
> "\[\r\n\]+\[ \t\]+stop only if i == 1( \\((host|target) evals\\))?"
> originally made sense there but now it can be removed as it has no longer
> any functionality there - it will match now any trailing line garbage.
by Yao Qi:
In this test case, ( \\((host|target) evals\\))? isn't needed in the
pattern. What we test here is to save breakpoints into file and restore
them from file. The contents saved in file are:
break save-bp.c:31
condition $bpnum i == 1
the information about the place where the condition is evaluated isn't
saved, so we don't need to check. Breakpoint save and restore has
nothing to do with where the condition is evaluated (host or target). I
am fine to leave it here now.
gdb/testsuite/ChangeLog
2014-10-09 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.base/save-bp.exp (info break): Use gdb_test_sequence.
Nowadays, we are using command "tstatus" to send a packet to GDBserver
in order to check the connection. However, on the target doesn't
support tracepoint, the following error is emitted before sending any
packet to GDBserver.
tstatus^M
Trace can not be run on this target.^M
(gdb) FAIL: gdb.server/server-kill.exp: tstatus
qTStatus is disabled after receiving the empty reply during connecting
to the remote target. When the test executes command "tstatus" again,
remote_get_trace_status returns -1 at the very beginning, and no RSP
packet is sent out.
This patch is to enable qTStatus packet again.
gdb/testsuite:
2014-10-11 Yao Qi <yao@codesourcery.com>
* gdb.server/server-kill.exp: Execute command
"set remote trace-status-packet on" before "tstatus".
