a crash of the assembler with some malformed source input.
Long segmented addresses are now correctly relocated.
Finally it updates my email address in the MAINTAINERS file.
(md_estimate_size_before_relax): Don't set fx_pcrel_adjust any
more.
(md_apply_fix3): Remember addend value for rela relocations.
(tc_gen_reloc): Correctly compute pc-relative relocation addend.
field for pc-relative fixups.
(output_disp): Likewise.
(md_estimate_size_before_relax): Likewise.
(tc_gen_reloc): Subtract fx_pcrel_adjust instead of fx_size for
pc-relative fixups in 64bit mode.
2002-03-15 Chris G. Demetriou <cgd@broadcom.com>
* config/tc-mips.c (mips_set_options): New "ase_mips3d" member.
(mips_opts): Initialize "ase_mips3d" member.
(file_ase_mips3d): New variable.
(CPU_HAS_MIPS3D): New macro.
(md_begin): Initialize mips_opts.ase_mips3d and file_ase_mips3d
based on command line options and configuration defaults.
(macro_build, mips_ip): Accept MIPS-3D instructions if
mips_opts.ase_mips3d is set.
(OPTION_MIPS3D, OPTION_NO_MIPS3D, md_longopts, md_parse_option):
Add support for "-mips3d" and "-no-mips3d" options.
(OPTION_ELF_BASE): Move to accomodate new options.
(s_mipsset): Support ".set mips3d" and ".set nomips3d".
(mips_elf_final_processing): Add a comment indicating that a
MIPS-3D ASE ELF header flag should be set, when one exists.
* doc/as.texinfo: Document -mips3d and -no-mips3d options.
* doc/c-mips.texi: Likewise, and document ".set mips3d" and ".set
nomips3d" directives.
[ gas/testsuite/ChangeLog ]
2002-03-15 Chris G. Demetriou <cgd@broadcom.com>
* gas/mips/mips64-mips3d.s: New file.
* gas/mips/mips64-mips3d.d: Likewise.
* gas/mips/mips.exp: Run new "mips64-mips3d" test.
[ include/opcode/ChangeLog ]
2002-03-15 Chris G. Demetriou <cgd@broadcom.com>
* mips.h (INSN_MIPS3D): New definition used to mark MIPS-3D
instructions.
(OPCODE_IS_MEMBER): Adjust comments to indicate that ASE bit masks
may be passed along with the ISA bitmask.
[ opcodes/ChangeLog ]
2002-03-15 Chris G. Demetriou <cgd@broadcom.com>
* mips-dis.c (mips_isa_type): Add MIPS3D instructions to the ISA
bit masks for bfd_mach_mips_sb1 and bfd_mach_mipsisa64. Add
comments for bfd_mach_mipsisa32 and bfd_mach_mipsisa64 that
indicate that they should dissassemble all applicable
MIPS-specified ASEs.
* mips-opc.c: Add support for MIPS-3D instructions.
(M3D): New definition.
* mips-opc.c: Update copyright years.
relocs except when BFD64.
* write.c (number_to_chars_bigendian): Don't abort when N is
larger than sizeof (VAL).
(number_to_chars_littleendian): Likewise.
(parse_ac5): New function for parsing float regs in float operand.
(parse_expression): Remove attempt to make literals be octal.
(parse_op_no_deferred): Support float literals.
(parse_op): Reject attempts to refer to float regs.
(parse_fop): New function, like parse_op but for float operand.
(md_assemble): Add cases to parse float operands. Also fix
IMM3, IMM6, IMM8 cases to pick up the operand from the right spot.
* config/tc-mips.c (mips_need_elf_addend_fixup): For embedded-PIC
only, undo the changes made on 2001-06-08, with the
effect being that common or extern symbols are
adjusted for embedded-PIC, but weak symbols are not.
(md_estimate_size_before_relax: Likewise, with the effect
that extern symbols are treated the same as weak symbols
only if not embedded-PIC.
(mips_fix_adjustable) Likewise, with the effect that
weak or extern symbols are not adjusted for embedded-PIC.
(md_apply_fix3): Tweak so that the case where value is zero
is handled more correctly for embedded-PIC code.
* config/tc-s390.c (md_parse_option): Add switches -m31 and -m64.
Make bit size independent of architecture switch.
(md_begin): Add warning for -m64 with -Aesa.
(s390_md_end): Use renamed architecture defines.
* config/tc-mips.c (mips_need_elf_addend_fixup): Restructure into
a sequence of indpendent 'if' statements for easier debugging
and future modification.
2002-02-13 Matt Fredette <fredette@netbsd.org>
* elf32-m68k.c (elf32_m68k_print_private_bfd_data): Recognize
EF_M68000.
bintuls:
2002-02-13 Matt Fredette <fredette@netbsd.org>
* readelf.c (get_machine_flags): Recognize EF_M68000.
gas:
2002-02-13 Matt Fredette <fredette@netbsd.org>
* config/tc-m68k.c (md_show_usage): No longer display a
hard-coded "68020" for the default CPU, instead display the
canonical name of the true, configured default CPU.
(m68k_elf_final_processing): Mark objects for sub-68020
CPUs with the new EF_M68000 flag.
include/elf:
2002-02-13 Matt Fredette <fredette@netbsd.org>
* m68k.h (EF_M68000): Define.
* config/tc-mips.c (IS_SEXT_32BIT_NUM): New macro to
determine if a number is a sign-extended 32-bit number.
(load_register): Use IS_SEXT_32BIT_NUM.
(macro): Check if load/store macro handling is using a
constant 32-bit address on 64-bit address systems, and if
so optimize the generation of that address.
2002-02-08 Alexandre Oliva <aoliva@redhat.com>
Stephen Clarke <Stephen.Clarke@st.com>
* doc/c-sh64.texi: Fix citation of SH64 architecture manual.
2002-01-31 Alexandre Oliva <aoliva@redhat.com>
* config/tc-sh.c (md_relax_table): Added default sizes for
non-PC-relative UNDEF_MOVI, and relaxation sequences for
MOVI_16, MOVI_32 and MOVI_48.
* config/tc-sh64.c (shmedia_md_apply_fix3): Fix warning.
(shmedia_md_convert_frag): Handle non-PC-relative UNDEF_MOVI
and MOVI_16.
(shmedia_md_estimate_size_before_relax): Remove redundant
blocks. Set fragP->fr_var even if relaxation type unchanged.
Retain UNDEF_MOVI until expression decays to number.
2002-01-24 Alexandre Oliva <aoliva@redhat.com>
* config/tc-sh64.c (shmedia_init_reloc): Handle new SHmedia PIC
relocation types. Take fixP->fx_addnumber into account too.
(shmedia_md_apply_fix): Likewise.
(shmedia_md_convert_frag): Likewise.
(shmedia_build_Mytes): Likewise.
(sh64_consume_datalabel): Complain about nested datalabel.
Support PIC relocs. Call sh_parse_name.
* config/tc-sh64.h (TC_RELOC_RTSYM_LOC_FIXUP): Extend definition
in tc-sh.h to SHmedia reloc types.
* config/tc-sh.c (SH64PCRELPLT, MOVI_PLT, MOVI_GOTOFF,
MOVI_GOTPC): New relaxation constants.
(md_relax_table): Introduce relaxation directives for PIC-related
constants.
(sh_PIC_related_p): Handle datalabel.
(sh_check_fixup): Choose SH5 PIC relocations.
(sh_cons_fix_new): Added BDF_RELOC_64.
(md_apply_fix3, sh_parse_name): Handle GOTPLT.
2002-01-18 Alexandre Oliva <aoliva@redhat.com>
* config/tc-sh64.c (sh64_max_mem_for_rs_align_code): If the
current ISA is SHmedia, get 7 bytes.
2001-11-28 Nick Clifton <nickc@cambridge.redhat.com>
* config/tc-sh.c (md_apply_fix3): Treat shmedia_md_apply_fix3 as a
void function.
* config/tc-sh64.c (shmedia_apply_fix): Rename to
shmedia_apply_fix3 and make void.
2001-05-17 Alexandre Oliva <aoliva@redhat.com>
* config/tc-sh64.c (s_sh64_abi): Remove unused arguments passed to
as_bad.
2001-04-12 Alexandre Oliva <aoliva@redhat.com>
* config/tc-sh64.h (md_parse_name): Take &c as argument.
2001-03-14 DJ Delorie <dj@redhat.com>
* doc/Makefile.am (CPU_DOCS): Added c-sh64.texi
* doc/Makefile.in(CPU_DOCS): Ditto.
* doc/c-sh64.texi: New file.
* doc/as.texinfo: Add SH64 support.
2001-03-13 DJ Delorie <dj@redhat.com>
* config/tc-sh64.c (shmedia_get_operands): Rename A_RESV_Fx to
A_REUSE_PREV so that its purpose is more obvious.
(shmedia_build_Mytes): Ditto.
2001-03-07 DJ Delorie <dj@redhat.com>
* config/tc-sh64.c (sh64_vtable_entry): New, strip datalabels
before processing.
(sh64_vtable_inherit): Ditto.
(strip_datalabels): New, strip "datalabel" from given line.
* config/tc-sh.c (md_pseudo_table): Add sh64-specific vtable
pseudos.
2001-03-06 Hans-Peter Nilsson <hpn@cygnus.com>
* config/tc-sh64.c (shmedia_md_assemble): Move dwarf2_emit_insn
call ...
(shmedia_build_Mytes): ... to here.
2001-03-06 DJ Delorie <dj@redhat.com>
* config/tc-sh.c: Remove sh64-specific uaquad now that there
is a generic one.
2001-01-21 Hans-Peter Nilsson <hpn@cygnus.com>
* config/tc-sh64.h (DWARF2_LINE_MIN_INSN_LENGTH): Override.
* config/tc-sh64.c (shmedia_md_assemble): Offset recorded insn
address by one in call to dwarf2_emit_insn.
2001-01-13 Hans-Peter Nilsson <hpn@cygnus.com>
Implement ".abi" pseudo and correct .cranges descriptors. Correct
alignment handling broken by imported changes.
* config/tc-sh64.h (HANDLE_ALIGN): Override definition in tc-sh.h.
(sh64_handle_align): Declare.
(MAX_MEM_FOR_RS_ALIGN_CODE): Override definition in tc-sh.h.
(sh64_max_mem_for_rs_align_code): Declare.
(enum sh64_isa_values): Moved here from tc-sh64.c.
(md_do_align): Define.
(sh64_do_align): Declare.
(struct sh64_tc_frag_data): New.
(TC_FRAG_TYPE): Change to struct sh64_tc_frag_data. Users
changed.
(TC_FRAG_INIT): Change to set new datatype.
(struct sh64_segment_info_type): Rename member
last_flushed_location to last_contents_mark. All users changed.
(md_elf_section_change_hook, TC_CONS_FIX_NEW): Do not define.
(shmedia_elf_new_section, sh64_tc_cons_fix_new): Do not prototype.
* config/tc-sh.c (md_pseudo_table): Add ".abi".
(sh_elf_cons) [HAVE_SH64]: Call sh64_update_contents_mark instead
of unsetting seen_insn.
(md_assemble) [HAVE_SH64] <before new SHcompact sequence>: Also
call sh64_update_contents_mark.
(sh_handle_align): Remove HAVE_SH64-conditioned code.
* config/tc-sh64.c (sh64_isa_mode): Correct type from boolean to
enum sh64_isa_values.
(sh64_set_contents_type): Drop segT parameter. All callers changed.
(emitting_crange): Boolean guard moved to file scope from function
scope in sh64_set_contents_type.
(s_sh64_abi): New.
(sh64_update_contents_mark): New; most split out from
sh64_flush_pending_output.
(shmedia_md_end): Call sh64_update_contents_mark. Set
sh64_isa_mode to sh64_isa_sh5_guard unless sh64_isa_unspecified.
(sh64_do_align): New function.
(sh64_max_mem_for_rs_align_code): New function.
(sh64_handle_align): Rename from shmedia_do_align. Make
non-static. Add head comment. Emit zero bytes for n bytes modulo
four. Change return-type to void.
(shmedia_elf_new_section): Remove.
(shmedia_md_assemble): Call sh64_update_contents_mark.
(s_sh64_mode): Ditto. Do not call md_flush_pending_output. Make
new frag. Call sh64_update_contents_mark after making the new
frag.
(sh64_flush_pending_output): Just call sh64_update_contents_mark
and sh_flush_pending_output.
(sh64_flag_output): Also call md_flush_pending_output, but add
condition on not emitting_crange.
(sh64_tc_cons_fix_new): Remove.
2001-01-12 Nick Clifton <nickc@redhat.com>
* config/tc-sh64.c (shmedia_do_align): Fix to work with new
alignment handling scheme imported from sourceware.
2001-01-12 Hans-Peter Nilsson <hpn@cygnus.com>
* config/tc-sh64.h (TARGET_FORMAT): Define.
(sh64_target_format): Prototype.
* config/tc-sh64.c (sh64_target_mach): New function.
2001-01-07 Hans-Peter Nilsson <hpn@cygnus.com>
* config/tc-sh64.c (shmedia_md_end): When equating a symbol, use
zero_address_frag instead of copying the frag of the symbol.
(shmedia_frob_file_before_adjust): Ditto.
(shmedia_md_apply_fix) <case BFD_RELOC_SH_IMM_MEDLOW16>: Cast mask
to valueT to remove signedness.
(shmedia_md_convert_frag): Add parameter final. Rename parameter
headers to output_bfd. Do not evaluate symbols if final is false;
do emit fixups.
(shmedia_md_estimate_size_before_relax) <case C (MOVI_IMM_32,
UNDEF_MOVI) et al>: If symbol cannot be modified to be PC-relative
to the current frag, call shmedia_md_convert_frag to emit fixups
and make frag_wane neutralize the frag. Update comments.
* config/tc-sh.c (md_convert_frag): Change caller of
shmedia_md_convert_frag.
2001-01-06 Hans-Peter Nilsson <hpn@cygnus.com>
* config/tc-sh64.h: Tweak comments and correct formatting.
* config/tc-sh64.c: Ditto.
(shmedia_md_convert_frag) <PT/PTA/PTB 32, 48 and 64 bit
expansion, MOVI pcrel expansion>: Fix thinko calculating offset
for the no-relocation case.
(shmedia_check_limits): Fix range check being off-by-one for PTA.
* config/tc-sh.c: Ditto. Add proper comments to #ifdef/#ifndef
wrappers.
(SH64PCREL16_F): Increment for proper max-PTA handling. Update
comment.
(SH64PCREL16_M, MOVI_16_M): Correct range thinko.
(SH64PCREL48_M, MOVI_48_M): Similar; don't count in length of
expansion.
(SH64PCREL32_M, MOVI_32_M): Ditto; handle overflowing expression.
Correct comment.
2001-01-05 Hans-Peter Nilsson <hpn@cygnus.com>
* config/tc-sh64.c (shmedia_md_apply_fix) <second switch, case
BFD_RELOC_SH_PT_16>: Set lowest bit in field to be relocated to 1.
(shmedia_md_convert_frag) <case C (SH64PCREL16_32, SH64PCREL16) et
al>: Set lowest bit of field to relocate to 1 and rest to empty,
if reloc is emitted.
2000-12-31 Hans-Peter Nilsson <hpn@cygnus.com>
New options plus bugfixes.
* config/tc-sh.c (md_longopts): New options "-no-expand" and
"-expand-pt32".
(md_parse_option): Handle new options.
(md_show_usage): Add blurb for new options.
* config/tc-sh64.c (SHMEDIA_BFD_RELOC_PT): New macro.
(sh64_expand, sh64_pt32): New variables.
(shmedia_init_reloc): Handle BFD_RELOC_SH_PT_16.
(shmedia_md_apply_fix): Hold original fixP->fx_r_type in
orig_fx_r_type. Change SHMEDIA_BFD_RELOC_PT into
BFD_RELOC_SH_PT_16. Handle BFD_RELOC_SH_PT_16 as pc-relative.
<resolved previously-pc-relative relocs>: Handle
SHMEDIA_BFD_RELOC_PT and BFD_RELOC_SH_PT_16.
(shmedia_md_convert_frag) <case C (SH64PCREL16PT_64, SH64PCREL16),
case C (SH64PCREL16PT_32, SH64PCREL16)>: Modify to PTB if operand
points to SHcompact code.
<case C (SH64PCREL16_32, SH64PCREL16), case C (SH64PCREL16_64,
SH64PCREL16)>: Check that ISA of what operand points at and
PTA/PTB matches, or emit error.
(shmedia_check_limits): Handle BFD_RELOC_SH_PT_16 and
SHMEDIA_BFD_RELOC_PT.
(shmedia_immediate_op): If pcrel, emit fixup also for constant
operand.
(shmedia_build_Mytes) <case A_IMMS16>: Also check sh64_expand in
condition for MOVI expansion.
<case A_PCIMMS16BY4>: Handle expansion to 32 bits only, if
sh64_pt32. Emit only a BFD_RELOC_SH_PT_16 fixup if not
sh64_expand.
<case A_PCIMMS16BY4_PT>: Likewise, but emit a SHMEDIA_BFD_RELOC_PT
fixup.
(sh64_target_format): Error-check setting of sh64_pt32 and
sh64_expand. Fix typo in check for sh64_shcompact_const_crange.
(shmedia_md_pcrel_from_section): Handle BFD_RELOC_SH_PT_16 and
SHMEDIA_BFD_RELOC_PT as coming from SHmedia code.
2000-12-31 Hans-Peter Nilsson <hpn@cygnus.com>
* config/tc-sh64.c: Improve comments.
(shmedia_md_convert_frag): Remove inactive is_pt_variant code. Do
not say the linker will check correctness of PTA/PTB expansion.
(shmedia_md_end): Make non-static.
* config/tc-sh64.h (md_end): Define to shmedia_md_end. Add
prototype.
* config/tc-sh.c (sh_finalize): Remove.
* config/tc-sh.h (md_end): Do not define.
Remove prototype for sh_finalize.
2000-12-30 Hans-Peter Nilsson <hpn@cygnus.com>
* config/tc-sh64.c (shmedia_frob_section_type): Use a struct
sh64_section_data container when storing section type in tdata
field in elf_section_data.
* config/tc-sh.c (sh_elf_final_processing): Change from EF_SH64 to
EF_SH5.
* Makefile.am: Update dependencies.
* Makefile.in: Regenerate.
2000-12-22 Hans-Peter Nilsson <hpn@cygnus.com>
* config/tc-sh64.c (shmedia_md_assemble): Don't protect
dwarf2_emit_insn call with test on debug_type.
2000-12-19 Hans-Peter Nilsson <hpn@cygnus.com>
* config/tc-sh64.c (sh64_set_contents_type): Make contents-type
CRT_SH5_ISA32 sticky for 64-bit.
2000-12-18 Hans-Peter Nilsson <hpn@cygnus.com>
Generate .crange sections when switching ISA mode or emitting
constants in same section as code.
* config/tc-sh64.c: Reformat structure definitions.
(sh64_end_of_assembly, sh64_mix, sh64_shcompact_const_crange): New
variables.
(sh64_set_contents_type): Rename from sh64_init_section. Rewrite
to emit a .cranges descriptor when contents type changes. Only
emit error if changing contents type and -no-mix is in effect.
(sh64_emit_crange, sh64_flush_last_crange, sh64_flag_output,
sh64_flush_pending_output, sh64_tc_cons_fix_new): New functions.
(shmedia_md_end): Set sh64_end_of_assembly. Pass
sh64_flush_last_crange over sections.
When checking main symbol of datalabel symbol, check for
STO_SH5_ISA32, not ISA type of section in definition.
(shmedia_frob_file_before_adjust): Check main symbol for
STO_SH5_ISA32; don't check ISA type of section in definition.
(shmedia_frob_section_type): Adjust for .cranges; set section flag
to SHF_SH5_ISA32_MIXED or SHF_SH5_ISA32 according to whether
.cranges entries have been output.
(shmedia_elf_new_section): Just call md_flush_pending_output.
(shmedia_md_assemble): Do not emit a BFD_RELOC_SH_SHMEDIA_CODE
fix. Do not set tc_segment_info_data.in_code for section. Call
sh64_set_contents_type for SHmedia code.
(s_sh64_mode): Do not call sh64_init_section or set seen_insn to
false. Call md_flush_pending_output.
(sh64_target_format): Check that -no-mix and
-shcompact-const-crange are used in sane combination with other
options.
(shmedia_md_pcrel_from_section): Check type of fix for how to
adjust pc-relative.
(sh64_consume_datalabel): Check symbol for having STO_SH5_ISA32,
not ISA type of section in definition.
* config/tc-sh64.h (struct sh64_segment_info_type): Rewrite to
hold contents-type state.
(md_flush_pending_output): Redefine to sh64_flush_pending_output.
(sh64_flush_pending_output): Declare.
(TC_CONS_FIX_NEW): Define to sh64_tc_cons_fix_new.
(sh64_tc_cons_fix_new): Declare.
* config/tc-sh.c (sh_elf_cons) [HAVE_SH64]: Unset seen_insn and
call sh64_flag_output.
(md_assemble) [HAVE_SH64]: Do not emit BFD_RELOC_SH_CODE. Just
call sh64_set_contents_type to mark SHcompact code and set
seen_insn.
(md_longopts): New options "-no-mix" and
"-shcompact-const-crange".
(md_parse_option): Handle new options.
(md_show_usage): Add blurb for new options.
(md_number_to_chars) [HAVE_SH64]: Call sh64_flag_output.
2000-12-15 Hans-Peter Nilsson <hpn@cygnus.com>
* config/tc-sh64.c: Delete investigated and obsolete fixme:s.
(sh64_last_insn_frag): New.
(shmedia_md_convert_frag): Use tc_frag_data field of incoming frag
to get frag for insn opcode for generating fixups; do not assume it
is the same frag.
(shmedia_build_Mytes): Set sh64_last_insn_frag after growing frag
for new insn.
* config/tc-sh64.h (ELF_TC_SPECIAL_SECTIONS): Define for .cranges
section.
(TC_FRAG_TYPE): Define as fragS *.
(TC_FRAG_INIT): Define to set tc_frag_data to sh64_last_insn_frag.
(sh64_last_insn_frag): Declare.
(sh64_consume_datalabel): Fix typo; check for seginfo != NULL,
not == NULL before dereferencing.
2000-12-12 Hans-Peter Nilsson <hpn@cygnus.com>
Get rid of BFD section flag and EF_SH64_ABI64.
* config/tc-sh64.c (shmedia_frob_section_type): Use
elf_section_data (sec)->tdata, not a specific BFD section flag, to
communicate the section as containing SHmedia code. Describe why.
* config/tc-sh.c (sh_elf_final_processing): Tweak comment. Set
EF_SH64 regardless of ABI.
* config/tc-sh64.c (shmedia_md_apply_fix): Decapitalize "invalid"
in error message. Handle resolved expressions for
BFD_RELOC_SH_IMMS10, BFD_RELOC_SH_IMMS10BY2,
BFD_RELOC_SH_IMMS10BY4 and BFD_RELOC_64.
(shmedia_check_limits): Handle BFD_RELOC_64.
(sh64_adjust_symtab): Do not decrement the GAS symbol value for
a STO_SH5_ISA32 symbol, only the BFD value.
2000-12-11 Ben Elliston <bje@redhat.com>
* config/tc-sh64.c: Call dwarf2_emit_insn, not the defunct
dwarf2_generate_asm_lineno.
2000-12-11 Hans-Peter Nilsson <hpn@cygnus.com>
Handle PC-relative MOVI expansions with assembler relaxation.
Generate PC-relative relocs from 16-bit PC-relative expressions.
* config/tc-sh64.c (SHMEDIA_MD_PCREL_FROM_FIX): Break out from...
(shmedia_md_pcrel_from_section): ...here.
(shmedia_md_apply_fix): Handle fixups for 16-bit operands that has
turned completely resolved. Adjust relocation type for 16-bit
immediate operands that has turned PC-relative. Adjust back for
MD_PCREL_FROM_SECTION being applied twice.
(shmedia_md_convert_frag): Always emit reloc for expression with
global or weak symbol. Handle relaxation result for PC-relative
expressions.
(shmedia_md_estimate_size_before_relax): An expression with a weak
or global symbol can not be relaxed. Break out tests for
relaxable symbol into variable sym_relaxable.
<cases C (MOVI_IMM_64, UNDEF_MOVI) and C (MOVI_IMM_32,
UNDEF_MOVI)>: Break out any PC-relative expression and change
relaxation type.
(shmedia_build_Mytes): CSE &operands->operands[j] into variable
opjp.
<case A_IMMS16>: Fix typo for initial minor relaxation type of
MOVI expansion. If X_op_symbol of the immediate expression is
set, make an expression symbol for the argument to frag_var.
* config/tc-sh.c (MOVI_IMM_32_PCREL, MOVI_IMM_64_PCREL): New
relaxations.
(END): Adjust for new relaxations.
(md_relax_table): Add entries for new relaxations.
2000-12-07 Ben Elliston <bje@redhat.com>
* config/tc-sh64.c (shmedia_parse_reg): Initialize variable len.
2000-12-07 Hans-Peter Nilsson <hpn@cygnus.com>
* config/tc-sh64.c (shmedia_md_convert_frag): Correct all MOVI and
SHORI operand offsets in PT/PTA/PTB expansions.
2000-12-05 Hans-Peter Nilsson <hpn@cygnus.com>
Implement DataLabel semantics.
* config/tc-sh.c (sh_frob_file) [HAVE_SH64]: Call
shmedia_frob_file_before_adjust.
* config/tc-sh64.c [! OBJ_ELF]: Emit #error.
(DATALABEL_SUFFIX): Define.
(shmedia_md_end) <before adjusting STO_SH5_ISA32 symbols>: Walk
symbol list to update "datalabel" symbols to their main symbol
counterparts.
(shmedia_frob_file_before_adjust): New.
(sh64_adjust_symtab): For remaining datalabel symbols, set to
undefined and set STT_DATALABEL.
(sh64_frob_label): Initialize TC symbol field.
(sh64_consume_datalabel): Actually implement semantics. New
parameter operandf, call it instead of expression.
(sh64_exclude_symbol): New.
* config/tc-sh64.h (md_parse_name): Pass on the function operand
to sh64_consume_datalabel.
(tc_symbol_new_hook): Define to tc_frob_symbol.
(TC_SYMFIELD_TYPE): Define to symbolS *.
(tc_frob_symbol): Define to call sh64_exclude_symbol.
2000-12-01 Hans-Peter Nilsson <hpn@cygnus.com>
* config/tc-sh64.c (shmedia_init_reloc): Tweak comment for default
case.
(shmedia_md_assemble): Call dwarf2_generate_asm_lineno if
generating dwarf2 debug information.
2000-11-30 Hans-Peter Nilsson <hpn@cygnus.com>
* config/tc-sh64.c (sh64_target_format): Use elf64-sh64l and
elf64-sh64 for the 64-bit ABI.
* config/tc-sh.c (md_show_usage): Tweak usage output for -abi=*
option.
2000-11-29 Hans-Peter Nilsson <hpn@cygnus.com>
* config/tc-sh.c: Remove conditionalizing on HAVE_SH64 for
case-insensitivity.
2000-11-27 Hans-Peter Nilsson <hpn@cygnus.com>
* config/tc-sh64.c: Tweak comments, formatting and error messages.
(enum sh64_abi_values): New type.
(enum sh64_isa_values): New type.
(sh64_isa_mode): Replace shmedia_mode. All referers changed.
(seen_shcompact_mode, seen_shmedia_mode): Delete.
(sh64_abi): Replace shmedia_64.
(shmedia_md_convert_frag) <C (MOVI_IMM_64, MOVI_64),
C (MOVI_IMM_32, MOVI_32)>: Correct register number handling.
(s_sh64_mode): Check validity for this target.
(sh64_target_format): Initialize defaults for ISA and ABI.
Fallback to old object format if no SH64 ISA or ABI has been
specified.
* config/tc-sh.c (md_parse_option): Check combinations for errors.
(sh_elf_final_processing): Change to have EF_SH64_ABI64 for 64-bit
ABI and EF_SH64 for 32-bit ABI, if SH64 options are specified.
* config/tc-sh64.h: Fix typo in comment.
2000-11-25 Hans-Peter Nilsson <hpn@cygnus.com>
* config/tc-sh64.c (shmedia_md_estimate_size_before_relax)
<PT fixups for absolute values>: Size will be longest, not
shortest.
(shmedia_md_convert_frag): Disable PTB-warning machinery. Correct
all MOVI and SHORI operand offsets in PT/PTA/PTB expansions.
* config/tc-sh.c (parse_reg) [HAVE_SH64]: Add local variables l0
and l1 to hold lowercase of two first characters. Change all
remaining TO_LOWER to tolower.
* config/tc-sh64.c (TO_LOWER): Delete.
(shmedia_find_cooked_opcode): Use tolower, not TO_LOWER.
(md_parse_name): Define.
(sh64_consume_datalabel): Declare.
(DOLLAR_DOT): Define.
* config/tc-sh64.c (shmedia_parse_exp): New.
(sh64_consume_datalabel): New; just ignoring datalabel semantics.
(shmedia_parse_reg): Remove const from src
parameter.
(shmedia_get_operands): Ditto for args parameter and ptr variable.
(shmedia_md_assemble): Ditto for op_end variable.
(shmedia_get_operand): Ditto for ptr parameter and src variable.
Use shmedia_parse_exp, not parse_exp.
* config/tc-sh64.c (shmedia_parse_reg): Add shmedia_arg_type
parameter. All callers changed.
(shmedia_get_operand): Add shmedia_arg_type parameter. All
callers changed.
(shmedia_parse_reg): Put first two character in local variables.
Use tolower, not TO_LOWER. If no register is found and argtype
indicates a control register, scan shmedia_creg_table
case-insensitive.
2000-11-24 Hans-Peter Nilsson <hpn@cygnus.com>
* Makefile.am (CPU_TYPES): Add sh64.
(TARGET_CPU_CFILES): Add config/tc-sh64.c.
(TARGET_CPU_HFILES): Add config/tc-sh64.h.
Regenerate dependencies.
* Makefile.in: Regenerate.
* configure.in: Add support for sh64-*-elf*.
* configure: Regenerate.
* config/tc-sh64.h: New.
* config/tc-sh64.c: New.
* config/tc-sh.c (md_pseudo_table) [HAVE_SH64]: New pseudos
.mode, .isa and .uaquad.
[HAVE_SH64] (SH64PCREL16_32, SH64PCREL16_64, SH64PCREL16PT_32,
SH64PCREL16PT_64, MOVI_IMM_32, MOVI_IMM_64): Define.
[HAVE_SH64] (END): Define as 10.
[HAVE_SH64] (UNDEF_SH64PCREL, SH64PCREL16, SH64PCREL32,
SH64PCREL48, SH64PCREL64, UNDEF_MOVI, MOVI_16, MOVI_32, MOVI_48,
MOVI_64): Define.
[HAVE_SH64] (SH64PCREL16_F, SH64PCREL16_M, SH64PCREL16_LENGTH,
SH64PCREL32_F, SH64PCREL32_M, SH64PCREL32_LENGTH, SH64PCREL48_F,
SH64PCREL48_M, SH64PCREL48_LENGTH, SH64PCREL64_LENGTH,
MOVI_16_LENGTH, MOVI_32_LENGTH, MOVI_48_LENGTH, MOVI_64_LENGTH):
Define.
(md_relax_table) [HAVE_SH64]: Provide relaxations for SHmedia.
(md_begin) [HAVE_SH64]: Call shmedia_md_begin.
(parse_reg) [HAVE_SH64]: Parse register names case-insensitive.
(md_assemble) [HAVE_SH64]: Call shmedia_md_assemble if assembling
SHmedia instructions. Handle state-change after switching to
SHcompact.
(md_longopts) [HAVE_SH64]: New options --isa=* and --abi=*.
(md_parse_option) [HAVE_SH64]: Parse new options.
(md_show_usage) [HAVE_SH64]: Show usage of new options.
(md_convert_frag) [HAVE_SH64] <default>: Call
shmedia_md_convert_frag instead of abort.
(sh_force_relocation) [HAVE_SH64]: Also force relocation for
BFD_RELOC_SH_SHMEDIA_CODE.
(sh_elf_final_processing) [HAVE_SH64]: Set flags identifying
SHcompact or SHmedia code.
(md_apply_fix) [HAVE_SH64] <default>: Return result from calling
shmedia_md_apply_fix instead of abort.
(md_estimate_size_before_relax) [HAVE_SH64] <default>: Return
result from calling shmedia_md_estimate_size_before_relax instead
of calling abort.
(sh_do_align) [HAVE_SH64]: If shmedia_mode, let shmedia_do_align
do the work.
(tc_gen_reloc) [HAVE_SH64]: For unrecognized relocs, call
shmedia_init_reloc and do nothing more if it returns non-zero.
(sh_finalize) [HAVE_SH64]: Call shmedia_md_end.
* po/POTFILES.in: Regenerate.
* po/gas.pot: Regenerate.
A_DISP_PC only if it's an integral constant, and to
A_DISP_PC_ABS otherwise.
(get_specific): Accept A_DISP_PC_ABS where A_DISP_PC is
expected.
(build_Mytes): Mark PCRELIMM fix-ups as pc-relative only if
the operand type is not A_DISP_PC_ABS.
* config.bfd (hppa*-*-netbsd*): New target.
gas:
* configure.in (hppa-*-netbsd*): New target.
* configure: Regenerate.
* config/tc-hppa.h: Also define WARN_COMMENTS if TE_NetBSD.
ld:
* Makefile.am (ALL_EMULATIONS): Add ehppanbsd.o.
(ehppanbsd.c): New rule.
* Makefile.in: Regenerate.
* configure.tgt (hppa*-*-netbsd*): New target.
* emulparams/hppalinux.sh: Add comment to check other files
that source this file it is modified, and list which
files that do.
* emulparams/hppanbsd.sh: New file.
base-plus-offset relocs to the linker.
* config/tc-mmix.c: Tweak and fix typos in comments.
(allocate_undefined_gregs_in_linker): New variable.
(OPTION_LINKER_ALLOCATED_GREGS): New option macro.
(md_longopts): Add --linker-allocated-gregs.
(md_parse_option) <case 'x'>: Imply --linker-allocated-gregs.
<case OPTION_LINKER_ALLOCATED_GREGS>: New.
(md_show_usage): Update text for -x. Add text for
--linker-allocated-gregs.
(tc_gen_reloc): Derive default value for addend from val and
baddsy. Use addsec and bfd_is_abs_section in more places. Don't
emit error for BFD_RELOC_MMIX_BASE_PLUS_OFFSET without suitable
GREG if allocate_undefined_gregs_in_linker.
* doc/as.texinfo (Overview) <Target MMIX options>: Add
--linker-allocated-gregs.
* doc/c-mmix.texi (MMIX-Opts): Add blurb about
--linker-allocated-gregs. Mention that it's implied by -x.
(MMIX-Pseudos) <GREG>: Mention when and how a GREG can be omitted.
(MMIX-mmixal): Clarify dated comparison and location of MMIXware.
* config/tc-mmix.h (md_parse_name): Use ISUPPER, not isupper.
do_mia, do_mar and do_mra respectively.
(do_mav_*): Renamed from do_c_*.
(mav_reg_required_here, mav_parse_offset): Renamed from
cirrus_reg_required_here and cirrus_parse_offset respectively.
(MAV_MODE?): Renamed from CIRRUS_MODE?.
* config/tc-arm.c (ARM_CEXT_XSCALE): Replaces ARM_EXT_XSCALE. All
uses changed.
(ARM_CEXT_MAVERICK): Similarly.
(ARM_ANY): Now means any core instruction.
(CPU_DEFAULT): Default to ARM_ANY.
(uses_apcs_26, atcps, support_interwork, uses_apcs_float)
(pic_code): Declare for all object types. Make type int.
(legacy_cpu, legacy_fpu, mcpu_cpu_opt, mcpu_fpu_opt, march_cpu_opt)
(march_fpu_opt, mfpu_opt): Declare.
(md_longopts): Tidy up conditional definitions.
(arm_opts, arm_cpus, arm_archs, arm_fpus, arm_extensions)
(arm_long_opts): New tables.
(arm_parse_cpu, arm_parse_arch, arm_parse_fpu): New functions.
(arm_parse_extension): New function.
(md_parse_option): Rewrite using new table-driven system.
(md_show_usage): Use new table-driven system.
(md_begin): Calculate cpu_variant from command line option data.
* doc/as.texinfo (ARM ISA options): Docuement new ARM-specific
command-line options.
* doc/c-arm.texi: Likewise.
Testsuite:
* gas/arm/vfp1.d: Use new command-line options.
* gas/arm/vfp1xD.d: Likewise.
* gas/arm/arm.exp (vfp-bad): Likewise.
* gas/arm/maverick.d: Likewise.
matched before the shorter ones.
(my_getSmallParser): Fix handling of nested parentheses in
percent_op's. Code cleanup.
(my_getPercentOp): New function, code from my_getSmallParser.
(my_getSmallExpression): Fix handling of closing parentheses.
Code cleanup. Better comments.
* tc-arm.h (md_operand): Delete define.
* tc-arm.c (in_my_get_expression): New static variable.
(my_get_expression): Set and clear it.
(md_operand): New function. If called from my_get_expression
put the error in inst.error.
(output_inst): Now takes argument of instruction being assembled.
Print it out with any error message.
(do_ldst, do_ldstv4, thumb_load_store): Fault attempt to use a store
with '=' syntax.
(end_of_line): Don't update inst.error if it is already set.
op that can be translated into a mvn instruction.
* gas/arm/ldconst.s gas/arm/ldconst.d: New files. Test ldr with
immediate pseudo-operations.
* gas/arm/arm.exp: Run it.
(int_register, cp_register, fp_register): Delete.
(reg_table): Delete. Replaced with ...
(rn_table, cp_table, cn_table, fn_table, mav_mvf_table)
(mav_mvd_table, mav_mvfx_table, mav_mvdx_table, mav_mvax_table)
(mav_dspsc_table): ... one table per register set.
(arm_reg_hsh): Delete.
(struct reg_map): New structure.
(all_reg_maps): New array.
(enum arm_reg_type): New enums.
(build_reg_hsh): New function.
(insert_reg_alias): Use hash table passed by caller. Adjust all
callers.
(create_register_alias): New function, split out from ...
(md_assemble): ... here.
(md_begin): Build new register hash tables.
(arm_reg_parse): New argument for the hash table to search. Adjust all
callers.
(arm_reg_parse_any): New function.
(co_proc_number): Look up the processor number in the processor hash
table.
(cirrus_regtype): Delete.
(cirrus_register, cirrus_mvf_register, cirrus_mvd_register)
(cirrus_mvfx_register, cirrus_mvdx_register, cirrus_mvax_register)
(ARM_EXT_MAVERICKsc_register): Delete.
(do_c_binops_1, do_c_binops_2, do_c_binops_3): Delete.
(do_c_binops_1[a-o], do_c_binops_2[a-c], do_c_binops_3[a-d]): New
functions.
(do_c_triple_4, do_c_triple_5): Delete.
(do_c_triple_4[ab], do_c_triple_5[a-h]): New functions.
(do_c_quad_6): Delete.
(do_c_quad_6[ab]): New functions.
(do_c_binops, do_c_triple, do_c_quad, do_c_shift, do_c_ldst): Rework
arguments to use new register parsing methods.
(cirrus_reg_required_here): Likewise.
(insns): Reclassify cirrus maverick worker functions.
(cirrus_valid_reg): Delete.
* Makefile.am (BFD32_BACKENDS): Add elf32-sh-nbsd.lo.
(BFD32_BACKENDS_CFILES): Add elf32-sh-nbsd.c.
(elf32-sh-nbsd.lo): New rule.
* Makefile.in: Regenerate.
* config.bfd (sh*le-*-netbsdelf*): New target.
(sh*-*-netbsdelf*): New target.
* configure.in: Include netbsd-core.lo for native sh*-*-netbsd*.
(bfd_elf32_shnbsd_vec): New vector.
(bfd_elf32_shlnbsd_vec): New vector.
* configure: Regenerate.
* elf32-sh-nbsd.c: New file.
* targets.c: Update copyright years.
(_bfd_target_vector): Add bfd_elf32_shlnbsd_vec and
bfd_elf32_shnbsd_vec.
gas:
* configure.in (sh*le): Set cpu_type=sh and endian=little.
(sh*-*-netbsdelf*): New target.
* configure: Regenerate.
* tc-sh.h: Update copyright years.
(TARGET_FORMAT): Add version for TE_NetBSD.
ld:
* Makefile.am (ALL_EMULATIONS): Add eshelf_nbsd.o and eshlelf_nbsd.o.
(eshelf_nbsd.c): New rule.
(eshlelf_nbsd.c): New rule.
* Makefile.in: Regenerate.
* configure.tgt (sh*le-*-netbsdelf*): New target.
(sh*-*-netbsdelf*): New target.
* emulparams/shelf.sh: Document that shelf_nbsd.sh sources this file.
* ld/emulparams/shelf_nbsd.sh: New emulation.
* ld/emulparams/shlelf_nbsd.sh: New emulation.
* config/tc-ppc.c (md_parse_option): BookE is not Motorola specific.
[include/opcode/ChangeLog]
* ppc.h (PPC_OPCODE_BOOKE): BookE is not Motorola specific.
(PPC_OPCODE_BOOKE64): Likewise.
R_SPARC_DISP32. Support R_SPARC_PLT32.
(sparc_reloc_map): Add BFD_RELOC_16_PCREL and BFD_RELOC_SPARC_PLT32.
(elf32_sparc_check_relocs): Handle R_SPARC_PLT32.
(elf32_sparc_relocate_section): Likewise.
* elf64-sparc.c (sparc64_elf_howto_table): Fix dst_mask for
R_SPARC_DISP32. Support R_SPARC_PLT32 and R_SPARC_PLT64.
(sparc_reloc_map): Add BFD_RELOC_16_PCREL, BFD_RELOC_64_PCREL
and BFD_RELOC_SPARC_PLT32.
(sparc64_elf_check_relocs): Handle R_SPARC_PLT32 and R_SPARC_PLT64.
(sparc64_elf_relocate_section): Likewise.
* reloc.c (bfd_reloc_code_type): Add BFD_RELOC_SPARC_PLT32.
* bfd-in2.h, libbfd.h: Rebuilt.
* config/tc-sparc.h (TC_PARSE_CONS_EXPRESSION): Define.
(sparc_cons): Provide prototype.
* config/tc-sparc.c (tc_gen_reloc): Handle BFD_RELOC_*_PCREL and
BFD_RELOC_SPARC_PLT{32,64}. Enumerate for which relocs
reloc->addend = fixp->fx_addnumber shouldn't be done instead of
enumarating for which pc relative ones it should be done.
(sparc_cons_special_reloc): New variable.
(sparc_cons): New function.
(cons_fix_new_sparc): Use sparc_cons_special_reloc.
* testsuite/gas/sparc/pcrel.s: New test.
* testsuite/gas/sparc/pcrel.d: Expected output.
* testsuite/gas/sparc/pcrel64.s: New test.
* testsuite/gas/sparc/pcrel64.d: Expected output.
* testsuite/gas/sparc/plt.s: New test.
* testsuite/gas/sparc/plt.d: Expected output.
* testsuite/gas/sparc/plt64.s: New test.
* testsuite/gas/sparc/plt64.d: Expected output.
* testsuite/gas/sparc/sparc.exp: Add pcrel, pcrel64, plt and plt64
tests.
2001-12-07 Geoffrey Keating <geoffk@redhat.com>
Richard Henderson <rth@redhat.com>
Corinna Vinschen <vinschen@redhat.com>
* Makefile.am: Add support for xstormy16.
* archures.c: Add support for xstormy16.
* config.bfd: Add support for xstormy16.
* configure.in: Add support for xstormy16.
* reloc.c: Add support for xstormy16.
* targets.c: Add support for xstormy16.
* cpu-xstormy16.c: New file.
* elf32-xstormy16.c: New file.
* Makefile.in: Regenerated.
* bfd-in2.h: Regenerated.
* configure: Regenerated.
* libbfd.h: Regenerated.
Index: binutils/ChangeLog
2001-12-07 Geoffrey Keating <geoffk@redhat.com>
* readelf.c (guess_is_rela): Add support for stormy16.
(dump_relocations): Likewise.
(get_machine_name): Likewise.
Index: gas/ChangeLog
2001-12-07 Geoffrey Keating <geoffk@redhat.com>
Richard Henderson <rth@redhat.com>
* configure.in: Add support for xstormy16.
* configure: Regenerated.
* Makefile.am: Add support for xstormy16.
* Makefile.in: Regenerated.
* config/tc-xstormy16.c: New file.
* config/tc-xstormy16.h: New file.
Index: gas/testsuite/ChangeLog
2001-12-07 Geoffrey Keating <geoffk@redhat.com>
matthew green <mrg@redhat.com>
* gas/xstormy16/allinsn.d: New file.
* gas/xstormy16/allinsn.exp: New file.
* gas/xstormy16/allinsn.s: New file.
* gas/xstormy16/allinsn.sh: New file.
* gas/xstormy16/gcc.d: New file.
* gas/xstormy16/gcc.s: New file.
* gas/xstormy16/gcc.sh: New file.
* gas/xstormy16/reloc-1.d: New file.
* gas/xstormy16/reloc-1.s: New file.
* gas/xstormy16/reloc-2.d: New file.
* gas/xstormy16/reloc-2.s: New file.
Index: ld/ChangeLog
2001-12-07 Geoffrey Keating <geoffk@redhat.com>
Richard Henderson <rth@redhat.com>
* Makefile.am: Add support for xstormy16.
* configure.tgt: Add support for xstormy16.
* Makefile.in: Regenerate.
* emulparams/elf32xstormy16.sh: New file.
* scripttempl/xstormy16.sc: New file.
Index: opcodes/ChangeLog
2001-12-07 Geoffrey Keating <geoffk@redhat.com>
* Makefile.am: Add support for xstormy16.
* Makefile.in: Regenerate.
* configure.in: Add support for xstormy16.
* configure: Regenerate.
* disassemble.c: Add support for xstormy16.
* xstormy16-asm.c: New generated file.
* xstormy16-desc.c: New generated file.
* xstormy16-desc.h: New generated file.
* xstormy16-dis.c: New generated file.
* xstormy16-ibld.c: New generated file.
* xstormy16-opc.c: New generated file.
* xstormy16-opc.h: New generated file.
Index: include/ChangeLog
2001-12-07 Geoffrey Keating <geoffk@redhat.com>
* dis-asm.h (print_insn_xstormy16): Declare.
Index: include/elf/ChangeLog
2001-12-07 Geoffrey Keating <geoffk@redhat.com>
Richard Henderson <rth@redhat.com>
* common.h (EM_XSTORMY16): Define.
* xstormy16.h: New file.
cond_offset. Rename variants->variant.
(insns): Adjust for new format. Explicitly code each variant that
takes flags. Remove temporary instructions.
(struct arm_it): Remove redundant field suffix.
(s_flag, ldr_flags, str_flags, byte_flag, cmp_flags, ldm_flags)
(stm_flags, lfm_flags, sfm_flags, round_flags, fix_flags, except_flag)
(long_flag): Delete.
(struct asm_flg): Delete.
(LONGEST_INST): Delete.
(V4_STR_BIT): Define.
(struct thumb_opcode): Rename variants->variant.
(do_empty): Renamed from do_nop.
(ldst_extend): Delete argument hwse. Split code for half-word and
signed byte instructions to ...
(ldst_extend_v4): ... here.
(ld_mode_required_here): Use ldst_extend_v4.
(do_ldrd): Simplify now that this is only called for ldrd. No
need to test for XScale, which was wrong anyway. Don't reject r12
as a target register. Add test that ldrd doesn't update an index
register.
(do_pld): Don't allow post-indexed or write-back addressing modes.
Adjust call to ldst_extend.
(do_adr): Split code for adrl to ...
(do_adrl): ... here.
(do_cmp): No need to fold in COND_BIT.
(do_ldst): Simplify. Split code for ldrt/strt into do_ldstt. Split
code to handle half-word and signed byte instructions to ...
(do_ldstv4): ... here.
(do_ldstt): New function. Handle load/store with translate.
(do_ldmstm): Write feature modification bits directly into
inst.instruction.
(do_fpa_ldst): Remove suffix handling code.
(do_fpa_dyadic, do_fpa_monadic, do_fpa_from_reg): Likewise.
(do_fpa_ldmstm): Type of access is now held in inst.instruction.
(build_arm_ops_hsh): New function.
(md_begin): Call it. Don't build the ARM opcode directly.
(md_assemble): Simplify ARM instruction handling.
(elf64_alpha_relocate_section): Translate local_got_entries
for STT_SECTION symbol to SHF_MERGE section the first time
we see it.
* elfxx-ia64.c (struct elfNN_ia64_local_hash_entry): Add
sec_merge_done.
(get_local_sym_hash): New, extracted from get_dyn_sym_info.
(get_dyn_sym_info): Use it.
(elfNN_ia64_relocate_section): Translate local dyn entries
for STT_SECTION symbol to SHF_MERGE section the first time
we see it.
* write.c (adjust_reloc_syms): Mark SEC_MERGE symbols as used
in reloc if it has non-zero addend.
* config/tc-alpha.c (tc_gen_reloc): Reinstall SEC_MERGE check.
* config/tc-sparc.c (md_apply_fix3): Likewise.
(md_apply_fix3): ...here. Don't prevent the symbol value being
subtracted twice from GPREL addends.
(tc_gen_reloc): Add the symbol value to a GPREL addend if it was
subtracted by the previous function.
(md_longopts): Allow OPTION_MABI for ELF compilation only. RE-allow
OPTION_GP32, OPTION_GP64, OPTION_FP32 for non-ELF compilation.
Sort options a bit more logical.
(md_parse_option): Allow OPTION_32, OPTION_N32, OPTION_N64,
OPTION_MABI only for elf targets.
* gas/mips/mips.exp: Change naming of some conditionals to reflect
the object format they actually mean. Don't try mips-abi32 and
mips-abi32-pic tests for ecoff.
mips_set_options.
(mips_set_options): Add members gp32, fp32, abi.
(file_mips_gp32): New flag.
(file_mips_fp32): New flag.
(mips_opts): Initialize the new members.
(mips_gp32): Remove.
(mips_fp32): Remove.
(HAVE_32BIT_GPRS): Use the new values from mips_opts.
(HAVE_32BIT_FPRS): Likewise.
(HAVE_NEWABI): Likewise.
(HAVE_64BIT_OBJECTS): Likewise.
(md_begin): Likewise. Save default (file) values.
(md_parse_option): Use the new values from mips_opts.
(s_mipsset): Likewise. Fix logic to keep the ABI selection if
possible. Let .set mipsN work together with .set push/pop.
Enhance error messages.
(mips_elf_final_processing): Use file_mips_* for header processing.
(insns): Re-arrange instructions by archtitecture. Pld instruction
is part of ARMv5E.
(tinsns): blx and bkpt are part of ARMv5T.
(do_fp_{ctrl,ldst,ldstm,dyadic,monadic,cmp,from_reg,to_reg}): Rename
to do_fpa_*. All callers changed.
* tc-arm.c (insns): Add two temporary instructions to handle
ldrd/strd.
2001-10-31 Chris Demetriou <cgd@demetriou.com>
* elf32-mips.c (_bfd_mips_elf_hi16_reloc): Handle PC-relative
relocations properly.
[ gas/ChangeLog ]
2001-10-31 Chris Demetriou <cgd@broadcom.com>
* config/tc-mips.c (HAVE_32BIT_ADDRESSES): If compiling embedded
PIC code, assume pointers the same size as GPRs.
(macro): In M_LA_AB handling for embedded PIC code, support
"la $treg,foo-bar($breg)". In load/store handling
(label ld_st) support "<op> $treg,<sym>-<local_sym>($breg)"
which is used by the compiler for switch statements.
In load/store double multi-instruction macro handling
(label ldd_std) add a comment that no special handling
is currently done for embedded PIC.
(mips_ip): In 'o' (16-bit offset) case, only accept 16
bit offsets.
[ gas/testsuite/ChangeLog ]
2001-10-31 Chris Demetriou <cgd@broadcom.com>
* gas/mips/empic.s: Undo damage inflicted on 2000-12-02.
* gas/mips/empic.d: Likewise.
* gas/mips/elempic.d: Likewise (it was copied into other files).
* gas/mips/telempic.d: Likewise.
* gas/mips/tempic.d: Likewise.
* gas/mips/empic2.s: New test to check new 'la' and 'lw' (and
related ops) syntax, test loads with large offsets.
* gas/mips/emcic2.d: Likewise.
* gas/mips/mips.exp: Run the new test on ELF platforms.
* tc-arm.c (ARM_EXT_LONGMUL, ARM_EXT_HALFWORD, ARM_EXT_THUMB): Delete.
(ARM_2UP, ARM_ALL, ARM_3UP, ARM_6UP): Delete.
(FPU_CORE, FPU_FPA10, FPA_FPA11, FPU_ALL, FPA_MEMMULTI): Delete.
(ARM_EXT_V{1,2,2S,3,3M,4,4T,5T,5ExP}): New defines.
(ARM_EXT_V{5,5E}): Synchronize with above.
(ARM_ARCH_V*): Define a complete set in terms of above features.
(ARM_{1,2,3,250,6,7,8,9,STRONG}): Define in terms of architecture.
(FPU_FPA_EXT_V[12]): Define.
(FPU_ARCH_FPE, FPU_ARCH_FPA): Define in terms of above.
(FPU_ANY): Define.
(FPU_DEFAULT): Default to FPA.
(CPU_DEFAULT): For XScale, this is now just ARM_ARCH_XSCALE; for
Thumb, this is now ARM_ARCH_V5T.
(insns): Rework for new feature defines.
(tinsns): Likewise.
(opcode_select, do_ldst, md_begin, md_parse_option): Likewise.
(ppc_size): Select PPC_OPCODE_64 if 64 bit.
(md_begin): Don't set ppc_size here.
(ppc_target_format): Test ppc_size as well as BFD_DEFAULT_TARGET_SIZE.
(md_shortopts): Constify.
(md_longopts): Likewise.
(md_longopts_size): Likewise.
(ppc_elf_suffix): Only allow 64-bit relocs when ppc_size specifies
64-bit opcodes.
(ppc_machine): Explain why this function is a nop.
* config/tc-ppc.c (md_parse_option): New -m7410, -m7450 and -m7455
flags, equivalent to -m7400. New -maltivec to enable AltiVec
instructions. New -mbook64 and -mbooke/-mbooke32 flags to enable
64-bit and 32-bit BookE support, respectively. Change -m403 and
-m405 to set PPC403 option.
(md_show_usage): Adjust for new options.
* doc/all.texi: Set PPC.
* doc/as.texinfo: Add PPC support and pull in c-ppc.texi.
* doc/c-ppc.texi: New file.
* doc/Makefile.am (CPU_DOCS): Add c-ppc.texi.
* doc/Makefile.in: Regenerate.
[gas/testsuite/ChangeLog]
* gas/ppc/booke.s: New test for Motorola BookE.
* gas/ppc/booke.d: New file.
* gas/ppc/ppc.exp: Test booke.s.
[include/opcode/ChangeLog]
* ppc.h (PPC_OPCODE_BOOKE, PPC_OPCODE_403): New opcode flags for
BookE and PowerPC403 instructions.
[opcodes/ChangeLog]
* ppc-opc.c (insert_de, extract_de, insert_des, extract_des): New
instruction field instruction/extraction functions for new BookE
DE form instructions.
(CT): New macro for CT field in an X form instruction.
(DE, DES, DEO, DE_MASK): New macros for DE/DES fields in DE form
instructions.
(PPC64): Don't include PPC_OPCODE_PPC.
(403): New opcode macro for PPC403 processors.
(BOOKE): New opcode macro for BookE processors.
(bce, bcel, bcea, bcela, bclre, bclrel: New BookE instructions.
(bcctre, bcctrel, be, bel, bea, bela, icbt, icbte, lwzxe): Likewise.
(dcbste, lwzuxe, luxe, dcbfe, lbzxe, lwarxe, lbzuxe): Likewise.
(stwcxe, stwxe, stxe, stwuxe, stuxe, stbxe, dcbtste, stbuxe): Likewise.
(mfapidi, dcbte, lhzxe, lhzuxe, lhaxe, lhauxe, subfe64): Likewise.
(subfeo64, adde64, addeo64, sthxe, sthuxe, subfze64): Likewise.
(subfzeo64, addze64, addzeo64, dcbie, subfme64, subfmeo64): Likewise.
(addme64, addmeo64, stdcxe., mcrxr64, lwbrxe, lfsxe, lfsuxe): Likewise.
(lfdxe, lfduxe, stwbrxe, stfsxe, stfsuxe, stfdxe, dcbae): Likewise.
(stfduxe, tlbivax, tlbivaxe, lhbrxe, ldxe, lduxe, tlbsx): Likewise.
(tlbsxe, sthbrxe, stdxe, stduxe, icbie, stfiwxe, dcbze, lbze): Likewise.
(lbzue, ldue, lhze, lhzue, lhae, lhaue, lwze, lwzue): Likewise.
(stbe, stbue, sthe, sthue, stwe, stwue, lfse, lfsue, lfde): Likewise.
(lfdue, stde, stdue, stfse, stfsue, stfde, stfdue): Likewise.
* ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc): Look
for a disassembler option of `booke', `booke32' or `booke64' to enable
BookE support in the disassembler.
(mips_cpreturn_register): Likewise.
(mips_gp_register): Likewise.
(s_cpsetup): New function prototype.
(s_cplocal): Likewise.
(s_cpreturn): Likewise.
(s_gpvalue): Likewise.
(mips_pseudo_table): Add .cpsetup, .cplocal, .cpreturn, .gpvalue
pseudo-ops.
(macro): Don't warn about .cprestore for NewABI.
(md_pcrel_from): Code cleanup.
(mips_force_relocation): Force output of some NewABI relocations even
without a defined symbol.
(s_cpload): Ignore .cpload for NewABI.
(s_cpsetup): Handle .cpsetup.
(s_cplocal): Handle .cplocal.
(s_cprestore): Ignore .cprestore for NewABI.
(s_cpreturn): Handle .cpreturn.
(s_gpvalue): Handle .gpvalue.
(s_cpadd): Ignore .cpadd for NewABI.
(nopic_need_relax): Take g_switch_value into account as gp
optimization.
(tc_gen_reloc): Don't handle BFD_RELOC_MIPS_{CALL,GOT}* for NewABI.
(small_ex_type): Named this enum, more return values for
my_getSmallExpression.
(mips_ip): Allow SPC and HT between arguments. Handle some NewABI
triple relocations. Protect some parts with ifdef OBJ_ELF.
(percent_op_match): New struct, lookup table for %some_reloc().
(my_getSmallParser): New function, parses nested percent_ops also.
(my_getSmallExpression): Rewite to support nested percent_ops.
(load_address): Support both 32- and 64-bit addresses.
(macro): Call load_register correctly. Expand 64-bit loads ans stores.
(macro2): Call load_address correctly.
throughout file.
(obj_elf_change_section): Rename "group" to "group_name".
(obj_elf_section): Likewise.
(elf_frob_file): Don't use sec->lineno for SHT_GROUP section to store
first member section; Instead use elf_next_in_group.
Set elf_section_data group from it. Warn if group name changed.
(obj_elf_parse_section_letters): Parse 'G' too.
(obj_elf_section): Parse group name.
(struct group_list): New.
(build_group_lists): New function.
(elf_frob_file): Create SEC_GROUP section(s).
* config/obj-elf.c: (elf_copy_symbol_attributes): Zap trailing
whitespace.
capitalise, no final period or newline, don't say "ignoring" for
as_bad messages. In some cases, change the wording to that used
elsewhere for similar messages.
(obj_elf_section_name): New function, split out from ..
(obj_elf_section): .. here. Correctly mask off SHF_MERGE if
entsize not specified.
relocation triple.
(prev_insn_fixp): Likewise.
(append_insn): Changed prototype to accept a relocation pointer.
(imm_reloc): Make it an array.
(offset_reloc): Likewise.
(md_assemble): Handle triple relocations.
(append_insn): Likewise. Add handling for some NewABI relocations.
(mips_no_prev_insn): Handle triple relocations.
(macro_build): Likewise. Add handling for some NewABI relocations.
Move handling for the 'u' case to append_insn().
(mips16_macro_build): Handle triple relocations.
(macro_build_lui): Likewise. Don't handle _gp_disp as special symbol
for NewABI.
(mips_ip): Handle triple relocations.
(mips16_ip): Likewise.
(mips_force_relocation): Force handling of triple relocations
without symbols for NewABI.
(md_apply_fix): Add handling for some NewABI relocations.
(mips_target_format): Move downwards in file, use HAVE_64BIT_OBJECTS
in it.
(mips_abi_level, mips_abi): New enum.
(mips_32bit_abi): Remove.
(HAVE*PRS): Use mips_abi instead of mips_32bit_abi.
(HAVE_NEWABI): New define.
(HAVE_64BIT_OBJECTS): New define.
(HAVE_32BIT_ADDRESSES): Don't return true for 64bit objects.
(HAVE_64BIT_ADDRESSES): New define, inverse of HAVE_32BIT_ADDRESSES.
(support_64bit_objects): New prototype.
(md_begin): Use mips_abi instead of mips_32bit_abi. Don't write
.reginfo section for n32, use .MIPS.options instead.
(support_64bit_objects): New function, code from md_parse_option.
(md_longopts): Add -n32 option.
(md_parse_option): Use mips_abi instead of mips_32bit_abi/mips64.
Add -n32 option. Protect with OBJ_ELF.
(s_mipsset): Use mips_abi instead of mips_32bit_abi.
(mips_elf_final_processing): Likewise. Don't write .reginfo section
for n32, use .MIPS.options instead.
* write.c (set_symtab): Update bfd_alloc declaration. Use a temp
var to ensure bfd_alloc arg is the right type.
(write_object_file): Cast args of bfd_seek. Replace bfd_write with
bfd_bwrite.
* config/obj-coff.c: Replace calls to bfd_write with calls to
bfd_bwrite. Cast args of bfd_seek.
* config/obj-elf.c (obj_elf_change_section): Avoid signed/unsigned
warning.
* config/tc-mn10300.c (set_arch_mach): Make param unsigned.
* config/tc-tic54x.c (tic54x_mlib): Replace bfd_read call with
call to bfd_bread.
and rearrange for efficiency. For "PIC code" subtraction, use
"rightseg" rather than recalculating. For "symbol OP symbol"
subtract, set "retval" to absolute_section if symbols in same
section.
* symbols.c (resolve_symbol_value): Resolve "sym +/- expr" to an
O_symbol. Simplify a +/- b code. Allow equality and non-equality
comparisons on symbols from any section. Allow other comparison
operators as for subtraction.
(symbol_equated_reloc_p): New predicate function.
* symbols.h (symbol_equated_reloc_p): Declare.
* write.c (adjust_reloc_syms): Use symbol_equated_reloc_p.
(write_relocs): Likewise.
(write_object_file): Likewise.
(relax_segment <rs_machine_dependent>): Ensure segment for
expression syms is set correctly.
* config/tc-mips.c (md_estimate_size_before_relax): Likewise.
* config/tc-i386.c (md_assemble <Output jumps>): Don't lose part
of a complex expression when setting up frag_var.
(MACRO_LITERAL, MACRO_BASE, MACRO_BYTOFF, MACRO_JSR): Remove.
(alpha_macros): Remove occurrences of same.
(O_lituse_addr, O_gprel): New.
(DUMMY_RELOC_LITUSE_*): New.
(s_alpha_ucons, s_alpha_arch): Prototype.
(alpha_reloc_op): Construct elements via DEF macro.
(ALPHA_RELOC_SEQUENCE_OK): Remove.
(struct alpha_reloc_tag): Rename from alpha_literal_tag; rename
members to not be literal specific.
(next_sequence_num): New.
(md_apply_fix3): Cope with missing GPDISP_LO16. Adjust for
added/removed BFD relocations.
(alpha_force_relocation, alpha_fix_adjustable): Likewise.
(alpha_adjust_symtab_relocs): Handle GPDISP relocs as well.
(tokenize_arguments): Parse ! relocations properly.
(find_macro_match): Delete unused macro argument types.
(assemble_insn): Add reloc parameter; emit that instead of the
default as appropriate.
(get_alpha_reloc_tag): New. Split from ...
(emit_insn): ... here. Allocate a reloc tag for GPDISP.
(assemble_tokens): Don't search macros if user relocation present.
Copy reloc sequence number to insn struct.
(emit_ldgp): Remove user reloc handling.
(load_expression, emit_lda, emit_ldah, emit_ir_load): Likewise.
(emit_loadstore, emit_ldXu, emit_ldil, emit_stX): Likewise.
(emit_sextX, emit_division, emit_jsrjmp, emit_retjcr): Likewise.
* config/tc-alpha.h (tc_adjust_symtab): Always define.
(struct alpha_fix_tag): Name members less literal specific.
* gas/alpha/alpha.exp: New file.
* gas/alpha/elf-reloc-1.[sd]: New test.
* gas/alpha/elf-reloc-2.[sl]: New test.
* gas/alpha/elf-reloc-3.[sl]: New test.
* gas/alpha/elf-reloc-4.[sd]: New test.
* gas/alpha/fp.exp: Remove file.
* gas/alpha/fp.s: Output to .data not .rdata.
* gas/alpha/fp.d: Adjust to match.
offset match H8 ELF spec.
(md_section_align): Alternate implementation for BFD_ASSEMBLER.
(md_apply_fix): Fix argument and return types for BFD_ASSEMBLER.
(build_bytes): Mark fixups for PCrel branches as signed. For
OBJ_ELF, make sure the reloc's offset points to the first byte
to be modified.
(md_convert_frag): Update definiton based on BFD_ASSEMBLER.
* tc-h8300.h (relocation mappings): Add.
* tc-h8300.c (tc_crawl_symbol_chain, tc_headers_hook): Don't
define for BFD_ASSEMBLER.
(tc_reloc_mangle): Likewise.
(tc_gen_reloc): New function for BFD_ASSEMBLER.
More of Joern's patches with minor changes s/OBJ_ELF/BFD_ASSEMBLER/
assorted coff relocations to the corresponding elf relocations.
* tc-h8300.h (TARGET_ARCH, TARGET_FORMAT): Define appropriately.
More of Joern's patches.
* configure: Regenerate.
* config/tc-ppc.c (PPC_LO, PPC_HI, PPC_HA, PPC_HIGHER,
PPC_HIGHERA, PPC_HIGHEST, PPC_HIGHESTA, SEX16): New macros.
(md_assemble): Use them.
(ppc_machine): Support stub for ELF64 as well as XCOFF.
(md_pseudo_table): Add "llong", "quad".
(md_parse_option): Match default_cpu of powerpc*.
(ppc_arch): Likewise.
(ppc_subseg_align): Only for OBJ_XCOFF.
(ppc_target_format): Return elf64-powerpc strings for 64 bit ELF.
(md_begin): Select PPC_OPCODE_64 for 64 bit.
(ppc_insert_operand): Don't bother testing 'file' before calling
as_bad_where. Use as_bad_where for operand->insert errors.
(mapping): Add ELF64 relocation modifiers.
(ppc_elf_suffix): Replace symbol on BFD_RELOC_PPC64_TOC reloc
expressions with abs_symbol.
(ppc_elf_cons): Correct offset for little endian targets.
(ppc_elf_frob_symbol): New.
(md_assemble): Add support for 64 bit ELF relocs.
(ppc_tc): Ensure 8 byte alignment when 64 bit.
(ppc_is_toc_sym): Only define for OBJ_XCOFF and OBJ_ELF. Match
".toc" section for 64 bit ELF.
(ppc_fix_adjustable): New. Macro body moved from tc-ppc.h.
(md_apply_fix3): Silence warning with ATTRIBUTE_UNUSED. Only do
the ppc_is_toc_sym check for OBJ_XCOFF and OBJ_ELF. For 64 bit,
use BFD_RELOC_PPC64_TOC16_DS instead of BFD_RELOC_PPC_TOC16.
Expand on comments, error message. Add support for 64 bit relocs,
and use PPC_HI etc. macros.
* config/tc-ppc.h (MAX_MEM_FOR_RS_ALIGN_CODE): Define.
(HANDLE_ALIGN): Define to generate nops in code sections rather
than zeros.
(TC_FORCE_RELOCATION): Force for BFD_RELOC_PPC64_TOC.
(ELF_TC_SPECIAL_SECTIONS): Add 64 bit ELF sections.
(tc_fix_adjustable): Move body of macro to tc-ppc.c.
(ppc_fix_adjustable): Declare.
(tc_frob_symbol): Define.
(ppc_elf_frob_symbol): Declare.
value, not the word beyond maximum.
* tc_mips.c (macro_build_lui): Code cleanup.
(macro): Reflect change to MAX_GPREL_OFFSET.
(mips_ip): Check explicitly against S_EX_NONE.
(my_get_SmallExpression): parse for %gp_rel, not %gprel.
(md_apply_fix): Code cleanup.
return values.
(mips_ip): Use the new return values instead of characters. Add
support for %higher and %highest.
(LP): Remove.
(RP): Remove.
(my_getSmallExpression): Make parsing case insensitive and more
reliable. Add support for %higher and %highest. Further support to
parse %gprel and %neg is implemented but currently deactivated.
-mipsX is specified. Make both -mcpu/-march and -mcpu/-mtune pairs
mutually exclusive (if they are different).
(md_parse_option): Warn if an -march/-mtune/-mcpu/-m<cpu> option is
set more than once.
* config/tc-mips.c (mips_fp32, mips_32bit_abi): New static variables.
(md_long_opts): Add -mfp32 option.
(md_parse_option): Handle it. Set mips_32bit_abi given -mabi=32.
(md_show_usage): Show usage for -mfp32 and -mgp32.
(HAVE_32BIT_GPRS, HAVE_32BIT_FPRS): New macros.
(HAVE_64BIT_GPRS, HAVE_64BIT_FPRS): New macros, inverse of the above.
(HAVE_32BIT_ADDRESSES): New macro.
(load_register): Use HAVE_32BIT_GPRS to determine the register width.
(load_address): Use HAVE_32BIT_ADDRESSES to determine the address size.
(s_cprestore, s_cpadd): Likewise.
(macro): Use HAVE_32BIT_GPRS to determine the width of registers
used in branch and M_LI_D macros. Use HAVE_64BIT_FPRS to determine
the width registers used in M_LI_DD macros. Use HAVE_32BIT_ADDRESSES
to determine the width of addresses in load, store and jump macros.
(macro2): Use HAVE_32BIT_GPRS to determine the width of registers
used in set instructions; do not check the address size for them.
Use HAVE_32BIT_ADDRESSES to determine the width of addresses in
unaligned load and store macros.
(mips_ip): Use the new macros to check the width of a register when
processing float constants. Force a constant into memory if it is
destined for an FPR and the FPRs are wider than the GPRs. Warn about
odd FPR numbers if HAVE_32BIT_FPRS. Use HAVE_32BIT_GPRS rather
than mips_gp32 to select synthetic instructions.
(macro_build): Use HAVE_32BIT_GPRS rather than mips_gp32 to select
synthetic instructions.
* config/tc-mips.c (md_estimate_size_before_relax): Make sure
we treat weak like extern only for ELF.
(mips_fix_adjustable): Make sure we don't adjust extern/weak
symbols only for ELF.