means the process is single threaded, so there's no need to add
it to the thread list. Handle case where multi-threaded process
reverts back to a single-threaded process.
after the inferior gdb has started.
'cuz lynx may take a couple minutes to start the inferior gdb...
* gdb.base/a2-run.exp: Handle gdb echoing more than one cr-lf
after each command.
* gdb.base/funcargs.exp: Likewise.
* gdb.base/gdbvars.exp: Likewise.
* gdb.base/interrupt.exp: Likewise.
* gdb.base/list.exp: Likewise.
* gdb.base/watchpoint.exp: Likewise.
* gdb.c++/demangle.exp: Likewise.
* gdb.c++/inherit.exp: Likewise.
* gdb.chill/chexp.exp: Likewise.
* gdb.fortran/exprs.exp: Likewise.
Just in case we can't get a version of expect that sets the tty modes
right on lynx to avoid this problem.
started after sending a "run" command to gdb.
(text_next_with_recursion): Don't check the output from the
program's printf statement. Instead just make sure the program
exited.
* infrun.c (wait_for_inferior): Set the convenience variable
$_exitcode to the termination code of the inferior.
* top.c (quit_command): Accept optional expression to use
as parameter to exit().
* config/tc-arm.h (BYTE_ORDER): Delete.
(TARGET_FORMAT): Provide value for OBJ_COFF and TE_PE.
(ARM_BI_ENDIAN): Define if OBJ_COFF and TE_PE.
* config/tc-arm.c (byte_order): Delete.
(md_number_to_chars): Reference target_big_endian, not byte_order.
(md_chars_to_number): Likewise.
(md_longopts): Add -EB/-EL if ARM_BI_ENDIAN.
(md_parse_options): Recognize -EB/-EL.
(md_show_usage): List -EB/-EL.
* gdbserver/Makefile.in (SFILES): Add low-hppabsd.c.
* config/hppabsd.mh (XDEPFILES): Add ser-tcp.o
(GDBSERVER_DEPFILES): Add low-hppabsd.o
* config/hppaosf.mh: LIkewise.
Needed this for the gdbserver framework development. Trying to avoid doing
development work on lynx for the obvious reasons.
* gdbserver/Makefile.in (SFILES): Add low-hppabsd.c.
* config/hppabsd.mh (XDEPFILES): Add ser-tcp.o
(GDBSERVER_DEPFILES): Add low-hppabsd.o
* config/hppaosf.mh: LIkewise.
Needed this for the gdbserver framework development. Trying to avoid doing
development work on lynx for the obvious reasons.
to char, since everything passed in and out of dcache is char or casted
to appropriate type anyway.
(dcache_alloc): Move assignment of db out of test and combine separate
tests into if-else.
(dcache_peek_byte): Change ptr from unsigned char* to char*.
(dcache_peek_byte): Remove now unnecessary cast in read_memory call.
(dcache_peek): Change cast of incoming data arg.
(dcache_poke): Change cast of addr of incoming data arg.
(dcache_info): Mask data passed to printf_filtered to lsbyte only.
(dcache_info): Change printf_filtered arg from "% 2x" to " %2x".
* target.c (debug_to_thread_alive): Change return type to int and
return zero, for type compatibility with other *_thread_alive funcs.
(cleanup_target): Change cast of ignore function to match type of the
to_thread_alive member.
* defs.h (error_hook): Add ATTR_NORETURN.
* defs.h (NORETURN, ATTR_NORETURN): Switch from volatile to
__attribute__ method with gcc 2.7, to avoid gcc 2.6.3 bug.
* remote.c (remote_wait): Cast first arg to strtol, strchr, and strncmp
to "const char *" from "unsigned char *".
(remote_wait): Cast arg to putpkt and strcpy from "unsigned char *" to
"char *".
(remote_wait): Change printf format for long arg from "%d" to "%ld".
(getpkt): Remove unused variable "bp".
(remote_fetch_word, remote_store_word): Ifdef out apparently unused
functions.
* breakpoint.c (watchpoint_check): Removed unused variables
"saved_level" and "saved_frame".
* valops.c (value_arg_coerce): Add other enum TYPE_CODE_* and
default cases to switch for completeness.
* infrun.c (wait_for_inferior): Enclose "have_waited" label
in #ifdef that matches the one in which it is referenced.
* ser-unix.c (hardwire_noflush_set_tty_state): Enclose otherwise
unused variable "state" in #ifdef that matches one in which it is
referenced.
* eval.c (evaluate_subexp_standard): Remove unused variable "var".
* eval.c (evaluate_subexp_standard): Remove unused variable "tmp_symbol".
* valarith.c (value_subscript): Remove unused variable "lowerbound",
which is redeclared in a nested scope prior to use.
* printcmd.c (print_frame_nameless_args): Use "%ld" to print long
arg, not "%d".
* {mem-break.c, remote-pa.c, remote.c, saber.suppress}:
Remove unused static var "check_break_insn_size".
* buildsym.c (finish_block): Add other enum LOC_* and default
cases to switch for completeness.
ch-lang.c (type_lower_upper): Removed unused label "retry".
Add other enum TYPE_* and default cases to switch for completeness.
* f-typeprint.c (f_type_print_args): Ifdef out unused function
that may be used someday when Fortran support is complete.
* ch-valprint.c (chill_print_type_scalar): Add other enum
TYPE_* and default cases to switch for completeness.
(chill_val_print): Remove unused local var "high_bound" that
is redeclared in a nested scope prior to use.
(chill_var_print): Use "%ld" to print long arg, not "%d".
* regex.c (re_compile_fastmap, re_match_2): Add remaining enum types
and default to switches for completeness.
* minsyms.c (lookup_minimal_symbol_text): Delete unused variable
"trampoline_symbol".
(prim_record_minimal_symbol_and_info): Return NULL rather than trash.
* elfread.c (elf_symtab_read): Don't dereference NULL returns from
record_minimal_symbol_and_info.
* f-lang.c (saved_function_list_end): Ifdef out unused variable
that may be used someday.
* f-valprint.c (f_val_print): Remove unused local variable "straddr".
(coffstab_build_psymtabs): Remove staboff and stabsize parameters.
Add textaddr, textsize, and stabs parameters.
* gdb-stabs.h (struct dbx_symfile_info): Remove text_sect field.
Add text_addr and text_size fields.
(DBX_TEXT_SECT): Don't define.
(DBX_TEXT_ADDR, DBX_TEXT_SIZE): Define.
* coffread.c: Include <ctype.h>.
(struct coff_symfile_info): Remove stabsect and stabindexsect
fields. Add textaddr, textsize, and stabsects fields.
(coff_locate_sections): Record the address of the .text section,
and total the sizes of all sections with names beginning with
".text". Don't bother to record a .stab.index section (COFF
doesn't use them). Make a linked list of all sections with names
beginning with ".stab".
(coff_symfile_read): Adjust call to coffstab_build_psymtabs for
new parameters.
* dbxread.c (dbx_symfile_read): Use DBX_TEXT_ADDR and
DBX_TEXT_SIZE, rather than getting both from DBX_TEXT_SECT.
(dbx_symfile_init): Set DBX_TEXT_ADDR and DBX_TEXT_SIZE, not
DBX_TEXT_SECT.
(elfstab_build_psymtabs): Likewise.
(stabsect_build_psymtabs): Likewise.
(symbuf_sections, symbuf_left, symbuf_read): New static variables.
(fill_symbuf): If symbuf_sections is not NULL, read symbols from
multiple sections.
(coffstab_build_psymtabs): Remove staboffset and stabsize
parameters. Add textaddr, textsize, and stabsects parameters.
Set DBX_TEXT_ADDR and DBX_TEXT_SIZE, not DBX_TEXT_SECT. Handle
multiple stabs sections.
* os9kread.c (os9k_symfile_read): Use DBX_TEXT_ADDR and
DBX_TEXT_SIZE, rather than getting both from DBX_TEXT_SECT.
(os9k_symfile_init): Set DBX_TEXT_ADDR and DBX_TEXT_SIZE, not
DBX_TEXT_SECT.
PR 7241.
for OSF/1-3.x procfs support.
* configure.in (alpha-dec-osf): Use them when configuring
for OSF/1-3.x.
* configure: Updated.
* target.c: Include <string.h>.
* config/tc-sparc.h (sparc_pic_code): Always declare, not just
when OBJ_ELF.
(TC_RELOC_RTSYM_LOC_FIXUP): Define when OBJ_AOUT.
(tc_fix_adjustable): New definition for OBJ_AOUT.
* config/tc-sparc.c (sparc_pic_code): Always define, not just when
OBJ_ELF.
(md_apply_fix): Adjust reloc addend for OBJ_AOUT and PIC. In
BFD_RELOC_32_PCREL_S2 case, don't increment val for an external
symbol when PIC.
(tc_gen_reloc): Generate different PIC relocs when OBJ_AOUT, as
well as when OBJ_ELF.
(md_shortopts): If OBJ_AOUT, include `k'.
(md_parse_option): If OBJ_AOUT, handle 'k'.
(md_show_usage): Mention -k if OBJ_AOUT, and -KPIC if OBJ_ELF.
(md_pcrel_from): Don't add in size for an external symbol when
PIC.
(KEEPITTYPE): Remove.
(NAME(aout,reloc_type_lookup)): Add cases to the
extended reloc type switch: SPARC_GOT10, SPARC_GOT13, SPARC_GOT22,
SPARC_PC10, SPARC_PC22, SPARC_WPLT30.
(NAME(aout,swap_std_reloc_out)): Don't bother to use stoi when
retrieving KEEPIT value.
(NAME(aout,swap_ext_reloc_out)): Likewise. Also, only add in
output section VMA for section symbols, and check BSF_SECTION_SYM
to control whether to set r_extern to 1.
