constants into PA instructions.
* Put #ifdefs around all signal handling code. Not generally
needed for embedded boards.
* (hppa_fix_call_dummy): Parameterize offsets into call dummy to
allow different dummys to be used by this code. Use
INSTRUCTION_SIZE instead of REGISTER_SIZE for things.
Conditionalize setup of _sr4export fixup. Improve comments.
* config/pa/tm-hppa.h: Define INSTRUCTION_SIZE. Use a different
call dummy if PA_LEVEL_0 is defined. Better comments for call
dummys. Define offsets for LDIL/LDO instructions which load
function addresses.
* config/pa/tm-pro.h: Get rid of signal handling stuff. Define
PA_LEVEL_0 to disable mucking with space regs and such.
unnecessary remoteloadprotocol and remoteloadtype support.
* (expect expect_prompt): Change names to monitor_expect and
monitor_expect_prompt. Make them global.
* (printf_monitor): Change name to monitor_printf. Make global.
* (monitor_read_memory): Flush command echo to avoid parsing
ambiguity with CPU32Bug monitor.
* (monitor_load): Remove remoteloadprotocol and remoteloadtype
support. Call target_ops->load_routine, default to
monitor_load_srec.
* (monitor_load_srec): Remove everything but S-record support.
* monitor.h (monitor_ops): Add load_routine to provide monitor
specific download capability.
* remote-est.c: Clean up copyrights and comments.
* w89k-rom.c: Use new xmodem support.
* xmodem.c xmodem.h: New files to support xmodem downloads.
* rom68k-rom.c remote-est.c: Fix copyrights, add load_routine
entry to monitor_ops.
* cpu32bug-rom.c: New file to support Moto BCC debuggers.
* config/m68k/est.mt (TDEPFILES): Add cpu32bug.o.
* config/pa/hppapro.mt (TDEPFILES): Add xmodem.o.
* Makefile.in (gdbtk.o): Use X11_CFLAGS to provide alternate
locations (per-host) for X11 include files.
* config/pa/hppahpux.mh (XM_CLIBS): Add -L/usr/lib/X11R5 to force
the use of R5 libs. (X11_CFLAGS): Add this to indicate the locs
of the R5 include files.
end-sanitize-gdbtk
* monitor.c monitor.h remote-est.c rom68k-rom.c: Add start of
support for interrupting target.
* monitor.c (monitor_open): Send stop command before doing
anything else.
* (monitor_load_srec): Fix record size calculation to prevent end
of segment from getting trashed.
* rom68k-rom.c: Update to latest version of struct monitor_ops.
* config/sparc/tm-sparc.h (FIX_CALL_DUMMY): Fix byte-order
problems. Makes DOS hosted function calling work.
* sparclite/crt0.s: Define _start to make COFF happy.
* testsuite/config/rom68k.exp (gdb_target_rom68k): Use
$targetname, $serialport and $baud instead of hardwired variables.
* testsuite/gdb.base/{sigall.exp signals.exp}: Skip these if the
target doesn't support signals.
(sunpro_static_transform_name): Renamed from
solaris_static_transform_name.
* config/sparc/tm-sun4os4.h (STATIC_TRANSFORM_NAME):
Define to sunpro_static_transform_name for acc 3.0 compiled
executables.
* findvar.c: Move default def of CANNOT_STORE_REGISTER closer to
the beginning of the code.
* (write_register_gen): New routine. Analogous to
read_register_gen.
* (write_register_bytes): Another rewrite! Make it smarter about
not updating regs with the same value.
* monitor.c (printf_monitor readchar): Use stderr instead of
stdout to output debug info. Also cleanup readchar a little.
* (expect): Make sure that excessive responses are null
terminated.
* (monitor_open): Check for magic number in monitor_ops struct.
Allow multiple commands as init strings. Also, clear all
breakpoints.
* (monitor_resume monitor_wait): Send a command to dump all the
regs for those targets which don't do so when waking up after a
continue command.
* (monitor_wait): Handle excessive response output better.
* (monitor_write_memory): Use block fill, word, and long word
commands (if they exist) to write memory more efficiently.
* General cleanups to use flag bits instead of individual flag
words in monitor_ops struct.
* (monitor_command): Return output from command.
* (monitor_load_srec): Allocate buffer only once. Use alloca.
Wait for load response string instead of using a timeout to start
sending S-records. Fix bug where value of srec_frame shrinks. If
hashmark is set, print `-' for retransmissions. General cleanups.
* (monitor_make_srec): Get rid of S-record default type kludge.
* monitor.h: Use seperate struct for memory and register
read/write commands. Memory commands can come in byte, word,
long, and longlong forms.
* (monitor_ops): Change lots of fields. Generalize some stuff.
Put all flags into flags word. Allow init to be a list of commands.
Add command for clearing all breakpoints, block fill, dumping all
registers.
* remote-est.c: Rewrite to use new monitor conventions.
* config/m68k/est.mt (TDEPFILES): Add monitor.o.
* config/m68k/tm-est.h: Set NUM_REGS to 18.
* testsuite/gdb.base/break.exp: Lots of cleanups. Use gdb_test
more thoroughly.
these routines much smarter about updating registers from the
target, only doing so when absolutely necessary. This really
speeds up register modification on some remote targets.
* monitor.c: More cleanups. Get rid of monitor_load_ascii_srec.
BFD makes this unnecessary. Lots of debugging speedups.
* (expect): NULL terminate return string.
* (monitor_open monitor_supply_register parse_register_dump
monitor_wait monitor_fetch_register): Switch to using GNU regexp
library to parse multi-register displays.
* (monitor_read_memory): Read multiple bytes (up to 16) at once.
* (monitor_create_inferior): Call clear_proceed_status to make run
command notice first breakpoint.
* (monitor_load): Clean up. Reset inferior_pid, set pc to start
address and reset symbol table stuff to make loads put things into
a fresh state.
* (monitor_load_srec): Lower sleep time to 1 second.
* monitor.h (struct monitor_ops): Add register_pattern and
supply_register to monitor_ops.
* rom68k-rom.c: Add new support for handling register dumps.
* config/m68k/tm-m68k.h: Define D0_REGNUM and A0_REGNUM for register
dump handling.
* partial-stab.h: Call it.
* stabsread.c (define_symbol) [STATIC_TRANSFORM_NAME]: Call
STATIC_TRANSFORM_NAME to get the name and use minimal symbols to
get the address.
* sparc-tdep.c (solaris_static_transform_name): New function.
* config/arc/arc.mt: new target makefile for arc processor.
* config/arc/tm-arc.h: new target header for arc processor.
* config/arc/go32.mh: new go32 host makefile for arc processor.
* config/arc/xm-go32.h: new go32 host header for arc processor.
* infrun.c (handle_command, signals_info), infcmd.c
(signal_command): Use it.
* infrun.c, infcmd.c: Update docstrings for these commands.
* target.h (enum target_signal), target.c (signals), target.c
(target_signal_from_host, target_signal_to_host): Add
TARGET_SIGNAL_REALTIME_* and TARGET_SIGNAL_PRIO for lynx.
* config/tm-lynx.h: Define signal numbers for realtime events.
* sparc-tdep.c (sparc_init_extra_frame_info): Set it.
(examine_prologue, sparc_init_extra_frame_info): Use ->frame plus
->sp_offset to compute the address something is saved at, not
->bottom.
* sparc-tdep.c (get_saved_register): New function.
* tm-sparc.h: Define GET_SAVED_REGISTER; don't define
FRAME_FIND_SAVED_REGS, HAVE_REGISTER_WINDOWS or REGISTER_IN_WINDOW_P.
* stack.c (frame_info): Add comment about what to do if
FRAME_FIND_SAVED_REGS is not defined.
* sparc-tdep.c (sparc_init_extra_frame_info): Set ->frame field
here. Get it right for flat frames.
* sparc-tdep.c (sparc_frame_chain): Instead of returning
meaningful value for ->frame field, just return dummy value.
This change is needed because the old code didn't deal with mixed
flat and non-flat frames.
* sparc-tdep.c (sparc_pop_frame): Write SP_REGNUM from
frame->frame, don't go through saved regs for this.
* sparc-tdep.c: Move guts of skip_prologue to new function
examine_prologue. Check for flat prologue and set is_flat.
Provide the caller with the information about what is saved where
if desired.
(skip_prologue, sparc_frame_find_saved_regs): Call examine_prologue.
* sparc-tdep.c: Replace union sparc_insn_layout and anonymous
union in isannulled, which won't work on a little-endian host,
with X_* macros.
* sparc-tdep.c (sparc_frame_saved_pc): If addr == 0, the saved PC
is still in %o7.
* config/sparc/tm-sparc.h: Define INIT_FRAME_PC and
INIT_FRAME_PC_FIRST.
* blockframe.c (get_prev_frame_info): Modify comments regarding
INIT_FRAME_PC_FIRST and the sparc.
* sparc-tdep.c (single_step): Use 4 not sizeof (long) for size of
instruction.
the return type of methods to avoid infinite loops with anonymous
types.
* valops.c (search_struct_field): Handle anonymous unions.
* sparc-tdep.c (sunos4_skip_trampoline_code): New function
to correctly handle steps into -g compiled PIC objects in the
main executable.
* config/sparc/tm-sun4os4.h (SKIP_TRAMPOLINE_CODE):
Redefine to use sunos4_skip_trampoline_code.
* dwarfread.c (DWARF_REG_TO_REGNUM): Provide a default mapping
from DWARF to GDB register numbering.
* dwarfread.c (locval): Use DWARF_REG_TO_REGNUM to map the
register value.
* config/mips/tm-mipsv4.h (DWARF_REG_TO_REGNUM): Define.
