programs based on host or target; this silent failure to configure isn't
appropriate for the separate one-tool releases FSF puts out.
.Sanitize: Remove that code if "for-fsf" is on command line; remove just the
markers if it isn't.
* c-exp.y, m2-exp.y: Call it instead of having our own switch on
the symbol's class.
* valops.c (value_of_variable): Use symbol_read_needs_frame to
decide whether we care about finding a frame.
hold register masks.
(md_begin): Initialize them to zero.
(append_insn): Update mips_gprmask and mips_cprmask. Also add
register variables pinfo and prev_pinfo.
* config/tc-mips.h (mips_gprmask, mips_cprmask): Declare.
* config/obj-ecoff.c (ecoff_frob_file): If TC_MIPS, set gprmask
and cprmask from mips_gprmask and mips_cprmask.
* config/tc-mips.c (GPOPT): Define if OBJ_ECOFF or OBJ_ELF.
(various): Change all references to GP references to apply if
GPOPT, not if OBJ_ECOFF.
(s_change_sec): Rearrange somewhat. If OBJ_ELF, use .rodata
instead of .rdata. If OBJ_ELF, set section flags for .rodata and
.sdata sections.
(s_frame, s_loc, s_mask): Comment out entire functions, rather
than just body. They're not used anyhow.
* configure.in: Set cpu_type to mips for mips*. Accept
mips-*-elfl* and mips-*-elf*.
New functions.
* infrun.c (normal_stop): Don't try and set the pc in the current
frame coredump if there isn't one.
* remote-sim.c (gdbsim_store_register): Don't
SWAP_TARGET_AND_HOST, sim_store_register takes bytes in raw order.
(gdbsim_wait): Set status with WSETSTOP.
* config/h8300/tm-h8300.h (sr_get_debug): Define
* config/i386/i386mach.c: Explain this is for the old (probably
non-functional and/or obsolete) Mach stuff.
* m3-nat.c, config/nm-m3.h,
i386m3-nat.c, mipsm3-nat.c, ns32km3-nat.c,
config/i386/{i386m3.mh,i386m3.mt,tm-i386m3.h,xm-i386m3.h},
config/i386/{i386mk.mh,i386mk.mt,tm-i386mk.h,xm-i386mk.h},
config/mips/{mipsm3.mh,mipsm3.mt,tm-mipsm3.h,xm-mipsm3.h},
config/ns32k/{ns32km3.mh,ns32km3.mt,tm-ns32km3.h,xm-ns32km3.h}:
New files.
* reloc16.c: Add new target entry - bfd_coff_reloc16_estimate,
fix bit rot.
* libcoff.h, libcoff-in.h: declarations. Prototypes
* coffcode.h (bfd_coff_std_swap_table): Add calls to
coff_reloc_16_extra_cases and coff_reloc16_estimate.
(dummy_reloc16_estimate): New function.
* coff-h8300.c (h8300_reloc16_estimate): New function
PSYMTAB_TO_SYMTAB, call target_terminal_ours_for_output first.
This is needed now that wait_for_inferior passes in endaddr.
* infrun.c: Move call to target_terminal_inferior from proceed
to resume.
(align_file_position): New function.
(elf_locate_sh): Disabled function deleted.
(assign_file_positions_for_symtab_and_strtabs): Align position, then place
symtab, then do other sections.
(map_program_segments): Align program header.
(assign_file_positions_except_relocs): Align section headers.
(assign_file_positions_for_relocs): Align relocation sections.
Fixes ld/3584.
beyond the end of the last function in an objfile.
* coff-solib.c (coff_solib_add): Use BFD to get fields from .lib
section.
* infrun.c (wait_for_inferior): Modify test for subroutine entry
to include pc out of bounds of the previous function.
* remote.c (remote_wait): Use strtoul for parsing 'N' message.
Add code to relocate symfile_objfile->sections.
that clears the `inserted' flag for all breakpoints and deletes
any breakpoints which should go away between runs of programs.
* inflow.c (generic_mourn_inferior), infrun.c (init_wait_for_inferior),
remote-es.c (es1800_load), comments in exec.c and corelow.c:
Use it instead of mark_breakpoints_out.
* breakpoint.c (mark_breakpoints_out): Update comment, tm-rs6000.h
uses it in a completely different context.
* breakpoint.c (breakpoint_re_set_one): Add bp_call_dummy case.
regex.c to be consistent across hosts.
* source.c (_initialize_source): Initialize regex to use grep
style syntax as an approximation to POSIX basic regex syntax.
* expr.h (expressionS): New field X_unsigned.
* expr.c (operand): Initialize X_unsigned to 1. Set it to 0 for
unary minus case.
(expr) Fix typo resultP to right if missing operand. Set
X_unsigned to 1 when building new expression.
* read.c (potable): Make "octa" and "quad" call cons, not
big_cons.
(cons): Handle bignums. If given an O_constant (small integer) to
fill a big space, turn it into a bignum.
(parse_bitfield_cons): Set X_unsigned field.
(bignum_low, bignum_limit, bignum_high, grow_bignum, big_cons):
Removed.
* read.h (big_cons): Remove prototype.
* symbols.c (resolve_symbol_value): Don't give a warning if a
symbol in expr_section can not be resolved.
(S_SET_VALUE): Clear X_unsigned.
* write.c (write_object_file): If resolve_symbol_value failed on a
symbol we are writing out, give a warning.
* config/tc-h8500.c (parse_reglist): Set X_unsigned.
* config/tc-hppa.c (md_pseudo_table): Change "octa" and "quad" to
call pa_cons, not pa_big_cons.
(pa_big_cons): Remove.
* config/tc-hppa.h (pa_big_cons): Remove declaration.
* config/tc-i960.c (md_pseudo_table): Change "quad" to call cons,
not big_cons.
understand what it is trying to do, but I suspect it's not doing
it.
* config/ns32k/merlin.mh: Add comment about M_INSTALL.
* config/m88k/{delta88.mh,delta88v4.mh}: Remove M_INSTALL and
M_UNINSTALL; it tries to install a non-existent file gdb.z.
* Makefile.in: Remove M_INSTALL stuff; the above were the only uses.
* alpha-nat.c, alpha-tdep.c, config/alpha/alpha-osf1.mt,
config/alpha/nm-alpha.h, config/alpha/tm-alpha.h, osfsolib.c:
New files.
* Makefile.in: Add new files and dependencies.
* configure.in: Add alpha target.
* config/alpha/alpha-osf1.mh (NATDEPFILES): Add osfsolib.o
* config/alpha/alpha-osf1.mh (MH_CFLAGS): Remove, we can handle
shared libraries now.
* config/alpha/xm-alpha.h: Cleanup, get MAKEVA_* defines right.
* defs.h (CORE_ADDR): Make its type overridable via CORE_ADDR_TYPE,
provide `unsigned int' default.
* breakpoint.c (breakpoint_auto_delete): Delete only if we really
stopped for the breakpoint.
* stabsread.c, stabsread.h (define_symbol): Change valu parameter
to a CORE_ADDR.
* stabsread.c (read_range_type): Handle the case where the lower
bound overflows and the upper doesn't and the range is legal.
* infrun.c (resume): Do not step a breakpoint instruction if
CANNOT_STEP_BREAKPOINT is defined.
* inferior.h (CALL_DUMMY_LOCATION): New variant AT_ENTRY_POINT.
Now that we have the bp_call_dummy breakpoint the call dummy code
is no longer needed. PUSH_DUMMY_FRAME, PUSH_ARGUMENTS and
FIX_CALL_DUMMY can be used to set up everything for the dummy.
The breakpoint for the dummy is set at the entry point and thats it.
* blockframe.c (inside_entry_file, inside_entry_func): Do not stop
backtraces if pc is in the call dummy at the entry point.
* infcmd.c (run_stack_dummy): Handle AT_ENTRY_POINT case. Use
the expected breakpoint pc when setting up the frame for
set_momentary_breakpoint.
* symfile.c (entry_point_address): New function for AT_ENTRY_POINT
support.
* valops.c (call_function_by_hand): Handle AT_ENTRY_POINT case.
* gdb.stabs/configure.in: Use it.
* gdb.stabs/ecoff.mt, weird-ecoff.sed: Change sed script to enable
sharing with alpha.mt, redefine long to word via preprocessor.
* gdb.stabs/weird.def: Conditionally adapt storage layout of v_comb
for alpha.
* gdb.stabs/weird.exp: Handle compilation of weird.s by alpha
native cc.
* gdb.t00/teststrategy.exp: Change expect string so that we
consume the `(xgdb)' from the command echo and from the gdb prompt.
* gdb.t05/expr.exp: xfail "print unsigned int == (~0)" on the alpha.
gdb currently compares all values as long, so this failure probably
applies to any configuration where LONGEST is bigger than a target int.
* gdb.t08/comp-info.c: New file to determine if gdbme is compiled
with gcc.
* gdb.t08/Makefile.in, opaque.exp: Use it. Alpha native cc is unable
to handle opaque pointers, gcc is.
* gdb.t21/gdbme.cc, gdb.t23/gdbme.cc: operator new takes a size_t
as first argument. Include <sys/types.h> and change all operator
new definitions to use size_t.
* gdb.t21/cplusfuncs.exp: Handle changes in output for operator new
now that we use size_t.
