gdb/testsuite/ChangeLog:
2015-07-29 Pedro Alves <palves@redhat.com>
* gdb.gdb/selftest.exp (test_with_self): Update comment. Use
send_inferior and $inferior_spawn_id.
This reverts commit b558ff043d.
This reverts commit 4a11f20659.
The initial import commit failed to retain local changes made to
readline's configure.in (and the commit message erroneously stated that
there were no local changes that needed to be reapplied). Also the
import caused a couple of build errors and a scattering of testsuite
regressions throughout many arches. It's probably better to start over
with this import, hopefully more carefully next time.
This patch syncs our upstream copy of readline from version 6.2 to the
latest version, 7.0 alpha (released July 10 2015).
I essentially copied what was done the last time readline was synced,
when Jan updated to readline 6.2 in 2011:
http://sourceware.org/ml/gdb-patches/2011-05/msg00003.html
Procedure:
1. I extracted the readline-7.0-alpha tarball on top of readline/.
2. I deleted all the new files under doc/ that were deliberately omitted
before.
3. I regenerated readline/configure and readline/examples/rlfe/configure
using autoconf 2.64. No other configure files need regenerating.
4. I updated the function gdb_printable_part in completer.c with a
trivial change made to the readline function it is based off of,
printable_part in readline/complete.c. There is more work to be done in
completer.c to sync it with readline/complete.c, but it is non-trivial
and should probably be done separately anyway.
Local patches that had to be reapplied:
None. readline 7.0 alpha contains all of our local readline
patches.
New files in readline/:
colors.{c,h}
examples/{hist_erasedups,hist_purgecmd,rl-callbacktest,rlbasic}.c
parse-colors.{c,h}
readline.pc.in
configure.ac
Deleted files in readline/:
configure.in
Regressions:
After the sync there is one testsuite regression, the test
"signal SIGINT" in gdb.gdb/selftest.exp which now FAILs. Previously,
the readline 6.2 SIGINT handler would temporarily reinstall the
underlying application's SIGINT handler and immediately re-raise SIGINT
so that the orginal handler gets invoked. But now (since readline 6.3)
its SIGINT handler does not re-raise SIGINT or directly invoke the
original handler; it now sets a flag marking that SIGINT was raised, and
waits until readline explicitly has control to call the application's
SIGINT handler. Anyway, because SIGINT is no longer re-raised from
within readline's SIGINT handler, doing "signal SIGINT" with a stopped
inferior gdb process will no longer resume and then immediately stop the
process (since there is no 2nd SIGINT to immediately catch). Instead,
the inferior gdb process will now just print "Quit" and continue to run.
So with this commit, this particular test case is adjusted to reflect
this change in behavior (we now have to send a 2nd SIGINT manually to
stop it).
Aside from this one testsuite regression, I personally noticed no
regression in user-visible behavior. Though I only tested on x86_64
and on i686 Debian Stretch.
Getting this kind of change in at the start of the GDB 7.11 development
cycle will allow us to get a lot of passive testing from developers and
from bleeding-edge users.
readline/ChangeLog.gdb:
Import readline 7.0 alpha
* configure: Regenerate.
* examples/rlfe/configure: Regenerate.
gdb/ChangeLog:
* completer.c (gdb_printable_part): Sync with readline function
it is based off of.
gdb/testsuite/ChangeLog:
* gdb.gdb/selftest.exp (test_with_self): Update test to now
expect the GDB inferior to no longer immediately stop after
being resumed with "signal SIGINT".
gdb/testsuite/
2015-02-27 Pedro Alves <palves@redhat.com>
* gdb.gdb/complaints.exp (test_initial_complaints): Also accept
"true" for boolean result.
* gdb.gdb/selftest.exp (test_with_self): Also accept full
prototype of main.
This commit does most of the mechanical removal. IOW, the easy part.
procfs.c isn't touched beyond removing a couple obvious bits that are
guarded by a couple macros defined in config/alpha/nm-osf3.h. Going
beyond that for procfs.c & co would be a harder excision that
potentially affects Solaris.
Some comments in the generic alpha code ABIs that may still be
relevant and I wouldn't know what to do with them. That can always be
done on a separate pass, preferably by someone who can test on alpha.
A couple other spots have references to OSF/Tru64 and related files
being removed, but it felt like removing them would make things worse,
not better. We can revisit those when we next need to touch that
code.
I didn't remove a reference to osf in testsuite/lib/future.exp, as I
believe that code is imported from DejaGNU.
Built and tested on x86_64 Fedora 20, with --enable-targets=all.
Tested that building for --target=alpha-osf3 on x86_64 Fedora 20
fails with:
checking for default auto-load directory... $debugdir:$datadir/auto-load
checking for default auto-load safe-path... $debugdir:$datadir/auto-load
*** Configuration alpha-unknown-osf3 is obsolete.
*** Support has been REMOVED.
make[1]: *** [configure-gdb] Error 1
make[1]: Leaving directory `build-osf'
make: *** [all] Error 2
gdb/
2014-10-17 Pedro Alves <palves@redhat.com>
* Makefile.in (ALL_64_TARGET_OBS): Remove alpha-osf1-tdep.o.
(HFILES_NO_SRCDIR): Remove config/alpha/nm-osf3.h.
(ALLDEPFILES): Remove alpha-nat.c, alpha-osf1-tdep.c and
solib-osf.c.
* NEWS: Mention that support for alpha*-*-osf* has been removed.
* ada-lang.h [__alpha__ && __osf__]
(ADA_KNOWN_RUNTIME_FILE_NAME_PATTERNS): Delete.
* alpha-nat.c, alpha-osf1-tdep.c: Delete files.
* alpha-tdep.c (alpha_gdbarch_init): Remove reference to
GDB_OSABI_OSF1.
* config/alpha/alpha-osf3.mh, config/alpha/nm-osf3.h: Delete
files.
* config/djgpp/fnchange.lst (config/alpha/alpha-osf1.mh)
(config/alpha/alpha-osf2.mh, config/alpha/alpha-osf3.mh): Delete.
* configure: Regenerate.
* configure.ac: Remove references to osf.
* configure.host: Handle alpha*-*-osf* in the obsolete hosts
section. Remove all other references to osf.
* configure.tgt: Add alpha*-*-osf* to the obsolete targets section.
Remove all other references to osf.
* dec-thread.c: Delete file.
* defs.h (GDB_OSABI_OSF1): Delete.
* inferior.h (START_INFERIOR_TRAPS_EXPECTED): New unconditionally
defined.
* osabi.c (gdb_osabi_names): Delete "OSF/1".
* procfs.c (procfs_debug_inferior) [PROCFS_DONT_TRACE_FAULTS]:
Delete code.
(unconditionally_kill_inferior)
[PROCFS_NEED_CLEAR_CURSIG_FOR_KILL]: Delete code.
* solib-osf.c: Delete file.
gdb/testsuite/
2014-10-17 Pedro Alves <palves@redhat.com>
* gdb.base/callfuncs.exp: emove references to osf.
* gdb.base/sigall.exp: Likewise.
* gdb.gdb/selftest.exp: Likewise.
* gdb.hp/gdb.base-hp/callfwmall.exp: Likewise.
* gdb.mi/non-stop.c: Likewise.
* gdb.mi/pthreads.c: Likewise.
* gdb.reverse/sigall-precsave.exp: Likewise.
* gdb.reverse/sigall-reverse.exp: Likewise.
* gdb.threads/pthreads.c: Likewise.
* gdb.threads/pthreads.exp: Likewise.
gdb/doc/
2014-10-17 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Ada Tasks and Core Files): Delete mention of Tru64.
(SVR4 Process Information): Delete mention of OSF/1.
This fixes the gdb.gdb tests to be parallel-safe, by ensuring that the
new "xgdb" file ends up in the standard output directory during the
tests.
2013-11-04 Tom Tromey <tromey@redhat.com>
* gdb.gdb/selftest.exp: Use standard_output_file.
* lib/selftest-support.exp (do_self_tests): Use
standard_output_file.
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
Replace -nw option with $INTERNAL_GDBFLAGS in "xgdb" tests to
avoid spurious results due to ~/.gdbinit.
* gdb.gdb/complaint.exp (setup_test): Replace -nw option with
$INTERNAL_GDBFLAGS in run command.
* gdb.gdb/observer.exp (setup_test): Ditto.
* gdb.gdb/selftest.exp (test_with_self): Ditto.
* gdb.gdb/xfullpath.exp (setup_test): Ditto.
* NEWS: Describe new options --init-command=FILE, -ix and
--init-eval-command=COMMAND, -iex.
* main.c (struct cmdarg): New enum items CMDARG_INIT_FILE and
CMDARG_INIT_COMMAND.
(captured_main): New enum items OPT_IX and OPT_IEX. Add
"init-command", "init-eval-command", "ix" and "iex" to the variable
long_options. Handle OPT_IX and OPT_IEX. Process them from CMDARG_VEC.
New comment for CMDARG_FILE and CMDARG_COMMAND processing.
(print_gdb_help): Describe --init-command=FILE, -ix and
--init-eval-command=COMMAND, -iex.
gdb/doc/
* gdb.texinfo (File Options): Describe --init-command=FILE, -ix and
--init-eval-command=COMMAND, -iex.
(Startup): Describe -iex and -ix. Simplify the example
for "set auto-load-scripts off".
gdb/testsuite/
* gdb.gdb/selftest.exp (do_steps_and_nexts): New entry
for cmdarg_vec = NULL. Remove entries for cmdsize = 1, cmdarg = and
ncmd = 0. New entry for VEC_cleanup cmdarg_s.
Consolidate code for displaying per-command time and space statistics to avoid
duplication. Piggyback on cleanups so that statistics get printed even when
commands terminate as a result of an error.
Changelog
* gdb/defs.h (make_command_stats_cleanup): Declare.
(set_display_time): Declare.
(set_display_space): Declare.
* gdb/event-top.c (command_handler): Use make_command_stats_cleanup.
* gdb/main.c (display_time, display_space): Move definitions to utils.c.
(captured_main): Use make_command_stats_cleanup to get start-up
statistics.
Use set_display_time and set_display_space for processing OPT_STATISTICS
case.
* gdb/maint.c (maintenance_time_display): Use set_display_time.
(maintenance_space_display): Use set_display_space.
* gdb/top.c (execute_command): Remove obsolete 'maint time' code.
(command_loop): Use make_command_stats_cleanup.
* gdb/utils.c (struct cmd_stats): Structure for storing initial time
and space usage.
(display_time, display_space): Move definitions here from utils.c.
(set_display_time): New function.
(set_display_space): New function.
(make_command_stats_cleanup): New function.
(report_command_stats): New auxiliary function for
make_command_stats_cleanup.
* gdb/testsuite/gdb.gdb/selftest.exp: Adjust expected message for
capturing start-up runtime.
* gdb.base/annota3.exp: Likewise.
* gdb.base/sigstep.exp (advancei): Fail if we hit the breakpoint
again (instead of timing out).
* gdb.gdb/selftest.exp (do_steps_and_nexts): Add an XFAIL for
GCC bug 26475.
* gdb.java/jmisc.exp: Adjust to work with method signatures including
return types. Add kfails for GDB bugs 2214 and 2215. Move exit
test from jmisc1.exp.
* gdb.java/jmisc1.exp: Delete.
* gdb.java/jprint.exp: Adjust to work with method signatures including
return types.
* gdb.objc/basicclass.exp: Update for gobjc 4.1 debug info.
* gdb.threads/linux-dp.exp: Don't be confused by program output.
* lib/java.exp (compile_java_from_source): Pass the correct type
to target_compile.
* lib/gdb.exp (gdb_file_cmd): Revert the return value to
previous simple convention. Use a global variable to store
information about what was found.
(gdb_run_cmd): Adapt to reverted return value.
* gdb.base/remote.exp: Adapt to reverted return value.
* gdb.gdb/complaints.exp: Likewise.
* gdb.gdb/observer.exp: Likewise.
* gdb.gdb/selftest.exp: Likewise.
* gdb.gdb/xfullpath.exp: Likewise.
With code from Manoj Iyer <manjo@austin.ibm.com>:
* lib/gdb.exp (gdb_file_cmd): Return more information in the
return value. Add an arm for "no debugging symbols found".
Change a stray "error" to "perror".
(gdb_run_cmd): Adapt to new return value.
* gdb.base/remote.exp: Adapt to new return value.
* gdb.gdb/complaints.exp: Likewise.
* gdb.gdb/observer.exp: Likewise.
* gdb.gdb/selftest.exp: Likewise.
* gdb.gdb/xfullpath.exp: Likewise.
