This lets ports assume that the dv-sockser API is always available if
they want to. This way we don't have to do an abort at configure time
and it makes the resulting code a bit simpler.
There are two cases to support, one with an SIB-form (6-byte) LEA,
the other with a 5-byte LEA and a NOP after the call __tls_get_addr.
Gold did not yet support the second case. This patch adds that
support.
gold/
PR gold/18106
* i386.cc (Target_i386::Relocate::tls_gd_to_ie): Fix support for
non-SIB form of lea, with nop after the call.
When calculating the padding necessary to align the end of the relro
segment to a page boundary, gold erroneously ignores the .tdata section
when checking to see if there are any relro sections (so if .tdata
is the only relro section, we fail to align the segment properly),
and erroneously pads the cumulative size of the segment based on
the alignment of .tbss. If there are no relro sections following .tbss,
it then fails to note the padding needed at the end of .tdata.
This patch fixes both problems. is_first_section_relro() will return
true when it sees a .tdata section, and we do not align the cumulative
size until after checking for the .tbss section.
gold/
PR gold/14217
* output.cc (Output_segment::is_first_section_relro): Don't ignore
.tdata section.
(Output_segment::set_section_addresses): Don't align size of relro
segment for .tbss.
Tail optimization of string pools (enabled when linker is run with -O2
or greater) should not be done when the section alignment is greater
than the size of the characters in the strings; otherwise, unaligned
strings may result.
gold/
PR gold/18010
* stringpool.cc (Stringpool_template): Don't optimize if section
alignment is greater than sizeof(char).
This patch fixes INCLUDE directives in script files, so that when
an INCLUDE appears inside a sections block, section commands block,
or memory def block, the contents are parsed in the appropriate
context.
gold/
PR gold/18048
* script-c.h (script_include_directive): Add first_token parameter.
* script.cc (script_include_directive): Add first_token parameter, and
pass it to read_script_file.
* yyscript.y (PARSING_SECTIONS_BLOCK, PARSING_SECTION_CMDS)
(PARSING_MEMORY_DEF): New tokens.
(top): Add new productions for INCLUDE files.
(file_cmd): Replace file_or_sections_cmd with copy of its productions.
Pass PARSING_LINKER_SCRIPT to script_include_directive.
(section_block_cmd): Likewise; pass PARSING_SECTIONS_BLOCK.
(section_cmd): Pass PARSING_SECTION_CMDS.
(file_or_sections_cmd): Remove.
(memory_def): Pass PARSING_MEMORY_DEF.
* testsuite/Makefile.am (memory_test_2): New test.
* testsuite/Makefile.in: Regenerate.
* testsuite/memory_test_inc.t: New script file.
* testsuite/memory_test_inc_1.t.src: New script file.
* testsuite/memory_test_inc_2.t.src: New script file.
* testsuite/memory_test_inc_3.t.src: New script file.
This patch adds support for reading compressed debug info in
shared objects. It actually simplifies things, by moving the
support for compressed sections all the way up to the top-level
Object class, eliminating the need for several virtual methods.
gold/
* dwp.cc (Sized_relobj_dwo::do_section_contents): Delete.
(Sized_relobj_dwo::setup): Build compressed section map.
(Sized_relobj_dwo::do_decompressed_section_contents): Delete.
* dynobj.cc (Sized_dynobj::base_read_symbols): Build compressed
section map.
* object.cc (Sized_relobj_file::Sized_relobj_file): Remove
compressed_sections_ field.
(build_compressed_section_map): Take Object instead of
Sized_relobj_file parameter; add decompress_if_needed parameter.
(Sized_relobj_file::do_find_special_sections): Store compressed
section map in parent Object.
(Sized_relobj_file::do_decompressed_section_contents): Move
implementation to Object::decompressed_section_contents.
(Sized_relobj_file::do_discard_decompressed_sections): Move
implementation to Object::discard_decompressed_sections.
* object.h (build_compressed_section_map): Declare.
(Object::Object): Add compressed_sections_ field.
(Object::section_is_compressed): Move implementation here.
(Object::decompressed_section_contents): De-virtualize.
(Object::discard_decompressed_sections): De-virtualize.
(Object::do_section_is_compressed): Delete.
(Object::do_decompressed_section_contents): Delete.
(Object::set_compressed_sections): New method.
(Object::compressed_sections): New method.
(Object::compressed_sections_): New data member.
(Compressed_section_info, Compressed_section_map): Move to top of file.
(Sized_relobj_file::do_section_is_compressed): Delete.
(Sized_relobj_file::do_decompressed_section_contents): Delete.
(Sized_relobj_file::do_discard_decompressed_sections): Delete.
(Sized_relobj_file::compressed_sections_): Move to Object class.
In a previous patch for PR 14675, to fix a problem with
the .eh_frame section when static linking, I added a step to
finalize the .eh_frame section at the end of the first link
pass. This patch caused PR 18152, where a plugin-claimed
object caused a non-claimed object's layout to be deferred
until replacement files were read. The call to
finalize_eh_frame_section() is happening before the layout of
the deferred objects, leading to the internal error in
do_relocate_sections.
This patch moves the finalization of the .eh_frame section to
after deferred objects have been processed.
gold/
PR gold/14675
PR gold/18152
* gold.cc (queue_middle_tasks): Finalize .eh_frame after laying out
deferred objects.
gdb/ChangeLog:
* tui/tui-io.c (tui_expand_tabs): Reinitialize the column counter
before the second loop, to avoid undefined behavior. Reported by
Anton Blanchard <anton@samba.org>.
This patch introduces a linked list for dynamic attributes of a type.
This is a pre-work for the Fortran dynamic array support. The Fortran
dynamic array support will add more dynamic attributes to a type.
As only a few types will have such dynamic attributes set, a linked
list is more efficient in terms of memory consumption than adding
multiple attributes to main_type.
gdb/ChangeLog:
* gdbtypes.c (resolve_dynamic_type_internal): Adapt
data_location usage to linked list.
(resolve_dynamic_type_internal): Adapt data_location to
linked list.
(get_dyn_prop, add_dyn_prop, copy_dynamic_prop_list): New function.
(copy_type_recursive, copy_type): Add copy of linked list.
* gdbtypes.h (enum dynamic_prop_node_kind): New enum.
(struct dynamic_prop_list): New struct.
* dwarf2read.c (set_die_type): Set data_location data.
/home/pedro/gdb/mygit/src/gdb/i386-sol2-tdep.c: In function ‘const char* i386_sol2_static_transform_name(const char*)’:
/home/pedro/gdb/mygit/src/gdb/i386-sol2-tdep.c:93:29: error: invalid conversion from ‘const char*’ to ‘char*’ [-fpermissive]
p = strrchr (name, '.');
^
gdb:
2015-03-20 Pedro Alves <palves@redhat.com>
* i386-sol2-tdep.c (i386_sol2_static_transform_name): Move "p" to
inner block and make it const.
* machoread.c (get_archive_prefix_len): Make "lparen" const.
/home/pedro/gdb/mygit/src/gdb/xcoffread.c: In function ‘void scan_xcoff_symtab(objfile*)’:
/home/pedro/gdb/mygit/src/gdb/xcoffread.c:2644:33: error: invalid conversion from ‘const char*’ to ‘char*’ [-fpermissive]
p = strchr (namestring, ':');
^
gdb:
2015-03-20 Pedro Alves <palves@redhat.com>
* xcoffread.c (scan_xcoff_symtab): Make "p" and "q" const.
* load.c (rl78_load): If the G10, G13 or G14 flag bits are set in
the ELF header use them to select the proper emulation mode.
* mem.c (mem_put_byte): Use mem_put_hi to store a value into the
MDB register.
(mem_get_byte): Use mem_get_hi to extract a value from the MDB
register.
Hi,
I am looking at the following fails in aarch64-linux,
stepi^M
47 NOP; /* after permanent bp */^M
(gdb) FAIL: gdb.base/bp-permanent.exp: always_inserted=off, sw_watchpoint=0: stepi signal with handler: single-step to handler
the test expects GDB single step into signal handler, but GDB doesn't.
The code in infrun.c:resume
/* Most targets can step a breakpoint instruction, thus
executing it normally. But if this one cannot, just
continue and we will hit it anyway. */
if (gdbarch_cannot_step_breakpoint (gdbarch))
step = 0;
change the intended action from "step" to "continue". The gdbarch method
cannot_step_breakpoint isn't documented well, and I don't get much clue
after explore the history. However, from the comments above,
aarch64-linux can step a breakpoint instruction, so don't need to call
set_gdbarch_cannot_step_breakpoint.
gdb:
2015-03-20 Yao Qi <yao.qi@linaro.org>
* aarch64-tdep.c (aarch64_gdbarch_init): Don't call
set_gdbarch_cannot_step_breakpoint.
On GNU/Linux, this test sometimes FAILs like this:
(gdb) run
Starting program: /home/pedro/gdb/mygit/build/gdb/testsuite/gdb.threads/killed
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib64/libthread_db.so.1".
ptrace: No such process.
(gdb)
Program terminated with signal SIGKILL, Killed.
The program no longer exists.
FAIL: gdb.threads/killed.exp: run program to completion (timeout)
Note the suspicious "No such process" line (that's errno==ESRCH).
Adding debug output we see:
linux_nat_wait: [process -1], [TARGET_WNOHANG]
LLW: enter
LNW: waitpid(-1, ...) returned 18465, ERRNO-OK
LLW: waitpid 18465 received Stopped (signal) (stopped)
LNW: waitpid(-1, ...) returned 18461, ERRNO-OK
LLW: waitpid 18461 received Trace/breakpoint trap (stopped)
LLW: Handling extended status 0x03057f
LHEW: Got clone event from LWP 18461, new child is LWP 18465
LNW: waitpid(-1, ...) returned 0, ERRNO-OK
RSRL: resuming stopped-resumed LWP LWP 18465 at 0x3b36af4b51: step=0
RSRL: resuming stopped-resumed LWP LWP 18461 at 0x3b36af4b51: step=0
sigchld
ptrace: No such process.
(gdb) linux_nat_wait: [process -1], [TARGET_WNOHANG]
LLW: enter
LNW: waitpid(-1, ...) returned 18465, ERRNO-OK
LLW: waitpid 18465 received Killed (terminated)
LLW: LWP 18465 exited.
LNW: waitpid(-1, ...) returned 18461, No child processes
LLW: waitpid 18461 received Killed (terminated)
Process 18461 exited
LNW: waitpid(-1, ...) returned -1, No child processes
LLW: exit
sigchld
infrun: target_wait (-1, status) =
infrun: 18461 [process 18461],
infrun: status->kind = signalled, signal = GDB_SIGNAL_KILL
infrun: TARGET_WAITKIND_SIGNALLED
Program terminated with signal SIGKILL, Killed.
The program no longer exists.
infrun: stop_waiting
FAIL: gdb.threads/killed.exp: run program to completion (timeout)
The issue is that here:
RSRL: resuming stopped-resumed LWP LWP 18465 at 0x3b36af4b51: step=0
RSRL: resuming stopped-resumed LWP LWP 18461 at 0x3b36af4b51: step=0
The first line shows we had just resumed LWP 18465, which does:
void *
child_func (void *dummy)
{
kill (pid, SIGKILL);
exit (1);
}
So if the kernel manages to schedule that thread fast enough, the
process may be killed before GDB has a chance to resume LWP 18461.
GDBserver has code at the tail end of linux_resume_one_lwp to cope
with this:
~~~
ptrace (step ? PTRACE_SINGLESTEP : PTRACE_CONT, lwpid_of (thread),
(PTRACE_TYPE_ARG3) 0,
/* Coerce to a uintptr_t first to avoid potential gcc warning
of coercing an 8 byte integer to a 4 byte pointer. */
(PTRACE_TYPE_ARG4) (uintptr_t) signal);
current_thread = saved_thread;
if (errno)
{
/* ESRCH from ptrace either means that the thread was already
running (an error) or that it is gone (a race condition). If
it's gone, we will get a notification the next time we wait,
so we can ignore the error. We could differentiate these
two, but it's tricky without waiting; the thread still exists
as a zombie, so sending it signal 0 would succeed. So just
ignore ESRCH. */
if (errno == ESRCH)
return;
perror_with_name ("ptrace");
}
~~~
However, that's not a complete fix, because between starting to handle
the resume request and getting that PTRACE_CONTINUE, we run other
ptrace calls that can also fail with ESRCH, and that end up throwing
an error (with perror_with_name).
In the case above, I indeed sometimes see resume_stopped_resumed_lwps
fail in the registers read:
resume_stopped_resumed_lwps (struct lwp_info *lp, void *data)
{
...
CORE_ADDR pc = regcache_read_pc (regcache);
Or e.g., in 32-bit mode, i386_linux_resume has several calls that can
throw too.
Whether to ignore ptrace errors or not depends on context that is only
available somewhere up the call chain. So the fix is to let ptrace
errors throw as they do today, and wrap the resume request in a
TRY/CATCH that swallows it iff the lwp that we were trying to resume
is no longer ptrace-stopped.
gdb/gdbserver/ChangeLog:
2015-03-19 Pedro Alves <palves@redhat.com>
* linux-low.c (linux_resume_one_lwp): Rename to ...
(linux_resume_one_lwp_throw): ... this. Don't handle ESRCH here,
instead call perror_with_name.
(check_ptrace_stopped_lwp_gone): New function.
(linux_resume_one_lwp): Reimplement as wrapper around
linux_resume_one_lwp_throw that swallows errors if the LWP is
gone.
gdb/ChangeLog:
2015-03-19 Pedro Alves <palves@redhat.com>
* linux-nat.c (linux_resume_one_lwp): Rename to ...
(linux_resume_one_lwp_throw): ... this. Don't handle ESRCH here,
instead call perror_with_name.
(check_ptrace_stopped_lwp_gone): New function.
(linux_resume_one_lwp): Reimplement as wrapper around
linux_resume_one_lwp_throw that swallows errors if the LWP is
gone.
(resume_stopped_resumed_lwps): Try register reads in TRY/CATCH and
swallows errors if the LWP is gone. Use
linux_resume_one_lwp_throw instead of linux_resume_one_lwp.
The previous change added an assertion that is catching yet another
bug in count_events_callback/select_event_lwp_callback:
(gdb)
PASS: gdb.mi/mi-nonstop.exp: interrupted
mi_expect_interrupt: expecting: \*stopped,(reason="signal-received",signal-name="0",signal-meaning="Signal 0"|reason="signal-received",signal-name="SIGINT",signal-meaning="Interrupt")[^
]*
/home/pedro/gdb/mygit/src/gdb/gdbserver/linux-low.c:2329: A problem internal to GDBserver has been detected.
select_event_lwp: Assertion `num_events > 0' failed.
=thread-group-exited,id="i1"
Certainly select_event_lwp_callback should always at least find one
event, as it's only called because an event triggered (though we may
have more than one: the point of the function is randomly picking
one).
An LWP that GDB previously asked to continue/step (thus is resumed)
and gets a vCont;t request ends up with last_resume_kind ==
resume_stop. These functions in gdbserver used to filter out events
that weren't going to be reported to GDB; I think the last_resume_kind
kind check used to make sense at that point, but it no longer does.
gdb/gdbserver/ChangeLog:
2015-03-19 Pedro Alves <palves@redhat.com>
* linux-low.c (count_events_callback, select_event_lwp_callback):
No longer check whether the thread has resume_stop as last resume
kind.
inc * rl78.h (E_FLAG_RL78_G10): Redefine.
(E_FLAG_RL78_CPU_MASK, E_FLAG_RL78_ANY_CPU, E_FLAG_RL78_G13
E_FLAG_RL78_G14): New flags.
bin * readelf.c (get_machine_flags): Decode RL78's G13 and G14 flags.
gas * config/tc-rl78.c (enum options): Add G13 and G14.
(md_longopts): Add -mg13 and -mg14.
(md_parse_option): Handle -mg13 and -mg14.
(md_show_usage): List -mg13 and -mg14.
* doc/c-rl78.texi: Add description of -mg13 and -mg14 options.
bfd * elf32-rl78.c (rl78_cpu_name): New function. Prints the name of
the RL78 core based upon the flags.
(rl78_elf_merge_private_bfd_data): Handle merging of G13 and G14
flags.
(rl78_elf_print_private_bfd_data): Use rl78_cpu_name.
(elf32_rl78_machine): Always return bfd_mach_rl78.
Wanting to make sure the new continue-pending-status.exp test tests
both cases of threads 2 and 3 reporting an event, I added counters to
the test, to make it FAIL if events for both threads aren't seen.
Assuming a well behaved backend, and given a reasonable number of
iterations, it should PASS.
However, running that against GNU/Linux gdbserver, I found that
surprisingly, that FAILed. GDBserver always reported the breakpoint
hit for the same thread.
Turns out that I broke gdbserver's thread event randomization
recently, with git commit 582511be ([gdbserver] linux-low.c: better
starvation avoidance, handle non-stop mode too). In that commit I
missed that the thread structure also has a status_pending_p field...
The end result was that count_events_callback always returns 0, and
then if no thread is stepping, select_event_lwp always returns the
event thread. IOW, no randomization is happening at all. Quite
curious how all the other changes in that patch were sufficient to fix
non-stop-fair-events.exp anyway even with that broken.
Tested on x86_64 Fedora 20, native and gdbserver.
gdb/gdbserver/ChangeLog:
2015-03-19 Pedro Alves <palves@redhat.com>
* linux-low.c (count_events_callback, select_event_lwp_callback):
Use the lwp's status_pending_p field, not the thread's.
gdb/testsuite/ChangeLog:
2015-03-19 Pedro Alves <palves@redhat.com>
* gdb.threads/continue-pending-status.exp (saw_thread_2)
(saw_thread_3): New globals.
(top level): Increment them when an event for the corresponding
thread is seen.
(no thread starvation): New test.
If the linux_nat_resume's short-circuits the resume because the
current thread has a pending status, and, a thread with a higher
number was previously stopped for a breakpoint, GDB internal errors,
like:
/home/pedro/gdb/mygit/src/gdb/linux-nat.c:2590: internal-error: status_callback: Assertion `lp->status != 0' failed.
Fix this by make status_callback bail out earlier. GDBserver is
already doing the same.
New test added that exercises this.
gdb/ChangeLog:
2015-03-19 Pedro Alves <palves@redhat.com>
* linux-nat.c (status_callback): Return early if the LWP has no
status pending.
gdb/testsuite/ChangeLog:
2015-03-19 Pedro Alves <palves@redhat.com>
* gdb.threads/continue-pending-status.c: New file.
* gdb.threads/continue-pending-status.exp: New file.
This function (in both GDB and GDBserver) used to consider only
SIGTRAP/breakpoint events, but that's no longer the case nowadays.
gdb/gdbserver/ChangeLog:
2015-03-19 Pedro Alves <palves@redhat.com>
* linux-low.c (select_event_lwp_callback): Update comments to
no longer mention SIGTRAP.
gdb/ChangeLog:
2015-03-19 Pedro Alves <palves@redhat.com>
* linux-nat.c (select_event_lwp_callback): Update comment to no
longer mention SIGTRAP.
PR gas/18087
gas/test * gas/i386/dw2-compress-1.d: Allow the test to pass regardless of
whether the .debug_info section was compressed on not.
bfd * compress.c (bfd_compress_section_contents): Do not define this
function if it is not used.
This fixes several problems with this test.
E.g,. with --target_board=native-extended-gdbserver on x86_64 Fedora
20, I get:
Running /home/pedro/gdb/mygit/src/gdb/testsuite/gdb.base/disp-step-syscall.exp ...
FAIL: gdb.base/disp-step-syscall.exp: vfork: get hexadecimal valueof "$pc" (timeout)
FAIL: gdb.base/disp-step-syscall.exp: vfork: single step over vfork final pc
FAIL: gdb.base/disp-step-syscall.exp: vfork: delete break vfork insn
FAIL: gdb.base/disp-step-syscall.exp: vfork: continue to marker (vfork) (the program is no longer running)
And with --target=native-gdbserver, I get:
Running /home/pedro/gdb/mygit/src/gdb/testsuite/gdb.base/disp-step-syscall.exp ...
KPASS: gdb.base/disp-step-syscall.exp: vfork: single step over vfork (PRMS server/13796)
FAIL: gdb.base/disp-step-syscall.exp: vfork: get hexadecimal valueof "$pc" (timeout)
FAIL: gdb.base/disp-step-syscall.exp: vfork: single step over vfork final pc
FAIL: gdb.base/disp-step-syscall.exp: vfork: delete break vfork insn
FAIL: gdb.base/disp-step-syscall.exp: vfork: continue to marker (vfork) (the program is no longer running)
First, the lack of fork support on remote targets is supposed to be
kfailed, so the KPASS is obviously bogus. The extended-remote board
should have KFAILed too.
The problem is that the test is using "is_remote" instead of
gdb_is_target_remote.
And then, I get:
(gdb) PASS: gdb.base/disp-step-syscall.exp: vfork: set displaced-stepping on
stepi
Program terminated with signal SIGSEGV, Segmentation fault.
The program no longer exists.
(gdb) PASS: gdb.base/disp-step-syscall.exp: vfork: single step over vfork
Obviously, that should be a FAIL. The problem is that the test only
expects SIGILL, not SIGSEGV. It also doesn't bail correctly if an
internal error or some other pattern caught by gdb_test_multiple
matches. The test doesn't really need to match specific exits/crashes
patterns, if the PASS regex is improved, like in ...
... this and the other "stepi" tests are a bit too lax, passing on
".*". This tightens those up to expect "x/i" and the "=>" current PC
indicator, like in:
1: x/i $pc
=> 0x3b36abc9e2 <vfork+34>: syscall
On x86_64 Fedora 20, I now get a quick KFAIL instead of timeouts with
both the native-extended-gdbserver and native-gdbserver boards:
PASS: gdb.base/disp-step-syscall.exp: vfork: delete break vfork
PASS: gdb.base/disp-step-syscall.exp: vfork: continue to syscall insn vfork
PASS: gdb.base/disp-step-syscall.exp: vfork: set displaced-stepping on
KFAIL: gdb.base/disp-step-syscall.exp: vfork: single step over vfork (PRMS: server/13796)
and a full pass with native testing.
gdb/testsuite/
2015-03-18 Pedro Alves <palves@redhat.com>
* gdb.base/disp-step-syscall.exp (disp_step_cross_syscall):
Use gdb_is_target_remote instead of is_remote. Use
gdb_test_multiple instead of gdb_expect. Exit early if
gdb_test_multiple hits its internal matches. Tighten stepi tests
expected output. Fail on exit with any signal, instead of just
SIGILL.
PR binutils/18087
gas * doc/as.texinfo: Note that when gas compresses debug sections the
compression is only performed if it makes the section smaller.
* write.c (compress_debug): Do not compress a debug section if
doing so would make it larger.
tests * gas/i386/dw2-compress-1.d: Do not expect the .debug_abbrev or
.debug_info sections to be compressed.
binu * doc/binutils.texi: Note that when objcopy compresses debug
sections the compression is only performed if it makes the section
smaller.
bfd * coffgen.c (make_a_section_from_file): Only prepend a z to a
debug section's name if the section was actually compressed.
* elf.c (_bfd_elf_make_section_from_shdr): Likewise.
* compress.c (bfd_init_section_compress_status): Do not compress
the section if doing so would make it bigger. In such cases leave
the section alone and return COMPRESS_SECTION_NONE.
Unwind info in system dlls uses almost all possible codes, contrary to unwind
info generated by gcc. A few issues have been discovered: incorrect handling
of SAVE_NONVOL opcodes and incorrect in prologue range checks. Furthermore I
added comments not to forget what has been investigated.
gdb/ChangeLog:
* amd64-windows-tdep.c (amd64_windows_find_unwind_info): Move
redirection code to ...
(amd64_windows_frame_decode_insns): ... Here. Fix in prologue
checks. Fix SAVE_NONVOL operations. Add debug code and comments.
This commit makes support for the "vFile:fstat" packet be detected
by probing rather than using qSupported, for consistency with the
other vFile: packets.
gdb/ChangeLog:
(remote_protocol_features): Remove the "vFile:fstat" feature.
(remote_hostio_fstat): Probe for "vFile:fstat" support.
gdb/doc/ChangeLog:
* gdb.texinfo (General Query Packets): Remove documentation
for now-removed vFile:fstat qSupported features.
gdb/gdbserver/ChangeLog:
* server.c (handle_query): Do not report vFile:fstat as supported.
Hi,
This patch is to support catch syscall on aarch64 linux. We
implement gdbarch method get_syscall_number for aarch64-linux,
and add aarch64-linux.xml file, which looks straightforward, however
the changes to test case doesn't.
First of all, we enable catch-syscall.exp on aarch64-linux target,
but skip the multi_arch testing on current stage. I plan to touch
multi arch debugging on aarch64-linux later.
Then, when I run catch-syscall.exp on aarch64-linux, gcc errors that
SYS_pipe isn't defined. We find that aarch64 kernel only has pipe2
syscall and libc already convert pipe to pipe2. As a result, I change
catch-syscall.c to use SYS_pipe if it is defined, otherwise use
SYS_pipe2 instead. The vector all_syscalls in catch-syscall.exp can't
be pre-determined, so I add a new proc setup_all_syscalls to fill it,
according to the availability of SYS_pipe.
Regression tested on {x86_64, aarch64}-linux x {native, gdbserver}.
gdb:
2015-03-18 Yao Qi <yao.qi@linaro.org>
PR tdep/18107
* aarch64-linux-tdep.c: Include xml-syscall.h
(aarch64_linux_get_syscall_number): New function.
(aarch64_linux_init_abi): Call
set_gdbarch_get_syscall_number.
* syscalls/aarch64-linux.xml: New file.
gdb/testsuite:
2015-03-18 Yao Qi <yao.qi@linaro.org>
PR tdep/18107
* gdb.base/catch-syscall.c [!SYS_pipe] (pipe2_syscall): New
variable.
* gdb.base/catch-syscall.exp: Don't skip it on
aarch64*-*-linux* target. Remove elements in all_syscalls.
(test_catch_syscall_multi_arch): Skip it on aarch64*-linux*
target.
(setup_all_syscalls): New proc.
When src or dst is NULL, the next fread or fwrite will cause a
segmentation fault, so we need to treat it as fatal.
* ldmain.c (main): Use %F instead of %X for einfo.
