In preparation for converting to nrun, call the common functions that
are needed. This doesn't produce any new warnings, and the generated
code should be the same.
This port already was storing its cpu state in the sim_cpu structure, so
converting it over was pretty easy. It is allocating memory itself still,
but we'll fix that up in the future at some point.
The mcore port had a few structs/defines that were never used.
Similarly, the microblaze port, because it was copied from mcore, has
that same dead code, and more. The watchpoint logic was never actually
used. Punt it all.
Since the sim doesn't have any debug support in it, we can only exit
cleanly. But this is still better than nothing.
Change the default microblaze sim to not dump the debug load output
when running. No other does this, and it breaks the testsuite.
If a test doesn't write anything at all to stdout, the current test
framework can't support that. Even if you put a blank output line:
# output:
the setup happily clobbers that with a default pass/fail string.
Tweak the parsing logic so we only set the output to pass/fail when
the test has no output marker.
With newer versions of gcc (5.x), the extern inline we're using with the
sim-arange module no longer works. Since this code really wants the gnu
inline semantics, use that attribute explicitly.
Reported-by: DJ Delorie <dj@redhat.com>
Reported-by: Joel Sherrill <joel.sherrill@oarcorp.com>
Since the testsuite subdir has to handle dynamic arch values already,
there's no real value in requiring arches to opt in to it. Most have
a testsuite now anyways, and we're requiring it in the future.
In preparation for converting to nrun, call the common functions that
are needed. This doesn't produce any new warnings, and the generated
code should be the same.
A lot of cpu state is stored in global variables, as is memory handling.
The sim_size support needs unwinding at some point. But at least this
is an improvement on the status quo.
In preparation for converting to nrun, call the common functions that
are needed. This doesn't produce any new warnings, and the generated
code should be the same.
The sbrk syscall assumes the sbrk region starts after the bss and the
current implementation requires a bss section to exist. Since there
is no requirement for programs to have a bss in general, we want to
drop this check. However, there is still the sbrk syscall that wants
to know about the region.
Since libgloss doesn't actually use the sbrk syscall (it implements
sbrk in its own way), and the sim really shouldn't enforce a specific
memory layout on programs, lets simply delete sbrk support. Now it
always returns an error.
A lot of cpu state is stored in global variables, as is memory handling.
The sim_size support needs unwinding at some point. But at least this
is an improvement on the status quo.
The build line was missing the normal BUILD_xxx flags. Once we added
that, we get warnings that weren't shown before. As we fix those, we
notice that the -d option segfaults because it tries to write readonly
memory. Fix that too as part of the const/prototype clean up.
Simon Marchi:
I think this patch is wrong. Starting with that commit (f30d5c7),
some tests (e.g. mi-break.exp) started to fail for me, because
of gdb segfaulting.
The address of expr is passed to the cleanup. When the cleanup is ran,
expr is no longer in scope, so what is at that address is probably not
safe to use anymore. That's my guess.
gdb/ChangeLog
2015-03-27 Jan Kratochvil <jan.kratochvil@redhat.com>
Revert:
2015-03-26 Jan Kratochvil <jan.kratochvil@redhat.com>
Code cleanup.
* printcmd.c (print_command_1): Move expr variable scope.
GCC 4.4.7 generates the following warning:
| cc1: warnings being treated as errors
| dtrace-probe.c: In function ‘dtrace_process_dof_probe’:
| dtrace-probe.c:416: error: ‘expr’ may be used uninitialized in this function
| make[2]: *** [dtrace-probe.o] Error 1
Later versions (GCC 5) do a better job and don't generate the warning,
but it does not hurt to pre-initialize "expr" to NULL.
gdb/ChangeLog:
* dtrace-probe.c (dtrace_process_dof_probe): Initialize expr to NULL.
Indexes returned for special sections are off by one, i.e. with N+4
sections last one has index N+4 returned which is outside allocated
obstack (at the same time index N is not used at all).
In worst case, if sections obstack is allocated up to end of chunk,
writing last section data will cause buffer overrun and some data
corruption.
Here's output from Valgrind::
==14630== Invalid write of size 8
==14630== at 0x551B1A: add_to_objfile_sections_full (objfiles.c:225)
==14630== by 0x552768: allocate_objfile (objfiles.c:324)
==14630== by 0x4E8E2E: symbol_file_add_with_addrs (symfile.c:1171)
==14630== by 0x4E9453: symbol_file_add_from_bfd (symfile.c:1280)
==14630== by 0x4E9453: symbol_file_add (symfile.c:1295)
==14630== by 0x4E94B7: symbol_file_add_main_1 (symfile.c:1320)
==14630== by 0x514246: catch_command_errors_const (main.c:398)
==14630== by 0x5150AA: captured_main (main.c:1061)
==14630== by 0x51123C: catch_errors (exceptions.c:240)
==14630== by 0x51569A: gdb_main (main.c:1164)
==14630== by 0x408824: main (gdb.c:32)
==14630== Address 0x635f3b8 is 8 bytes after a block of size 4,064 alloc'd
==14630== at 0x4C2ABA0: malloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==14630== by 0x60F797: xmalloc (common-utils.c:41)
==14630== by 0x5E787FB: _obstack_begin (obstack.c:184)
==14630== by 0x552679: allocate_objfile (objfiles.c:294)
==14630== by 0x4E8E2E: symbol_file_add_with_addrs (symfile.c:1171)
==14630== by 0x4E9453: symbol_file_add_from_bfd (symfile.c:1280)
==14630== by 0x4E9453: symbol_file_add (symfile.c:1295)
==14630== by 0x4E94B7: symbol_file_add_main_1 (symfile.c:1320)
==14630== by 0x514246: catch_command_errors_const (main.c:398)
==14630== by 0x5150AA: captured_main (main.c:1061)
==14630== by 0x51123C: catch_errors (exceptions.c:240)
==14630== by 0x51569A: gdb_main (main.c:1164)
==14630== by 0x408824: main (gdb.c:32)
gdb/ChangeLog:
* gdb_bfd.c (gdb_bfd_section_index): Fix off-by-one for special
sections.
Allows .dynbss copy of shared library protected visibility variables
if they are read-only.
To recap: Copying a variable from a shared library into an executable's
.dynbss is an old hack invented for non-PIC executables, to avoid the
text relocations you'd otherwise need to access a shared library
variable. This works with ELF shared libraries because global
symbols can be overridden. The trouble is that protected visibility
symbols can't be overridden. A shared library will continue to access
it's own protected visibility variable while the executable accesses a
copy. If either the shared library or the executable updates the
value then the copy diverges from the original. This is wrong since
there is only one definition of the variable in the application.
So I made the linker report an error on attempting to copy protected
visibility variables into .dynbss. However, you'll notice the above
paragraph contains an "If". An application that does not modify the
variable value remains correct even though two copies of the variable
exist. The linker can detect this situation if the variable was
defined in a read-only section.
PR ld/15228
PR ld/18167
* elflink.c (elf_merge_st_other): Add "sec" parameter. Don't set
protected_def when symbol section is read-only. Adjust all calls.
* elf-bfd.h (struct elf_link_hash_entry): Update protected_def comment.
Exactly like x86_64-*-mingw, SYMBOL_PREFIX should not be set to "_" for
x86_64_*_cygwin
gdb/testuite/ChangeLog:
* lib/gdb.exp (gdb_target_symbol_prefix_flags): Don't set
SYMBOL_PREFIX for x86_64-*-cygwin.
The debugger on Solaris has been broken since the introduction of
DTrace probe support:
(gdb) start
Temporary breakpoint 1 at 0x80593bc: file simple_main.adb, line 4.
Starting program: /[...]/simple_main
[Thread debugging using libthread_db enabled]
No definition of "mutex_t" in current context.
The problem occurs while trying to parse a probe's argument,
and the exception propagates all the way to the top. This patch
fixes the issue by containing the exception and falling back on
using the "long" builtin type if the argument's type could not
be determined.
Also, the parsing should be done using the C language parser.
gdb/ChangeLog:
* dtrace-probe.c (dtrace_process_dof_probe): Contain any
exception raised while parsing the probe arguments.
Force parsing to be done using the C language parser.
* expression.h (parse_expression_with_language): Declare.
* parse.c (parse_expression_with_language): New function.
