* tracepoint.c: Move default definition of
TARGET_VIRTUAL_FRAME_POINTER from here to target.h.
* target.h: Add default definition of TARGET_VIRTUAL_FRAME_POINTER.
* ax-gdb.c (gen_frame_args_address, gen_frame_locals_address):
use TARGET_VIRTUAL_FRAME_POINTER to determine frame pointer.
(gen_trace_for_expr): new argument, address of tracepoint,
gets passed to new_agent_expr and added to struct agent_expr.
(is_nontrivial_conversion): call to new_agent_expr now requires
a dummy argument. (agent_command): use get_current_frame() to
get current PC scope; pass it to gen_trace_for_expr.
* ax-general.c (new_agent_expr): new argument, address of
tracepoint; store it in new field of struct agent_expr.
* ax.h (struct agent_expr): add new field for tracepoint address.
* ax-gdb.h: change prototypes to match above changes.
(CHILL_PRODUCER, etc): Comment out descriptions, not useful.
(IN_SOLIB_CALL_TRAMPOLINE): Rename info from IN_SOLIB_TRAMPOLINE.
(IN_SOLIB_RETURN_TRAMPOLINE): Describe.
(KERNEL_DEBUGGING, MIPSEL): No info about these, remove.
* config/mn10300/tm-mn10300.h (TARGET_VIRTUAL_FRAME_POINTER):
new target macro.
* mn10300-tdep.c (mn10300_virtual_frame_pointer): new function.
* tracepoint.c (encode_actions): Use the new target macro to
determine the virtual frame pointer, for collecting locals/args.
(add_local_symbols, collect_symbol): add a register/offset pair of
arguments so that the virtual frame pointer can be passed in.
Convert mn10300, MIPS and powerpc/rs6000 targets to use
BREAKPOINT_FROM_PC
Delete global variable memory_breakpoint_size. Use BREAKPOINT_FROM_PC
instead.
* symfile.c (deduce_language_from_filename): rewrite so as to
work from a table of filename extensions, modifiable by the user.
(filename_language_table): new data structure.
(set_ext_lang_command): new function for new command, "set
extension-language". (info_extension_language_command): new
function for new command "info extension-languages".
(add_filename_language, init_filename_language_table): new
support functions for the above.
* language.c (language_enum): new function. Support for above.
* coffread.c (coff_symtab_read): Discard C_LABEL's that are not
function entry points, to avoid getting them in the stack dump
instead of the actual function.
without NAT_FILE definition, configure will assume that GDB cannot
run native.
* config/m68k/nm-delta68.h (KERNEL_U_SIZE): New macro.
* delta68-nat.c (kernel_u_size): New function.
* rdi-share/host.h: if compiling under Cygwin, make sure new
preprocessor define is defined. Define it if not.
* rdi-share/hostchan.h: ditto
* rdi-share/aclocal.m4: regenerate
* rdi-share/configure: regenerate
* rdi-share/host.h: if compiling under Cygwin, make sure new
preprocessor define is defined. Define it if not.
* rdi-share/aclocal.m4: regenerate
* rdi-share/configure: regenerate
* gdbtk-cmds.c: Can't start using new API names yet. Switch
back
to calling cygwin32_ funcs until some time has passed...
* gdbtk.c: Ditto. Also, include sys/cygwin.h for Cygwin,
instead
of providing own proto.
Changes to account for name change from cygwin32 to cygwin and
clean up Win32-related ifdefs.
* configure.tgt: check for cygwin* instead of cygwin32.
New cygwin gdb_target variable loses the "32".
* configure.host: check for cygwin* instead of cygwin32.
New cygwin gdb_host variable loses the "32".
* configure.in: test __CYGWIN__ instead of __CYGWIN32__,
rename gdb_cv_os_cygwin32 variable to drop the "32". Call
AM_EXEEXT instead of AC_EXEEXT since that isn't in a released
autoconf yet.
* configure: regenerate.
* main.c: drop "32" from cygwin_ funcs, include sys/cygwin.h
where
cygwin path conv protos live, instead of adding a proto here
for
them here.
* {main.c, ser-tcp.c, ser-unix.c, top.c}: check __CYGWIN__
instead of __CYGWIN32__.
* source.c: thoughout, check _WIN32 instead of WIN32.
* config/i386/cygwin32.mh: delete.
* config/i386/cygwin.mh: new file, was cygwin32.mh.
* config/i386/cygwin32.mt: delete.
* config/i386/cygwin.mt: new file, was cygwin32.mt.
* config/i386/tm-cygwin32.h: delete.
* config/i386/tm-cygwin.h: new file, was tm-cygwin32.h.
* config/i386/xm-cygwin32.h: delete.
* config/i386/xm-cygwin.h: new file, was xm-cygwin32.h.
* config/i386/xm-windows.h: #include xm-cygwin.h now.
* config/powerpc/cygwin32.mh: delete.
* config/powerpc/cygwin.mh: new file, was cygwin32.mh.
* config/powerpc/cygwin32.mt: delete.
* config/powerpc/cygwin.mt: new file, was cygwin32.mt.
* config/powerpc/tm-cygwin32.h: delete.
* config/powerpc/tm-cygwin.h: new file, was tm-cygwin32.h.
* config/powerpc/xm-cygwin32.h: delete.
* config/powerpc/xm-cygwin.h: new file, was xm-cygwin32.h.
* rdi-share/aclocal.m4: regenerate with aclocal.
* rdi-share/configure: regenerate with autoconf.
* rdi-share/{host.h, hostchan.c, hostchan.h, serdrv.c,
* serpardr.c,
unixcomm.c}: check __CYGWIN__ instead of __CYGWIN32__.
multithread debugging.
(remote_get_threadlist) : get a partial list of threads
(remote_threadlist_iterator) : Step through all the threads
(init_remote_threadtests) : Optional builtin unit test commands.
* thread.c (bind_target_thread_vector) : Implementa a more dynamic
way of accessing target specific thread info functions than
FIND_NEW_THREADS.
(target_thread_info) : Function to get extended thread information.
* gdbthread.h : Export internal data structures corresponding to
external detailed thread info response. This is more like a 'ps'
command than what might be expected of host based threads. This
is for embedded systems.
* console.tcl (complete): I added the ability to pass from_tty
from gdb_cmd to the underlying commands. Pass 1 when the
command is invoked from the console.
* interface.tcl (gdbtk_tcl_tstart, gdbtk_tcl_tstop): Run the
src window's do_tstop method rather than manipulating the
widgets by hand.
* src.tcl (build_win): Redo the packing so that the function
combobox doesn't push all the other combo-boxes off the screen
if it has a very long function name in it.
* srcbar.tcl (do_tstop): Added a mode that just changes the
GUI, which can be called from console hooks.
* srctextwin.tcl: Fixed some bugs I introduced in setting
breakpoints in the assembly & mixed mode windows. Dropped
the notion of joint breakpoint images for lines that have
breakpoints of two separate types. Too fragile.
Also added the "dont_change_appearance" flag, used in the
continue_to_here method to tell the GUI not to reflect the
temporary disabling of all the breakpoints.
* toolbar.tcl (insert_buttons): Added a little more error-checking.
Thu Nov 12 15:20:15 1998 Jim Ingham <jingham@cygnus.com>
* gdbtk-cmds.c (gdb_cmd): Added an optional second argument to the
gdb_cmd, which is from_tty. This is passed to the gdb command
parser. It is 0 by default, and the console window passes 1.
* gdbtk-cmds.c: moved disassemble_from_exec from gdbtk.c to gdbtk-cmds.c
with all the other link-var'ed variables
* gdbtk-hooks.c (gdbtk_trace_find): Only run the hook functions if
we are called from_tty.
* gdbtk-hooks.c (gdbtk_trace_start_stop): Set the trace buttons
from a trace_start_command callback rather than doing it as a
special case in gdb_cmd.
* tracepoint.c (tstart_command, tstop_command): Add call to
trace_start_stop_hook here.
Wed Nov 4 12:41:42 1998 Jim Ingham <jingham@cygnus.com>
* actiondlg.tcl: Get the stack collect string from an instance
variable. Need to implement some way to get this from the
target settings...
* global_pref.tcl (toggle_tracing_mode): Add & remove hooks
when you go in and out of tracing mode. Also reset the B1
behavior when you leave tracing mode
* interface.tcl (gdbtk_tcl_trace_find_hook): Added the trace
find hook, so you can switch the GUI state when the tfind
command is used to enter & leave browse mode.
* srcbar.tcl (constructor, destructor trace_find_hook): Added
the trace_find_hook to the source toolbar, and added the
necessary hooks to handle it.
* srctextwin.tcl (trace_find_hook): Added a trace find hook to
the sourcebar as well.
* stack.tcl (update): protect against errors in gdb_stack.
Just return "NO STACK" if we couldn't get it.
* src_pref.tcl (constructor, cancel): Put all the saved prefs
in an array, on cancel, see if any have changed and only
rebuild the window if there have been changes.
Mon Nov 2 13:24:10 1998 Jim Ingham <jingham@cygnus.com>
* bp.tcl (update): The hook function was passing more
arguments than this function expected.
Mon Nov 2 11:16:10 1998 Jim Ingham <jingham@cygnus.com>
* toolbar.tcl: Added Tdump image.
Fri Oct 30 17:36:05 1998 Jim Ingham <jingham@cygnus.com>
* src.tcl (set_execution_status): Changed status messages,
tracing is not the same as async debugging...
Fri Oct 30 17:06:31 1998 Jim Ingham <jingham@cygnus.com>
* bp.tcl (bp_all): Only remove tracepoints in the tracepoint
window, and breakpoints in the breakpoint window.
Fri Oct 30 11:22:23 1998 Jim Ingham <jingham@cygnus.com>
* actiondlg.tcl: Added special tag "Collect Stack". This
still needs to get hooked into the target database to deal
with targets that need to do something special to collect the
stack. Also moved some repeated code into loops.
* main.tcl (source_file): Source in a file of gdb commands.
* srcbar.tcl (constructor): Added source file menu entry, and
made stack buttons belong to both the Trace & Control classes.
* srctextwin.tcl (constructor): One too many separators in the
trace trace popup menu.
* tclIndex: regenerated.
* tfind_args.tcl: Added "tfind frame"
* toolbar.tcl (create_button): Allow a button to belong to
more than one class.
* toolbar.tcl (enable_ui): Eliminate redundant code, and allow
a button to belong to more than one class.
* toolbar.tcl (create_trace_menu): Added save tracepoints &
Tfind frame menu items.
* tracedlg.tcl: Added deletion of actions, and fixed a
the whiile-stepping combobox callback for the new combobox.
* util.tcl (save_trace_commands): new proc.
1998-10-29 Michael Snyder <msnyder@demo-laptop2.cygnus.com>
* target.tcl: add /dev/cua0 for Linux.
Tue Oct 27 13:46:03 1998 Jim Ingham <jingham@cygnus.com>
* Many little bug fixes all over in order to get tracing to work
along with normal program control.
* toolbar.tcl: Rewrote much of the code here to put commonly
used code into functions, and clean up adding menus and
buttons. Added the ability to disable particular menu items,
not just whole menus. Added the ability to delete and insert
buttons on the fly.
* srcbar.tcl: Pushed the changes to toolbar.tcl into this file.
* srctextwin.tcl: Changed the code dealing with breakpoints
and tracepoints to use the text tags more consistently. Use
only one set of menus for the whole widget, rather than having
a separate set for the SRC+ASM case. Rewrote a lot of the
code to separate out the tracing & program control functions.
* interface.tcl (gdbtk_tcl_breakpoint): pass more information
to the scrtextwin when a breakpoint changes state, so it can
do the right thing without having to guess...
* tracedlg.tcl (build_win): get the packing right so the
window expands correctly.
* main.tcl: do_tstop -> tstop, do_tstart -> tstart to avoid
confusion with the methods in ScrBar.tcl.
* prefs.tcl: Added two new preferences B1_Behavior to control
whether B1 sets breakpoints or tracepoints.
* src_prefs.tcl: Put in support for the B1_Behavior.
* global_prefs.tcl: Put back tracing checkbox.
* tdump.tcl: Fixed an incorrect (1 rather than 1.0) text
widget line specification.
* tfind_args.tcl (build_win): Bind return in the entry to the
OK button. Clear the entry field if the Type has changed.
* utils.tcl: Added comments for the debug commands.
* watch.tcl (build_win): Flash the OK button before invoking it.
Wed Nov 4 12:41:42 1998 Jim Ingham <jingham@cygnus.com>
* gdbtk-cmds.c (gdb_set_bp_addr): Pass the type, enable & thread
to gdbtk_tcl_breakpoint.
* gdbtk-hooks.c (gdbtk_trace_find): Added this function. It is
the hook function for tfind commands.
* tracepoint.c (trace_find_command): Added the trace_find_hook,
run when you do trace_find_command.
* tracepoint.h: Define the trace_find_hook.
Mon Nov 2 11:16:10 1998 Jim Ingham <jingham@cygnus.com>
* gdbtk-cmds (gdb_get_tracepoint_info): Demangle C++ function names.
Fri Oct 30 11:22:23 1998 Jim Ingham <jingham@cygnus.com>
* gdbtk-cmds (gdb_get_tracepoint_info): Fixed typo.
Wed Oct 28 10:14:33 1998 Jim Ingham <jingham@cygnus.com>
* gdbtk-cmds.c: Made the bdtypes & bpdisp arrays shared so they
could be used in gdbtk-hooks.c (breakpoint_notify).
Also fixed a few error messages to actually print the bp number
rather that #%d...
* gdbtk-hooks.c (breakpoint_notify): pass more of the information
about the breakpoint into the Tcl command, so it does not have to
try and guess about information we have on the C side.
* gdbtk.h: Export the bptypes & pbdisp arrays.
which define CRLF_SOURCE_FILES.
* win32-nat.c: 1) Add thread support, 2) fix ability to attach to
a running process, and 3) implement limited support for cygwin
signals.
(thread_rec): New function.
(child_add_thread): Ditto.
(child_init_thread_list): Ditto.
(child_delete_thread): Ditto.
(do_child_fetch_inferior_registers): Ditto.
(do_child_store_inferior_registers): Ditto.
(handle_output_debug_string): Ditto.
(child_fetch_inferior_registers): Use do_* function to perform
operation.
(child_store_inferior_registers): Ditto.
(child_continue): Ditto.
(child_thread_alive): Ditto.
(cygwin_pid_to_str): Ditto.
(handle_load_dll): Reorganize, add first attempt at reading
dll names from attached processes. Change info messages to provide
more information when dll is already loaded.
(handle_exception): Changes mandated by new thread-aware structures.
(child_wait): Track thread creation/destruction. Handle cygwin
signals.
(child_create_inferior): Ditto.
(child_resume): Ditto.
(child_kill_inferior): Ditto. Close child process handle to avoid a
handle leak.
(child_ops): Fill out child_ops fields that deal with threads.
* config/i386/tm-cygwin32.h: Declare function and macro needed
for converting a cygwin "pid" to a string.
* config/i386/xm-cygwin32.h: define HAVE_SIGSETMASK as 0 since
sigsetmask is not defined in cygwin.
(ice_stepi): Use do_gdb to step properly.
(ice_nexti): Use do_gdb to step properly.
(view_source): Correct call to src window's location for new version.
