gas/
* config/tc-mips.c (s_option): Sanitize `.option picX'
pseudo-op.
* testsuite/gas/mips/option-pic-1.d: New test.
* testsuite/gas/mips/option-pic-2.l: New list test.
* testsuite/gas/mips/option-pic-1.s: New test source.
* testsuite/gas/mips/option-pic-2.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
gas/
* config/tc-mips.c (s_option): Reject `.option picX' if VxWorks
PIC.
* testsuite/gas/mips/option-pic-vxworks-1.l: New list test.
* testsuite/gas/mips/option-pic-vxworks-2.l: New list test.
* testsuite/gas/mips/option-pic-vxworks-1.s: New test source.
* testsuite/gas/mips/option-pic-vxworks-2.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
There are a few small changes needed to make it work with a real remote
target.
- Remove the [is_remote target] check.
- Remove soname setting when building the lib, it's done by default now
anyway.
- In the compilation of the executable, pass the shared lib using the
shlib option, so that RPATH is set.
- Download the program to the target using gdb_remote_download, and
record the remote path. Remove loading of the program using
gdb_load_shlibs, which was not really appropriate anyway.
- Run the remote path through readlink (see comment in the code).
- Start gdbserver with the remote path.
Also, don't set executable and objfile variables, as they are unused.
Tested with native, native-gdbserver, native-extended-gdbserver, and a
remote gdbserver.
gdb/testsuite/ChangeLog:
* gdb.server/solib-list.exp: Remove is_remote check.
Pass shlib= to gdb_compile. Don't link shared library with
-soname. Call gdb_remote_download instead of gdb_load_shlibs.
Run binary filename through "readlink -f" on the target.
Commit 7817ea4614 (Improve gdb_remote_download, remove gdb_download)
caused:
FAIL: gdb.server/solib-list.exp: non-stop 0: target extended-remote (timeout)
FAIL: gdb.server/solib-list.exp: non-stop 0: continue (the program is no longer running)
FAIL: gdb.server/solib-list.exp: non-stop 0: p libvar
FAIL: gdb.server/solib-list.exp: non-stop 1: target extended-remote (timeout)
FAIL: gdb.server/solib-list.exp: non-stop 1: continue (the program is no longer running)
FAIL: gdb.server/solib-list.exp: non-stop 1: p libvar
gdb.log shows:
system interpreter is: /lib64/ld-linux-x86-64.so.2
...
spawn ../gdbserver/gdbserver --once :2347 /home/pedro/brno/pedro/gdb/mygit/build/gdb/testsuite/outputs/gdb.server/solib-list/ld-linux-x86-64.so.2 /home/pedro/brno/pedro/gdb/mygit/build/gdb/testsuite/outputs/gdb.server/solib-list/solib-list
Process /home/pedro/brno/pedro/gdb/mygit/build/gdb/testsuite/outputs/gdb.server/solib-list/ld-linux-x86-64.so.2 created; pid = 18637
Cannot exec /home/pedro/brno/pedro/gdb/mygit/build/gdb/testsuite/outputs/gdb.server/solib-list/ld-linux-x86-64.so.2: No such file or directory.
...
The test copied the interpreter to the outputs directory, however
ld-linux-x86-64.so.2 is a relative symlink that when copied points
nowhere:
$ ls -l testsuite/outputs/gdb.server/solib-list/
total 52
-rwxrwxr-x. 1 pedro pedro 13450 Apr 7 10:52 gdb.log
-rw-rw-r--. 1 pedro pedro 1512 Apr 7 10:52 gdb.sum
lrwxrwxrwx. 1 pedro pedro 10 Apr 7 11:39 ld-linux-x86-64.so.2 -> ld-2.22.so
-rwxrwxr-x. 1 pedro pedro 9464 Apr 7 11:39 solib-list
-rw-rw-r--. 1 pedro pedro 3472 Apr 7 11:39 solib-list-lib.c.o
-rw-rw-r--. 1 pedro pedro 2760 Apr 7 11:39 solib-list.o
-rwxrwxr-x. 1 pedro pedro 9232 Apr 7 11:39 solib-list.so
The copying comes from gdbserver_spawn ->
gdbserver_download_current_prog -> gdb_remote_download.
There's actually no need to download the interpreter to the target -
it's part of the target system/environment. So fix this by making the
test just not use gdb_load (and gdb_file_cmd as consequence) at all,
and instead pass the interpreter filename to gdbserver as an argument.
gdb/testsuite/ChangeLog:
2016-04-08 Pedro Alves <palves@redhat.com>
* gdb.server/solib-list.exp: Don't use gdb_load. Instead pass the
interpreter filename as argument to gdbserver_spawn.
* lib/gdbserver-support.exp (gdbserver_download_current_prog):
Return empty if $last_loaded_file does not exist.
I did a quick pass over value.c and value.h and made some of the accessor methods'
pass-by-reference parameters const-correct. Besides the obvious benefits, this is
required if we want to use them on values that are already declared as const
(such as the parameters to lval_funcs).
There's probably a lot more stuff that can be made const, here and elsewhere.
gdb/ChangeLog:
2016-04-08 Martin Galvan <martin.galvan@tallertechnologies.com>
* value.c (value_next): Make pass-by-reference parameters const-correct.
(value_parent): Likewise.
(value_enclosing_type): Likewise.
(value_lazy): Likewise.
(value_stack): Likewise.
(value_embedded_offset): Likewise.
(value_pointed_to_offset): Likewise.
(value_raw_address): Likewise.
(deprecated_value_modifiable): Likewise.
(value_free_to_mark): Likewise.
(value_release_to_mark): Likewise.
(internalvar_name): Likewise.
(readjust_indirect_value_type): Likewise.
(value_initialized): Likewise.
* value.h (value_next): Likewise.
(value_parent): Likewise.
(value_enclosing_type): Likewise.
(value_lazy): Likewise.
(value_stack): Likewise.
(value_embedded_offset): Likewise.
(value_pointed_to_offset): Likewise.
(value_raw_address): Likewise.
(deprecated_value_modifiable): Likewise.
(value_free_to_mark): Likewise.
(value_release_to_mark): Likewise.
(internalvar_name): Likewise.
(readjust_indirect_value_type): Likewise.
(value_initialized): Likewise.
on CentOS-7.2 I get
Running /home/jkratoch/redhat/gdb-test-reg/gdb/testsuite/gdb.base/jit.exp ...
FAIL: gdb.base/jit.exp: one_jit_test-1: continue to breakpoint: break here 2 (the program exited)
FAIL: gdb.base/jit.exp: one_jit_test-2: continue to breakpoint: break here 2 (the program exited)
FAIL: gdb.base/jit.exp: attach: one_jit_test-2: continue to breakpoint: break here 2 (the program exited)
FAIL: gdb.base/jit.exp: attach: one_jit_test-2: break here 2: set var wait_for_gdb = 1
FAIL: gdb.base/jit.exp: attach: one_jit_test-2: break here 2: detach (the program is no longer running)
FAIL: gdb.base/jit.exp: attach: one_jit_test-2: break here 2: attach
FAIL: gdb.base/jit.exp: attach: one_jit_test-2: break here 2: set var wait_for_gdb = 0
FAIL: gdb.base/jit.exp: PIE: one_jit_test-1: continue to breakpoint: break here 2 (the program exited)
Running /home/jkratoch/redhat/gdb-test-reg/gdb/testsuite/gdb.base/jit-so.exp ...
FAIL: gdb.base/jit-so.exp: one_jit_test-1: continue to breakpoint: break here 2 (the program exited)
FAIL: gdb.base/jit-so.exp: one_jit_test-2: continue to breakpoint: break here 2 (the program exited)
since:
85af34ee0211eedf8d30a5c44dfc59dddf8b512a is the first bad commit
commit 85af34ee0211eedf8d30a5c44dfc59dddf8b512a
Author: Pedro Alves <palves@redhat.com>
Date: Thu Mar 31 19:28:47 2016 +0100
Add regression test for PR gdb/19858 (JIT code registration on attach)
The compiled code's .debug_line is wrong (for the simplistic approach of GDB
to put a breakpoint on the first address belonging to that source line) and so
GDB misses the breakpoint at the last line:
WAIT_FOR_GDB; return 0; /* gdb break here 2 */
Most of the patch is just about reindentation, no changes there.
gdb/testsuite/ChangeLog
2016-04-08 Jan Kratochvil <jan.kratochvil@redhat.com>
Fix compatibility with gcc-4.8.5-4.el7.x86_64.
* gdb.base/jit-main.c: Use exit after usage.
* ldlang.c (print_output_section_statement): Show minfo size
in target machine address units.
(print_reloc_statement): Likewise.
(print_padding_statement): Likewise.
(print_data_statement): Likewise. Ensure minimum print_dot
increment of one address unit.
$ GDBHISTFILE=/tmp/gdbhistfile runtest gdb.base/gdbhistsize-history.exp gdb.base/gdbinit-history.exp
Running ./gdb.base/gdbinit-history.exp ...
FAIL: gdb.base/gdbinit-history.exp: home=gdbinit-history/unlimited gdbhistsize=1000: show commands
FAIL: gdb.base/gdbinit-history.exp: home=gdbinit-history/unlimited gdbhistsize=foo: show commands
Running ./gdb.base/gdbhistsize-history.exp ...
FAIL: gdb.base/gdbhistsize-history.exp: histsize=: show commands
FAIL: gdb.base/gdbhistsize-history.exp: histsize=20: show commands
FAIL: gdb.base/gdbhistsize-history.exp: histsize= 20 : show commands
FAIL: gdb.base/gdbhistsize-history.exp: histsize=-5: show commands
FAIL: gdb.base/gdbhistsize-history.exp: histsize=not_an_integer: show commands
FAIL: gdb.base/gdbhistsize-history.exp: histsize=10zab: show commands
FAIL: gdb.base/gdbhistsize-history.exp: histsize=-5ab: show commands
FAIL: gdb.base/gdbhistsize-history.exp: histsize=99999999999999999999999999999999999: show commands
FAIL: gdb.base/gdbhistsize-history.exp: histsize=50: show commands
This happens for my setup due to my:
$ grep GDB ~/.bashrc
export GDBHISTFILE="$HOME/.gdb_history"
gdb/testsuite/ChangeLog
2016-04-07 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.base/gdbhistsize-history.exp: Save and unset GDBHISTFILE and
GDBHISTSIZE prior to the tests.
* gdb.base/gdbinit-history.exp: Likewise.
Commit 6e774b13c3 (Make ftrace tests work with remote targets) made
a few gdb.compile/compile.exp tests disappear:
-PASS: gdb.compile/compile.exp: call shared library function
-PASS: gdb.compile/compile.exp: expect 1
-PASS: gdb.compile/compile.exp: modify shared library variable
-PASS: gdb.compile/compile.exp: expect 15
This is because the test uses ldflags instead of using the shlib
option, so it misses linking with -rpath, resulting in:
(gdb) run
Starting program: .../compile/compile-shlib
.../compile/compile-shlib: error while loading shared libraries: compile-shlib.so: cannot open shared object file: No such file or directory
[Inferior 1 (process 18014) exited with code 0177]
We were missing a gdb_load_shlibs call, which is needed for remote
testing.
gdb/testsuite/ChangeLog:
2015-04-07 Pedro Alves <palves@redhat.com>
* gdb.compile/compile.exp: Use gdb_compile with "shlib=" option
instead of build_executable. Use gdb_load_shlibs.
Add some new control instructions to the opcodes library, and a new test
for these new instructions to the assembler. The new instructions use
an instruction flag longer than any seen before (on arc), and so the max
flag length is extended to accommodate this.
gas/ChangeLog:
* config/tc-arc.h (MAX_FLAG_NAME_LENGTH): Increase to 7.
* testsuite/gas/arc/nps400-2.d: New file.
* testsuite/gas/arc/nps400-2.s: New file.
opcodes/ChangeLog:
* arc-nps400-tbl.h: Add schd, sync, and hwschd instructions.
* arc-opc.c (arc_flag_operands): Add new flags.
(arc_flag_classes): Add new classes.
This commit completes support for having multiple instructions with the
same mnemonic in non-contiguous blocks within the arc_opcodes table.
The commit adds an iterator mechanism for the arc_opcode_hash_entry
structure, which is then used in find_opcode_match to consider all
arc_opcode entries with the same mnemonic, even when these instructions
are stored in non-contiguous blocks.
I extend the comment on the arc_opcodes table to discuss how entries
within the table are organised, and to mention how instructions can be
split into multiple groups if needed, but that the table is still
searched in table order.
There should be no user visible changes after this commit.
gas/ChangeLog:
* config/tc-arc.c (struct arc_opcode_hash_entry_iterator): New
structure.
(arc_opcode_hash_entry_iterator_init): New function.
(arc_opcode_hash_entry_iterator_next): New function.
(find_opcode_match): Iterate over all arc_opcode entries
referenced by the arc_opcode_hash_entry passed in as a parameter.
opcodes/ChangeLog:
* arc-opc.c (arc_opcodes): Extend comment to discus table layout.
Building on earlier commits, this commit moves along support for having
multiple arc_opcode entries in the arc_opcodes table that have the same
mnemonic (name) field, but are not stored in a contiguous block in the
table.
In this commit we support looking up the arc_opcode_hash_entry from the
hash table, and passing this along to the find_opcode_match function,
which then finds the specific arc_opcode that we're assembling. We
still don't actually support the multiple chains of arc_opcode entries
in this commit, but the limitation is now isolated to the
find_opcode_match function.
There is no user visible change after this commit.
gas/ChangeLog:
* config/tc-arc.c (arc_find_opcode): Now returns
arc_opcode_hash_entry pointer.
(find_opcode_match): Update argument type, extract arc_opcode from
incoming arc_opcode_hash_entry.
(find_special_case_pseudo): Update return type.
(find_special_case_flag): Update return type.
(find_special_case): Update return type.
(assemble_tokens): Lookup arc_opcode_hash_entry based on
instruction mnemonic, then use find_opcode_match to identify
specific arc_opcode.
The arc assembler builds a hash table to hold references to arc_opcode
entries in the arc_opcodes table. This hash assumes that each mnemonic
will always appear in a contiguous blocks within the arc_opcodes table;
all ADD instruction will be together, all AND instructions will likewise
be together and so on.
The problem with this is that as different variations of arc are added,
then it is often more convenient to split instructions apart, so all the
base ADD instructions are together, but, variants of ADD specific to one
variation of arc are grouped with other instructions specific to that
arc variant. The current data structures don't support splitting the
instructions in this way.
This commit is a first step towards addressing this limitation. In this
commit the hash table that currently holds arc_opcode pointers directly,
instead holds a pointer to a new, intermediate, data structure. This
new data structure holds the pointer to the arc_opcode. In this way, we
can, in the future support having the intermediate structure hold
multiple pointers to different arc_opcode groups.
There should be no visible functional change after this commit.
gas/ChangeLog:
* config/tc-arc.c (struct arc_opcode_hash_entry): New structure.
(arc_find_opcode): New function.
(find_special_case_pseudo): Use arc_find_opcode.
(find_special_case_flag): Likewise.
(assemble_tokens): Likewise.
(md_begin): Build hash using struct arc_opcode_hash_entry.
I see the following fail on aarch64-linux
break void_func
Breakpoint 2 at 0x4007a0: file gdb/testsuite/gdb.reverse/finish-reverse.c, line 44.
(gdb) PASS: gdb.reverse/finish-reverse-bkpt.exp: set breakpoint on void_func
continue
Continuing.
Breakpoint 2, void_func () at gdb/testsuite/gdb.reverse/finish-reverse.c:44^M
44 void_test = 1; /* VOID FUNC */^M
(gdb) PASS: gdb.reverse/finish-reverse-bkpt.exp: continue to breakpoint: void_func
break *void_func^M
Note: breakpoint 2 also set at pc 0x4007a0.^M
Breakpoint 3 at 0x4007a0: file gdb/testsuite/gdb.reverse/finish-reverse.c, line 44.
(gdb) PASS: gdb.reverse/finish-reverse-bkpt.exp: set breakpoint at void_func's entry
reverse-finish^M
Run back to call of #0 void_func () at gdb/testsuite/gdb.reverse/finish-reverse.c:44
main (argc=1, argv=0x7ffffffb78) at gdb/testsuite/gdb.reverse/finish-reverse.c:98
98 void_func (); /* call to void_func */^M
(gdb) FAIL: gdb.reverse/finish-reverse-bkpt.exp: reverse-finish from void_func trips breakpoint at entry
The test assumes that brekapoints on "void_func" and "*void_func" are
set on different places because of function prologue. However, on
aarch64-linux, there is no prologue in void_func, so two breakpoints
are set at the same place (0x4007a0).
(gdb) disassemble void_func
Dump of assembler code for function void_func:
0x00000000004007a0 <+0>: adrp x0, 0x410000
0x00000000004007a4 <+4>: add x0, x0, #0xc14
0x00000000004007a8 <+8>: mov w1, #0x1
0x00000000004007ac <+12>: str w1, [x0]
0x00000000004007b0 <+16>: ret
The fix to this problem is to single step forward before setting
breakpoint on *void_func.
gdb/testsuite:
2016-04-07 Yao Qi <yao.qi@linaro.org>
* gdb.reverse/finish-reverse-bkpt.exp: Use temporary breakpoint.
Execute "si" command.
I see the fail on aarch64-linux,
(gdb) reverse-next
Breakpoint 2, callee () at /home/yao/SourceCode/gnu/gdb/git/gdb/testsuite/gdb.reverse/step-reverse.c:26^M
26 myglob++; return 0; /* ARRIVED IN CALLEE */
(gdb) FAIL: gdb.reverse/next-reverse-bkpt-over-sr.exp: reverse-next over call trips user breakpoint at function entry
The test expects program stops at line 25, but program stops at line 26.
(gdb) maintenance info line-table
objfile: /scratch/yao/gdb/build-git/aarch64-linux-gnu/gdb/testsuite/outputs/gdb.reverse/next-reverse-bkpt-over-sr/next-reverse-bkpt-over-sr ((struct objfile *) 0x613000002880)
compunit_symtab: ((struct compunit_symtab *) 0x621000121760)
symtab: /home/yao/SourceCode/gnu/gdb/git/gdb/testsuite/gdb.reverse/step-reverse.c ((struct symtab *) 0x6210001217e0)
linetable: ((struct linetable *) 0x6210001520d0):
INDEX LINE ADDRESS
0 25 0x0000000000400890
1 26 0x0000000000400890
2 27 0x00000000004008b0
(gdb) disassemble callee
Dump of assembler code for function callee:
0x0000000000400890 <+0>: adrp x0, 0x410000
0x0000000000400894 <+4>: add x0, x0, #0xcac
the line-table show that the first instruction of function callee is
mapped line 25 and 26. I am not sure the line-table is correct, but
it is not the point of this test. The goal of this test is to test
program hits the breakpoint on the first instruction of function after
'reverse-next', so I change this test to expect the breakpoint number
the program hits.
gdb/testsuite:
2016-04-07 Yao Qi <yao.qi@linaro.org>
* gdb.reverse/next-reverse-bkpt-over-sr.exp: Match the breakpoint
number instead of the comments on some line.
Some test fails in gdb.reverse/break-reverse.exp on arm-linux lead me
seeing the following error message,
continue^M
Continuing.^M
Cannot remove breakpoints because program is no longer writable.^M
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Further execution is probably impossible.^M
^M
Breakpoint 3, bar () at /home/yao/SourceCode/gnu/gdb/git/gdb/testsuite/gdb.reverse/break-reverse.c:22^M
22 xyz = 2; /* break in bar */^M
(gdb) PASS: gdb.reverse/break-reverse.exp: continue to breakpoint: bar backward
this is caused by two entries in record_full_breakpoints, and their addr
is the same, but in_target_beneath is different.
during the record, we do continue,
Continuing.
infrun: clear_proceed_status_thread (Thread 13772.13772)
infrun: proceed (addr=0xffffffff, signal=GDB_SIGNAL_DEFAULT)
infrun: step-over queue now empty
infrun: resuming [Thread 13772.13772] for step-over
infrun: skipping breakpoint: stepping past insn at: 0x8620
Sending packet: $Z0,85f4,4#1d...Packet received: OK <----
.....
Sending packet: $vCont;c#a8...infrun: target_wait (-1.0.0, status) =
infrun: -1.0.0 [process -1],
infrun: status->kind = ignore
infrun: TARGET_WAITKIND_IGNORE
infrun: prepare_to_wait
infrun: target_wait (-1.0.0, status) =
infrun: -1.0.0 [process -1],
infrun: status->kind = ignore
infrun: TARGET_WAITKIND_IGNORE
infrun: prepare_to_wait
Packet received: T05swbreak:;0b:9cf5ffbe;0d:9cf5ffbe;0f:f4850000;thread:p35cc.35cc;core:1;
Sending packet: $Z0,85f4,4#1d...Packet received: OK <-----
....
Sending packet: $z0,85f4,4#3d...Packet received: OK <-----
we can see breakpoint on 0x85f4 are inserted *twice*, but only removed
once. That is fine to remote target, because Z/z packets are
idempotent, but there is a leftover in record_full_breakpoints
in record-full target. The flow can be described as below,
record_full_breakpoints remote target
-----------------------------------------------------------------------
forward execution, continue, in_target_beneath 1 breakpoint inserted
insert breakpoints on 0x85f4 in_target_beneath 1
twice
program stops,
remove breakpoint on 0x85f4 in_target_beneath 1 breakpoint removed
reverse execution, continue, in_target_beneath 1 none is requested
insert breakpoints on 0x85f4, in_target_beneath 0
program stops,
remote breakpoint on 0x85f4, in_target_beneath 0 request to remove,
but GDBserver
doesn't know
now, the question is why breakoint on 0x85f4 is inserted twice? One
is the normal breakpoint, and the other is the single step breakpoint.
GDB inserts single step breakpoint to do single step. When program
stops at 0x85f4, both of them are set on 0x85f4, and GDB deletes
single step breakpoint, so in update_global_location_list, this
breakpoint location is no longer found, GDB call
force_breakpoint_reinsertion to mark it condition_updated, and insert
it again.
The reason force_breakpoint_reinsertion is called to update the
conditions in the target side, because the conditions may be
changed. My original fix is to not call force_breakpoint_reinsertion
if OLD_LOC->cond is NULL, but it is not correct if another location
on the same address has condition, GDB doesn't produce condition for
target side, but GDB should do.
Then, I change my mind back to make record-full handling breakpoint
idempotent, to align with remote target. Before insert a new entry
into record_full_breakpoints, look for existing one on the same
address first. I also add an assert on
"bp->in_target_beneath == in_target_beneath", to be safer.
gdb:
2016-04-07 Yao Qi <yao.qi@linaro.org>
* record-full.c (record_full_insert_breakpoint): Return
early if entry on the address is found in
record_full_breakpoints.
I notice that bp_tgt won't be fully initialized if to_insert_breakpoint
isn't called in record_full_insert_breakpoint, and bp_tgt->reqstd_address
is zero, so an entry is added to record_full_breakpoints, but its address
is zero, which is wrong. This patch is to call gdbarch_breakpoint_from_pc
in the else branch to set bp_tgt->reqstd_address and bp_tgt->placed_size.
gdb:
2016-04-07 Yao Qi <yao.qi@linaro.org>
* record-full.c (record_full_insert_breakpoint): Set
bp_tgt->reqstd_address and bp_tgt->placed_size.
When building with --enable-targets=all the target string is not set to
something that matches the pattern arc*-*, and so the script used to
decide if we should build big or little endian linker script currently
exits with an error.
This commit makes little endian linker script be the default, which will
be used when building for all targets, this matches the behaviour from
before I made the endianness switchable, when we only ever built little
endian linker scripts anyway.
ld/ChangeLog:
* emulparams/arc-endianness.sh: Make little endian default choice.
An upcoming commit will add a new arc instruction flag that uses
characters that have never appeared in an arc instruction flag before.
Currently the assembler is very conservative about which characters can
or cannot appear in an instruction flag.
This commit relaxes these constraints a little. After this commit all
alpha-numeric characters are now allowed into instruction flags. This
complete set is not required for the upcoming change, however, having
this slightly larger set does not impact the assemblers ability to
correctly parse input, but does make it easier to add new flag to the
instruction table.
gas/ChangeLog:
* config/tc-arc.c (tokenize_flags): Allow greater range of
characters into flag names.
The preprocess_operands function changes the incoming list of assembler
tokens based on the assumption that the first arc_operand found will be
the same instruction class as all of the arc_operands for the same
mnemonic.
Though this assumption is probably fine, removing this assumption, and
pushing the token change down into assemble_tokens makes the code no
more complex, and might even be easier to follow.
There should be no user visible changes after this commit.
gas/ChangeLog:
* config/tc-arc.c (find_opcode_match): Handle O_symbol case, add
new de_fault label.
(preprocess_operands): Delete.
(assemble_tokens): Remove call to preprocess_operands.
PR gas/19910
* config/tc-sparc.c (sparc_ip): Report an error if the expression
inside a %-macro could not be fully parsed.
* expr.c (integer_constant): Accept and ignore U suffixes to
integers.
(operand): When a missing closing parenthesis is encountered,
report the character that was found instead.
* testsuite/gas/mips/tls-ill.l: Update expected error message.
* testsuite/gas/sparc/pr19910-1.d: New test driver.
* testsuite/gas/sparc/pr19910-1.s: New test.
* testsuite/gas/sparc/pr19910-2.l: Expected error output.
* testsuite/gas/sparc/pr19910-2.s: New test.
* testsuite/gas/sparc/sparc.exp: Run the new tests.
This patch eliminates an error thrown when accessing the value of a
pointer to a structure where the pointer has been optimized out and
'set print object' is 'on'. The error shows up as the rather ugly
value of the pointer variable in Eclipse.
If 'set print object' is 'on', GDB tries to determine the actual
(derived) type of the object rather than the declared type, which
requires dereferencing the pointer, which in this cases throws an
error because the pointer has been optimized out.
The fix is to simply ignore the 'print object on' setting for
pointers or references to structures when they have been optimized
out. This means we just get the declared type instead of the actual
type, because in this case that's the best that we can do.
To implement the fix, value_optimized_out was modified so that it
no longer throws an error when it fails to fetch the specified
value. Instead, it just checks value->optimized_out. If we can't
definitively say that the value is optimized out, then we assume
it is not.
gdb/ChangeLog:
2016-04-06 Don Breazeal <donb@codesourcery.com>
* value.c (value_actual_type): Don't try to get rtti type
of the value if it has been optimized out.
(value_optimized_out): If a memory access error occurs,
just check vaue->optimized_out.
This patch implements a test that ensures that with "set print object
on", -var-create returns "<optimized out>" for an optimized out pointer
to structure, rather than throwing an error, while also ensuring that
any attempt to dereference the pointer *will* throw an error.
It uses the dwarf assembler to construct the appropriate debug info
to represent a pointer-to-struct in the program as optimized out,
and then accesses that pointer in various ways. The test uses both
the console interpreter and the MI interpreter.
gdb/testsuite/ChangeLog:
2016-04-06 Don Breazeal <donb@codesourcery.com>
* gdb.dwarf2/dw2-opt-structptr.c: New test program.
* gdb.dwarf2/dw2-opt-structptr.exp: New test script.
Following, commit
6e774b13c3 Make ftrace tests work with remote targets
the test gdb.threads/dlopen-libpthread.exp started to fail with:
ERROR: error copying "/home/emaisin/build/binutils-gdb/gdb/testsuite/gdb.threads/dlopen-libpthread.so": no such file or directory
This is because the library path is not computed using
standard_output_file, so we try to gdb_load_shlibs an unexisting file.
gdb/testsuite/ChangeLog:
* gdb.threads/dlopen-libpthread.exp: Set binfile_lib using
standard_output_file. Remove unused binfile variable.
It broke the compatibility with gdbserver-7.6 due to:
warning: remote target does not support file transfer, attempting to access files from local filesystem.
gdb/ChangeLog
2016-04-06 Jan Kratochvil <jan.kratochvil@redhat.com>
Revert the previous commit adding unknown_v_replies_ok.
With current FSF GDB HEAD and old FSF gdbserver I expected I could do:
gdb -ex 'file target:/root/redhat/threadit' -ex 'target remote :1234'
(supplying that unsupported qXfer:exec-file:read by "file")
But that does not work because:
Sending packet: $vFile:setfs:0#bf...Packet received: OK
Packet vFile:setfs (hostio-setfs) is supported
...
Sending packet: $vFile:setfs:104#24...Packet received: OK
"target:/root/redhat/threadit": could not open as an executable file: Invalid argument
GDB documentation says:
The valid responses to Host I/O packets are:
An empty response indicates that this operation is not recognized.
This "empty response" vs. "OK" was a bug in gdbserver < 7.7. It was fixed by:
commit e7f0d979dd
Author: Yao Qi <yao@codesourcery.com>
Date: Tue Dec 10 21:59:20 2013 +0800
Fix a bug in matching notifications.
Message-ID: <1386684626-11415-1-git-send-email-yao@codesourcery.com>
https://sourceware.org/ml/gdb-patches/2013-12/msg00373.html
2013-12-10 Yao Qi <yao@codesourcery.com>
* notif.c (handle_notif_ack): Return 0 if no notification
matches.
with unpatched old FSF gdbserver and patched FSF GDB HEAD:
gdb -ex 'file target:/root/redhat/threadit' -ex 'target remote :1234'
Sending packet: $vFile:setfs:0#bf...Packet received: OK
Packet vFile:setfs (hostio-setfs) is NOT supported
...
(gdb) info sharedlibrary
From To Syms Read Shared Object Library
0x00007ffff7ddbae0 0x00007ffff7df627a Yes (*) target:/lib64/ld-linux-x86-64.so.2
0x00007ffff7bc48a0 0x00007ffff7bcf514 Yes (*) target:/lib64/libpthread.so.0
gdb/ChangeLog
2016-04-06 Jan Kratochvil <jan.kratochvil@redhat.com>
* remote.c (struct remote_state): New field unknown_v_replies_ok.
(packet_config_support): Read it.
(remote_start_remote): Set it.
* config/tc-msp430.c (msp430_operands): Check for a NOP preceding
an EINT instruction. Warn/fix as necessary.
* testsuite/gas/msp430/bad.s: Add test of EINT without preceding NOP.
* testsuite/gas/msp430/bad.l: Update expected messages.
currently:
$ gdbserver-7.9 :1234 true &
$ gdb -q -ex 'target remote :1234' # that -q is not relevant here
Remote debugging using :1234
warning: Could not load vsyscall page because no executable was specified
try using the "file" command first.
0x00007ffff7ddcc80 in ?? ()
(gdb) b main
No symbol table is loaded. Use the "file" command.
Make breakpoint pending on future shared library load? (y or [n]) _
Provide more suggestive message to use the "file" command.
gdb/ChangeLog
2016-04-06 Jan Kratochvil <jan.kratochvil@redhat.com>
Pedro Alves <palves@redhat.com>
* exec.c (exec_file_locate_attach): Print warning for unsupported
target_pid_to_exec_file.
* symfile-mem.c (add_vsyscall_page): Remove the "file" command
message part.
2016-04-06 Thomas Preud'homme <thomas.preudhomme@arm.com>
bfd/
* elf32-arm.c (elf32_arm_size_stubs): Move error_ret_free_local to be
a fall through from error_ret_free_internal. Free local_syms in
error_ret_free_local if allocated from bfd_elf_get_elf_syms ().
Starting with this commit:
commit e7ea3ec7c6
Author: Catalin Udma <catalin.udma@freescale.com>
Date: Mon Feb 29 16:16:19 2016 +0200
python: Use console format for output of gdb.execute command
the python script would use console format for gdb.execute output.
This patch fixes py-mi-objfile to expect the console format when is
checking for gdb.execute printing.
gdb/testsuite/ChangeLog:
2016-04-05 Catalin Udma <catalin.udma@freescale.com>
* gdb.python/py-mi-objfile-gdb.py: Use "list main" command.
* gdb.python/py-mi-objfile.exp: Match "list main" output
in console format.
Signed-off-by: Catalin Udma <catalin.udma@freescale.com>
In commit 6e774b13c3, I forgot to update this test.
gdb/testsuite/ChangeLog:
* gdb.arch/ftrace-insn-reloc.exp: Check for IPA basename instead of
absolute.
This aims to bring the linker for big-endian arc targets into line with
the linker for (the default) little endian arc targets.
The bulk of the changes are to extend the target pattern in the test
files from 'arc-*...' to 'arc*-*...' and so match both big and little
endian arc targets.
In the ld/emulparams/ directory the existing scripts checked for a
variable ARC_ENDIAN to switch between big and little endian targets,
however, this variable is never set up.
So, a new script snippet is introduced which sets up ARC_ENDIAN based on
the value of target, this snippet is then included from all of the
existing arc scripts.
The existing big-endian variants of all the scripts, which existed, but
were never used, are deleted in this commit.
ld/ChangeLog:
* emulparams/arc-endianness.sh: New file.
* emulparams/arcebelf.sh: Deleted.
* emulparams/arcebelf_prof.sh: Deleted.
* emulparams/arceblinux.sh: Deleted.
* emulparams/arceblinux_prof.sh: Deleted.
* emulparams/arcelf.sh: Include arc-endinness.sh.
* emulparams/arcelf_prof.sh: Include arc-endinness.sh.
* emulparams/arclinux.sh: Include arc-endinness.sh.
* emulparams/arclinux_prof.sh: Include arc-endinness.sh.
* emulparams/arcv2elf.sh: Include arc-endinness.sh.
* emulparams/arcv2elfx.sh: Include arc-endinness.sh.
* testsuite/ld-elf/compressed1d.d: Update pattern for big and
little endian arc targets.
* testsuite/ld-elf/eh-frame-hdr.d: Likewise.
* testsuite/ld-elf/group1.d: Likewise.
* testsuite/ld-elf/group3b.d: Likewise.
* testsuite/ld-elf/group8a.d: Likewise.
* testsuite/ld-elf/group8b.d: Likewise.
* testsuite/ld-elf/group9a.d: Likewise.
* testsuite/ld-elf/group9b.d: Likewise.
* testsuite/ld-elf/linkonce2.d: Likewise.
* testsuite/ld-elf/pr12851.d: Likewise.
* testsuite/ld-elf/pr12975.d: Likewise.
* testsuite/ld-elf/pr13177.d: Likewise.
* testsuite/ld-elf/pr13195.d: Likewise.
* testsuite/ld-elf/pr17615.d: Likewise.
* testsuite/ld-elf/pr19162.d: Likewise.
* testsuite/ld-elf/sec64k.exp: Likewise.
* testsuite/lib/ld-lib.exp: Likewise.
