(status_pending_p_callback): Remove redundant statement. Check
for !TARGET_WAITIKIND_IGNORE, instead of
TARGET_WAITKIND_STOPPED.
(handle_tracepoints): Make sure LWP is locked. Adjust.
(linux_wait_for_event_1): Adjust.
(linux_cancel_breakpoints): New.
(unsuspend_one_lwp): New.
(unsuspend_all_lwps): New.
(linux_wait_1): If finishing a step-over, unsuspend all lwps.
(send_sigstop_callback): Change return type to int, add new
`except' parameter and handle it.
(suspend_and_send_sigstop_callback): New.
(stop_all_lwps): Add new `suspend' and `expect' parameters, and
pass them down. If SUSPEND, also increment the lwp's suspend
count.
(linux_resume_one_lwp): Add notice about resuming a suspended LWP.
(need_step_over_p): Don't consider suspended LWPs.
(start_step_over): Adjust.
(proceed_one_lwp): Change return type to int, add new `except'
parameter and handle it.
(unsuspend_and_proceed_one_lwp): New.
(proceed_all_lwps): Use find_inferior instead of
for_each_inferior.
(unstop_all_lwps): Add `unsuspend' parameter. If UNSUSPEND, them
also decrement the suspend count of LWPs. Pass `except' down,
instead of hacking its suspend count.
(linux_pause_all): Add `freeze' parameter. Adjust.
(linux_unpause_all): New.
(linux_target_ops): Install linux_unpause_all.
* server.c (handle_status): Adjust.
* target.h (struct target_ops): New fields `unpause_all' and
`cancel_breakpoints'. Add new parameter to `pause_all'.
(pause_all): Add new `freeze' parameter.
(unpause_all): New.
(cancel_breakpoints): New.
* tracepoint.c (clear_installed_tracepoints): Pause threads, and
cancel breakpoints.
(cmd_qtstart): Pause threads.
(stop_tracing): Pause threads, and cancel breakpoints.
* win32-low.c (win32_target_ops): Adjust.
the inferior right away from here...
(linux_wait_1): ... to here, and adjust to check the thread's
last_resume_kind instead of the lwp's step or stop_expected flags.
(linux_kill): Stop all lwps here. Don't delete the main lwp here.
(linux_detach_one_lwp): Assume the lwp is stopped.
(any_thread_of): Delete.
(linux_detach): Stop all lwps here. Don't blindly delete all
breakpoints.
(delete_lwp_callback): New.
(linux_mourn): Delete all lwps of the process that is gone.
(linux_wait_1): Don't delete the last lwp of the process here.
* mem-break.h (mark_breakpoints_out): Declare.
* mem-break.c (mark_breakpoints_out): New.
(free_all_breakpoints): Use it.
* server.c (handle_target_event): If the process is gone, mark
breakpoints out.
* thread-db.c (struct thread_db) <create_bp>: New field.
(thread_db_enable_reporting): Fix prototype. Store a thread event
breakpoint reference in the thread_db struct.
(thread_db_load_search): Clear the thread_db object.
(try_thread_db_load_1): Ditto.
(switch_to_process): New.
(disable_thread_event_reporting): Use it.
(remove_thread_event_breakpoints): New.
(thread_db_detach, thread_db_mourn): Use it.
(linux_detach_one_lwp): Adjust to send_sigstop interface change.
(send_sigstop): Take an lwp_info as parameter instead. Queue a
SIGSTOP even if the LWP is stopped.
(send_sigstop_callback): New.
(stop_all_lwps): Use send_sigstop_callback instead.
(linux_resume_one_thread): Adjust.
(proceed_one_lwp): Still proceed an LWP that the client has
requested to stop, if we haven't reported it as stopped yet. Make
sure that LWPs the client want stopped, have a pending SIGSTOP.
* NEWS: Document new feature.
* remote.c (PACKET_qGetTIBAddr): New enum element.
(remote_get_tib_address): New function.
(init_remote_ops): Set to_get_tib_address field
to remote_get_tib_address.
(_initialize_remote): Add add_packet_config_cmd
for PACKET_qGetTIBAddr.
* target.c (update_current_target): Set default value for
new to_get_tib_address field.
* target.h (target_ops): New field to_get_tib_address.
(target_get_tib_address): New macro.
* windows-nat.c (thread_info): Add thread_local_base field.
(windows_add_thread): Add tlb argument of type 'void *'.
(fake_create_process): Adapt windows_add_thread call.
(get_windows_debug_event): Idem.
(windows_get_tib_address): New function.
(init_windows_ops): Set to_get_tib_address field
to remote_get_tib_address.
(_initialize_windows_nat): Replace info_w32_cmdlist
initialization by a call to init_w32_command_list.
(info_w32_command, info_w32_cmdlist): Removed from here...
to windows-tdep.c file.
* windows-tdep.h (info_w32_cmdlist): Declare.
(init_w32_command_list): New external function
declaration.
* windows-tdep.c: Add several headers.
(info_w32_cmdlist): to here, made global.
(thread_information_32): New struct.
(thread_information_64): New struct.
(TIB_NAME): New char array.
(MAX_TIB32, MAX_TIB64, FULL_TIB_SIZE): New constants.
(maint_display_all_tib): New static variable.
(windows_get_tlb_type): New function.
(tlb_value_read, tlb_value_write): New functions.
(tlb_value_funcs): New static struct.
(tlb_make_value): New function.
(display_one_tib): New function.
(display_tib): New function.
(show_maint_show_all_tib):New function.
(info_w32_command): Moved from windows-nat.c.
(init_w32_command_list): New function.
(_initialize_windows_tdep): New function.
New "maint set/show show-all-tib" command
New "$_tlb" internal variable.
gdbserver/ChangeLog entry:
* server.c (handle_query): Handle 'qGetTIBAddr' query.
* target.h (target_ops): New get_tib_address field.
* win32-low.h (win32_thread_info): Add thread_local_base field.
* win32-low.c (child_add_thread): Add tlb argument.
Set thread_local_base field to TLB.
(get_child_debug_event): Adapt to child_add_thread change.
(win32_get_tib_address): New function.
(win32_target_ops): Set get_tib_address field to
win32_get_tib_address.
* linux-low.c (linux_target_ops): Set get_tib_address field to NULL.
doc/ChangeLog entry:
gdb.texinfo ($_tlb): Document new automatic convinience variable.
(info w32 thread-information-block): Document new command.
(qGetTIBAddress): Document new gdbserver query.
(maint set/show show-all-tib): Document new command.
* linux-low.c (linux_remove_process): Delete.
(add_lwp): Don't set last_resume_kind here.
(linux_kill): Use `mourn'.
(linux_detach): Use `thread_db_detach', and `mourn'.
(linux_mourn): New.
(linux_attach_lwp_1): Adjust comment.
(linux_attach): last_resume_kind moved the thread_info; adjust.
(status_pending_p_callback): Adjust.
(linux_wait_for_event_1): Adjust.
(count_events_callback, select_singlestep_lwp_callback)
(select_event_lwp_callback, cancel_breakpoints_callback)
(db_wants_lwp_stopped, linux_wait_1, need_step_over_p)
(proceed_one_lwp): Adjust.
(linux_async): Add debug output.
(linux_thread_stopped): New.
(linux_pause_all): New.
(linux_target_ops): Install linux_mourn, linux_thread_stopped and
linux_pause_all.
* linux-low.h (struct lwp_info): Delete last_resume_kind field.
(thread_db_free): Delete declaration.
(thread_db_detach, thread_db_mourn): Declare.
* thread-db.c (thread_db_init): Use thread_db_mourn.
(thread_db_free): Delete, split in two.
(disable_thread_event_reporting): New.
(thread_db_detach): New.
(thread_db_mourn): New.
* server.h (struct thread_info) <last_resume_kind>: New field.
<attached>: Add comment.
<gdb_detached>: New field.
(handler_func): Change return type to int.
(handle_serial_event, handle_target_event): Ditto.
(gdb_connected): Declare.
(tracing): Delete.
(disconnected_tracing): Declare.
(stop_tracing): Declare.
* server.c (handle_query) <qSupported>: Report support for
disconnected tracing.
(queue_stop_reply_callback): Account for running threads.
(gdb_wants_thread_stopped): New.
(gdb_wants_all_threads_stopped): New.
(gdb_reattached_process): New.
(handle_status): Clear the `gdb_detached' flag of all processes.
In all-stop, stop all threads.
(main): Be sure to leave tfind mode. Handle disconnected tracing.
(process_serial_event): If the remote connection breaks, or if an
exit was forced with "monitor exit", force an event loop exit.
Handle disconnected tracing on detach.
(handle_serial_event): Adjust.
(handle_target_event): If GDB isn't connected, forward events back
to the inferior, unless the last process exited, in which case,
exit gdbserver. Adjust interface.
* remote-utils.c (remote_open): Don't block in accept. Instead
register an event loop source on the listen socket file
descriptor. Refactor bits into ...
(listen_desc): ... this new global.
(gdb_connected): ... this new function.
(enable_async_notification): ... this new function.
(handle_accept_event): ... this new function.
(remote_close): Clear remote_desc.
* inferiors.c (add_thread): Set the new thread's last_resume_kind.
* target.h (struct target_ops) <mourn, thread_stopped, pause_all>:
New fields.
(mourn_inferior): Define.
(target_process_qsupported): Avoid the dangling else problem.
(thread_stopped): Define.
(pause_all): Define.
(target_waitstatus_to_string): Declare.
* target.c (target_waitstatus_to_string): New.
* tracepoint.c (tracing): Make extern.
(disconnected_tracing): New.
(stop_tracing): Make extern. Handle tracing stops due to GDB
disconnecting.
(cmd_qtdisconnected): New.
(cmd_qtstatus): Report disconnected tracing status in trace reply.
(handle_tracepoint_general_set): Handle QTDisconnected.
* event-loop.c (event_handler_func): Change return type to int.
(process_event): Bail out if the event handler wants the event
loop to stop.
(handle_file_event): Ditto.
(start_event_loop): Bail out if the event handler wants the event
loop to stop.
* nto-low.c (nto_target_ops): Adjust.
* spu-low.c (spu_wait): Don't remove the process here.
(spu_target_ops): Adjust.
* win32-low.c (win32_wait): Don't remove the process here.
(win32_target_ops): Adjust.
an extended waitstatus, or by a watchpoint.
(cancel_breakpoints_callback): Don't cancel a breakpoint if the
thread was stepping or has been stopped by a watchpoint.
there's a GDB breakpoint at stop_pc. Always report a trap to GDB
if we could tell there's a GDB breakpoint at stop_pc.
(need_step_over_p): Don't do a step over if we find a GDB
breakpoint at the resume PC.
* mem-break.c (struct raw_breakpoint): New.
(enum bkpt_type): New type `gdb_breakpoint'.
(struct breakpoint): Delete the `PC', `old_data' and `inserted'
fields. New field `raw'.
(find_raw_breakpoint_at): New.
(set_raw_breakpoint_at): Handle refcounting. Create a raw
breakpoint instead.
(set_breakpoint_at): Adjust.
(delete_raw_breakpoint): New.
(release_breakpoint): New.
(delete_breakpoint): Rename to...
(delete_breakpoint_1): ... this. Add proc parameter. Use
release_breakpoint. Return ENOENT.
(delete_breakpoint): Reimplement.
(find_breakpoint_at): Delete.
(find_gdb_breakpoint_at): New.
(delete_breakpoint_at): Delete.
(set_gdb_breakpoint_at): New.
(delete_gdb_breakpoint_at): New.
(gdb_breakpoint_here): New.
(set_reinsert_breakpoint): Use release_breakpoint.
(uninsert_breakpoint): Rename to ...
(uninsert_raw_breakpoint): ... this.
(uninsert_breakpoints_at): Adjust to handle raw breakpoints.
(reinsert_raw_breakpoint): Change parameter type to
raw_breakpoint.
(reinsert_breakpoints_at): Adjust to handle raw breakpoints
instead.
(check_breakpoints): Adjust. Use release_breakpoint.
(breakpoint_here): Rewrite using find_raw_breakpoint_at.
(breakpoint_inserted_here): Ditto.
(check_mem_read): Adjust to iterate over raw breakpoints instead.
Don't trust the breakpoint's shadow if it is not inserted.
(check_mem_write): Adjust to iterate over raw breakpoints instead.
(delete_all_breakpoints): Adjust.
(free_all_breakpoints): Mark all breakpoints as uninserted, and
use delete_breakpoint_1.
* mem-break.h (breakpoints_supported): Delete declaration.
(set_gdb_breakpoint_at): Declare.
(gdb_breakpoint_here): Declare.
(delete_breakpoint_at): Delete.
(delete_gdb_breakpoint_at): Declare.
* server.h (struct raw_breakpoint): Forward declare.
(struct process_info): New field `raw_breakpoints'.
* linux-x86-low.c (x86_insert_point, x86_remote_point): Handle Z0
breakpoints.
(linux_wait_for_event_1): Move most of the internal breakpoint
handling from here...
(linux_wait_1): ... to here.
(count_events_callback): New.
(select_singlestep_lwp_callback): New.
(select_event_lwp_callback): New.
(cancel_breakpoints_callback): New.
(select_event_lwp): New.
(linux_wait_1): Simplify internal breakpoint handling. Give equal
priority to all LWPs that have had events that should be reported
to the client. Cancel breakpoints when about to reporting the
event to the client, not while stopping lwps. No longer cancel
finished single-steps here.
(cancel_finished_single_step): Delete.
(cancel_finished_single_steps): Delete.
`stopped_by_watchpoint' and `stopped_data_address'.
* linux-low.c (linux_wait_for_lwp): Check for watchpoint triggers
here, and cache them in the lwp object.
(wait_for_sigstop): Check stopped_by_watchpoint lwp field
directly.
(linux_resume_one_lwp): Clear the lwp's stopped_by_watchpoint
field.
(linux_stopped_by_watchpoint): Rewrite.
(linux_stopped_data_address): Rewrite.
match a breakpoint.
(handle_inferior_event): Move the check for unusual breakpoint
signals earlier.
gdbserver/
* linux-low.c (get_stop_pc): Check for SIGTRAP.
(linux_wait_for_event_1): Handle SIGILL and SIGSEGV as possible
breakpoints.
parameter. Don't release/detach from thread_db here.
(linux_kill): Release/detach from thread_db here, ...
(linux_detach): ... and here, before actually detaching.
(linux_wait_1): ... and here, when a process exits.
* thread-db.c (any_thread_of): New.
(thread_db_free): Switch the current inferior to a thread of the
passed in process.
* linux-nat.c (kill_lwp): Minor cleanup, move definition of
tkill_failed into ifdef HAVE_TKILL_SYSCALL. Move setting of errno
there too. Delete unnecessary resetting of errno after syscall.
Minor comment changes to match gdbserver/linux-low.c:kill_lwp.
gdbserver/
* linux-low.c (kill_lwp): Use __NR_tkill instead of SYS_tkill.
Move definition of tkill_failed to ifdef __NR_tkill to avoid gcc
warning ifndef __NR_tkill. Move setting of errno there too.
Delete unnecessary resetting of errno after syscall.
Minor comment changes to match gdb/linux-nat.c:kill_lwp.
Pass it to thread_db_free.
(linux_kill, linux_detach, linux_wait_1): Adjust to pass the
proper `detaching' argument to linux_remove_process.
* linux-low.h (thread_db_free): Add `detaching' parameter.
* thread-db.c (thread_db_init): Pass false as `detaching' argument
to thread_db_free.
(thread_db_free): Add `detaching' parameter. Only
call td_ta_clear_event if detaching from process.
* linux-nat.c: Include <sys/vfs.h>.
(SPUFS_MAGIC): Define.
(spu_enumerate_spu_ids): New function.
(linux_proc_xfer_spu): New function.
(linux_xfer_partial): Handle TARGET_OBJECT_SPU.
(iterate_over_spus): New function.
(struct linux_spu_corefile_data): New data type.
(linux_spu_corefile_callback): New function.
(linux_spu_make_corefile_notes): New function.
(linux_nat_make_corefile_notes): Call it.
* corelow.c (struct spuid_list): New data type.
(add_to_spuid_list): New function.
(core_xfer_partial): Handle TARGET_OBJECT_SPU.
gdbserver/ChangeLog:
* linux-low.c: Include <sys/stat.h> and <sys/vfs.h>.
(SPUFS_MAGIC): Define.
(spu_enumerate_spu_ids): New function.
(linux_qxfer_spu): New function.
(linux_target_ops): Install linux_qxfer_spu.
Pedro Alves <pedro@codesourcery.com>
* target.h (struct target_ops) <supports_multi_process>: New
callback.
(target_supports_multi_process): New.
* server.c (handle_query): Even if GDB reports support, only
enable multi-process if the target also supports it. Report
multi-process support only if the target backend supports it.
* linux-low.c (linux_supports_multi_process): New function.
(linux_target_ops): Install it as target_supports_multi_process
callback.
