* emulparams/elf32bmip.sh (OTHER_GOT_RELOC_SECTIONS): Define.
* emulparams/elf32bmipn32-defs.sh (OTHER_GOT_RELOC_SECTIONS): Likewise.
ld/testsuite/
* ld-mips-elf/rel32-o32.d: Bump the section number of .text by 1
to account for the fact that .rel.dyn is now before .text in the
section table.
* ld-mips-elf/rel32-n32.d: Likewise.
* ld-mips-elf/rel64.d: Likewise.
* bfd/elf64-sparc.c: Add FreeBSD support.
(elf64_sparc_fbsd_post_process_headers): New function.
* bfd/targets.c (_bfd_target_vector): Add bfd_elf64_sparc_freebsd_vec.
* bfd/config.bfd (sparc64-*-freebsd*): Set targ_defvec to bfd_elf64_sparc_freebsd_vec.
* bfd/configure.in: Add entry for bfd_elf64_sparc_freebsd_vec.
* bfd/configure: Regenerate.
* gas/config/tc-sparc.c (md_parse_option): Treat any target starting with elf32-sparc
as a viable target for the -32 switch and any target starting with elf64-sparc as a
viable target for the -64 switch.
(sparc_target_format): For 64-bit ELF flavoured output use ELF_TARGET_FORMAT64
while for 32-bit ELF flavoured output use ELF_TARGET_FORMAT.
* gas/config/tc-sparc.h (ELF_TARGET_FORMAT, ELF_TARGET_FORMAT64): Define.
* ld/emulparams/elf64_sparc_fbsd.sh (OUTPUT_FORMAT): Define as elf64-sparc-freebsd.
* Makefile.am (eelf64bmip.c): Depend on emulparams/elf64bmip-defs.sh.
(eelf64btsmip.c, eelf64ltsmip.c): Likewise.
* Makefile.in: Regenerate.
* emulparams/elf32bmipn32-defs.sh (INITIAL_READONLY_SECTIONS): Include
.reginfo rather than .MIPS.options.
* emulparams/elf64bmip-defs.sh: New file.
* emulparams/elf64bmip.sh: Include it.
(COMMONPAGESIZE): Delete.
* emulparams/elf64btsmip.sh: As for elf64bmip.sh.
ld/testsuite/
* ld-mips-elf/branch-misc-1.d: Set the start address to 0x20000000.
* ld-mips-elf/jalbal.d: Likewise 0x200000a0.
* ld-mips-elf/jaloverflow-2.d: Likewise 0x20000000.
* ld-mips-elf/reloc-3-n32.d: Likewise.
* ld-mips-elf/reloc-3.d: Likewise.
* ld-mips-elf/textrel-1.d: Don't require a specific file offset for
.dynamic.
* emulparams/elf32xtensa.sh: Set MAXPAGESIZE here instead of including
xtensa-config.sh.
* Makefile.am (eelf32xtensa.c): Remove dependency on xtensa-config.sh.
* Makefile.in: Regenerate.
* elf32-xtensa.c (xtensa_get_property_section_name): Delete.
(xtensa_get_property_section): New.
(xtensa_read_table_entries): Use xtensa_get_property_section.
(relax_property_section, xtensa_get_property_predef_flags): Handle
group name suffixes in property section names.
(match_section_group): New.
gas/
* config/tc-xtensa.c (FINI_LITERAL_SECTION_NAME): Delete.
(INIT_LITERAL_SECTION_NAME): Delete.
(lit_state struct): Remove segment names, init_lit_seg, and
fini_lit_seg. Add lit_prefix and current_text_seg.
(init_literal_head_h, init_literal_head): Delete.
(fini_literal_head_h, fini_literal_head): Delete.
(xtensa_begin_directive): Move argument parsing to
xtensa_literal_prefix function.
(xtensa_end_directive): Deallocate lit_prefix field of lit_state.
(xtensa_literal_prefix): Parse the directive argument here and
record it in the lit_prefix field. Remove code to derive literal
section names.
(linkonce_len): New.
(get_is_linkonce_section): Use linkonce_len. Check for any
".gnu.linkonce.*" section, not just text sections.
(md_begin): Remove initialization of deleted lit_state fields.
(xtensa_reorder_segments, xtensa_post_relax_hook): Remove references
to init_literal_head and fini_literal_head.
(xtensa_move_literals): Likewise. Skip literals for .init and .fini
when traversing literal_head list.
(match_section_group): New.
(cache_literal_section): Rewrite to determine the literal section
name on the fly, create the section and return it.
(xtensa_switch_to_literal_fragment): Adjust for cache_literal_section.
(xtensa_switch_to_non_abs_literal_fragment): Likewise.
(xtensa_create_property_segments, xtensa_create_xproperty_segments):
Use xtensa_get_property_section from bfd.
(retrieve_xtensa_section): Delete.
* doc/c-xtensa.texi (Xtensa Options): Fix --text-section-literals
description to refer to plural literal sections and add xref to
the Literal Directive section.
(Literal Directive): Describe new rules for deriving literal section
names. Add footnote for special case of .init/.fini with
--text-section-literals.
(Literal Prefix Directive): Replace old naming rules with xref to the
Literal Directive section.
ld/
* emulparams/elf32xtensa.sh (.xt.prop): Add .xt.prop.*.
* scripttempl/elfxtensa.sc (.text): Add .literal.*.
* Makefile.am: Add rules to build pe-arm-wince.lo and pei-arm-wince.lo objects.
* Makefile.in: Regenerate.
* pe-arm-wince.c: New file.
* pei-arm-wince.c: New file.
* pei-arm.c: Remove ARM_WINCE block.
* pe-arm.c: Remove ARM_WINCE block. Rename
bfd_arm_pe_allocate_interworking_sections,
bfd_arm_pe_get_bfd_for_interworking, and
bfd_arm_pe_process_before_allocation to
bfd_armpe_allocate_interworking_sections,
bfd_armpe_get_bfd_for_interworking, and
bfd_armpe_process_before_allocation. Move them before including bfd.h.
* bfd.c: ARM wince bfd format names were renamed. Adjust.
* coff-arm.c [ARM_WINCE]: Adjust so Windows CE doesn't end up with unexpected/conflicting relocs.
* targets.c: The arm-wince-pe target got its own new vector. Adjust.
* config.bfd: Likewise.
* configure.in: Likewise.
* configure: Regenerate.
binutils
* configure.in: Split arm-pe and arm-wince-pe. Build dlltool with -DDLLTOOL_ARM_WINCE for Windows CE case.
* configure: Regenerate.
* dlltool.c: Add support for arm-wince.
gas
* Makefile.am (TARG_ENV_HFILES): Add te-wince-pe.h.
* Makefile.in: Regenerate.
* config/tc-arm.h [TARGET_FORMAT]: ARM wince bfd names were renamed. Adjust.
ld
* Makefile.am: Split arm-wince into its own emulation.
* Makefile.in: Regenerate.
* configure.tgt: Set targ_emul to arm_wince_pe for ARM Windows CE targets.
* pe-dll.c : Define PE_ARCH_arm_wince.
(pe_detail_list): Add PE_ARCH_arm_wince case.
(make_one): Handle PE_ARCH_arm_epoc and PE_ARCH_arm_wince cases.
* emulparams/arm_wince_pe.sh: New file.
* emultempl/pe.em: Handle new TARGET_IS_arm_wince_pe define.
Remap bfd_arm_allocate_interworking_sections, bfd_arm_get_bfd_for_interworking and
bfd_arm_process_before_allocation for arm-pe and arm-wince-pe targets too.
(gld_${EMULATION_NAME}_recognized_file): Handle arm-wince and arm-epoc bfd format names.
2006-08-02 Richard Sandiford <richard@codesourcery.com>
Kazu Hirata <kazu@codesourcery.com>
Phil Edwards <phil@codesourcery.com>
Nathan Sidwell <nathan@codesourcery.com>
* config.bfd (sh-*-vxworks): Use bfd_elf32_shvxworks_vec and
bfd_elf32_shlvxworks_vec.
* configure.in (bfd_elf32_sh64_vec): Add elf-vxworks.lo.
(bfd_elf32_sh64l_vec, bfd_elf32_sh64lin_vec): Likewise.
(bfd_elf32_sh64blin_vec, bfd_elf32_sh64lnbsd_vec): Likewise.
(bfd_elf32_sh64nbsd_vec, bfd_elf32_sh_vec): Likewise.
(bfd_elf32_shblin_vec, bfd_elf32_shl_vec): Likewise.
(bfd_elf32_shl_symbian_vec, bfd_elf32_shlin_vec): Likewise.
(bfd_elf32_shlnbsd_vec, bfd_elf32_shnbsd_vec): Likewise.
(bfd_elf32_shlvxworks_vec, bfd_elf32_shvxworks_vec): New stanzas.
* configure: Regenerate.
* Makefile.am: Regenerate dependencies.
* Makefile.in: Regenerate.
* elf-vxworks.c (elf_vxworks_gott_symbol_p): New function.
(elf_vxworks_add_symbol_hook): Use it.
(elf_vxworks_link_output_symbol_hook): Likewise. Use the hash
table entry to check for weak undefined symbols and to obtain
the original bfd.
(elf_vxworks_emit_relocs): Use target_index instead of this_idx.
* elf32-sh-relocs.h: New file, split from elf32-sh.c.
(R_SH_DIR32): Use SH_PARTIAL32 for the partial_inplace field,
SH_SRC_MASK32 for the src_mask field, and SH_ELF_RELOC for the
special_function field.
(R_SH_REL32): Use SH_PARTIAL32 and SH_SRC_MASK32 here too.
(R_SH_REL32, R_SH_TLS_GD_32, R_SH_TLS_LD_32): Likewise.
(R_SH_TLS_LDO_32, R_SH_TLS_IE_32, R_SH_TLS_LE_32): Likewise.
(R_SH_TLS_DTPMOD32, R_SH_TLS_DTPOFF32, R_SH_TLS_TPOFF32): Likewise.
(R_SH_GOT32, R_SH_PLT32, R_SH_COPY, R_SH_GLOB_DAT): Likewise.
(R_SH_JMP_SLOT, R_SH_RELATIVE, R_SH_GOTOFF, R_SH_GOTPC): Likewise.
(SH_PARTIAL32, SH_SRC_MASK32, SH_ELF_RELOC): Undefine at end of file.
* elf32-sh.c: Include elf32-vxworks.h.
(MINUS_ONE): Define.
(sh_elf_howto_table): Include elf32-sh-relocs.h with SH_PARTIAL32
set to TRUE, SH_SRC_MASK32 set to 0xffffffff, and SH_ELF_RELOC set
to sh_elf_reloc.
(sh_vxworks_howto_table): New variable. Include elf32-sh-relocs.h
with SH_PARTIAL32 set to FALSE, SH_SRC_MASK32 set to 0, and
SH_ELF_RELOC set to bfd_elf_generic_reloc.
(vxworks_object_p, get_howto_table): New functions.
(sh_elf_reloc_type_lookup): Fix typo. Use get_howto_table.
(sh_elf_info_to_howto): Use get_howto_table.
(sh_elf_relax_section): Honor the partial_inplace field of the
R_SH_DIR32 howto.
(sh_elf_relax_delete_bytes): Likewise.
(elf_sh_plt_info): New structure.
(PLT_ENTRY_SIZE): Replace both definitions with...
(ELF_PLT_ENTRY_SIZE): ...this new macro, with separate definitions for
INCLUDE_SHMEDIA and !INCLUDE_SHMEDIA.
(elf_sh_plt0_entry_be): Update sizes of both definitions accordingly.
(elf_sh_plt0_entry_le): Likewise.
(elf_sh_plt_entry_be, elf_sh_plt_entry_le): Likewise.
(elf_sh_pic_plt_entry_be, elf_sh_pic_plt_entry_le): Likewise.
(elf_sh_plts): New structure, with separate definitions for
INCLUDE_SHMEDIA and !INCLUDE_SHMEDIA.
(elf_sh_plt0_entry): Delete both definitions.
(elf_sh_plt_entry, elf_sh_pic_plt_entry): Likewise.
(elf_sh_sizeof_plt, elf_sh_plt_plt0_offset): Likewise.
(elf_sh_plt_temp_offset, elf_sh_plt_symbol_offset): Likewise.
(elf_sh_plt_reloc_offset): Likewise.
(movi_shori_putval): Delete in favor of...
(install_plt_field): ...this new function, with separate definitions
for INCLUDE_SHMEDIA and !INCLUDE_SHMEDIA.
(get_plt_info): New function, with separate definitions
for INCLUDE_SHMEDIA and !INCLUDE_SHMEDIA.
(elf_sh_plt0_linker_offset, elf_sh_plt0_gotid_offset): Delete.
(VXWORKS_PLT_HEADER_SIZE, VXWORKS_PLT_ENTRY_SIZE): New macros.
(vxworks_sh_plt0_entry_be, vxworks_sh_plt0_entry_le): New constants.
(vxworks_sh_plt_entry_be, vxworks_sh_plt_entry_le): Likewise.
(vxworks_sh_pic_plt_entry_be, vxworks_sh_pic_plt_entry_le): Likewise.
(get_plt_index, get_plt_offset): New functions.
(elf_sh_link_hash_table): Add srelplt2, plt_info and vxworks_p fields.
(sh_elf_link_hash_table_create): Initialize them.
(sh_elf_create_dynamic_sections): Call
elf_vxworks_create_dynamic_sections for VxWorks.
(allocate_dynrelocs): Use htab->plt_info to get the size of PLT
entries. Allocate relocation entries in .rela.plt.unloaded if
generating a VxWorks executable.
(sh_elf_always_size_sections): New function.
(sh_elf_size_dynamic_sections): Extend .rela.plt handling to
.rela.plt.unloaded.
(sh_elf_relocate_section): Use get_howto_table. Honor
partial_inplace when calculating the addend for dynamic
relocations. Use get_plt_index.
(sh_elf_finish_dynamic_symbol): Use get_plt_index, install_plt_field
and htab->plt_info. Fill in the bra .plt offset for VxWorks
executables. Populate .rela.plt.unloaded. Do not make
_GLOBAL_OFFSET_TABLE_ absolute on VxWorks.
(sh_elf_finish_dynamic_sections): Use install_plt_field and
htab->plt_info. Handle cases where there is no special PLT header.
Populate the first relocation in .rela.plt.unloaded and fix up
the remaining entries.
(sh_elf_plt_sym_val): Use get_plt_info.
(elf_backend_always_size_sections): Define.
(TARGET_BIG_SYM, TARGET_BIG_NAME): Override for VxWorks.
(TARGET_LITTLE_SYM, TARGET_BIG_SYM): Likewise.
(elf32_bed, elf_backend_want_plt_sym): Likewise.
(elf_symbol_leading_char, elf_backend_want_got_underscore): Likewise.
(elf_backend_grok_prstatus, elf_backend_grok_psinfo): Likewise.
(elf_backend_add_symbol_hook): Likewise.
(elf_backend_link_output_symbol_hook): Likewise.
(elf_backend_emit_relocs): Likewise.
(elf_backend_final_write_processing): Likewise.
(ELF_MAXPAGESIZE, ELF_COMMONPAGESIZE): Likewise.
* targets.c (bfd_elf32_shlvxworks_vec): Declare.
(bfd_elf32_shvxworks_vec): Likewise.
(_bfd_target_vector): Include bfd_elf32_shlvxworks_vec and
bfd_elf32_shvxworks_vec.
gas/
* config/tc-sh.c (apply_full_field_fix): New function.
(md_apply_fix): Use it instead of md_number_to_chars. Do not fill
in fx_addnumber for BFD_RELOC_32_PLT_PCREL.
(tc_gen_reloc): Use fx_addnumber rather than 0 as the default case.
* config/tc-sh.h (TARGET_FORMAT): Override for TE_VXWORKS.
ld/
2006-08-02 Richard Sandiford <richard@codesourcery.com>
Kazu Hirata <kazu@codesourcery.com>
Phil Edwards <phil@codesourcery.com>
* Makefile.am (ALL_EMULATIONS): Add eshelf_vxworks.o and
eshlelf_vxworks.o.
(eshelf_vxworks.c, eshlelf_vxworks.c): New rules.
* Makefile.in: Regenerate.
* configure.tgt (sh-*-vxworks): Use shelf_vxworks and
shlelf_vxworks.
* emulparams/shelf_vxworks.sh: New file.
* emulparams/shlelf_vxworks.sh: Likewise.
* emulparams/vxworks.sh (FINI): Prefix _etext with ${SYMPREFIX}.
(OTHER_END_SYMBOLS): Likewise _ehdr.
(DATA_END_SYMBOLS): Likewise _edata.
* emultempl/vxworks.em (vxworks_after_open): Check whether output_bfd
is indeed an ELF file before dealing with --force-dynamic.
ld/testsuite/
* ld-sh/rd-sh.exp: Treat vxworks1-static.d specially.
* ld-sh/sh-vxworks.exp: New file.
* ld-sh/sh.exp: Extend sh-linux SIZEOF_HEADERS handling to
sh-*-vxworks.
* ld-sh/vxworks1-le.dd, ld-sh/vxworks1-lib-le.dd,
* ld-sh/vxworks1-lib.dd, ld-sh/vxworks1-lib.nd,
* ld-sh/vxworks1-lib.rd, ld-sh/vxworks1-lib.s,
* ld-sh/vxworks1-static.d, ld-sh/vxworks1.dd,
* ld-sh/vxworks1.ld, ld-sh/vxworks1.rd, ld-sh/vxworks1.s,
* ld-sh/vxworks2-static.sd, ld-sh/vxworks2.s,
* ld-sh/vxworks2.sd, ld-sh/vxworks3-le.dd,
* ld-sh/vxworks3-lib-le.dd, ld-sh/vxworks3-lib.dd,
* ld-sh/vxworks3-lib.s, ld-sh/vxworks3.dd, ld-sh/vxworks3.s,
* ld-sh/vxworks4.d, ld-sh/vxworks4a.s, ld-sh/vxworks4b.s,
* ld-sh/reloc1.s, ld-sh/reloc1.d: New tests.
* bfd/elf64-x86-64.c: Add FreeBSD support.
(elf64_x86_64_fbsd_post_process_headers): New function.
* bfd/targets.c (_bfd_target_vector): Add bfd_elf64_x86_64_freebsd_vec.
* bfd/config.bfd (x64_64-*-freebsd*): Add bfd_elf64_x86_64_freebsd_vec to the targ_selvecs.
* bfd/configure.in: Add entry for bfd_elf64_x86_64_freebsd_vec.
* bfd/configure: Regenerate.
* gas/config/tc-i386.c (md_parse_option): Treat any target starting with elf64_x86_64 as a viable target for the -64 switch.
(i386_target_format): For 64-bit ELF flavoured output use ELF_TARGET_FORMAT64.
* gas/config/tc-i386.h (ELF_TARGET_FORMAT64): Define.
* ld/emulparams/elf_x86_64_fbsd.sh (OUTPUT_FORMAT): Define as elf64-x86-64-freebsd.
2006-06-12 Fred Fish <fnf@specifix.com>
* emulparams/elf32bmip.sh (OTHER_SECTIONS): Keep the
".mdebug.<abi>" and ".gcc_compiled_long<size>" sections
generated by mips gcc.
* elf32-mips.c: Expand comment about ABI-mandated pagesize values.
(ELF_MAXPAGESIZE, ELF_COMMONPAGESIZE): define in a more obvious way.
* elf64-mips.c, elfn32-mips.c (ELF_MAXPAGESIZE): Fix value for IRIX6.
Delete old comments.
(ELF_COMMONPAGESIZE): Define in a more obvious way.
[ ld/ChangeLog ]
* emulparams/elf64bmip.sh, emulparams/elf64btsmip.sh (COMMONPAGESIZE):
Define.
[ ld/testsuite/ChangeLog ]
* ld-mips-elf/multi-got-no-shared.d: Adjust for recent change of
ELF_MAXPAGESIZE.
Daniel Jacobowitz <dan@codesourcery.com>
Phil Edwards <phil@codesourcery.com>
Zack Weinberg <zack@codesourcery.com>
Mark Mitchell <mark@codesourcery.com>
Nathan Sidwell <nathan@codesourcery.com>
bfd/
* bfd-in2.h: Regenerate.
* config.bfd (mips*-*-vxworks*, mips*el-*-vxworks*): New stanzas.
* configure.in (bfd_elf32_bigmips_vxworks_vec): New stanza.
(bfd_elf32_littlemips_vxworks_vec): Likewise.
(bfd_elf32_bigmips_vec): Add elf-vxworks.lo.
(bfd_elf32_littlemips_vec): Likewise.
(bfd_elf32_nbigmips_vec): Likewise.
(bfd_elf32_nlittlemips_vec): Likewise.
(bfd_elf32_ntradbigmips_vec): Likewise.
(bfd_elf32_ntradlittlemips_vec): Likewise.
(bfd_elf32_tradbigmips_vec): Likewise.
(bfd_elf32_tradlittlemips_vec): Likewise.
(bfd_elf64_bigmips_vec): Likewise.
(bfd_elf64_littlemips_vec): Likewise.
(bfd_elf64_tradbigmips_vec): Likewise.
(bfd_elf64_tradlittlemips_vec): Likewise.
* elf32-mips.c: Include elf-vxworks.h.
(mips_info_to_howto_rel): Use elf_backend_mips_rtype_to_howto
instead of calling mips_elf32_rtype_to_howto directly.
(mips_vxworks_copy_howto_rela): New reloc howto.
(mips_vxworks_jump_slot_howto_rela): Likewise.
(mips_vxworks_bfd_reloc_type_lookup): New function.
(mips_vxworks_rtype_to_howto): Likewise.
(mips_vxworks_final_write_processing): Likewise.
(TARGET_LITTLE_SYM, TARGET_LITTLE_NAME): Override for VxWorks.
(TARGET_BIG_SYM, TARGET_BIG_NAME, elf_bed, ELF_MAXPAGESIZE): Likewise.
(elf_backend_want_got_plt): Likewise.
(elf_backend_want_plt_sym): Likewise.
(elf_backend_got_symbol_offset): Likewise.
(elf_backend_want_dynbss): Likewise.
(elf_backend_may_use_rel_p): Likewise.
(elf_backend_may_use_rela_p): Likewise.
(elf_backend_default_use_rela_p): Likewise.
(elf_backend_got_header_size: Likewise.
(elf_backend_plt_readonly): Likewise.
(bfd_elf32_bfd_reloc_type_lookup): Likewise.
(elf_backend_mips_rtype_to_howto): Likewise.
(elf_backend_adjust_dynamic_symbol): Likewise.
(elf_backend_finish_dynamic_symbol): Likewise.
(bfd_elf32_bfd_link_hash_table_create): Likewise.
(elf_backend_add_symbol_hook): Likewise.
(elf_backend_link_output_symbol_hook): Likewise.
(elf_backend_emit_relocs): Likewise.
(elf_backend_final_write_processing: Likewise.
(elf_backend_additional_program_headers): Likewise.
(elf_backend_modify_segment_map): Likewise.
(elf_backend_symbol_processing): Likewise.
* elfxx-mips.c: Include elf-vxworks.h.
(mips_elf_link_hash_entry): Add is_relocation_target and
is_branch_target fields.
(mips_elf_link_hash_table): Add is_vxworks, srelbss, sdynbss, srelplt,
srelplt2, sgotplt, splt, plt_header_size and plt_entry_size fields.
(MIPS_ELF_RELA_SIZE, MIPS_ELF_REL_DYN_NAME): New macros.
(MIPS_RESERVED_GOTNO): Take a mips_elf_link_hash_table argument.
Return 3 for VxWorks.
(ELF_MIPS_GP_OFFSET): Change the argument from a bfd to a
mips_elf_link_hash_table. Return 0 for VxWorks.
(MIPS_ELF_GOT_MAX_SIZE): Change the argument from a bfd to a
mips_elf_link_hash_table. Update the call to ELF_MIPS_GP_OFFSET.
(mips_vxworks_exec_plt0_entry): New variable.
(mips_vxworks_exec_plt_entry): Likewise.
(mips_vxworks_shared_plt0_entry): Likewise.
(mips_vxworks_shared_plt_entry): Likewise.
(mips_elf_link_hash_newfunc): Initialize the new hash_entry fields.
(mips_elf_rel_dyn_section): Change the bfd argument to a
mips_elf_link_hash_table. Use MIPS_ELF_REL_DYN_NAME to get
the name of the section.
(mips_elf_initialize_tls_slots): Update the call to
mips_elf_rel_dyn_section.
(mips_elf_gotplt_index): New function.
(mips_elf_local_got_index): Add an input_section argument.
Update the call to mips_elf_create_local_got_entry.
(mips_elf_got_page): Likewise.
(mips_elf_got16_entry): Likewise.
(mips_elf_create_local_got_entry): Add bfd_link_info and input_section
arguments. Create dynamic relocations for each entry on VxWorks.
(mips_elf_merge_gots): Update the use of MIPS_ELF_GOT_MAX_SIZE.
(mips_elf_multi_got): Update the uses of MIPS_ELF_GOT_MAX_SIZE
and MIPS_RESERVED_GOTNO.
(mips_elf_create_got_section): Update the uses of
MIPS_ELF_GOT_MAX_SIZE. Create .got.plt on VxWorks.
(is_gott_symbol): New function.
(mips_elf_calculate_relocation): Use a dynobj local variable.
Update the calls to mips_elf_local_got_index, mips_elf_got16_entry and
mips_elf_got_page_entry. Set G to the .got.plt entry when calculating
VxWorks R_MIPS_CALL* relocations. Calculate and use G for all GOT
relocations on VxWorks. Add dynamic relocations for references
to the VxWorks __GOTT_BASE__ and __GOTT_INDEX__ symbols. Don't
create dynamic relocations for R_MIPS_32, R_MIPS_REL32 or R_MIPS_64
in VxWorks executables.
(mips_elf_allocate_dynamic_relocations): Add a bfd_link_info argument.
Use MIPS_ELF_RELA_SIZE to calculate the size of a VxWorks entry.
Don't allocate a null entry on VxWorks.
(mips_elf_create_dynamic_relocation): Update the call to
mips_elf_rel_dyn_section. Use absolute rather than relative
relocations for VxWorks, and make them RELA rather than REL.
(_bfd_mips_elf_create_dynamic_sections): Don't make .dynamic
read-only on VxWorks. Update the call to mips_elf_rel_dyn_section.
Create the .plt, .rela.plt, .dynbss and .rela.bss sections on
VxWorks. Likewise create the _PROCEDURE_LINKAGE_TABLE symbol.
Call elf_vxworks_create_dynamic_sections for VxWorks and
initialize the plt_header_size and plt_entry_size fields.
(_bfd_mips_elf_check_relocs): Don't allow GOT relocations to be
used in VxWorks executables. Don't allocate dynamic relocations
for R_MIPS_32, R_MIPS_REL32 or R_MIPS_64 in VxWorks executables.
Set is_relocation_target for each symbol referenced by a relocation.
Allocate .rela.dyn entries for relocations against the special
VxWorks __GOTT_BASE__ and __GOTT_INDEX__ symbols. Create GOT
entries for all VxWorks R_MIPS_GOT16 relocations. Don't allocate
a global GOT entry for symbols mentioned in VxWorks R_MIPS_CALL*,
R_MIPS_32, R_MIPS_REL32 or R_MIPS_64 relocations. Update the calls
to mips_elf_rel_dyn_section and mips_elf_allocate_dynamic_relocations.
Set is_branch_target for symbols mentioned in R_MIPS_PC16 or R_MIPS_26
relocations. Don't set no_fn_stub on VxWorks.
(_bfd_mips_elf_adjust_dynamic_symbol): Update the call to
mips_elf_allocate_dynamic_relocations.
(_bfd_mips_vxworks_adjust_dynamic_symbol): New function.
(_bfd_mips_elf_always_size_sections): Do not allocate GOT page
entries for VxWorks, and do not create multiple GOTs.
(_bfd_mips_elf_size_dynamic_sections): Use MIPS_ELF_REL_DYN_NAME.
Handle .got specially for VxWorks. Update the uses of
MIPS_RESERVED_GOTNO and mips_elf_allocate_dynamic_relocations.
Check for sgotplt and splt. Allocate the .rel(a).dyn contents last,
once its final size is known. Set DF_TEXTREL for VxWorks. Add
DT_RELA, DT_RELASZ, DT_RELAENT, DT_PLTREL, DT_PLTRELSZ and DT_JMPREL
tags on VxWorks. Do not add the MIPS-specific tags for VxWorks.
(_bfd_mips_vxworks_finish_dynamic_symbol): New function.
(mips_vxworks_finish_exec_plt): Likewise.
(mips_vxworks_finish_shared_plt): Likewise.
(_bfd_mips_elf_finish_dynamic_sections): Remove an unncessary call
to mips_elf_rel_dyn_section. Use a VxWorks-specific value of
DT_PLTGOT. Handle DT_RELA, DT_RELASZ, DT_RELAENT, DT_PLTREL,
DT_PLTRELSZ and DT_JMPREL. Update the uses of MIPS_RESERVED_GOTNO
and mips_elf_rel_dyn_section. Use a different GOT header for
VxWorks. Don't sort .rela.dyn on VxWorks. Finish the PLT on VxWorks.
(_bfd_mips_elf_link_hash_table_create): Initialize the new
mips_elf_link_hash_table fields.
(_bfd_mips_vxworks_link_hash_table_create): New function.
(_bfd_mips_elf_final_link): Set the GP value to _GLOBAL_OFFSET_TABLE_
on VxWorks. Update the call to ELF_MIPS_GP_OFFSET.
* elfxx-mips.h (_bfd_mips_vxworks_adjust_dynamic_symbol): Declare.
(_bfd_mips_vxworks_finish_dynamic_symbol): Likewise.
(_bfd_mips_vxworks_link_hash_table_create): Likewise.
* libbfd.h: Regenerate.
* Makefile.am (elfxx-mips.lo): Depend on elf-vxworks.h.
(elf32-mips.lo): Likewise.
* Makefile.in: Regenerate.
* reloc.c (BFD_RELOC_MIPS_COPY, BFD_RELOC_MIPS_JUMP_SLOT): Declare.
* targets.c (bfd_elf32_bigmips_vxworks_vec): Declare.
(bfd_elf32_littlemips_vxworks_vec): Likewise.
(_bfd_target_vector): Add entries for them.
gas/
* config/tc-mips.c (mips_target_format): Handle vxworks targets.
(md_begin): Complain about -G being used for PIC. Don't change
the text, data and bss alignments on VxWorks.
(reloc_needs_lo_p): Don't return true for R_MIPS_GOT16 when
generating VxWorks PIC.
(load_address): Extend SVR4_PIC handling to VXWORKS_PIC.
(macro): Likewise, but do not treat la $25 specially for
VxWorks PIC, and do not handle jal.
(OPTION_MVXWORKS_PIC): New macro.
(md_longopts): Add -mvxworks-pic.
(md_parse_option): Don't complain about using PIC and -G together here.
Handle OPTION_MVXWORKS_PIC.
(md_estimate_size_before_relax): Always use the first relaxation
sequence on VxWorks.
* config/tc-mips.h (VXWORKS_PIC): New.
gas/testsuite/
* gas/mips/vxworks1.s, gas/mips/vxworks1.d,
* gas/mips/vxworks1-xgot.d: New tests.
* gas/mips/mips.exp: Run them. Do not run other tests on VxWorks.
include/elf/
* mips.h (R_MIPS_COPY, R_MIPS_JUMP_SLOT): New relocs.
ld/
* configure.tgt (mips*el-*-vxworks*, mips*-*-vxworks*): Use
separate VxWorks emulations.
* emulparams/elf32ebmipvxworks.sh: New file.
* emulparams/elf32elmipvxworks.sh: New file.
* Makefile.am (ALL_EMULATIONS): Add eelf32ebmipvxworks.o and
eelf32elmipvxworks.o.
(eelf32ebmipvxworks.c, eelf32elmipvxworks.c): New rules.
* Makefile.in: Regenerate.
ld/testsuite/
* ld-mips/vxworks1.dd, ld-mips/vxworks1.ld, ld-mips/vxworks1-lib.dd,
* ld-mips/vxworks1-lib.nd, ld-mips/vxworks1-lib.rd,
* ld-mips/vxworks1-lib.s, ld-mips/vxworks1.rd, ld-mips/vxworks1.s,
* ld-mips/vxworks1-static.d, ld-mips/vxworks2.s, ld-mips/vxworks2.sd,
* ld-mips/vxworks2-static.sd: New tests.
* ld-mips/mips-elf.exp: Run them.
* configure.in (bfd_elf32_bigarm_vec): Include elf-vxworks.lo.
(bfd_elf32_bigarm_symbian_vec): Likewise.
(bfd_elf32_bigarm_vxworks_vec): Likewise.
(bfd_elf32_littlearm_vec): Likewise.
(bfd_elf32_littlearm_symbian_vec): Likewise.
(bfd_elf32_littlearm_vxworks_vec): Likewise.
* configure: Regenerate.
* elf32-arm.c: Include libiberty.h and elf-vxworks.h.
(RELOC_SECTION, RELOC_SIZE, SWAP_RELOC_IN, SWAP_RELOC_OUT): New macros.
(elf32_arm_vxworks_bed): Add forward declaration.
(elf32_arm_howto_table_1): Fix the masks for R_ASM_ABS12.
(elf32_arm_vxworks_exec_plt0_entry): New table.
(elf32_arm_vxworks_exec_plt_entry): Likewise.
(elf32_arm_vxworks_shared_plt_entry): Likewise.
(elf32_arm_link_hash_table): Add vxworks_p and srelplt2 fields.
(reloc_section_p): New function.
(create_got_section): Use RELOC_SECTION.
(elf32_arm_create_dynamic_sections): Likewise. Call
elf_vxworks_create_dynamic_sections for VxWorks targets.
Choose between the two possible values of plt_header_size
and plt_entry_size.
(elf32_arm_link_hash_table_create): Initialize vxworks_p and srelplt2.
(elf32_arm_abs12_reloc): New function.
(elf32_arm_final_link_relocate): Call it. Allow the creation of
dynamic R_ARM_ABS12 relocs on VxWorks. Use reloc_section_p,
RELOC_SIZE, SWAP_RELOC_OUT and RELOC_SECTION. Initialize the
r_addend fields of relocs. On rela targets, skip any code that
adjusts in-place addends. When using _bfd_link_final_relocate
to perform a final relocation, pass rel->r_addend as the addend
argument.
(elf32_arm_merge_private_bfd_data): If one of the bfds is a VxWorks
object, ignore flags that are not standard on VxWorks.
(elf32_arm_check_relocs): Allow the creation of dynamic R_ARM_ABS12
relocs on VxWorks. Use reloc_section_p.
(elf32_arm_adjust_dynamic_symbol): Use RELOC_SECTION and RELOC_SIZE.
(allocate_dynrelocs): Use RELOC_SIZE. Account for the size of
.rela.plt.unloaded relocs on VxWorks targets.
(elf32_arm_size_dynamic_sections): Use RELOC_SIZE. Check for
.rela.plt.unloaded as well as .rel(a).plt. Add DT_RELA* tags
instead of DT_REL* tags on RELA targets.
(elf32_arm_finish_dynamic_symbol): Use RELOC_SECTION, RELOC_SIZE
and SWAP_RELOC_OUT. Initialize r_addend fields. Handle VxWorks
PLT entries. Do not make _GLOBAL_OFFSET_TABLE_ absolute on VxWorks.
(elf32_arm_finish_dynamic_sections): Use RELOC_SECTION, RELOC_SIZE
and SWAP_RELOC_OUT. Initialize r_addend fields. Handle DT_RELASZ
like DT_RELSZ. Handle the VxWorks form of initial PLT entry.
Correct the .rela.plt.unreloaded symbol indexes.
(elf32_arm_output_symbol_hook): Call the VxWorks version of this
hook on VxWorks targets.
(elf32_arm_vxworks_link_hash_table_create): Set vxworks_p to true.
Minor formatting tweak.
(elf32_arm_vxworks_final_write_processing): New function.
(elf_backend_add_symbol_hook): Override for VxWorks and reset
for Symbian.
(elf_backend_final_write_processing): Likewise.
(elf_backend_emit_relocs): Likewise.
(elf_backend_want_plt_sym): Likewise.
(ELF_MAXPAGESIZE): Likewise.
(elf_backend_may_use_rel_p): Minor formatting tweak.
(elf_backend_may_use_rela_p): Likewise.
(elf_backend_default_use_rela_p): Likewise.
(elf_backend_rela_normal): Likewise.
* Makefile.in (elf32-arm.lo): Depend on elf-vxworks.h.
gas/
* config/tc-arm.c (md_apply_fix): Install a value of zero into a
BFD_RELOC_ARM_OFFSET_IMM field if we're going to generate a RELA
R_ARM_ABS12 reloc.
(tc_gen_reloc): Keep the original fx_offset for RELA pc-relative
relocs, but adjust by md_pcrel_from_section. Create R_ARM_ABS12
relocations for BFD_RELOC_ARM_OFFSET_IMM on RELA targets.
gas/testsuite/
* gas/arm/abs12.s, gas/arm/abs12.d: New test.
* gas/arm/pic.d: Skip for *-*-vxworks*...
* gas/arm/pic_vxworks.d: ...use this version instead.
* gas/arm/unwind_vxworks.d: Fix expected output.
ld/
* emulparams/armelf_vxworks.sh: Include vxworks.sh.
(MAXPAGESIZE): Define.
* emulparams/vxworks.sh: Undefine.
* Makefile.am (earmelf_vxworks.c): Depend on vxworks.sh and vxworks.em.
* Makefile.in: Regenerate.
ld/testsuite/
* ld-arm/vxworks1.dd, ld-arm/vxworks1.ld, ld-arm/vxworks1-lib.dd,
* ld-arm/vxworks1-lib.nd, ld-arm/vxworks1-lib.rd,
* ld-arm/vxworks1-lib.s, ld-arm/vxworks1.rd, ld-arm/vxworks1.s,
* ld-arm/vxworks1-static.d, ld-arm/vxworks2.s, ld-arm/vxworks2.sd,
* ld-arm/vxworks2-static.sd: New tests.
* ld-arm/arm-elf.exp: Run them.
* elf32-ppc.c (ppc_elf_plt_type): New enumeration.
(ppc_elf_link_hash_table): Replace old_got and new_got with
plt_type and can_use_new_plt.
(ppc_elf_create_dynamic_sections): Add SEC_HAS_CONTENTS,
SEC_LOAD and SEC_READONLY to the VxWorks .plt flags.
(ppc_elf_check_relocs): Set can_use_new_plt instead of new_plt.
Move from plt_type == PLT_UNSET to PLT_OLD instead of setting old_plt.
(ppc_elf_select_plt_layout): Move from plt_type == PLT_UNSET to
either plt_type == PLT_OLD or plt_type == PLT_NEW. Assert that
this function should not be called for VxWorks targets.
(ppc_elf_tls_setup): Use plt_type instead of old_got.
(allocate_got): Likewise. Rearrange so that max_before_header
is only used for PLT_OLD and PLT_NEW.
(allocate_dynrelocs): Use plt_type instead of old_got and is_vxworks.
(ppc_elf_size_dynamic_sections): Likewise.
(ppc_elf_relax_section): Likewise.
(ppc_elf_relocate_section): Likewise.
(ppc_elf_finish_dynamic_symbol): Likewise.
(ppc_elf_vxworks_link_hash_table_create): Initialize plt_type.
ld/
* emulparams/elf32ppccommon.sh: New file, extracted from...
* emulparams/elf32ppc.sh: ...here.
* emulparams/elf32ppcvxworks.sh: Include elf32ppccommon.sh
instead of elf32ppc.sh.
(BSS_PLT): Remove override.
* Makefile.am (eelf32lppc.c): Depend on elf32ppccommons.h.
(eelf32lppcnto.c, eelf32lppcsim.c, eelf32ppcnto.c): Likewise.
(eelf32ppc.c, eelf32ppc_fbsd.c, eelf32ppcsimm): Likewise.
(eelf32ppclinux.c): Likewise.
(eelf32ppcvxworks.c): Likewise. Add missing vxworks.sh dependency.
* Makefile.in: Regenerate.
ld/testsuite/
* ld-powerpc/vxworks1-lib.s, ld-powerpc/vxworks1-lib.dd,
* ld-powerpc/vxworks1-lib.rd, ld-powerpc/vxworks1.s,
* ld-powerpc/vxworks1.dd, ld-powerpc/vxworks1.rd,
* ld-powerpc/vxworks1.ld, ld-powerpc/vxworks1.sd: New test.
* ld-powerpc/powerpc.exp: Run it.
2005-07-14 Jim Blandy <jimb@redhat.com>
* configure.in: Add cases for Renesas m32c.
* configure: Regenerated.
bfd/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
Add support for m32c-*-elf (Renesas m32c and m16c).
* Makefile.am (ALL_MACHINES): Add cpu-m32c.lo.
(ALL_MACHINES_CFILES): Add cpu-m32c.c.
(BFD32_BACKENDS): Add elf32-m32c.lo.
(BFD32_BACKENDS_CFILES): Add elf32-m32c.c.
(cpu-m32c.lo, elf32-m32c.lo): New rules, generated by 'make dep-am'.
* Makefile.in: Regenerated.
* archures.c (bfd_arch_m32c, bfd_mach_m16c, bfd_mach_m32c): New
arch and mach codes.
(bfd_m32c_arch): New arch info object.
(bfd_archures_list): List bfd_m32c_arch.
* bfd-in2.h: Regenerated.
* config.bfd: Add case for the m32c.
* configure.in: Add case for the m32c.
* configure: Regenerated.
* cpu-m32c.c, elf32-m32c.c: New files.
* libbfd.h: Regenerated.
* targets.c (bfd_elf32_m32c_vec): Declare.
(_bfd_target_vector): List bfd_elf32_m32c_vec.
binutils/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
* readelf.c: #include "elf/m32c.h"
(guess_is_rela, dump_relocations, get_machine_name): Add cases for
EM_M32C.
* Makefile.am (readelf.o): Update dependencies.
* Makefile.in: Regenerated.
cpu/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
* m32c.cpu, m32c.opc: Machine description for the Renesas M32C.
gas/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
Add support for the Renesas M32C.
* Makefile.am (CPU_TYPES): List m32c.
(TARGET_CPU_CFILES): List config/tc-m32c.c.
(TARGET_CPU_HFILES): List config/tc-m32c.h.
* configure.in: Add case for m32c.
* configure.tgt: Add cases for m32c and m32c-*-elf.
* configure: Regenerated.
* config/tc-m32c.c, config/tc-m32c.h: New files.
* doc/Makefile.am (CPU_DOCS): Add c-m32c.texi.
* doc/Makefile.in: Regenerated.
* doc/all.texi: Set M32C.
* doc/as.texinfo: Add text for the M32C-specific options and line
comment characters, and refer to c-m32c.texi.
* doc/c-m32c.texi: New file.
include/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
* dis-asm.h (print_insn_m32c): New declaration.
include/elf/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
Add support for Renesas M32C and M16C.
* common.h (EM_M32C): New machine number.
* m32c.h: New file.
ld/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
Add support for the Renesas M32C and M16C.
* Makefile.am (ALL_EMULATIONS): Add eelf32m32c.o.
(eelf32m32c.c): New target.
* Makefile.in: Regenerated.
* configure.tgt: Add case for m32c-*-elf.
* emulparams/elf32m32c.sh: New file.
opcodes/ChangeLog:
2005-07-14 Jim Blandy <jimb@redhat.com>
Add support for the Renesas M32C and M16C.
* m32c-asm.c, m32c-desc.c, m32c-dis.c, m32c-ibld.c, m32c-opc.c: New.
* m32c-desc.h, m32c-opc.h: New.
* Makefile.am (HFILES): List m32c-desc.h and m32c-opc.h.
(CFILES): List m32c-asm.c, m32c-desc.c, m32c-dis.c, m32c-ibld.c,
m32c-opc.c.
(ALL_MACHINES): List m32c-asm.lo, m32c-desc.lo, m32c-dis.lo,
m32c-ibld.lo, m32c-opc.lo.
(CLEANFILES): List stamp-m32c.
(M32C_DEPS): List stamp-m32c, if CGEN_MAINT.
(CGEN_CPUS): Add m32c.
(m32c-asm.c, m32c-desc.c, m32c-dis.c, m32c-ibld.c, m32c-opc.c)
(m32c-desc.h, m32c-opc.h): Depend on M32C_DEPS.
(m32c_opc_h): New variable.
(stamp-m32c, m32c-asm.lo, m32c-desc.lo, m32c-dis.lo, m32c-ibld.lo)
(m32c-opc.lo): New rules.
* Makefile.in: Regenerated.
* configure.in: Add case for bfd_m32c_arch.
* configure: Regenerated.
* disassemble.c (ARCH_m32c): New.
[ARCH_m32c]: #include "m32c-desc.h".
(disassembler) [ARCH_m32c]: Add case for bfd_arch_m32c.
(disassemble_init_for_target) [ARCH_m32c]: Same.
* cgen-ops.h, cgen-types.h: New files.
* Makefile.am (HFILES): List them.
* Makefile.in: Regenerated.
bfd/
* config.bfd: Use bfd_elf32_i386_vxworks_vec for i?86-*-vxworks.
* configure.in: Add bfd_elf32_i386_vxworks_vec. i386 targets need
elf-vxworks.lo.
* configure: Regenerate.
* Makefile.am (BFD32_BACKENDS): Add elf-vxworks.lo.
(BFD32_BACKENDS_CFILES): Add elf-vxworks.c.
(elf32-i386.lo): Depend on elf-vxworks.h.
(elf-vxworks.lo): New rule.
* Makefile.in: Regenerate.
* elf-bfd.h (elf_backend_data): Update type of
elf_backend_emit_relocs.
(_bfd_elf_link_output_relocs): Update prototype.
* elflink.c (_bfd_elf_link_output_relocs): Always use
bed->elf_backend_emit_relocs when outputting relocations.
* elfxx-target.h (elf_backend_emit_relocs): Default to
_bfd_elf_link_output_relocs.
* targets.c (bfd_elf32_i386_vxworks_vec): Declare.
(_bfd_target_vector): Add bfd_elf32_i386_vxworks_vec.
* elf32-i386.c: Add elf32-i386-vxworks target BFD.
(elf_i386_plt0_entry): Remove padding.
(elf_i386_pic_plt0_entry): Ditto.
(PLTRESOLVE_RELOCS_SHLIB, PLTRESOLVE_RELOCS): Define.
(PLT_NON_JUMP_SLOT_RELOCS): Define.
(elf_i386_link_hash_table): Add srelplt2, hgot, hplt, is_vxworks and
plt0_pad_byte fields.
(elf_i386_link_hash_table_create): Zero them.
(elf_i386_create_dynamic_sections): Create static relocation section.
(allocate_dynrelocs): Allocate space for static PLT relocations.
(elf_i386_size_dynamic_sections): Save shortcuts to PLT and GOT
symbols. Give PLT symbols function type. Don't strip PLT sections
if we have exported symbols from them.
(elf_i386_finish_dynamic_symbol): Fill in VxWorks PLT static
relocation section. Don't mark _GLOBAL_OFFSET_TABLE_ as absolute on
VxWorks.
(elf_i386_finish_dynamic_sections): Allow different pad bytes.
Add relocation for GOT location. Fill in PLT static relocations.
(elf_i386_vxworks_link_hash_table_create): New function.
(elf_i386_vxworks_link_output_symbol_hook): New function.
* elf-vxworks.h: New file.
gas/
* config/tc-i386.h (ELF_TARGET_FORMAT): Define for TE_VXWORKS.
gas/testsuite/
* gas/i386/i386.exp: Don't run divide test on vxworks.
ld/
* Makefile.am: Add eelf_i386_vxworks.
* Makefile.in: Regenerate.
* configure.tgt: Make i?86-*-vxworks use targ_emul=elf_i386_vxworks.
* emulparams/elf_i386_vxworks.sh: New file.
* emulparams/vxworks.sh: New file.
* scripttempl/elf.sc: Add DATA_END_SYMBOLS and ETEXT_NAME.
* elf32-ppc.c (ppc_elf_create_linker_section): Set SEC_LINKER_CREATED
on section. Correct comment, and add FIXME.
(ppc_elf_additional_program_headers): Don't bump header count for
interp. Test SEC_ALLOC, not SEC_LOAD, and don't test size.
(ppc_elf_size_dynamic_sections): Don't strip sdata and sdata2, but
do allocate memory if they need it.
ld/
* emulparams/elf32ppclinux.sh (OTHER_READWRITE_SECTION): Delete.
(OTHER_RELRO_SECTIONS): Set this instead.
ld/testsuite/
* ld-powerpc/tlsexe32.d: Update.
* ld-powerpc/tlsexe32.g: Update.
* ld-powerpc/tlsexe32.r: Update.
* ld-powerpc/tlsexe32.t: Update.
* ld-powerpc/tlsso32.d: Update.
* ld-powerpc/tlsso32.g: Update.
* ld-powerpc/tlsso32.r: Update.
* ld-powerpc/tlsso32.t: Update.
SymbianOS.
* emulparams/armsymbian.sh (OTHER_READONLY_SECTIONS): Define, so
as to include .ARM.exidx$${Base,Limit}.
* ld/scripttempl/armbpabi.sc: Move .plt to end of text segment.
Define IMAGE$$ER_RO$${Base,Limit} and SHT$$INIT_ARRAY$${Base,Limit}.
Put .init_array, .fini_array, etc. into the read-only data
segment.
(earmelf_linux_eabi.c): New target.
* configure.tgt (arm*-*-linux-gnueabi): Handle it.
* emulparams/armelf_linux_eabi.sh: New file.
* Makefile.in: Regenerated.
* ldexp.h (segment_type): New type.
(segments): New variable.
* ldexp.c (segments): New variable.
(exp_print_token): Handle SEGMENT_START.
(fold_binary): Likewise.
* ldgram.y (SEGMENT_START): Declare it as a token.
(exp): Handle SEGMENT_START.
* ldlang.h (lang_address_statement_type): Add segment field.
(lang_section_start): Change prototype.
* ldlang.c (map_input_to_output_sections): Do not process section
assignments if a corresponding SEGMENT_START has already been
seen.
(lang_section_start): Add segment parameter.
* ldlex.l (SEGMENT_START): Add it.
* lexsup.c (seg_segment_start): New function.
(parse_args): Use it for -Tbss, -Tdata, and -Ttext.
* ld.texinfo (SEGMENT_START): Document it.
* emulparams/armsymbian.sh (EMBEDDED): Set it.
* scripttempl/armbpabi.sc: Use SEGMENT_START to control segment
base addresses. Do not map relocations.
* NEWS: Mention SEGMENT_START.
* elf32-xtensa.c (elf32xtensa_size_opt): New global variable.
(xtensa_default_isa): Global variable moved here from xtensa-isa.c.
(elf32xtensa_no_literal_movement): New global variable.
(elf_howto_table): Add entries for new relocations.
(elf_xtensa_reloc_type_lookup): Handle new relocations.
(property_table_compare): When addresses are equal, compare sizes and
various property flags.
(property_table_matches): New.
(xtensa_read_table_entries): Extend to read new property tables. Add
output_addr parameter to indicate that output addresses should be used.
Use bfd_get_section_limit.
(elf_xtensa_find_property_entry): New.
(elf_xtensa_in_literal_pool): Use elf_xtensa_find_property_entry.
(elf_xtensa_check_relocs): Handle new relocations.
(elf_xtensa_do_reloc): Use bfd_get_section_limit. Handle new
relocations. Use new xtensa-isa.h functions.
(build_encoding_error_message): Remove encode_result parameter. Add
new target_address parameter used to detect alignment errors.
(elf_xtensa_relocate_section): Use bfd_get_section_limit. Clean up
error handling. Use new is_operand_relocation function.
(elf_xtensa_combine_prop_entries, elf_xtensa_merge_private_bfd_data):
Use underbar macro for error messages. Formatting.
(get_const16_opcode): New.
(get_l32r_opcode): Add a separate flag for initialization.
(get_relocation_opnd): Operand number is no longer explicit in the
relocation. Change to decode the opcode and analyze its operands.
(get_relocation_slot): New.
(get_relocation_opcode): Add bfd parameter. Use bfd_get_section_limit.
Use new xtensa-isa.h functions to handle multislot instructions.
(is_l32r_relocation): Add bfd parameter. Use is_operand_relocation.
(get_asm_simplify_size, is_alt_relocation, is_operand_relocation,
insn_decode_len, insn_decode_opcode, check_branch_target_aligned,
check_loop_aligned, check_branch_target_aligned_address, narrowable,
widenable, narrow_instruction, widen_instruction, op_single_fmt_table,
get_single_format, init_op_single_format_table): New.
(elf_xtensa_do_asm_simplify): Add error_message parameter and use it
instead of calling _bfd_error_handler. Use new xtensa-isa.h functions.
(contract_asm_expansion): Add error_message parameter and pass it to
elf_xtensa_do_asm_simplify. Replace use of R_XTENSA_OP0 relocation
with R_XTENSA_SLOT0_OP.
(get_expanded_call_opcode): Extend to handle either L32R or CONST16
instructions. Use new xtensa-isa.h functions.
(r_reloc struct): Add new virtual_offset field.
(r_reloc_init): Add contents and content_length parameters. Set
virtual_offset field to zero. Add contents to target_offset field for
partial_inplace relocations.
(r_reloc_is_defined): Check for null.
(print_r_reloc): New debug function.
(source_reloc struct): Replace xtensa_operand field with pair of the
opcode and the operand position. Add is_abs_literal field.
(init_source_reloc): Specify operand by opcode/position pair. Set
is_abs_literal field.
(source_reloc_compare): When target_offsets are equal, compare other
fields to make sorting predictable.
(literal_value struct): Add is_abs_literal field.
(value_map_hash_table struct): Add has_last_loc and last_loc fields.
(init_literal_value): New.
(is_same_value): Replace with ...
(literal_value_equal): ... this function. Add comparisons of
virtual_offset and is_abs_literal fields.
(value_map_hash_table_init): Use bfd_zmalloc. Check for allocation
failure. Initialize has_last_loc field.
(value_map_hash_table_delete): New.
(hash_literal_value): Rename to ...
(literal_value_hash): ... this. Include is_abs_literal flag and
virtual_offset field in the hash value.
(get_cached_value): Rename to ...
(value_map_get_cached_value): ... this. Update calls to
literal_value_hash and literal_value_equal.
(add_value_map): Check for allocation failure. Update calls to
value_map_get_cached_value and literal_value_hash.
(text_action, text_action_list, text_action_t): New types.
(find_fill_action, compute_removed_action_diff, adjust_fill_action,
text_action_add, text_action_add_literal, offset_with_removed_text,
offset_with_removed_text_before_fill, find_insn_action,
print_action_list, print_removed_literals): New.
(offset_with_removed_literals): Delete.
(xtensa_relax_info struct): Add is_relaxable_asm_section, action_list,
fix_array, fix_array_count, allocated_relocs, relocs_count, and
allocated_relocs_count fields.
(init_xtensa_relax_info): Initialize new fields.
(reloc_bfd_fix struct): Add new translated field.
(reloc_bfd_fix_init): Add translated parameter and use it to set the
translated field.
(fix_compare, cache_fix_array): New.
(get_bfd_fix): Remove fix_list parameter and get all relax_info for the
section via get_xtensa_relax_info. Use cache_fix_array to set up
sorted fix_array and use bsearch instead of linear search.
(section_cache_t): New struct.
(init_section_cache, section_cache_section, clear_section_cache): New.
(ebb_t, ebb_target_enum, proposed_action, ebb_constraint): New types.
(init_ebb_constraint, free_ebb_constraint, init_ebb, extend_ebb_bounds,
extend_ebb_bounds_forward, extend_ebb_bounds_backward,
insn_block_decodable_len, ebb_propose_action, ebb_add_proposed_action):
New.
(retrieve_contents): Use bfd_get_section_limit.
(elf_xtensa_relax_section): Add relocations_analyzed flag. Update call
to compute_removed_literals. Free value_map_hash_table when no longer
needed.
(analyze_relocations): Check is_relaxable_asm_section flag. Call
compute_text_actions for all sections.
(find_relaxable_sections): Mark sections as relaxable if they contain
ASM_EXPAND relocations that can be optimized. Adjust r_reloc_init
call. Increment relax_info src_count field only for appropriate
relocation types. Remove is_literal_section check.
(collect_source_relocs): Use bfd_get_section_limit. Adjust calls to
r_reloc_init and find_associated_l32r_irel. Check
is_relaxable_asm_section flag. Handle L32R instructions with absolute
literals. Pass is_abs_literal flag to init_source_reloc.
(is_resolvable_asm_expansion): Use bfd_get_section_limit. Check for
CONST16 instructions. Adjust calls to r_reloc_init and
pcrel_reloc_fits. Handle weak symbols conservatively.
(find_associated_l32r_irel): Add bfd parameter and pass it to
is_l32r_relocation.
(compute_text_actions, compute_ebb_proposed_actions,
compute_ebb_actions, check_section_ebb_pcrels_fit,
check_section_ebb_reduces, text_action_add_proposed,
compute_fill_extra_space): New.
(remove_literals): Replace with ...
(compute_removed_literals): ... this function. Call
init_section_cache. Use bfd_get_section_limit. Sort internal_relocs.
Call xtensa_read_table_entries to get the property table. Skip
relocations other than R_XTENSA_32 and R_XTENSA_PLT. Use new
is_removable_literal, remove_dead_literal, and
identify_literal_placement functions.
(get_irel_at_offset): Rewrite to use bsearch on sorted relocations
instead of linear search.
(is_removable_literal, remove_dead_literal,
identify_literal_placement): New.
(relocations_reach): Update check for literal not referenced by any
PC-relative relocations. Adjust call to pcrel_reloc_fits.
(coalesce_shared_literal, move_shared_literal): New.
(relax_section): Use bfd_get_section_limit. Call
translate_section_fixes. Update calls to r_reloc_init and
offset_with_removed_text. Check new is_relaxable_asm_section flag.
Add call to pin_internal_relocs. Add special handling for
R_XTENSA_ASM_SIMPLIFY and R_XTENSA_DIFF* relocs. Use virtual_offset
info to calculate new addend_displacement variable. Replace code for
deleting literals with more general code to perform the actions
determined by the action_list for the section.
(translate_section_fixes, translate_reloc_bfd_fix): New.
(translate_reloc): Check new is_relaxable_asm_section flag. Call
find_removed_literal only if is_operand_relocation. Update call to
offset_with_removed_text. Use new target_offset and removed_bytes
variables.
(move_literal): New.
(relax_property_section): Use bfd_get_section_limit. Set new
is_full_prop_section flag and handle new property tables. Update calls
to r_reloc_init and offset_with_removed_text. Check
is_relaxable_asm_section flag. Handle expansion of zero-sized
unreachable entries, with use of offset_with_removed_text_before_fill.
For relocatable links, combine entries only for literal tables.
(relax_section_symbols): Check is_relaxable_asm_section flag. Update
calls to offset_with_removed_text. Translate st_size field for
function symbols.
(do_fix_for_relocatable_link): Change to return bfd_boolean to indicate
failure. Add contents parameter. Update call to get_bfd_fix. Update
call to r_reloc_init. Call _bfd_error_handler and return FALSE for
R_XTENSA_ASM_EXPAND relocs.
(do_fix_for_final_link): Add input_bfd and contents parameters. Update
call to get_bfd_fix. Include offset from contents for partial_inplace
relocations.
(is_reloc_sym_weak): New.
(pcrel_reloc_fits): Use new xtensa-isa.h functions.
(prop_sec_len): New.
(xtensa_is_property_section): Handle new property sections.
(is_literal_section): Delete.
(internal_reloc_compare): When r_offset matches, compare r_info and
r_addend to make sorting predictable.
(internal_reloc_matches): New.
(xtensa_get_property_section_name): Handle new property sections.
(xtensa_get_property_predef_flags): New.
(xtensa_callback_required_dependence): Use bfd_get_section_limit.
Update calls to xtensa_isa_init, is_l32r_relocation, and r_reloc_init.
* xtensa-isa.c (xtensa_default_isa): Moved to elf32-xtensa.c.
(xtisa_errno, xtisa_error_msg): New variables.
(xtensa_isa_errno, xtensa_isa_error_msg): New.
(xtensa_insnbuf_alloc): Add error handling.
(xtensa_insnbuf_to_chars): Add num_chars parameter. Update to
use xtensa_format_decode. Add error handling.
(xtensa_insnbuf_from_chars): Add num_chars parameter. Decode the
instruction length to find the number of bytes to copy.
(xtensa_isa_init): Add error handling. Replace calls to
xtensa_load_isa and xtensa_extend_isa with code to initialize lookup
tables in the xtensa_modules structure.
(xtensa_check_isa_config, xtensa_add_isa, xtensa_load_isa,
xtensa_extend_isa): Delete.
(xtensa_isa_free): Change to only free lookup tables.
(opname_lookup_compare): Replace with ...
(xtensa_isa_name_compare): ... this function. Use strcasecmp.
(xtensa_insn_maxlength): Rename to ...
(xtensa_isa_maxlength): ... this.
(xtensa_insn_length): Delete.
(xtensa_insn_length_from_first_byte): Replace with ...
(xtensa_isa_length_from_chars): ... this function.
(xtensa_num_opcodes): Rename to ...
(xtensa_isa_num_opcodes): ... this.
(xtensa_isa_num_pipe_stages, xtensa_isa_num_formats,
xtensa_isa_num_regfiles, xtensa_isa_num_stages,
xtensa_isa_num_sysregs, xtensa_isa_num_interfaces,
xtensa_isa_num_funcUnits, xtensa_format_name, xtensa_format_lookup,
xtensa_format_decode, xtensa_format_encode, xtensa_format_length,
xtensa_format_num_slots, xtensa_format_slot_nop_opcode,
xtensa_format_get_slot, xtensa_format_set_slot): New functions.
(xtensa_opcode_lookup): Add error handling.
(xtensa_decode_insn): Replace with ...
(xtensa_opcode_decode): ... this function, with new format and
slot parameters. Add error handling.
(xtensa_encode_insn): Replace with ...
(xtensa_opcode_encode): ... this function, which does the encoding via
one of the entries in the "encode_fns" array. Add error handling.
(xtensa_opcode_name): Add error handling.
(xtensa_opcode_is_branch, xtensa_opcode_is_jump, xtensa_opcode_is_loop,
xtensa_opcode_is_call): New.
(xtensa_num_operands): Replace with ...
(xtensa_opcode_num_operands): ... this function. Add error handling.
(xtensa_opcode_num_stateOperands,
xtensa_opcode_num_interfaceOperands, xtensa_opcode_num_funcUnit_uses,
xtensa_opcode_funcUnit_use, xtensa_operand_name,
xtensa_operand_is_visible): New.
(xtensa_get_operand, xtensa_operand_kind): Delete.
(xtensa_operand_inout): Add error handling and special-case for
"sout" operands.
(xtensa_operand_get_field, xtensa_operand_set_field): Rewritten to
operate on one slot of an instruction. Added error handling.
(xtensa_operand_encode): Handle default operands with no encoding
functions. Check for success by comparing against decoded value.
Add error handling.
(xtensa_operand_decode): Handle default operands. Return decoded value
through argument pointer. Add error handling.
(xtensa_operand_is_register, xtensa_operand_regfile,
xtensa_operand_num_regs, xtensa_operand_is_known_reg): New.
(xtensa_operand_isPCRelative): Rename to ...
(xtensa_operand_is_PCrelative): ... this. Add error handling.
(xtensa_operand_do_reloc, xtensa_operand_undo_reloc): Return value
through argument pointer. Add error handling.
(xtensa_stateOperand_state, xtensa_stateOperand_inout,
xtensa_interfaceOperand_interface, xtensa_regfile_lookup,
xtensa_regfile_lookup_shortname, xtensa_regfile_name,
xtensa_regfile_shortname, xtensa_regfile_view_parent,
xtensa_regfile_num_bits, xtensa_regfile_num_entries,
xtensa_state_lookup, xtensa_state_name, xtensa_state_num_bits,
xtensa_state_is_exported, xtensa_sysreg_lookup,
xtensa_sysreg_lookup_name, xtensa_sysreg_name, xtensa_sysreg_number,
xtensa_sysreg_is_user, xtensa_interface_lookup, xtensa_interface_name,
xtensa_interface_num_bits, xtensa_interface_inout,
xtensa_interface_has_side_effect, xtensa_funcUnit_lookup,
xtensa_funcUnit_name, xtensa_funcUnit_num_copies): New.
* xtensa-modules.c: Rewrite to use new data structures.
* reloc.c (BFD_RELOC_XTENSA_DIFF8, BFD_RELOC_XTENSA_DIFF16,
BFD_RELOC_XTENSA_DIFF32, BFD_RELOC_XTENSA_SLOT0_OP,
BFD_RELOC_XTENSA_SLOT1_OP, BFD_RELOC_XTENSA_SLOT2_OP,
BFD_RELOC_XTENSA_SLOT3_OP, BFD_RELOC_XTENSA_SLOT4_OP,
BFD_RELOC_XTENSA_SLOT5_OP, BFD_RELOC_XTENSA_SLOT6_OP,
BFD_RELOC_XTENSA_SLOT7_OP, BFD_RELOC_XTENSA_SLOT8_OP,
BFD_RELOC_XTENSA_SLOT9_OP, BFD_RELOC_XTENSA_SLOT10_OP,
BFD_RELOC_XTENSA_SLOT11_OP, BFD_RELOC_XTENSA_SLOT12_OP,
BFD_RELOC_XTENSA_SLOT13_OP, BFD_RELOC_XTENSA_SLOT14_OP,
BFD_RELOC_XTENSA_SLOT0_ALT, BFD_RELOC_XTENSA_SLOT1_ALT,
BFD_RELOC_XTENSA_SLOT2_ALT, BFD_RELOC_XTENSA_SLOT3_ALT,
BFD_RELOC_XTENSA_SLOT4_ALT, BFD_RELOC_XTENSA_SLOT5_ALT,
BFD_RELOC_XTENSA_SLOT6_ALT, BFD_RELOC_XTENSA_SLOT7_ALT,
BFD_RELOC_XTENSA_SLOT8_ALT, BFD_RELOC_XTENSA_SLOT9_ALT,
BFD_RELOC_XTENSA_SLOT10_ALT, BFD_RELOC_XTENSA_SLOT11_ALT,
BFD_RELOC_XTENSA_SLOT12_ALT, BFD_RELOC_XTENSA_SLOT13_ALT,
BFD_RELOC_XTENSA_SLOT14_ALT): Add new relocations.
* Makefile.am (xtensa-isa.lo, xtensa-modules.lo): Update dependencies.
* Makefile.in: Regenerate.
* bfd-in2.h: Likewise.
* libbfd.h: Likewise.
gas ChangeLog
* config/tc-xtensa.c (absolute_literals_supported): New global flag.
(UNREACHABLE_MAX_WIDTH): Define.
(XTENSA_FETCH_WIDTH): Delete.
(cur_vinsn, xtensa_fetch_width, xt_saved_debug_type, past_xtensa_end,
prefer_const16, prefer_l32r): New global variables.
(LIT4_SECTION_NAME): Define.
(lit4_state struct): Add lit4_seg_name and lit4_seg fields.
(XTENSA_PROP_*, GET_XTENSA_PROP_*, SET_XTENSA_PROP_*): Define.
(frag_flags struct): New.
(xtensa_block_info struct): Move from tc-xtensa.h. Add flags field.
(subseg_map struct): Add cur_total_freq and cur_target_freq fields.
(bitfield, bit_is_set, set_bit, clear_bit): Define.
(MAX_FORMATS): Define.
(op_placement_info struct, op_placement_table): New.
(O_pltrel, O_hi16, O_lo16): Define.
(directiveE enum): Rename directive_generics to directive_transform.
Delete directive_relax. Add directive_schedule,
directive_absolute_literals, and directive_last_directive.
(directive_info): Rename "generics" to "transform". Delete "relax".
Add "schedule" and "absolute-literals".
(directive_state): Adjust entries to match changes in directive_info.
(xtensa_relax_statesE, RELAX_IMMED_MAXSTEPS): Move to tc-xtensa.h.
(xtensa_const16_opcode, xtensa_movi_opcode, xtensa_movi_n_opcode,
xtensa_l32r_opcode, xtensa_nop_opcode, xtensa_rsr_lcount_opcode): New.
(xtensa_j_opcode, xtensa_rsr_opcode): Delete.
(align_only_targets, software_a0_b_retw_interlock,
software_avoid_b_j_loop_end, maybe_has_b_j_loop_end,
software_avoid_short_loop, software_avoid_close_loop_end,
software_avoid_all_short_loops, specific_opcode): Delete.
(warn_unaligned_branch_targets): New.
(workaround_a0_b_retw, workaround_b_j_loop_end, workaround_short_loop,
workaround_close_loop_end, workaround_all_short_loops): Default FALSE.
(option_[no_]link_relax, option_[no_]transform,
option_[no_]absolute_literals, option_warn_unaligned_targets,
option_prefer_l32r, option_prefer_const16, option_target_hardware):
New enum values.
(option_[no_]align_only_targets, option_literal_section_name,
option_text_section_name, option_data_section_name,
option_bss_section_name, option_eb, option_el): Delete.
(md_longopts): Add entries for: [no-]transform, [no-]absolute-literals,
warn-unaligned-targets, prefer-l32r, prefer-const16, [no-]link-relax,
and target-hardware. Delete entries for [no-]target-align-only,
literal-section-name, text-section-name, data-section-name, and
bss-section-name.
(md_parse_option): Handle new options and remove old ones. Accept but
ignore [no-]density options. Warn for [no-]generics and [no-]relax
and treat them as [no-]transform.
(md_show_usage): Add new options and remove old ones.
(xtensa_setup_hw_workarounds): New.
(md_pseudo_table): Change "word" entry to use xtensa_elf_cons. Add
"long", "short", "loc" and "frequency" entries.
(use_generics): Rename to ...
(use_transform): ... this function. Add past_xtensa_end check.
(use_longcalls): Add past_xtensa_end check.
(code_density_available, can_relax): Delete.
(do_align_targets): New.
(get_directive): Accept dashes in directive names. Warn about
[no-]generics and [no-]relax directives and treat them as
[no-]transform.
(xtensa_begin_directive): Call md_flush_pending_output only for some
directives. Check for directives inside instruction bundles. Warn
about deprecated ".begin literal" usage. Warn and ignore [no-]density
directives. Handle new directives. Check generating_literals flag
for literal_prefix.
(xtensa_end_directive): Check for directives inside instruction
bundles. Warn and ignore [no-]density directives. Handle new
directives. Call xtensa_set_frag_assembly_state.
(xtensa_loc_directive_seen, xtensa_dwarf2_directive_loc,
xtensa_dwarf2_emit_insn): New.
(xtensa_literal_position): Call md_flush_pending_output. Do not check
use_literal_section flag.
(xtensa_literal_pseudo): Call md_flush_pending_output. Handle absolute
literals. Use xtensa_elf_cons to parse the expression.
(xtensa_literal_prefix): Do not check use_literal_section. Support
".lit4" sections for absolute literals. Change prefix convention to
replace ".text" (or ".t" in a linkonce section). No need to call
subseg_set.
(xtensa_frequency_pseudo, xtensa_elf_cons, xtensa_elf_suffix): New.
(expression_end): Handle closing braces and colons.
(PLT_SUFFIX, plt_suffix): Delete.
(expression_maybe_register): Use new xtensa-isa.h functions. Use
xtensa_elf_suffix instead of checking for plt suffix, and handle O_lo16
and O_hi16 expressions as well.
(tokenize_arguments): Handle closing braces and colons.
(parse_arguments): Use new xtensa-isa.h functions. Handle "invisible"
operands and paired register syntax.
(get_invisible_operands): New.
(xg_translate_sysreg_op): Handle new Xtensa LX RSR/WSR/XSR syntax. Use
new xtensa-isa.h functions.
(xtensa_translate_old_userreg_ops, xtensa_translate_zero_immed): New.
(xg_translate_idioms): Check if inside bundle. Use use_transform.
Handle new Xtensa LX RSR/WSR/XSR syntax. Remove code to widen density
instructions. Use xtensa_translate_zero_immed.
(operand_is_immed, operand_is_pcrel_label): Delete.
(get_relaxable_immed): Use new xtensa-isa.h functions.
(get_opcode_from_buf): Add slot parameter. Use new xtensa-isa.h
functions.
(xtensa_print_insn_table, print_vliw_insn): New.
(is_direct_call_opcode): Use new xtensa-isa.h functions.
(is_call_opcode, is_loop_opcode, is_conditional_branch_opcode,
is_branch_or_jump_opcode): Delete.
(is_movi_opcode, decode_reloc, encode_reloc, encode_alt_reloc): New.
(opnum_to_reloc, reloc_to_opnum): Delete.
(xtensa_insnbuf_set_operand, xtensa_insnbuf_get_operand): Use new
xtensa-isa.h functions. Operate on one slot of an instruction.
(xtensa_insnbuf_set_immediate_field, is_negatable_branch,
xg_get_insn_size): Delete.
(xg_get_build_instr_size): Use xg_get_single_size.
(xg_is_narrow_insn, xg_is_single_relaxable_insn): Update calls to
xg_build_widen_table. Use xg_get_single_size.
(xg_get_max_narrow_insn_size): Delete.
(xg_get_max_insn_widen_size, xg_get_max_insn_widen_literal_size,
xg_is_relaxable_insn): Update calls to xg_build_widen_table. Use
xg_get_single_size.
(xg_build_to_insn): Record the loc field. Handle OP_OPERAND_HI16U and
OP_OPERAND_LOW16U. Check xg_valid_literal_expression.
(xg_expand_to_stack, xg_expand_narrow): Update calls to
xg_build_widen_table. Use xg_get_single_size.
(xg_immeds_fit): Use new xtensa-isa.h functions. Update call to
xg_check_operand.
(xg_symbolic_immeds_fit): Likewise. Also handle O_lo16 and O_hi16, and
treat weak symbols conservatively.
(xg_check_operand): Use new xtensa-isa.h functions.
(is_dnrange): Delete.
(xg_assembly_relax): Inline previous calls to tinsn_copy.
(xg_finish_frag): Specify separate relax states for the frag and slot0.
(is_branch_jmp_to_next, xg_add_branch_and_loop_targets): Use new
xtensa-isa.h functions.
(xg_instruction_matches_option_term, xg_instruction_matches_or_options,
xg_instruction_matches_options): New.
(xg_instruction_matches_rule): Handle O_register expressions. Call
xg_instruction_matches_options.
(transition_rule_cmp): New.
(xg_instruction_match): Update call to xg_build_simplify_table.
(xg_build_token_insn): Record loc fields.
(xg_simplify_insn): Check is_specific_opcode field and
density_supported flag.
(xg_expand_assembly_insn): Skip checking code_density_available. Use
new xtensa-isa.h functions. Call use_transform instead of can_relax.
(xg_assemble_literal): Add error handling for O_big. Call
record_alignment. Handle O_pltrel.
(xg_valid_literal_expression): New.
(xg_assemble_literal_space): Add slot parameter. Remove call to
set_expr_symbol_offset. Add call to record_alignment. Update call to
xg_finish_frag.
(xg_emit_insn): Delete.
(xg_emit_insn_to_buf): Add format parameter. Update calls to
xg_add_opcode_fix and xtensa_insnbuf_to_chars.
(xg_add_opcode_fix): Change opcode parameter to tinsn and add format
and slot parameters. Handle new "alternate" relocations for absolute
literals and CONST16 instructions. Check for bad uses of O_lo16 and
O_hi16. Use new xtensa-isa.h functions.
(xg_assemble_tokens): Delete.
(is_register_writer): Use new xtensa-isa.h functions.
(is_bad_loopend_opcode): Check for xtensa_rsr_lcount_opcode instead of
old-style RSR from LCOUNT.
(next_frag_opcode): Delete.
(next_frag_opcode_is_loop, next_frag_format_size, frag_format_size,
update_next_frag_state): New.
(update_next_frag_nop_state): Delete.
(next_frag_pre_opcode_bytes): Use next_frag_opcode_is_loop.
(xtensa_mark_literal_pool_location): Check use_literal_section flag and
the state of the absolute-literals directive. Add calls to
record_alignment and xtensa_set_frag_assembly_state. Call
xtensa_switch_to_non_abs_literal_fragment instead of
xtensa_switch_to_literal_fragment.
(build_nop): New.
(assemble_nop): Use build_nop. Update call to xtensa_insnbuf_to_chars.
(get_expanded_loop_offset): Change check for undefined opcode to an
assertion.
(xtensa_set_frag_assembly_state, relaxable_section,
xtensa_find_unmarked_state_frags, xtensa_find_unaligned_branch_targets,
xtensa_find_unaligned_loops, xg_apply_tentative_value): New.
(md_begin): Update call to xtensa_isa_init. Initialize linkrelax to 1.
Set lit4_seg_name. Call xg_init_vinsn. Initialize new global opcodes.
Call init_op_placement_info_table and xtensa_set_frag_assembly_state.
(xtensa_init_fix_data): New.
(xtensa_frob_label): Reset label symbol to the current frag. Check
do_align_targets and generating_literals flag. Propagate frequency
info to new alignment frag. Call xtensa_set_frag_assembly_state.
(xtensa_unrecognized_line): New.
(xtensa_flush_pending_output): Check if inside a bundle. Add a call
to xtensa_set_frag_assembly_state.
(error_reset_cur_vinsn): New.
(md_assemble): Remove check for literal frag. Remove call to
istack_init. Call use_transform instead of use_generics. Parse
explicit instruction format specifiers. Move code for
a0_b_retw_interlock workaround to xg_assemble_vliw_tokens. Call
error_reset_cur_vinsn on errors. Add call to get_invisible_operands.
Add dwarf2_where call. Remote automatic alignment for ENTRY
instructions. Move call to xtensa_clear_insn_labels to the end.
Rearrange to handle bundles.
(xtensa_cons_fix_new): Delete.
(xtensa_handle_align): New.
(xtensa_frag_init): Call xtensa_set_frag_assembly_state. Remove
assignment to is_no_density field.
(md_pcrel_from): Use new xtensa-isa.h functions. Use decode_reloc
instead of reloc_to_opnum. Handle "alternate" relocations.
(xtensa_force_relocation, xtensa_check_inside_bundle,
xtensa_elf_section_change_hook): New.
(xtensa_symbol_new_hook): Delete.
(xtensa_fix_adjustable): Check for difference of symbols with an
offset. Check for external and weak symbols.
(md_apply_fix3): Remove cases for XTENSA_OP{0,1,2} relocs.
(md_estimate_size_before_relax): Return expansion for the first slot.
(tc_gen_reloc): Handle difference of symbols by producing
XTENSA_DIFF{8,16,32} relocs and by writing the value of the difference
into the output. Handle new XTENSA_SLOT*_OP relocs by storing the
tentative values into the output when linkrelax is set.
(XTENSA_PROP_SEC_NAME): Define.
(xtensa_post_relax_hook): Call xtensa_find_unmarked_state_frags.
Create literal tables only if using literal sections. Create new
property tables instead of old instruction tables. Check for unaligned
branch targets and loops.
(finish_vinsn, find_vinsn_conflicts, check_t1_t2_reads_and_writes,
new_resource_table, clear_resource_table, resize_resource_table,
resources_available, reserve_resources, release_resources,
opcode_funcUnit_use_unit, opcode_funcUnit_use_stage,
resources_conflict, xg_find_narrowest_format, relaxation_requirements,
bundle_single_op, emit_single_op, xg_assemble_vliw_tokens): New.
(xtensa_end): Call xtensa_flush_pending_output. Set past_xtensa_end
flag. Update checks for workaround options. Call
xtensa_mark_narrow_branches and xtensa_mark_zcl_first_insns.
(xtensa_cleanup_align_frags): Add special case for branch targets.
Check for and mark unreachable frags.
(xtensa_fix_target_frags): Remove use of align_only_targets flag.
Use RELAX_LOOP_END_BYTES in special case for negatable branch at the
end of a zero-overhead loop body.
(frag_can_negate_branch): Handle instructions with multiple slots.
Use new xtensa-isa.h functions
(xtensa_mark_narrow_branches, is_narrow_branch_guaranteed_in_range,
xtensa_mark_zcl_first_insns): New.
(xtensa_fix_a0_b_retw_frags, xtensa_fix_b_j_loop_end_frags): Error if
transformations are disabled.
(next_instrs_are_b_retw): Use new xtensa-isa.h functions. Handle
multislot instructions.
(xtensa_fix_close_loop_end_frags, xtensa_fix_short_loop_frags):
Likewise. Also error if transformations are disabled.
(unrelaxed_frag_max_size): New.
(unrelaxed_frag_min_insn_count, unrelax_frag_has_b_j): Use new
xtensa-isa.h functions.
(xtensa_sanity_check, is_empty_loop, is_local_forward_loop): Use
xtensa_opcode_is_loop instead of is_loop_opcode.
(get_text_align_power): Replace as_fatal with assertion.
(get_text_align_fill_size): Iterate instead of using modulus when
use_nops is false.
(get_noop_aligned_address): Assert that this is for a machine-dependent
RELAX_ALIGN_NEXT_OPCODE frag. Use next_frag_opcode_is_loop,
xg_get_single_size, and frag_format_size.
(get_widen_aligned_address): Rename to ...
(get_aligned_diff): ... this function. Add max_diff parameter.
Remove handling of rs_align/rs_align_code frags. Use
next_frag_format_size, get_text_align_power, get_text_align_fill_size,
next_frag_opcode_is_loop, and xg_get_single_size. Compute max_diff
and pass it back to caller.
(xtensa_relax_frag): Use relax_frag_loop_align. Add code for new
RELAX_SLOTS, RELAX_MAYBE_UNREACHABLE, RELAX_MAYBE_DESIRE_ALIGN,
RELAX_FILL_NOP, and RELAX_UNREACHABLE frag types. Check relax_seen.
(relax_frag_text_align): Rename to ...
(relax_frag_loop_align): ... this function. Assume loops can only be
in the first slot of an instruction.
(relax_frag_add_nop): Use assemble_nop instead of constructing an OR
instruction. Remove call to frag_wane.
(relax_frag_narrow): Rename to ...
(relax_frag_for_align): ... this function. Extend to handle
RELAX_FILL_NOP and RELAX_UNREACHABLE, as well as RELAX_SLOTS with
RELAX_NARROW for the first slot.
(find_address_of_next_align_frag, bytes_to_stretch): New.
(future_alignment_required): Use find_address_of_next_align_frag and
bytes_to_stretch. Look ahead to subsequent frags to make smarter
alignment decisions.
(relax_frag_immed): Add format, slot, and estimate_only parameters.
Check if transformations are enabled for b_j_loop_end workaround.
Use new xtensa-isa.h functions and handle multislot instructions.
Update call to xg_assembly_relax.
(md_convert_frag): Handle new RELAX_SLOTS, RELAX_UNREACHABLE,
RELAX_MAYBE_UNREACHABLE, RELAX_MAYBE_DESIRE_ALIGN, and RELAX_FILL_NOP
frag types.
(convert_frag_narrow): Add segP, format and slot parameters. Call
convert_frag_immed for branch instructions. Adjust calls to
tinsn_from_chars, tinsn_immed_from_frag, and xg_emit_insn_to_buf. Use
xg_get_single_size and xg_get_single_format.
(convert_frag_fill_nop): New.
(convert_frag_immed): Add format and slot parameters. Handle multislot
instructions and use new xtensa-isa.h functions. Update calls to
tinsn_immed_from_frag and xg_assembly_relax. Check if transformations
enabled for b_j_loop_end workaround. Use build_nop instead of
assemble_nop. Check is_specific_opcode flag. Check for unreachable
frags. Use xg_get_single_size. Handle O_pltrel.
(fix_new_exp_in_seg): Remove check for old plt flag.
(convert_frag_immed_finish_loop): Update calls to tinsn_from_chars and
xtensa_insnbuf_to_chars. Call tinsn_immed_from_frag. Change check
for loop opcode to an assertion. Mark all frags up to the end of the
loop as not transformable.
(get_last_insn_flags, set_last_insn_flags): Use get_subseg_info.
(get_subseg_info): New.
(xtensa_move_literals): Call xtensa_set_frag_assembly_state. Add null
check for dest_seg.
(xtensa_switch_to_literal_fragment): Rewrite to handle absolute
literals and use xtensa_switch_to_non_abs_literal_fragment otherwise.
(xtensa_switch_to_non_abs_literal_fragment): New.
(cache_literal_section): Add is_code parameter and pass it through to
retrieve_literal_seg.
(retrieve_literal_seg): Add is_code parameter and use it to set the
flags on the literal section. Handle case where head parameter is 0.
(get_frag_is_no_transform, set_frag_is_specific_opcode,
set_frag_is_no_transform): New.
(xtensa_create_property_segments): Add end_property_function parameter
and pass it through to add_xt_block_frags. Call bfd_get_section_flags
and skip SEC_DEBUGGING and !SEC_ALLOC sections.
(xtensa_create_xproperty_segments, section_has_xproperty): New.
(add_xt_block_frags): Add end_property_function parameter and call it
if it is non-zero. Call xtensa_frag_flags_init.
(xtensa_frag_flags_is_empty, xtensa_frag_flags_init,
get_frag_property_flags, frag_flags_to_number,
xtensa_frag_flags_combinable, xt_block_aligned_size,
xtensa_xt_block_combine, add_xt_prop_frags,
init_op_placement_info_table, opcode_fits_format_slot,
xg_get_single_size, xg_get_single_format): New.
(istack_push): Inline call to tinsn_copy.
(tinsn_copy): Delete.
(tinsn_has_invalid_symbolic_operands): Handle O_hi16 and O_lo16 and
CONST16 opcodes. Handle O_big, O_illegal, and O_absent.
(tinsn_has_complex_operands): Handle O_hi16 and O_lo16.
(tinsn_to_insnbuf): Use xg_get_single_format and new xtensa-isa.h
functions. Handle invisible operands.
(tinsn_to_slotbuf): New.
(tinsn_check_arguments): Use new xtensa-isa.h functions.
(tinsn_from_chars): Add slot parameter. Rewrite using xg_init_vinsn,
vinsn_from_chars, and xg_free_vinsn.
(tinsn_from_insnbuf): New.
(tinsn_immed_from_frag): Add slot parameter and handle multislot
instructions. Handle symbol differences.
(get_num_stack_text_bytes): Use xg_get_single_size.
(xg_init_vinsn, xg_clear_vinsn, vinsn_has_specific_opcodes,
xg_free_vinsn, vinsn_to_insnbuf, vinsn_from_chars, expr_is_register,
get_expr_register, set_expr_symbol_offset_diff): New.
* config/tc-xtensa.h (MAX_SLOTS): Define.
(xtensa_relax_statesE): Move from tc-xtensa.c. Add
RELAX_CHECK_ALIGN_NEXT_OPCODE, RELAX_MAYBE_DESIRE_ALIGN, RELAX_SLOTS,
RELAX_FILL_NOP, RELAX_UNREACHABLE, RELAX_MAYBE_UNREACHABLE, and
RELAX_NONE types.
(RELAX_IMMED_MAXSTEPS): Move from tc-xtensa.c.
(xtensa_frag_type struct): Add is_assembly_state_set,
use_absolute_literals, relax_seen, is_unreachable, is_specific_opcode,
is_align, is_text_align, alignment, and is_first_loop_insn fields.
Replace is_generics and is_relax fields by is_no_transform field.
Delete is_text and is_longcalls fields. Change text_expansion and
literal_expansion to arrays of MAX_SLOTS entries. Add arrays of
per-slot information: literal_frags, slot_subtypes, slot_symbols,
slot_sub_symbols, and slot_offsets. Add fr_prev field.
(xtensa_fix_data struct): New.
(xtensa_symfield_type struct): Delete plt field.
(xtensa_block_info struct): Move definition to tc-xtensa.h. Add
forward declaration here.
(xt_section_type enum): Delete xt_insn_sec. Add xt_prop_sec.
(XTENSA_SECTION_RENAME): Undefine.
(TC_FIX_TYPE, TC_INIT_FIX_DATA, TC_FORCE_RELOCATION, NO_PSEUDO_DOT,
tc_unrecognized_line, md_do_align, md_elf_section_change_hook,
HANDLE_ALIGN, TC_LINKRELAX_FIXUP, SUB_SEGMENT_ALIGN): Define.
(TC_CONS_FIX_NEW, tc_symbol_new_hook): Delete.
(unit_num_copies_func, opcode_num_units_func,
opcode_funcUnit_use_unit_func, opcode_funcUnit_use_stage_func): New.
(resource_table struct): New.
* config/xtensa-istack.h (MAX_INSN_ARGS): Increase from 6 to 10.
(TInsn struct): Add keep_wide, loc, fixup, record_fix, subtype,
literal_space, symbol, sub_symbol, offset, and literal_frag fields.
(tinsn_copy): Delete prototype.
(vliw_insn struct): New.
* config/xtensa-relax.c (insn_pattern_struct): Add options field.
(widen_spec_list): Add option conditions for density and boolean
instructions. Add expansions using CONST16 and conditions for using
CONST16 vs. L32R. Use new Xtensa LX RSR/WSR syntax. Add entries for
predicted branches.
(simplify_spec_list): Add option conditions for density instructions.
Add entry for NOP instruction.
(append_transition): Add cmp function pointer parameter and use it to
insert the new entry in order.
(operand_function_LOW16U, operand_function_HI16U): New.
(xg_has_userdef_op_fn, xg_apply_userdef_op_fn): Handle
OP_OPERAND_LOW16U and OP_OPERAND_HI16U.
(enter_opname, split_string): Use xstrdup instead of strdup.
(init_insn_pattern): Initialize new options field.
(clear_req_or_option_list, clear_req_option_list,
clone_req_or_option_list, clone_req_option_list, parse_option_cond):
New.
(parse_insn_pattern): Parse option conditions.
(transition_applies): New.
(build_transition): Use new xtensa-isa.h functions. Fix incorrectly
swapped last arguments in calls to append_constant_value_condition.
Call clone_req_option_list. Add warning about invalid opcode.
Handle LOW16U and HI16U function names.
(build_transition_table): Add cmp parameter and use it in calls to
append_transition. Use new xtensa-isa.h functions. Check
transition_applies before adding entries.
(xg_build_widen_table, xg_build_simplify_table): Add cmp parameter and
pass it through to build_transition_table.
* config/xtensa-relax.h (ReqOrOptionList, ReqOrOption, ReqOptionList,
ReqOption, transition_cmp_fn): New types.
(OpType enum): Add OP_OPERAND_LOW16U and OP_OPERAND_HI16U.
(transition_rule struct): Add options field.
* doc/as.texinfo (Overview): Update Xtensa options.
* doc/c-xtensa.texi (Xtensa Options): Delete --[no-]density,
--[no-]relax, and --[no-]generics options. Update descriptions of
--text-section-literals and --[no-]longcalls. Add
--[no-]absolute-literals and --[no-]transform.
(Xtensa Syntax): Add description of syntax for FLIX instructions.
Remove use of "generic" and "specific" terminology for opcodes.
(Xtensa Registers): Generalize the syntax description to include
user-defined register files.
(Xtensa Automatic Alignment): Update.
(Xtensa Branch Relaxation): Mention limitation of unconditional jumps.
(Xtensa Call Relaxation): Linker can now remove most of the overhead.
(Xtensa Directives): Remove confusing rules about precedence.
(Density Directive, Relax Directive): Delete.
(Schedule Directive): New.
(Generics Directive): Rename to ...
(Transform Directive): ... this node.
(Literal Directive): Update for absolute literals. Missing
literal_position directive is now an error.
(Literal Position Directive): Update for absolute literals.
(Freeregs Directive): Delete.
(Absolute Literals Directive): New.
(Frame Directive): Minor editing.
* Makefile.am (DEPTC_xtensa_elf, DEPOBJ_xtensa_elf, DEP_xtensa_elf):
Update dependencies.
* Makefile.in: Regenerate.
gas/testsuite ChangeLog
* gas/xtensa/all.exp: Adjust expected error message for j_too_far.
Change entry_align test to expect an error.
* gas/xtensa/entry_misalign2.s: Use no-transform instead of
no-generics directives.
include ChangeLog
* xtensa-config.h (XSHAL_USE_ABSOLUTE_LITERALS,
XCHAL_HAVE_PREDICTED_BRANCHES, XCHAL_INST_FETCH_WIDTH): New.
(XCHAL_EXTRA_SA_SIZE, XCHAL_EXTRA_SA_ALIGN): Delete.
* xtensa-isa-internal.h (ISA_INTERFACE_VERSION): Delete.
(config_sturct struct): Delete.
(XTENSA_OPERAND_IS_REGISTER, XTENSA_OPERAND_IS_PCRELATIVE,
XTENSA_OPERAND_IS_INVISIBLE, XTENSA_OPERAND_IS_UNKNOWN,
XTENSA_OPCODE_IS_BRANCH, XTENSA_OPCODE_IS_JUMP,
XTENSA_OPCODE_IS_LOOP, XTENSA_OPCODE_IS_CALL,
XTENSA_STATE_IS_EXPORTED, XTENSA_INTERFACE_HAS_SIDE_EFFECT): Define.
(xtensa_format_encode_fn, xtensa_get_slot_fn, xtensa_set_slot_fn): New.
(xtensa_insn_decode_fn): Rename to ...
(xtensa_opcode_decode_fn): ... this.
(xtensa_immed_decode_fn, xtensa_immed_encode_fn, xtensa_do_reloc_fn,
xtensa_undo_reloc_fn): Update.
(xtensa_encoding_template_fn): Delete.
(xtensa_opcode_encode_fn, xtensa_format_decode_fn,
xtensa_length_decode_fn): New.
(xtensa_format_internal, xtensa_slot_internal): New types.
(xtensa_operand_internal): Delete operand_kind, inout, isPCRelative,
get_field, and set_field fields. Add name, field_id, regfile,
num_regs, and flags fields.
(xtensa_arg_internal): New type.
(xtensa_iclass_internal): Change operands field to array of
xtensa_arg_internal. Add num_stateOperands, stateOperands,
num_interfaceOperands, and interfaceOperands fields.
(xtensa_opcode_internal): Delete length, template, and iclass fields.
Add iclass_id, flags, encode_fns, num_funcUnit_uses, and funcUnit_uses.
(opname_lookup_entry): Delete.
(xtensa_regfile_internal, xtensa_interface_internal,
xtensa_funcUnit_internal, xtensa_state_internal,
xtensa_sysreg_internal, xtensa_lookup_entry): New.
(xtensa_isa_internal): Replace opcode_table field with opcodes field.
Change type of opname_lookup_table. Delete num_modules,
module_opcode_base, module_decode_fn, config, and has_density fields.
Add num_formats, formats, format_decode_fn, length_decode_fn,
num_slots, slots, num_fields, num_operands, operands, num_iclasses,
iclasses, num_regfiles, regfiles, num_states, states,
state_lookup_table, num_sysregs, sysregs, sysreg_lookup_table,
max_sysreg_num, sysreg_table, num_interfaces, interfaces,
interface_lookup_table, num_funcUnits, funcUnits and
funcUnit_lookup_table fields.
(xtensa_isa_module, xtensa_isa_modules): Delete.
(xtensa_isa_name_compare): New prototype.
(xtisa_errno, xtisa_error_msg): New.
* xtensa-isa.h (XTENSA_ISA_VERSION): Define.
(xtensa_isa): Change type.
(xtensa_operand): Delete.
(xtensa_format, xtensa_regfile, xtensa_state, xtensa_sysreg,
xtensa_interface, xtensa_funcUnit, xtensa_isa_status,
xtensa_funcUnit_use): New types.
(libisa_module_specifier): Delete.
(xtensa_isa_errno, xtensa_isa_error_msg): New prototypes.
(xtensa_insnbuf_free, xtensa_insnbuf_to_chars,
xtensa_insnbuf_from_chars): Update prototypes.
(xtensa_load_isa, xtensa_extend_isa, xtensa_default_isa,
xtensa_insn_maxlength, xtensa_num_opcodes, xtensa_decode_insn,
xtensa_encode_insn, xtensa_insn_length,
xtensa_insn_length_from_first_byte, xtensa_num_operands,
xtensa_operand_kind, xtensa_encode_result,
xtensa_operand_isPCRelative): Delete.
(xtensa_isa_init, xtensa_operand_inout, xtensa_operand_get_field,
xtensa_operand_set_field, xtensa_operand_encode,
xtensa_operand_decode, xtensa_operand_do_reloc,
xtensa_operand_undo_reloc): Update prototypes.
(xtensa_isa_maxlength, xtensa_isa_length_from_chars,
xtensa_isa_num_pipe_stages, xtensa_isa_num_formats,
xtensa_isa_num_opcodes, xtensa_isa_num_regfiles, xtensa_isa_num_states,
xtensa_isa_num_sysregs, xtensa_isa_num_interfaces,
xtensa_isa_num_funcUnits, xtensa_format_name, xtensa_format_lookup,
xtensa_format_decode, xtensa_format_encode, xtensa_format_length,
xtensa_format_num_slots, xtensa_format_slot_nop_opcode,
xtensa_format_get_slot, xtensa_format_set_slot, xtensa_opcode_decode,
xtensa_opcode_encode, xtensa_opcode_is_branch, xtensa_opcode_is_jump,
xtensa_opcode_is_loop, xtensa_opcode_is_call,
xtensa_opcode_num_operands, xtensa_opcode_num_stateOperands,
xtensa_opcode_num_interfaceOperands, xtensa_opcode_num_funcUnit_uses,
xtensa_opcode_funcUnit_use, xtensa_operand_name,
xtensa_operand_is_visible, xtensa_operand_is_register,
xtensa_operand_regfile, xtensa_operand_num_regs,
xtensa_operand_is_known_reg, xtensa_operand_is_PCrelative,
xtensa_stateOperand_state, xtensa_stateOperand_inout,
xtensa_interfaceOperand_interface, xtensa_regfile_lookup,
xtensa_regfile_lookup_shortname, xtensa_regfile_name,
xtensa_regfile_shortname, xtensa_regfile_view_parent,
xtensa_regfile_num_bits, xtensa_regfile_num_entries,
xtensa_state_lookup, xtensa_state_name, xtensa_state_num_bits,
xtensa_state_is_exported, xtensa_sysreg_lookup,
xtensa_sysreg_lookup_name, xtensa_sysreg_name, xtensa_sysreg_number,
xtensa_sysreg_is_user, xtensa_interface_lookup, xtensa_interface_name,
xtensa_interface_num_bits, xtensa_interface_inout,
xtensa_interface_has_side_effect, xtensa_funcUnit_lookup,
xtensa_funcUnit_name, xtensa_funcUnit_num_copies): New prototypes.
* elf/xtensa.h (R_XTENSA_DIFF8, R_XTENSA_DIFF16, R_XTENSA_DIFF32,
R_XTENSA_SLOT*_OP, R_XTENSA_SLOT*_ALT): New relocations.
(XTENSA_PROP_SEC_NAME): Define.
(property_table_entry): Add flags field.
(XTENSA_PROP_*, GET_XTENSA_PROP_*, SET_XTENSA_PROP_*): Define.
ld ChangeLog
* ld.texinfo (Xtensa): Describe new linker relaxation to optimize
assembler-generated longcall sequences. Describe new --size-opt
option.
* emulparams/elf32xtensa.sh (OTHER_SECTIONS): Add .xt.prop section.
* emultempl/xtensaelf.em (remove_section,
replace_insn_sec_with_prop_sec, replace_instruction_table_sections,
elf_xtensa_after_open): New.
(OPTION_OPT_SIZEOPT, OPTION_LITERAL_MOVEMENT,
OPTION_NO_LITERAL_MOVEMENT): Define.
(elf32xtensa_size_opt, elf32xtensa_no_literal_movement): New globals.
(PARSE_AND_LIST_LONGOPTS): Add size-opt and [no-]literal-movement.
(PARSE_AND_LIST_OPTIONS): Add --size-opt.
(PARSE_AND_LIST_ARGS_CASES): Handle OPTION_OPT_SIZEOPT,
OPTION_LITERAL_MOVEMENT, and OPTION_NO_LITERAL_MOVEMENT.
(LDEMUL_AFTER_OPEN): Set to elf_xtensa_after_open.
* scripttempl/elfxtensa.sc: Update with changes from elf.sc.
* Makefile.am (eelf32xtensa.c): Update dependencies.
* Makefile.in: Regenerate.
ld/testsuite ChangeLog
* ld-xtensa/lcall1.s: Use .literal directive.
* ld-xtensa/lcall2.s: Align function entry.
* ld-xtensa/coalesce2.s: Likewise.
opcodes ChangeLog
* xtensa-dis.c (state_names): Delete.
(fetch_data): Use xtensa_isa_maxlength.
(print_xtensa_operand): Replace operand parameter with opcode/operand
pair. Remove print_sr_name parameter. Use new xtensa-isa.h functions.
(print_insn_xtensa): Use new xtensa-isa.h functions. Handle multislot
instruction bundles. Use xmalloc instead of malloc.
emulparams/i386pe_posix.sh, emulparams/mcorepe.sh, emulparams/mipspe.sh,
emulparams/ppcpe.sh, scripttempl/pe.sc: Define TARGET_PAGE_SIZE.
* scripttempl/pe.sc: Make the virtual address and file offset synced if the
alignment is lower than the target page size.
* elf.c (_bfd_elf_make_dynamic_segment): New function, split out
from ...
(map_sections_to_segments): ... here. Use it. Assign a file
position to the .dynamic section if it is not loadable, but part
of the PT_DYNAMIC segment.
* elf32-arm.h (elf32_arm_finish_dynamic_sections): Use file
offsets, not VMAs, for the BPABI. Do not fill in the header in
the .got.plt section for the BPABI.
* elfarm-nabi.c (elf32_arm_symbian_modify_segment_map): Add a
PT_DYNAMIC segment.
(elf_backend_want_got_plt): Define to zero for Symbian OS.
* emulparams/armsymbian.sh: Use armbpabi script.
* scripttempl/armbpabi.sc: New script.
* configure.in (bfd_elf32_bigarm_symbian_vec): Add it.
(bfd_elf32_littlearm_symbian_vec): Likewise.
* configure: Regenerated.
* elf-bfd.h (elf_backend_data): Add dynamic_sec_flags.
* elf32-arm.h (PLT_HEADER_SIZE): Do not define.
(PLT_ENTRY_SIZE): Likewise.
(bfd_vma_elf32_arm_symbian_plt_entry): New
variable.
(elf32_arm_link_hash_table): Add plt_header_size, plt_entry_size,
and symbian_p.
(create_got_section): Don't create sections when generating BPABI
objects.
(elf32_arm_create_dynamic_sections): Tidy.
(elf32_arm_link_hash_table_create): Set plt_header_size,
plt_entry_size, and symbian_p.
(elf32_arm_check_relocs): Do not mark .rel.dyn as loadable when
generating BPABI objects.
(allocate_dynrelocs): Use htab->plt_header_size, not
PLT_HEADER_SIZE. Do not add to .got.plt when
generating BPABI objects.
(elf32_arm_finish_dynamic_symbol): Generate Symbian OS PLTs.
* elfarm-nabi.c: Add SymbianOS target vectors.
* elflink.c (_bfd_elf_create_got_section): Use dynamic_sec_flags.
(_bfd_elf_link_create_dynamic_sections): Likewise.
* elfxx-target.h (ELF_DYNAMIC_SEC_FLAGS): New macro.
(elfNN_bed): Use it.
* targets.c (bfd_elf32_bigarm_symbian_vec): New variable.
(bfd_elf32_littlearm_symbian_vec): Likewise.
(_bfd_target_vector): Add them.
* Makefile.am (TARG_ENV_HFILES): Add te-symbian.h.
* Makefile.in: Regenerated.
* configure.in: Set em for arm*-*-symbianelf*.
* configure: Regenerated.
* config/tc-arm.c (elf32_arm_target_format): Use Symbian target
vectors when appropriate.
* config/te-symbian.h: New file.
* Makefile.am (ALL_EMULATIONS): Add earmsymbian.o.
(earmsymbian.c): New target.
* configure.tgt: Use armsymbian emulation for arm*-*-symbianelf*.
* Makefile.in: Regenerated.
* aclocal.m4: Likewise.
* configure: Likewise.
* emulparams/armsymbian.sh: New file.
* config.bfd (hppa*-*-netbsd*): Set targ_defvec to
bfd_elf32_hppa_nbsd_vec. Add bfd_elf32_hppa_linux_vec
to targ_selvecs.
* configure.in (bfd_elf32_hppa_nbsd_vec): Add case.
* configure: Regenerate.
* elf32-hppa.c (elf32_hppa_object_p): Add "elf32-hppa-netbsd"
case that accepts OSABI=NetBSD and OSABI=SysV.
(elf32_hppa_set_gp): For "elf32-hppa-netbsd", set the GP to
the base of .got or .data (if .got does not exist).
(elf32_hppa_post_process_headers): For elf32-hppa-netbsd,
set OSABI=NetBSD.
(TARGET_BIG_SYM): Add bfd_elf32_hppa_nbsd_vec case.
(TARGET_BIG_NAME): Add "elf32-hppa-netbsd" case.
* targets.c (bfd_elf32_hppa_nbsd_vec): Add extern declaration.
(_bfd_target_vector): Add bfd_elf32_hppa_nbsd_vec.
gas:
* config/tc-hppa.h (TARGET_FORMAT): Set to "elf32-hppa-netbsd"
for TE_NetBSD.
ld:
* emulparams/hppanbsd.sh (OUTPUT_FORMAT): Set to "elf32-hppa-netbsd".
bfd/ChangeLog
* elfxx-ia64.c (get_fptr): For fptr_rel, use dynobj not abfd.
(elfNN_ia64_size_dynamic_sections): When stripping sections, check
for ia64_info->rel_fptr_sec.
ld/ChangeLog
* emulparams/elf64_ia64.sh (OTHER_PLT_RELOC_SECTIONS): Include
.rela.opd if -pie.
genscripts_extra.sh.
Rearrange all msp430 depends using this script.
* Makefile.in: Regenerate.
* genscripts_extra.sh: New file: Similar to genscripts.sh, except that the
script to be run to generate the emulations can be passed
as an optional parameter instead of being computed from the
emulation name.
* emulparams/msp430all.sh: New file: Combine all msp430 subdevice definitions
into one file.
* emulparams/msp430x*.sh: Removed.
* elf32-xtensa.c (elf_xtensa_create_dynamic_sections): Create new
.got.loc section. Do not set SEC_ALLOC or SEC_LOAD flags for the
.xt.lit.plt section.
(elf_xtensa_size_dynamic_sections): Set size of the .got.loc section
and allocate memory for it.
(elf_xtensa_combine_prop_entries): Copy contents of .xt.lit output
section to the .got.loc section.
(elf_xtensa_finish_dynamic_sections): Fix up call to
elf_xtensa_combine_prop_entries and set DT_XTENSA_GOT_LOC_OFF to
the address of .got.loc.
(relax_property_section): Shrink .got.loc to match changes in any
literal table section.
(xtensa_is_property_section): Change to match
xtensa_get_property_section_name.
(xtensa_is_littable_section): New.
ld ChangeLog:
* emulparams/elf32xtensa.sh (OTHER_READONLY_SECTIONS): Replace .xt.lit
with new .got.loc section.
(OTHER_READWRITE_SECTIONS): Do not combine linkonce sections for
non-relocating links.
(OTHER_SECTIONS): Add .xt.lit here. Change it to keep linkonce
sections separate for non-relocating links; likewise for .xt.insn.
(GOT): Define.
* emultempl/ppc64elf.em (stub_added): New static var.
(ppc_create_output_section_statements): Call ppc64_elf_init_stub_bfd.
(ppc_add_stub_section): Set stub_added.
(gld${EMULATION_NAME}_finish): Look for .got rather than .toc. Adjust
ppc64_elf_size_stubs call and test for stubs.
* scripttempl/elf.sc (GOT): Define and use.
* elfxx-ia64.c (struct elfNN_ia64_link_hash_table): Add rel_fptr_sec.
(elfNN_ia64_dynamic_symbol_p): Change info->shared into
!info->executable.
(get_fptr): For -pie create .opd as writable section and create
.rela.opd as well.
(elfNN_ia64_check_relocs): Change info->shared into
!info->executable.
(allocate_fptr): Likewise.
(allocate_dynrel_entries): Account for a relative reloc for -pie
@fptr(). Don't account for a relative reloc if -pie want_ltoff_fptr
for undefweak symbol. Account for an IPLT reloc in .rela.opd
section if -pie.
(set_got_entry): Don't create a relative reloc if -pie
want_ltoff_fptr for undefweak symbol.
(set_fptr_entry): Emit an IPLT reloc in .rela.opd for -pie.
(elfNN_ia64_relocate_section): Emit a relative reloc for -pie
@fptr().
* elfxx-ia64.c (elfNN_ia64_relocate_section): Issue undefined_symbol
even if -pie.
* elf32-i386.c (elf_i386_relocate_section): Likewise.
* elf64-x86-64.c (elf64_x86_64_relocate_section): Likewise.
* elf64-sparc.c (sparc64_elf_relocate_section): Likewise.
* elf64-s390.c (elf_s390_relocate_section): Likewise.
* elf64-ppc.c (ppc64_elf_relocate_section): Likewise.
* elf64-alpha.c (elf64_alpha_relocate_section): Likewise.
* elf32-sparc.c (elf32_sparc_relocate_section): Likewise.
* elf32-s390.c (elf_s390_relocate_section): Likewise.
* elf32-ppc.c (ppc_elf_relocate_section): Likewise.
ld/
* emulparams/elf64_ia64.sh (OTHER_READONLY_SECTIONS): Don't include
.opd if -pie.
(OTHER_READWRITE_SECTIONS): Include .opd if -pie.
* scripttempl/elf.sc: Use SHLIB_DATA_ADDR instead of DATA_ADDR
if -pie.
