* Makefile.in: Regenerated.
* ehopt.c: Include struc-symbol.h.
(check_eh_frame): For very small O_constant DW_CFA_advance_loc4
create correct DW_CFA_advance_loc. Handle O_subtract only
for code alignment factor 1, otherwise handle O_divide or
O_right_shift of O_subtract and O_constant.
(eh_frame_estimate_size_before_relax): Always divide by ca.
(eh_frame_convert_frag): Likewise.
* dw2gencfi.c (output_cfi_insn): Scale DW_CFA_advance_loc1,
DW_CFA_advance_loc2 and DW_CFA_advance_loc4 outputs.
(output_cie, output_fde): Use it.
(DWARF2_EH_FRAME_READ_ONLY): New.
(cfi_finish): Use it.
* config/tc-hppa.h (DWARF2_FDE_RELOC_SIZE): Set to 8 for 64-bit.
(DWARF2_CIE_DATA_ALIGNMENT): Change sign.
(DWARF2_EH_FRAME_READ_ONLY): New.
* config/tc-hppa.c (tc_gen_reloc): Generate pc-relative relocations
from the results of DIFF_EXPR_OK manipulation.
2008-02-13 Jan Beulich <jbeulich@novell.com>
* config/tc-i386.c (allow_pseudo_reg): New.
(parse_real_register): Check for NULL just once. Allow all
register table entries when allow_pseudo_reg is non-zero.
Don't allow any registers without type when allow_pseudo_reg
is zero.
(tc_x86_regname_to_dw2regnum): Replace with ...
(tc_x86_parse_to_dw2regnum): ... this.
(tc_x86_frame_initial_instructions): Adjust for above change.
* config/tc-i386.h (tc_regname_to_dw2regnum): Remove.
(tc_parse_to_dw2regnum): New.
(tc_x86_regname_to_dw2regnum): Replace with ...
(tc_x86_parse_to_dw2regnum): ... this.
* dw2gencfi.c (tc_parse_to_dw2regnum): New, broken out of ...
(cfi_parse_reg): ... this. Use tc_parse_to_dw2regnum. Adjust
error handling.
gas/testsuite/
2008-02-13 Jan Beulich <jbeulich@novell.com>
* gas/cfi/cfi-i386.s: Add code testing use of all registers.
Fix a few comments.
* gas/cfi/cfi-x86_64.s: Likewise.
* gas/cfi/cfi-i386.d, gas/cfi/cfi-x86_64.d: Adjust.
opcodes/
2008-02-13 Jan Beulich <jbeulich@novell.com>
* i386-gen.c (process_i386_registers): Process new fields.
* i386-opc.h (reg_entry): Shrink reg_flags and reg_num to
unsigned char. Add dw2_regnum and Dw2Inval.
* i386-reg.tbl: Provide initializers for dw2_regnum. Add pseudo
register names.
* i386-tbl.h: Re-generate.
personality and lsda.
(struct cie_entry): Add per_encoding, lsda_encoding and personality.
(alloc_fde_entry): Initialize per_encoding and lsda_encoding.
(cfi_pseudo_table): Handle .cfi_personality and .cfi_lsda.
(dot_cfi_personality, dot_cfi_lsda, encoding_size): New functions.
(output_cie): Output personality including its encoding and LSDA encoding.
(output_fde): Output LSDA.
(select_cie_for_fde): Don't share CIE if personality, its encoding or
LSDA encoding are different. Copy the 3 fields from fde_entry to
cie_entry.
* doc/as.texinfo (.cfi_personality, .cfi_lsda): Document.
* gas/cfi/cfi-common-6.d: New test.
* gas/cfi/cfi-common-6.s: New.
* gas/cfi/cfi.exp: Add cfi-common-6 test.
- allowing true forward references (which will always assume the referenced
symbols have at the point of use) through the new .eqv pseudo-op and the
new == operator
- disallowing changing .equiv-generated equates (so that the protection this
provides is both forward and backward)
- snapshotting equates when their value gets changed so that previous uses
don't get affected by the new value.
- allowing expressions in places where absolute expressions (or register
names) are needed which were not completely resolvable at the point of
their definition but which are fully resolvable at the point of use
In addition it fixes PR/288.
2005-09-28 Jan Beulich <jbeulich@novell.com>
* dw2gencfi.c (dot_cfi): Call ignore_rest_of_line when not fully
parsing the input.
(dot_cfi_startproc): Likewise.
(dot_cfi_endproc): Likewise. Also check no extra input was given.
(dot_cfi_escape): Likewise.
2004-12-15 Jan Beulich <jbeulich@novell.com>
* dw2gencfi.c (dot.cfi.startproc): Clear cur_cfa_offset so
'.cfi_startproc simple' doesn't inherit the old value.
2004-12-15 Jan Beulich <jbeulich@novell.com>
* dw2gencfi.c (output_cfi_insn): Adjust DW_CFA_def_cfa_sf generation
to emit a signed and factored offset. Adjust DW_CFA_def_cfa_offset_sf
generation to emit a factored offset.
(dot_cfi, output_cfi_insn): Handle DW_CFA_GNU_window_save.
(output_cie): Don't use DW_EH_PE_pcrel if neither DIFF_EXPR_OK
nor tc_cfi_emit_pcrel_expr are defined.
(output_fde): Use tc_cfi_emit_pcrel_expr if available and
DIFF_EXPR_OK is not defined.
* config/tc-sparc.h (TARGET_USE_CFIPOP): Define.
(tc_cfi_frame_initial_instructions, tc_regname_to_dw2regnum,
tc_cfi_emit_pcrel_expr): Define.
(sparc_cfi_frame_initial_instructions, sparc_regname_to_dw2regnum,
sparc_cfi_emit_pcrel_expr): New prototypes.
(sparc_cie_data_alignment): New decl.
(DWARF2_DEFAULT_RETURN_COLUMN, DWARF2_CIE_DATA_ALIGNMENT): Define.
* config/tc-sparc.c: Include dw2gencfi.h.
(sparc_cie_data_alignment): New variable.
(md_begin): Initialize it.
(sparc_cfi_frame_initial_instructions): New function.
(sparc_regname_to_dw2regnum): Likewise.
(sparc_cfi_emit_pcrel_expr): Likewise.
* doc/as.texinfo: Document .cfi_gnu_window_save.
* config/tc-sparc.c (s_common): Cast last argument to long and
change format string to shut up warning.
testsuite/
* gas/cfi/cfi-sparc-1.s: New test.
* gas/cfi/cfi-sparc-1.d: New test.
* gas/cfi/cfi-sparc64-1.s: New test.
* gas/cfi/cfi-sparc64-1.d: New test.
* gas/cfi/cfi.exp: Run them.
(output_cie): Don't pad.
(output_fde): Add align argument. Pad to align if not 0.
(cfi_finish): Set .eh_frame alignment to EH_FRAME_ALIGNMENT.
Pad just last FDE to EH_FRAME_ALIGNMENT.
* gas/cfi/cfi-i386.d: Regenerated.
* gas/cfi/cfi-common-1.d: Regenerated.
* gas/cfi/cfi-common-2.d: Regenerated.
* gas/cfi/cfi-common-3.d: Regenerated.
* gas/cfi/cfi-x86_64.d: Regenerated.
* gas/cfi/cfi-alpha-1.d: Regenerated.
* gas/cfi/cfi-alpha-2.d: Regenerated.
* gas/cfi/cfi-alpha-3.d: Regenerated.
