* emulparams/vax.sh (OUTPUT_FORMAT): Use "a.out".
* scripttempl/go32coff.sc: Changes from DJ Delorie: Change default entry point
to "start". Align at end of each section to 0x200. Start .text section 0x1000
later. Add _etext, _edata, _end symbols.
* Makefile.in (install-info): Install info files from whatever directory they
were found in.
Patch from DJ Delorie:
* configure.bat: do c++filt -> cxxfilt right
* sysinfo.y: Include system header files early, so any potential declaration of
abort() occurs before its use.
* strings.c (strings_file): Try opening the file in binary mode first.
* configure.in: Put AC_DEFINE(sparcv9) on its own line, so that the shell
variable settings associated with it are permanent. For CPUs requiring
bfd_gas=yes, select it based on CPU only, not individual target names. Handle
m68k-hp-hpux*, not just -hpux.
* config/tc-z8k.c (tc_coff_symbol_emit_hook): Add dummy argument to match
prototype in obj-coff.h.
* configure.in: Skip tests for defining WANT_FOPEN_BIN and IBM_COMPILER_SUX.
* acconfig.h: Deleted them.
* configure, conf.in: Rebuild with autoconf 2.0.
* config/go32.cfg, config/vms-conf.h: Updated.
* config/tc-m68k.c (md_apply_fix_2, md_convert_frag_1): Always use
IBM_COMPILER_SUX version of code, with comments indicating why.
* listing.c (file_info): Use text mode when opening file for read. Use "r"
directly, no macro.
* input-file.c (input_file_open): Don't use FOPEN_RT, just use "r".
* read.c (s_include): Ditto.
* output-file.c (output_file_create): Try both "wb" and "w", don't bother with
FOPEN_* macros.
* as.h: Don't include fopen-*.h.
* config/alpha-opcode.h: Make "ret" with no operands equivalent to "ret
zero,(ra)", to match OSF1 and to be consistent with both one-operand forms.
Patches from DJ Delorie:
* as.h (alloca): undef alloca before defining it just in case
* config/go32.cfg: new file for autoconf values
* config/te-go32.h: new file
* configure.bat: new for autoconf
* config/tc-i386.c (md_assemble): Fix typo in GOTPC check; had = for ==.
* configure.in: If target_frag doesn't exist, use /dev/null.
* as.c (parse_args): For non-VMS systems, re-add `v' to std_shortopts. Add
"verbose" to list of long options.
* write.c (adjust_reloc_syms): When generating an absolute section symbol as a
placeholder, don't mark it as used in a relocation entry, here.
* Makefile.in (comparison): Compare using makefile code from gcc, stripped down
to discard subdir stuff and adapted to give a non-zero exit status if either
file differs.
* Makefile.in (DEVO_SUPPORT): Include configure.bat and makeall.bat.
(DISTDOCDIRS): Add `etc'.
(ETC_SUPPORT_PFX): New variable.
(taz): Include anything from etc starting with a word in ETC_SUPPORT_PFX.
next_link_map_member, xfer_link_map_member): Retrieve and use
shared library relocation offset from runtime loader structures.
Use libxproc.a routines to get a working version if
USE_LDR_ROUTINES is defined.
* README: Remove item about shared library relocation for
Alpha OSF/1.
Change VMS version to use bfd_alloc rather than malloc, so that we
don't lose the memory forever.
(_bfd_construct_extended_name_table): Check the name of an archive
entry which is not being extended, and correct it if it is wrong.
This is necessary in case the archive was constructed by another
program which put an entry in the extended name table which we
don't plan to put in ourselves. From jjc@jclark.com (James
Clark).
(bfd_dont_truncate_arname): Check return value of normalize.
composed of different object file formats.
(ldctor_build_sets): If the output format does not support the
reloc, and we are not generating a relocateable link, try getting
the reloc from the input format.
available.
* configure.in (ENABLE_CLIBS): Use $(TCL) and $(TK) instead of
-ltcl and -ltk.
* gdbtk.c: Get rid of lots of unnecessary #includes.
* (gdbtk_init): Use ConnectionNumber macro instead of referencing
Display structure directly.
* gdbtk.tcl: Change exit button to quit button (makes shebs
happy).
(ELF32_PARISC_SX_GET, ELF32_PARISC_SX_PUT): Define.
(symextn_entry): Don't define.
(symext_chain_size): Change type to bfd_size_type.
(symextn_contents): Change type to bfd_byte *.
(elf32_hppa_backend_begin_write_processing): Use
ELF32_PARISC_SX_SIZE instead of sizeof (symext_entryS).
(elf32_hppa_size_symext): Likewise. Also, change type of sizep to
bfd_size_type *.
(elf_hppa_tc_make_sections): Cast symextn_contents assignment to
bfd_byte *. Use ELF32_PARISC_SX_PUT instead of direct assignment.
(elf32_hppa_backend_symbol_table_processing): Use
ELF32_PARISC_SX_SIZE instead of sizeof (symext_entryS). Use
ELF32_PARISC_SX_GET insetad of direct assignment.
(elf32_hppa_read_symext_info): Change type of contents, and its
assignment cast, to bfd_byte *. Use ELF32_PARISC_SX_SIZE instead
of sizeof (symextn_entry). Use symext_entryS instead of
symextn_entry. Use ELF32_PARISC_SX_GET instead of direct
assignment.
and DT_FINI dynamic entries based on the existence of _init and
_fini symbols, not on the .init and .fini sections. This is
compatible with some SVR4 linkers.
(elf_bfd_final_link): Corresponding change.
error if an empty archive has no symbol table.
* ecoff.c (ecoff_link_add_archive_symbols): Likewise.
* elfcode.h (elf_link_add_archive_symbols): Likewise.
Don't test for zero backchain pointer to recognize a signal
handler frame, if read() gets interrupted by a signal, the
backchain will be non zero.
(SIG_FRAME_FP_OFFSET): Move to here from rs6000-tdep.c,
improve comment.
(SIG_FRAME_PC_OFFSET): New definition.
(FRAME_SAVED_PC): Return saved pc from sigcontext if this
is a signal handler frame.
* rs6000-tdep.c (function_frame_info): Do not error out
if we can't access the instructions.
* config/rs6000/tm-rs6000.h (CONVERT_FROM_FUNC_PTR_ADDR):
New definition to get the function address from a function pointer.
* valops.c (find_function_addr): Use it when calling a user
function through a function pointer.
symbol_completion_function, takes the line buffer and the
point in the line buffer as additional arguments.
(readline_line_completion_function): New function, interface
between readline and line_completion_function.
(init_main): Use it.
(complete_command): Use line_completion_function instead of
abusing rl_line_buffer. Free completion strings after printing
them.
* symtab.c (completion_list_add_name): Recheck for duplicates
if we intend to add a modified symbol.
* gdbtypes.h (cplus_struct_type): nfn_fields_total no longer
includes the number of methods from the baseclasses.
* stabsread.c (attach_fn_fields_to_type): No longer add the
number of methods from the baseclasses to TYPE_NFN_FIELDS_TOTAL,
the baseclass type might not have been completely filled in yet.
* symtab.c (total_number_of_methods): New function to compute
the total number of methods for a type, including the methods
from baseclasses.
(decode_line_1): Use it instead of TYPE_NFN_FIELDS_TOTAL to
allocate the symbol array for find_methods.
* stabsread.c (scan_file_globals): Add default case to minimal
symbol type switch, to avoid gcc -Wall warnings.
* config/rs6000/tm-rs6000.h (INIT_EXTRA_FRAME_INFO):
Don't test for zero backchain pointer to recognize a signal
handler frame, if read() gets interrupted by a signal, the
backchain will be non zero.
(SIG_FRAME_FP_OFFSET): Move to here from rs6000-tdep.c,
improve comment.
(SIG_FRAME_PC_OFFSET): New definition.
(FRAME_SAVED_PC): Return saved pc from sigcontext if this
is a signal handler frame.
* rs6000-tdep.c (function_frame_info): Do not error out
if we can't access the instructions.
* config/rs6000/tm-rs6000.h (CONVERT_FROM_FUNC_PTR_ADDR):
New definition to get the function address from a function pointer.
* valops.c (find_function_addr): Use it when calling a user
function through a function pointer.
(mmalloc.h): Include.
* mmalloc.h: Remove all but declarations of mmalloc functions.
(ansidecl.h): Include.
* attach.c, et al: Include mmprivate.h instead of mmalloc.h.
