address.
* (remote_ops extended_remote_ops remote_desc remote_write_size):
Make static.
* (remote_fetch_registers remote_write_bytes remote_read_bytes):
Record size of response to fetch registers command, use this to
limit size of memory read and write commands.
* (push_remote_target): New function to make it possible to have
another target switch to the remote target.
* target.h: Add prototype for push_remote_target.
* sh-tdep.c (sh_frame_find_saved_regs): Fix sign extension bugs
for hosts which default to unsigned chars (such as SGI's).
* (_initialize_sh_tdep): Don't set remote_write_size. It's now
handled automatically in remote.c.
Added some generic target-independant code for managing call-dummy frames.
Wed Nov 27 10:32:14 1996 Michael Snyder <msnyder@cleaver.cygnus.com>
* breakpoint.c: DELETE command will not delete CALL_DUMMY breakpoint.
* blockframe.c: Add target-independant support for managing
CALL_DUMMY frames on the host side.
* frame.h: Declarations for generic CALL_DUMMY frame support.
* h8300-tdep.c: Add target function calls using generic frame support.
* config/h8300/tm-h8300.h: config for generic target function calls.
start-sanitize-m32r
* m32r-tdep.c: Add target function calls using generic frame support.
* config/m32r/tm-m32r.h: config for generic target function calls.
end-sanitize-m32r
* sh-tdep.c: Add target function calls using generic frame support.
* config/sh/tm-sh.h: config for generic target function calls.
start-sanitize-v850
* v850-tdep.c: Add target function calls using generic frame support.
* config/v850/tm-v850.h: config for generic target function calls.
end-sanitize-v850
* valops.c: ADD PUSH_RETURN_ADDRESS so that it doesn't have to be
done by PUSH_ARGUMENTS when there's no CALL_DUMMY.
* sh-tdep.c: Add functionality for target function calls.
* config/sh/tm-sh.h: Add support for target function calls.
This is a safety check-in: everything works, and there'll be another
clean-up round shortly.
be consistent with GCC.
(FPUL_REGNUM, etc): Renumber to match list changes.
(ADDR_BITS_REMOVE): Delete.
* sh-tdep.c (sh_reg_names, sh3_reg_names, sh3e_reg_names):
Rearrange to match REGISTER_NAMES.
* sh3-rom.c (sh3_regnames, sh3e_regnames): Ditto.
PR 9457
* sh-tdep.c (set processor): New command to set specific
processor type.
(sh_reg_names, sh3_reg_names): Arrays of register names for
SH and SH3 processors.
(sh_set_processor_type): New function.
* sh3-rom.c (sh3_open): Call it.
(sh3_regname): Add names of all the bank registers.
(sh3_supply_register): Clean up formatting.
* config/sh/tm-sh.h (NUM_REGS, NUM_REALREGS): Increase to include
bank registers.
(REGISTER_NAMES): Add names of bank registers.
(FP15_REGNUM): Define.
(REGISTER_VIRTUAL_TYPE): Use it.
* monitor.c: Clean up some comments.
S-record download code into srec.c.
* srec.c srec.h: New files. Contain S-record loading routines
formerly in monitor.c.
* serial.c serial.h: New routine just like fprintf, but uses
serial_t instead of FILE *.
* sh-tdep.c (frame_find_saved_regs init_extra_frame_info):
Don't add four to saved pc (makes things match manual). Also, fix
bug where we didn't get pc from stack frame correctly.
* config/sh/tm-sh.h (SAVED_PC_AFTER_CALL): Don't add four to
saved pc. Real hardware does this for you.
* sh3-rom.c (sh3_load): New routine. Sets up for download then
calls generic S-record loader.
* config/h8300/h8300.mt, config/h8500/h8500.mt,
config/m68k/monitor.mt, config/pa/hppapro.mt, config/sh/sh.mt:
Add srec.o to TDEPFILES.
(BC_BREAKPOINTS): Disable.
* sh-tdep.c (print_insn): Cope with big and little endian machines.
* sh/sh.mt: Use libsim.a
* sh/tm-sh.h (TARGET_BYTE_ORDER_SELECTABLE): New
(BREAKPOINT): Changed to be byteorder independent.
and stack pointer during stepping, to speed things up.
A. Changes to not select a frame until we need a selected frame:
* blockframe.c (flush_cached_frames): Call select_frame (NULL, -1).
* infrun.c (wait_for_inferior): Move call to select_frame back to
normal_stop. This reverts a change of 13 Apr 94 (it says Jeff
Law, but the change was my idea); the only reason for that change
was so we could save and restore the selected frame in
wait_for_inferior, and now that flush_cached frames clears the
selected frame, that should work OK now.
B. Changes to not create a current_frame until we need one:
* blockframe.c (get_current_frame): If current_frame is NULL, try
to create an innermost frame.
* sparc-tdep.c (sparc_pop_frame), infcmd.c (run-stack_dummy),
infrun.c (wait_for_inferior), thread.c (thread_switch),
convex-tdep.c (set_thread_command), a29k-tdep.c (pop_frame),
alpha-tdep.c (alpha_pop_frame), convex-xdep.c (core_file_command),
h8300-tdep.c (h8300_pop_frame), h8500-tdep.c (h8300_pop_frame),
hppa-tdep.c (hppa_pop_frame), i386-tdep.c (i386_pop_frame),
i960-tdep.c (pop_frame), m68k-tdep.c
(m68k_pop_frame), mips-tdep.c (mips_pop_frame), rs6000-tdep.c
(push_dummy_frame, pop_dummy_frame, pop_frame), sh-tdep.c
(pop_frame), config/arm/tm-arm.h (POP_FRAME),
config/convex/tm-convex.h (POP_FRAME), config/gould/tm-pn.h
(POP_FRAME), config/ns32k/tm-merlin.h (POP_FRAME),
config/ns32k/tm-umax.h (POP_FRAME), config/tahoe/tm-tahoe.h
(POP_FRAME), config/vax/tm-vax.h (POP_FRAME): Don't
call create_new_frame.
* corelow.c (core_open), altos-xdep.c (core_file_command),
arm-xdep.c (core_file_command), gould-xdep.c (core_file_command),
m3-nat.c (select_thread), sun386-nat.c (core_file_command),
umax-xdep.c (core_file_command): Don't call create_new_frame; do
call flush_cached_frames.
* blockframe.c (reinit_frame_cache): Don't call create_new_frame
or select_frame.
C. Changes to get rid of stop_frame_address and instead only
fetch the frame pointer when we need it.
* breakpoint.c (bpstat_stop_status): Remove argument
frame_address; use FRAME_FP (get_current_frame ()).
* infrun.c (wait_for_inferior): Don't pass frame pointer to
bpstat_stop_status.
* infrun.c (wait_for_inferior): Use FRAME_FP (get_current_frame
()) instead of stop_frame_address.
* infrun.c (save_inferior_status, restore_inferior_status),
inferior.h (struct inferior_status): Don't save and restore
stop_frame_address.
* inferior.h, infcmd.c, thread.c (thread_switch), m3-nat.c
(select_thread): Remove stop_frame_address and uses thereof.
D. Same thing for the stack pointer.
* infrun.c (wait_for_inferior): Remove stop_sp and replace
uses thereof with read_sp ().
E. Change to eliminate one nasty little spot where we were
wanting to know the frame pointer from before the current step
(idea from GDB 3.5, which saved my ass, because my other ideas of
how to fix it were very baroque).
* infrun.c: Remove prev_frame_address.
* infrun.c (wait_for_inferior, step_over_function): Use
step_frame_address instead of prev_frame_address.
F. Same basic idea for the stack pointer.
* inferior.h, infcmd.c: New variable step_sp.
* infcmd.c (step_1, until_next_command): Set it.
* infrun.c: Remove prev_sp and replace uses by step_sp.
* infrun.c (wait_for_inferior): If we get out of the step
range, then set step_sp to the current stack pointer before we
start going again.
* remote.c (fromhex): Make error more explicit.
(read_frame): Don't print bad checksum information unless
remote_debugging. Don't use repeat count unless it's > 0.
* remote-e7000.c (expect): When echoing, ignore multiple newlines.
(e7000_insert_breakpoint, e7000_remove_breakpoint, target_ops): Optionally
cope with BC style breakpoints.
(e7000_command): After command send directly to the E7000 mark
registers as changed.
(why_stop, e7000_wait: Understand BC style stop condition.
* sh-tdep.c (sh_skip_prologue): Understand more complicated
sequences. (frame_find_saved_regs): Likewise.
* config/h8500/tm-h8500.h (target_write_pc, TARGET_WRITE_PC):
Handle extra arg.
* config/i386/xm-go32.h (GDBINIT_FILENAME): Set to gdb.ini.
(more work here to come)
* config/sh/tm-sh.h (EXTRA_FRAME_INFO): Add f_offset and leaf_function
fields.
* h8500-tdep.c (saved_pc_after_call): The size of the
pc is memory model dependent. (segmented_command,
unsegmented_command, _initialize_h8500_tdep): New commands to
change memory model.
* remote-7000.c (initialize_remote_e7000): Change name of snoop
command.
* remote-hms.c (hms_load): Remove breakpoints when loaded.
(hms_wait): Use new status structure
(hms_open): Push the target here. (hms_before_main_loop): Not
here. (supply_val, hms_fetch_register, hms_store_register): Cope
with H8/500 names too.
* sh-tdep.c (show_regs, initialize_sh_tdep): New command to print
all registers in a compact way.
Change all references to stdout/stderr to gdb_stdout/gdb_stderr.
Replace all calls to stdio output functions with calls to
corresponding _unfiltered functions (`fprintf_unfiltered')
Replaced calls to fopen for output to gdb_fopen.
Added sufficient goo to utils.c and defs.h to make the above work.
The net effect is that stdio output functions are only directly used
in utils.c. Elsewhere, the _unfiltered and _filtered functions and
GDB_FILE type are used.
In the near future, GDB_FILE will stop being equivalant to FILE.
The semantics of some commands has changed in a very subtle way:
called in the right context, they may cause new occurences of
prompt_for_continue() behavior. The testsuite doesn't notice anything
like this, though.
Please respect this change by not reintroducing stdio output
dependencies in the main body of gdb code. All output from commands
should go to a GDB_FILE.
Target-specific code can still use stdio directly to communicate with
targets.
cleans up all kinds of hassles (which nm to use in munch, etc). The
new formatting conventions (mostly already followed) are that
the name of the _initialize_* routines must start in column zero,
and must not be inside #if.
* munch: Removed.
* Makefile.in: Remove references to munch.
* serial.c, remote.c, infptrace.c, maint.c, convex-tdep.c,
alpha-tdep.c, hp300ux-nat.c, hppab-nat.c, osfsolib.c, remote-es.c,
procfs.c, remote-udi.c, ser-go32.c, ultra3-xdep.c, sh-tdep.c,
i960-tdep.c, hppa-tdep.c, h8500-tdep.c, dpx2-nat.c, delta68-nat.c,
z8k-tdep.c: Make sure the above conventions are followed. Make
sure they are all declared as returning void. Clean up
miscellaneous comments and such.
host.
* sh-tdep.c (frame_find_saved_regs): Use NUM_REGS rather than hard
wired (and wrong) constant.
* values.c (unpack_long): Add case to unpack when target object is
sizeof(int).
* config/sh/tm-sh.h (REGISTER_NAMES): Know about the news ones the
simulator defines.
