* configure: Regenerate.
* config/tc-ppc.c (PPC_LO, PPC_HI, PPC_HA, PPC_HIGHER,
PPC_HIGHERA, PPC_HIGHEST, PPC_HIGHESTA, SEX16): New macros.
(md_assemble): Use them.
(ppc_machine): Support stub for ELF64 as well as XCOFF.
(md_pseudo_table): Add "llong", "quad".
(md_parse_option): Match default_cpu of powerpc*.
(ppc_arch): Likewise.
(ppc_subseg_align): Only for OBJ_XCOFF.
(ppc_target_format): Return elf64-powerpc strings for 64 bit ELF.
(md_begin): Select PPC_OPCODE_64 for 64 bit.
(ppc_insert_operand): Don't bother testing 'file' before calling
as_bad_where. Use as_bad_where for operand->insert errors.
(mapping): Add ELF64 relocation modifiers.
(ppc_elf_suffix): Replace symbol on BFD_RELOC_PPC64_TOC reloc
expressions with abs_symbol.
(ppc_elf_cons): Correct offset for little endian targets.
(ppc_elf_frob_symbol): New.
(md_assemble): Add support for 64 bit ELF relocs.
(ppc_tc): Ensure 8 byte alignment when 64 bit.
(ppc_is_toc_sym): Only define for OBJ_XCOFF and OBJ_ELF. Match
".toc" section for 64 bit ELF.
(ppc_fix_adjustable): New. Macro body moved from tc-ppc.h.
(md_apply_fix3): Silence warning with ATTRIBUTE_UNUSED. Only do
the ppc_is_toc_sym check for OBJ_XCOFF and OBJ_ELF. For 64 bit,
use BFD_RELOC_PPC64_TOC16_DS instead of BFD_RELOC_PPC_TOC16.
Expand on comments, error message. Add support for 64 bit relocs,
and use PPC_HI etc. macros.
* config/tc-ppc.h (MAX_MEM_FOR_RS_ALIGN_CODE): Define.
(HANDLE_ALIGN): Define to generate nops in code sections rather
than zeros.
(TC_FORCE_RELOCATION): Force for BFD_RELOC_PPC64_TOC.
(ELF_TC_SPECIAL_SECTIONS): Add 64 bit ELF sections.
(tc_fix_adjustable): Move body of macro to tc-ppc.c.
(ppc_fix_adjustable): Declare.
(tc_frob_symbol): Define.
(ppc_elf_frob_symbol): Declare.
* configure.in: Add the em type for FreeBSD targets.
* configure: Regenerate.
Approved by: Alan Modra <amodra@one.net.au>
<20010414192409.C16364@squeak.one.net.au>
Philip Blundell <philb@gnu.org>
<E14o06W-0002IT-00@kings-cross.london.uk.eu.org>
* config/tc-mips.c: Support ELF64 for traditional MIPS targets.
* Makefile.am: (TARG_ENV_HFILES): Add tc-mips.h.
* Makefile.in: Regenerated.
* configure.in: Use traditional MIPS targets for Linux/MIPS.
* configure: Regenerated.
* configure.in (cpu_type, arch): Add a generic FreeBSD specification as
all FreeBSD platforms should look the same at this level.
* configure: Rebuilt.
* config/tc-i386.c: Add support for old FreeBSD a.out hosts.
Approved by: Philip Blundell <philb@gnu.org>
Message-Id: <E14URxF-00023n-00@kings-cross.london.uk.eu.org>
* configure.in: Make 'mipself' and 'mipsecoff' emulations
map to MIPS-specific files, as they used to do before the
change on 2000-05-21.
* configure: Regerate.
* tc-i386.c (md_assemble): Return after the error message;
move testing for 64bit operands to proper place.
* i386.exp: Add tests for presence of 32bit versus 64bit output
format; run both 64bit and 32bit tests when format is available;
add x86_64 test.
* x86_64.s: New file.
* x86_64.d: New file.
* config/tc-ia64.c (md_shortopts, md_parse_option, md_show_usage):
Change M to m for -milp32 or -mlp64 to match gcc.
(dot_endp): Use bytes_per_address instead of 8.
(emit_one_bundle): Use number_to_chars_littleendian instead of
md_number_to_chars.
(fix_insn): Likewise.
(ia64_init): New function.
(ia64_target_format): New function.
(md_begin): Set endianness, arch, and machine as appropriate.
* config/tc-ia64.h: (TARGET_BYTES_BIG_ENDIAN, md_number_to_chars):
Make these macros depend on TE_HPUX macro.
(TARGET_FORMAT): Define.
(HOST_SPECIAL_INIT): Define.
* config/te-hpux.h: New file.
* configure.in: Add "ia64-*-hpux*" target to configure.
* configure: Regenerate.
* config.in (STRICTCOFF): New for strict COFF.
* configure.in: Define STRICTCOFF for i386-*-msdosdjgpp*,
i386-*-go32* and i386-go32-rtems*.
* configure: Rebuilt.
* config/obj-coff.c (obj_coff_endef): Follow the historical
behavior if STRICTCOFF is not defined.
* doc/internals.texi: Document STRICTCOFF.
* configure.in: Add bits for i860-stardent-{sysv4, elf}*.
* configure: Regenerated.
* config/obj-elf.c (obj_elf_type): Recognize a fifth type
of operand to the .type directive (.e.g, "type").
* configure.in: Add entry for mips-*-sysv4*MP*
* configure: Rebuild
* config/tc-mips.c (mips_target_format): Return elf32-tradbigmips or
elf32-tradlittlemips for traditional mips targets.
* config/tc-mips.c (md_estimate_size_before_relax): Duplicate the
test for Link Once sections as in adjust_reloc_syms.
* config/te-tmips.h: New file for traditional mips targets. Define
TE_TMIPS.
(s_desc): Add ATTRIBUTE_UNUSED to args as appropriate.
* read.h (aout_process_stab): Declare.
* configure.in (EMULATIONS) [i386aout, i386coff, i386elf]:
Generalize to *aout, *coff *elf.
* configure: Regenerated.
* doc/internals.texi (Object format backend): Say
SEPARATE_STAB_SECTIONS needs to be nonzero, not just defined.
Add ``-W -Wall'' to sub-directories bfd, binutils, gas gprof, ld and
opcodes by the addition of WARN_CFLAGS to Makefile.am and configury to
set it. Add configure option --enable-build-warnings.
Re-generate all and sundry using auto*-000227.
assembler. ie. You will be able to do "as --em=i386aout" on an x86
linux-elf assembler to generate aout format object files, rather than
using a separate assembler. The aout emulation is enabled by giving
"--enable-targets=i386-linuxaout" to configure.
Oh yeah, there's a couple of fixes too. Error messages shouldn't be
passed to printf in the format arg just in case someone puts a `%' in
the message.
* config/tc-i960.c: Several minor changes to add ELF and
BFD_ASSEMBLER support.
* config/tc-i960.h: Likewise.
* configure.in (i960-*-elf*): New target.
* aclocal.m4, configure: Rebuild.
