* linux-low.c (linux_attach_lwp): Do not _exit after errors.
(linux_kill, linux_detach): Clean up the process list.
* remote-utils.c (remote_open): Improve port number parsing.
(putpkt_binary, input_interrupt): Only send interrupts if the target
is running.
* server.c (extended_protocol): Make static.
(attached): Define earlier.
(exit_requested, response_needed, program_argv): New variables.
(target_running): New.
(start_inferior): Clear attached here.
(attach_inferior): Set attached here.
(require_running): Define.
(handle_query): Use require_running and target_running. Implement
"monitor exit".
(handle_v_attach, handle_v_run): New.
(handle_v_requests): Use require_running. Handle vAttach and vRun.
(gdbserver_usage): Update.
(main): Redo argument parsing. Handle --debug and --multi. Handle
--attach along with other options or after the port. Save
program_argv. Support no initial program. Resynchronize
communication with GDB after an error. Handle "monitor exit".
Use require_running and target_running. Always allow the extended
protocol. Do not error out for Hc0 or Hc-1. Do not automatically
restart in extended mode.
* README: Refer to the GDB manual. Update --attach usage.
* remote.c (struct remote_state): Add cached_wait_status.
(remote_exec_file): New variable.
(PACKET_vAttach, PACKET_vRun): New constants.
(extended_remote_restart): Do not query for status.
(struct start_remote_args): New.
(remote_start_remote): Take it as a second argument. Check
whether the target is running. Issue an error for non-running
non-extended targets. Cache the wait status. Set inferior_ptid
here.
(remote_open_1): Prompt to disconnect non-running targets. Make
sure the target is marked running. Do not set inferior_ptid here.
Update call to remote_start_remote. Do not call remote_check_symbols
if the target is not running.
(remote_detach_1): Rename from remote_detach. Take an EXTENDED
argument. Handle a non-running target.
(remote_detach): Use it.
(extended_remote_detach): New.
(remote_disconnect): Fix typo. Use remoute_mourn_1.
(extended_remote_attach_1, extended_remote_attach)
(extended_async_remote_attach): New.
(remote_vcont_resume): Remove unused variable.
(remote_wait, remote_async_wait): Use any cached wait status.
(putpkt_binary, getpkt): Clear any cached wait status.
(extended_remoute_mourn_1): New.
(extended_remote_mourn): Use it.
(extended_async_remote_mourn, extended_remote_run): New.
(extended_remote_create_inferior_1): New.
(extended_remote_create_inferior): Use it.
(extended_remote_async_create_inferior): Likewise.
(remote_xfer_partial): Skip for non-executing targets.
(init_extended_remote_ops): Set to_detach and to_attach.
(init_extended_async_remote_ops): Likewise. Use
extended_async_remote_mourn.
(_initialize_remote): Register vAttach, vRun, and
set remote exec-file.
* NEWS: Mention vAttach, vRun, and gdbserver extended-remote support.
* gdb.server/ext-attach.c, gdb.server/ext-attach.exp,
gdb.server/ext-run.exp: New files.
* lib/gdbserver-support.exp (gdbserver_download): New.
(gdbserver_start): New. Update gdbserver expected
output.
(gdbserver_spawn): Use them.
(gdbserver_start_extended): New.
* gdb.texinfo (Using the `gdbserver' Program): Add security
warning. Rearrange into subsections and subsubsections. Document
--multi and --debug. Correct --with-sysroot typo. Update --attach
usage. Make load reference clearer. Document monitor exit.
(Remote Configuration): Document set remote exec-file, attach-packet,
and run-packet.
(Packets): Document vAttach and vRun.
2008-01-30 00:51:50 +00:00
|
|
|
# This testcase is part of GDB, the GNU debugger.
|
|
|
|
|
|
2015-01-01 09:32:14 +00:00
|
|
|
# Copyright 2007-2015 Free Software Foundation, Inc.
|
* linux-low.c (linux_attach_lwp): Do not _exit after errors.
(linux_kill, linux_detach): Clean up the process list.
* remote-utils.c (remote_open): Improve port number parsing.
(putpkt_binary, input_interrupt): Only send interrupts if the target
is running.
* server.c (extended_protocol): Make static.
(attached): Define earlier.
(exit_requested, response_needed, program_argv): New variables.
(target_running): New.
(start_inferior): Clear attached here.
(attach_inferior): Set attached here.
(require_running): Define.
(handle_query): Use require_running and target_running. Implement
"monitor exit".
(handle_v_attach, handle_v_run): New.
(handle_v_requests): Use require_running. Handle vAttach and vRun.
(gdbserver_usage): Update.
(main): Redo argument parsing. Handle --debug and --multi. Handle
--attach along with other options or after the port. Save
program_argv. Support no initial program. Resynchronize
communication with GDB after an error. Handle "monitor exit".
Use require_running and target_running. Always allow the extended
protocol. Do not error out for Hc0 or Hc-1. Do not automatically
restart in extended mode.
* README: Refer to the GDB manual. Update --attach usage.
* remote.c (struct remote_state): Add cached_wait_status.
(remote_exec_file): New variable.
(PACKET_vAttach, PACKET_vRun): New constants.
(extended_remote_restart): Do not query for status.
(struct start_remote_args): New.
(remote_start_remote): Take it as a second argument. Check
whether the target is running. Issue an error for non-running
non-extended targets. Cache the wait status. Set inferior_ptid
here.
(remote_open_1): Prompt to disconnect non-running targets. Make
sure the target is marked running. Do not set inferior_ptid here.
Update call to remote_start_remote. Do not call remote_check_symbols
if the target is not running.
(remote_detach_1): Rename from remote_detach. Take an EXTENDED
argument. Handle a non-running target.
(remote_detach): Use it.
(extended_remote_detach): New.
(remote_disconnect): Fix typo. Use remoute_mourn_1.
(extended_remote_attach_1, extended_remote_attach)
(extended_async_remote_attach): New.
(remote_vcont_resume): Remove unused variable.
(remote_wait, remote_async_wait): Use any cached wait status.
(putpkt_binary, getpkt): Clear any cached wait status.
(extended_remoute_mourn_1): New.
(extended_remote_mourn): Use it.
(extended_async_remote_mourn, extended_remote_run): New.
(extended_remote_create_inferior_1): New.
(extended_remote_create_inferior): Use it.
(extended_remote_async_create_inferior): Likewise.
(remote_xfer_partial): Skip for non-executing targets.
(init_extended_remote_ops): Set to_detach and to_attach.
(init_extended_async_remote_ops): Likewise. Use
extended_async_remote_mourn.
(_initialize_remote): Register vAttach, vRun, and
set remote exec-file.
* NEWS: Mention vAttach, vRun, and gdbserver extended-remote support.
* gdb.server/ext-attach.c, gdb.server/ext-attach.exp,
gdb.server/ext-run.exp: New files.
* lib/gdbserver-support.exp (gdbserver_download): New.
(gdbserver_start): New. Update gdbserver expected
output.
(gdbserver_spawn): Use them.
(gdbserver_start_extended): New.
* gdb.texinfo (Using the `gdbserver' Program): Add security
warning. Rearrange into subsections and subsubsections. Document
--multi and --debug. Correct --with-sysroot typo. Update --attach
usage. Make load reference clearer. Document monitor exit.
(Remote Configuration): Document set remote exec-file, attach-packet,
and run-packet.
(Packets): Document vAttach and vRun.
2008-01-30 00:51:50 +00:00
|
|
|
|
|
|
|
|
# This program is free software; you can redistribute it and/or modify
|
|
|
|
|
# it under the terms of the GNU General Public License as published by
|
|
|
|
|
# the Free Software Foundation; either version 3 of the License, or
|
|
|
|
|
# (at your option) any later version.
|
|
|
|
|
#
|
|
|
|
|
# This program is distributed in the hope that it will be useful,
|
|
|
|
|
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
|
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
|
# GNU General Public License for more details.
|
|
|
|
|
#
|
|
|
|
|
# You should have received a copy of the GNU General Public License
|
|
|
|
|
# along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
|
|
|
|
|
|
|
|
# Test attaching to already-running programs using extended-remote.
|
|
|
|
|
|
|
|
|
|
load_lib gdbserver-support.exp
|
2013-06-25 13:01:28 +00:00
|
|
|
load_lib trace-support.exp
|
* linux-low.c (linux_attach_lwp): Do not _exit after errors.
(linux_kill, linux_detach): Clean up the process list.
* remote-utils.c (remote_open): Improve port number parsing.
(putpkt_binary, input_interrupt): Only send interrupts if the target
is running.
* server.c (extended_protocol): Make static.
(attached): Define earlier.
(exit_requested, response_needed, program_argv): New variables.
(target_running): New.
(start_inferior): Clear attached here.
(attach_inferior): Set attached here.
(require_running): Define.
(handle_query): Use require_running and target_running. Implement
"monitor exit".
(handle_v_attach, handle_v_run): New.
(handle_v_requests): Use require_running. Handle vAttach and vRun.
(gdbserver_usage): Update.
(main): Redo argument parsing. Handle --debug and --multi. Handle
--attach along with other options or after the port. Save
program_argv. Support no initial program. Resynchronize
communication with GDB after an error. Handle "monitor exit".
Use require_running and target_running. Always allow the extended
protocol. Do not error out for Hc0 or Hc-1. Do not automatically
restart in extended mode.
* README: Refer to the GDB manual. Update --attach usage.
* remote.c (struct remote_state): Add cached_wait_status.
(remote_exec_file): New variable.
(PACKET_vAttach, PACKET_vRun): New constants.
(extended_remote_restart): Do not query for status.
(struct start_remote_args): New.
(remote_start_remote): Take it as a second argument. Check
whether the target is running. Issue an error for non-running
non-extended targets. Cache the wait status. Set inferior_ptid
here.
(remote_open_1): Prompt to disconnect non-running targets. Make
sure the target is marked running. Do not set inferior_ptid here.
Update call to remote_start_remote. Do not call remote_check_symbols
if the target is not running.
(remote_detach_1): Rename from remote_detach. Take an EXTENDED
argument. Handle a non-running target.
(remote_detach): Use it.
(extended_remote_detach): New.
(remote_disconnect): Fix typo. Use remoute_mourn_1.
(extended_remote_attach_1, extended_remote_attach)
(extended_async_remote_attach): New.
(remote_vcont_resume): Remove unused variable.
(remote_wait, remote_async_wait): Use any cached wait status.
(putpkt_binary, getpkt): Clear any cached wait status.
(extended_remoute_mourn_1): New.
(extended_remote_mourn): Use it.
(extended_async_remote_mourn, extended_remote_run): New.
(extended_remote_create_inferior_1): New.
(extended_remote_create_inferior): Use it.
(extended_remote_async_create_inferior): Likewise.
(remote_xfer_partial): Skip for non-executing targets.
(init_extended_remote_ops): Set to_detach and to_attach.
(init_extended_async_remote_ops): Likewise. Use
extended_async_remote_mourn.
(_initialize_remote): Register vAttach, vRun, and
set remote exec-file.
* NEWS: Mention vAttach, vRun, and gdbserver extended-remote support.
* gdb.server/ext-attach.c, gdb.server/ext-attach.exp,
gdb.server/ext-run.exp: New files.
* lib/gdbserver-support.exp (gdbserver_download): New.
(gdbserver_start): New. Update gdbserver expected
output.
(gdbserver_spawn): Use them.
(gdbserver_start_extended): New.
* gdb.texinfo (Using the `gdbserver' Program): Add security
warning. Rearrange into subsections and subsubsections. Document
--multi and --debug. Correct --with-sysroot typo. Update --attach
usage. Make load reference clearer. Document monitor exit.
(Remote Configuration): Document set remote exec-file, attach-packet,
and run-packet.
(Packets): Document vAttach and vRun.
2008-01-30 00:51:50 +00:00
|
|
|
|
2012-06-25 19:46:26 +00:00
|
|
|
standard_testfile
|
* linux-low.c (linux_attach_lwp): Do not _exit after errors.
(linux_kill, linux_detach): Clean up the process list.
* remote-utils.c (remote_open): Improve port number parsing.
(putpkt_binary, input_interrupt): Only send interrupts if the target
is running.
* server.c (extended_protocol): Make static.
(attached): Define earlier.
(exit_requested, response_needed, program_argv): New variables.
(target_running): New.
(start_inferior): Clear attached here.
(attach_inferior): Set attached here.
(require_running): Define.
(handle_query): Use require_running and target_running. Implement
"monitor exit".
(handle_v_attach, handle_v_run): New.
(handle_v_requests): Use require_running. Handle vAttach and vRun.
(gdbserver_usage): Update.
(main): Redo argument parsing. Handle --debug and --multi. Handle
--attach along with other options or after the port. Save
program_argv. Support no initial program. Resynchronize
communication with GDB after an error. Handle "monitor exit".
Use require_running and target_running. Always allow the extended
protocol. Do not error out for Hc0 or Hc-1. Do not automatically
restart in extended mode.
* README: Refer to the GDB manual. Update --attach usage.
* remote.c (struct remote_state): Add cached_wait_status.
(remote_exec_file): New variable.
(PACKET_vAttach, PACKET_vRun): New constants.
(extended_remote_restart): Do not query for status.
(struct start_remote_args): New.
(remote_start_remote): Take it as a second argument. Check
whether the target is running. Issue an error for non-running
non-extended targets. Cache the wait status. Set inferior_ptid
here.
(remote_open_1): Prompt to disconnect non-running targets. Make
sure the target is marked running. Do not set inferior_ptid here.
Update call to remote_start_remote. Do not call remote_check_symbols
if the target is not running.
(remote_detach_1): Rename from remote_detach. Take an EXTENDED
argument. Handle a non-running target.
(remote_detach): Use it.
(extended_remote_detach): New.
(remote_disconnect): Fix typo. Use remoute_mourn_1.
(extended_remote_attach_1, extended_remote_attach)
(extended_async_remote_attach): New.
(remote_vcont_resume): Remove unused variable.
(remote_wait, remote_async_wait): Use any cached wait status.
(putpkt_binary, getpkt): Clear any cached wait status.
(extended_remoute_mourn_1): New.
(extended_remote_mourn): Use it.
(extended_async_remote_mourn, extended_remote_run): New.
(extended_remote_create_inferior_1): New.
(extended_remote_create_inferior): Use it.
(extended_remote_async_create_inferior): Likewise.
(remote_xfer_partial): Skip for non-executing targets.
(init_extended_remote_ops): Set to_detach and to_attach.
(init_extended_async_remote_ops): Likewise. Use
extended_async_remote_mourn.
(_initialize_remote): Register vAttach, vRun, and
set remote exec-file.
* NEWS: Mention vAttach, vRun, and gdbserver extended-remote support.
* gdb.server/ext-attach.c, gdb.server/ext-attach.exp,
gdb.server/ext-run.exp: New files.
* lib/gdbserver-support.exp (gdbserver_download): New.
(gdbserver_start): New. Update gdbserver expected
output.
(gdbserver_spawn): Use them.
(gdbserver_start_extended): New.
* gdb.texinfo (Using the `gdbserver' Program): Add security
warning. Rearrange into subsections and subsubsections. Document
--multi and --debug. Correct --with-sysroot typo. Update --attach
usage. Make load reference clearer. Document monitor exit.
(Remote Configuration): Document set remote exec-file, attach-packet,
and run-packet.
(Packets): Document vAttach and vRun.
2008-01-30 00:51:50 +00:00
|
|
|
|
|
|
|
|
if { [skip_gdbserver_tests] } {
|
|
|
|
|
return 0
|
|
|
|
|
}
|
|
|
|
|
|
2015-01-09 11:04:19 +00:00
|
|
|
if {![can_spawn_for_attach]} {
|
* linux-low.c (linux_attach_lwp): Do not _exit after errors.
(linux_kill, linux_detach): Clean up the process list.
* remote-utils.c (remote_open): Improve port number parsing.
(putpkt_binary, input_interrupt): Only send interrupts if the target
is running.
* server.c (extended_protocol): Make static.
(attached): Define earlier.
(exit_requested, response_needed, program_argv): New variables.
(target_running): New.
(start_inferior): Clear attached here.
(attach_inferior): Set attached here.
(require_running): Define.
(handle_query): Use require_running and target_running. Implement
"monitor exit".
(handle_v_attach, handle_v_run): New.
(handle_v_requests): Use require_running. Handle vAttach and vRun.
(gdbserver_usage): Update.
(main): Redo argument parsing. Handle --debug and --multi. Handle
--attach along with other options or after the port. Save
program_argv. Support no initial program. Resynchronize
communication with GDB after an error. Handle "monitor exit".
Use require_running and target_running. Always allow the extended
protocol. Do not error out for Hc0 or Hc-1. Do not automatically
restart in extended mode.
* README: Refer to the GDB manual. Update --attach usage.
* remote.c (struct remote_state): Add cached_wait_status.
(remote_exec_file): New variable.
(PACKET_vAttach, PACKET_vRun): New constants.
(extended_remote_restart): Do not query for status.
(struct start_remote_args): New.
(remote_start_remote): Take it as a second argument. Check
whether the target is running. Issue an error for non-running
non-extended targets. Cache the wait status. Set inferior_ptid
here.
(remote_open_1): Prompt to disconnect non-running targets. Make
sure the target is marked running. Do not set inferior_ptid here.
Update call to remote_start_remote. Do not call remote_check_symbols
if the target is not running.
(remote_detach_1): Rename from remote_detach. Take an EXTENDED
argument. Handle a non-running target.
(remote_detach): Use it.
(extended_remote_detach): New.
(remote_disconnect): Fix typo. Use remoute_mourn_1.
(extended_remote_attach_1, extended_remote_attach)
(extended_async_remote_attach): New.
(remote_vcont_resume): Remove unused variable.
(remote_wait, remote_async_wait): Use any cached wait status.
(putpkt_binary, getpkt): Clear any cached wait status.
(extended_remoute_mourn_1): New.
(extended_remote_mourn): Use it.
(extended_async_remote_mourn, extended_remote_run): New.
(extended_remote_create_inferior_1): New.
(extended_remote_create_inferior): Use it.
(extended_remote_async_create_inferior): Likewise.
(remote_xfer_partial): Skip for non-executing targets.
(init_extended_remote_ops): Set to_detach and to_attach.
(init_extended_async_remote_ops): Likewise. Use
extended_async_remote_mourn.
(_initialize_remote): Register vAttach, vRun, and
set remote exec-file.
* NEWS: Mention vAttach, vRun, and gdbserver extended-remote support.
* gdb.server/ext-attach.c, gdb.server/ext-attach.exp,
gdb.server/ext-run.exp: New files.
* lib/gdbserver-support.exp (gdbserver_download): New.
(gdbserver_start): New. Update gdbserver expected
output.
(gdbserver_spawn): Use them.
(gdbserver_start_extended): New.
* gdb.texinfo (Using the `gdbserver' Program): Add security
warning. Rearrange into subsections and subsubsections. Document
--multi and --debug. Correct --with-sysroot typo. Update --attach
usage. Make load reference clearer. Document monitor exit.
(Remote Configuration): Document set remote exec-file, attach-packet,
and run-packet.
(Packets): Document vAttach and vRun.
2008-01-30 00:51:50 +00:00
|
|
|
return 0
|
|
|
|
|
}
|
|
|
|
|
|
2012-06-25 19:46:26 +00:00
|
|
|
if {[prepare_for_testing $testfile.exp $testfile $srcfile debug]} {
|
* linux-low.c (linux_attach_lwp): Do not _exit after errors.
(linux_kill, linux_detach): Clean up the process list.
* remote-utils.c (remote_open): Improve port number parsing.
(putpkt_binary, input_interrupt): Only send interrupts if the target
is running.
* server.c (extended_protocol): Make static.
(attached): Define earlier.
(exit_requested, response_needed, program_argv): New variables.
(target_running): New.
(start_inferior): Clear attached here.
(attach_inferior): Set attached here.
(require_running): Define.
(handle_query): Use require_running and target_running. Implement
"monitor exit".
(handle_v_attach, handle_v_run): New.
(handle_v_requests): Use require_running. Handle vAttach and vRun.
(gdbserver_usage): Update.
(main): Redo argument parsing. Handle --debug and --multi. Handle
--attach along with other options or after the port. Save
program_argv. Support no initial program. Resynchronize
communication with GDB after an error. Handle "monitor exit".
Use require_running and target_running. Always allow the extended
protocol. Do not error out for Hc0 or Hc-1. Do not automatically
restart in extended mode.
* README: Refer to the GDB manual. Update --attach usage.
* remote.c (struct remote_state): Add cached_wait_status.
(remote_exec_file): New variable.
(PACKET_vAttach, PACKET_vRun): New constants.
(extended_remote_restart): Do not query for status.
(struct start_remote_args): New.
(remote_start_remote): Take it as a second argument. Check
whether the target is running. Issue an error for non-running
non-extended targets. Cache the wait status. Set inferior_ptid
here.
(remote_open_1): Prompt to disconnect non-running targets. Make
sure the target is marked running. Do not set inferior_ptid here.
Update call to remote_start_remote. Do not call remote_check_symbols
if the target is not running.
(remote_detach_1): Rename from remote_detach. Take an EXTENDED
argument. Handle a non-running target.
(remote_detach): Use it.
(extended_remote_detach): New.
(remote_disconnect): Fix typo. Use remoute_mourn_1.
(extended_remote_attach_1, extended_remote_attach)
(extended_async_remote_attach): New.
(remote_vcont_resume): Remove unused variable.
(remote_wait, remote_async_wait): Use any cached wait status.
(putpkt_binary, getpkt): Clear any cached wait status.
(extended_remoute_mourn_1): New.
(extended_remote_mourn): Use it.
(extended_async_remote_mourn, extended_remote_run): New.
(extended_remote_create_inferior_1): New.
(extended_remote_create_inferior): Use it.
(extended_remote_async_create_inferior): Likewise.
(remote_xfer_partial): Skip for non-executing targets.
(init_extended_remote_ops): Set to_detach and to_attach.
(init_extended_async_remote_ops): Likewise. Use
extended_async_remote_mourn.
(_initialize_remote): Register vAttach, vRun, and
set remote exec-file.
* NEWS: Mention vAttach, vRun, and gdbserver extended-remote support.
* gdb.server/ext-attach.c, gdb.server/ext-attach.exp,
gdb.server/ext-run.exp: New files.
* lib/gdbserver-support.exp (gdbserver_download): New.
(gdbserver_start): New. Update gdbserver expected
output.
(gdbserver_spawn): Use them.
(gdbserver_start_extended): New.
* gdb.texinfo (Using the `gdbserver' Program): Add security
warning. Rearrange into subsections and subsubsections. Document
--multi and --debug. Correct --with-sysroot typo. Update --attach
usage. Make load reference clearer. Document monitor exit.
(Remote Configuration): Document set remote exec-file, attach-packet,
and run-packet.
(Packets): Document vAttach and vRun.
2008-01-30 00:51:50 +00:00
|
|
|
return -1
|
|
|
|
|
}
|
|
|
|
|
|
2012-02-15 12:51:17 +00:00
|
|
|
# Make sure we're disconnected, in case we're testing with an
|
|
|
|
|
# extended-remote board, therefore already connected.
|
|
|
|
|
gdb_test "disconnect" ".*"
|
|
|
|
|
|
2010-01-12 00:50:26 +00:00
|
|
|
set target_exec [gdbserver_download_current_prog]
|
* linux-low.c (linux_attach_lwp): Do not _exit after errors.
(linux_kill, linux_detach): Clean up the process list.
* remote-utils.c (remote_open): Improve port number parsing.
(putpkt_binary, input_interrupt): Only send interrupts if the target
is running.
* server.c (extended_protocol): Make static.
(attached): Define earlier.
(exit_requested, response_needed, program_argv): New variables.
(target_running): New.
(start_inferior): Clear attached here.
(attach_inferior): Set attached here.
(require_running): Define.
(handle_query): Use require_running and target_running. Implement
"monitor exit".
(handle_v_attach, handle_v_run): New.
(handle_v_requests): Use require_running. Handle vAttach and vRun.
(gdbserver_usage): Update.
(main): Redo argument parsing. Handle --debug and --multi. Handle
--attach along with other options or after the port. Save
program_argv. Support no initial program. Resynchronize
communication with GDB after an error. Handle "monitor exit".
Use require_running and target_running. Always allow the extended
protocol. Do not error out for Hc0 or Hc-1. Do not automatically
restart in extended mode.
* README: Refer to the GDB manual. Update --attach usage.
* remote.c (struct remote_state): Add cached_wait_status.
(remote_exec_file): New variable.
(PACKET_vAttach, PACKET_vRun): New constants.
(extended_remote_restart): Do not query for status.
(struct start_remote_args): New.
(remote_start_remote): Take it as a second argument. Check
whether the target is running. Issue an error for non-running
non-extended targets. Cache the wait status. Set inferior_ptid
here.
(remote_open_1): Prompt to disconnect non-running targets. Make
sure the target is marked running. Do not set inferior_ptid here.
Update call to remote_start_remote. Do not call remote_check_symbols
if the target is not running.
(remote_detach_1): Rename from remote_detach. Take an EXTENDED
argument. Handle a non-running target.
(remote_detach): Use it.
(extended_remote_detach): New.
(remote_disconnect): Fix typo. Use remoute_mourn_1.
(extended_remote_attach_1, extended_remote_attach)
(extended_async_remote_attach): New.
(remote_vcont_resume): Remove unused variable.
(remote_wait, remote_async_wait): Use any cached wait status.
(putpkt_binary, getpkt): Clear any cached wait status.
(extended_remoute_mourn_1): New.
(extended_remote_mourn): Use it.
(extended_async_remote_mourn, extended_remote_run): New.
(extended_remote_create_inferior_1): New.
(extended_remote_create_inferior): Use it.
(extended_remote_async_create_inferior): Likewise.
(remote_xfer_partial): Skip for non-executing targets.
(init_extended_remote_ops): Set to_detach and to_attach.
(init_extended_async_remote_ops): Likewise. Use
extended_async_remote_mourn.
(_initialize_remote): Register vAttach, vRun, and
set remote exec-file.
* NEWS: Mention vAttach, vRun, and gdbserver extended-remote support.
* gdb.server/ext-attach.c, gdb.server/ext-attach.exp,
gdb.server/ext-run.exp: New files.
* lib/gdbserver-support.exp (gdbserver_download): New.
(gdbserver_start): New. Update gdbserver expected
output.
(gdbserver_spawn): Use them.
(gdbserver_start_extended): New.
* gdb.texinfo (Using the `gdbserver' Program): Add security
warning. Rearrange into subsections and subsubsections. Document
--multi and --debug. Correct --with-sysroot typo. Update --attach
usage. Make load reference clearer. Document monitor exit.
(Remote Configuration): Document set remote exec-file, attach-packet,
and run-packet.
(Packets): Document vAttach and vRun.
2008-01-30 00:51:50 +00:00
|
|
|
gdbserver_start_extended
|
|
|
|
|
|
2010-06-02 21:50:56 +00:00
|
|
|
gdb_test_no_output "set remote exec-file $target_exec" "set remote exec-file"
|
* linux-low.c (linux_attach_lwp): Do not _exit after errors.
(linux_kill, linux_detach): Clean up the process list.
* remote-utils.c (remote_open): Improve port number parsing.
(putpkt_binary, input_interrupt): Only send interrupts if the target
is running.
* server.c (extended_protocol): Make static.
(attached): Define earlier.
(exit_requested, response_needed, program_argv): New variables.
(target_running): New.
(start_inferior): Clear attached here.
(attach_inferior): Set attached here.
(require_running): Define.
(handle_query): Use require_running and target_running. Implement
"monitor exit".
(handle_v_attach, handle_v_run): New.
(handle_v_requests): Use require_running. Handle vAttach and vRun.
(gdbserver_usage): Update.
(main): Redo argument parsing. Handle --debug and --multi. Handle
--attach along with other options or after the port. Save
program_argv. Support no initial program. Resynchronize
communication with GDB after an error. Handle "monitor exit".
Use require_running and target_running. Always allow the extended
protocol. Do not error out for Hc0 or Hc-1. Do not automatically
restart in extended mode.
* README: Refer to the GDB manual. Update --attach usage.
* remote.c (struct remote_state): Add cached_wait_status.
(remote_exec_file): New variable.
(PACKET_vAttach, PACKET_vRun): New constants.
(extended_remote_restart): Do not query for status.
(struct start_remote_args): New.
(remote_start_remote): Take it as a second argument. Check
whether the target is running. Issue an error for non-running
non-extended targets. Cache the wait status. Set inferior_ptid
here.
(remote_open_1): Prompt to disconnect non-running targets. Make
sure the target is marked running. Do not set inferior_ptid here.
Update call to remote_start_remote. Do not call remote_check_symbols
if the target is not running.
(remote_detach_1): Rename from remote_detach. Take an EXTENDED
argument. Handle a non-running target.
(remote_detach): Use it.
(extended_remote_detach): New.
(remote_disconnect): Fix typo. Use remoute_mourn_1.
(extended_remote_attach_1, extended_remote_attach)
(extended_async_remote_attach): New.
(remote_vcont_resume): Remove unused variable.
(remote_wait, remote_async_wait): Use any cached wait status.
(putpkt_binary, getpkt): Clear any cached wait status.
(extended_remoute_mourn_1): New.
(extended_remote_mourn): Use it.
(extended_async_remote_mourn, extended_remote_run): New.
(extended_remote_create_inferior_1): New.
(extended_remote_create_inferior): Use it.
(extended_remote_async_create_inferior): Likewise.
(remote_xfer_partial): Skip for non-executing targets.
(init_extended_remote_ops): Set to_detach and to_attach.
(init_extended_async_remote_ops): Likewise. Use
extended_async_remote_mourn.
(_initialize_remote): Register vAttach, vRun, and
set remote exec-file.
* NEWS: Mention vAttach, vRun, and gdbserver extended-remote support.
* gdb.server/ext-attach.c, gdb.server/ext-attach.exp,
gdb.server/ext-run.exp: New files.
* lib/gdbserver-support.exp (gdbserver_download): New.
(gdbserver_start): New. Update gdbserver expected
output.
(gdbserver_spawn): Use them.
(gdbserver_start_extended): New.
* gdb.texinfo (Using the `gdbserver' Program): Add security
warning. Rearrange into subsections and subsubsections. Document
--multi and --debug. Correct --with-sysroot typo. Update --attach
usage. Make load reference clearer. Document monitor exit.
(Remote Configuration): Document set remote exec-file, attach-packet,
and run-packet.
(Packets): Document vAttach and vRun.
2008-01-30 00:51:50 +00:00
|
|
|
|
testsuite: tcl exec& -> 'kill -9 $pid' is racy (attach-many-short-lived-thread.exp races and others)
The buildbots show that attach-many-short-lived-thread.exp is racy.
But after staring at debug logs and playing with SystemTap scripts for
a (long) while, I figured out that neither GDB, nor the kernel nor the
test's program itself are at fault.
The problem is simply that the testsuite machinery is currently
subject to PID-reuse races. The attach-many-short-lived-threads.c
test program just happens to be much more susceptible to trigger this
race because threads and processes share the same number space on
Linux, and the test spawns many many short lived threads in
succession, thus enlarging the race window a lot.
Part of the problem is that several tests spawn processes with "exec&"
(in order to test the "attach" command) , and then at the end of the
test, to make sure things are cleaned up, issue a 'remote_spawn "kill
-p $testpid"'. Since with tcl's "exec&", tcl itself is responsible
for reaping the process's exit status, when we go kill the process,
testpid may have already exited _and_ its status may have (and often
has) been reaped already. Thus it can happen that another process
meanwhile reuses $testpid, and that "kill" command kills the wrong
process... Frequently, that happens to be
attach-many-short-lived-thread, but this explains other test's races
as well.
In the attach-many-short-lived-threads test, it sometimes manifests
like this:
(gdb) file /home/pedro/gdb/mygit/build/gdb/testsuite/gdb.threads/attach-many-short-lived-threads
Reading symbols from /home/pedro/gdb/mygit/build/gdb/testsuite/gdb.threads/attach-many-short-lived-threads...done.
(gdb) Loaded /home/pedro/gdb/mygit/build/gdb/testsuite/gdb.threads/attach-many-short-lived-threads into /home/pedro/gdb/mygit/build/gdb/testsuite/../../gdb/gdb
attach 5940
Attaching to program: /home/pedro/gdb/mygit/build/gdb/testsuite/gdb.threads/attach-many-short-lived-threads, process 5940
warning: process 5940 is a zombie - the process has already terminated
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
ptrace: Operation not permitted.
(gdb) PASS: gdb.threads/attach-many-short-lived-threads.exp: iter 1: attach
info threads
No threads.
(gdb) PASS: gdb.threads/attach-many-short-lived-threads.exp: iter 1: no new threads
set breakpoint always-inserted on
(gdb) PASS: gdb.threads/attach-many-short-lived-threads.exp: iter 1: set breakpoint always-inserted on
Other times the process dies while the test is ongoing (the process is
ptrace-stopped):
(gdb) print again = 1
Cannot access memory at address 0x6020cc
(gdb) FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: reset timer in the inferior
(Recall that on Linux, SIGKILL is not interceptable)
And other times it dies just while we're detaching:
$4 = 319
(gdb) PASS: gdb.threads/attach-many-short-lived-threads.exp: iter 2: print seconds_left
detach
Can't detach Thread 0x7fb13b7de700 (LWP 1842): No such process
(gdb) FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: detach
GDB mishandles the latter (it should ignore ESRCH while detaching just
like when continuing), but that's another story.
The fix here is to change spawn_wait_for_attach to use Expect's
'spawn' command instead of Tcl's 'exec&' to spawn programs, because
with spawn we control when to wait for/reap the process. That allows
killing the process by PID without being subject to pid-reuse races,
because even if the process is already dead, the kernel won't reuse
the process's PID until the zombie is reaped.
The other part of the problem lies in DejaGnu itself, unfortunately.
I have occasionally seen tests (attach-many-short-lived-threads
included, but not only that one) die with a random inexplicable
SIGTERM too, and that too is caused by the same reason, except that in
that case, the rogue SIGTERM is sent from this bit in DejaGnu's remote.exp:
exec sh -c "exec > /dev/null 2>&1 && (kill -2 $pgid || kill -2 $pid) && sleep 5 && (kill $pgid || kill $pid) && sleep 5 && (kill -9 $pgid || kill -9 $pid) &"
...
catch "wait -i $shell_id"
Even if the program exits promptly, that whole cascade of kills
carries on in the background, thus potentially killing the poor
process that manages to reuse $pid...
I sent a fix for that to the DejaGnu list:
http://lists.gnu.org/archive/html/dejagnu/2015-07/msg00000.html
With both patches in place, I haven't seen
attach-many-short-lived-threads.exp fail again.
Tested on x86_64 Fedora 20, native, gdbserver and extended-gdbserver.
gdb/testsuite/ChangeLog:
2015-07-31 Pedro Alves <palves@redhat.com>
* gdb.base/attach-pie-misread.exp: Rename $res to $test_spawn_id.
Use spawn_id_get_pid. Wait for spawn id after eof. Use
kill_wait_spawned_process instead of explicit "kill -9".
* gdb.base/attach-pie-noexec.exp: Adjust to spawn_wait_for_attach
returning a spawn id instead of a pid. Use spawn_id_get_pid and
kill_wait_spawned_process.
* gdb.base/attach-twice.exp: Likewise.
* gdb.base/attach.exp: Likewise.
(do_command_attach_tests): Use gdb_spawn_with_cmdline_opts and
gdb_test_multiple.
* gdb.base/solib-overlap.exp: Adjust to spawn_wait_for_attach
returning a spawn id instead of a pid. Use spawn_id_get_pid and
kill_wait_spawned_process.
* gdb.base/valgrind-infcall.exp: Likewise.
* gdb.multi/multi-attach.exp: Likewise.
* gdb.python/py-prompt.exp: Likewise.
* gdb.python/py-sync-interp.exp: Likewise.
* gdb.server/ext-attach.exp: Likewise.
* gdb.threads/attach-into-signal.exp (corefunc): Use
spawn_wait_for_attach, spawn_id_get_pid and
kill_wait_spawned_process.
* gdb.threads/attach-many-short-lived-threads.exp: Adjust to
spawn_wait_for_attach returning a spawn id instead of a pid. Use
spawn_id_get_pid and kill_wait_spawned_process.
* gdb.threads/attach-stopped.exp (corefunc): Use
spawn_wait_for_attach, spawn_id_get_pid and
kill_wait_spawned_process.
* gdb.base/break-interp.exp: Rename $res to $test_spawn_id.
Use spawn_id_get_pid. Wait for spawn id after eof. Use
kill_wait_spawned_process instead of explicit "kill -9".
* lib/gdb.exp (can_spawn_for_attach): Adjust comment.
(kill_wait_spawned_process, spawn_id_get_pid): New procedures.
(spawn_wait_for_attach): Use spawn instead of exec to spawn
processes. Don't map cygwin/windows pids here. Now returns a
spawn id list.
2015-07-31 19:06:24 +00:00
|
|
|
set test_spawn_id [spawn_wait_for_attach $binfile]
|
|
|
|
|
set testpid [spawn_id_get_pid $test_spawn_id]
|
* linux-low.c (linux_attach_lwp): Do not _exit after errors.
(linux_kill, linux_detach): Clean up the process list.
* remote-utils.c (remote_open): Improve port number parsing.
(putpkt_binary, input_interrupt): Only send interrupts if the target
is running.
* server.c (extended_protocol): Make static.
(attached): Define earlier.
(exit_requested, response_needed, program_argv): New variables.
(target_running): New.
(start_inferior): Clear attached here.
(attach_inferior): Set attached here.
(require_running): Define.
(handle_query): Use require_running and target_running. Implement
"monitor exit".
(handle_v_attach, handle_v_run): New.
(handle_v_requests): Use require_running. Handle vAttach and vRun.
(gdbserver_usage): Update.
(main): Redo argument parsing. Handle --debug and --multi. Handle
--attach along with other options or after the port. Save
program_argv. Support no initial program. Resynchronize
communication with GDB after an error. Handle "monitor exit".
Use require_running and target_running. Always allow the extended
protocol. Do not error out for Hc0 or Hc-1. Do not automatically
restart in extended mode.
* README: Refer to the GDB manual. Update --attach usage.
* remote.c (struct remote_state): Add cached_wait_status.
(remote_exec_file): New variable.
(PACKET_vAttach, PACKET_vRun): New constants.
(extended_remote_restart): Do not query for status.
(struct start_remote_args): New.
(remote_start_remote): Take it as a second argument. Check
whether the target is running. Issue an error for non-running
non-extended targets. Cache the wait status. Set inferior_ptid
here.
(remote_open_1): Prompt to disconnect non-running targets. Make
sure the target is marked running. Do not set inferior_ptid here.
Update call to remote_start_remote. Do not call remote_check_symbols
if the target is not running.
(remote_detach_1): Rename from remote_detach. Take an EXTENDED
argument. Handle a non-running target.
(remote_detach): Use it.
(extended_remote_detach): New.
(remote_disconnect): Fix typo. Use remoute_mourn_1.
(extended_remote_attach_1, extended_remote_attach)
(extended_async_remote_attach): New.
(remote_vcont_resume): Remove unused variable.
(remote_wait, remote_async_wait): Use any cached wait status.
(putpkt_binary, getpkt): Clear any cached wait status.
(extended_remoute_mourn_1): New.
(extended_remote_mourn): Use it.
(extended_async_remote_mourn, extended_remote_run): New.
(extended_remote_create_inferior_1): New.
(extended_remote_create_inferior): Use it.
(extended_remote_async_create_inferior): Likewise.
(remote_xfer_partial): Skip for non-executing targets.
(init_extended_remote_ops): Set to_detach and to_attach.
(init_extended_async_remote_ops): Likewise. Use
extended_async_remote_mourn.
(_initialize_remote): Register vAttach, vRun, and
set remote exec-file.
* NEWS: Mention vAttach, vRun, and gdbserver extended-remote support.
* gdb.server/ext-attach.c, gdb.server/ext-attach.exp,
gdb.server/ext-run.exp: New files.
* lib/gdbserver-support.exp (gdbserver_download): New.
(gdbserver_start): New. Update gdbserver expected
output.
(gdbserver_spawn): Use them.
(gdbserver_start_extended): New.
* gdb.texinfo (Using the `gdbserver' Program): Add security
warning. Rearrange into subsections and subsubsections. Document
--multi and --debug. Correct --with-sysroot typo. Update --attach
usage. Make load reference clearer. Document monitor exit.
(Remote Configuration): Document set remote exec-file, attach-packet,
and run-packet.
(Packets): Document vAttach and vRun.
2008-01-30 00:51:50 +00:00
|
|
|
|
2012-02-15 12:48:55 +00:00
|
|
|
gdb_test "attach $testpid" \
|
|
|
|
|
"Attaching to program: .*, process $testpid.*(in|at).*" \
|
* linux-low.c (linux_attach_lwp): Do not _exit after errors.
(linux_kill, linux_detach): Clean up the process list.
* remote-utils.c (remote_open): Improve port number parsing.
(putpkt_binary, input_interrupt): Only send interrupts if the target
is running.
* server.c (extended_protocol): Make static.
(attached): Define earlier.
(exit_requested, response_needed, program_argv): New variables.
(target_running): New.
(start_inferior): Clear attached here.
(attach_inferior): Set attached here.
(require_running): Define.
(handle_query): Use require_running and target_running. Implement
"monitor exit".
(handle_v_attach, handle_v_run): New.
(handle_v_requests): Use require_running. Handle vAttach and vRun.
(gdbserver_usage): Update.
(main): Redo argument parsing. Handle --debug and --multi. Handle
--attach along with other options or after the port. Save
program_argv. Support no initial program. Resynchronize
communication with GDB after an error. Handle "monitor exit".
Use require_running and target_running. Always allow the extended
protocol. Do not error out for Hc0 or Hc-1. Do not automatically
restart in extended mode.
* README: Refer to the GDB manual. Update --attach usage.
* remote.c (struct remote_state): Add cached_wait_status.
(remote_exec_file): New variable.
(PACKET_vAttach, PACKET_vRun): New constants.
(extended_remote_restart): Do not query for status.
(struct start_remote_args): New.
(remote_start_remote): Take it as a second argument. Check
whether the target is running. Issue an error for non-running
non-extended targets. Cache the wait status. Set inferior_ptid
here.
(remote_open_1): Prompt to disconnect non-running targets. Make
sure the target is marked running. Do not set inferior_ptid here.
Update call to remote_start_remote. Do not call remote_check_symbols
if the target is not running.
(remote_detach_1): Rename from remote_detach. Take an EXTENDED
argument. Handle a non-running target.
(remote_detach): Use it.
(extended_remote_detach): New.
(remote_disconnect): Fix typo. Use remoute_mourn_1.
(extended_remote_attach_1, extended_remote_attach)
(extended_async_remote_attach): New.
(remote_vcont_resume): Remove unused variable.
(remote_wait, remote_async_wait): Use any cached wait status.
(putpkt_binary, getpkt): Clear any cached wait status.
(extended_remoute_mourn_1): New.
(extended_remote_mourn): Use it.
(extended_async_remote_mourn, extended_remote_run): New.
(extended_remote_create_inferior_1): New.
(extended_remote_create_inferior): Use it.
(extended_remote_async_create_inferior): Likewise.
(remote_xfer_partial): Skip for non-executing targets.
(init_extended_remote_ops): Set to_detach and to_attach.
(init_extended_async_remote_ops): Likewise. Use
extended_async_remote_mourn.
(_initialize_remote): Register vAttach, vRun, and
set remote exec-file.
* NEWS: Mention vAttach, vRun, and gdbserver extended-remote support.
* gdb.server/ext-attach.c, gdb.server/ext-attach.exp,
gdb.server/ext-run.exp: New files.
* lib/gdbserver-support.exp (gdbserver_download): New.
(gdbserver_start): New. Update gdbserver expected
output.
(gdbserver_spawn): Use them.
(gdbserver_start_extended): New.
* gdb.texinfo (Using the `gdbserver' Program): Add security
warning. Rearrange into subsections and subsubsections. Document
--multi and --debug. Correct --with-sysroot typo. Update --attach
usage. Make load reference clearer. Document monitor exit.
(Remote Configuration): Document set remote exec-file, attach-packet,
and run-packet.
(Packets): Document vAttach and vRun.
2008-01-30 00:51:50 +00:00
|
|
|
"attach to remote program 1"
|
2013-06-25 13:01:28 +00:00
|
|
|
|
|
|
|
|
if { [gdb_target_supports_trace] } then {
|
|
|
|
|
# Test predefined TSVs are uploaded.
|
|
|
|
|
gdb_test_sequence "info tvariables" "check uploaded tsv" {
|
|
|
|
|
"\[\r\n\]+Name\[\t \]+Initial\[\t \]+Current"
|
|
|
|
|
"\[\r\n\]+\\\$trace_timestamp 0"
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
* linux-low.c (linux_attach_lwp): Do not _exit after errors.
(linux_kill, linux_detach): Clean up the process list.
* remote-utils.c (remote_open): Improve port number parsing.
(putpkt_binary, input_interrupt): Only send interrupts if the target
is running.
* server.c (extended_protocol): Make static.
(attached): Define earlier.
(exit_requested, response_needed, program_argv): New variables.
(target_running): New.
(start_inferior): Clear attached here.
(attach_inferior): Set attached here.
(require_running): Define.
(handle_query): Use require_running and target_running. Implement
"monitor exit".
(handle_v_attach, handle_v_run): New.
(handle_v_requests): Use require_running. Handle vAttach and vRun.
(gdbserver_usage): Update.
(main): Redo argument parsing. Handle --debug and --multi. Handle
--attach along with other options or after the port. Save
program_argv. Support no initial program. Resynchronize
communication with GDB after an error. Handle "monitor exit".
Use require_running and target_running. Always allow the extended
protocol. Do not error out for Hc0 or Hc-1. Do not automatically
restart in extended mode.
* README: Refer to the GDB manual. Update --attach usage.
* remote.c (struct remote_state): Add cached_wait_status.
(remote_exec_file): New variable.
(PACKET_vAttach, PACKET_vRun): New constants.
(extended_remote_restart): Do not query for status.
(struct start_remote_args): New.
(remote_start_remote): Take it as a second argument. Check
whether the target is running. Issue an error for non-running
non-extended targets. Cache the wait status. Set inferior_ptid
here.
(remote_open_1): Prompt to disconnect non-running targets. Make
sure the target is marked running. Do not set inferior_ptid here.
Update call to remote_start_remote. Do not call remote_check_symbols
if the target is not running.
(remote_detach_1): Rename from remote_detach. Take an EXTENDED
argument. Handle a non-running target.
(remote_detach): Use it.
(extended_remote_detach): New.
(remote_disconnect): Fix typo. Use remoute_mourn_1.
(extended_remote_attach_1, extended_remote_attach)
(extended_async_remote_attach): New.
(remote_vcont_resume): Remove unused variable.
(remote_wait, remote_async_wait): Use any cached wait status.
(putpkt_binary, getpkt): Clear any cached wait status.
(extended_remoute_mourn_1): New.
(extended_remote_mourn): Use it.
(extended_async_remote_mourn, extended_remote_run): New.
(extended_remote_create_inferior_1): New.
(extended_remote_create_inferior): Use it.
(extended_remote_async_create_inferior): Likewise.
(remote_xfer_partial): Skip for non-executing targets.
(init_extended_remote_ops): Set to_detach and to_attach.
(init_extended_async_remote_ops): Likewise. Use
extended_async_remote_mourn.
(_initialize_remote): Register vAttach, vRun, and
set remote exec-file.
* NEWS: Mention vAttach, vRun, and gdbserver extended-remote support.
* gdb.server/ext-attach.c, gdb.server/ext-attach.exp,
gdb.server/ext-run.exp: New files.
* lib/gdbserver-support.exp (gdbserver_download): New.
(gdbserver_start): New. Update gdbserver expected
output.
(gdbserver_spawn): Use them.
(gdbserver_start_extended): New.
* gdb.texinfo (Using the `gdbserver' Program): Add security
warning. Rearrange into subsections and subsubsections. Document
--multi and --debug. Correct --with-sysroot typo. Update --attach
usage. Make load reference clearer. Document monitor exit.
(Remote Configuration): Document set remote exec-file, attach-packet,
and run-packet.
(Packets): Document vAttach and vRun.
2008-01-30 00:51:50 +00:00
|
|
|
gdb_test "backtrace" ".*main.*" "backtrace 1"
|
|
|
|
|
|
2012-02-15 12:48:55 +00:00
|
|
|
gdb_test "detach" "Detaching from program.*process.*"
|
* linux-low.c (linux_attach_lwp): Do not _exit after errors.
(linux_kill, linux_detach): Clean up the process list.
* remote-utils.c (remote_open): Improve port number parsing.
(putpkt_binary, input_interrupt): Only send interrupts if the target
is running.
* server.c (extended_protocol): Make static.
(attached): Define earlier.
(exit_requested, response_needed, program_argv): New variables.
(target_running): New.
(start_inferior): Clear attached here.
(attach_inferior): Set attached here.
(require_running): Define.
(handle_query): Use require_running and target_running. Implement
"monitor exit".
(handle_v_attach, handle_v_run): New.
(handle_v_requests): Use require_running. Handle vAttach and vRun.
(gdbserver_usage): Update.
(main): Redo argument parsing. Handle --debug and --multi. Handle
--attach along with other options or after the port. Save
program_argv. Support no initial program. Resynchronize
communication with GDB after an error. Handle "monitor exit".
Use require_running and target_running. Always allow the extended
protocol. Do not error out for Hc0 or Hc-1. Do not automatically
restart in extended mode.
* README: Refer to the GDB manual. Update --attach usage.
* remote.c (struct remote_state): Add cached_wait_status.
(remote_exec_file): New variable.
(PACKET_vAttach, PACKET_vRun): New constants.
(extended_remote_restart): Do not query for status.
(struct start_remote_args): New.
(remote_start_remote): Take it as a second argument. Check
whether the target is running. Issue an error for non-running
non-extended targets. Cache the wait status. Set inferior_ptid
here.
(remote_open_1): Prompt to disconnect non-running targets. Make
sure the target is marked running. Do not set inferior_ptid here.
Update call to remote_start_remote. Do not call remote_check_symbols
if the target is not running.
(remote_detach_1): Rename from remote_detach. Take an EXTENDED
argument. Handle a non-running target.
(remote_detach): Use it.
(extended_remote_detach): New.
(remote_disconnect): Fix typo. Use remoute_mourn_1.
(extended_remote_attach_1, extended_remote_attach)
(extended_async_remote_attach): New.
(remote_vcont_resume): Remove unused variable.
(remote_wait, remote_async_wait): Use any cached wait status.
(putpkt_binary, getpkt): Clear any cached wait status.
(extended_remoute_mourn_1): New.
(extended_remote_mourn): Use it.
(extended_async_remote_mourn, extended_remote_run): New.
(extended_remote_create_inferior_1): New.
(extended_remote_create_inferior): Use it.
(extended_remote_async_create_inferior): Likewise.
(remote_xfer_partial): Skip for non-executing targets.
(init_extended_remote_ops): Set to_detach and to_attach.
(init_extended_async_remote_ops): Likewise. Use
extended_async_remote_mourn.
(_initialize_remote): Register vAttach, vRun, and
set remote exec-file.
* NEWS: Mention vAttach, vRun, and gdbserver extended-remote support.
* gdb.server/ext-attach.c, gdb.server/ext-attach.exp,
gdb.server/ext-run.exp: New files.
* lib/gdbserver-support.exp (gdbserver_download): New.
(gdbserver_start): New. Update gdbserver expected
output.
(gdbserver_spawn): Use them.
(gdbserver_start_extended): New.
* gdb.texinfo (Using the `gdbserver' Program): Add security
warning. Rearrange into subsections and subsubsections. Document
--multi and --debug. Correct --with-sysroot typo. Update --attach
usage. Make load reference clearer. Document monitor exit.
(Remote Configuration): Document set remote exec-file, attach-packet,
and run-packet.
(Packets): Document vAttach and vRun.
2008-01-30 00:51:50 +00:00
|
|
|
gdb_test "backtrace" "No stack\\." "backtrace with no program"
|
|
|
|
|
|
2012-02-15 12:48:55 +00:00
|
|
|
gdb_test "attach $testpid" \
|
|
|
|
|
"Attaching to program: .*, process $testpid.*(in|at).*" \
|
* linux-low.c (linux_attach_lwp): Do not _exit after errors.
(linux_kill, linux_detach): Clean up the process list.
* remote-utils.c (remote_open): Improve port number parsing.
(putpkt_binary, input_interrupt): Only send interrupts if the target
is running.
* server.c (extended_protocol): Make static.
(attached): Define earlier.
(exit_requested, response_needed, program_argv): New variables.
(target_running): New.
(start_inferior): Clear attached here.
(attach_inferior): Set attached here.
(require_running): Define.
(handle_query): Use require_running and target_running. Implement
"monitor exit".
(handle_v_attach, handle_v_run): New.
(handle_v_requests): Use require_running. Handle vAttach and vRun.
(gdbserver_usage): Update.
(main): Redo argument parsing. Handle --debug and --multi. Handle
--attach along with other options or after the port. Save
program_argv. Support no initial program. Resynchronize
communication with GDB after an error. Handle "monitor exit".
Use require_running and target_running. Always allow the extended
protocol. Do not error out for Hc0 or Hc-1. Do not automatically
restart in extended mode.
* README: Refer to the GDB manual. Update --attach usage.
* remote.c (struct remote_state): Add cached_wait_status.
(remote_exec_file): New variable.
(PACKET_vAttach, PACKET_vRun): New constants.
(extended_remote_restart): Do not query for status.
(struct start_remote_args): New.
(remote_start_remote): Take it as a second argument. Check
whether the target is running. Issue an error for non-running
non-extended targets. Cache the wait status. Set inferior_ptid
here.
(remote_open_1): Prompt to disconnect non-running targets. Make
sure the target is marked running. Do not set inferior_ptid here.
Update call to remote_start_remote. Do not call remote_check_symbols
if the target is not running.
(remote_detach_1): Rename from remote_detach. Take an EXTENDED
argument. Handle a non-running target.
(remote_detach): Use it.
(extended_remote_detach): New.
(remote_disconnect): Fix typo. Use remoute_mourn_1.
(extended_remote_attach_1, extended_remote_attach)
(extended_async_remote_attach): New.
(remote_vcont_resume): Remove unused variable.
(remote_wait, remote_async_wait): Use any cached wait status.
(putpkt_binary, getpkt): Clear any cached wait status.
(extended_remoute_mourn_1): New.
(extended_remote_mourn): Use it.
(extended_async_remote_mourn, extended_remote_run): New.
(extended_remote_create_inferior_1): New.
(extended_remote_create_inferior): Use it.
(extended_remote_async_create_inferior): Likewise.
(remote_xfer_partial): Skip for non-executing targets.
(init_extended_remote_ops): Set to_detach and to_attach.
(init_extended_async_remote_ops): Likewise. Use
extended_async_remote_mourn.
(_initialize_remote): Register vAttach, vRun, and
set remote exec-file.
* NEWS: Mention vAttach, vRun, and gdbserver extended-remote support.
* gdb.server/ext-attach.c, gdb.server/ext-attach.exp,
gdb.server/ext-run.exp: New files.
* lib/gdbserver-support.exp (gdbserver_download): New.
(gdbserver_start): New. Update gdbserver expected
output.
(gdbserver_spawn): Use them.
(gdbserver_start_extended): New.
* gdb.texinfo (Using the `gdbserver' Program): Add security
warning. Rearrange into subsections and subsubsections. Document
--multi and --debug. Correct --with-sysroot typo. Update --attach
usage. Make load reference clearer. Document monitor exit.
(Remote Configuration): Document set remote exec-file, attach-packet,
and run-packet.
(Packets): Document vAttach and vRun.
2008-01-30 00:51:50 +00:00
|
|
|
"attach to remote program 2"
|
|
|
|
|
gdb_test "backtrace" ".*main.*" "backtrace 2"
|
|
|
|
|
|
|
|
|
|
gdb_test "kill" "" "kill" "Kill the program being debugged.*" "y"
|
2010-06-10 19:48:20 +00:00
|
|
|
gdb_test_no_output "monitor exit"
|
testsuite: tcl exec& -> 'kill -9 $pid' is racy (attach-many-short-lived-thread.exp races and others)
The buildbots show that attach-many-short-lived-thread.exp is racy.
But after staring at debug logs and playing with SystemTap scripts for
a (long) while, I figured out that neither GDB, nor the kernel nor the
test's program itself are at fault.
The problem is simply that the testsuite machinery is currently
subject to PID-reuse races. The attach-many-short-lived-threads.c
test program just happens to be much more susceptible to trigger this
race because threads and processes share the same number space on
Linux, and the test spawns many many short lived threads in
succession, thus enlarging the race window a lot.
Part of the problem is that several tests spawn processes with "exec&"
(in order to test the "attach" command) , and then at the end of the
test, to make sure things are cleaned up, issue a 'remote_spawn "kill
-p $testpid"'. Since with tcl's "exec&", tcl itself is responsible
for reaping the process's exit status, when we go kill the process,
testpid may have already exited _and_ its status may have (and often
has) been reaped already. Thus it can happen that another process
meanwhile reuses $testpid, and that "kill" command kills the wrong
process... Frequently, that happens to be
attach-many-short-lived-thread, but this explains other test's races
as well.
In the attach-many-short-lived-threads test, it sometimes manifests
like this:
(gdb) file /home/pedro/gdb/mygit/build/gdb/testsuite/gdb.threads/attach-many-short-lived-threads
Reading symbols from /home/pedro/gdb/mygit/build/gdb/testsuite/gdb.threads/attach-many-short-lived-threads...done.
(gdb) Loaded /home/pedro/gdb/mygit/build/gdb/testsuite/gdb.threads/attach-many-short-lived-threads into /home/pedro/gdb/mygit/build/gdb/testsuite/../../gdb/gdb
attach 5940
Attaching to program: /home/pedro/gdb/mygit/build/gdb/testsuite/gdb.threads/attach-many-short-lived-threads, process 5940
warning: process 5940 is a zombie - the process has already terminated
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
ptrace: Operation not permitted.
(gdb) PASS: gdb.threads/attach-many-short-lived-threads.exp: iter 1: attach
info threads
No threads.
(gdb) PASS: gdb.threads/attach-many-short-lived-threads.exp: iter 1: no new threads
set breakpoint always-inserted on
(gdb) PASS: gdb.threads/attach-many-short-lived-threads.exp: iter 1: set breakpoint always-inserted on
Other times the process dies while the test is ongoing (the process is
ptrace-stopped):
(gdb) print again = 1
Cannot access memory at address 0x6020cc
(gdb) FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: reset timer in the inferior
(Recall that on Linux, SIGKILL is not interceptable)
And other times it dies just while we're detaching:
$4 = 319
(gdb) PASS: gdb.threads/attach-many-short-lived-threads.exp: iter 2: print seconds_left
detach
Can't detach Thread 0x7fb13b7de700 (LWP 1842): No such process
(gdb) FAIL: gdb.threads/attach-many-short-lived-threads.exp: iter 2: detach
GDB mishandles the latter (it should ignore ESRCH while detaching just
like when continuing), but that's another story.
The fix here is to change spawn_wait_for_attach to use Expect's
'spawn' command instead of Tcl's 'exec&' to spawn programs, because
with spawn we control when to wait for/reap the process. That allows
killing the process by PID without being subject to pid-reuse races,
because even if the process is already dead, the kernel won't reuse
the process's PID until the zombie is reaped.
The other part of the problem lies in DejaGnu itself, unfortunately.
I have occasionally seen tests (attach-many-short-lived-threads
included, but not only that one) die with a random inexplicable
SIGTERM too, and that too is caused by the same reason, except that in
that case, the rogue SIGTERM is sent from this bit in DejaGnu's remote.exp:
exec sh -c "exec > /dev/null 2>&1 && (kill -2 $pgid || kill -2 $pid) && sleep 5 && (kill $pgid || kill $pid) && sleep 5 && (kill -9 $pgid || kill -9 $pid) &"
...
catch "wait -i $shell_id"
Even if the program exits promptly, that whole cascade of kills
carries on in the background, thus potentially killing the poor
process that manages to reuse $pid...
I sent a fix for that to the DejaGnu list:
http://lists.gnu.org/archive/html/dejagnu/2015-07/msg00000.html
With both patches in place, I haven't seen
attach-many-short-lived-threads.exp fail again.
Tested on x86_64 Fedora 20, native, gdbserver and extended-gdbserver.
gdb/testsuite/ChangeLog:
2015-07-31 Pedro Alves <palves@redhat.com>
* gdb.base/attach-pie-misread.exp: Rename $res to $test_spawn_id.
Use spawn_id_get_pid. Wait for spawn id after eof. Use
kill_wait_spawned_process instead of explicit "kill -9".
* gdb.base/attach-pie-noexec.exp: Adjust to spawn_wait_for_attach
returning a spawn id instead of a pid. Use spawn_id_get_pid and
kill_wait_spawned_process.
* gdb.base/attach-twice.exp: Likewise.
* gdb.base/attach.exp: Likewise.
(do_command_attach_tests): Use gdb_spawn_with_cmdline_opts and
gdb_test_multiple.
* gdb.base/solib-overlap.exp: Adjust to spawn_wait_for_attach
returning a spawn id instead of a pid. Use spawn_id_get_pid and
kill_wait_spawned_process.
* gdb.base/valgrind-infcall.exp: Likewise.
* gdb.multi/multi-attach.exp: Likewise.
* gdb.python/py-prompt.exp: Likewise.
* gdb.python/py-sync-interp.exp: Likewise.
* gdb.server/ext-attach.exp: Likewise.
* gdb.threads/attach-into-signal.exp (corefunc): Use
spawn_wait_for_attach, spawn_id_get_pid and
kill_wait_spawned_process.
* gdb.threads/attach-many-short-lived-threads.exp: Adjust to
spawn_wait_for_attach returning a spawn id instead of a pid. Use
spawn_id_get_pid and kill_wait_spawned_process.
* gdb.threads/attach-stopped.exp (corefunc): Use
spawn_wait_for_attach, spawn_id_get_pid and
kill_wait_spawned_process.
* gdb.base/break-interp.exp: Rename $res to $test_spawn_id.
Use spawn_id_get_pid. Wait for spawn id after eof. Use
kill_wait_spawned_process instead of explicit "kill -9".
* lib/gdb.exp (can_spawn_for_attach): Adjust comment.
(kill_wait_spawned_process, spawn_id_get_pid): New procedures.
(spawn_wait_for_attach): Use spawn instead of exec to spawn
processes. Don't map cygwin/windows pids here. Now returns a
spawn id list.
2015-07-31 19:06:24 +00:00
|
|
|
|
|
|
|
|
kill_wait_spawned_process $test_spawn_id
|
