old-cross-binutils/gdb/testsuite/gdb.server/ext-attach.exp

73 lines
2.2 KiB
Text
Raw Normal View History

* linux-low.c (linux_attach_lwp): Do not _exit after errors. (linux_kill, linux_detach): Clean up the process list. * remote-utils.c (remote_open): Improve port number parsing. (putpkt_binary, input_interrupt): Only send interrupts if the target is running. * server.c (extended_protocol): Make static. (attached): Define earlier. (exit_requested, response_needed, program_argv): New variables. (target_running): New. (start_inferior): Clear attached here. (attach_inferior): Set attached here. (require_running): Define. (handle_query): Use require_running and target_running. Implement "monitor exit". (handle_v_attach, handle_v_run): New. (handle_v_requests): Use require_running. Handle vAttach and vRun. (gdbserver_usage): Update. (main): Redo argument parsing. Handle --debug and --multi. Handle --attach along with other options or after the port. Save program_argv. Support no initial program. Resynchronize communication with GDB after an error. Handle "monitor exit". Use require_running and target_running. Always allow the extended protocol. Do not error out for Hc0 or Hc-1. Do not automatically restart in extended mode. * README: Refer to the GDB manual. Update --attach usage. * remote.c (struct remote_state): Add cached_wait_status. (remote_exec_file): New variable. (PACKET_vAttach, PACKET_vRun): New constants. (extended_remote_restart): Do not query for status. (struct start_remote_args): New. (remote_start_remote): Take it as a second argument. Check whether the target is running. Issue an error for non-running non-extended targets. Cache the wait status. Set inferior_ptid here. (remote_open_1): Prompt to disconnect non-running targets. Make sure the target is marked running. Do not set inferior_ptid here. Update call to remote_start_remote. Do not call remote_check_symbols if the target is not running. (remote_detach_1): Rename from remote_detach. Take an EXTENDED argument. Handle a non-running target. (remote_detach): Use it. (extended_remote_detach): New. (remote_disconnect): Fix typo. Use remoute_mourn_1. (extended_remote_attach_1, extended_remote_attach) (extended_async_remote_attach): New. (remote_vcont_resume): Remove unused variable. (remote_wait, remote_async_wait): Use any cached wait status. (putpkt_binary, getpkt): Clear any cached wait status. (extended_remoute_mourn_1): New. (extended_remote_mourn): Use it. (extended_async_remote_mourn, extended_remote_run): New. (extended_remote_create_inferior_1): New. (extended_remote_create_inferior): Use it. (extended_remote_async_create_inferior): Likewise. (remote_xfer_partial): Skip for non-executing targets. (init_extended_remote_ops): Set to_detach and to_attach. (init_extended_async_remote_ops): Likewise. Use extended_async_remote_mourn. (_initialize_remote): Register vAttach, vRun, and set remote exec-file. * NEWS: Mention vAttach, vRun, and gdbserver extended-remote support. * gdb.server/ext-attach.c, gdb.server/ext-attach.exp, gdb.server/ext-run.exp: New files. * lib/gdbserver-support.exp (gdbserver_download): New. (gdbserver_start): New. Update gdbserver expected output. (gdbserver_spawn): Use them. (gdbserver_start_extended): New. * gdb.texinfo (Using the `gdbserver' Program): Add security warning. Rearrange into subsections and subsubsections. Document --multi and --debug. Correct --with-sysroot typo. Update --attach usage. Make load reference clearer. Document monitor exit. (Remote Configuration): Document set remote exec-file, attach-packet, and run-packet. (Packets): Document vAttach and vRun.
2008-01-30 00:51:50 +00:00
# This testcase is part of GDB, the GNU debugger.
# Copyright 2007-2015 Free Software Foundation, Inc.
* linux-low.c (linux_attach_lwp): Do not _exit after errors. (linux_kill, linux_detach): Clean up the process list. * remote-utils.c (remote_open): Improve port number parsing. (putpkt_binary, input_interrupt): Only send interrupts if the target is running. * server.c (extended_protocol): Make static. (attached): Define earlier. (exit_requested, response_needed, program_argv): New variables. (target_running): New. (start_inferior): Clear attached here. (attach_inferior): Set attached here. (require_running): Define. (handle_query): Use require_running and target_running. Implement "monitor exit". (handle_v_attach, handle_v_run): New. (handle_v_requests): Use require_running. Handle vAttach and vRun. (gdbserver_usage): Update. (main): Redo argument parsing. Handle --debug and --multi. Handle --attach along with other options or after the port. Save program_argv. Support no initial program. Resynchronize communication with GDB after an error. Handle "monitor exit". Use require_running and target_running. Always allow the extended protocol. Do not error out for Hc0 or Hc-1. Do not automatically restart in extended mode. * README: Refer to the GDB manual. Update --attach usage. * remote.c (struct remote_state): Add cached_wait_status. (remote_exec_file): New variable. (PACKET_vAttach, PACKET_vRun): New constants. (extended_remote_restart): Do not query for status. (struct start_remote_args): New. (remote_start_remote): Take it as a second argument. Check whether the target is running. Issue an error for non-running non-extended targets. Cache the wait status. Set inferior_ptid here. (remote_open_1): Prompt to disconnect non-running targets. Make sure the target is marked running. Do not set inferior_ptid here. Update call to remote_start_remote. Do not call remote_check_symbols if the target is not running. (remote_detach_1): Rename from remote_detach. Take an EXTENDED argument. Handle a non-running target. (remote_detach): Use it. (extended_remote_detach): New. (remote_disconnect): Fix typo. Use remoute_mourn_1. (extended_remote_attach_1, extended_remote_attach) (extended_async_remote_attach): New. (remote_vcont_resume): Remove unused variable. (remote_wait, remote_async_wait): Use any cached wait status. (putpkt_binary, getpkt): Clear any cached wait status. (extended_remoute_mourn_1): New. (extended_remote_mourn): Use it. (extended_async_remote_mourn, extended_remote_run): New. (extended_remote_create_inferior_1): New. (extended_remote_create_inferior): Use it. (extended_remote_async_create_inferior): Likewise. (remote_xfer_partial): Skip for non-executing targets. (init_extended_remote_ops): Set to_detach and to_attach. (init_extended_async_remote_ops): Likewise. Use extended_async_remote_mourn. (_initialize_remote): Register vAttach, vRun, and set remote exec-file. * NEWS: Mention vAttach, vRun, and gdbserver extended-remote support. * gdb.server/ext-attach.c, gdb.server/ext-attach.exp, gdb.server/ext-run.exp: New files. * lib/gdbserver-support.exp (gdbserver_download): New. (gdbserver_start): New. Update gdbserver expected output. (gdbserver_spawn): Use them. (gdbserver_start_extended): New. * gdb.texinfo (Using the `gdbserver' Program): Add security warning. Rearrange into subsections and subsubsections. Document --multi and --debug. Correct --with-sysroot typo. Update --attach usage. Make load reference clearer. Document monitor exit. (Remote Configuration): Document set remote exec-file, attach-packet, and run-packet. (Packets): Document vAttach and vRun.
2008-01-30 00:51:50 +00:00
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
# Test attaching to already-running programs using extended-remote.
load_lib gdbserver-support.exp
load_lib trace-support.exp
* linux-low.c (linux_attach_lwp): Do not _exit after errors. (linux_kill, linux_detach): Clean up the process list. * remote-utils.c (remote_open): Improve port number parsing. (putpkt_binary, input_interrupt): Only send interrupts if the target is running. * server.c (extended_protocol): Make static. (attached): Define earlier. (exit_requested, response_needed, program_argv): New variables. (target_running): New. (start_inferior): Clear attached here. (attach_inferior): Set attached here. (require_running): Define. (handle_query): Use require_running and target_running. Implement "monitor exit". (handle_v_attach, handle_v_run): New. (handle_v_requests): Use require_running. Handle vAttach and vRun. (gdbserver_usage): Update. (main): Redo argument parsing. Handle --debug and --multi. Handle --attach along with other options or after the port. Save program_argv. Support no initial program. Resynchronize communication with GDB after an error. Handle "monitor exit". Use require_running and target_running. Always allow the extended protocol. Do not error out for Hc0 or Hc-1. Do not automatically restart in extended mode. * README: Refer to the GDB manual. Update --attach usage. * remote.c (struct remote_state): Add cached_wait_status. (remote_exec_file): New variable. (PACKET_vAttach, PACKET_vRun): New constants. (extended_remote_restart): Do not query for status. (struct start_remote_args): New. (remote_start_remote): Take it as a second argument. Check whether the target is running. Issue an error for non-running non-extended targets. Cache the wait status. Set inferior_ptid here. (remote_open_1): Prompt to disconnect non-running targets. Make sure the target is marked running. Do not set inferior_ptid here. Update call to remote_start_remote. Do not call remote_check_symbols if the target is not running. (remote_detach_1): Rename from remote_detach. Take an EXTENDED argument. Handle a non-running target. (remote_detach): Use it. (extended_remote_detach): New. (remote_disconnect): Fix typo. Use remoute_mourn_1. (extended_remote_attach_1, extended_remote_attach) (extended_async_remote_attach): New. (remote_vcont_resume): Remove unused variable. (remote_wait, remote_async_wait): Use any cached wait status. (putpkt_binary, getpkt): Clear any cached wait status. (extended_remoute_mourn_1): New. (extended_remote_mourn): Use it. (extended_async_remote_mourn, extended_remote_run): New. (extended_remote_create_inferior_1): New. (extended_remote_create_inferior): Use it. (extended_remote_async_create_inferior): Likewise. (remote_xfer_partial): Skip for non-executing targets. (init_extended_remote_ops): Set to_detach and to_attach. (init_extended_async_remote_ops): Likewise. Use extended_async_remote_mourn. (_initialize_remote): Register vAttach, vRun, and set remote exec-file. * NEWS: Mention vAttach, vRun, and gdbserver extended-remote support. * gdb.server/ext-attach.c, gdb.server/ext-attach.exp, gdb.server/ext-run.exp: New files. * lib/gdbserver-support.exp (gdbserver_download): New. (gdbserver_start): New. Update gdbserver expected output. (gdbserver_spawn): Use them. (gdbserver_start_extended): New. * gdb.texinfo (Using the `gdbserver' Program): Add security warning. Rearrange into subsections and subsubsections. Document --multi and --debug. Correct --with-sysroot typo. Update --attach usage. Make load reference clearer. Document monitor exit. (Remote Configuration): Document set remote exec-file, attach-packet, and run-packet. (Packets): Document vAttach and vRun.
2008-01-30 00:51:50 +00:00
standard_testfile
* linux-low.c (linux_attach_lwp): Do not _exit after errors. (linux_kill, linux_detach): Clean up the process list. * remote-utils.c (remote_open): Improve port number parsing. (putpkt_binary, input_interrupt): Only send interrupts if the target is running. * server.c (extended_protocol): Make static. (attached): Define earlier. (exit_requested, response_needed, program_argv): New variables. (target_running): New. (start_inferior): Clear attached here. (attach_inferior): Set attached here. (require_running): Define. (handle_query): Use require_running and target_running. Implement "monitor exit". (handle_v_attach, handle_v_run): New. (handle_v_requests): Use require_running. Handle vAttach and vRun. (gdbserver_usage): Update. (main): Redo argument parsing. Handle --debug and --multi. Handle --attach along with other options or after the port. Save program_argv. Support no initial program. Resynchronize communication with GDB after an error. Handle "monitor exit". Use require_running and target_running. Always allow the extended protocol. Do not error out for Hc0 or Hc-1. Do not automatically restart in extended mode. * README: Refer to the GDB manual. Update --attach usage. * remote.c (struct remote_state): Add cached_wait_status. (remote_exec_file): New variable. (PACKET_vAttach, PACKET_vRun): New constants. (extended_remote_restart): Do not query for status. (struct start_remote_args): New. (remote_start_remote): Take it as a second argument. Check whether the target is running. Issue an error for non-running non-extended targets. Cache the wait status. Set inferior_ptid here. (remote_open_1): Prompt to disconnect non-running targets. Make sure the target is marked running. Do not set inferior_ptid here. Update call to remote_start_remote. Do not call remote_check_symbols if the target is not running. (remote_detach_1): Rename from remote_detach. Take an EXTENDED argument. Handle a non-running target. (remote_detach): Use it. (extended_remote_detach): New. (remote_disconnect): Fix typo. Use remoute_mourn_1. (extended_remote_attach_1, extended_remote_attach) (extended_async_remote_attach): New. (remote_vcont_resume): Remove unused variable. (remote_wait, remote_async_wait): Use any cached wait status. (putpkt_binary, getpkt): Clear any cached wait status. (extended_remoute_mourn_1): New. (extended_remote_mourn): Use it. (extended_async_remote_mourn, extended_remote_run): New. (extended_remote_create_inferior_1): New. (extended_remote_create_inferior): Use it. (extended_remote_async_create_inferior): Likewise. (remote_xfer_partial): Skip for non-executing targets. (init_extended_remote_ops): Set to_detach and to_attach. (init_extended_async_remote_ops): Likewise. Use extended_async_remote_mourn. (_initialize_remote): Register vAttach, vRun, and set remote exec-file. * NEWS: Mention vAttach, vRun, and gdbserver extended-remote support. * gdb.server/ext-attach.c, gdb.server/ext-attach.exp, gdb.server/ext-run.exp: New files. * lib/gdbserver-support.exp (gdbserver_download): New. (gdbserver_start): New. Update gdbserver expected output. (gdbserver_spawn): Use them. (gdbserver_start_extended): New. * gdb.texinfo (Using the `gdbserver' Program): Add security warning. Rearrange into subsections and subsubsections. Document --multi and --debug. Correct --with-sysroot typo. Update --attach usage. Make load reference clearer. Document monitor exit. (Remote Configuration): Document set remote exec-file, attach-packet, and run-packet. (Packets): Document vAttach and vRun.
2008-01-30 00:51:50 +00:00
if { [skip_gdbserver_tests] } {
return 0
}
# We need to use TCL's exec to get the pid.
if [is_remote target] then {
return 0
}
if {[prepare_for_testing $testfile.exp $testfile $srcfile debug]} {
* linux-low.c (linux_attach_lwp): Do not _exit after errors. (linux_kill, linux_detach): Clean up the process list. * remote-utils.c (remote_open): Improve port number parsing. (putpkt_binary, input_interrupt): Only send interrupts if the target is running. * server.c (extended_protocol): Make static. (attached): Define earlier. (exit_requested, response_needed, program_argv): New variables. (target_running): New. (start_inferior): Clear attached here. (attach_inferior): Set attached here. (require_running): Define. (handle_query): Use require_running and target_running. Implement "monitor exit". (handle_v_attach, handle_v_run): New. (handle_v_requests): Use require_running. Handle vAttach and vRun. (gdbserver_usage): Update. (main): Redo argument parsing. Handle --debug and --multi. Handle --attach along with other options or after the port. Save program_argv. Support no initial program. Resynchronize communication with GDB after an error. Handle "monitor exit". Use require_running and target_running. Always allow the extended protocol. Do not error out for Hc0 or Hc-1. Do not automatically restart in extended mode. * README: Refer to the GDB manual. Update --attach usage. * remote.c (struct remote_state): Add cached_wait_status. (remote_exec_file): New variable. (PACKET_vAttach, PACKET_vRun): New constants. (extended_remote_restart): Do not query for status. (struct start_remote_args): New. (remote_start_remote): Take it as a second argument. Check whether the target is running. Issue an error for non-running non-extended targets. Cache the wait status. Set inferior_ptid here. (remote_open_1): Prompt to disconnect non-running targets. Make sure the target is marked running. Do not set inferior_ptid here. Update call to remote_start_remote. Do not call remote_check_symbols if the target is not running. (remote_detach_1): Rename from remote_detach. Take an EXTENDED argument. Handle a non-running target. (remote_detach): Use it. (extended_remote_detach): New. (remote_disconnect): Fix typo. Use remoute_mourn_1. (extended_remote_attach_1, extended_remote_attach) (extended_async_remote_attach): New. (remote_vcont_resume): Remove unused variable. (remote_wait, remote_async_wait): Use any cached wait status. (putpkt_binary, getpkt): Clear any cached wait status. (extended_remoute_mourn_1): New. (extended_remote_mourn): Use it. (extended_async_remote_mourn, extended_remote_run): New. (extended_remote_create_inferior_1): New. (extended_remote_create_inferior): Use it. (extended_remote_async_create_inferior): Likewise. (remote_xfer_partial): Skip for non-executing targets. (init_extended_remote_ops): Set to_detach and to_attach. (init_extended_async_remote_ops): Likewise. Use extended_async_remote_mourn. (_initialize_remote): Register vAttach, vRun, and set remote exec-file. * NEWS: Mention vAttach, vRun, and gdbserver extended-remote support. * gdb.server/ext-attach.c, gdb.server/ext-attach.exp, gdb.server/ext-run.exp: New files. * lib/gdbserver-support.exp (gdbserver_download): New. (gdbserver_start): New. Update gdbserver expected output. (gdbserver_spawn): Use them. (gdbserver_start_extended): New. * gdb.texinfo (Using the `gdbserver' Program): Add security warning. Rearrange into subsections and subsubsections. Document --multi and --debug. Correct --with-sysroot typo. Update --attach usage. Make load reference clearer. Document monitor exit. (Remote Configuration): Document set remote exec-file, attach-packet, and run-packet. (Packets): Document vAttach and vRun.
2008-01-30 00:51:50 +00:00
return -1
}
# Make sure we're disconnected, in case we're testing with an
# extended-remote board, therefore already connected.
gdb_test "disconnect" ".*"
set target_exec [gdbserver_download_current_prog]
* linux-low.c (linux_attach_lwp): Do not _exit after errors. (linux_kill, linux_detach): Clean up the process list. * remote-utils.c (remote_open): Improve port number parsing. (putpkt_binary, input_interrupt): Only send interrupts if the target is running. * server.c (extended_protocol): Make static. (attached): Define earlier. (exit_requested, response_needed, program_argv): New variables. (target_running): New. (start_inferior): Clear attached here. (attach_inferior): Set attached here. (require_running): Define. (handle_query): Use require_running and target_running. Implement "monitor exit". (handle_v_attach, handle_v_run): New. (handle_v_requests): Use require_running. Handle vAttach and vRun. (gdbserver_usage): Update. (main): Redo argument parsing. Handle --debug and --multi. Handle --attach along with other options or after the port. Save program_argv. Support no initial program. Resynchronize communication with GDB after an error. Handle "monitor exit". Use require_running and target_running. Always allow the extended protocol. Do not error out for Hc0 or Hc-1. Do not automatically restart in extended mode. * README: Refer to the GDB manual. Update --attach usage. * remote.c (struct remote_state): Add cached_wait_status. (remote_exec_file): New variable. (PACKET_vAttach, PACKET_vRun): New constants. (extended_remote_restart): Do not query for status. (struct start_remote_args): New. (remote_start_remote): Take it as a second argument. Check whether the target is running. Issue an error for non-running non-extended targets. Cache the wait status. Set inferior_ptid here. (remote_open_1): Prompt to disconnect non-running targets. Make sure the target is marked running. Do not set inferior_ptid here. Update call to remote_start_remote. Do not call remote_check_symbols if the target is not running. (remote_detach_1): Rename from remote_detach. Take an EXTENDED argument. Handle a non-running target. (remote_detach): Use it. (extended_remote_detach): New. (remote_disconnect): Fix typo. Use remoute_mourn_1. (extended_remote_attach_1, extended_remote_attach) (extended_async_remote_attach): New. (remote_vcont_resume): Remove unused variable. (remote_wait, remote_async_wait): Use any cached wait status. (putpkt_binary, getpkt): Clear any cached wait status. (extended_remoute_mourn_1): New. (extended_remote_mourn): Use it. (extended_async_remote_mourn, extended_remote_run): New. (extended_remote_create_inferior_1): New. (extended_remote_create_inferior): Use it. (extended_remote_async_create_inferior): Likewise. (remote_xfer_partial): Skip for non-executing targets. (init_extended_remote_ops): Set to_detach and to_attach. (init_extended_async_remote_ops): Likewise. Use extended_async_remote_mourn. (_initialize_remote): Register vAttach, vRun, and set remote exec-file. * NEWS: Mention vAttach, vRun, and gdbserver extended-remote support. * gdb.server/ext-attach.c, gdb.server/ext-attach.exp, gdb.server/ext-run.exp: New files. * lib/gdbserver-support.exp (gdbserver_download): New. (gdbserver_start): New. Update gdbserver expected output. (gdbserver_spawn): Use them. (gdbserver_start_extended): New. * gdb.texinfo (Using the `gdbserver' Program): Add security warning. Rearrange into subsections and subsubsections. Document --multi and --debug. Correct --with-sysroot typo. Update --attach usage. Make load reference clearer. Document monitor exit. (Remote Configuration): Document set remote exec-file, attach-packet, and run-packet. (Packets): Document vAttach and vRun.
2008-01-30 00:51:50 +00:00
gdbserver_start_extended
gdb_test_no_output "set remote exec-file $target_exec" "set remote exec-file"
* linux-low.c (linux_attach_lwp): Do not _exit after errors. (linux_kill, linux_detach): Clean up the process list. * remote-utils.c (remote_open): Improve port number parsing. (putpkt_binary, input_interrupt): Only send interrupts if the target is running. * server.c (extended_protocol): Make static. (attached): Define earlier. (exit_requested, response_needed, program_argv): New variables. (target_running): New. (start_inferior): Clear attached here. (attach_inferior): Set attached here. (require_running): Define. (handle_query): Use require_running and target_running. Implement "monitor exit". (handle_v_attach, handle_v_run): New. (handle_v_requests): Use require_running. Handle vAttach and vRun. (gdbserver_usage): Update. (main): Redo argument parsing. Handle --debug and --multi. Handle --attach along with other options or after the port. Save program_argv. Support no initial program. Resynchronize communication with GDB after an error. Handle "monitor exit". Use require_running and target_running. Always allow the extended protocol. Do not error out for Hc0 or Hc-1. Do not automatically restart in extended mode. * README: Refer to the GDB manual. Update --attach usage. * remote.c (struct remote_state): Add cached_wait_status. (remote_exec_file): New variable. (PACKET_vAttach, PACKET_vRun): New constants. (extended_remote_restart): Do not query for status. (struct start_remote_args): New. (remote_start_remote): Take it as a second argument. Check whether the target is running. Issue an error for non-running non-extended targets. Cache the wait status. Set inferior_ptid here. (remote_open_1): Prompt to disconnect non-running targets. Make sure the target is marked running. Do not set inferior_ptid here. Update call to remote_start_remote. Do not call remote_check_symbols if the target is not running. (remote_detach_1): Rename from remote_detach. Take an EXTENDED argument. Handle a non-running target. (remote_detach): Use it. (extended_remote_detach): New. (remote_disconnect): Fix typo. Use remoute_mourn_1. (extended_remote_attach_1, extended_remote_attach) (extended_async_remote_attach): New. (remote_vcont_resume): Remove unused variable. (remote_wait, remote_async_wait): Use any cached wait status. (putpkt_binary, getpkt): Clear any cached wait status. (extended_remoute_mourn_1): New. (extended_remote_mourn): Use it. (extended_async_remote_mourn, extended_remote_run): New. (extended_remote_create_inferior_1): New. (extended_remote_create_inferior): Use it. (extended_remote_async_create_inferior): Likewise. (remote_xfer_partial): Skip for non-executing targets. (init_extended_remote_ops): Set to_detach and to_attach. (init_extended_async_remote_ops): Likewise. Use extended_async_remote_mourn. (_initialize_remote): Register vAttach, vRun, and set remote exec-file. * NEWS: Mention vAttach, vRun, and gdbserver extended-remote support. * gdb.server/ext-attach.c, gdb.server/ext-attach.exp, gdb.server/ext-run.exp: New files. * lib/gdbserver-support.exp (gdbserver_download): New. (gdbserver_start): New. Update gdbserver expected output. (gdbserver_spawn): Use them. (gdbserver_start_extended): New. * gdb.texinfo (Using the `gdbserver' Program): Add security warning. Rearrange into subsections and subsubsections. Document --multi and --debug. Correct --with-sysroot typo. Update --attach usage. Make load reference clearer. Document monitor exit. (Remote Configuration): Document set remote exec-file, attach-packet, and run-packet. (Packets): Document vAttach and vRun.
2008-01-30 00:51:50 +00:00
set testpid [spawn_wait_for_attach $binfile]
* linux-low.c (linux_attach_lwp): Do not _exit after errors. (linux_kill, linux_detach): Clean up the process list. * remote-utils.c (remote_open): Improve port number parsing. (putpkt_binary, input_interrupt): Only send interrupts if the target is running. * server.c (extended_protocol): Make static. (attached): Define earlier. (exit_requested, response_needed, program_argv): New variables. (target_running): New. (start_inferior): Clear attached here. (attach_inferior): Set attached here. (require_running): Define. (handle_query): Use require_running and target_running. Implement "monitor exit". (handle_v_attach, handle_v_run): New. (handle_v_requests): Use require_running. Handle vAttach and vRun. (gdbserver_usage): Update. (main): Redo argument parsing. Handle --debug and --multi. Handle --attach along with other options or after the port. Save program_argv. Support no initial program. Resynchronize communication with GDB after an error. Handle "monitor exit". Use require_running and target_running. Always allow the extended protocol. Do not error out for Hc0 or Hc-1. Do not automatically restart in extended mode. * README: Refer to the GDB manual. Update --attach usage. * remote.c (struct remote_state): Add cached_wait_status. (remote_exec_file): New variable. (PACKET_vAttach, PACKET_vRun): New constants. (extended_remote_restart): Do not query for status. (struct start_remote_args): New. (remote_start_remote): Take it as a second argument. Check whether the target is running. Issue an error for non-running non-extended targets. Cache the wait status. Set inferior_ptid here. (remote_open_1): Prompt to disconnect non-running targets. Make sure the target is marked running. Do not set inferior_ptid here. Update call to remote_start_remote. Do not call remote_check_symbols if the target is not running. (remote_detach_1): Rename from remote_detach. Take an EXTENDED argument. Handle a non-running target. (remote_detach): Use it. (extended_remote_detach): New. (remote_disconnect): Fix typo. Use remoute_mourn_1. (extended_remote_attach_1, extended_remote_attach) (extended_async_remote_attach): New. (remote_vcont_resume): Remove unused variable. (remote_wait, remote_async_wait): Use any cached wait status. (putpkt_binary, getpkt): Clear any cached wait status. (extended_remoute_mourn_1): New. (extended_remote_mourn): Use it. (extended_async_remote_mourn, extended_remote_run): New. (extended_remote_create_inferior_1): New. (extended_remote_create_inferior): Use it. (extended_remote_async_create_inferior): Likewise. (remote_xfer_partial): Skip for non-executing targets. (init_extended_remote_ops): Set to_detach and to_attach. (init_extended_async_remote_ops): Likewise. Use extended_async_remote_mourn. (_initialize_remote): Register vAttach, vRun, and set remote exec-file. * NEWS: Mention vAttach, vRun, and gdbserver extended-remote support. * gdb.server/ext-attach.c, gdb.server/ext-attach.exp, gdb.server/ext-run.exp: New files. * lib/gdbserver-support.exp (gdbserver_download): New. (gdbserver_start): New. Update gdbserver expected output. (gdbserver_spawn): Use them. (gdbserver_start_extended): New. * gdb.texinfo (Using the `gdbserver' Program): Add security warning. Rearrange into subsections and subsubsections. Document --multi and --debug. Correct --with-sysroot typo. Update --attach usage. Make load reference clearer. Document monitor exit. (Remote Configuration): Document set remote exec-file, attach-packet, and run-packet. (Packets): Document vAttach and vRun.
2008-01-30 00:51:50 +00:00
gdb_test "attach $testpid" \
"Attaching to program: .*, process $testpid.*(in|at).*" \
* linux-low.c (linux_attach_lwp): Do not _exit after errors. (linux_kill, linux_detach): Clean up the process list. * remote-utils.c (remote_open): Improve port number parsing. (putpkt_binary, input_interrupt): Only send interrupts if the target is running. * server.c (extended_protocol): Make static. (attached): Define earlier. (exit_requested, response_needed, program_argv): New variables. (target_running): New. (start_inferior): Clear attached here. (attach_inferior): Set attached here. (require_running): Define. (handle_query): Use require_running and target_running. Implement "monitor exit". (handle_v_attach, handle_v_run): New. (handle_v_requests): Use require_running. Handle vAttach and vRun. (gdbserver_usage): Update. (main): Redo argument parsing. Handle --debug and --multi. Handle --attach along with other options or after the port. Save program_argv. Support no initial program. Resynchronize communication with GDB after an error. Handle "monitor exit". Use require_running and target_running. Always allow the extended protocol. Do not error out for Hc0 or Hc-1. Do not automatically restart in extended mode. * README: Refer to the GDB manual. Update --attach usage. * remote.c (struct remote_state): Add cached_wait_status. (remote_exec_file): New variable. (PACKET_vAttach, PACKET_vRun): New constants. (extended_remote_restart): Do not query for status. (struct start_remote_args): New. (remote_start_remote): Take it as a second argument. Check whether the target is running. Issue an error for non-running non-extended targets. Cache the wait status. Set inferior_ptid here. (remote_open_1): Prompt to disconnect non-running targets. Make sure the target is marked running. Do not set inferior_ptid here. Update call to remote_start_remote. Do not call remote_check_symbols if the target is not running. (remote_detach_1): Rename from remote_detach. Take an EXTENDED argument. Handle a non-running target. (remote_detach): Use it. (extended_remote_detach): New. (remote_disconnect): Fix typo. Use remoute_mourn_1. (extended_remote_attach_1, extended_remote_attach) (extended_async_remote_attach): New. (remote_vcont_resume): Remove unused variable. (remote_wait, remote_async_wait): Use any cached wait status. (putpkt_binary, getpkt): Clear any cached wait status. (extended_remoute_mourn_1): New. (extended_remote_mourn): Use it. (extended_async_remote_mourn, extended_remote_run): New. (extended_remote_create_inferior_1): New. (extended_remote_create_inferior): Use it. (extended_remote_async_create_inferior): Likewise. (remote_xfer_partial): Skip for non-executing targets. (init_extended_remote_ops): Set to_detach and to_attach. (init_extended_async_remote_ops): Likewise. Use extended_async_remote_mourn. (_initialize_remote): Register vAttach, vRun, and set remote exec-file. * NEWS: Mention vAttach, vRun, and gdbserver extended-remote support. * gdb.server/ext-attach.c, gdb.server/ext-attach.exp, gdb.server/ext-run.exp: New files. * lib/gdbserver-support.exp (gdbserver_download): New. (gdbserver_start): New. Update gdbserver expected output. (gdbserver_spawn): Use them. (gdbserver_start_extended): New. * gdb.texinfo (Using the `gdbserver' Program): Add security warning. Rearrange into subsections and subsubsections. Document --multi and --debug. Correct --with-sysroot typo. Update --attach usage. Make load reference clearer. Document monitor exit. (Remote Configuration): Document set remote exec-file, attach-packet, and run-packet. (Packets): Document vAttach and vRun.
2008-01-30 00:51:50 +00:00
"attach to remote program 1"
if { [gdb_target_supports_trace] } then {
# Test predefined TSVs are uploaded.
gdb_test_sequence "info tvariables" "check uploaded tsv" {
"\[\r\n\]+Name\[\t \]+Initial\[\t \]+Current"
"\[\r\n\]+\\\$trace_timestamp 0"
}
}
* linux-low.c (linux_attach_lwp): Do not _exit after errors. (linux_kill, linux_detach): Clean up the process list. * remote-utils.c (remote_open): Improve port number parsing. (putpkt_binary, input_interrupt): Only send interrupts if the target is running. * server.c (extended_protocol): Make static. (attached): Define earlier. (exit_requested, response_needed, program_argv): New variables. (target_running): New. (start_inferior): Clear attached here. (attach_inferior): Set attached here. (require_running): Define. (handle_query): Use require_running and target_running. Implement "monitor exit". (handle_v_attach, handle_v_run): New. (handle_v_requests): Use require_running. Handle vAttach and vRun. (gdbserver_usage): Update. (main): Redo argument parsing. Handle --debug and --multi. Handle --attach along with other options or after the port. Save program_argv. Support no initial program. Resynchronize communication with GDB after an error. Handle "monitor exit". Use require_running and target_running. Always allow the extended protocol. Do not error out for Hc0 or Hc-1. Do not automatically restart in extended mode. * README: Refer to the GDB manual. Update --attach usage. * remote.c (struct remote_state): Add cached_wait_status. (remote_exec_file): New variable. (PACKET_vAttach, PACKET_vRun): New constants. (extended_remote_restart): Do not query for status. (struct start_remote_args): New. (remote_start_remote): Take it as a second argument. Check whether the target is running. Issue an error for non-running non-extended targets. Cache the wait status. Set inferior_ptid here. (remote_open_1): Prompt to disconnect non-running targets. Make sure the target is marked running. Do not set inferior_ptid here. Update call to remote_start_remote. Do not call remote_check_symbols if the target is not running. (remote_detach_1): Rename from remote_detach. Take an EXTENDED argument. Handle a non-running target. (remote_detach): Use it. (extended_remote_detach): New. (remote_disconnect): Fix typo. Use remoute_mourn_1. (extended_remote_attach_1, extended_remote_attach) (extended_async_remote_attach): New. (remote_vcont_resume): Remove unused variable. (remote_wait, remote_async_wait): Use any cached wait status. (putpkt_binary, getpkt): Clear any cached wait status. (extended_remoute_mourn_1): New. (extended_remote_mourn): Use it. (extended_async_remote_mourn, extended_remote_run): New. (extended_remote_create_inferior_1): New. (extended_remote_create_inferior): Use it. (extended_remote_async_create_inferior): Likewise. (remote_xfer_partial): Skip for non-executing targets. (init_extended_remote_ops): Set to_detach and to_attach. (init_extended_async_remote_ops): Likewise. Use extended_async_remote_mourn. (_initialize_remote): Register vAttach, vRun, and set remote exec-file. * NEWS: Mention vAttach, vRun, and gdbserver extended-remote support. * gdb.server/ext-attach.c, gdb.server/ext-attach.exp, gdb.server/ext-run.exp: New files. * lib/gdbserver-support.exp (gdbserver_download): New. (gdbserver_start): New. Update gdbserver expected output. (gdbserver_spawn): Use them. (gdbserver_start_extended): New. * gdb.texinfo (Using the `gdbserver' Program): Add security warning. Rearrange into subsections and subsubsections. Document --multi and --debug. Correct --with-sysroot typo. Update --attach usage. Make load reference clearer. Document monitor exit. (Remote Configuration): Document set remote exec-file, attach-packet, and run-packet. (Packets): Document vAttach and vRun.
2008-01-30 00:51:50 +00:00
gdb_test "backtrace" ".*main.*" "backtrace 1"
gdb_test "detach" "Detaching from program.*process.*"
* linux-low.c (linux_attach_lwp): Do not _exit after errors. (linux_kill, linux_detach): Clean up the process list. * remote-utils.c (remote_open): Improve port number parsing. (putpkt_binary, input_interrupt): Only send interrupts if the target is running. * server.c (extended_protocol): Make static. (attached): Define earlier. (exit_requested, response_needed, program_argv): New variables. (target_running): New. (start_inferior): Clear attached here. (attach_inferior): Set attached here. (require_running): Define. (handle_query): Use require_running and target_running. Implement "monitor exit". (handle_v_attach, handle_v_run): New. (handle_v_requests): Use require_running. Handle vAttach and vRun. (gdbserver_usage): Update. (main): Redo argument parsing. Handle --debug and --multi. Handle --attach along with other options or after the port. Save program_argv. Support no initial program. Resynchronize communication with GDB after an error. Handle "monitor exit". Use require_running and target_running. Always allow the extended protocol. Do not error out for Hc0 or Hc-1. Do not automatically restart in extended mode. * README: Refer to the GDB manual. Update --attach usage. * remote.c (struct remote_state): Add cached_wait_status. (remote_exec_file): New variable. (PACKET_vAttach, PACKET_vRun): New constants. (extended_remote_restart): Do not query for status. (struct start_remote_args): New. (remote_start_remote): Take it as a second argument. Check whether the target is running. Issue an error for non-running non-extended targets. Cache the wait status. Set inferior_ptid here. (remote_open_1): Prompt to disconnect non-running targets. Make sure the target is marked running. Do not set inferior_ptid here. Update call to remote_start_remote. Do not call remote_check_symbols if the target is not running. (remote_detach_1): Rename from remote_detach. Take an EXTENDED argument. Handle a non-running target. (remote_detach): Use it. (extended_remote_detach): New. (remote_disconnect): Fix typo. Use remoute_mourn_1. (extended_remote_attach_1, extended_remote_attach) (extended_async_remote_attach): New. (remote_vcont_resume): Remove unused variable. (remote_wait, remote_async_wait): Use any cached wait status. (putpkt_binary, getpkt): Clear any cached wait status. (extended_remoute_mourn_1): New. (extended_remote_mourn): Use it. (extended_async_remote_mourn, extended_remote_run): New. (extended_remote_create_inferior_1): New. (extended_remote_create_inferior): Use it. (extended_remote_async_create_inferior): Likewise. (remote_xfer_partial): Skip for non-executing targets. (init_extended_remote_ops): Set to_detach and to_attach. (init_extended_async_remote_ops): Likewise. Use extended_async_remote_mourn. (_initialize_remote): Register vAttach, vRun, and set remote exec-file. * NEWS: Mention vAttach, vRun, and gdbserver extended-remote support. * gdb.server/ext-attach.c, gdb.server/ext-attach.exp, gdb.server/ext-run.exp: New files. * lib/gdbserver-support.exp (gdbserver_download): New. (gdbserver_start): New. Update gdbserver expected output. (gdbserver_spawn): Use them. (gdbserver_start_extended): New. * gdb.texinfo (Using the `gdbserver' Program): Add security warning. Rearrange into subsections and subsubsections. Document --multi and --debug. Correct --with-sysroot typo. Update --attach usage. Make load reference clearer. Document monitor exit. (Remote Configuration): Document set remote exec-file, attach-packet, and run-packet. (Packets): Document vAttach and vRun.
2008-01-30 00:51:50 +00:00
gdb_test "backtrace" "No stack\\." "backtrace with no program"
gdb_test "attach $testpid" \
"Attaching to program: .*, process $testpid.*(in|at).*" \
* linux-low.c (linux_attach_lwp): Do not _exit after errors. (linux_kill, linux_detach): Clean up the process list. * remote-utils.c (remote_open): Improve port number parsing. (putpkt_binary, input_interrupt): Only send interrupts if the target is running. * server.c (extended_protocol): Make static. (attached): Define earlier. (exit_requested, response_needed, program_argv): New variables. (target_running): New. (start_inferior): Clear attached here. (attach_inferior): Set attached here. (require_running): Define. (handle_query): Use require_running and target_running. Implement "monitor exit". (handle_v_attach, handle_v_run): New. (handle_v_requests): Use require_running. Handle vAttach and vRun. (gdbserver_usage): Update. (main): Redo argument parsing. Handle --debug and --multi. Handle --attach along with other options or after the port. Save program_argv. Support no initial program. Resynchronize communication with GDB after an error. Handle "monitor exit". Use require_running and target_running. Always allow the extended protocol. Do not error out for Hc0 or Hc-1. Do not automatically restart in extended mode. * README: Refer to the GDB manual. Update --attach usage. * remote.c (struct remote_state): Add cached_wait_status. (remote_exec_file): New variable. (PACKET_vAttach, PACKET_vRun): New constants. (extended_remote_restart): Do not query for status. (struct start_remote_args): New. (remote_start_remote): Take it as a second argument. Check whether the target is running. Issue an error for non-running non-extended targets. Cache the wait status. Set inferior_ptid here. (remote_open_1): Prompt to disconnect non-running targets. Make sure the target is marked running. Do not set inferior_ptid here. Update call to remote_start_remote. Do not call remote_check_symbols if the target is not running. (remote_detach_1): Rename from remote_detach. Take an EXTENDED argument. Handle a non-running target. (remote_detach): Use it. (extended_remote_detach): New. (remote_disconnect): Fix typo. Use remoute_mourn_1. (extended_remote_attach_1, extended_remote_attach) (extended_async_remote_attach): New. (remote_vcont_resume): Remove unused variable. (remote_wait, remote_async_wait): Use any cached wait status. (putpkt_binary, getpkt): Clear any cached wait status. (extended_remoute_mourn_1): New. (extended_remote_mourn): Use it. (extended_async_remote_mourn, extended_remote_run): New. (extended_remote_create_inferior_1): New. (extended_remote_create_inferior): Use it. (extended_remote_async_create_inferior): Likewise. (remote_xfer_partial): Skip for non-executing targets. (init_extended_remote_ops): Set to_detach and to_attach. (init_extended_async_remote_ops): Likewise. Use extended_async_remote_mourn. (_initialize_remote): Register vAttach, vRun, and set remote exec-file. * NEWS: Mention vAttach, vRun, and gdbserver extended-remote support. * gdb.server/ext-attach.c, gdb.server/ext-attach.exp, gdb.server/ext-run.exp: New files. * lib/gdbserver-support.exp (gdbserver_download): New. (gdbserver_start): New. Update gdbserver expected output. (gdbserver_spawn): Use them. (gdbserver_start_extended): New. * gdb.texinfo (Using the `gdbserver' Program): Add security warning. Rearrange into subsections and subsubsections. Document --multi and --debug. Correct --with-sysroot typo. Update --attach usage. Make load reference clearer. Document monitor exit. (Remote Configuration): Document set remote exec-file, attach-packet, and run-packet. (Packets): Document vAttach and vRun.
2008-01-30 00:51:50 +00:00
"attach to remote program 2"
gdb_test "backtrace" ".*main.*" "backtrace 2"
gdb_test "kill" "" "kill" "Kill the program being debugged.*" "y"
2010-06-08 Michael Snyder <msnyder@vmware.com> * gdb.ada/assign_1.exp: Use ".*" instead of "" as wildcard regexp. * gdb.ada/boolean_expr.exp: * gdb.ada/frame_args.exp: Ditto. * gdb.ada/lang_switch.exp: Ditto. * gdb.ada/ptype_arith_binop.exp: Ditto. * gdb.ada/ref_param.exp: Ditto. * gdb.ada/type_coercion.exp:Ditto. * gdb.asm/asm-source.exp: Ditto. * gdb.base/attach.exp: Ditto. * gdb.base/bitfields2.exp: Ditto. * gdb.base/call-signal-resume.exp: Ditto. * gdb.base/callfuncs.exp: Ditto. * gdb.base/commands.exp: Ditto. * gdb.base/dbx.exp: Ditto. * gdb.base/default.exp: Ditto. * gdb.base/dump.exp: Ditto. * gdb.base/exprs.exp: Ditto. * gdb.base/freebpcmd.exp: Ditto. * gdb.base/interrupt.exp: Ditto. * gdb.base/list.exp: Ditto. * gdb.base/long_long.exp: Ditto. * gdb.base/maint.exp: Ditto. * gdb.base/ptype.exp: Ditto. * gdb.base/return.exp: Ditto. * gdb.base/setshow.exp: Ditto. * gdb.base/sigbpt.exp: Ditto. * gdb.base/sigrepeat.exp: Ditto. * gdb.cp/classes.exp: Ditto. * gdb.dwarf2/dw2-restore.exp: Ditto. * gdb.gdb/selftest.exp: Ditto. * gdb.multi/base.exp: Ditto. * gdb.multi/bkpt-multi-exec.exp: Ditto. * gdb.python/py-block.exp: Ditto. * gdb.python/py-prettyprint.exp: Ditto. * gdb.python/py-template.exp: Ditto. * gdb.server/ext-attach.exp: Ditto. * gdb.server/ext-run.exp: Ditto. * gdb.server/server-mon.exp: Ditto. * gdb.threads/fork-thread-pending.exp: Ditto. * gdb.threads/hand-call-in-threads.exp: Ditto. * gdb.threads/interrupted-hand-call.exp: Ditto. * gdb.threads/linux-dp.exp: Ditto. * gdb.threads/manythreads.exp: Ditto. * gdb.threads/print-threads.exp: Ditto. * gdb.threads/pthreads.exp: Ditto. * gdb.threads/schedlock.exp: Ditto. * gdb.threads/thread-unwindonsignal.exp: Ditto. * gdb.threads/threadapply.exp: Ditto.
2010-06-10 19:48:20 +00:00
gdb_test_no_output "monitor exit"