old-cross-binutils/gdb/Makefile.in

1612 lines
57 KiB
Makefile
Raw Normal View History

# Copyright 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997
* README: Add note about SPARCworks cc release 3.0 and higher. Add procfs support for Alpha OSF/1-2.x. * config/alpha/nm-osf.h: Renamed from nm-alpha.h, generic OSF/1 native support. * config/alpha/alpha-osf1.mh (NAT_FILE): Changed accordingly. (MUNCH_DEFINE): Removed. * config/alpha/alpha-osf2.mh, config/alpha/nm-osf2.h: New files for procfs support. * configure.in (alpha-dec-osf*): Use alpha-osf2.mh for OSF/1 release 2.x and higher, else alpha-osf1.mh, as the procfs support in release 1.x is incomplete. * Makefile.in (ALLCONFIG): Add config/alpha/alpha-osf2.mh. * alpha-nat.c (supply_gregset, fill_gregset, supply_fpgregset, fill_fpgregset): New routines for procfs support. * inftarg.c (_initialize_inftarg): Don't add ptrace support if we have an optional procfs and /proc is accessible. * procfs.c: Include sys/fault.h and sys/syscall.h before including sys/procfs.h. (unconditionally_kill_inferior): If PROCFS_NEED_PIOCSSIG_FOR_KILL is defined, additionally perform a PIOCSSIG to really terminate the inferior. (create_procinfo): Always return a result. (create_procinfo, do_attach): Don't trace T_IFAULT faults if PROCFS_DONT_TRACE_IFAULT is defined. (procfs_init_inferior): Use START_INFERIOR_TRAPS_EXPECTED as argument to startup_inferior if it is defined. (proc_set_exec_trap): If PIOCSSPCACT is defined, use it instead of tracing exits from exec system calls. Needed for the user level loader under Alpha OSF/1. (do_detach): Clear any pending signal if we want to detach from a process without a signal. (set_proc_siginfo): If PROCFS_DONT_PIOCSSIG_CURSIG is defined, don't issue a PIOCSSIG if pr_cursig already contains the signal we intend to set. (info_proc_signals): If PROCFS_SIGPEND_OFFSET is defined, the pending signals are numbered from 1 instead of 0. (info_proc_mappings): Increase size of output format for addresses if BFD_HOST_64_BIT is defined. (procfs_stop): Renamed from child_stop. (_initialize_procfs): Don't add procfs support if we have an optional procfs and /proc is not accessible.
1995-01-12 18:12:04 +00:00
# Free Software Foundation, Inc.
# This file is part of GDB.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
prefix = @prefix@
exec_prefix = @exec_prefix@
host_alias = @host_alias@
target_alias = @target_alias@
program_transform_name = @program_transform_name@
bindir = @bindir@
libdir = @libdir@
tooldir = $(libdir)/$(target_alias)
1992-03-14 02:30:18 +00:00
datadir = @datadir@
mandir = @mandir@
man1dir = $(mandir)/man1
man2dir = $(mandir)/man2
man3dir = $(mandir)/man3
man4dir = $(mandir)/man4
man5dir = $(mandir)/man5
man6dir = $(mandir)/man6
man7dir = $(mandir)/man7
man8dir = $(mandir)/man8
man9dir = $(mandir)/man9
infodir = @infodir@
includedir = @includedir@
SHELL = /bin/sh
INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_DATA = @INSTALL_DATA@
AR = @AR@
AR_FLAGS = qv
RANLIB = @RANLIB@
AWK = @AWK@
# Flags that describe where you can find the termcap library.
# This can be overridden in the host Makefile fragment file.
TERMCAP = -ltermcap
1993-06-23 22:59:35 +00:00
# If you are compiling with GCC, make sure that either 1) You have the
# fixed include files where GCC can reach them, or 2) You use the
# -traditional flag. Otherwise the ioctl calls in inflow.c
# will be incorrectly compiled. The "fixincludes" script in the gcc
# distribution will fix your include files up.
CC=@CC@
# Directory containing source files.
srcdir = @srcdir@
VPATH = @srcdir@
YACC=@YACC@
# where to find makeinfo, preferably one designed for texinfo-2
MAKEINFO=makeinfo
# Set this up with gcc if you have gnu ld and the loader will print out
1993-06-23 22:59:35 +00:00
# line numbers for undefined references.
#CC_LD=gcc -static
CC_LD=$(CC)
1993-06-23 22:59:35 +00:00
# Where is our "include" directory? Typically $(srcdir)/../include.
# This is essentially the header file directory for the library
# routines in libiberty.
INCLUDE_DIR = $(srcdir)/../include
INCLUDE_CFLAGS = -I$(INCLUDE_DIR)
# Where is the "-liberty" library? Typically in ../libiberty.
1993-06-23 22:59:35 +00:00
LIBIBERTY = ../libiberty/libiberty.a
# Where is the MMALLOC library? Typically in ../mmalloc.
# Note that mmalloc can still be used on systems without mmap().
* Makefile.in (MMALLOC_CFLAGS): Eliminate intermediate MMALLOC_DISABLE and MMALLOC_CHECK macros, and add comment indicating how host dependent makefile fragment should modify MMALLOC_CFLAGS to not use mmalloc, or to use it but to not do heap corruption checking. * gdbserver/Makefile.in: Ditto. * utils.c (init_malloc): Replace warning() use with direct call of fprintf_unfiltered, since current_target has not yet been set and thus we cannot use warning(). If we try to use mmcheck and it fails, suggest that this configuration needs NO_MMCHECK or MMCHECK_FORCE defined. Other small mmalloc related cleanups. * config/sparc/sun4os4.mh (MMALLOC_CFLAGS): Define MMCHECK_FORCE to 1. * config/alpha/alpha-osf2.mh (MMALLOC_CFLAGS): Set to -DNO_MMCHECK. * config/sparc/xm-sun4os4.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT): * config/i386/xm-i386v4.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT): * config/i386/xm-linux.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT): * config/m68k/xm-hp300hpux.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT): * config/m68k/xm-m68kv4.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT); * config/m68k/xm-sun3os4.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT): * config/pa/xm-hppah.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT): * config/sparc/xm-sun4sol2.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT): Remove obsolete defines. * config/alpha/alpha-linux.mh (MMALLOC_DISABLE): * config/alpha/alpha-osf1.mh (MMALLOC_DISABLE): * config/rs6000/rs6000.mh (MMALLOC_DISABLE): * config/rs6000/aix4.mh (MMALLOC_DISABLE): * config/powerpc/aix4.mh (MMALLOC_DISABLE): * config/powerpc/aix.mh (MMALLOC_DISABLE): * config/ns32k/ns32km3.mh (MMALLOC_DISABLE): * config/mips/mipsm3.mh (MMALLOC_DISABLE): * config/mips/decstation.mh (MMALLOC_DISABLE): * config/m88k/cxux.mh (MMALLOC_DISABLE): * config/i386/i386mk.mh (MMALLOC_DISABLE): * config/i386/i386m3.mh (MMALLOC_DISABLE): * config/i386/i386gnu.mh (MMALLOC_DISABLE): Use MMALLOC_CFLAGS instead.
1996-07-11 07:41:51 +00:00
# To use your system malloc, in the host makefile fragment set MMALLOC_CFLAGS
# to -DNO_MMALLOC and set MMALLOC to empty.
# To use mmalloc but not use heap checking, in the host makefile fragment set
# MMALLOC_CFLAGS to the value below but add -DNO_MMCHECK.
# To use mmalloc and heap checking on a system where the C runtime allocates
# memory that is never freed, in the host makefile fragment set MMALLOC_CFLAGS
# to the value below and add -DFORCE_MMCHECK=1
MMALLOC_DIR = ../mmalloc
MMALLOC_SRC = $(srcdir)/$(MMALLOC_DIR)
MMALLOC = $(MMALLOC_DIR)/libmmalloc.a
* Makefile.in (MMALLOC_CFLAGS): Eliminate intermediate MMALLOC_DISABLE and MMALLOC_CHECK macros, and add comment indicating how host dependent makefile fragment should modify MMALLOC_CFLAGS to not use mmalloc, or to use it but to not do heap corruption checking. * gdbserver/Makefile.in: Ditto. * utils.c (init_malloc): Replace warning() use with direct call of fprintf_unfiltered, since current_target has not yet been set and thus we cannot use warning(). If we try to use mmcheck and it fails, suggest that this configuration needs NO_MMCHECK or MMCHECK_FORCE defined. Other small mmalloc related cleanups. * config/sparc/sun4os4.mh (MMALLOC_CFLAGS): Define MMCHECK_FORCE to 1. * config/alpha/alpha-osf2.mh (MMALLOC_CFLAGS): Set to -DNO_MMCHECK. * config/sparc/xm-sun4os4.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT): * config/i386/xm-i386v4.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT): * config/i386/xm-linux.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT): * config/m68k/xm-hp300hpux.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT): * config/m68k/xm-m68kv4.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT); * config/m68k/xm-sun3os4.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT): * config/pa/xm-hppah.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT): * config/sparc/xm-sun4sol2.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT): Remove obsolete defines. * config/alpha/alpha-linux.mh (MMALLOC_DISABLE): * config/alpha/alpha-osf1.mh (MMALLOC_DISABLE): * config/rs6000/rs6000.mh (MMALLOC_DISABLE): * config/rs6000/aix4.mh (MMALLOC_DISABLE): * config/powerpc/aix4.mh (MMALLOC_DISABLE): * config/powerpc/aix.mh (MMALLOC_DISABLE): * config/ns32k/ns32km3.mh (MMALLOC_DISABLE): * config/mips/mipsm3.mh (MMALLOC_DISABLE): * config/mips/decstation.mh (MMALLOC_DISABLE): * config/m88k/cxux.mh (MMALLOC_DISABLE): * config/i386/i386mk.mh (MMALLOC_DISABLE): * config/i386/i386m3.mh (MMALLOC_DISABLE): * config/i386/i386gnu.mh (MMALLOC_DISABLE): Use MMALLOC_CFLAGS instead.
1996-07-11 07:41:51 +00:00
MMALLOC_CFLAGS = -I$(MMALLOC_SRC)
1993-06-23 22:59:35 +00:00
# Where is the BFD library? Typically in ../bfd.
1993-06-23 22:59:35 +00:00
BFD_DIR = ../bfd
BFD = $(BFD_DIR)/libbfd.a
BFD_SRC = $(srcdir)/$(BFD_DIR)
BFD_CFLAGS = -I$(BFD_DIR) -I$(BFD_SRC)
1993-06-23 22:59:35 +00:00
# Where is the READLINE library? Typically in ../readline.
READLINE_DIR = ../readline
READLINE = $(READLINE_DIR)/libreadline.a
READLINE_SRC = $(srcdir)/$(READLINE_DIR)
READLINE_CFLAGS = -I$(READLINE_SRC)
# Opcodes currently live in one of two places. Either they are in the
# opcode library, typically ../opcodes, or they are in a header file
# in INCLUDE_DIR.
# Where is the "-lopcodes" library, with (some of) the opcode tables and
# disassemblers?
OPCODES = ../opcodes/libopcodes.a
1993-06-23 22:59:35 +00:00
# Where are the other opcode tables which only have header file
# versions?
1993-06-24 23:16:00 +00:00
OP_INCLUDE = $(INCLUDE_DIR)/opcode
OPCODES_CFLAGS = -I$(OP_INCLUDE)
# The simulator is usually nonexistent; targets that include one
# should set this to list all the .o or .a files to be linked in.
SIM =
#start-sanitize-gdbtk
# Where is the TCL library? Typically in ../tcl.
LIB_INSTALL_DIR = $(libdir)
TCL = @TCL_LD_SEARCH_FLAGS@ @TCL_BUILD_LIB_SPEC@
TCL_CFLAGS = @TCLHDIR@
# Where is the TK library? Typically in ../tk.
TK = @TK_BUILD_LIB_SPEC@
TK_CFLAGS = @TKHDIR@
X11_CFLAGS = @TK_XINCLUDES@
X11_LDFLAGS =
X11_LIBS =
ENABLE_GDBTK= @ENABLE_GDBTK@
#end-sanitize-gdbtk
ENABLE_CFLAGS= @ENABLE_CFLAGS@
# -I. for config files.
# -I$(srcdir) for gdb internal headers and possibly for gnu-regex.h also.
1993-06-23 22:59:35 +00:00
# -I$(srcdir)/config for more generic config files.
# It is also possible that you will need to add -I/usr/include/sys if
# your system doesn't have fcntl.h in /usr/include (which is where it
# should be according to Posix).
DEFS = @DEFS@
GDB_CFLAGS = -I. -I$(srcdir) -I$(srcdir)/config $(DEFS)
1993-06-23 22:59:35 +00:00
# M{H,T}_CFLAGS, if defined, have host- and target-dependent CFLAGS
# from the config directory.
GLOBAL_CFLAGS = $(MT_CFLAGS) $(MH_CFLAGS)
#PROFILE_CFLAGS = -pg
# CFLAGS is specifically reserved for setting from the command line
1993-06-23 22:59:35 +00:00
# when running make. I.E. "make CFLAGS=-Wmissing-prototypes".
CFLAGS = -g
# Need to pass this to testsuite for "make check". Probably should be
# consistent with top-level Makefile.in and gdb/testsuite/Makefile.in
# so "make check" has the same result no matter where it is run.
CXXFLAGS = -g -O
1993-06-23 22:59:35 +00:00
# INTERNAL_CFLAGS is the aggregate of all other *CFLAGS macros.
INTERNAL_CFLAGS = $(CFLAGS) $(GLOBAL_CFLAGS) $(PROFILE_CFLAGS) \
$(GDB_CFLAGS) $(OPCODES_CFLAGS) $(READLINE_CFLAGS) \
* Makefile.in (INTERNAL_CFLAGS): Add ENABLE_CFLAGS. * fork-child.c (fork_inferior): Add call to TARGET_CREATE_INFERIOR_HOOK to allow target specific code to get control just before the new process executes it's first instruction. * remote-mips.c (mips_initialize): Cleanup a bit. Don't try to receive a packet at first. This speeds up initialization a lot. Use TARGET_MONITOR_PROMPT instead of "<IDT>". (common_breakpoint): Use rresponse instead of rerrflg to inspect error code. * symfile.c (syms_from_objfile reread_symbols): Call TARGET_SYMFILE_POSTREAD to allow target specific code to get control after reading new symbols. * target.h: New macros TARGET_SYMFILE_POSTREAD, and TARGET_CREATE_INFERIOR_HOOK. See above for descriptions. * config/mips/{irix5.mh nm-irix5.h}: Delete nm-irix5.h. Make NAT_FILE point directly at ../nm-sysv4.h. * config/mips/{mipsm3.mh nm-m3.h}: Delete nm-m3.h. Make NAT_FILE point directly at ../nm-m3.h. * config/mips/{mipsv4.mh nm-sysv4.h}: Delete nm-sysv4.h. Make NAT_FILE point directly at ../nm-sysv4.h. * config/mips/nm-mips.h: Improve comment at top of file. * config/mips/tm-mips.h (TARGET_MONITOR_PROMPT): Change definition into a proper string. start-sanitize-gm * configure configure.in: Add support for --enable-gm. (mips*-*-magic*): Change target from magic to idt. * eval.c expprint.c expression.h parse.c remote-mips.c utils.c: Change GENERAL_MAGIC_HACKS to GENERAL_MAGIC. * magic.c magic.h: Update files from GM. * config/mips/magic.mt: Delete. No longer necessary now that we use --enable mechanism. * config/mips/tm-idt.h: Add GM stuff needed for remote GM box. * config/mips/tm-irix5.h: Add GM stuff needed for native Irix box. * config/mips/tm-magic.h: Move up to config/tm-magic.h. Move all platform specific stuff into tm-irix.h and tm-idt.h. Add defs for TARGET_SYMFILE_POSTREAD and TARGET_CREATE_INFERIOR_HOOK. end-sanitize-gm
1995-11-04 19:02:42 +00:00
$(BFD_CFLAGS) $(MMALLOC_CFLAGS) $(INCLUDE_CFLAGS) $(ENABLE_CFLAGS)
# LDFLAGS is specifically reserved for setting from the command line
# when running make.
# Profiling options need to go here to work.
# I think it's perfectly reasonable for a user to set -pg in CFLAGS
# and have it work; that's why CFLAGS is here.
* Makefile.in: Add rule for hpux-thread.o (needs special header files). * (SUBDIRS): Remove mswin. * Change procedure for creating init.c. Speeds things up quite a bit. * config.in configure configure.in: Check for select, poll. * Check for OSF header files before including hpux-thread.o. * Don't configure doc or testsuite when building under MSVC. * findvar.c value.h (read_register_pid write_register_pid): Make global. Needed for hppa-tdep.c. * (supply_register): Don't set pid to inferior_pid when supplying registers. * hppa-tdep.c (saved_pc_after_call): frame_saved_pc -> FRAME_SAVED_PC. * (frame_saved_pc): Change name to hppa_frame_saved_pc. * (hppa_pop_frame): Don't use a pid of 0 with target_write_pc. Use write_pc instead, which uses the correct pid. * (target_read_pc target_write_pc): Use read/write_register_pid instead of read/write_register to preserve the pid passed in. * inftarg.c (child_can_run): Add flag child_suppress_run to allow hpux-threads.c to override this as a runnable target. * config/pa/nm-hppah.h: Define target_new_objfile and target_pid_to_str. * config/pa/tm-hppa.h (FRAME_SAVED_PC): Use hppa_frame_saved_pc instead of frame_saved_pc. * config/m68k/tm-m68k.h: Define TARGET_M68K for Wingdb. * config/m68k/tm-monitor.h: Use FRAME_CHAIN_VALID_ALTERNATE, since we can't easily determine the start file bounds with ELF. * config/mips/tm-mips.h: Define TARGET_MIPS for Wingdb. * hpux-thread.c: New file for HPUX/OSF thread support. * osf-share/{README AT386/cma_thread_io.h HP800/cma_thread_io.h RIOS/cma_thread_io.h cma_attr.h cma_deb_core.h cma_debug_client.h cma_errors.h cma_handle.h cma_init.h cma_list.h cma_mutex.h cma_sched.h cma_semaphore_defs.h cma_sequence.h cma_stack.h cma_stack_int.h cma_tcb_defs.h cma_util.h}: New files for OSF thread support.
1996-10-08 17:06:17 +00:00
INTERNAL_LDFLAGS = $(CFLAGS) $(GLOBAL_CFLAGS) $(PROFILE_CFLAGS) $(LDFLAGS) @CONFIG_LDFLAGS@ @HLDFLAGS@
HLDENV = @HLDENV@
# We are using our own version of REGEX now to be consistent across
# machines.
REGEX = gnu-regex.o
REGEX1 = gnu-regex.o
# If your system is missing alloca(), or, more likely, it's there but
1993-06-23 22:59:35 +00:00
# it doesn't work, then refer to libiberty.
# Libraries and corresponding dependencies for compiling gdb.
# {X,T}M_CLIBS, defined in *config files, have host- and target-dependent libs.
# TERMCAP comes after readline, since readline depends on it.
# MMALLOC comes after anything else that might want an allocation function.
# LIBIBERTY appears twice on purpose.
# If you have the Cygnus libraries installed,
1993-06-23 22:59:35 +00:00
# you can use 'CLIBS=$(INSTALLED_LIBS)' 'CDEPS='
INSTALLED_LIBS=-lbfd -lreadline -lopcodes -liberty \
$(TERMCAP) $(XM_CLIBS) $(TM_CLIBS) $(NAT_CLIBS) @LIBS@ \
-lmmalloc -liberty
CLIBS = $(SIM) $(BFD) $(READLINE) $(OPCODES) $(LIBIBERTY) \
$(TERMCAP) $(XM_CLIBS) $(TM_CLIBS) $(NAT_CLIBS) @LIBS@ \
$(MMALLOC) $(LIBIBERTY)
CDEPS = $(XM_CDEPS) $(TM_CDEPS) $(NAT_CDEPS) $(SIM) $(BFD) $(READLINE) \
$(OPCODES) $(MMALLOC) $(LIBIBERTY)
1993-06-23 22:59:35 +00:00
ADD_FILES = $(REGEX) $(XM_ADD_FILES) $(TM_ADD_FILES) $(NAT_ADD_FILES)
ADD_DEPS = $(REGEX1) $(XM_ADD_FILES) $(TM_ADD_FILES) $(NAT_ADD_FILES)
VERSION = 4.16.1
DIST=gdb
LINT=/usr/5bin/lint
1993-06-23 22:59:35 +00:00
LINTFLAGS= $(BFD_CFLAGS)
RUNTEST = `if [ -f $${rootsrc}/../dejagnu/runtest ] ; then \
echo $${rootsrc}/../dejagnu/runtest ; else echo runtest; \
fi`
1993-03-17 09:05:19 +00:00
RUNTESTFLAGS=
1993-03-03 03:15:52 +00:00
# This is ser-unix.o for any system which supports a v7/BSD/SYSV/POSIX
# interface to the serial port. Hopefully if get ported to OS/2, VMS,
# etc., then there will be (as part of the C library or perhaps as
# part of libiberty) a POSIX interface. But at least for now the
# host-dependent makefile fragment might need to use something else
# besides ser-unix.o
SER_HARDWIRE = ser-unix.o
# The `remote' debugging target is supported for most architectures,
# but not all (e.g. 960)
REMOTE_OBS = remote.o dcache.o remote-utils.o
# This is remote-sim.o if a simulator is to be linked in.
SIM_OBS =
ANNOTATE_OBS = annotate.o
# Host and target-dependent makefile fragments come in here.
@host_makefile_frag@
@target_makefile_frag@
# End of host and target-dependent makefile fragments
FLAGS_TO_PASS = \
"prefix=$(prefix)" \
"exec_prefix=$(exec_prefix)" \
"against=$(against)" \
"AR=$(AR)" \
"AR_FLAGS=$(AR_FLAGS)" \
"CC=$(CC)" \
"CFLAGS=$(CFLAGS)" \
"CHILLFLAGS=$(CHILLFLAGS)" \
"CHILL=$(CHILL)" \
"CHILL_LIB=$(CHILL_LIB)" \
"CXX=$(CXX)" \
"CXXFLAGS=$(CXXFLAGS)" \
"RANLIB=$(RANLIB)" \
"MAKEINFO=$(MAKEINFO)" \
"INSTALL=$(INSTALL)" \
"INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
"INSTALL_DATA=$(INSTALL_DATA)" \
1993-03-17 09:05:19 +00:00
"RUNTEST=$(RUNTEST)" \
"RUNTESTFLAGS=$(RUNTESTFLAGS)"
# Flags that we pass when building the testsuite.
# empty for native, $(target_alias)/ for cross
target_subdir = @target_subdir@
CC_FOR_TARGET = ` \
if [ -f $${rootme}/../gcc/xgcc ] ; then \
if [ -f $${rootme}/../$(target_subdir)newlib/Makefile ] ; then \
echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/ -idirafter $${rootme}/$(target_subdir)newlib/targ-include -idirafter $${rootsrc}/../$(target_subdir)newlib/libc/include -nostdinc -B$${rootme}/../$(target_subdir)newlib/; \
else \
echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/; \
fi; \
else \
if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
echo $(CC); \
else \
t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
fi; \
fi`
CXX = gcc
CXX_FOR_TARGET = ` \
if [ -f $${rootme}/../gcc/xgcc ] ; then \
if [ -f $${rootme}/../$(target_subdir)newlib/Makefile ] ; then \
echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/ -idirafter $${rootme}/$(target_subdir)newlib/targ-include -idirafter $${rootsrc}/../$(target_subdir)newlib/libc/include -nostdinc -B$${rootme}/../$(target_subdir)newlib/; \
else \
echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/; \
fi; \
else \
if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
echo $(CXX); \
else \
t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
fi; \
fi`
CHILLFLAGS = $(CFLAGS)
CHILL = gcc
CHILL_FOR_TARGET = ` \
if [ -f $${rootme}/../gcc/Makefile ] ; then \
echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/ -L$${rootme}/../gcc/ch/runtime/; \
else \
if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
echo $(CC); \
else \
t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
fi; \
fi`
CHILL_LIB = ` \
if [ -f $${rootme}/../gcc/ch/runtime/libchill.a ] ; then \
echo $${rootme}/../gcc/ch/runtime/chillrt0.o \
$${rootme}/../gcc/ch/runtime/libchill.a; \
else \
echo -lchill; \
fi`
# The use of $$(x_FOR_TARGET) reduces the command line length by not
# duplicating the lengthy definition.
TARGET_FLAGS_TO_PASS = \
"prefix=$(prefix)" \
"exec_prefix=$(exec_prefix)" \
"against=$(against)" \
'CC=$$(CC_FOR_TARGET)' \
"CC_FOR_TARGET=$(CC_FOR_TARGET)" \
"CFLAGS=$(CFLAGS)" \
"CHILLFLAGS=$(CHILLFLAGS)" \
'CHILL=$$(CHILL_FOR_TARGET)' \
"CHILL_FOR_TARGET=$(CHILL_FOR_TARGET)" \
"CHILL_LIB=$(CHILL_LIB)" \
'CXX=$$(CXX_FOR_TARGET)' \
"CXX_FOR_TARGET=$(CXX_FOR_TARGET)" \
"CXXFLAGS=$(CXXFLAGS)" \
"INSTALL=$(INSTALL)" \
"INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
"INSTALL_DATA=$(INSTALL_DATA)" \
"MAKEINFO=$(MAKEINFO)" \
1993-03-17 09:05:19 +00:00
"RUNTEST=$(RUNTEST)" \
"RUNTESTFLAGS=$(RUNTESTFLAGS)"
# All source files that go into linking GDB.
# Links made at configuration time should not be specified here, since
# SFILES is used in building the distribution archive.
SFILES = bcache.c blockframe.c breakpoint.c buildsym.c c-exp.y \
* bcache.c, bcache.h: New files to implement a byte cache. * Makefile.in (SFILES): Add bcache.c. (symtab_h): Add bcache.h. (HFILES_NO_SRCDIR): add bcache.h (COMMON_OBJS): Add bcache.o (bcache.o): New target. * dbxread.c (start_psymtab): Make global_syms & static_syms type "partial_symbol **". * hpread.c (hpread_start_symtab): Ditto. * os9kread.c (os9k_start_psymtab): Ditto. * stabsread.h (start_psymtab): Ditto. * {symfile.c, symfile.h} (start_psymtab_common): Ditto. * maint.c (maintenance_print_statistics): Call print_symbol_bcache_statistics. * objfiles.c (allocate_objfile): Initialize psymbol bcache malloc and free pointers. * solib.c (allocate_rt_common_objfile): Ditto. * symfile.c (reread_symbols): Ditto. (free_objfile): Free psymbol bcache when objfile is freed. (objfile_relocate): Use new indirect psymbol pointers. * objfiles.h (struct objfile): Add psymbol cache. * symfile.c (compare_psymbols): Now passed pointers to pointers to psymbols. (reread_symbols): Free psymbol bcache when freeing other objfile resources. (add_psymbol_to_list, add_psymbol_addr_to_list): Initialize new psymbol using the psymbol bcache. (init_psymbol_list): Psymbol lists now contain pointers rather than the actual psymbols. * symfile.h (psymbol_allocation_list): Psymbol lists now dynamically grown arrays of pointers. (ADD_PSYMBOL_VT_TO_LIST): Initialize new symbol using the psymbol bcache. * symmisc.c (print_partial_symbols): Now takes pointer to pointer to partial symbol. (print_symbol_bcache_statistics): New function to print per objfile bcache statistics. (print_partial_symbol, print_partial_symbols, maintenance_check_symtabs, extend_psymbol_list): Account for change to pointer to pointer to partial symbol. * symtab.c (find_pc_psymbol, lookup_partial_symbol, decode_line_2, make_symbol_completion_list): Account for change to pointer to pointer to partial symbol. * symtab.h (bcache.h): Include. * xcoffread.c (xcoff_start_psymtab): Make global_syms & static_syms type "partial_symbol **".
1996-02-16 22:14:47 +00:00
c-lang.c c-typeprint.c c-valprint.c ch-exp.c ch-lang.c \
ch-typeprint.c ch-valprint.c coffread.c command.c complaints.c \
corefile.c cp-valprint.c \
dbxread.c demangle.c dwarfread.c dwarf2read.c \
elfread.c environ.c eval.c expprint.c \
f-exp.y f-lang.c f-typeprint.c f-valprint.c findvar.c \
gdbtypes.c infcmd.c inflow.c infrun.c language.c \
java-exp.y java-lang.c java-valprint.c \
1993-06-23 22:59:35 +00:00
m2-exp.y m2-lang.c m2-typeprint.c m2-valprint.c main.c maint.c \
mem-break.c minsyms.c mipsread.c nlmread.c objfiles.c parse.c \
printcmd.c remote.c remote-nrom.c scm-exp.c scm-lang.c scm-valprint.c \
source.c stabsread.c stack.c symfile.c symmisc.c \
symtab.c target.c thread.c top.c \
typeprint.c utils.c \
valarith.c valops.c valprint.c values.c \
serial.c ser-unix.c mdebugread.c os9kread.c
1993-06-23 22:59:35 +00:00
LINTFILES = $(SFILES) $(YYFILES) init.c
1993-06-23 22:59:35 +00:00
# "system" headers. Using these in dependencies is a rather personal
# choice. (-rich, summer 1993)
# (Why would we not want to depend on them? If one of these changes in a
# non-binary-compatible way, it is a real pain to remake the right stuff
# without these dependencies -kingdon, 13 Mar 1994)
getopt_h = $(INCLUDE_DIR)/getopt.h
floatformat_h = $(INCLUDE_DIR)/floatformat.h
bfd_h = $(BFD_DIR)/bfd.h
wait_h = $(INCLUDE_DIR)/wait.h
dis-asm_h = $(INCLUDE_DIR)/dis-asm.h
remote-sim_h = $(INCLUDE_DIR)/remote-sim.h
1993-06-23 22:59:35 +00:00
dcache_h = dcache.h
remote_utils_h = $(dcache_h) serial.h target.h remote-utils.h $(remote-sim_h)
1993-06-23 22:59:35 +00:00
readline_headers = \
$(READLINE_SRC)/chardefs.h \
$(READLINE_SRC)/history.h \
$(READLINE_SRC)/keymaps.h \
$(READLINE_SRC)/readline.h
udiheaders = \
$(srcdir)/29k-share/udi/udiproc.h \
$(srcdir)/29k-share/udi/udiphcfg.h \
$(srcdir)/29k-share/udi/udiphunix.h \
$(srcdir)/29k-share/udi/udiptcfg.h \
$(srcdir)/29k-share/udi/udipt29k.h \
$(srcdir)/29k-share/udi/udisoc.h
1993-06-23 22:59:35 +00:00
gdbcore_h = gdbcore.h $(bfd_h)
frame_h = frame.h
* bcache.c, bcache.h: New files to implement a byte cache. * Makefile.in (SFILES): Add bcache.c. (symtab_h): Add bcache.h. (HFILES_NO_SRCDIR): add bcache.h (COMMON_OBJS): Add bcache.o (bcache.o): New target. * dbxread.c (start_psymtab): Make global_syms & static_syms type "partial_symbol **". * hpread.c (hpread_start_symtab): Ditto. * os9kread.c (os9k_start_psymtab): Ditto. * stabsread.h (start_psymtab): Ditto. * {symfile.c, symfile.h} (start_psymtab_common): Ditto. * maint.c (maintenance_print_statistics): Call print_symbol_bcache_statistics. * objfiles.c (allocate_objfile): Initialize psymbol bcache malloc and free pointers. * solib.c (allocate_rt_common_objfile): Ditto. * symfile.c (reread_symbols): Ditto. (free_objfile): Free psymbol bcache when objfile is freed. (objfile_relocate): Use new indirect psymbol pointers. * objfiles.h (struct objfile): Add psymbol cache. * symfile.c (compare_psymbols): Now passed pointers to pointers to psymbols. (reread_symbols): Free psymbol bcache when freeing other objfile resources. (add_psymbol_to_list, add_psymbol_addr_to_list): Initialize new psymbol using the psymbol bcache. (init_psymbol_list): Psymbol lists now contain pointers rather than the actual psymbols. * symfile.h (psymbol_allocation_list): Psymbol lists now dynamically grown arrays of pointers. (ADD_PSYMBOL_VT_TO_LIST): Initialize new symbol using the psymbol bcache. * symmisc.c (print_partial_symbols): Now takes pointer to pointer to partial symbol. (print_symbol_bcache_statistics): New function to print per objfile bcache statistics. (print_partial_symbol, print_partial_symbols, maintenance_check_symtabs, extend_psymbol_list): Account for change to pointer to pointer to partial symbol. * symtab.c (find_pc_psymbol, lookup_partial_symbol, decode_line_2, make_symbol_completion_list): Account for change to pointer to pointer to partial symbol. * symtab.h (bcache.h): Include. * xcoffread.c (xcoff_start_psymtab): Make global_syms & static_syms type "partial_symbol **".
1996-02-16 22:14:47 +00:00
symtab_h = symtab.h bcache.h
1993-06-23 22:59:35 +00:00
gdbtypes_h = gdbtypes.h
expression_h = expression.h
value_h = value.h $(symtab_h) $(gdbtypes_h) $(expression_h)
breakpoint_h = breakpoint.h $(frame_h) $(value_h)
command_h = command.h
gdbcmd_h = gdbcmd.h $(command_h)
defs_h = defs.h xm.h tm.h nm.h config.status config.h
1993-06-23 22:59:35 +00:00
inferior_h = inferior.h $(breakpoint_h)
# Header files that need to have srcdir added. Note that in the cases
# where we use a macro like $(gdbcmd_h), things are carefully arranged
# so that each .h file is listed exactly once (M-x tags-search works
# wrong if TAGS has files twice). Because this is tricky to get
# right, it is probably easiest just to list .h files here directly.
1993-06-23 22:59:35 +00:00
* bcache.c, bcache.h: New files to implement a byte cache. * Makefile.in (SFILES): Add bcache.c. (symtab_h): Add bcache.h. (HFILES_NO_SRCDIR): add bcache.h (COMMON_OBJS): Add bcache.o (bcache.o): New target. * dbxread.c (start_psymtab): Make global_syms & static_syms type "partial_symbol **". * hpread.c (hpread_start_symtab): Ditto. * os9kread.c (os9k_start_psymtab): Ditto. * stabsread.h (start_psymtab): Ditto. * {symfile.c, symfile.h} (start_psymtab_common): Ditto. * maint.c (maintenance_print_statistics): Call print_symbol_bcache_statistics. * objfiles.c (allocate_objfile): Initialize psymbol bcache malloc and free pointers. * solib.c (allocate_rt_common_objfile): Ditto. * symfile.c (reread_symbols): Ditto. (free_objfile): Free psymbol bcache when objfile is freed. (objfile_relocate): Use new indirect psymbol pointers. * objfiles.h (struct objfile): Add psymbol cache. * symfile.c (compare_psymbols): Now passed pointers to pointers to psymbols. (reread_symbols): Free psymbol bcache when freeing other objfile resources. (add_psymbol_to_list, add_psymbol_addr_to_list): Initialize new psymbol using the psymbol bcache. (init_psymbol_list): Psymbol lists now contain pointers rather than the actual psymbols. * symfile.h (psymbol_allocation_list): Psymbol lists now dynamically grown arrays of pointers. (ADD_PSYMBOL_VT_TO_LIST): Initialize new symbol using the psymbol bcache. * symmisc.c (print_partial_symbols): Now takes pointer to pointer to partial symbol. (print_symbol_bcache_statistics): New function to print per objfile bcache statistics. (print_partial_symbol, print_partial_symbols, maintenance_check_symtabs, extend_psymbol_list): Account for change to pointer to pointer to partial symbol. * symtab.c (find_pc_psymbol, lookup_partial_symbol, decode_line_2, make_symbol_completion_list): Account for change to pointer to pointer to partial symbol. * symtab.h (bcache.h): Include. * xcoffread.c (xcoff_start_psymtab): Make global_syms & static_syms type "partial_symbol **".
1996-02-16 22:14:47 +00:00
HFILES_NO_SRCDIR = bcache.h buildsym.h call-cmds.h coff-solib.h defs.h \
dst.h environ.h $(gdbcmd_h) gdbcore.h \
gcc -Wall lint: * breakpoint.c (watchpoint_check): Remove unused variable b. * stack.c (print_frame_info): Move sp and buf inside #if. * eval.c (evaluate_subexp): Remove unused variables pp, mangle_ptr, ptr, and mangle_tstr. * valarith.c (value_x_binop): Remove unused variables mangle_tstr and mangle_ptr. * symtab.c (lookup_symtab): Put variable copy inside #if. (decode_line_1): Put variable q1 inside #if 0. * target.h: Declare target_link. * infrun.c (wait_for_inferior): Remove unused variables signame. * remote.c (remote_resume): Remove unused variable name. * c-exp.y (parse_number): Parenthesize operand of shift. * dbxread.c (record_minimal_symbol): Parenthesize operand of && (this is a semantic change, the warning seems to have detected a bug). * dbxread.c (end_psymtab): Move variable p1 inside #if. * coffread.c: Move variable temptype inside #if. * ch-typeprint.c (chill_type_print_base): Remove unused variable name. * ch-valprint.c: #include typeprint.h and ch-lang.h. (chill_val_print): Remove unused variable in_range. (chill_val_print): Remove statement "length > TYPE_LENGTH (type);". (chill_val_print): Add default case for switch. * stabsread.h: Declare stabsect_build_psymtabs. * os9kread.c (read_minimal_symbols): Make this return void. (os9k_symfile_read): Remove unused variables stb_exist and val. (os9k_symfile_init): Remove unused variable val. (fill_sym): Remove unused variable id. (read_os9k_psymtab): Put variable back_to inside #if 0. Remove unused variable nsl. Remove unused variable symfile_bfd. #if 0 unused variables lbrac_unmatched_complaint and lbrac_mismatch_complaint. Remove declaration for non-existent function os9k_next_symbol_text. * annotate.c, annotate.h: New files, containing a function for each annotation which outputs it. * Move breakpoints_changed from breakpoint.c to annotate.c. * breakpoint.c, blockframe.c, infrun.c, cp-valprint.c, main.c, printcmd.c, source.c, stack.c, utils.c, valprint.c: Use annotate.c functions to output annotations. * Makefile.in (OBS): Add annotate.o.
1994-05-13 18:18:57 +00:00
gdb-stabs.h $(inferior_h) language.h minimon.h monitor.h \
1993-06-23 22:59:35 +00:00
objfiles.h parser-defs.h partial-stab.h serial.h signals.h solib.h \
symfile.h stabsread.h target.h terminal.h typeprint.h xcoffsolib.h \
c-lang.h ch-lang.h f-lang.h java-lang.h m2-lang.h \
complaints.h valprint.h \
1993-06-23 22:59:35 +00:00
29k-share/udi/udiids.h 29k-share/udi_soc nindy-share/b.out.h \
nindy-share/block_io.h nindy-share/coff.h \
nindy-share/env.h nindy-share/stop.h \
1993-06-23 22:59:35 +00:00
vx-share/dbgRpcLib.h vx-share/ptrace.h vx-share/vxTypes.h \
vx-share/vxWorks.h vx-share/wait.h vx-share/xdr_ld.h \
vx-share/xdr_ptrace.h vx-share/xdr_rdb.h gdbthread.h \
dcache.h remote-utils.h top.h somsolib.h
gcc -Wall lint: * breakpoint.c (watchpoint_check): Remove unused variable b. * stack.c (print_frame_info): Move sp and buf inside #if. * eval.c (evaluate_subexp): Remove unused variables pp, mangle_ptr, ptr, and mangle_tstr. * valarith.c (value_x_binop): Remove unused variables mangle_tstr and mangle_ptr. * symtab.c (lookup_symtab): Put variable copy inside #if. (decode_line_1): Put variable q1 inside #if 0. * target.h: Declare target_link. * infrun.c (wait_for_inferior): Remove unused variables signame. * remote.c (remote_resume): Remove unused variable name. * c-exp.y (parse_number): Parenthesize operand of shift. * dbxread.c (record_minimal_symbol): Parenthesize operand of && (this is a semantic change, the warning seems to have detected a bug). * dbxread.c (end_psymtab): Move variable p1 inside #if. * coffread.c: Move variable temptype inside #if. * ch-typeprint.c (chill_type_print_base): Remove unused variable name. * ch-valprint.c: #include typeprint.h and ch-lang.h. (chill_val_print): Remove unused variable in_range. (chill_val_print): Remove statement "length > TYPE_LENGTH (type);". (chill_val_print): Add default case for switch. * stabsread.h: Declare stabsect_build_psymtabs. * os9kread.c (read_minimal_symbols): Make this return void. (os9k_symfile_read): Remove unused variables stb_exist and val. (os9k_symfile_init): Remove unused variable val. (fill_sym): Remove unused variable id. (read_os9k_psymtab): Put variable back_to inside #if 0. Remove unused variable nsl. Remove unused variable symfile_bfd. #if 0 unused variables lbrac_unmatched_complaint and lbrac_mismatch_complaint. Remove declaration for non-existent function os9k_next_symbol_text. * annotate.c, annotate.h: New files, containing a function for each annotation which outputs it. * Move breakpoints_changed from breakpoint.c to annotate.c. * breakpoint.c, blockframe.c, infrun.c, cp-valprint.c, main.c, printcmd.c, source.c, stack.c, utils.c, valprint.c: Use annotate.c functions to output annotations. * Makefile.in (OBS): Add annotate.o.
1994-05-13 18:18:57 +00:00
# Header files that already have srcdir in them, or which are in objdir.
gcc -Wall lint: * breakpoint.c (watchpoint_check): Remove unused variable b. * stack.c (print_frame_info): Move sp and buf inside #if. * eval.c (evaluate_subexp): Remove unused variables pp, mangle_ptr, ptr, and mangle_tstr. * valarith.c (value_x_binop): Remove unused variables mangle_tstr and mangle_ptr. * symtab.c (lookup_symtab): Put variable copy inside #if. (decode_line_1): Put variable q1 inside #if 0. * target.h: Declare target_link. * infrun.c (wait_for_inferior): Remove unused variables signame. * remote.c (remote_resume): Remove unused variable name. * c-exp.y (parse_number): Parenthesize operand of shift. * dbxread.c (record_minimal_symbol): Parenthesize operand of && (this is a semantic change, the warning seems to have detected a bug). * dbxread.c (end_psymtab): Move variable p1 inside #if. * coffread.c: Move variable temptype inside #if. * ch-typeprint.c (chill_type_print_base): Remove unused variable name. * ch-valprint.c: #include typeprint.h and ch-lang.h. (chill_val_print): Remove unused variable in_range. (chill_val_print): Remove statement "length > TYPE_LENGTH (type);". (chill_val_print): Add default case for switch. * stabsread.h: Declare stabsect_build_psymtabs. * os9kread.c (read_minimal_symbols): Make this return void. (os9k_symfile_read): Remove unused variables stb_exist and val. (os9k_symfile_init): Remove unused variable val. (fill_sym): Remove unused variable id. (read_os9k_psymtab): Put variable back_to inside #if 0. Remove unused variable nsl. Remove unused variable symfile_bfd. #if 0 unused variables lbrac_unmatched_complaint and lbrac_mismatch_complaint. Remove declaration for non-existent function os9k_next_symbol_text. * annotate.c, annotate.h: New files, containing a function for each annotation which outputs it. * Move breakpoints_changed from breakpoint.c to annotate.c. * breakpoint.c, blockframe.c, infrun.c, cp-valprint.c, main.c, printcmd.c, source.c, stack.c, utils.c, valprint.c: Use annotate.c functions to output annotations. * Makefile.in (OBS): Add annotate.o.
1994-05-13 18:18:57 +00:00
HFILES_WITH_SRCDIR = $(udiheaders) ../bfd/bfd.h
# GDB "info" files, which should be included in their entirety
INFOFILES = gdb.info*
REMOTE_EXAMPLES = m68k-stub.c i386-stub.c sparc-stub.c rem-multi.shar
POSSLIBS = gnu-regex.c gnu-regex.h
# {X,T,NAT}DEPFILES are something of a pain in that it's hard to
# default their values the way we do for SER_HARDWIRE; in the future
# maybe much of the stuff now in {X,T,NAT}DEPFILES will go into other
# variables analogous to SER_HARDWIRE which get defaulted in this
# Makefile.in
DEPFILES = $(TDEPFILES) $(XDEPFILES) $(SER_HARDWIRE) $(NATDEPFILES) \
$(REMOTE_OBS) $(SIM_OBS) @CONFIG_OBS@
SOURCES = $(SFILES) $(ALLDEPFILES) $(YYFILES)
# Don't include YYFILES (*.tab.c) because we already include *.y in SFILES,
# and it's more useful to see it in the .y file.
TAGFILES_NO_SRCDIR = $(SFILES) $(HFILES_NO_SRCDIR) $(ALLDEPFILES) \
$(POSSLIBS)
TAGFILES_WITH_SRCDIR = $(HFILES_WITH_SRCDIR)
1993-06-23 22:59:35 +00:00
COMMON_OBS = version.o blockframe.o breakpoint.o findvar.o stack.o thread.o \
1993-06-23 22:59:35 +00:00
source.o values.o eval.o valops.o valarith.o valprint.o printcmd.o \
symtab.o symfile.o symmisc.o infcmd.o infrun.o command.o \
expprint.o environ.o gdbtypes.o copying.o $(DEPFILES) \
mem-break.o target.o parse.o language.o $(YYOBJ) buildsym.o \
* bcache.c, bcache.h: New files to implement a byte cache. * Makefile.in (SFILES): Add bcache.c. (symtab_h): Add bcache.h. (HFILES_NO_SRCDIR): add bcache.h (COMMON_OBJS): Add bcache.o (bcache.o): New target. * dbxread.c (start_psymtab): Make global_syms & static_syms type "partial_symbol **". * hpread.c (hpread_start_symtab): Ditto. * os9kread.c (os9k_start_psymtab): Ditto. * stabsread.h (start_psymtab): Ditto. * {symfile.c, symfile.h} (start_psymtab_common): Ditto. * maint.c (maintenance_print_statistics): Call print_symbol_bcache_statistics. * objfiles.c (allocate_objfile): Initialize psymbol bcache malloc and free pointers. * solib.c (allocate_rt_common_objfile): Ditto. * symfile.c (reread_symbols): Ditto. (free_objfile): Free psymbol bcache when objfile is freed. (objfile_relocate): Use new indirect psymbol pointers. * objfiles.h (struct objfile): Add psymbol cache. * symfile.c (compare_psymbols): Now passed pointers to pointers to psymbols. (reread_symbols): Free psymbol bcache when freeing other objfile resources. (add_psymbol_to_list, add_psymbol_addr_to_list): Initialize new psymbol using the psymbol bcache. (init_psymbol_list): Psymbol lists now contain pointers rather than the actual psymbols. * symfile.h (psymbol_allocation_list): Psymbol lists now dynamically grown arrays of pointers. (ADD_PSYMBOL_VT_TO_LIST): Initialize new symbol using the psymbol bcache. * symmisc.c (print_partial_symbols): Now takes pointer to pointer to partial symbol. (print_symbol_bcache_statistics): New function to print per objfile bcache statistics. (print_partial_symbol, print_partial_symbols, maintenance_check_symtabs, extend_psymbol_list): Account for change to pointer to pointer to partial symbol. * symtab.c (find_pc_psymbol, lookup_partial_symbol, decode_line_2, make_symbol_completion_list): Account for change to pointer to pointer to partial symbol. * symtab.h (bcache.h): Include. * xcoffread.c (xcoff_start_psymtab): Make global_syms & static_syms type "partial_symbol **".
1996-02-16 22:14:47 +00:00
exec.o bcache.o objfiles.o minsyms.o maint.o demangle.o \
dbxread.o coffread.o elfread.o \
dwarfread.o dwarf2read.o mipsread.o stabsread.o corefile.o \
c-lang.o ch-exp.o ch-lang.o f-lang.o \
java-lang.o java-valprint.o m2-lang.o \
scm-exp.o scm-lang.o scm-valprint.o complaints.o typeprint.o \
c-typeprint.o ch-typeprint.o f-typeprint.o m2-typeprint.o \
c-valprint.o cp-valprint.o ch-valprint.o f-valprint.o m2-valprint.o \
nlmread.o serial.o mdebugread.o os9kread.o top.o utils.o
OBS = $(COMMON_OBS) $(ANNOTATE_OBS) main.o
LIBGDB_OBS =
TSOBS = inflow.o
NTSOBS = standalone.o
NTSSTART = kdb-start.o
* Makefile.in (SUBDIRS): Add mswin so that make cleanup cleans up that directory. * defs.h utils.c (error warning): Make message be const. * main.c (fputs_unfiltered): Only send gdb_stdout and gdb_stderr to hook. Otherwise send it to fputs. * monitor.c monitor.h (monitor_get_dev_name): New function. Does the obvious. * remote-e7000.c: Remove debugify stuff. Change printf, fprintf to _filtered forms to make output appear in GUIs. Replace all uses of SERIAL_READCHAR with readchar, which has better error checking. * (e7000_parse_device): Add prototype. * (readchar): Improve doc. Handle random serial errors. * (expect): Disable notice_quit code. It's busted. Remove serial error handling (it's now handled in readchar). Remove remote_debug echoing. That's handled in readchar as well. * (e7000_parse_device): Remove serial_flag arg. It's not necessary. * (e7000_open): Split into two pieces. Second part is e7000_start_remote, and is error protected. Now, when we connect to the target, we setup the initial frame and registers so that the user gets an immediate indication of where the target is. * (gch): Remove debug output. That's handled by readchar. * (e7000_read_inferior_memory): Handle errors better. * (_initialize_remote_e7000): Get rid of `<xxx>' things from command names. They show up when doing completion and confuse things horribly. * ser-e7kpc.c: Remove the last seven months of brain damage. Get rid of the DLL's since we can access the device directly from Win32s and Win95. Get rid of debugify crud. * serial.c: Remove debugify cruft. * (serial_logchar serial_log_command serial_write serial_readchar serial_send_break serial_close): Merge common functionality into serial_logchar. Clean up rest of routines. * sparclet-rom.c: Disembowel. Leave only download routine. Download routine now switches to remote target automatically. * top.c (disconnect): Only define if SIGHUP is defined. Cleans up MSVC/Win32 problem. * utils.c (gdb_flush): Don't call hook unless it's for gdb_stdout or gdb_stderr. * config/sh/tm-sh.h: Define TARGET_SH for WinGDB. * config/sparc/tm-sparclet.h: Remove override for prompt.
1997-04-19 01:42:34 +00:00
SUBDIRS = doc testsuite nlm mswin
# For now, shortcut the "configure GDB for fewer languages" stuff.
YYFILES = c-exp.tab.c java-exp.tab.c f-exp.tab.c m2-exp.tab.c
YYOBJ = c-exp.tab.o java-exp.tab.o f-exp.tab.o m2-exp.tab.o
# Things which need to be built when making a distribution.
DISTSTUFF = $(YYFILES)
# Prevent Sun make from putting in the machine type. Setting
# TARGET_ARCH to nothing works for SunOS 3, 4.0, but not for 4.1.
.c.o:
1993-06-23 22:59:35 +00:00
$(CC) -c $(INTERNAL_CFLAGS) $<
all: gdb
1993-05-01 00:34:05 +00:00
@$(MAKE) $(FLAGS_TO_PASS) DO=all "DODIRS=`echo $(SUBDIRS) | sed 's/testsuite//'`" subdir_do
1993-03-03 03:15:52 +00:00
1993-03-23 08:03:44 +00:00
installcheck:
# The check target can not use subdir_do, because subdir_do does not
# use TARGET_FLAGS_TO_PASS.
1993-03-17 09:05:19 +00:00
check: force
@if [ -f testsuite/Makefile ]; then \
rootme=`pwd`; export rootme; \
rootsrc=`cd $(srcdir); pwd`; export rootsrc; \
cd testsuite; \
$(MAKE) $(TARGET_FLAGS_TO_PASS) check; \
else true; fi
1993-06-23 22:59:35 +00:00
info dvi install-info clean-info: force
1993-05-01 00:34:05 +00:00
@$(MAKE) $(FLAGS_TO_PASS) DO=$@ "DODIRS=$(SUBDIRS)" subdir_do
gdb.z:gdb.1
nroff -man $(srcdir)/gdb.1 | col -b > gdb.t
pack gdb.t ; rm -f gdb.t
mv gdb.t.z gdb.z
1993-06-24 23:16:00 +00:00
1993-06-23 22:59:35 +00:00
# Traditionally "install" depends on "all". But it may be useful
# not to; for example, if the user has made some trivial change to a
# source file and doesn't care about rebuilding or just wants to save the
# time it takes for make to check that all is up to date.
1993-06-23 22:59:35 +00:00
# install-only is intended to address that need.
install: all install-only
install-only:
transformed_name=`t='$(program_transform_name)'; \
1995-09-20 17:24:12 +00:00
echo gdb | sed -e $$t` ; \
if test "x$$transformed_name" = x; then \
transformed_name=gdb ; \
else \
true ; \
fi ; \
$(INSTALL_PROGRAM) gdb $(bindir)/$$transformed_name ; \
$(INSTALL_DATA) $(srcdir)/gdb.1 $(man1dir)/$$transformed_name.1
# start-sanitize-gdbtk
if [ x"$(ENABLE_GDBTK)" != x ] ; then \
if [ ! -d $(datadir)/gdbtcl ]; then \
echo "Making directory gdbtcl"; \
mkdir $(datadir)/gdbtcl; \
chmod 755 $(datadir)/gdbtcl; \
fi ; \
cd $(srcdir)/gdbtcl ; \
for i in asm.tcl break.xbm breakpoint.tcl command.tcl copyright.tcl expr.tcl file.tcl main.tcl register.tcl source.tcl stop2.gif tclIndex ; \
do \
$(INSTALL_DATA) $$i $(datadir)/gdbtcl/$$i ; \
done ; \
else \
true ; \
fi
# end-sanitize-gdbtk
1993-06-23 22:59:35 +00:00
@$(MAKE) DO=install "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS) subdir_do
1993-06-23 22:59:35 +00:00
uninstall: force
transformed_name=`t='$(program_transform_name)'; \
1995-09-20 17:24:12 +00:00
echo gdb | sed -e $$t` ; \
if test "x$$transformed_name" = x; then \
transformed_name=gdb ; \
else \
true ; \
fi ; \
rm -f $(bindir)/$$transformed_name $(man1dir)/$$transformed_name.1
1993-06-23 22:59:35 +00:00
@$(MAKE) DO=uninstall "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS) subdir_do
# We do this by grepping through sources. If that turns out to be too slow,
# maybe we could just require every .o file to have an initialization routine
# of a given name (remote-udi.o -> _initialize_remote_udi, etc.).
#
# Formatting conventions: The name of the _initialize_* routines must start
# in column zero, and must not be inside #if.
#
# Note that the set of files with init functions might change, or the names
# of the functions might change, so this files needs to depend on all the
# object files that will be linked into gdb.
init.c: $(OBS) $(TSOBS)
@echo Making init.c
@rm -f init.c-tmp
@echo '/* Do not modify this file. */' >init.c-tmp
@echo '/* It is created automatically by the Makefile. */'>>init.c-tmp
* Makefile.in: Add mswin to SUBDIRS. Add rules for mswin/libwingdb.a and remote-wiggler.o. * breakpoint.c (breakpoint_here_p): Clean up bp enabled test. * (breakpoint_inserted_here_p): New func, just like breakpoint_here_p, except it's honest. Honestly. * breakpoint.h: Proto for above. start-sanitize-gdbtk * configure configure.in: Add host *windows* to list of hosts that don't support GDBtk. end-sanitize-gdbtk * configure configure.in: Add mswin to configdirs if host is i[3456]86-*-windows. * core-aout.c (fetch_core_registers register_addr) gdbcore.h: Change all vars that can contain addresses to type CORE_ADDR. * findvar.c (supply_register): Allow val to be NULL. This means that regno is unsupported. * (read_pc read_pc_pid write_pc write_pc_pid): Make non-pid forms just call pid forms with inferior_pid so that there's only once place to hack PC's and such. * infrun.c (proceed): Don't skip breakpoints if user changed PC. * remote-wiggler.c: New file. Support for BDM interface from Macraigor Systems. * serial.c: Enhance serial logging capability. Add hex and octal output modes (set remotelogbase {hex|octal|ascii}. Also log breaks, timeouts, errors, and eofs. * serial.h: Redefine SERIAL_SEND_BREAK to go through a wrapper function so that we can log breaks. Don't export serial_logfile or serial_logfp. * top.c (execute_command): Don't test for serial_logfp here. Just call serial_log_comand, and let serial.c sort it out. * valops.c (value_of_variable): Don't attempt to establish frames for static and global variables. This makes things work a bit better if the stack or frame pointer is trashed. * config/m68k/monitor.mt (TDEPFILES): Add remote-wiggler.o. * config/m68k/tm-m68k.h: Define STACK_ALIGN. CPU32 can't hack misaligned stacks during function calls.
1996-09-05 01:01:05 +00:00
@echo '#include "ansidecl.h"' >>init.c-tmp
@echo 'extern void initialize_all_files PARAMS ((void));' >>init.c-tmp
@echo 'void initialize_all_files PARAMS ((void)) {' >>init.c-tmp
* Makefile.in: Add rule for hpux-thread.o (needs special header files). * (SUBDIRS): Remove mswin. * Change procedure for creating init.c. Speeds things up quite a bit. * config.in configure configure.in: Check for select, poll. * Check for OSF header files before including hpux-thread.o. * Don't configure doc or testsuite when building under MSVC. * findvar.c value.h (read_register_pid write_register_pid): Make global. Needed for hppa-tdep.c. * (supply_register): Don't set pid to inferior_pid when supplying registers. * hppa-tdep.c (saved_pc_after_call): frame_saved_pc -> FRAME_SAVED_PC. * (frame_saved_pc): Change name to hppa_frame_saved_pc. * (hppa_pop_frame): Don't use a pid of 0 with target_write_pc. Use write_pc instead, which uses the correct pid. * (target_read_pc target_write_pc): Use read/write_register_pid instead of read/write_register to preserve the pid passed in. * inftarg.c (child_can_run): Add flag child_suppress_run to allow hpux-threads.c to override this as a runnable target. * config/pa/nm-hppah.h: Define target_new_objfile and target_pid_to_str. * config/pa/tm-hppa.h (FRAME_SAVED_PC): Use hppa_frame_saved_pc instead of frame_saved_pc. * config/m68k/tm-m68k.h: Define TARGET_M68K for Wingdb. * config/m68k/tm-monitor.h: Use FRAME_CHAIN_VALID_ALTERNATE, since we can't easily determine the start file bounds with ELF. * config/mips/tm-mips.h: Define TARGET_MIPS for Wingdb. * hpux-thread.c: New file for HPUX/OSF thread support. * osf-share/{README AT386/cma_thread_io.h HP800/cma_thread_io.h RIOS/cma_thread_io.h cma_attr.h cma_deb_core.h cma_debug_client.h cma_errors.h cma_handle.h cma_init.h cma_list.h cma_mutex.h cma_sched.h cma_semaphore_defs.h cma_sequence.h cma_stack.h cma_stack_int.h cma_tcb_defs.h cma_util.h}: New files for OSF thread support.
1996-10-08 17:06:17 +00:00
@echo $(OBS) $(TSOBS) | \
tr ' ' '\012' | \
sed -e '/^Onindy.o/d' \
-e '/^nindy.o/d' \
-e '/ttyflush.o/d' \
-e '/xdr_ld.o/d' \
-e '/xdr_ptrace.o/d' \
-e '/xdr_rdb.o/d' \
-e '/udr.o/d' \
-e '/udip2soc.o/d' \
-e '/udi2go32.o/d' \
-e '/version.o/d' \
-e '/^[a-z0-9A-Z_]*_[SU].o/d' \
-e '/[a-z0-9A-Z_]*-exp.tab.o/d' \
* Makefile.in: Add rule for hpux-thread.o (needs special header files). * (SUBDIRS): Remove mswin. * Change procedure for creating init.c. Speeds things up quite a bit. * config.in configure configure.in: Check for select, poll. * Check for OSF header files before including hpux-thread.o. * Don't configure doc or testsuite when building under MSVC. * findvar.c value.h (read_register_pid write_register_pid): Make global. Needed for hppa-tdep.c. * (supply_register): Don't set pid to inferior_pid when supplying registers. * hppa-tdep.c (saved_pc_after_call): frame_saved_pc -> FRAME_SAVED_PC. * (frame_saved_pc): Change name to hppa_frame_saved_pc. * (hppa_pop_frame): Don't use a pid of 0 with target_write_pc. Use write_pc instead, which uses the correct pid. * (target_read_pc target_write_pc): Use read/write_register_pid instead of read/write_register to preserve the pid passed in. * inftarg.c (child_can_run): Add flag child_suppress_run to allow hpux-threads.c to override this as a runnable target. * config/pa/nm-hppah.h: Define target_new_objfile and target_pid_to_str. * config/pa/tm-hppa.h (FRAME_SAVED_PC): Use hppa_frame_saved_pc instead of frame_saved_pc. * config/m68k/tm-m68k.h: Define TARGET_M68K for Wingdb. * config/m68k/tm-monitor.h: Use FRAME_CHAIN_VALID_ALTERNATE, since we can't easily determine the start file bounds with ELF. * config/mips/tm-mips.h: Define TARGET_MIPS for Wingdb. * hpux-thread.c: New file for HPUX/OSF thread support. * osf-share/{README AT386/cma_thread_io.h HP800/cma_thread_io.h RIOS/cma_thread_io.h cma_attr.h cma_deb_core.h cma_debug_client.h cma_errors.h cma_handle.h cma_init.h cma_list.h cma_mutex.h cma_sched.h cma_semaphore_defs.h cma_sequence.h cma_stack.h cma_stack_int.h cma_tcb_defs.h cma_util.h}: New files for OSF thread support.
1996-10-08 17:06:17 +00:00
-e 's/\.o/.c/' \
-e 's|\([^ ][^ ]*\)|$(srcdir)/\1|g' | \
xargs grep '^_initialize_[a-z_0-9A-Z]* *(' | \
sed -e 's/^.*://' -e 's/^\([a-z_0-9A-Z]*\).*/ {extern void \1 PARAMS ((void)); \1 ();}/' >>init.c-tmp
@echo '}' >>init.c-tmp
@mv init.c-tmp init.c
1993-06-23 22:59:35 +00:00
.PRECIOUS: init.c
# Removing the old gdb first works better if it is running, at least on SunOS.
gdb: $(OBS) $(TSOBS) $(ADD_DEPS) $(CDEPS) init.o
rm -f gdb
* Makefile.in: Add rule for hpux-thread.o (needs special header files). * (SUBDIRS): Remove mswin. * Change procedure for creating init.c. Speeds things up quite a bit. * config.in configure configure.in: Check for select, poll. * Check for OSF header files before including hpux-thread.o. * Don't configure doc or testsuite when building under MSVC. * findvar.c value.h (read_register_pid write_register_pid): Make global. Needed for hppa-tdep.c. * (supply_register): Don't set pid to inferior_pid when supplying registers. * hppa-tdep.c (saved_pc_after_call): frame_saved_pc -> FRAME_SAVED_PC. * (frame_saved_pc): Change name to hppa_frame_saved_pc. * (hppa_pop_frame): Don't use a pid of 0 with target_write_pc. Use write_pc instead, which uses the correct pid. * (target_read_pc target_write_pc): Use read/write_register_pid instead of read/write_register to preserve the pid passed in. * inftarg.c (child_can_run): Add flag child_suppress_run to allow hpux-threads.c to override this as a runnable target. * config/pa/nm-hppah.h: Define target_new_objfile and target_pid_to_str. * config/pa/tm-hppa.h (FRAME_SAVED_PC): Use hppa_frame_saved_pc instead of frame_saved_pc. * config/m68k/tm-m68k.h: Define TARGET_M68K for Wingdb. * config/m68k/tm-monitor.h: Use FRAME_CHAIN_VALID_ALTERNATE, since we can't easily determine the start file bounds with ELF. * config/mips/tm-mips.h: Define TARGET_MIPS for Wingdb. * hpux-thread.c: New file for HPUX/OSF thread support. * osf-share/{README AT386/cma_thread_io.h HP800/cma_thread_io.h RIOS/cma_thread_io.h cma_attr.h cma_deb_core.h cma_debug_client.h cma_errors.h cma_handle.h cma_init.h cma_list.h cma_mutex.h cma_sched.h cma_semaphore_defs.h cma_sequence.h cma_stack.h cma_stack_int.h cma_tcb_defs.h cma_util.h}: New files for OSF thread support.
1996-10-08 17:06:17 +00:00
$(HLDENV) $(CC_LD) $(INTERNAL_LDFLAGS) -o gdb \
init.o $(OBS) $(TSOBS) $(ADD_FILES) $(CLIBS) $(LOADLIBES)
nlm: force
rootme=`pwd`; export rootme; $(MAKE) $(TARGET_FLAGS_TO_PASS) DO=all DODIRS=nlm subdir_do
libgdb: libgdb-files $(LIBGDB_OBS)
# libproc is not listed here because all-libproc is a dependency of all-gui,
# not all-gdb, and thus might be built after us.
LIBGDBDEPS=$(COMMON_OBS) $(LIBGDB_OBS) $(TSOBS) $(ADD_DEPS) $(CDEPS) init.o
# libproc needs to be before libiberty for alloca.
LIBGDBFILES=$(COMMON_OBS) $(LIBGDB_OBS) $(TSOBS) ../libproc/libproc.a \
$(ADD_DEPS) $(CDEPS) init.o
libgdb-files: $(LIBGDBDEPS) Makefile.in
-rm -f libgdb-files
for i in $(LIBGDBFILES); do\
echo $$i >> libgdb-files;\
done
saber_gdb: $(SFILES) $(DEPFILES) copying.c version.c
1993-06-23 22:59:35 +00:00
#setopt load_flags $(CFLAGS) $(BFD_CFLAGS) -DHOST_SYS=SUN4_SYS
#load ./init.c $(SFILES)
#unload $(srcdir)/c-exp.y $(srcdir)/java-exp.y $(srcdir)/m2-exp.y
1993-06-23 22:59:35 +00:00
#unload vx-share/*.h
#unload nindy-share/[A-Z]*
#load c-exp.tab.c java-exp.tab.c m2-exp.tab.c
#load copying.c version.c
#load ../opcodes/libopcodes.a
#load ../libiberty/libiberty.a
#load ../bfd/libbfd.a
#load ../readline/libreadline.a
#load ../mmalloc/libmmalloc.a
#load -ltermcap
#load `echo " "$(DEPFILES) | sed -e 's/\.o/.c/g' -e 's, , ../,g'`
echo "Load .c corresponding to:" $(DEPFILES)
# A Mach 3.0 program to force gdb back to command level
stop-gdb: stop-gdb.o
${CC_LD} $(GLOBAL_CFLAGS) $(LDFLAGS) -o stop-gdb \
stop-gdb.o $(CLIBS) $(LOADLIBES)
# This is useful when debugging GDB, because some Unix's don't let you run GDB
# on itself without copying the executable. So "make gdb1" will make
# gdb and put a copy in gdb1, and you can run it with "gdb gdb1".
# Removing gdb1 before the copy is the right thing if gdb1 is open
# in another process.
gdb1: gdb
rm -f gdb1
cp gdb gdb1
1993-06-23 22:59:35 +00:00
### fixme - this can't be right.
# This checks the configure.in file versus the config/ directory.
config-check: config-check-hosts config-check-targets
config-check-hosts:
1993-06-23 22:59:35 +00:00
grep gdb_host= $(srcdir)/configure.in | \
sed -e 's/.*gdb_host=//' -e 's/ ;;$$/.mh/' | sort -u >HOSTconf.o
1993-06-23 22:59:35 +00:00
(cd $(srcdir)/config; ls *.mh) >HOSTdir.o
diff -u HOSTconf.o HOSTdir.o
1993-06-23 22:59:35 +00:00
### fixme - nor can this.
config-check-targets:
1993-06-23 22:59:35 +00:00
grep gdb_target= $(srcdir)/configure.in | \
sed -e 's/.*gdb_target=//' -e 's/ ;;$$/.mh/' | sort -u >TARGconf.o
1993-06-23 22:59:35 +00:00
(cd $(srcdir)/config; ls *.mt) >TARGdir.o
diff -u HOSTconf.o HOSTdir.o
1993-06-23 22:59:35 +00:00
# FIXME. These are not generated by "make depend" because they only are there
# for some machines.
# But these rules don't do what we want; we want to hack the foo.o: tm.h
# dependency to do the right thing.
tm-isi.h tm-sun3.h tm-news.h tm-hp300bsd.h tm-altos.h: tm-m68k.h
tm-hp300hpux.h tm-sun2.h tm-3b1.h: tm-m68k.h
xm-news1000.h: xm-news.h
xm-i386-sv32.h: xm-i386.h
tm-i386gas.h: tm-i386.h
xm-sun4os4.h: xm-sparc.h
tm-sun4os4.h: tm-sparc.h
xm-vaxult.h: xm-vax.h
xm-vaxbsd.h: xm-vax.h
1993-06-23 22:59:35 +00:00
kdb: $(NTSSTART) $(OBS) $(NTSOBS) $(ADD_DEPS) $(CDEPS)
ld -o kdb $(NTSSTART) $(OBS) $(NTSOBS) init.o $(ADD_FILES) \
-lc $(CLIBS)
1993-04-30 18:06:32 +00:00
# Put the proper machine-specific files first, so M-. on a machine
# specific routine gets the one for the correct machine. (FIXME: those
# files go in twice; we should be removing them from the main list).
# TAGS depends on all the files that go into it so you can rebuild TAGS
# with `make TAGS' and not have to say `rm TAGS' first.
TAGS: $(TAGFILES_NO_SRCDIR) $(TAGFILES_WITH_SRCDIR)
@echo Making TAGS
@etags $(srcdir)/$(TM_FILE) \
$(srcdir)/$(XM_FILE) \
$(srcdir)/$(NAT_FILE) \
`(for i in $(DEPFILES) $(TAGFILES_NO_SRCDIR); do \
1993-06-23 22:59:35 +00:00
echo $(srcdir)/$$i ; \
done ; for i in $(TAGFILES_WITH_SRCDIR); do \
echo $$i ; \
done) | sed -e 's/\.o$$/\.c/'` \
`find $(srcdir)/config -name '*.h' -print`
1993-06-23 22:59:35 +00:00
tags: TAGS
1994-01-16 17:47:47 +00:00
clean mostlyclean:
@$(MAKE) $(FLAGS_TO_PASS) DO=clean "DODIRS=$(SUBDIRS)" subdir_do
rm -f *.o $(ADD_FILES) *~ init.c-tmp
rm -f init.c version.c
rm -f gdb core make.log libgdb-files
rm -f gdb[0-9]
# This used to depend on c-exp.tab.c m2-exp.tab.c TAGS
# I believe this is wrong; the makefile standards for distclean just
# describe removing files; the only sort of "re-create a distribution"
# functionality described is if the distributed files are unmodified.
distclean: clean
@$(MAKE) $(FLAGS_TO_PASS) DO=distclean "DODIRS=$(SUBDIRS)" subdir_do
rm -f nm.h tm.h xm.h config.status config.h stamp-h .gdbinit
rm -f y.output yacc.acts yacc.tmp y.tab.h
rm -f config.log config.cache
1993-06-23 22:59:35 +00:00
rm -f Makefile
maintainer-clean realclean: distclean clean
1995-09-20 17:24:12 +00:00
@echo "This command is intended for maintainers to use;"
@echo "it deletes files that may require special tools to rebuild."
@$(MAKE) $(FLAGS_TO_PASS) DO=maintainer-clean "DODIRS=$(SUBDIRS)" subdir_do
rm -f c-exp.tab.c java-exp.tab.c f-exp.tab.c m2-exp.tab.c
rm -f TAGS $(INFOFILES)
rm -f nm.h tm.h xm.h config.status
diststuff: $(DISTSTUFF)
* bcache.c, bcache.h: New files to implement a byte cache. * Makefile.in (SFILES): Add bcache.c. (symtab_h): Add bcache.h. (HFILES_NO_SRCDIR): add bcache.h (COMMON_OBJS): Add bcache.o (bcache.o): New target. * dbxread.c (start_psymtab): Make global_syms & static_syms type "partial_symbol **". * hpread.c (hpread_start_symtab): Ditto. * os9kread.c (os9k_start_psymtab): Ditto. * stabsread.h (start_psymtab): Ditto. * {symfile.c, symfile.h} (start_psymtab_common): Ditto. * maint.c (maintenance_print_statistics): Call print_symbol_bcache_statistics. * objfiles.c (allocate_objfile): Initialize psymbol bcache malloc and free pointers. * solib.c (allocate_rt_common_objfile): Ditto. * symfile.c (reread_symbols): Ditto. (free_objfile): Free psymbol bcache when objfile is freed. (objfile_relocate): Use new indirect psymbol pointers. * objfiles.h (struct objfile): Add psymbol cache. * symfile.c (compare_psymbols): Now passed pointers to pointers to psymbols. (reread_symbols): Free psymbol bcache when freeing other objfile resources. (add_psymbol_to_list, add_psymbol_addr_to_list): Initialize new psymbol using the psymbol bcache. (init_psymbol_list): Psymbol lists now contain pointers rather than the actual psymbols. * symfile.h (psymbol_allocation_list): Psymbol lists now dynamically grown arrays of pointers. (ADD_PSYMBOL_VT_TO_LIST): Initialize new symbol using the psymbol bcache. * symmisc.c (print_partial_symbols): Now takes pointer to pointer to partial symbol. (print_symbol_bcache_statistics): New function to print per objfile bcache statistics. (print_partial_symbol, print_partial_symbols, maintenance_check_symtabs, extend_psymbol_list): Account for change to pointer to pointer to partial symbol. * symtab.c (find_pc_psymbol, lookup_partial_symbol, decode_line_2, make_symbol_completion_list): Account for change to pointer to pointer to partial symbol. * symtab.h (bcache.h): Include. * xcoffread.c (xcoff_start_psymtab): Make global_syms & static_syms type "partial_symbol **".
1996-02-16 22:14:47 +00:00
cd doc; $(MAKE) $(MFLAGS) all-doc
subdir_do: force
@for i in $(DODIRS); do \
if [ -f ./$$i/Makefile ] ; then \
if (cd ./$$i; \
$(MAKE) $(FLAGS_TO_PASS) $(DO)) ; then true ; \
else exit 1 ; fi ; \
else true ; fi ; \
done
Makefile: Makefile.in config.status @frags@
1993-06-23 22:59:35 +00:00
$(SHELL) config.status
config.h: stamp-h ; @true
stamp-h: config.in config.status
CONFIG_HEADERS=config.h:config.in $(SHELL) config.status
config.status: configure
$(SHELL) config.status --recheck
force:
# Documentation!
# GDB QUICK REFERENCE (TeX dvi file, CM fonts)
doc/refcard.dvi:
cd doc; $(MAKE) refcard.dvi $(FLAGS_TO_PASS)
# GDB QUICK REFERENCE (PostScript output, common PS fonts)
doc/refcard.ps:
cd doc; $(MAKE) refcard.ps $(FLAGS_TO_PASS)
# GDB MANUAL: TeX dvi file
doc/gdb.dvi:
cd doc; $(MAKE) gdb.dvi $(FLAGS_TO_PASS)
# GDB MANUAL: info file
doc/gdb.info:
cd doc; $(MAKE) gdb.info $(FLAGS_TO_PASS)
# Make copying.c from COPYING
1993-06-23 22:59:35 +00:00
copying.c: COPYING copying.awk
awk -f $(srcdir)/copying.awk < $(srcdir)/COPYING > copying.c
version.c: Makefile
echo 'char *version = "$(VERSION)";' >version.c
echo 'char *host_name = "$(host_alias)";' >> version.c
echo 'char *target_name = "$(target_alias)";' >> version.c
1993-06-23 22:59:35 +00:00
# c-exp.tab.c is generated in objdir from c-exp.y if it doesn't exist
# in srcdir, then compiled in objdir to c-exp.tab.o.
# If we said c-exp.tab.c rather than ./c-exp.tab.c some makes
# would sometimes re-write it into $(srcdir)/c-exp.tab.c.
# Remove bogus decls for malloc/realloc/free which conflict with everything
# else. Strictly speaking c-exp.tab.c should therefore depend on
# Makefile.in, but that was a pretty big annoyance.
c-exp.tab.o: c-exp.tab.c
c-exp.tab.c: c-exp.y
1993-06-23 22:59:35 +00:00
$(YACC) $(YFLAGS) $(srcdir)/c-exp.y
-sed -e '/extern.*malloc/d' \
-e '/extern.*realloc/d' \
-e '/extern.*free/d' \
* Makefile.in (SFILES_MAINDIR): Add ch-exp.y. * Makefile.in (YYFILES): Add ch-exp.tab.c. * Makefile.in (YYOBJ): Add ch-exp.tab.o. * Makefile.in (saber_gdb): Add unload of ch-exp.y and load of ch-exp.tab.c. * Makefile.in (distclean): Add target ch-exp.tab.c. * Makefile.in (realclean): Add rm of ch-exp.tab.c. * Makefile.in (c-exp.tab.c, m2-exp.tab.c): Add dependency on Makefile since it contains sed patterns used in generation. Add sed pattern to also delete #include of any malloc.h. * Makefile.in (ch-exp.tab.o, ch-exp.tab.c): New targets. * ch-exp.y: New expression parser, for GNU-Chill. * c-exp.y, expr.c, expression.h, language.c, m2-exp.y, parser-defs.h, valarith.c, valops.c, value.h: Remap macros and function names to conform to K&R terminology with respect to logical and bitwise operators: UNOP_ZEROP => UNOP_LOGICAL_NOT UNOP_LOGNOT => UNOP_COMPLEMENT BINOP_LOGAND => BINOP_BITWISE_AND BINOP_LOGXOR => BINOP_BITWISE_XOR BINOP_LOGIOR => BINOP_BITWISE_IOR BINOP_AND => BINOP_LOGICAL_AND BINOP_OR => BINOP_LOGICAL_OR PREC_OR => PREC_LOGICAL_OR PREC_AND => PREC_LOGICAL_AND PREC_LOGIOR => PREC_BITWISE_IOR PREC_LOGXOR => PREC_BITWISE_XOR PREC_LOGAND => PREC_BITWISE_AND value_zerop() => value_logical_not() value_lognot() => value_complement() * c-exp.y (c_op_print_tab): Add explicit empty terminator. * m2-exp.y (m2_op_print_tab): Add explicit empty terminator. * defs.h (enum language): Add language_chill. * dwarfread.c (set_cu_language): Add LANG_CHILL case and make LANG_MODULA2 a recognized language. * eval.c (evaluate_subexp): Add OP_BOOL case. * expprint.c (print_subexp): Add OP_BOOL case. * gdbtypes.h (enum_typecode): Note TYPE_CODE_BOOL used for Chill as well as Modula-2. * gdbtypes.y (builtin_type_chill_bool, builtin_type_chill_long, builtin_type_chill_ulong, builtin_type_chill_real): Add. * i387-tdep.c (sys/dir.h): Remove, appears to be unnecessary and is nonexistant in some SVR4 based systems. * language.c (DEFAULT_ALLOCSIZE): Change from 3 => 4. * language.c (set_language_command): Add chill. * language.c (binop_result_type, integral_type, character_type, boolean_type, structured_type, value_true, binop_type_check): Add language_chill cases. * language.h (_LANG_chill): Define. * m2-exp.y (number_sign, modblock): Make static, #ifdef out unused modblock. * m2-exp.y (ANDAND): Rename to LOGICAL_AND. * source.c (source_info): Fix minor nits, print "1 line" rather than "1 lines", and "language is <lang>". * symfile.c (deduce_language_from_filename): Recognize the filename extensions ".chill", ".c186", and ".c286" for Chill. * valarith.c (value_binop): Handle TYPE_CODE_BOOL as well as TYPE_CODE_INT and TYPE_CODE_FLOAT. * valprint.c (val_print): Print TYPE_CODE_BOOL type values as "TRUE" or "FALSE". * valprint.c (typedef_print): Add case for language_chill. * values.c (value_from_longest): Handle TYPE_CODE_BOOL.
1992-11-15 17:28:02 +00:00
-e '/include.*malloc.h/d' \
-e 's/malloc/xmalloc/g' \
-e 's/realloc/xrealloc/g' \
< y.tab.c > c-exp.new
-rm y.tab.c
mv c-exp.new ./c-exp.tab.c
java-exp.tab.o: java-exp.tab.c
java-exp.tab.c: java-exp.y
$(YACC) $(YFLAGS) $(srcdir)/java-exp.y
-sed -e '/extern.*malloc/d' \
-e '/extern.*realloc/d' \
-e '/extern.*free/d' \
-e '/include.*malloc.h/d' \
-e 's/malloc/xmalloc/g' \
-e 's/realloc/xrealloc/g' \
< y.tab.c > java-exp.new
-rm y.tab.c
mv java-exp.new ./java-exp.tab.c
f-exp.tab.o: f-exp.tab.c
f-exp.tab.c: f-exp.y c-exp.tab.c
$(YACC) $(YFLAGS) $(srcdir)/f-exp.y
-sed -e '/extern.*malloc/d' \
-e '/extern.*realloc/d' \
-e '/extern.*free/d' \
-e '/include.*malloc.h/d' \
-e 's/malloc/xmalloc/g' \
-e 's/realloc/xrealloc/g' \
< y.tab.c > f-exp.new
-rm y.tab.c
mv f-exp.new ./f-exp.tab.c
1993-06-23 22:59:35 +00:00
# m2-exp.tab.c is generated in objdir from m2-exp.y if it doesn't exist
# in srcdir, then compiled in objdir to m2-exp.tab.o.
* Makefile.in (SFILES_MAINDIR): Add ch-exp.y. * Makefile.in (YYFILES): Add ch-exp.tab.c. * Makefile.in (YYOBJ): Add ch-exp.tab.o. * Makefile.in (saber_gdb): Add unload of ch-exp.y and load of ch-exp.tab.c. * Makefile.in (distclean): Add target ch-exp.tab.c. * Makefile.in (realclean): Add rm of ch-exp.tab.c. * Makefile.in (c-exp.tab.c, m2-exp.tab.c): Add dependency on Makefile since it contains sed patterns used in generation. Add sed pattern to also delete #include of any malloc.h. * Makefile.in (ch-exp.tab.o, ch-exp.tab.c): New targets. * ch-exp.y: New expression parser, for GNU-Chill. * c-exp.y, expr.c, expression.h, language.c, m2-exp.y, parser-defs.h, valarith.c, valops.c, value.h: Remap macros and function names to conform to K&R terminology with respect to logical and bitwise operators: UNOP_ZEROP => UNOP_LOGICAL_NOT UNOP_LOGNOT => UNOP_COMPLEMENT BINOP_LOGAND => BINOP_BITWISE_AND BINOP_LOGXOR => BINOP_BITWISE_XOR BINOP_LOGIOR => BINOP_BITWISE_IOR BINOP_AND => BINOP_LOGICAL_AND BINOP_OR => BINOP_LOGICAL_OR PREC_OR => PREC_LOGICAL_OR PREC_AND => PREC_LOGICAL_AND PREC_LOGIOR => PREC_BITWISE_IOR PREC_LOGXOR => PREC_BITWISE_XOR PREC_LOGAND => PREC_BITWISE_AND value_zerop() => value_logical_not() value_lognot() => value_complement() * c-exp.y (c_op_print_tab): Add explicit empty terminator. * m2-exp.y (m2_op_print_tab): Add explicit empty terminator. * defs.h (enum language): Add language_chill. * dwarfread.c (set_cu_language): Add LANG_CHILL case and make LANG_MODULA2 a recognized language. * eval.c (evaluate_subexp): Add OP_BOOL case. * expprint.c (print_subexp): Add OP_BOOL case. * gdbtypes.h (enum_typecode): Note TYPE_CODE_BOOL used for Chill as well as Modula-2. * gdbtypes.y (builtin_type_chill_bool, builtin_type_chill_long, builtin_type_chill_ulong, builtin_type_chill_real): Add. * i387-tdep.c (sys/dir.h): Remove, appears to be unnecessary and is nonexistant in some SVR4 based systems. * language.c (DEFAULT_ALLOCSIZE): Change from 3 => 4. * language.c (set_language_command): Add chill. * language.c (binop_result_type, integral_type, character_type, boolean_type, structured_type, value_true, binop_type_check): Add language_chill cases. * language.h (_LANG_chill): Define. * m2-exp.y (number_sign, modblock): Make static, #ifdef out unused modblock. * m2-exp.y (ANDAND): Rename to LOGICAL_AND. * source.c (source_info): Fix minor nits, print "1 line" rather than "1 lines", and "language is <lang>". * symfile.c (deduce_language_from_filename): Recognize the filename extensions ".chill", ".c186", and ".c286" for Chill. * valarith.c (value_binop): Handle TYPE_CODE_BOOL as well as TYPE_CODE_INT and TYPE_CODE_FLOAT. * valprint.c (val_print): Print TYPE_CODE_BOOL type values as "TRUE" or "FALSE". * valprint.c (typedef_print): Add case for language_chill. * values.c (value_from_longest): Handle TYPE_CODE_BOOL.
1992-11-15 17:28:02 +00:00
# Remove bogus decls for malloc/realloc/free which conflict with everything
# else.
m2-exp.tab.o: m2-exp.tab.c
m2-exp.tab.c: m2-exp.y
1993-06-23 22:59:35 +00:00
$(YACC) $(YFLAGS) $(srcdir)/m2-exp.y
-sed -e '/extern.*malloc/d' \
-e '/extern.*realloc/d' \
-e '/extern.*free/d' \
* Makefile.in (SFILES_MAINDIR): Add ch-exp.y. * Makefile.in (YYFILES): Add ch-exp.tab.c. * Makefile.in (YYOBJ): Add ch-exp.tab.o. * Makefile.in (saber_gdb): Add unload of ch-exp.y and load of ch-exp.tab.c. * Makefile.in (distclean): Add target ch-exp.tab.c. * Makefile.in (realclean): Add rm of ch-exp.tab.c. * Makefile.in (c-exp.tab.c, m2-exp.tab.c): Add dependency on Makefile since it contains sed patterns used in generation. Add sed pattern to also delete #include of any malloc.h. * Makefile.in (ch-exp.tab.o, ch-exp.tab.c): New targets. * ch-exp.y: New expression parser, for GNU-Chill. * c-exp.y, expr.c, expression.h, language.c, m2-exp.y, parser-defs.h, valarith.c, valops.c, value.h: Remap macros and function names to conform to K&R terminology with respect to logical and bitwise operators: UNOP_ZEROP => UNOP_LOGICAL_NOT UNOP_LOGNOT => UNOP_COMPLEMENT BINOP_LOGAND => BINOP_BITWISE_AND BINOP_LOGXOR => BINOP_BITWISE_XOR BINOP_LOGIOR => BINOP_BITWISE_IOR BINOP_AND => BINOP_LOGICAL_AND BINOP_OR => BINOP_LOGICAL_OR PREC_OR => PREC_LOGICAL_OR PREC_AND => PREC_LOGICAL_AND PREC_LOGIOR => PREC_BITWISE_IOR PREC_LOGXOR => PREC_BITWISE_XOR PREC_LOGAND => PREC_BITWISE_AND value_zerop() => value_logical_not() value_lognot() => value_complement() * c-exp.y (c_op_print_tab): Add explicit empty terminator. * m2-exp.y (m2_op_print_tab): Add explicit empty terminator. * defs.h (enum language): Add language_chill. * dwarfread.c (set_cu_language): Add LANG_CHILL case and make LANG_MODULA2 a recognized language. * eval.c (evaluate_subexp): Add OP_BOOL case. * expprint.c (print_subexp): Add OP_BOOL case. * gdbtypes.h (enum_typecode): Note TYPE_CODE_BOOL used for Chill as well as Modula-2. * gdbtypes.y (builtin_type_chill_bool, builtin_type_chill_long, builtin_type_chill_ulong, builtin_type_chill_real): Add. * i387-tdep.c (sys/dir.h): Remove, appears to be unnecessary and is nonexistant in some SVR4 based systems. * language.c (DEFAULT_ALLOCSIZE): Change from 3 => 4. * language.c (set_language_command): Add chill. * language.c (binop_result_type, integral_type, character_type, boolean_type, structured_type, value_true, binop_type_check): Add language_chill cases. * language.h (_LANG_chill): Define. * m2-exp.y (number_sign, modblock): Make static, #ifdef out unused modblock. * m2-exp.y (ANDAND): Rename to LOGICAL_AND. * source.c (source_info): Fix minor nits, print "1 line" rather than "1 lines", and "language is <lang>". * symfile.c (deduce_language_from_filename): Recognize the filename extensions ".chill", ".c186", and ".c286" for Chill. * valarith.c (value_binop): Handle TYPE_CODE_BOOL as well as TYPE_CODE_INT and TYPE_CODE_FLOAT. * valprint.c (val_print): Print TYPE_CODE_BOOL type values as "TRUE" or "FALSE". * valprint.c (typedef_print): Add case for language_chill. * values.c (value_from_longest): Handle TYPE_CODE_BOOL.
1992-11-15 17:28:02 +00:00
-e '/include.*malloc.h/d' \
-e 's/malloc/xmalloc/g' \
-e 's/realloc/xrealloc/g' \
< y.tab.c > m2-exp.new
-rm y.tab.c
mv m2-exp.new ./m2-exp.tab.c
# These files are updated atomically, so make never has to remove them
.PRECIOUS: m2-exp.tab.c java-exp.tab.c f-exp.tab.c c-exp.tab.c
lint: $(LINTFILES)
$(LINT) $(INCLUDE_CFLAGS) $(LINTFLAGS) $(LINTFILES) \
`echo $(DEPFILES) | sed 's/\.o /\.c /g'`
gdb.cxref: $(SFILES)
cxref -I. $(SFILES) >gdb.cxref
force_update:
# GNU Make has an annoying habit of putting *all* the Makefile variables
# into the environment, unless you include this target as a circumvention.
# Rumor is that this will be fixed (and this target can be removed)
# in GNU Make 4.0.
.NOEXPORT:
# GNU Make 3.63 has a different problem: it keeps tacking command line
# overrides onto the definition of $(MAKE). This variable setting
# will remove them.
MAKEOVERRIDES=
## This is ugly, but I don't want GNU make to put these variables in
## the environment. Older makes will see this as a set of targets
## with no dependencies and no actions.
unexport CHILLFLAGS CHILL_LIB CHILL_FOR_TARGET :
ALLDEPFILES = 29k-share/udi/udip2soc.c 29k-share/udi/udr.c \
29k-share/udi/udi2go32.c \
a29k-tdep.c a68v-nat.c alpha-nat.c alpha-tdep.c \
Changes to support alpha OSF/1 in native mode. * alpha-nat.c, alpha-tdep.c, config/alpha/alpha-osf1.mt, config/alpha/nm-alpha.h, config/alpha/tm-alpha.h, osfsolib.c: New files. * Makefile.in: Add new files and dependencies. * configure.in: Add alpha target. * config/alpha/alpha-osf1.mh (NATDEPFILES): Add osfsolib.o * config/alpha/alpha-osf1.mh (MH_CFLAGS): Remove, we can handle shared libraries now. * config/alpha/xm-alpha.h: Cleanup, get MAKEVA_* defines right. * defs.h (CORE_ADDR): Make its type overridable via CORE_ADDR_TYPE, provide `unsigned int' default. * breakpoint.c (breakpoint_auto_delete): Delete only if we really stopped for the breakpoint. * stabsread.c, stabsread.h (define_symbol): Change valu parameter to a CORE_ADDR. * stabsread.c (read_range_type): Handle the case where the lower bound overflows and the upper doesn't and the range is legal. * infrun.c (resume): Do not step a breakpoint instruction if CANNOT_STEP_BREAKPOINT is defined. * inferior.h (CALL_DUMMY_LOCATION): New variant AT_ENTRY_POINT. Now that we have the bp_call_dummy breakpoint the call dummy code is no longer needed. PUSH_DUMMY_FRAME, PUSH_ARGUMENTS and FIX_CALL_DUMMY can be used to set up everything for the dummy. The breakpoint for the dummy is set at the entry point and thats it. * blockframe.c (inside_entry_file, inside_entry_func): Do not stop backtraces if pc is in the call dummy at the entry point. * infcmd.c (run_stack_dummy): Handle AT_ENTRY_POINT case. Use the expected breakpoint pc when setting up the frame for set_momentary_breakpoint. * symfile.c (entry_point_address): New function for AT_ENTRY_POINT support. * valops.c (call_function_by_hand): Handle AT_ENTRY_POINT case.
1993-10-05 19:44:57 +00:00
altos-xdep.c arm-convert.s \
arm-tdep.c arm-xdep.c coff-solib.c \
* coredep.c: Renamed to core-aout.c * core-svr4.c: Renamed to core-regset.c * Makefile.in (ALLDEPFILES): Account for renamings. * corelow.c (core_file_fns): Add, points to chain of structs. (add_core_fns): New function to build chain of structs. (get_core_registers): Modify to search core functions chain and call appropriate fetch_core_registers function based on core file flavour. * gdbcore.h (fetch_core_registers): Remove declaration. (struct core_fns): Define struct for core function info. * i386m3-nat.c: Update comment for filename change (coredep->core-aout) * a68v-nat.c (fetch_core_registers): Remove stub, not needed now. * alpha-nat.c (fetch_core_registers): Make static. (alpha_core_fns, _initialize_core_alpha): New struct and func. * core-aout.c (fetch_core_registers): Make static (aout_core_fns, _initialize_core_aout): New struct and func. * core-regset.c (fetch_core_registers): Make static. (regset_core_fns, _initialize_core_regset): New struct and func. * core-sol2.c (fetch_core_registers): Make static. (solaris_core_fns, _initialize_core_solaris): New struct and func. * hp300ux-nat.c (fetch_core_registers): Make static. (hp300ux_core_fns, _initialize_core_hp300ux): New struct and func. * i386aix-nat.c (fetch_core_registers): Make static. (i386aix_core_fns, _initialize_core_i386aix): New struct and func. * i386mach-nat.c (fetch_core_registers: Make static. (i386mach_core_fns, _initialize_core_i386mach): New struct and func. * irix4-nat.c (fetch_core_registers): Make static. (irix4_core_fns, _initialize_core_irix4): New struct and func. * irix5-nat.c (fetch_core_registers): (irix5_core_fns, _initialize_core_irix5): New struct and func. * lynx-nat.c (fetch_core_registers): Make static. (lynx_core_fns, _initialize_core_lynx): New struct and func. * mips-nat.c (fetch_core_registers): Make static. (mips_core_fns, _initialize_core_mips): New struct and func. * ns32km3-nat.c (fetch_core_registers): Remove stub. * rs6000-nat.c (fetch_core_registers): Make static. (rs6000_core_fns, _initialize_core_rs6000): New struct and func. * sparc-nat.c (fetch_core_registers): Make static. (sparc_core_fns, _initialize_core_sparc): New struct and func. * sun3-nat.c (fetch_core_registers): (sun3_core_fns, _initialize_core_sun3): New struct and func. * sun386-nat.c (fetch_core_registers): Remove stub. * ultra3-nat.c (fetch_core_registers): Make static. (ultra3_core_fns, _initialize_core_ultra3): New struct and func. * config/gould/pn.mh (XDEPFILES), config/i386/fbsd.mh (NATDEPFILES), config/i386/i386bsd.mh (NATDEPFILES), config/i386/i386m3.mh (XDEPFILES), config/i386/i386sco.mh (NATDEPFILES), config/i386/i386sco4.mh (NATDEPFILES), config/i386/i386v.mh (NATDEPFILES), config/i386/i386v32.mh (NATDEPFILES), config/i386/nbsd.mh (NATDEPFILES), config/i386/ptx.mh (XDEPFILES), config/i386/ptx4.mh (XDEPFILES), config/i386/symmetry.mh (NATDEPFILES), config/m68k/3b1.mh (XDEPFILES), config/m68k/cisco.mt (TDEPFILES), config/m68k/delta68.mh (NATDEPFILES), config/m68k/dpx2.mh (NATDEPFILES), config/m68k/hp300bsd.mh (NATDEPFILES), config/m68k/hp300hpux.mh (NATDEPFILES), config/m68k/isi.mh (XDEPFILES), config/m68k/news.mh (NATDEPFILES), config/m68k/news1000.mh (XDEPFILES), config/m88k/cxux.mh (NATDEPFILES), config/m88k/delta88.mh (NATDEPFILES), config/mips/littlemips.mh (XDEPFILES), config/mips/mipsm3.mh (XDEPFILES), config/ns32k/merlin.mh (XDEPFILES), config/ns32k/nbsd.mh (NATDEPFILES), config/ns32k/ns32km3.mh (NATDEPFILES), config/pa/hppabsd.mh (NATDEPFILES), config/pa/hppahpux.mh (NATDEPFILES), config/romp/rtbsd.mh (XDEPFILES), config/tahoe/tahoe.mh (XDEPFILES), config/vax/vaxbsd.mh (XDEPFILES), config/vax/vaxult.mh (NATDEPFILES), config/vax/vaxult2.mh (NATDEPFILES), Account for coredep.o to core-aout.o name change. * config/i386/i386dgux (NATDEPFILES), config/i386/i386sol2.mh (NATDEPFILES), config/i386/i386v4.mh (NATDEPFILES), config/i386/linux.mh (NATDEPFILES), config/i386/ncr3000.mh (NATDEPFILES), config/m68k/m68kv4.mh (NATDEPFILES), config/m88k/delta88v4.mh (NATDEPFILES), config/mips/mipsv4.mh (NATDEPFILES), Account for core-svr4.o to core-regset.o name change.
1996-01-11 20:08:15 +00:00
convex-tdep.c convex-xdep.c \
core-sol2.c core-regset.c core-aout.c corelow.c \
dcache.c delta68-nat.c dpx2-nat.c dstread.c exec.c fork-child.c \
go32-xdep.c gould-tdep.c gould-xdep.c h8300-tdep.c h8500-tdep.c \
hp300ux-nat.c hppa-tdep.c hppab-nat.c hppah-nat.c \
hpread.c \
i386-tdep.c i386b-nat.c i386mach-nat.c i386v-nat.c \
i386aix-nat.c i386m3-nat.c i386v4-nat.c i386ly-tdep.c \
i387-tdep.c \
i960-tdep.c \
infptrace.c inftarg.c irix4-nat.c irix5-nat.c isi-xdep.c \
lynx-nat.c m3-nat.c \
m68k-tdep.c \
m88k-nat.c m88k-tdep.c mac-nat.c mips-nat.c \
gcc -Wall lint: * breakpoint.c (watchpoint_check): Remove unused variable b. * stack.c (print_frame_info): Move sp and buf inside #if. * eval.c (evaluate_subexp): Remove unused variables pp, mangle_ptr, ptr, and mangle_tstr. * valarith.c (value_x_binop): Remove unused variables mangle_tstr and mangle_ptr. * symtab.c (lookup_symtab): Put variable copy inside #if. (decode_line_1): Put variable q1 inside #if 0. * target.h: Declare target_link. * infrun.c (wait_for_inferior): Remove unused variables signame. * remote.c (remote_resume): Remove unused variable name. * c-exp.y (parse_number): Parenthesize operand of shift. * dbxread.c (record_minimal_symbol): Parenthesize operand of && (this is a semantic change, the warning seems to have detected a bug). * dbxread.c (end_psymtab): Move variable p1 inside #if. * coffread.c: Move variable temptype inside #if. * ch-typeprint.c (chill_type_print_base): Remove unused variable name. * ch-valprint.c: #include typeprint.h and ch-lang.h. (chill_val_print): Remove unused variable in_range. (chill_val_print): Remove statement "length > TYPE_LENGTH (type);". (chill_val_print): Add default case for switch. * stabsread.h: Declare stabsect_build_psymtabs. * os9kread.c (read_minimal_symbols): Make this return void. (os9k_symfile_read): Remove unused variables stb_exist and val. (os9k_symfile_init): Remove unused variable val. (fill_sym): Remove unused variable id. (read_os9k_psymtab): Put variable back_to inside #if 0. Remove unused variable nsl. Remove unused variable symfile_bfd. #if 0 unused variables lbrac_unmatched_complaint and lbrac_mismatch_complaint. Remove declaration for non-existent function os9k_next_symbol_text. * annotate.c, annotate.h: New files, containing a function for each annotation which outputs it. * Move breakpoints_changed from breakpoint.c to annotate.c. * breakpoint.c, blockframe.c, infrun.c, cp-valprint.c, main.c, printcmd.c, source.c, stack.c, utils.c, valprint.c: Use annotate.c functions to output annotations. * Makefile.in (OBS): Add annotate.o.
1994-05-13 18:18:57 +00:00
mips-tdep.c mipsm3-nat.c mipsv4-nat.c news-xdep.c \
nindy-share/Onindy.c nindy-share/nindy.c \
nindy-share/ttyflush.c nindy-tdep.c \
ns32k-tdep.c ns32km3-nat.c osfsolib.c \
somread.c somsolib.c $(HPREAD_SOURCE) \
procfs.c pyr-tdep.c pyr-xdep.c \
remote-adapt.c remote-array.c remote-bug.c remote-e7000.c remote-eb.c \
remote-es.c remote-hms.c remote-mips.c \
Thu Sep 28 14:32:11 1995 steve chamberlain <sac@slash.cygnus.com> * callback.[ch]: New files. * remote-rdp.c: Support for the ARM RDP monitor. * Makefile: Update. * arm-tdep.c (arm_othernames): New. (_initialize_arm_tdep): install 'othernames' command. (arm_nullified_insn, shifted_reg_val, arm_get_next_pc): New. * configure.in: Check for termios.h, termio.h and sgtty.h. (i[345]86-*-win32*): New host. * configure: Regenerated. * inflow.c: Clean up inclusions. * main.c (main): Check for WINGDB, not WIN32. * printcmd.c (do_examine): Put QUIT test in loop. * remote-hms.c (e7000_load): Delete. (hms_ops): Point to generic_load instead. * remote-hms.c (hms_ops): Point to generic_load. * remote-sim.c (sim_callback_write_stdout): Becomes gdbsim_write_stdout. (gdbsim_load): Call generic_load. * remote-utils.c (gr_load_image): Delete. * ser-unix.c (terminal.h): Include instead of havig own #if tree. (hardwire_flush_input): Reset input buffer too. * source.c (openp): If WIN32 then open file in binary mode. * terminal.h: Configure IO mechanism using autoconf defines if available and not overriden. * utils.c (quit, pollquit, notice_quit): WIN32 check becomes WINGDB check. * config/arm/arm.mt (TDEPFILES): Add remote-rdp.o * config/arm/tm-arm.h (TARGET_BYTE_ORDER): becomes TARGET_BYTE_ORDER_SELECTABLE. (ADDR_BITS_REMOVE): New. (ORIGINAL_REGISTER_NAMES, ADDITIONAL_REGISTER_NAMES): New. (INST_xx): New (FRAME_FIND_SAVED_REGS): Pass the right argument. (arm_get_next_pc): Declare. * mswin/prebuilt/*/bfdtarget.h (SELECT_ARCHITECTURES): Need leading &.
1995-09-29 00:14:01 +00:00
remote-mm.c remote-nindy.c remote-os9k.c remote-rdp.c remote-sim.c \
remote-st.c remote-utils.c dcache.c \
remote-udi.c remote-vx.c remote-vx29k.c \
rs6000-nat.c rs6000-tdep.c \
ser-go32.c ser-tcp.c sh-tdep.c solib.c sparc-nat.c \
sparc-tdep.c sparcl-tdep.c sun3-nat.c sun386-nat.c \
symm-tdep.c symm-nat.c \
tahoe-tdep.c ultra3-nat.c ultra3-xdep.c umax-xdep.c \
vax-tdep.c \
vx-share/xdr_ld.c vx-share/xdr_ptrace.c vx-share/xdr_rdb.c \
win32-nat.c \
xcoffread.c xcoffsolib.c z8k-tdep.c
1993-06-23 22:59:35 +00:00
ALLCONFIG = config/a29k/a29k-kern.mt config/a29k/a29k-udi.mt config/a29k/vx29k.mt\
1993-06-23 22:59:35 +00:00
config/a29k/a29k.mt config/a29k/ultra3.mh config/a29k/ultra3.mt \
* README: Add note about SPARCworks cc release 3.0 and higher. Add procfs support for Alpha OSF/1-2.x. * config/alpha/nm-osf.h: Renamed from nm-alpha.h, generic OSF/1 native support. * config/alpha/alpha-osf1.mh (NAT_FILE): Changed accordingly. (MUNCH_DEFINE): Removed. * config/alpha/alpha-osf2.mh, config/alpha/nm-osf2.h: New files for procfs support. * configure.in (alpha-dec-osf*): Use alpha-osf2.mh for OSF/1 release 2.x and higher, else alpha-osf1.mh, as the procfs support in release 1.x is incomplete. * Makefile.in (ALLCONFIG): Add config/alpha/alpha-osf2.mh. * alpha-nat.c (supply_gregset, fill_gregset, supply_fpgregset, fill_fpgregset): New routines for procfs support. * inftarg.c (_initialize_inftarg): Don't add ptrace support if we have an optional procfs and /proc is accessible. * procfs.c: Include sys/fault.h and sys/syscall.h before including sys/procfs.h. (unconditionally_kill_inferior): If PROCFS_NEED_PIOCSSIG_FOR_KILL is defined, additionally perform a PIOCSSIG to really terminate the inferior. (create_procinfo): Always return a result. (create_procinfo, do_attach): Don't trace T_IFAULT faults if PROCFS_DONT_TRACE_IFAULT is defined. (procfs_init_inferior): Use START_INFERIOR_TRAPS_EXPECTED as argument to startup_inferior if it is defined. (proc_set_exec_trap): If PIOCSSPCACT is defined, use it instead of tracing exits from exec system calls. Needed for the user level loader under Alpha OSF/1. (do_detach): Clear any pending signal if we want to detach from a process without a signal. (set_proc_siginfo): If PROCFS_DONT_PIOCSSIG_CURSIG is defined, don't issue a PIOCSSIG if pr_cursig already contains the signal we intend to set. (info_proc_signals): If PROCFS_SIGPEND_OFFSET is defined, the pending signals are numbered from 1 instead of 0. (info_proc_mappings): Increase size of output format for addresses if BFD_HOST_64_BIT is defined. (procfs_stop): Renamed from child_stop. (_initialize_procfs): Don't add procfs support if we have an optional procfs and /proc is not accessible.
1995-01-12 18:12:04 +00:00
config/alpha/alpha-osf1.mh config/alpha/alpha-osf2.mh \
config/alpha/alpha-osf1.mt config/alpha/alpha-nw.mt \
1993-06-23 22:59:35 +00:00
config/arm/arm.mh config/arm/arm.mt config/convex/convex.mh \
config/convex/convex.mt config/gould/np1.mh config/gould/np1.mt \
config/gould/pn.mh config/gould/pn.mt config/h8300/h8300hms.mt \
config/h8500/h8500hms.mt config/i386/go32.mh config/i386/i386aix.mh \
config/i386/i386aix.mt config/i386/i386aout.mt config/i386/i386bsd.mh \
config/i386/i386bsd.mt config/i386/i386lynx.mh \
config/i386/i386lynx.mt config/i386/i386m3.mh config/i386/i386m3.mt \
config/i386/i386mach.mh config/i386/i386mk.mh config/i386/i386mk.mt \
config/i386/i386nw.mt config/i386/i386sco.mh \
config/i386/i386sco4.mh \
1993-06-23 22:59:35 +00:00
config/i386/i386sol2.mh config/i386/i386sol2.mt config/i386/i386v.mh \
config/i386/i386v.mt config/i386/i386v32.mh config/i386/i386v4.mh \
config/i386/i386v4.mt config/i386/linux.mh config/i386/linux.mt \
config/i386/ncr3000.mh config/i386/ncr3000.mt config/i386/ptx.mh \
config/i386/sun386.mh \
1993-06-23 22:59:35 +00:00
config/i386/sun386.mt config/i386/symmetry.mh config/i386/symmetry.mt \
config/i386/win32.mh config/i386/win32.mt \
config/i960/mon960.mt \
1993-06-23 22:59:35 +00:00
config/i960/nindy960.mt config/i960/vxworks960.mt config/m68k/3b1.mh \
config/m68k/3b1.mt config/m68k/altos.mh config/m68k/altos.mt \
config/m68k/amix.mh config/m68k/amix.mt config/m68k/apollo68b.mh \
config/m68k/apollo68b.mt \
gcc -Wall lint: * breakpoint.c (watchpoint_check): Remove unused variable b. * stack.c (print_frame_info): Move sp and buf inside #if. * eval.c (evaluate_subexp): Remove unused variables pp, mangle_ptr, ptr, and mangle_tstr. * valarith.c (value_x_binop): Remove unused variables mangle_tstr and mangle_ptr. * symtab.c (lookup_symtab): Put variable copy inside #if. (decode_line_1): Put variable q1 inside #if 0. * target.h: Declare target_link. * infrun.c (wait_for_inferior): Remove unused variables signame. * remote.c (remote_resume): Remove unused variable name. * c-exp.y (parse_number): Parenthesize operand of shift. * dbxread.c (record_minimal_symbol): Parenthesize operand of && (this is a semantic change, the warning seems to have detected a bug). * dbxread.c (end_psymtab): Move variable p1 inside #if. * coffread.c: Move variable temptype inside #if. * ch-typeprint.c (chill_type_print_base): Remove unused variable name. * ch-valprint.c: #include typeprint.h and ch-lang.h. (chill_val_print): Remove unused variable in_range. (chill_val_print): Remove statement "length > TYPE_LENGTH (type);". (chill_val_print): Add default case for switch. * stabsread.h: Declare stabsect_build_psymtabs. * os9kread.c (read_minimal_symbols): Make this return void. (os9k_symfile_read): Remove unused variables stb_exist and val. (os9k_symfile_init): Remove unused variable val. (fill_sym): Remove unused variable id. (read_os9k_psymtab): Put variable back_to inside #if 0. Remove unused variable nsl. Remove unused variable symfile_bfd. #if 0 unused variables lbrac_unmatched_complaint and lbrac_mismatch_complaint. Remove declaration for non-existent function os9k_next_symbol_text. * annotate.c, annotate.h: New files, containing a function for each annotation which outputs it. * Move breakpoints_changed from breakpoint.c to annotate.c. * breakpoint.c, blockframe.c, infrun.c, cp-valprint.c, main.c, printcmd.c, source.c, stack.c, utils.c, valprint.c: Use annotate.c functions to output annotations. * Makefile.in (OBS): Add annotate.o.
1994-05-13 18:18:57 +00:00
config/m68k/apollo68v.mh \
config/m68k/cisco.mt config/m68k/delta68.mh \
config/m68k/delta68.mt config/m68k/dpx2.mh config/m68k/dpx2.mt \
config/m68k/es1800.mt config/m68k/hp300bsd.mh \
1993-06-23 22:59:35 +00:00
config/m68k/hp300bsd.mt config/m68k/hp300hpux.mh \
config/m68k/hp300hpux.mt config/m68k/isi.mh config/m68k/isi.mt \
config/m68k/m68klynx.mh config/m68k/m68klynx.mt \
config/m68k/monitor.mt \
1993-06-23 22:59:35 +00:00
config/m68k/news.mh config/m68k/news.mt config/m68k/news1000.mh \
config/m68k/os68k.mt config/m68k/st2000.mt config/m68k/sun2os3.mh \
config/m68k/sun2os3.mt config/m68k/sun2os4.mh config/m68k/sun2os4.mt \
config/m68k/sun3os3.mh config/m68k/sun3os3.mt config/m68k/sun3os4.mh \
config/m68k/sun3os4.mt config/m68k/vxworks68.mt config/m88k/delta88.mh \
config/m88k/delta88.mt config/m88k/delta88v4.mh \
config/m88k/delta88v4.mt config/m88k/m88k.mh config/m88k/m88k.mt \
config/mips/bigmips.mt config/mips/bigmips64.mt \
config/mips/decstation.mh \
1993-06-23 22:59:35 +00:00
config/mips/decstation.mt config/mips/idt.mt config/mips/idtl.mt \
config/mips/idt64.mt config/mips/idtl64.mt \
1993-06-23 22:59:35 +00:00
config/mips/irix3.mh config/mips/irix3.mt config/mips/irix4.mh \
config/mips/irix5.mh config/mips/irix5.mt \
1993-06-23 22:59:35 +00:00
config/mips/littlemips.mh config/mips/littlemips.mt \
config/mips/mipsel64.mt \
config/mips/mipsm3.mh config/mips/mipsm3.mt \
gcc -Wall lint: * breakpoint.c (watchpoint_check): Remove unused variable b. * stack.c (print_frame_info): Move sp and buf inside #if. * eval.c (evaluate_subexp): Remove unused variables pp, mangle_ptr, ptr, and mangle_tstr. * valarith.c (value_x_binop): Remove unused variables mangle_tstr and mangle_ptr. * symtab.c (lookup_symtab): Put variable copy inside #if. (decode_line_1): Put variable q1 inside #if 0. * target.h: Declare target_link. * infrun.c (wait_for_inferior): Remove unused variables signame. * remote.c (remote_resume): Remove unused variable name. * c-exp.y (parse_number): Parenthesize operand of shift. * dbxread.c (record_minimal_symbol): Parenthesize operand of && (this is a semantic change, the warning seems to have detected a bug). * dbxread.c (end_psymtab): Move variable p1 inside #if. * coffread.c: Move variable temptype inside #if. * ch-typeprint.c (chill_type_print_base): Remove unused variable name. * ch-valprint.c: #include typeprint.h and ch-lang.h. (chill_val_print): Remove unused variable in_range. (chill_val_print): Remove statement "length > TYPE_LENGTH (type);". (chill_val_print): Add default case for switch. * stabsread.h: Declare stabsect_build_psymtabs. * os9kread.c (read_minimal_symbols): Make this return void. (os9k_symfile_read): Remove unused variables stb_exist and val. (os9k_symfile_init): Remove unused variable val. (fill_sym): Remove unused variable id. (read_os9k_psymtab): Put variable back_to inside #if 0. Remove unused variable nsl. Remove unused variable symfile_bfd. #if 0 unused variables lbrac_unmatched_complaint and lbrac_mismatch_complaint. Remove declaration for non-existent function os9k_next_symbol_text. * annotate.c, annotate.h: New files, containing a function for each annotation which outputs it. * Move breakpoints_changed from breakpoint.c to annotate.c. * breakpoint.c, blockframe.c, infrun.c, cp-valprint.c, main.c, printcmd.c, source.c, stack.c, utils.c, valprint.c: Use annotate.c functions to output annotations. * Makefile.in (OBS): Add annotate.o.
1994-05-13 18:18:57 +00:00
config/mips/mipsv4.mh config/mips/mipsv4.mt \
config/mips/news-mips.mh config/mips/riscos.mh \
1993-06-23 22:59:35 +00:00
config/none/none.mh config/none/none.mt config/ns32k/merlin.mh \
config/ns32k/merlin.mt config/ns32k/ns32km3.mh config/ns32k/ns32km3.mt \
config/ns32k/umax.mh config/ns32k/umax.mt \
1993-06-23 22:59:35 +00:00
config/pa/hppabsd.mh config/pa/hppabsd.mt config/pa/hppahpux.mh \
config/pa/hppahpux.mt config/pyr/pyramid.mh config/pyr/pyramid.mt \
config/romp/rtbsd.mh config/rs6000/rs6000.mh config/rs6000/rs6000.mt \
config/sh/sh.mt config/sparc/sparc-em.mt config/sparc/sparclite.mt \
config/sparc/sparclynx.mh config/sparc/sparclynx.mt \
1993-06-23 22:59:35 +00:00
config/sparc/sun4os4.mh config/sparc/sun4os4.mt \
config/sparc/sun4sol2.mh config/sparc/sun4sol2.mt \
config/sparc/vxsparc.mt config/tahoe/tahoe.mh config/tahoe/tahoe.mt \
config/vax/vax.mt config/vax/vaxbsd.mh config/vax/vaxult.mh \
config/vax/vaxult2.mh config/z8k/z8ksim.mt
udip2soc.o: $(srcdir)/29k-share/udi/udip2soc.c $(udiheaders)
1993-06-23 22:59:35 +00:00
$(CC) -c $(INTERNAL_CFLAGS) $(srcdir)/29k-share/udi/udip2soc.c
udi2go32.o: $(srcdir)/29k-share/udi/udi2go32.c $(udiheaders)
$(CC) -c $(INTERNAL_CFLAGS) $(srcdir)/29k-share/udi/udi2go32.c
udr.o: $(srcdir)/29k-share/udi/udr.c $(udiheaders)
1993-06-23 22:59:35 +00:00
$(CC) -c $(INTERNAL_CFLAGS) $(srcdir)/29k-share/udi/udr.c
a29k-tdep.o: a29k-tdep.c $(gdbcmd_h) $(gdbcore_h) $(inferior_h) $(defs_h)
1993-06-23 22:59:35 +00:00
a68v-nat.o: a68v-nat.c $(defs_h) $(gdbcore_h) $(inferior_h)
Changes to support alpha OSF/1 in native mode. * alpha-nat.c, alpha-tdep.c, config/alpha/alpha-osf1.mt, config/alpha/nm-alpha.h, config/alpha/tm-alpha.h, osfsolib.c: New files. * Makefile.in: Add new files and dependencies. * configure.in: Add alpha target. * config/alpha/alpha-osf1.mh (NATDEPFILES): Add osfsolib.o * config/alpha/alpha-osf1.mh (MH_CFLAGS): Remove, we can handle shared libraries now. * config/alpha/xm-alpha.h: Cleanup, get MAKEVA_* defines right. * defs.h (CORE_ADDR): Make its type overridable via CORE_ADDR_TYPE, provide `unsigned int' default. * breakpoint.c (breakpoint_auto_delete): Delete only if we really stopped for the breakpoint. * stabsread.c, stabsread.h (define_symbol): Change valu parameter to a CORE_ADDR. * stabsread.c (read_range_type): Handle the case where the lower bound overflows and the upper doesn't and the range is legal. * infrun.c (resume): Do not step a breakpoint instruction if CANNOT_STEP_BREAKPOINT is defined. * inferior.h (CALL_DUMMY_LOCATION): New variant AT_ENTRY_POINT. Now that we have the bp_call_dummy breakpoint the call dummy code is no longer needed. PUSH_DUMMY_FRAME, PUSH_ARGUMENTS and FIX_CALL_DUMMY can be used to set up everything for the dummy. The breakpoint for the dummy is set at the entry point and thats it. * blockframe.c (inside_entry_file, inside_entry_func): Do not stop backtraces if pc is in the call dummy at the entry point. * infcmd.c (run_stack_dummy): Handle AT_ENTRY_POINT case. Use the expected breakpoint pc when setting up the frame for set_momentary_breakpoint. * symfile.c (entry_point_address): New function for AT_ENTRY_POINT support. * valops.c (call_function_by_hand): Handle AT_ENTRY_POINT case.
1993-10-05 19:44:57 +00:00
alpha-nat.o: alpha-nat.c $(defs_h) $(gdbcore_h) $(inferior_h) target.h
alpha-tdep.o: alpha-tdep.c $(defs_h) $(gdbcmd_h) $(gdbcore_h) \
$(inferior_h) $(symtab_h) $(dis-asm.h) gdb_string.h
Changes to support alpha OSF/1 in native mode. * alpha-nat.c, alpha-tdep.c, config/alpha/alpha-osf1.mt, config/alpha/nm-alpha.h, config/alpha/tm-alpha.h, osfsolib.c: New files. * Makefile.in: Add new files and dependencies. * configure.in: Add alpha target. * config/alpha/alpha-osf1.mh (NATDEPFILES): Add osfsolib.o * config/alpha/alpha-osf1.mh (MH_CFLAGS): Remove, we can handle shared libraries now. * config/alpha/xm-alpha.h: Cleanup, get MAKEVA_* defines right. * defs.h (CORE_ADDR): Make its type overridable via CORE_ADDR_TYPE, provide `unsigned int' default. * breakpoint.c (breakpoint_auto_delete): Delete only if we really stopped for the breakpoint. * stabsread.c, stabsread.h (define_symbol): Change valu parameter to a CORE_ADDR. * stabsread.c (read_range_type): Handle the case where the lower bound overflows and the upper doesn't and the range is legal. * infrun.c (resume): Do not step a breakpoint instruction if CANNOT_STEP_BREAKPOINT is defined. * inferior.h (CALL_DUMMY_LOCATION): New variant AT_ENTRY_POINT. Now that we have the bp_call_dummy breakpoint the call dummy code is no longer needed. PUSH_DUMMY_FRAME, PUSH_ARGUMENTS and FIX_CALL_DUMMY can be used to set up everything for the dummy. The breakpoint for the dummy is set at the entry point and thats it. * blockframe.c (inside_entry_file, inside_entry_func): Do not stop backtraces if pc is in the call dummy at the entry point. * infcmd.c (run_stack_dummy): Handle AT_ENTRY_POINT case. Use the expected breakpoint pc when setting up the frame for set_momentary_breakpoint. * symfile.c (entry_point_address): New function for AT_ENTRY_POINT support. * valops.c (call_function_by_hand): Handle AT_ENTRY_POINT case.
1993-10-05 19:44:57 +00:00
1993-06-23 22:59:35 +00:00
altos-xdep.o: altos-xdep.c $(defs_h) $(gdbcore_h) $(inferior_h)
annotate.o: annotate.c $(defs_h) annotate.h $(value_h) target.h $(gdbtypes_h)
arm-tdep.o: arm-tdep.c $(gdbcmd_h) $(gdbcore_h) $(inferior_h) $(defs_h) \
$(gdbcore_h)
1993-06-23 22:59:35 +00:00
* bcache.c, bcache.h: New files to implement a byte cache. * Makefile.in (SFILES): Add bcache.c. (symtab_h): Add bcache.h. (HFILES_NO_SRCDIR): add bcache.h (COMMON_OBJS): Add bcache.o (bcache.o): New target. * dbxread.c (start_psymtab): Make global_syms & static_syms type "partial_symbol **". * hpread.c (hpread_start_symtab): Ditto. * os9kread.c (os9k_start_psymtab): Ditto. * stabsread.h (start_psymtab): Ditto. * {symfile.c, symfile.h} (start_psymtab_common): Ditto. * maint.c (maintenance_print_statistics): Call print_symbol_bcache_statistics. * objfiles.c (allocate_objfile): Initialize psymbol bcache malloc and free pointers. * solib.c (allocate_rt_common_objfile): Ditto. * symfile.c (reread_symbols): Ditto. (free_objfile): Free psymbol bcache when objfile is freed. (objfile_relocate): Use new indirect psymbol pointers. * objfiles.h (struct objfile): Add psymbol cache. * symfile.c (compare_psymbols): Now passed pointers to pointers to psymbols. (reread_symbols): Free psymbol bcache when freeing other objfile resources. (add_psymbol_to_list, add_psymbol_addr_to_list): Initialize new psymbol using the psymbol bcache. (init_psymbol_list): Psymbol lists now contain pointers rather than the actual psymbols. * symfile.h (psymbol_allocation_list): Psymbol lists now dynamically grown arrays of pointers. (ADD_PSYMBOL_VT_TO_LIST): Initialize new symbol using the psymbol bcache. * symmisc.c (print_partial_symbols): Now takes pointer to pointer to partial symbol. (print_symbol_bcache_statistics): New function to print per objfile bcache statistics. (print_partial_symbol, print_partial_symbols, maintenance_check_symtabs, extend_psymbol_list): Account for change to pointer to pointer to partial symbol. * symtab.c (find_pc_psymbol, lookup_partial_symbol, decode_line_2, make_symbol_completion_list): Account for change to pointer to pointer to partial symbol. * symtab.h (bcache.h): Include. * xcoffread.c (xcoff_start_psymtab): Make global_syms & static_syms type "partial_symbol **".
1996-02-16 22:14:47 +00:00
bcache.o: bcache.c bcache.h $(defs_h)
1993-06-23 22:59:35 +00:00
blockframe.o: blockframe.c $(defs_h) $(gdbcore_h) $(inferior_h) \
objfiles.h symfile.h target.h
breakpoint.o: breakpoint.c $(defs_h) $(gdbcmd_h) $(gdbcore_h) \
$(inferior_h) language.h target.h gdbthread.h gdb_string.h
1993-06-23 22:59:35 +00:00
buildsym.o: buildsym.c $(bfd_h) buildsym.h complaints.h $(defs_h) \
objfiles.h symfile.h $(symtab_h) gdb_string.h
1993-06-23 22:59:35 +00:00
c-lang.o: c-lang.c c-lang.h $(defs_h) $(expression_h) $(gdbtypes_h) \
language.h parser-defs.h $(symtab_h)
c-typeprint.o: c-typeprint.c c-lang.h $(defs_h) $(expression_h) \
$(gdbcmd_h) $(gdbcore_h) $(gdbtypes_h) language.h $(symtab_h) \
target.h typeprint.h $(value_h) gdb_string.h
1993-06-23 22:59:35 +00:00
c-valprint.o: c-valprint.c $(defs_h) $(expression_h) $(gdbtypes_h) \
language.h $(symtab_h) valprint.h $(value_h)
f-lang.o: f-lang.c f-lang.h $(defs_h) $(expression_h) $(gdbtypes_h) \
language.h parser-defs.h $(symtab_h) gdb_string.h
f-typeprint.o: f-typeprint.c f-lang.h $(defs_h) $(expression_h) \
$(gdbcmd_h) $(gdbcore_h) $(gdbtypes_h) language.h $(symtab_h) \
target.h typeprint.h $(value_h) gdb_string.h
f-valprint.o: f-valprint.c $(defs_h) $(expression_h) $(gdbtypes_h) \
language.h $(symtab_h) valprint.h $(value_h) gdb_string.h
ch-exp.o: ch-exp.c ch-lang.h $(defs_h) language.h parser-defs.h $(bfd_h) symfile.h objfiles.h $(value_h)
1993-06-23 22:59:35 +00:00
ch-lang.o: ch-lang.c ch-lang.h $(defs_h) $(expression_h) $(gdbtypes_h) \
language.h parser-defs.h $(symtab_h)
ch-typeprint.o: ch-typeprint.c ch-lang.h $(defs_h) $(expression_h) \
$(gdbcmd_h) $(gdbcore_h) $(gdbtypes_h) language.h $(symtab_h) \
target.h $(value_h) typeprint.h gdb_string.h
1993-06-23 22:59:35 +00:00
ch-valprint.o: ch-valprint.c $(defs_h) $(expression_h) $(gdbtypes_h) \
language.h $(symtab_h) valprint.h $(value_h) c-lang.h
1993-06-23 22:59:35 +00:00
coff-solib.o: coff-solib.c $(defs_h)
1993-06-23 22:59:35 +00:00
coffread.o: coffread.c $(bfd_h) $(breakpoint_h) buildsym.h \
complaints.h $(defs_h) $(expression_h) $(gdbtypes_h) objfiles.h \
symfile.h $(symtab_h) gdb-stabs.h stabsread.h target.h \
gdb_string.h
1993-06-23 22:59:35 +00:00
command.o: command.c $(defs_h) $(expression_h) $(gdbcmd_h) \
* core-aout.c (fetch_core_registers): Cast core_reg_size to int before testing against reg_ptr. * eval.c (evaluate_subexp_standard): Cast type of TYPE_FN_FIELD_VOFFSET to int. * findvar.c (extract_signed_integer, extract_unsigned_integer, extract_long_unsigned_integer): Cast type of sizeof to int. * values.c (unpack_field_as_long, modify_field): Ditto. * valops.c (value_assign, call_function_by_hand): Ditto. * infcmd.c (do_registers_info): Ditto. * ser-tcp.c (tcp_open): Ditto * remote.c (putpkt): Ditto. * dcache.c (dcache_peek): Ditto. * dcache.c (dcache_poke): Ditto. * m2-exp.y (yylex): Ditto. * gnu-regex.c (re_match_2): Ditto. * f-lang.c (ADD_BF_SYMNUM, saved_bf_list_end, tmp_bf_ptr): Ifdef out unused macro definition and variables. * inftarg.c (proc_wait): Move from main.c to here, and make static. * valprint.c (val_print_string): Change bufsize from int to unsigned. * main.c (wait.h): Include * top.c (command_line_input): Remove unused variable "c". * f-typeprint.c (f_type_print_varspec_prefix): Add missing enum value TYPE_CODE_TYPEDEF to switch statement. (f_type_print_varspec_suffix): Add missing enum value TYPE_CODE_TYPEDEF to switch statement. * ch-exp.c (parse_primval): Add remaining enumeration values to switch statement, with no specific action. (ch_lex): Add LOC_UNRESOLVED in switch statement. (pushback_token): Ifdef out, since code using it is ifdef'd out. * stabsread.c (cleanup_undefined_types): Remove unused label "badtype". * objfiles.h (print_symbol_bcache_statistics): Add prototype. * maint.c (objfiles.h): Include. (maintenance_print_statistics): Remove unused variable "temp". * minsyms.c (lookup_minimal_symbol_solib_trampoline): Remove unused variable "found_file_symbol". * m2-exp.y (yylex): Add LOC_UNRESOLVED case to switch. * language.c (lang_bool_type): Use existing function local type variable rather than create block local variables. * solib.c (disable_break): Enclose in ifndef SVR4_SHARED_LIBS. * infptrace.c (wait.h, command.h): Include. * ser-tcp.c (gdb_string.h): Include * i386-tdep.c (codestream_seek): Change "place" to CORE_ADDR. (i386_get_frame_setup): Change "pc" from int to CORE_ADDR. * command.c (complete_on_enum): Make assignment used as truth value explictly check against NULL. (wait.h): Include. * infrun.c (wait_for_inferior): Ifdef out prologue_pc since code that uses it is ifdef'd out. * parser-defs.h: Add prototype for write_dollar_variable. * infrun.c: Add prototype for write_pc_pid. * breakpoint.h: Add prototype for re_enable_breakpoints_in_shlibs. * symmisc.c (bcache.h): Include. * bcache.h: Add prototype for print_bcache_statistics. * symfile.c: Include <time.h>. * printcmd.c (print_scalar_formatted): Change len to unsigned int. * valarith.c (value_equal): Cast result of TYPE_LENGTH to int. * valarith.c (value_binop): Change result_len, promoted_len1, and promoted_len2 to unsigned int. * valarith.c (value_subscripted_rvalue): Change elt_offs and elt_size to unsigned int. * valops.c (value_array): Change typelength to unsigned int. (destructor_name_p): Change len to unsigned int. * scm-lang.h (scm_parse): Add prototype for scm_unpack. * symfile.c (decrement_reading_symtab): Change return type to void. * valarith.c (value_subscript): Remove unused variable "word". (value_subscript): Remove unused variable "tint". * valops.c (auto_abandon): Ifdef out, since code using it is also ifdef'd out. * eval.c (init_array_element): Remove unused variable "val". * Makefile.in (values.o): Depends on scm-lang.h. (command.o): Depends upon wait_h. (ser-tcp.o): Depends upon gdb_string.h. (infptrace.o): Depends upon wait_h and command_h. (maint.o): Depends on objfiles.h and symfile.h. * values.c (allocate_repeat_value): Remove unused variable "element_type". (scm-lang.h): Include. * breakpoint.c (create_longjmp_breakpoint): Enclose in GET_LONGJMP_TARGET define, unused otherwise. * config/i386/nm-linux.h: Add prototypes for i386_insert_watchpoint, i386_remove_watchpoint and i386_stopped_by_watchpoint.
1996-03-30 05:45:10 +00:00
$(gdbtypes_h) $(symtab_h) $(value_h) gdb_string.h $(wait_h)
1993-06-23 22:59:35 +00:00
complaints.o: complaints.c complaints.h $(defs_h) $(gdbcmd_h)
convex-tdep.o: convex-tdep.c $(wait_h) $(defs_h) $(gdbcmd_h) \
$(gdbcore_h) $(inferior_h)
convex-xdep.o: convex-xdep.c $(defs_h) $(gdbcmd_h) $(gdbcore_h) \
$(inferior_h)
copying.o: copying.c $(defs_h) $(gdbcmd_h)
* coredep.c: Renamed to core-aout.c * core-svr4.c: Renamed to core-regset.c * Makefile.in (ALLDEPFILES): Account for renamings. * corelow.c (core_file_fns): Add, points to chain of structs. (add_core_fns): New function to build chain of structs. (get_core_registers): Modify to search core functions chain and call appropriate fetch_core_registers function based on core file flavour. * gdbcore.h (fetch_core_registers): Remove declaration. (struct core_fns): Define struct for core function info. * i386m3-nat.c: Update comment for filename change (coredep->core-aout) * a68v-nat.c (fetch_core_registers): Remove stub, not needed now. * alpha-nat.c (fetch_core_registers): Make static. (alpha_core_fns, _initialize_core_alpha): New struct and func. * core-aout.c (fetch_core_registers): Make static (aout_core_fns, _initialize_core_aout): New struct and func. * core-regset.c (fetch_core_registers): Make static. (regset_core_fns, _initialize_core_regset): New struct and func. * core-sol2.c (fetch_core_registers): Make static. (solaris_core_fns, _initialize_core_solaris): New struct and func. * hp300ux-nat.c (fetch_core_registers): Make static. (hp300ux_core_fns, _initialize_core_hp300ux): New struct and func. * i386aix-nat.c (fetch_core_registers): Make static. (i386aix_core_fns, _initialize_core_i386aix): New struct and func. * i386mach-nat.c (fetch_core_registers: Make static. (i386mach_core_fns, _initialize_core_i386mach): New struct and func. * irix4-nat.c (fetch_core_registers): Make static. (irix4_core_fns, _initialize_core_irix4): New struct and func. * irix5-nat.c (fetch_core_registers): (irix5_core_fns, _initialize_core_irix5): New struct and func. * lynx-nat.c (fetch_core_registers): Make static. (lynx_core_fns, _initialize_core_lynx): New struct and func. * mips-nat.c (fetch_core_registers): Make static. (mips_core_fns, _initialize_core_mips): New struct and func. * ns32km3-nat.c (fetch_core_registers): Remove stub. * rs6000-nat.c (fetch_core_registers): Make static. (rs6000_core_fns, _initialize_core_rs6000): New struct and func. * sparc-nat.c (fetch_core_registers): Make static. (sparc_core_fns, _initialize_core_sparc): New struct and func. * sun3-nat.c (fetch_core_registers): (sun3_core_fns, _initialize_core_sun3): New struct and func. * sun386-nat.c (fetch_core_registers): Remove stub. * ultra3-nat.c (fetch_core_registers): Make static. (ultra3_core_fns, _initialize_core_ultra3): New struct and func. * config/gould/pn.mh (XDEPFILES), config/i386/fbsd.mh (NATDEPFILES), config/i386/i386bsd.mh (NATDEPFILES), config/i386/i386m3.mh (XDEPFILES), config/i386/i386sco.mh (NATDEPFILES), config/i386/i386sco4.mh (NATDEPFILES), config/i386/i386v.mh (NATDEPFILES), config/i386/i386v32.mh (NATDEPFILES), config/i386/nbsd.mh (NATDEPFILES), config/i386/ptx.mh (XDEPFILES), config/i386/ptx4.mh (XDEPFILES), config/i386/symmetry.mh (NATDEPFILES), config/m68k/3b1.mh (XDEPFILES), config/m68k/cisco.mt (TDEPFILES), config/m68k/delta68.mh (NATDEPFILES), config/m68k/dpx2.mh (NATDEPFILES), config/m68k/hp300bsd.mh (NATDEPFILES), config/m68k/hp300hpux.mh (NATDEPFILES), config/m68k/isi.mh (XDEPFILES), config/m68k/news.mh (NATDEPFILES), config/m68k/news1000.mh (XDEPFILES), config/m88k/cxux.mh (NATDEPFILES), config/m88k/delta88.mh (NATDEPFILES), config/mips/littlemips.mh (XDEPFILES), config/mips/mipsm3.mh (XDEPFILES), config/ns32k/merlin.mh (XDEPFILES), config/ns32k/nbsd.mh (NATDEPFILES), config/ns32k/ns32km3.mh (NATDEPFILES), config/pa/hppabsd.mh (NATDEPFILES), config/pa/hppahpux.mh (NATDEPFILES), config/romp/rtbsd.mh (XDEPFILES), config/tahoe/tahoe.mh (XDEPFILES), config/vax/vaxbsd.mh (XDEPFILES), config/vax/vaxult.mh (NATDEPFILES), config/vax/vaxult2.mh (NATDEPFILES), Account for coredep.o to core-aout.o name change. * config/i386/i386dgux (NATDEPFILES), config/i386/i386sol2.mh (NATDEPFILES), config/i386/i386v4.mh (NATDEPFILES), config/i386/linux.mh (NATDEPFILES), config/i386/ncr3000.mh (NATDEPFILES), config/m68k/m68kv4.mh (NATDEPFILES), config/m88k/delta88v4.mh (NATDEPFILES), config/mips/mipsv4.mh (NATDEPFILES), Account for core-svr4.o to core-regset.o name change.
1996-01-11 20:08:15 +00:00
core-aout.o: core-aout.c $(defs_h) $(gdbcore_h) $(value_h) $(inferior_h)
core-sol2.o: core-sol2.c $(command_h) $(defs_h) $(gdbcore_h) \
$(inferior_h) target.h gdb_string.h
* coredep.c: Renamed to core-aout.c * core-svr4.c: Renamed to core-regset.c * Makefile.in (ALLDEPFILES): Account for renamings. * corelow.c (core_file_fns): Add, points to chain of structs. (add_core_fns): New function to build chain of structs. (get_core_registers): Modify to search core functions chain and call appropriate fetch_core_registers function based on core file flavour. * gdbcore.h (fetch_core_registers): Remove declaration. (struct core_fns): Define struct for core function info. * i386m3-nat.c: Update comment for filename change (coredep->core-aout) * a68v-nat.c (fetch_core_registers): Remove stub, not needed now. * alpha-nat.c (fetch_core_registers): Make static. (alpha_core_fns, _initialize_core_alpha): New struct and func. * core-aout.c (fetch_core_registers): Make static (aout_core_fns, _initialize_core_aout): New struct and func. * core-regset.c (fetch_core_registers): Make static. (regset_core_fns, _initialize_core_regset): New struct and func. * core-sol2.c (fetch_core_registers): Make static. (solaris_core_fns, _initialize_core_solaris): New struct and func. * hp300ux-nat.c (fetch_core_registers): Make static. (hp300ux_core_fns, _initialize_core_hp300ux): New struct and func. * i386aix-nat.c (fetch_core_registers): Make static. (i386aix_core_fns, _initialize_core_i386aix): New struct and func. * i386mach-nat.c (fetch_core_registers: Make static. (i386mach_core_fns, _initialize_core_i386mach): New struct and func. * irix4-nat.c (fetch_core_registers): Make static. (irix4_core_fns, _initialize_core_irix4): New struct and func. * irix5-nat.c (fetch_core_registers): (irix5_core_fns, _initialize_core_irix5): New struct and func. * lynx-nat.c (fetch_core_registers): Make static. (lynx_core_fns, _initialize_core_lynx): New struct and func. * mips-nat.c (fetch_core_registers): Make static. (mips_core_fns, _initialize_core_mips): New struct and func. * ns32km3-nat.c (fetch_core_registers): Remove stub. * rs6000-nat.c (fetch_core_registers): Make static. (rs6000_core_fns, _initialize_core_rs6000): New struct and func. * sparc-nat.c (fetch_core_registers): Make static. (sparc_core_fns, _initialize_core_sparc): New struct and func. * sun3-nat.c (fetch_core_registers): (sun3_core_fns, _initialize_core_sun3): New struct and func. * sun386-nat.c (fetch_core_registers): Remove stub. * ultra3-nat.c (fetch_core_registers): Make static. (ultra3_core_fns, _initialize_core_ultra3): New struct and func. * config/gould/pn.mh (XDEPFILES), config/i386/fbsd.mh (NATDEPFILES), config/i386/i386bsd.mh (NATDEPFILES), config/i386/i386m3.mh (XDEPFILES), config/i386/i386sco.mh (NATDEPFILES), config/i386/i386sco4.mh (NATDEPFILES), config/i386/i386v.mh (NATDEPFILES), config/i386/i386v32.mh (NATDEPFILES), config/i386/nbsd.mh (NATDEPFILES), config/i386/ptx.mh (XDEPFILES), config/i386/ptx4.mh (XDEPFILES), config/i386/symmetry.mh (NATDEPFILES), config/m68k/3b1.mh (XDEPFILES), config/m68k/cisco.mt (TDEPFILES), config/m68k/delta68.mh (NATDEPFILES), config/m68k/dpx2.mh (NATDEPFILES), config/m68k/hp300bsd.mh (NATDEPFILES), config/m68k/hp300hpux.mh (NATDEPFILES), config/m68k/isi.mh (XDEPFILES), config/m68k/news.mh (NATDEPFILES), config/m68k/news1000.mh (XDEPFILES), config/m88k/cxux.mh (NATDEPFILES), config/m88k/delta88.mh (NATDEPFILES), config/mips/littlemips.mh (XDEPFILES), config/mips/mipsm3.mh (XDEPFILES), config/ns32k/merlin.mh (XDEPFILES), config/ns32k/nbsd.mh (NATDEPFILES), config/ns32k/ns32km3.mh (NATDEPFILES), config/pa/hppabsd.mh (NATDEPFILES), config/pa/hppahpux.mh (NATDEPFILES), config/romp/rtbsd.mh (XDEPFILES), config/tahoe/tahoe.mh (XDEPFILES), config/vax/vaxbsd.mh (XDEPFILES), config/vax/vaxult.mh (NATDEPFILES), config/vax/vaxult2.mh (NATDEPFILES), Account for coredep.o to core-aout.o name change. * config/i386/i386dgux (NATDEPFILES), config/i386/i386sol2.mh (NATDEPFILES), config/i386/i386v4.mh (NATDEPFILES), config/i386/linux.mh (NATDEPFILES), config/i386/ncr3000.mh (NATDEPFILES), config/m68k/m68kv4.mh (NATDEPFILES), config/m88k/delta88v4.mh (NATDEPFILES), config/mips/mipsv4.mh (NATDEPFILES), Account for core-svr4.o to core-regset.o name change.
1996-01-11 20:08:15 +00:00
core-regset.o: core-regset.c $(command_h) $(defs_h) $(gdbcore_h) \
$(inferior_h) target.h gdb_string.h
1993-06-23 22:59:35 +00:00
corefile.o: corefile.c $(dis-asm_h) $(defs_h) $(gdbcmd_h) $(gdbcore_h) \
$(inferior_h) target.h language.h gdb_string.h
1993-06-23 22:59:35 +00:00
corelow.o: corelow.c $(command_h) $(defs_h) $(gdbcore_h) $(inferior_h) \
target.h gdbthread.h gdb_string.h
1993-06-23 22:59:35 +00:00
cp-valprint.o: cp-valprint.c $(defs_h) $(expression_h) $(gdbcmd_h) \
$(gdbtypes_h) $(symtab_h) $(value_h) gdb_string.h
1993-06-23 22:59:35 +00:00
dcache.o: dcache.c $(dcache_h) $(defs_h) $(gdbcmd_h) gdb_string.h $(gdbcore_h)
1993-08-31 22:13:29 +00:00
1993-06-23 22:59:35 +00:00
dbxread.o: dbxread.c $(breakpoint_h) buildsym.h $(command_h) \
complaints.h $(defs_h) $(expression_h) gdb-stabs.h $(gdbcore_h) \
$(gdbtypes_h) language.h objfiles.h partial-stab.h stabsread.h \
symfile.h $(symtab_h) target.h gdb_string.h
1993-06-23 22:59:35 +00:00
delta68-nat.o: delta68-nat.c $(defs_h)
demangle.o: demangle.c $(defs_h) $(gdbcmd_h) gdb_string.h
dpx2-nat.o: dpx2-nat.c $(defs_h) $(gdbcore_h) gdb_string.h
1993-06-23 22:59:35 +00:00
dstread.o: dstread.c gdb_string.h
1993-06-23 22:59:35 +00:00
dwarfread.o: dwarfread.c $(bfd_h) buildsym.h complaints.h $(defs_h) \
$(expression_h) $(gdbtypes_h) language.h objfiles.h symfile.h \
$(symtab_h) gdb_string.h
1993-06-23 22:59:35 +00:00
dwarf2read.o: dwarf2read.c $(bfd_h) buildsym.h $(defs_h) \
$(expression_h) $(gdbtypes_h) language.h objfiles.h symfile.h \
$(symtab_h) gdb_string.h
1993-06-23 22:59:35 +00:00
elfread.o: elfread.c $(bfd_h) buildsym.h complaints.h $(defs_h) \
gdb-stabs.h objfiles.h symfile.h $(symtab_h) gdb_string.h \
$(BFD_SRC)/elf-bfd.h $(INCLUDE_DIR)/elf/mips.h
1993-06-23 22:59:35 +00:00
environ.o: environ.c $(defs_h) environ.h $(gdbcore_h) gdb_string.h
1993-06-23 22:59:35 +00:00
eval.o: eval.c $(bfd_h) $(defs_h) $(expression_h) $(frame_h) \
$(gdbtypes_h) language.h $(symtab_h) target.h $(value_h) \
gdb_string.h
1993-06-23 22:59:35 +00:00
exec.o: exec.c $(defs_h) $(gdbcmd_h) $(gdbcore_h) $(inferior_h) \
target.h language.h gdb_string.h
1993-06-23 22:59:35 +00:00
expprint.o: expprint.c $(defs_h) $(expression_h) $(gdbtypes_h) \
language.h parser-defs.h $(symtab_h) $(value_h)
findvar.o: findvar.c $(defs_h) $(gdbcore_h) $(inferior_h) target.h \
gdb_string.h
1993-06-23 22:59:35 +00:00
fork-child.o: fork-child.c $(wait_h) $(defs_h) $(gdbcore_h) \
$(inferior_h) target.h terminal.h gdbthread.h gdb_string.h
1993-06-23 22:59:35 +00:00
# start-sanitize-gdbtk
gdbtk.o: gdbtk.c $(defs_h) $(symtab_h) $(inferior_h) $(command_h) \
$(bfd_h) symfile.h objfiles.h target.h gdb_string.h
$(CC) -c $(INTERNAL_CFLAGS) $(TCL_CFLAGS) $(TK_CFLAGS) $(X11_CFLAGS) \
$(srcdir)/gdbtk.c -DGDBTK_LIBRARY=\"$(datadir)/gdbtcl\"
# end-sanitize-gdbtk
1993-06-23 22:59:35 +00:00
gdbtypes.o: gdbtypes.c $(bfd_h) complaints.h $(defs_h) $(expression_h) \
$(gdbtypes_h) language.h objfiles.h symfile.h $(symtab_h) target.h \
$(value_h) gdb_string.h
1993-06-23 22:59:35 +00:00
go32-xdep.o: go32-xdep.c
gould-tdep.o: gould-tdep.c $(OP_INCLUDE)/np1.h $(defs_h) $(frame_h) \
1993-06-23 22:59:35 +00:00
$(gdbcore_h) $(symtab_h)
gould-xdep.o: gould-xdep.c $(defs_h) $(gdbcore_h) $(inferior_h)
1993-06-23 22:59:35 +00:00
h8300-tdep.o: h8300-tdep.c $(defs_h) $(frame_h) $(symtab_h)
h8500-tdep.o: h8500-tdep.c $(bfd_h) $(dis-asm_h) $(defs_h) \
$(expression_h) $(frame_h) $(gdbcmd_h) $(gdbtypes_h) $(symtab_h) \
$(value_h)
hp300ux-nat.o: hp300ux-nat.c $(defs_h) $(gdbcore_h) $(inferior_h)
hppa-tdep.o: hppa-tdep.c $(wait_h) $(defs_h) $(gdbcmd_h) $(gdbcore_h) \
$(inferior_h) objfiles.h symfile.h target.h
hppab-nat.o: hppab-nat.c $(bfd_h) $(defs_h) $(inferior_h) target.h
hppah-nat.o: hppah-nat.c $(bfd_h) $(defs_h) $(inferior_h) target.h
i386-tdep.o: i386-tdep.c $(defs_h) $(gdbcore_h) $(inferior_h) target.h \
gdb_string.h
i386aix-nat.o: i386aix-nat.c $(defs_h) $(frame_h) $(inferior_h) \
language.h $(gdbcore_h) $(floatformat_h) target.h
1993-06-23 22:59:35 +00:00
i386b-nat.o: i386b-nat.c $(defs_h)
i386ly-nat.o: i386ly-nat.c $(defs_h) $(frame_h) $(inferior_h) target.h
i386ly-tdep.o: i386ly-tdep.c $(defs_h) $(inferior_h) target.h $(gdbcore_h)
i386m3-nat.o: i386m3-nat.c $(defs_h) $(inferior_h) $(floatformat_h) target.h
1993-06-23 22:59:35 +00:00
i386mach-nat.o: i386mach-nat.c $(defs_h) $(gdbcore_h) $(inferior_h)
i386v-nat.o: i386v-nat.c $(floatformat_h) $(defs_h) $(gdbcore_h) \
1993-06-23 22:59:35 +00:00
$(inferior_h) language.h target.h
i386v4-nat.o: i386v4-nat.c $(defs_h)
i387-tdep.o: i387-tdep.c $(floatformat_h) $(defs_h) $(gdbcore_h) \
1993-06-23 22:59:35 +00:00
$(inferior_h) language.h
i960-tdep.o: i960-tdep.c $(floatformat_h) $(defs_h) $(expression_h) \
$(frame_h) $(gdbtypes_h) $(symtab_h) $(value_h) $(gdbcore_h)
1993-06-23 22:59:35 +00:00
infcmd.o: infcmd.c $(defs_h) environ.h $(gdbcmd_h) $(gdbcore_h) \
$(inferior_h) target.h language.h gdb_string.h
1993-06-23 22:59:35 +00:00
inflow.o: inflow.c $(bfd_h) $(command_h) $(defs_h) $(inferior_h) \
signals.h target.h terminal.h gdbthread.h gdb_string.h
1993-06-23 22:59:35 +00:00
infptrace.o: infptrace.c $(defs_h) $(gdbcore_h) $(inferior_h) target.h \
* core-aout.c (fetch_core_registers): Cast core_reg_size to int before testing against reg_ptr. * eval.c (evaluate_subexp_standard): Cast type of TYPE_FN_FIELD_VOFFSET to int. * findvar.c (extract_signed_integer, extract_unsigned_integer, extract_long_unsigned_integer): Cast type of sizeof to int. * values.c (unpack_field_as_long, modify_field): Ditto. * valops.c (value_assign, call_function_by_hand): Ditto. * infcmd.c (do_registers_info): Ditto. * ser-tcp.c (tcp_open): Ditto * remote.c (putpkt): Ditto. * dcache.c (dcache_peek): Ditto. * dcache.c (dcache_poke): Ditto. * m2-exp.y (yylex): Ditto. * gnu-regex.c (re_match_2): Ditto. * f-lang.c (ADD_BF_SYMNUM, saved_bf_list_end, tmp_bf_ptr): Ifdef out unused macro definition and variables. * inftarg.c (proc_wait): Move from main.c to here, and make static. * valprint.c (val_print_string): Change bufsize from int to unsigned. * main.c (wait.h): Include * top.c (command_line_input): Remove unused variable "c". * f-typeprint.c (f_type_print_varspec_prefix): Add missing enum value TYPE_CODE_TYPEDEF to switch statement. (f_type_print_varspec_suffix): Add missing enum value TYPE_CODE_TYPEDEF to switch statement. * ch-exp.c (parse_primval): Add remaining enumeration values to switch statement, with no specific action. (ch_lex): Add LOC_UNRESOLVED in switch statement. (pushback_token): Ifdef out, since code using it is ifdef'd out. * stabsread.c (cleanup_undefined_types): Remove unused label "badtype". * objfiles.h (print_symbol_bcache_statistics): Add prototype. * maint.c (objfiles.h): Include. (maintenance_print_statistics): Remove unused variable "temp". * minsyms.c (lookup_minimal_symbol_solib_trampoline): Remove unused variable "found_file_symbol". * m2-exp.y (yylex): Add LOC_UNRESOLVED case to switch. * language.c (lang_bool_type): Use existing function local type variable rather than create block local variables. * solib.c (disable_break): Enclose in ifndef SVR4_SHARED_LIBS. * infptrace.c (wait.h, command.h): Include. * ser-tcp.c (gdb_string.h): Include * i386-tdep.c (codestream_seek): Change "place" to CORE_ADDR. (i386_get_frame_setup): Change "pc" from int to CORE_ADDR. * command.c (complete_on_enum): Make assignment used as truth value explictly check against NULL. (wait.h): Include. * infrun.c (wait_for_inferior): Ifdef out prologue_pc since code that uses it is ifdef'd out. * parser-defs.h: Add prototype for write_dollar_variable. * infrun.c: Add prototype for write_pc_pid. * breakpoint.h: Add prototype for re_enable_breakpoints_in_shlibs. * symmisc.c (bcache.h): Include. * bcache.h: Add prototype for print_bcache_statistics. * symfile.c: Include <time.h>. * printcmd.c (print_scalar_formatted): Change len to unsigned int. * valarith.c (value_equal): Cast result of TYPE_LENGTH to int. * valarith.c (value_binop): Change result_len, promoted_len1, and promoted_len2 to unsigned int. * valarith.c (value_subscripted_rvalue): Change elt_offs and elt_size to unsigned int. * valops.c (value_array): Change typelength to unsigned int. (destructor_name_p): Change len to unsigned int. * scm-lang.h (scm_parse): Add prototype for scm_unpack. * symfile.c (decrement_reading_symtab): Change return type to void. * valarith.c (value_subscript): Remove unused variable "word". (value_subscript): Remove unused variable "tint". * valops.c (auto_abandon): Ifdef out, since code using it is also ifdef'd out. * eval.c (init_array_element): Remove unused variable "val". * Makefile.in (values.o): Depends on scm-lang.h. (command.o): Depends upon wait_h. (ser-tcp.o): Depends upon gdb_string.h. (infptrace.o): Depends upon wait_h and command_h. (maint.o): Depends on objfiles.h and symfile.h. * values.c (allocate_repeat_value): Remove unused variable "element_type". (scm-lang.h): Include. * breakpoint.c (create_longjmp_breakpoint): Enclose in GET_LONGJMP_TARGET define, unused otherwise. * config/i386/nm-linux.h: Add prototypes for i386_insert_watchpoint, i386_remove_watchpoint and i386_stopped_by_watchpoint.
1996-03-30 05:45:10 +00:00
gdb_string.h $(wait_h) $(command_h)
1993-06-23 22:59:35 +00:00
infrun.o: infrun.c $(wait_h) $(defs_h) $(gdbcmd_h) $(gdbcore_h) \
$(inferior_h) target.h gdbthread.h gdb_string.h
1993-06-23 22:59:35 +00:00
inftarg.o: inftarg.c $(wait_h) $(defs_h) $(gdbcore_h) $(inferior_h) \
target.h terminal.h $(command_h)
1993-06-23 22:59:35 +00:00
irix4-nat.o: irix4-nat.c $(defs_h) $(inferior_h) $(gdbcore_h)
irix5-nat.o: irix5-nat.c $(defs_h) $(inferior_h) $(gdbcore_h) target.h \
$(symtab_h) symfile.h objfiles.h $(command_h) $(frame_h) gnu-regex.h \
language.h gdb_string.h
1993-06-23 22:59:35 +00:00
isi-xdep.o: isi-xdep.c
language.o: language.c $(bfd_h) $(defs_h) $(expression_h) $(frame_h) \
$(gdbcmd_h) $(gdbtypes_h) language.h parser-defs.h $(symtab_h) \
target.h $(value_h) gdb_string.h
1993-06-23 22:59:35 +00:00
lynx-nat.o: lynx-nat.c $(defs_h) $(frame_h) $(inferior_h) $(gdbcore_h) \
target.h
1993-06-23 22:59:35 +00:00
m2-lang.o: m2-lang.c $(defs_h) $(expression_h) $(gdbtypes_h) \
language.h m2-lang.h parser-defs.h $(symtab_h)
m2-typeprint.o: m2-typeprint.c $(defs_h) $(expression_h) $(gdbcmd_h) \
$(gdbcore_h) $(gdbtypes_h) language.h m2-lang.h $(symtab_h) target.h \
$(value_h) gdb_string.h
1993-06-23 22:59:35 +00:00
m2-valprint.o: m2-valprint.c $(defs_h) $(gdbtypes_h) $(symtab_h) \
valprint.h m2-lang.h
1993-06-23 22:59:35 +00:00
m3-nat.o: m3-nat.c $(defs_h) $(inferior_h) $(value_h) language.h target.h \
$(wait_h) $(gdbcmd_h) $(gdbcore_h)
m68k-tdep.o: m68k-tdep.c $(defs_h) $(frame_h) $(symtab_h) $(value_h) \
$(gdbcore_h) gdb_string.h
m68kly-nat.o: m68kly-nat.c $(defs_h) $(frame_h) $(inferior_h) target.h
1993-06-23 22:59:35 +00:00
m88k-nat.o: m88k-nat.c $(defs_h) $(gdbcore_h) $(inferior_h)
1993-06-23 22:59:35 +00:00
m88k-tdep.o: m88k-tdep.c $(defs_h) $(gdbcore_h) $(inferior_h)
mac-nat.o: mac-nat.c $(defs_h) gdb_string.h
main.o: main.c top.h $(defs_h) gdb_string.h
1993-06-23 22:59:35 +00:00
maint.o: maint.c $(defs_h) $(gdbcmd_h) $(gdbtypes_h) $(symtab_h) language.h \
* core-aout.c (fetch_core_registers): Cast core_reg_size to int before testing against reg_ptr. * eval.c (evaluate_subexp_standard): Cast type of TYPE_FN_FIELD_VOFFSET to int. * findvar.c (extract_signed_integer, extract_unsigned_integer, extract_long_unsigned_integer): Cast type of sizeof to int. * values.c (unpack_field_as_long, modify_field): Ditto. * valops.c (value_assign, call_function_by_hand): Ditto. * infcmd.c (do_registers_info): Ditto. * ser-tcp.c (tcp_open): Ditto * remote.c (putpkt): Ditto. * dcache.c (dcache_peek): Ditto. * dcache.c (dcache_poke): Ditto. * m2-exp.y (yylex): Ditto. * gnu-regex.c (re_match_2): Ditto. * f-lang.c (ADD_BF_SYMNUM, saved_bf_list_end, tmp_bf_ptr): Ifdef out unused macro definition and variables. * inftarg.c (proc_wait): Move from main.c to here, and make static. * valprint.c (val_print_string): Change bufsize from int to unsigned. * main.c (wait.h): Include * top.c (command_line_input): Remove unused variable "c". * f-typeprint.c (f_type_print_varspec_prefix): Add missing enum value TYPE_CODE_TYPEDEF to switch statement. (f_type_print_varspec_suffix): Add missing enum value TYPE_CODE_TYPEDEF to switch statement. * ch-exp.c (parse_primval): Add remaining enumeration values to switch statement, with no specific action. (ch_lex): Add LOC_UNRESOLVED in switch statement. (pushback_token): Ifdef out, since code using it is ifdef'd out. * stabsread.c (cleanup_undefined_types): Remove unused label "badtype". * objfiles.h (print_symbol_bcache_statistics): Add prototype. * maint.c (objfiles.h): Include. (maintenance_print_statistics): Remove unused variable "temp". * minsyms.c (lookup_minimal_symbol_solib_trampoline): Remove unused variable "found_file_symbol". * m2-exp.y (yylex): Add LOC_UNRESOLVED case to switch. * language.c (lang_bool_type): Use existing function local type variable rather than create block local variables. * solib.c (disable_break): Enclose in ifndef SVR4_SHARED_LIBS. * infptrace.c (wait.h, command.h): Include. * ser-tcp.c (gdb_string.h): Include * i386-tdep.c (codestream_seek): Change "place" to CORE_ADDR. (i386_get_frame_setup): Change "pc" from int to CORE_ADDR. * command.c (complete_on_enum): Make assignment used as truth value explictly check against NULL. (wait.h): Include. * infrun.c (wait_for_inferior): Ifdef out prologue_pc since code that uses it is ifdef'd out. * parser-defs.h: Add prototype for write_dollar_variable. * infrun.c: Add prototype for write_pc_pid. * breakpoint.h: Add prototype for re_enable_breakpoints_in_shlibs. * symmisc.c (bcache.h): Include. * bcache.h: Add prototype for print_bcache_statistics. * symfile.c: Include <time.h>. * printcmd.c (print_scalar_formatted): Change len to unsigned int. * valarith.c (value_equal): Cast result of TYPE_LENGTH to int. * valarith.c (value_binop): Change result_len, promoted_len1, and promoted_len2 to unsigned int. * valarith.c (value_subscripted_rvalue): Change elt_offs and elt_size to unsigned int. * valops.c (value_array): Change typelength to unsigned int. (destructor_name_p): Change len to unsigned int. * scm-lang.h (scm_parse): Add prototype for scm_unpack. * symfile.c (decrement_reading_symtab): Change return type to void. * valarith.c (value_subscript): Remove unused variable "word". (value_subscript): Remove unused variable "tint". * valops.c (auto_abandon): Ifdef out, since code using it is also ifdef'd out. * eval.c (init_array_element): Remove unused variable "val". * Makefile.in (values.o): Depends on scm-lang.h. (command.o): Depends upon wait_h. (ser-tcp.o): Depends upon gdb_string.h. (infptrace.o): Depends upon wait_h and command_h. (maint.o): Depends on objfiles.h and symfile.h. * values.c (allocate_repeat_value): Remove unused variable "element_type". (scm-lang.h): Include. * breakpoint.c (create_longjmp_breakpoint): Enclose in GET_LONGJMP_TARGET define, unused otherwise. * config/i386/nm-linux.h: Add prototypes for i386_insert_watchpoint, i386_remove_watchpoint and i386_stopped_by_watchpoint.
1996-03-30 05:45:10 +00:00
$(expression_h) objfiles.h symfile.h
mdebugread.o: mdebugread.c buildsym.h complaints.h $(bfd_h) $(defs_h) \
$(expression_h) gdb-stabs.h $(gdbcore_h) $(gdbtypes_h) language.h \
objfiles.h partial-stab.h stabsread.h symfile.h $(symtab_h) \
gdb_string.h
mipsm3-nat.o: mipsm3-nat.c $(defs_h) $(inferior_h)
os9kread.o: os9kread.c buildsym.h complaints.h $(bfd_h) $(defs_h) \
$(expression_h) gdb-stabs.h $(gdbcore_h) $(gdbtypes_h) language.h \
objfiles.h stabsread.h symfile.h $(symtab_h) \
target.h gdb_string.h
1993-06-23 22:59:35 +00:00
mem-break.o: mem-break.c $(defs_h)
minsyms.o: minsyms.c $(bfd_h) $(defs_h) objfiles.h symfile.h \
$(symtab_h) gdb_string.h
1993-06-23 22:59:35 +00:00
mips-nat.o: mips-nat.c $(defs_h) $(gdbcore_h) $(inferior_h)
mips-tdep.o: mips-tdep.c $(defs_h) $(gdbcmd_h) $(gdbcore_h) \
$(inferior_h) language.h objfiles.h symfile.h gdb_string.h
1993-06-23 22:59:35 +00:00
mipsread.o: mipsread.c buildsym.h complaints.h $(bfd_h) $(defs_h) \
1993-06-23 22:59:35 +00:00
$(expression_h) gdb-stabs.h $(gdbcore_h) $(gdbtypes_h) language.h \
objfiles.h partial-stab.h stabsread.h symfile.h $(symtab_h) \
gdb_string.h
1993-06-23 22:59:35 +00:00
gcc -Wall lint: * breakpoint.c (watchpoint_check): Remove unused variable b. * stack.c (print_frame_info): Move sp and buf inside #if. * eval.c (evaluate_subexp): Remove unused variables pp, mangle_ptr, ptr, and mangle_tstr. * valarith.c (value_x_binop): Remove unused variables mangle_tstr and mangle_ptr. * symtab.c (lookup_symtab): Put variable copy inside #if. (decode_line_1): Put variable q1 inside #if 0. * target.h: Declare target_link. * infrun.c (wait_for_inferior): Remove unused variables signame. * remote.c (remote_resume): Remove unused variable name. * c-exp.y (parse_number): Parenthesize operand of shift. * dbxread.c (record_minimal_symbol): Parenthesize operand of && (this is a semantic change, the warning seems to have detected a bug). * dbxread.c (end_psymtab): Move variable p1 inside #if. * coffread.c: Move variable temptype inside #if. * ch-typeprint.c (chill_type_print_base): Remove unused variable name. * ch-valprint.c: #include typeprint.h and ch-lang.h. (chill_val_print): Remove unused variable in_range. (chill_val_print): Remove statement "length > TYPE_LENGTH (type);". (chill_val_print): Add default case for switch. * stabsread.h: Declare stabsect_build_psymtabs. * os9kread.c (read_minimal_symbols): Make this return void. (os9k_symfile_read): Remove unused variables stb_exist and val. (os9k_symfile_init): Remove unused variable val. (fill_sym): Remove unused variable id. (read_os9k_psymtab): Put variable back_to inside #if 0. Remove unused variable nsl. Remove unused variable symfile_bfd. #if 0 unused variables lbrac_unmatched_complaint and lbrac_mismatch_complaint. Remove declaration for non-existent function os9k_next_symbol_text. * annotate.c, annotate.h: New files, containing a function for each annotation which outputs it. * Move breakpoints_changed from breakpoint.c to annotate.c. * breakpoint.c, blockframe.c, infrun.c, cp-valprint.c, main.c, printcmd.c, source.c, stack.c, utils.c, valprint.c: Use annotate.c functions to output annotations. * Makefile.in (OBS): Add annotate.o.
1994-05-13 18:18:57 +00:00
mipsv4-nat.o: mipsv4-nat.c $(defs_h) $(gdbcore_h) $(inferior_h) target.h
monitor.o: monitor.c monitor.h $(bfd_h) $(wait_h) $(defs_h) $(gdbcmd_h) \
$(inferior_h) target.h serial.h terminal.h gdb_string.h
1993-06-23 22:59:35 +00:00
news-xdep.o: news-xdep.c
Onindy.o: nindy-share/Onindy.c $(wait_h) nindy-share/block_io.h \
nindy-share/env.h
1993-06-23 22:59:35 +00:00
$(CC) -c $(INTERNAL_CFLAGS) $(srcdir)/nindy-share/Onindy.c
nindy.o: nindy-share/nindy.c $(wait_h) nindy-share/block_io.h \
nindy-share/env.h
1993-06-23 22:59:35 +00:00
$(CC) -c $(INTERNAL_CFLAGS) $(srcdir)/nindy-share/nindy.c
nlmread.o: nlmread.c $(bfd_h) buildsym.h complaints.h $(defs_h) \
gdb-stabs.h objfiles.h symfile.h $(symtab_h) stabsread.h \
gdb_string.h
ns32km3-nat.o: ns32km3-nat.c $(defs_h) $(inferior_h)
ttyflush.o: nindy-share/ttyflush.c
1993-06-23 22:59:35 +00:00
$(CC) -c $(INTERNAL_CFLAGS) $(srcdir)/nindy-share/ttyflush.c
nindy-tdep.o: nindy-tdep.c $(defs_h) $(frame_h) $(symtab_h) $(gdbcore_h)
1993-06-23 22:59:35 +00:00
ns32k-tdep.o: ns32k-tdep.c $(bfd_h) $(dis-asm_h) $(defs_h)
1993-06-23 22:59:35 +00:00
objfiles.o: objfiles.c $(bfd_h) $(defs_h) objfiles.h symfile.h \
$(symtab_h) gdb_string.h
1993-06-23 22:59:35 +00:00
Changes to support alpha OSF/1 in native mode. * alpha-nat.c, alpha-tdep.c, config/alpha/alpha-osf1.mt, config/alpha/nm-alpha.h, config/alpha/tm-alpha.h, osfsolib.c: New files. * Makefile.in: Add new files and dependencies. * configure.in: Add alpha target. * config/alpha/alpha-osf1.mh (NATDEPFILES): Add osfsolib.o * config/alpha/alpha-osf1.mh (MH_CFLAGS): Remove, we can handle shared libraries now. * config/alpha/xm-alpha.h: Cleanup, get MAKEVA_* defines right. * defs.h (CORE_ADDR): Make its type overridable via CORE_ADDR_TYPE, provide `unsigned int' default. * breakpoint.c (breakpoint_auto_delete): Delete only if we really stopped for the breakpoint. * stabsread.c, stabsread.h (define_symbol): Change valu parameter to a CORE_ADDR. * stabsread.c (read_range_type): Handle the case where the lower bound overflows and the upper doesn't and the range is legal. * infrun.c (resume): Do not step a breakpoint instruction if CANNOT_STEP_BREAKPOINT is defined. * inferior.h (CALL_DUMMY_LOCATION): New variant AT_ENTRY_POINT. Now that we have the bp_call_dummy breakpoint the call dummy code is no longer needed. PUSH_DUMMY_FRAME, PUSH_ARGUMENTS and FIX_CALL_DUMMY can be used to set up everything for the dummy. The breakpoint for the dummy is set at the entry point and thats it. * blockframe.c (inside_entry_file, inside_entry_func): Do not stop backtraces if pc is in the call dummy at the entry point. * infcmd.c (run_stack_dummy): Handle AT_ENTRY_POINT case. Use the expected breakpoint pc when setting up the frame for set_momentary_breakpoint. * symfile.c (entry_point_address): New function for AT_ENTRY_POINT support. * valops.c (call_function_by_hand): Handle AT_ENTRY_POINT case.
1993-10-05 19:44:57 +00:00
osfsolib.o: osfsolib.c $(command_h) $(defs_h) $(gdbcore_h) $(inferior_h) \
objfiles.h gnu-regex.h symfile.h target.h language.h gdb_string.h
Changes to support alpha OSF/1 in native mode. * alpha-nat.c, alpha-tdep.c, config/alpha/alpha-osf1.mt, config/alpha/nm-alpha.h, config/alpha/tm-alpha.h, osfsolib.c: New files. * Makefile.in: Add new files and dependencies. * configure.in: Add alpha target. * config/alpha/alpha-osf1.mh (NATDEPFILES): Add osfsolib.o * config/alpha/alpha-osf1.mh (MH_CFLAGS): Remove, we can handle shared libraries now. * config/alpha/xm-alpha.h: Cleanup, get MAKEVA_* defines right. * defs.h (CORE_ADDR): Make its type overridable via CORE_ADDR_TYPE, provide `unsigned int' default. * breakpoint.c (breakpoint_auto_delete): Delete only if we really stopped for the breakpoint. * stabsread.c, stabsread.h (define_symbol): Change valu parameter to a CORE_ADDR. * stabsread.c (read_range_type): Handle the case where the lower bound overflows and the upper doesn't and the range is legal. * infrun.c (resume): Do not step a breakpoint instruction if CANNOT_STEP_BREAKPOINT is defined. * inferior.h (CALL_DUMMY_LOCATION): New variant AT_ENTRY_POINT. Now that we have the bp_call_dummy breakpoint the call dummy code is no longer needed. PUSH_DUMMY_FRAME, PUSH_ARGUMENTS and FIX_CALL_DUMMY can be used to set up everything for the dummy. The breakpoint for the dummy is set at the entry point and thats it. * blockframe.c (inside_entry_file, inside_entry_func): Do not stop backtraces if pc is in the call dummy at the entry point. * infcmd.c (run_stack_dummy): Handle AT_ENTRY_POINT case. Use the expected breakpoint pc when setting up the frame for set_momentary_breakpoint. * symfile.c (entry_point_address): New function for AT_ENTRY_POINT support. * valops.c (call_function_by_hand): Handle AT_ENTRY_POINT case.
1993-10-05 19:44:57 +00:00
somread.o: somread.c $(bfd_h) buildsym.h complaints.h $(defs_h) \
gdb-stabs.h objfiles.h symfile.h $(symtab_h) gdb_string.h
1993-06-23 22:59:35 +00:00
somsolib.o: somsolib.c $(defs_h)
* Makefile.in: Add rule for hpux-thread.o (needs special header files). * (SUBDIRS): Remove mswin. * Change procedure for creating init.c. Speeds things up quite a bit. * config.in configure configure.in: Check for select, poll. * Check for OSF header files before including hpux-thread.o. * Don't configure doc or testsuite when building under MSVC. * findvar.c value.h (read_register_pid write_register_pid): Make global. Needed for hppa-tdep.c. * (supply_register): Don't set pid to inferior_pid when supplying registers. * hppa-tdep.c (saved_pc_after_call): frame_saved_pc -> FRAME_SAVED_PC. * (frame_saved_pc): Change name to hppa_frame_saved_pc. * (hppa_pop_frame): Don't use a pid of 0 with target_write_pc. Use write_pc instead, which uses the correct pid. * (target_read_pc target_write_pc): Use read/write_register_pid instead of read/write_register to preserve the pid passed in. * inftarg.c (child_can_run): Add flag child_suppress_run to allow hpux-threads.c to override this as a runnable target. * config/pa/nm-hppah.h: Define target_new_objfile and target_pid_to_str. * config/pa/tm-hppa.h (FRAME_SAVED_PC): Use hppa_frame_saved_pc instead of frame_saved_pc. * config/m68k/tm-m68k.h: Define TARGET_M68K for Wingdb. * config/m68k/tm-monitor.h: Use FRAME_CHAIN_VALID_ALTERNATE, since we can't easily determine the start file bounds with ELF. * config/mips/tm-mips.h: Define TARGET_MIPS for Wingdb. * hpux-thread.c: New file for HPUX/OSF thread support. * osf-share/{README AT386/cma_thread_io.h HP800/cma_thread_io.h RIOS/cma_thread_io.h cma_attr.h cma_deb_core.h cma_debug_client.h cma_errors.h cma_handle.h cma_init.h cma_list.h cma_mutex.h cma_sched.h cma_semaphore_defs.h cma_sequence.h cma_stack.h cma_stack_int.h cma_tcb_defs.h cma_util.h}: New files for OSF thread support.
1996-10-08 17:06:17 +00:00
hpux-thread.o: hpux-thread.c $(defs_h) gdbthread.h target.h inferior.h
$(CC) -c $(INTERNAL_CFLAGS) -I$(srcdir)/osf-share \
-I$(srcdir)/osf-share/HP800 -I/usr/include/dce $(srcdir)/hpux-thread.c
hpread.o: hpread.c $(bfd_h) buildsym.h complaints.h $(defs_h) \
gdb-stabs.h objfiles.h symfile.h $(symtab_h) gdb_string.h
1993-06-23 22:59:35 +00:00
parse.o: parse.c $(command_h) $(defs_h) $(expression_h) $(frame_h) \
$(gdbtypes_h) language.h parser-defs.h $(symtab_h) $(value_h) \
gdb_string.h
1993-06-23 22:59:35 +00:00
ppcbug-rom.o: ppcbug-rom.c monitor.h $(bfd_h) $(wait_h) $(defs_h) $(gdbcmd_h) \
$(inferior_h) target.h serial.h terminal.h
1993-06-23 22:59:35 +00:00
printcmd.o: printcmd.c $(breakpoint_h) $(defs_h) $(expression_h) \
$(gdbcmd_h) $(gdbcore_h) $(gdbtypes_h) language.h objfiles.h \
symfile.h $(symtab_h) target.h gdb_string.h
1993-06-23 22:59:35 +00:00
procfs.o: procfs.c $(command_h) $(defs_h) $(gdbcore_h) $(inferior_h) \
target.h gdb_string.h
1993-06-23 22:59:35 +00:00
pyr-tdep.o: pyr-tdep.c $(defs_h)
1993-06-23 22:59:35 +00:00
pyr-xdep.o: pyr-xdep.c $(defs_h) $(gdbcore_h) $(inferior_h)
gnu-regex.o: gnu-regex.c gnu-regex.h $(defs_h) gdb_string.h
1993-06-23 22:59:35 +00:00
remote-adapt.o: remote-adapt.c $(wait_h) $(defs_h) $(gdbcore_h) \
$(inferior_h) target.h terminal.h gdb_string.h
remote-arc.o: remote-arc.c gdb_string.h
1993-06-23 22:59:35 +00:00
remote-array.o: remote-array.c $(wait_h) $(defs_h) $(gdbcore_h) target.h \
gdb_string.h $(command_h) serial.h monitor.h $(remote_utils_h)
Thu Sep 28 14:32:11 1995 steve chamberlain <sac@slash.cygnus.com> * callback.[ch]: New files. * remote-rdp.c: Support for the ARM RDP monitor. * Makefile: Update. * arm-tdep.c (arm_othernames): New. (_initialize_arm_tdep): install 'othernames' command. (arm_nullified_insn, shifted_reg_val, arm_get_next_pc): New. * configure.in: Check for termios.h, termio.h and sgtty.h. (i[345]86-*-win32*): New host. * configure: Regenerated. * inflow.c: Clean up inclusions. * main.c (main): Check for WINGDB, not WIN32. * printcmd.c (do_examine): Put QUIT test in loop. * remote-hms.c (e7000_load): Delete. (hms_ops): Point to generic_load instead. * remote-hms.c (hms_ops): Point to generic_load. * remote-sim.c (sim_callback_write_stdout): Becomes gdbsim_write_stdout. (gdbsim_load): Call generic_load. * remote-utils.c (gr_load_image): Delete. * ser-unix.c (terminal.h): Include instead of havig own #if tree. (hardwire_flush_input): Reset input buffer too. * source.c (openp): If WIN32 then open file in binary mode. * terminal.h: Configure IO mechanism using autoconf defines if available and not overriden. * utils.c (quit, pollquit, notice_quit): WIN32 check becomes WINGDB check. * config/arm/arm.mt (TDEPFILES): Add remote-rdp.o * config/arm/tm-arm.h (TARGET_BYTE_ORDER): becomes TARGET_BYTE_ORDER_SELECTABLE. (ADDR_BITS_REMOVE): New. (ORIGINAL_REGISTER_NAMES, ADDITIONAL_REGISTER_NAMES): New. (INST_xx): New (FRAME_FIND_SAVED_REGS): Pass the right argument. (arm_get_next_pc): Declare. * mswin/prebuilt/*/bfdtarget.h (SELECT_ARCHITECTURES): Need leading &.
1995-09-29 00:14:01 +00:00
remote-rdp.o: remote-rdp.c $(wait_h) $(defs_h) $(gdbcore_h) \
$(inferior_h) gdb_string.h
Thu Sep 28 14:32:11 1995 steve chamberlain <sac@slash.cygnus.com> * callback.[ch]: New files. * remote-rdp.c: Support for the ARM RDP monitor. * Makefile: Update. * arm-tdep.c (arm_othernames): New. (_initialize_arm_tdep): install 'othernames' command. (arm_nullified_insn, shifted_reg_val, arm_get_next_pc): New. * configure.in: Check for termios.h, termio.h and sgtty.h. (i[345]86-*-win32*): New host. * configure: Regenerated. * inflow.c: Clean up inclusions. * main.c (main): Check for WINGDB, not WIN32. * printcmd.c (do_examine): Put QUIT test in loop. * remote-hms.c (e7000_load): Delete. (hms_ops): Point to generic_load instead. * remote-hms.c (hms_ops): Point to generic_load. * remote-sim.c (sim_callback_write_stdout): Becomes gdbsim_write_stdout. (gdbsim_load): Call generic_load. * remote-utils.c (gr_load_image): Delete. * ser-unix.c (terminal.h): Include instead of havig own #if tree. (hardwire_flush_input): Reset input buffer too. * source.c (openp): If WIN32 then open file in binary mode. * terminal.h: Configure IO mechanism using autoconf defines if available and not overriden. * utils.c (quit, pollquit, notice_quit): WIN32 check becomes WINGDB check. * config/arm/arm.mt (TDEPFILES): Add remote-rdp.o * config/arm/tm-arm.h (TARGET_BYTE_ORDER): becomes TARGET_BYTE_ORDER_SELECTABLE. (ADDR_BITS_REMOVE): New. (ORIGINAL_REGISTER_NAMES, ADDITIONAL_REGISTER_NAMES): New. (INST_xx): New (FRAME_FIND_SAVED_REGS): Pass the right argument. (arm_get_next_pc): Declare. * mswin/prebuilt/*/bfdtarget.h (SELECT_ARCHITECTURES): Need leading &.
1995-09-29 00:14:01 +00:00
1993-08-27 02:37:22 +00:00
remote-bug.o: remote-bug.c $(wait_h) $(defs_h) $(gdbcore_h) \
$(inferior_h) target.h terminal.h $(remote_utils_h) gdb_string.h
1993-08-27 02:37:22 +00:00
remote-e7000.o: remote-e7000.c $(defs_h) $(gdbcore_h) target.h \
$(wait_h) serial.h gdb_string.h
1993-06-23 22:59:35 +00:00
remote-eb.o: remote-eb.c $(wait_h) $(srcdir)/config/a29k/tm-a29k.h \
$(defs_h) $(gdbcore_h) $(inferior_h) symfile.h target.h terminal.h \
gdb_string.h
1993-06-23 22:59:35 +00:00
remote-es.o: remote-es.c $(bfd_h) $(wait_h) $(command_h) $(defs_h) \
$(inferior_h) $(remote_utils_h) terminal.h gdb_string.h
1993-06-23 22:59:35 +00:00
remote-hms.o: remote-hms.c $(wait_h) $(defs_h) $(gdbcore_h) \
$(inferior_h) serial.h target.h terminal.h gdb_string.h
1993-06-23 22:59:35 +00:00
remote-mips.o: remote-mips.c $(wait_h) $(defs_h) $(gdbcmd_h) \
$(gdbcore_h) $(inferior_h) serial.h symfile.h target.h
remote-mm.o: remote-mm.c $(bfd_h) $(wait_h) $(defs_h) $(inferior_h) \
minimon.h target.h terminal.h gdb_string.h
1993-06-23 22:59:35 +00:00
remote-nindy.o: remote-nindy.c $(floatformat_h) $(wait_h) $(command_h) \
$(defs_h) $(gdbcore_h) $(inferior_h) \
1993-09-14 20:08:23 +00:00
nindy-share/env.h nindy-share/stop.h $(remote_utils_h) \
symfile.h
1993-06-23 22:59:35 +00:00
remote-os9k.o: remote-os9k.c $(defs_h) $(gdbcore_h) $(wait_h) \
$(command_h) monitor.h $(remote_utils_h) $(symtab_h) symfile.h \
objfiles.h gdb-stabs.h gdb_string.h
1993-06-23 22:59:35 +00:00
remote-sim.o: remote-sim.c $(wait_h) $(defs_h) $(gdbcore_h) \
$(inferior_h) target.h terminal.h gdb_string.h
1993-06-23 22:59:35 +00:00
remote-st.o: remote-st.c $(wait_h) $(defs_h) $(gdbcore_h) serial.h \
target.h gdb_string.h
1993-06-23 22:59:35 +00:00
remote-udi.o: remote-udi.c $(bfd_h) $(wait_h) $(defs_h) $(gdbcmd_h) \
$(inferior_h) target.h terminal.h $(udiheaders) gdb_string.h
1993-06-23 22:59:35 +00:00
remote-vx.o: remote-vx.c $(wait_h) complaints.h $(defs_h) $(gdbcmd_h) \
$(gdbcore_h) $(inferior_h) target.h vx-share/dbgRpcLib.h \
vx-share/ptrace.h vx-share/xdr_ld.h vx-share/xdr_ptrace.h \
vx-share/xdr_rdb.h gdb-stabs.h objfiles.h symfile.h $(bfd_h) \
gdb_string.h
1993-06-23 22:59:35 +00:00
remote-vx29k.o: remote-vx29k.c $(wait_h) complaints.h $(defs_h) $(gdbcmd_h) \
$(gdbcore_h) $(inferior_h) target.h vx-share/dbgRpcLib.h \
vx-share/ptrace.h vx-share/xdr_ld.h vx-share/xdr_ptrace.h \
vx-share/xdr_rdb.h gdb_string.h
* Makefile.in: Add mswin to SUBDIRS. Add rules for mswin/libwingdb.a and remote-wiggler.o. * breakpoint.c (breakpoint_here_p): Clean up bp enabled test. * (breakpoint_inserted_here_p): New func, just like breakpoint_here_p, except it's honest. Honestly. * breakpoint.h: Proto for above. start-sanitize-gdbtk * configure configure.in: Add host *windows* to list of hosts that don't support GDBtk. end-sanitize-gdbtk * configure configure.in: Add mswin to configdirs if host is i[3456]86-*-windows. * core-aout.c (fetch_core_registers register_addr) gdbcore.h: Change all vars that can contain addresses to type CORE_ADDR. * findvar.c (supply_register): Allow val to be NULL. This means that regno is unsupported. * (read_pc read_pc_pid write_pc write_pc_pid): Make non-pid forms just call pid forms with inferior_pid so that there's only once place to hack PC's and such. * infrun.c (proceed): Don't skip breakpoints if user changed PC. * remote-wiggler.c: New file. Support for BDM interface from Macraigor Systems. * serial.c: Enhance serial logging capability. Add hex and octal output modes (set remotelogbase {hex|octal|ascii}. Also log breaks, timeouts, errors, and eofs. * serial.h: Redefine SERIAL_SEND_BREAK to go through a wrapper function so that we can log breaks. Don't export serial_logfile or serial_logfp. * top.c (execute_command): Don't test for serial_logfp here. Just call serial_log_comand, and let serial.c sort it out. * valops.c (value_of_variable): Don't attempt to establish frames for static and global variables. This makes things work a bit better if the stack or frame pointer is trashed. * config/m68k/monitor.mt (TDEPFILES): Add remote-wiggler.o. * config/m68k/tm-m68k.h: Define STACK_ALIGN. CPU32 can't hack misaligned stacks during function calls.
1996-09-05 01:01:05 +00:00
remote-wiggler.o: remote-wiggler.c $(wait_h) complaints.h $(defs_h) \
$(gdbcmd_h) $(gdbcore_h) $(inferior_h) target.h
1993-09-14 20:08:23 +00:00
remote-utils.o: remote-utils.c $(defs_h) $(gdbcmd_h) $(gdbcore_h) \
$(inferior_h) $(remote_utils_h) gdb_string.h
1993-09-14 20:08:23 +00:00
1993-06-23 22:59:35 +00:00
remote.o: remote.c $(bfd_h) $(wait_h) $(defs_h) $(gdbcmd_h) \
$(inferior_h) $(remote_utils_h) symfile.h terminal.h gdb_string.h
1993-06-23 22:59:35 +00:00
remote-nrom.o: remote-nrom.c $(bfd_h) $(wait_h) $(defs_h) $(gdbcmd_h) \
$(inferior_h) $(remote_utils_h) symfile.h terminal.h
rom68k-rom.o: rom68k-rom.c monitor.h $(bfd_h) $(wait_h) $(defs_h) $(gdbcmd_h) \
$(inferior_h) target.h serial.h terminal.h
rs6000-nat.o: rs6000-nat.c $(bfd_h) $(defs_h) $(inferior_h) target.h \
xcoffsolib.h
1993-06-23 22:59:35 +00:00
rs6000-tdep.o: rs6000-tdep.c $(defs_h) $(gdbcore_h) $(inferior_h) \
target.h xcoffsolib.h
scm-exp.o: $(defs_h) $(value_h) parser-defs.h language.h c-lang.h \
scm-lang.h scm-tags.h
scm-lang.o: $(defs_h) $(value_h) parser-defs.h language.h c-lang.h \
scm-lang.h scm-tags.h gdb_string.h $(gdbcore_h)
scm-valprint.o: $(defs_h) $(value_h) parser-defs.h language.h \
scm-lang.h valprint.h $(gdbcore_h)
1993-06-23 22:59:35 +00:00
ser-go32.o: ser-go32.c $(defs_h) serial.h
ser-mac.o: ser-mac.c $(defs_h) serial.h signals.h
* core-aout.c (fetch_core_registers): Cast core_reg_size to int before testing against reg_ptr. * eval.c (evaluate_subexp_standard): Cast type of TYPE_FN_FIELD_VOFFSET to int. * findvar.c (extract_signed_integer, extract_unsigned_integer, extract_long_unsigned_integer): Cast type of sizeof to int. * values.c (unpack_field_as_long, modify_field): Ditto. * valops.c (value_assign, call_function_by_hand): Ditto. * infcmd.c (do_registers_info): Ditto. * ser-tcp.c (tcp_open): Ditto * remote.c (putpkt): Ditto. * dcache.c (dcache_peek): Ditto. * dcache.c (dcache_poke): Ditto. * m2-exp.y (yylex): Ditto. * gnu-regex.c (re_match_2): Ditto. * f-lang.c (ADD_BF_SYMNUM, saved_bf_list_end, tmp_bf_ptr): Ifdef out unused macro definition and variables. * inftarg.c (proc_wait): Move from main.c to here, and make static. * valprint.c (val_print_string): Change bufsize from int to unsigned. * main.c (wait.h): Include * top.c (command_line_input): Remove unused variable "c". * f-typeprint.c (f_type_print_varspec_prefix): Add missing enum value TYPE_CODE_TYPEDEF to switch statement. (f_type_print_varspec_suffix): Add missing enum value TYPE_CODE_TYPEDEF to switch statement. * ch-exp.c (parse_primval): Add remaining enumeration values to switch statement, with no specific action. (ch_lex): Add LOC_UNRESOLVED in switch statement. (pushback_token): Ifdef out, since code using it is ifdef'd out. * stabsread.c (cleanup_undefined_types): Remove unused label "badtype". * objfiles.h (print_symbol_bcache_statistics): Add prototype. * maint.c (objfiles.h): Include. (maintenance_print_statistics): Remove unused variable "temp". * minsyms.c (lookup_minimal_symbol_solib_trampoline): Remove unused variable "found_file_symbol". * m2-exp.y (yylex): Add LOC_UNRESOLVED case to switch. * language.c (lang_bool_type): Use existing function local type variable rather than create block local variables. * solib.c (disable_break): Enclose in ifndef SVR4_SHARED_LIBS. * infptrace.c (wait.h, command.h): Include. * ser-tcp.c (gdb_string.h): Include * i386-tdep.c (codestream_seek): Change "place" to CORE_ADDR. (i386_get_frame_setup): Change "pc" from int to CORE_ADDR. * command.c (complete_on_enum): Make assignment used as truth value explictly check against NULL. (wait.h): Include. * infrun.c (wait_for_inferior): Ifdef out prologue_pc since code that uses it is ifdef'd out. * parser-defs.h: Add prototype for write_dollar_variable. * infrun.c: Add prototype for write_pc_pid. * breakpoint.h: Add prototype for re_enable_breakpoints_in_shlibs. * symmisc.c (bcache.h): Include. * bcache.h: Add prototype for print_bcache_statistics. * symfile.c: Include <time.h>. * printcmd.c (print_scalar_formatted): Change len to unsigned int. * valarith.c (value_equal): Cast result of TYPE_LENGTH to int. * valarith.c (value_binop): Change result_len, promoted_len1, and promoted_len2 to unsigned int. * valarith.c (value_subscripted_rvalue): Change elt_offs and elt_size to unsigned int. * valops.c (value_array): Change typelength to unsigned int. (destructor_name_p): Change len to unsigned int. * scm-lang.h (scm_parse): Add prototype for scm_unpack. * symfile.c (decrement_reading_symtab): Change return type to void. * valarith.c (value_subscript): Remove unused variable "word". (value_subscript): Remove unused variable "tint". * valops.c (auto_abandon): Ifdef out, since code using it is also ifdef'd out. * eval.c (init_array_element): Remove unused variable "val". * Makefile.in (values.o): Depends on scm-lang.h. (command.o): Depends upon wait_h. (ser-tcp.o): Depends upon gdb_string.h. (infptrace.o): Depends upon wait_h and command_h. (maint.o): Depends on objfiles.h and symfile.h. * values.c (allocate_repeat_value): Remove unused variable "element_type". (scm-lang.h): Include. * breakpoint.c (create_longjmp_breakpoint): Enclose in GET_LONGJMP_TARGET define, unused otherwise. * config/i386/nm-linux.h: Add prototypes for i386_insert_watchpoint, i386_remove_watchpoint and i386_stopped_by_watchpoint.
1996-03-30 05:45:10 +00:00
ser-tcp.o: ser-tcp.c $(defs_h) serial.h signals.h gdb_string.h
1993-06-23 22:59:35 +00:00
ser-unix.o: ser-unix.c $(defs_h) serial.h
serial.o: serial.c $(defs_h) serial.h gdb_string.h
1993-06-23 22:59:35 +00:00
sh-tdep.o: sh-tdep.c $(bfd_h) $(dis-asm_h) \
$(srcdir)/../opcodes/sh-opc.h $(defs_h) $(expression_h) $(frame_h) \
$(gdbcmd_h) $(gdbtypes_h) $(symtab_h) $(value_h)
sh3-rom.o: sh3-rom.c monitor.h $(bfd_h) $(wait_h) $(defs_h) $(gdbcmd_h) \
$(inferior_h) target.h serial.h terminal.h
mon960-rom.o: mon960-rom.c monitor.h $(bfd_h) $(wait_h) $(defs_h) $(gdbcmd_h) \
$(inferior_h) target.h serial.h terminal.h
1993-06-23 22:59:35 +00:00
solib.o: solib.c $(command_h) $(defs_h) $(gdbcore_h) $(inferior_h) \
objfiles.h gnu-regex.h symfile.h target.h gdb_string.h
1993-06-23 22:59:35 +00:00
source.o: source.c $(defs_h) $(expression_h) $(frame_h) $(gdbcmd_h) \
$(gdbcore_h) language.h objfiles.h gnu-regex.h symfile.h $(symtab_h) \
gdb_string.h
1993-06-23 22:59:35 +00:00
sparc-nat.o: sparc-nat.c $(bfd_h) $(defs_h) $(inferior_h) $(gdbcore_h) \
target.h
1993-06-23 22:59:35 +00:00
sparc-tdep.o: sparc-tdep.c $(floatformat_h) $(defs_h) $(gdbcore_h) \
$(inferior_h) objfiles.h symfile.h target.h gdb_string.h
1993-06-23 22:59:35 +00:00
sparcl-tdep.o: sparcl-tdep.c $(defs_h) $(gdbcore_h) target.h
dsrec.o: dsrec.c $(defs_h) srec.h
1993-06-23 22:59:35 +00:00
stabsread.o: stabsread.c $(bfd_h) $(INCLUDE_DIR)/aout/stab.def \
$(INCLUDE_DIR)/aout/stab_gnu.h buildsym.h complaints.h $(defs_h) \
$(gdbtypes_h) objfiles.h stabsread.h symfile.h $(symtab_h) \
gdb_string.h
1993-06-23 22:59:35 +00:00
stack.o: stack.c $(defs_h) $(gdbcmd_h) $(gdbcore_h) $(inferior_h) \
language.h target.h gdb_string.h
1993-06-23 22:59:35 +00:00
sun3-nat.o: sun3-nat.c $(defs_h) $(gdbcore_h) $(inferior_h)
sun386-nat.o: sun386-nat.c $(defs_h) $(inferior_h) $(gdbcore_h)
symfile.o: symfile.c $(breakpoint_h) complaints.h $(defs_h) \
$(expression_h) $(gdbcmd_h) $(gdbcore_h) $(gdbtypes_h) \
language.h objfiles.h symfile.h $(symtab_h) target.h \
gdb_string.h
1993-06-23 22:59:35 +00:00
symm-tdep.o: symm-tdep.c $(defs_h) $(gdbcore_h) $(inferior_h)
symm-nat.o: symm-nat.c $(defs_h) $(gdbcore_h) $(inferior_h)
1993-06-24 23:16:00 +00:00
1993-06-23 22:59:35 +00:00
symmisc.o: symmisc.c $(bfd_h) $(breakpoint_h) $(command_h) $(defs_h) \
$(expression_h) $(gdbtypes_h) language.h objfiles.h symfile.h \
$(symtab_h) gdb_string.h
1993-06-23 22:59:35 +00:00
symtab.o: symtab.c call-cmds.h $(defs_h) $(expression_h) $(frame_h) \
$(gdbcmd_h) $(gdbcore_h) $(gdbtypes_h) language.h objfiles.h \
gnu-regex.h symfile.h $(symtab_h) target.h $(value_h) \
gdb_string.h
1993-06-23 22:59:35 +00:00
tahoe-tdep.o: tahoe-tdep.c $(OP_INCLUDE)/tahoe.h $(defs_h) \
1993-06-23 22:59:35 +00:00
$(symtab_h)
#start-sanitize-tic80
tic80-tdep.o: tic80-tdep.c $(defs_h)
#end-sanitize-tic80
1993-06-23 22:59:35 +00:00
target.o: target.c $(bfd_h) $(defs_h) $(gdbcmd_h) $(inferior_h) \
objfiles.h symfile.h target.h gdb_string.h
1993-06-23 22:59:35 +00:00
thread.o: thread.c $(defs_h) gdbthread.h $(gdbcmd_h)
Sun Aug 1 22:58:18 1993 Stu Grossman (grossman at cygnus.com) * Makefile.in (CLIBS): Reorder to make Lynx ld happy. * (HFILES): New file thread.h. * (OBS): New file thread.c. * configure.in: Host config for Lynx/386. * fork-child.c (fork_inferior): Call init_thread_list(). * infrun.c (resume): Add pid to invocation of target_resume(). * (wait_for_inferior): Pay attention to pid from target_wait(). Multi-threading code now uses this to determine what to do. * inftarg.c (child_wait): Conditionalize based on CHILD_WAIT macro. Use target_pid_to_str() macro throughout when printing pid. * inferior.h (child_resume): Add pid to prototype. * hppab-nat.c hppah-nat.c infptrace.c (child_resume): Pass in pid as argument, instead of using inferior_pid. * procfs.c (procfs_resume): Pass in pid as argument. Ignored for now. Use target_pid_to_str() macro throughout for printing process id. * remote-adapt.c (adapt_resume): Pass in pid as argument. * remote-eb.c (eb_resume): Pass in pid as argument. * remote-es.c (es1800_resume): Pass in pid as argument. * remote-hms.c (hms_resume): Pass in pid as argument. * remote-mips.c (mips_resume): Pass in pid as argument. * remote-mm.c (mm_resume): Pass in pid as argument. * remote-monitor.c (monitor_resume): Pass in pid as argument. * remote-nindy.c (nindy_resume): Pass in pid as argument. * remote-sa.sparc.c (remote_resume): Pass in pid as argument. * remote-sim.c (rem_resume): Pass in pid as argument. * remote-sp64sim.c (simif_resume): Pass in pid as argument. * remote-st.c (st2000_resume): Pass in pid as argument. * remote-udi.c (udi_resume): Pass in pid as argument. * remote-vx.c (vx_resume): Pass in pid as argument. * remote-z8k.c (rem_resume): Pass in pid as argument. * remote.c (remote_resume): Pass in pid as argument. * solib.c (solid_create_inferior_hook): Pass inferior_pid to target_resume(). * target.c (normal_pid_to_str): New routine to print out process ID normally. * target.h (struct target_ops): Add pid to prototype at to_resume(). (target_resume): Add pid argument. * (target_pid_to_str): Default definition for normal type pids. * thread.c, thread.c: New modules for multi thread/process control.
1993-08-02 06:25:36 +00:00
top.o: top.c top.h $(bfd_h) $(getopt_h) $(readline_headers) call-cmds.h \
$(defs_h) $(gdbcmd_h) $(inferior_h) language.h signals.h \
$(remote_utils_h) gdb_string.h
1993-06-23 22:59:35 +00:00
typeprint.o: typeprint.c $(defs_h) $(expression_h) $(gdbcmd_h) \
$(gdbcore_h) $(gdbtypes_h) language.h $(symtab_h) target.h \
$(value_h) gdb_string.h
1993-06-23 22:59:35 +00:00
ultra3-nat.o: ultra3-nat.c $(defs_h) $(gdbcore_h) $(inferior_h)
ultra3-xdep.o: ultra3-xdep.c $(defs_h) $(gdbcore_h) $(inferior_h)
umax-xdep.o: umax-xdep.c $(defs_h) $(gdbcore_h) $(inferior_h)
1993-06-23 22:59:35 +00:00
utils.o: utils.c $(bfd_h) $(defs_h) $(expression_h) $(gdbcmd_h) \
language.h signals.h target.h terminal.h $(readline_headers) \
gdb_string.h
1993-06-23 22:59:35 +00:00
valarith.o: valarith.c $(bfd_h) $(defs_h) $(expression_h) \
$(gdbtypes_h) language.h $(symtab_h) target.h $(value_h) \
gdb_string.h
1993-06-24 23:16:00 +00:00
valops.o: valops.c $(defs_h) $(gdbcore_h) $(inferior_h) target.h \
gdb_string.h
1993-06-24 23:16:00 +00:00
1993-06-23 22:59:35 +00:00
valprint.o: valprint.c $(defs_h) $(expression_h) $(gdbcmd_h) \
$(gdbcore_h) $(gdbtypes_h) language.h $(symtab_h) target.h \
$(value_h) gdb_string.h valprint.h
1993-06-23 22:59:35 +00:00
values.o: values.c $(defs_h) $(expression_h) $(frame_h) $(gdbcmd_h) \
$(gdbcore_h) $(gdbtypes_h) $(symtab_h) target.h $(value_h) \
* core-aout.c (fetch_core_registers): Cast core_reg_size to int before testing against reg_ptr. * eval.c (evaluate_subexp_standard): Cast type of TYPE_FN_FIELD_VOFFSET to int. * findvar.c (extract_signed_integer, extract_unsigned_integer, extract_long_unsigned_integer): Cast type of sizeof to int. * values.c (unpack_field_as_long, modify_field): Ditto. * valops.c (value_assign, call_function_by_hand): Ditto. * infcmd.c (do_registers_info): Ditto. * ser-tcp.c (tcp_open): Ditto * remote.c (putpkt): Ditto. * dcache.c (dcache_peek): Ditto. * dcache.c (dcache_poke): Ditto. * m2-exp.y (yylex): Ditto. * gnu-regex.c (re_match_2): Ditto. * f-lang.c (ADD_BF_SYMNUM, saved_bf_list_end, tmp_bf_ptr): Ifdef out unused macro definition and variables. * inftarg.c (proc_wait): Move from main.c to here, and make static. * valprint.c (val_print_string): Change bufsize from int to unsigned. * main.c (wait.h): Include * top.c (command_line_input): Remove unused variable "c". * f-typeprint.c (f_type_print_varspec_prefix): Add missing enum value TYPE_CODE_TYPEDEF to switch statement. (f_type_print_varspec_suffix): Add missing enum value TYPE_CODE_TYPEDEF to switch statement. * ch-exp.c (parse_primval): Add remaining enumeration values to switch statement, with no specific action. (ch_lex): Add LOC_UNRESOLVED in switch statement. (pushback_token): Ifdef out, since code using it is ifdef'd out. * stabsread.c (cleanup_undefined_types): Remove unused label "badtype". * objfiles.h (print_symbol_bcache_statistics): Add prototype. * maint.c (objfiles.h): Include. (maintenance_print_statistics): Remove unused variable "temp". * minsyms.c (lookup_minimal_symbol_solib_trampoline): Remove unused variable "found_file_symbol". * m2-exp.y (yylex): Add LOC_UNRESOLVED case to switch. * language.c (lang_bool_type): Use existing function local type variable rather than create block local variables. * solib.c (disable_break): Enclose in ifndef SVR4_SHARED_LIBS. * infptrace.c (wait.h, command.h): Include. * ser-tcp.c (gdb_string.h): Include * i386-tdep.c (codestream_seek): Change "place" to CORE_ADDR. (i386_get_frame_setup): Change "pc" from int to CORE_ADDR. * command.c (complete_on_enum): Make assignment used as truth value explictly check against NULL. (wait.h): Include. * infrun.c (wait_for_inferior): Ifdef out prologue_pc since code that uses it is ifdef'd out. * parser-defs.h: Add prototype for write_dollar_variable. * infrun.c: Add prototype for write_pc_pid. * breakpoint.h: Add prototype for re_enable_breakpoints_in_shlibs. * symmisc.c (bcache.h): Include. * bcache.h: Add prototype for print_bcache_statistics. * symfile.c: Include <time.h>. * printcmd.c (print_scalar_formatted): Change len to unsigned int. * valarith.c (value_equal): Cast result of TYPE_LENGTH to int. * valarith.c (value_binop): Change result_len, promoted_len1, and promoted_len2 to unsigned int. * valarith.c (value_subscripted_rvalue): Change elt_offs and elt_size to unsigned int. * valops.c (value_array): Change typelength to unsigned int. (destructor_name_p): Change len to unsigned int. * scm-lang.h (scm_parse): Add prototype for scm_unpack. * symfile.c (decrement_reading_symtab): Change return type to void. * valarith.c (value_subscript): Remove unused variable "word". (value_subscript): Remove unused variable "tint". * valops.c (auto_abandon): Ifdef out, since code using it is also ifdef'd out. * eval.c (init_array_element): Remove unused variable "val". * Makefile.in (values.o): Depends on scm-lang.h. (command.o): Depends upon wait_h. (ser-tcp.o): Depends upon gdb_string.h. (infptrace.o): Depends upon wait_h and command_h. (maint.o): Depends on objfiles.h and symfile.h. * values.c (allocate_repeat_value): Remove unused variable "element_type". (scm-lang.h): Include. * breakpoint.c (create_longjmp_breakpoint): Enclose in GET_LONGJMP_TARGET define, unused otherwise. * config/i386/nm-linux.h: Add prototypes for i386_insert_watchpoint, i386_remove_watchpoint and i386_stopped_by_watchpoint.
1996-03-30 05:45:10 +00:00
gdb_string.h scm-lang.h
1993-06-23 22:59:35 +00:00
vax-tdep.o: vax-tdep.c $(OP_INCLUDE)/vax.h $(defs_h) $(symtab_h)
1993-06-23 22:59:35 +00:00
w65-tdep.o : w65-tdep.c $(gdbcore_h)
win32-nat.o: win32-nat.c $(gdbcmd_h) $(gdbcore_h) $(inferior_h) $(defs_h) \
gdb_string.h
1993-06-23 22:59:35 +00:00
xdr_ld.o: vx-share/xdr_ld.c $(defs_h) vx-share/vxTypes.h \
vx-share/vxWorks.h vx-share/xdr_ld.h
$(CC) -c $(INTERNAL_CFLAGS) $(srcdir)/vx-share/xdr_ld.c
xdr_ptrace.o: vx-share/xdr_ptrace.c $(defs_h) vx-share/vxTypes.h \
vx-share/vxWorks.h vx-share/xdr_ptrace.h
$(CC) -c $(INTERNAL_CFLAGS) $(srcdir)/vx-share/xdr_ptrace.c
xdr_rdb.o: vx-share/xdr_rdb.c $(defs_h) vx-share/vxTypes.h \
vx-share/vxWorks.h vx-share/xdr_rdb.h
$(CC) -c $(INTERNAL_CFLAGS) $(srcdir)/vx-share/xdr_rdb.c
xcoffread.o: xcoffread.c $(bfd_h) $(INCLUDE_DIR)/aout/stab.def \
$(INCLUDE_DIR)/aout/stab_gnu.h $(INCLUDE_DIR)/coff/internal.h \
$(INCLUDE_DIR)/coff/rs6000.h $(BFD_SRC)/libcoff.h buildsym.h \
complaints.h $(defs_h) $(gdbtypes_h) objfiles.h stabsread.h symfile.h \
$(symtab_h) partial-stab.h gdb_string.h
1993-06-23 22:59:35 +00:00
xcoffsolib.o: xcoffsolib.c $(bfd_h) $(defs_h) xcoffsolib.h
z8k-tdep.o: z8k-tdep.c $(bfd_h) $(dis-asm_h) $(defs_h) $(frame_h) \
$(gdbcmd_h) $(gdbtypes_h) $(symtab_h) $(gdbcore_h)
1993-06-23 22:59:35 +00:00
c-exp.tab.o: c-exp.tab.c c-lang.h $(defs_h) $(expression_h) \
$(gdbtypes_h) language.h parser-defs.h $(symtab_h) $(value_h) \
$(bfd_h) objfiles.h symfile.h
1993-06-23 22:59:35 +00:00
java-exp.tab.o: java-exp.tab.c java-lang.h $(defs_h) $(expression_h) \
$(gdbtypes_h) language.h parser-defs.h $(symtab_h) $(value_h) \
$(bfd_h) objfiles.h symfile.h
f-exp.tab.o: f-exp.tab.c f-lang.h $(defs_h) $(expression_h) \
language.h parser-defs.h $(value_h) $(bfd_h) objfiles.h symfile.h
1993-06-23 22:59:35 +00:00
m2-exp.tab.o: m2-exp.tab.c $(defs_h) $(expression_h) $(gdbtypes_h) \
language.h m2-lang.h parser-defs.h $(symtab_h) $(value_h) \
$(bfd_h) objfiles.h symfile.h
1993-06-23 22:59:35 +00:00
### end of the gdb Makefile.in.