old-cross-binutils/gdb/Makefile.in

1589 lines
56 KiB
Makefile
Raw Normal View History

# Copyright 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996
* README: Add note about SPARCworks cc release 3.0 and higher. Add procfs support for Alpha OSF/1-2.x. * config/alpha/nm-osf.h: Renamed from nm-alpha.h, generic OSF/1 native support. * config/alpha/alpha-osf1.mh (NAT_FILE): Changed accordingly. (MUNCH_DEFINE): Removed. * config/alpha/alpha-osf2.mh, config/alpha/nm-osf2.h: New files for procfs support. * configure.in (alpha-dec-osf*): Use alpha-osf2.mh for OSF/1 release 2.x and higher, else alpha-osf1.mh, as the procfs support in release 1.x is incomplete. * Makefile.in (ALLCONFIG): Add config/alpha/alpha-osf2.mh. * alpha-nat.c (supply_gregset, fill_gregset, supply_fpgregset, fill_fpgregset): New routines for procfs support. * inftarg.c (_initialize_inftarg): Don't add ptrace support if we have an optional procfs and /proc is accessible. * procfs.c: Include sys/fault.h and sys/syscall.h before including sys/procfs.h. (unconditionally_kill_inferior): If PROCFS_NEED_PIOCSSIG_FOR_KILL is defined, additionally perform a PIOCSSIG to really terminate the inferior. (create_procinfo): Always return a result. (create_procinfo, do_attach): Don't trace T_IFAULT faults if PROCFS_DONT_TRACE_IFAULT is defined. (procfs_init_inferior): Use START_INFERIOR_TRAPS_EXPECTED as argument to startup_inferior if it is defined. (proc_set_exec_trap): If PIOCSSPCACT is defined, use it instead of tracing exits from exec system calls. Needed for the user level loader under Alpha OSF/1. (do_detach): Clear any pending signal if we want to detach from a process without a signal. (set_proc_siginfo): If PROCFS_DONT_PIOCSSIG_CURSIG is defined, don't issue a PIOCSSIG if pr_cursig already contains the signal we intend to set. (info_proc_signals): If PROCFS_SIGPEND_OFFSET is defined, the pending signals are numbered from 1 instead of 0. (info_proc_mappings): Increase size of output format for addresses if BFD_HOST_64_BIT is defined. (procfs_stop): Renamed from child_stop. (_initialize_procfs): Don't add procfs support if we have an optional procfs and /proc is not accessible.
1995-01-12 18:12:04 +00:00
# Free Software Foundation, Inc.
# This file is part of GDB.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
prefix = @prefix@
exec_prefix = @exec_prefix@
host_alias = @host_alias@
target_alias = @target_alias@
program_transform_name = @program_transform_name@
bindir = @bindir@
libdir = @libdir@
tooldir = $(libdir)/$(target_alias)
1992-03-14 02:30:18 +00:00
datadir = @datadir@
mandir = @mandir@
man1dir = $(mandir)/man1
man2dir = $(mandir)/man2
man3dir = $(mandir)/man3
man4dir = $(mandir)/man4
man5dir = $(mandir)/man5
man6dir = $(mandir)/man6
man7dir = $(mandir)/man7
man8dir = $(mandir)/man8
man9dir = $(mandir)/man9
infodir = @infodir@
includedir = @includedir@
SHELL = /bin/sh
INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_DATA = @INSTALL_DATA@
AR = @AR@
AR_FLAGS = qv
RANLIB = @RANLIB@
AWK = @AWK@
# Flags that describe where you can find the termcap library.
# This can be overridden in the host Makefile fragment file.
TERMCAP = -ltermcap
1993-06-23 22:59:35 +00:00
# If you are compiling with GCC, make sure that either 1) You have the
# fixed include files where GCC can reach them, or 2) You use the
# -traditional flag. Otherwise the ioctl calls in inflow.c
# will be incorrectly compiled. The "fixincludes" script in the gcc
# distribution will fix your include files up.
CC=@CC@
# Directory containing source files.
srcdir = @srcdir@
VPATH = @srcdir@
YACC=@YACC@
# where to find makeinfo, preferably one designed for texinfo-2
MAKEINFO=makeinfo
# Set this up with gcc if you have gnu ld and the loader will print out
1993-06-23 22:59:35 +00:00
# line numbers for undefined references.
#CC_LD=gcc -static
CC_LD=$(CC)
1993-06-23 22:59:35 +00:00
# Where is our "include" directory? Typically $(srcdir)/../include.
# This is essentially the header file directory for the library
# routines in libiberty.
INCLUDE_DIR = $(srcdir)/../include
INCLUDE_CFLAGS = -I$(INCLUDE_DIR)
# Where is the "-liberty" library? Typically in ../libiberty.
1993-06-23 22:59:35 +00:00
LIBIBERTY = ../libiberty/libiberty.a
# Where is the MMALLOC library? Typically in ../mmalloc.
# Note that mmalloc can still be used on systems without mmap().
* Makefile.in (MMALLOC_CFLAGS): Eliminate intermediate MMALLOC_DISABLE and MMALLOC_CHECK macros, and add comment indicating how host dependent makefile fragment should modify MMALLOC_CFLAGS to not use mmalloc, or to use it but to not do heap corruption checking. * gdbserver/Makefile.in: Ditto. * utils.c (init_malloc): Replace warning() use with direct call of fprintf_unfiltered, since current_target has not yet been set and thus we cannot use warning(). If we try to use mmcheck and it fails, suggest that this configuration needs NO_MMCHECK or MMCHECK_FORCE defined. Other small mmalloc related cleanups. * config/sparc/sun4os4.mh (MMALLOC_CFLAGS): Define MMCHECK_FORCE to 1. * config/alpha/alpha-osf2.mh (MMALLOC_CFLAGS): Set to -DNO_MMCHECK. * config/sparc/xm-sun4os4.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT): * config/i386/xm-i386v4.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT): * config/i386/xm-linux.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT): * config/m68k/xm-hp300hpux.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT): * config/m68k/xm-m68kv4.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT); * config/m68k/xm-sun3os4.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT): * config/pa/xm-hppah.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT): * config/sparc/xm-sun4sol2.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT): Remove obsolete defines. * config/alpha/alpha-linux.mh (MMALLOC_DISABLE): * config/alpha/alpha-osf1.mh (MMALLOC_DISABLE): * config/rs6000/rs6000.mh (MMALLOC_DISABLE): * config/rs6000/aix4.mh (MMALLOC_DISABLE): * config/powerpc/aix4.mh (MMALLOC_DISABLE): * config/powerpc/aix.mh (MMALLOC_DISABLE): * config/ns32k/ns32km3.mh (MMALLOC_DISABLE): * config/mips/mipsm3.mh (MMALLOC_DISABLE): * config/mips/decstation.mh (MMALLOC_DISABLE): * config/m88k/cxux.mh (MMALLOC_DISABLE): * config/i386/i386mk.mh (MMALLOC_DISABLE): * config/i386/i386m3.mh (MMALLOC_DISABLE): * config/i386/i386gnu.mh (MMALLOC_DISABLE): Use MMALLOC_CFLAGS instead.
1996-07-11 07:41:51 +00:00
# To use your system malloc, in the host makefile fragment set MMALLOC_CFLAGS
# to -DNO_MMALLOC and set MMALLOC to empty.
# To use mmalloc but not use heap checking, in the host makefile fragment set
# MMALLOC_CFLAGS to the value below but add -DNO_MMCHECK.
# To use mmalloc and heap checking on a system where the C runtime allocates
# memory that is never freed, in the host makefile fragment set MMALLOC_CFLAGS
# to the value below and add -DFORCE_MMCHECK=1
MMALLOC_DIR = ../mmalloc
MMALLOC_SRC = $(srcdir)/$(MMALLOC_DIR)
MMALLOC = $(MMALLOC_DIR)/libmmalloc.a
* Makefile.in (MMALLOC_CFLAGS): Eliminate intermediate MMALLOC_DISABLE and MMALLOC_CHECK macros, and add comment indicating how host dependent makefile fragment should modify MMALLOC_CFLAGS to not use mmalloc, or to use it but to not do heap corruption checking. * gdbserver/Makefile.in: Ditto. * utils.c (init_malloc): Replace warning() use with direct call of fprintf_unfiltered, since current_target has not yet been set and thus we cannot use warning(). If we try to use mmcheck and it fails, suggest that this configuration needs NO_MMCHECK or MMCHECK_FORCE defined. Other small mmalloc related cleanups. * config/sparc/sun4os4.mh (MMALLOC_CFLAGS): Define MMCHECK_FORCE to 1. * config/alpha/alpha-osf2.mh (MMALLOC_CFLAGS): Set to -DNO_MMCHECK. * config/sparc/xm-sun4os4.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT): * config/i386/xm-i386v4.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT): * config/i386/xm-linux.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT): * config/m68k/xm-hp300hpux.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT): * config/m68k/xm-m68kv4.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT); * config/m68k/xm-sun3os4.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT): * config/pa/xm-hppah.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT): * config/sparc/xm-sun4sol2.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT): Remove obsolete defines. * config/alpha/alpha-linux.mh (MMALLOC_DISABLE): * config/alpha/alpha-osf1.mh (MMALLOC_DISABLE): * config/rs6000/rs6000.mh (MMALLOC_DISABLE): * config/rs6000/aix4.mh (MMALLOC_DISABLE): * config/powerpc/aix4.mh (MMALLOC_DISABLE): * config/powerpc/aix.mh (MMALLOC_DISABLE): * config/ns32k/ns32km3.mh (MMALLOC_DISABLE): * config/mips/mipsm3.mh (MMALLOC_DISABLE): * config/mips/decstation.mh (MMALLOC_DISABLE): * config/m88k/cxux.mh (MMALLOC_DISABLE): * config/i386/i386mk.mh (MMALLOC_DISABLE): * config/i386/i386m3.mh (MMALLOC_DISABLE): * config/i386/i386gnu.mh (MMALLOC_DISABLE): Use MMALLOC_CFLAGS instead.
1996-07-11 07:41:51 +00:00
MMALLOC_CFLAGS = -I$(MMALLOC_SRC)
1993-06-23 22:59:35 +00:00
# Where is the BFD library? Typically in ../bfd.
1993-06-23 22:59:35 +00:00
BFD_DIR = ../bfd
BFD = $(BFD_DIR)/libbfd.a
BFD_SRC = $(srcdir)/$(BFD_DIR)
BFD_CFLAGS = -I$(BFD_DIR) -I$(BFD_SRC)
1993-06-23 22:59:35 +00:00
# Where is the READLINE library? Typically in ../readline.
READLINE_DIR = ../readline
READLINE = $(READLINE_DIR)/libreadline.a
READLINE_SRC = $(srcdir)/$(READLINE_DIR)
READLINE_CFLAGS = -I$(READLINE_SRC)
# Opcodes currently live in one of two places. Either they are in the
# opcode library, typically ../opcodes, or they are in a header file
# in INCLUDE_DIR.
# Where is the "-lopcodes" library, with (some of) the opcode tables and
# disassemblers?
OPCODES = ../opcodes/libopcodes.a
1993-06-23 22:59:35 +00:00
# Where are the other opcode tables which only have header file
# versions?
1993-06-24 23:16:00 +00:00
OP_INCLUDE = $(INCLUDE_DIR)/opcode
OPCODES_CFLAGS = -I$(OP_INCLUDE)
# The simulator is usually nonexistent; targets that include one
# should set this to list all the .o or .a files to be linked in.
SIM =
#start-sanitize-gdbtk
# Where is the TCL library? Typically in ../tcl.
LIB_INSTALL_DIR = $(libdir)
TCL = @TCL_LD_SEARCH_FLAGS@ @TCL_BUILD_LIB_SPEC@
TCL_CFLAGS = @TCLHDIR@
# Where is the TK library? Typically in ../tk.
TK = @TK_BUILD_LIB_SPEC@
TK_CFLAGS = @TKHDIR@
X11_CFLAGS = @TK_XINCLUDES@
X11_LDFLAGS =
X11_LIBS =
ENABLE_GDBTK= @ENABLE_GDBTK@
#end-sanitize-gdbtk
ENABLE_CFLAGS= @ENABLE_CFLAGS@
ENABLE_CLIBS= @ENABLE_CLIBS@
ENABLE_OBS= @ENABLE_OBS@
# -I. for config files.
# -I$(srcdir) for gdb internal headers and possibly for gnu-regex.h also.
1993-06-23 22:59:35 +00:00
# -I$(srcdir)/config for more generic config files.
# It is also possible that you will need to add -I/usr/include/sys if
# your system doesn't have fcntl.h in /usr/include (which is where it
# should be according to Posix).
DEFS = @DEFS@
GDB_CFLAGS = -I. -I$(srcdir) -I$(srcdir)/config $(DEFS)
1993-06-23 22:59:35 +00:00
# M{H,T}_CFLAGS, if defined, have host- and target-dependent CFLAGS
# from the config directory.
GLOBAL_CFLAGS = $(MT_CFLAGS) $(MH_CFLAGS)
#PROFILE_CFLAGS = -pg
# CFLAGS is specifically reserved for setting from the command line
1993-06-23 22:59:35 +00:00
# when running make. I.E. "make CFLAGS=-Wmissing-prototypes".
CFLAGS = -g
# Need to pass this to testsuite for "make check". Probably should be
# consistent with top-level Makefile.in and gdb/testsuite/Makefile.in
# so "make check" has the same result no matter where it is run.
CXXFLAGS = -g -O
1993-06-23 22:59:35 +00:00
# INTERNAL_CFLAGS is the aggregate of all other *CFLAGS macros.
INTERNAL_CFLAGS = $(CFLAGS) $(GLOBAL_CFLAGS) $(PROFILE_CFLAGS) \
$(GDB_CFLAGS) $(OPCODES_CFLAGS) $(READLINE_CFLAGS) \
* Makefile.in (INTERNAL_CFLAGS): Add ENABLE_CFLAGS. * fork-child.c (fork_inferior): Add call to TARGET_CREATE_INFERIOR_HOOK to allow target specific code to get control just before the new process executes it's first instruction. * remote-mips.c (mips_initialize): Cleanup a bit. Don't try to receive a packet at first. This speeds up initialization a lot. Use TARGET_MONITOR_PROMPT instead of "<IDT>". (common_breakpoint): Use rresponse instead of rerrflg to inspect error code. * symfile.c (syms_from_objfile reread_symbols): Call TARGET_SYMFILE_POSTREAD to allow target specific code to get control after reading new symbols. * target.h: New macros TARGET_SYMFILE_POSTREAD, and TARGET_CREATE_INFERIOR_HOOK. See above for descriptions. * config/mips/{irix5.mh nm-irix5.h}: Delete nm-irix5.h. Make NAT_FILE point directly at ../nm-sysv4.h. * config/mips/{mipsm3.mh nm-m3.h}: Delete nm-m3.h. Make NAT_FILE point directly at ../nm-m3.h. * config/mips/{mipsv4.mh nm-sysv4.h}: Delete nm-sysv4.h. Make NAT_FILE point directly at ../nm-sysv4.h. * config/mips/nm-mips.h: Improve comment at top of file. * config/mips/tm-mips.h (TARGET_MONITOR_PROMPT): Change definition into a proper string. start-sanitize-gm * configure configure.in: Add support for --enable-gm. (mips*-*-magic*): Change target from magic to idt. * eval.c expprint.c expression.h parse.c remote-mips.c utils.c: Change GENERAL_MAGIC_HACKS to GENERAL_MAGIC. * magic.c magic.h: Update files from GM. * config/mips/magic.mt: Delete. No longer necessary now that we use --enable mechanism. * config/mips/tm-idt.h: Add GM stuff needed for remote GM box. * config/mips/tm-irix5.h: Add GM stuff needed for native Irix box. * config/mips/tm-magic.h: Move up to config/tm-magic.h. Move all platform specific stuff into tm-irix.h and tm-idt.h. Add defs for TARGET_SYMFILE_POSTREAD and TARGET_CREATE_INFERIOR_HOOK. end-sanitize-gm
1995-11-04 19:02:42 +00:00
$(BFD_CFLAGS) $(MMALLOC_CFLAGS) $(INCLUDE_CFLAGS) $(ENABLE_CFLAGS)
# LDFLAGS is specifically reserved for setting from the command line
# when running make.
# Profiling options need to go here to work.
# I think it's perfectly reasonable for a user to set -pg in CFLAGS
# and have it work; that's why CFLAGS is here.
* Makefile.in: Add rule for hpux-thread.o (needs special header files). * (SUBDIRS): Remove mswin. * Change procedure for creating init.c. Speeds things up quite a bit. * config.in configure configure.in: Check for select, poll. * Check for OSF header files before including hpux-thread.o. * Don't configure doc or testsuite when building under MSVC. * findvar.c value.h (read_register_pid write_register_pid): Make global. Needed for hppa-tdep.c. * (supply_register): Don't set pid to inferior_pid when supplying registers. * hppa-tdep.c (saved_pc_after_call): frame_saved_pc -> FRAME_SAVED_PC. * (frame_saved_pc): Change name to hppa_frame_saved_pc. * (hppa_pop_frame): Don't use a pid of 0 with target_write_pc. Use write_pc instead, which uses the correct pid. * (target_read_pc target_write_pc): Use read/write_register_pid instead of read/write_register to preserve the pid passed in. * inftarg.c (child_can_run): Add flag child_suppress_run to allow hpux-threads.c to override this as a runnable target. * config/pa/nm-hppah.h: Define target_new_objfile and target_pid_to_str. * config/pa/tm-hppa.h (FRAME_SAVED_PC): Use hppa_frame_saved_pc instead of frame_saved_pc. * config/m68k/tm-m68k.h: Define TARGET_M68K for Wingdb. * config/m68k/tm-monitor.h: Use FRAME_CHAIN_VALID_ALTERNATE, since we can't easily determine the start file bounds with ELF. * config/mips/tm-mips.h: Define TARGET_MIPS for Wingdb. * hpux-thread.c: New file for HPUX/OSF thread support. * osf-share/{README AT386/cma_thread_io.h HP800/cma_thread_io.h RIOS/cma_thread_io.h cma_attr.h cma_deb_core.h cma_debug_client.h cma_errors.h cma_handle.h cma_init.h cma_list.h cma_mutex.h cma_sched.h cma_semaphore_defs.h cma_sequence.h cma_stack.h cma_stack_int.h cma_tcb_defs.h cma_util.h}: New files for OSF thread support.
1996-10-08 17:06:17 +00:00
INTERNAL_LDFLAGS = $(CFLAGS) $(GLOBAL_CFLAGS) $(PROFILE_CFLAGS) $(LDFLAGS) @CONFIG_LDFLAGS@ @HLDFLAGS@
HLDENV = @HLDENV@
# We are using our own version of REGEX now to be consistent across
# machines.
REGEX = gnu-regex.o
REGEX1 = gnu-regex.o
# If your system is missing alloca(), or, more likely, it's there but
1993-06-23 22:59:35 +00:00
# it doesn't work, then refer to libiberty.
# Libraries and corresponding dependencies for compiling gdb.
# {X,T}M_CLIBS, defined in *config files, have host- and target-dependent libs.
# TERMCAP comes after readline, since readline depends on it.
# MMALLOC comes after anything else that might want an allocation function.
# LIBIBERTY appears twice on purpose.
# If you have the Cygnus libraries installed,
1993-06-23 22:59:35 +00:00
# you can use 'CLIBS=$(INSTALLED_LIBS)' 'CDEPS='
INSTALLED_LIBS=-lbfd -lreadline -lopcodes -liberty $(ENABLE_CLIBS) \
$(TERMCAP) $(XM_CLIBS) $(TM_CLIBS) $(NAT_CLIBS) @LIBS@ \
-lmmalloc -liberty
CLIBS = $(SIM) $(BFD) $(READLINE) $(OPCODES) $(LIBIBERTY) $(ENABLE_CLIBS) \
$(TERMCAP) $(XM_CLIBS) $(TM_CLIBS) $(NAT_CLIBS) @LIBS@ \
$(MMALLOC) $(LIBIBERTY)
CDEPS = $(XM_CDEPS) $(TM_CDEPS) $(NAT_CDEPS) $(SIM) $(BFD) $(READLINE) \
$(OPCODES) $(MMALLOC) $(LIBIBERTY)
1993-06-23 22:59:35 +00:00
ADD_FILES = $(REGEX) $(XM_ADD_FILES) $(TM_ADD_FILES) $(NAT_ADD_FILES)
ADD_DEPS = $(REGEX1) $(XM_ADD_FILES) $(TM_ADD_FILES) $(NAT_ADD_FILES)
VERSION = 4.16.1
DIST=gdb
LINT=/usr/5bin/lint
1993-06-23 22:59:35 +00:00
LINTFLAGS= $(BFD_CFLAGS)
RUNTEST = `if [ -f $${rootsrc}/../dejagnu/runtest ] ; then \
echo $${rootsrc}/../dejagnu/runtest ; else echo runtest; \
fi`
1993-03-17 09:05:19 +00:00
RUNTESTFLAGS=
1993-03-03 03:15:52 +00:00
# This is ser-unix.o for any system which supports a v7/BSD/SYSV/POSIX
# interface to the serial port. Hopefully if get ported to OS/2, VMS,
# etc., then there will be (as part of the C library or perhaps as
# part of libiberty) a POSIX interface. But at least for now the
# host-dependent makefile fragment might need to use something else
# besides ser-unix.o
SER_HARDWIRE = ser-unix.o
# The `remote' debugging target is supported for most architectures,
# but not all (e.g. 960)
REMOTE_OBS = remote.o dcache.o remote-utils.o
# This is remote-sim.o if a simulator is to be linked in.
SIM_OBS =
ANNOTATE_OBS = annotate.o
# Host and target-dependent makefile fragments come in here.
@host_makefile_frag@
@target_makefile_frag@
# End of host and target-dependent makefile fragments
FLAGS_TO_PASS = \
"prefix=$(prefix)" \
"exec_prefix=$(exec_prefix)" \
"against=$(against)" \
"AR=$(AR)" \
"AR_FLAGS=$(AR_FLAGS)" \
"CC=$(CC)" \
"CFLAGS=$(CFLAGS)" \
"CHILLFLAGS=$(CHILLFLAGS)" \
"CHILL=$(CHILL)" \
"CHILL_LIB=$(CHILL_LIB)" \
"CXX=$(CXX)" \
"CXXFLAGS=$(CXXFLAGS)" \
"RANLIB=$(RANLIB)" \
"MAKEINFO=$(MAKEINFO)" \
"INSTALL=$(INSTALL)" \
"INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
"INSTALL_DATA=$(INSTALL_DATA)" \
1993-03-17 09:05:19 +00:00
"RUNTEST=$(RUNTEST)" \
"RUNTESTFLAGS=$(RUNTESTFLAGS)"
# Flags that we pass when building the testsuite.
# empty for native, $(target_alias)/ for cross
target_subdir = @target_subdir@
CC_FOR_TARGET = ` \
if [ -f $${rootme}/../gcc/xgcc ] ; then \
if [ -f $${rootme}/../$(target_subdir)newlib/Makefile ] ; then \
echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/ -idirafter $${rootme}/$(target_subdir)newlib/targ-include -idirafter $${rootsrc}/../$(target_subdir)newlib/libc/include -nostdinc -B$${rootme}/../$(target_subdir)newlib/; \
else \
echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/; \
fi; \
else \
if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
echo $(CC); \
else \
t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
fi; \
fi`
CXX = gcc
CXX_FOR_TARGET = ` \
if [ -f $${rootme}/../gcc/xgcc ] ; then \
if [ -f $${rootme}/../$(target_subdir)newlib/Makefile ] ; then \
echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/ -idirafter $${rootme}/$(target_subdir)newlib/targ-include -idirafter $${rootsrc}/../$(target_subdir)newlib/libc/include -nostdinc -B$${rootme}/../$(target_subdir)newlib/; \
else \
echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/; \
fi; \
else \
if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
echo $(CXX); \
else \
t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
fi; \
fi`
CHILLFLAGS = $(CFLAGS)
CHILL = gcc
CHILL_FOR_TARGET = ` \
if [ -f $${rootme}/../gcc/Makefile ] ; then \
echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/ -L$${rootme}/../gcc/ch/runtime/; \
else \
if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
echo $(CC); \
else \
t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
fi; \
fi`
CHILL_LIB = ` \
if [ -f $${rootme}/../gcc/ch/runtime/libchill.a ] ; then \
echo $${rootme}/../gcc/ch/runtime/chillrt0.o \
$${rootme}/../gcc/ch/runtime/libchill.a; \
else \
echo -lchill; \
fi`
# The use of $$(x_FOR_TARGET) reduces the command line length by not
# duplicating the lengthy definition.
TARGET_FLAGS_TO_PASS = \
"prefix=$(prefix)" \
"exec_prefix=$(exec_prefix)" \
"against=$(against)" \
'CC=$$(CC_FOR_TARGET)' \
"CC_FOR_TARGET=$(CC_FOR_TARGET)" \
"CFLAGS=$(CFLAGS)" \
"CHILLFLAGS=$(CHILLFLAGS)" \
'CHILL=$$(CHILL_FOR_TARGET)' \
"CHILL_FOR_TARGET=$(CHILL_FOR_TARGET)" \
"CHILL_LIB=$(CHILL_LIB)" \
'CXX=$$(CXX_FOR_TARGET)' \
"CXX_FOR_TARGET=$(CXX_FOR_TARGET)" \
"CXXFLAGS=$(CXXFLAGS)" \
"INSTALL=$(INSTALL)" \
"INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
"INSTALL_DATA=$(INSTALL_DATA)" \
"MAKEINFO=$(MAKEINFO)" \
1993-03-17 09:05:19 +00:00
"RUNTEST=$(RUNTEST)" \
"RUNTESTFLAGS=$(RUNTESTFLAGS)"
# All source files that go into linking GDB.
# Links made at configuration time should not be specified here, since
# SFILES is used in building the distribution archive.
* bcache.c, bcache.h: New files to implement a byte cache. * Makefile.in (SFILES): Add bcache.c. (symtab_h): Add bcache.h. (HFILES_NO_SRCDIR): add bcache.h (COMMON_OBJS): Add bcache.o (bcache.o): New target. * dbxread.c (start_psymtab): Make global_syms & static_syms type "partial_symbol **". * hpread.c (hpread_start_symtab): Ditto. * os9kread.c (os9k_start_psymtab): Ditto. * stabsread.h (start_psymtab): Ditto. * {symfile.c, symfile.h} (start_psymtab_common): Ditto. * maint.c (maintenance_print_statistics): Call print_symbol_bcache_statistics. * objfiles.c (allocate_objfile): Initialize psymbol bcache malloc and free pointers. * solib.c (allocate_rt_common_objfile): Ditto. * symfile.c (reread_symbols): Ditto. (free_objfile): Free psymbol bcache when objfile is freed. (objfile_relocate): Use new indirect psymbol pointers. * objfiles.h (struct objfile): Add psymbol cache. * symfile.c (compare_psymbols): Now passed pointers to pointers to psymbols. (reread_symbols): Free psymbol bcache when freeing other objfile resources. (add_psymbol_to_list, add_psymbol_addr_to_list): Initialize new psymbol using the psymbol bcache. (init_psymbol_list): Psymbol lists now contain pointers rather than the actual psymbols. * symfile.h (psymbol_allocation_list): Psymbol lists now dynamically grown arrays of pointers. (ADD_PSYMBOL_VT_TO_LIST): Initialize new symbol using the psymbol bcache. * symmisc.c (print_partial_symbols): Now takes pointer to pointer to partial symbol. (print_symbol_bcache_statistics): New function to print per objfile bcache statistics. (print_partial_symbol, print_partial_symbols, maintenance_check_symtabs, extend_psymbol_list): Account for change to pointer to pointer to partial symbol. * symtab.c (find_pc_psymbol, lookup_partial_symbol, decode_line_2, make_symbol_completion_list): Account for change to pointer to pointer to partial symbol. * symtab.h (bcache.h): Include. * xcoffread.c (xcoff_start_psymtab): Make global_syms & static_syms type "partial_symbol **".
1996-02-16 22:14:47 +00:00
SFILES = bcache.c blockframe.c breakpoint.c buildsym.c callback.c c-exp.y \
c-lang.c c-typeprint.c c-valprint.c ch-exp.c ch-lang.c \
ch-typeprint.c ch-valprint.c coffread.c command.c complaints.c \
corefile.c cp-valprint.c \
dbxread.c demangle.c dwarfread.c dwarf2read.c \
elfread.c environ.c eval.c expprint.c \
f-exp.y f-lang.c f-typeprint.c f-valprint.c findvar.c \
gdbtypes.c infcmd.c inflow.c infrun.c language.c \
1993-06-23 22:59:35 +00:00
m2-exp.y m2-lang.c m2-typeprint.c m2-valprint.c main.c maint.c \
mem-break.c minsyms.c mipsread.c nlmread.c objfiles.c parse.c \
printcmd.c remote.c remote-nrom.c scm-exp.c scm-lang.c scm-valprint.c \
source.c stabsread.c stack.c symfile.c symmisc.c \
symtab.c target.c thread.c top.c \
typeprint.c utils.c \
valarith.c valops.c valprint.c values.c \
serial.c ser-unix.c mdebugread.c os9kread.c
1993-06-23 22:59:35 +00:00
LINTFILES = $(SFILES) $(YYFILES) init.c
1993-06-23 22:59:35 +00:00
# "system" headers. Using these in dependencies is a rather personal
# choice. (-rich, summer 1993)
# (Why would we not want to depend on them? If one of these changes in a
# non-binary-compatible way, it is a real pain to remake the right stuff
# without these dependencies -kingdon, 13 Mar 1994)
getopt_h = $(INCLUDE_DIR)/getopt.h
floatformat_h = $(INCLUDE_DIR)/floatformat.h
bfd_h = $(BFD_DIR)/bfd.h
wait_h = $(INCLUDE_DIR)/wait.h
dis-asm_h = $(INCLUDE_DIR)/dis-asm.h
1993-06-23 22:59:35 +00:00
dcache_h = dcache.h
remote_utils_h = $(dcache_h) serial.h target.h remote-utils.h remote-sim.h
1993-06-23 22:59:35 +00:00
readline_headers = \
$(READLINE_SRC)/chardefs.h \
$(READLINE_SRC)/history.h \
$(READLINE_SRC)/keymaps.h \
$(READLINE_SRC)/readline.h
udiheaders = \
$(srcdir)/29k-share/udi/udiproc.h \
$(srcdir)/29k-share/udi/udiphcfg.h \
$(srcdir)/29k-share/udi/udiphunix.h \
$(srcdir)/29k-share/udi/udiptcfg.h \
$(srcdir)/29k-share/udi/udipt29k.h \
$(srcdir)/29k-share/udi/udisoc.h
1993-06-23 22:59:35 +00:00
gdbcore_h = gdbcore.h $(bfd_h)
frame_h = frame.h
* bcache.c, bcache.h: New files to implement a byte cache. * Makefile.in (SFILES): Add bcache.c. (symtab_h): Add bcache.h. (HFILES_NO_SRCDIR): add bcache.h (COMMON_OBJS): Add bcache.o (bcache.o): New target. * dbxread.c (start_psymtab): Make global_syms & static_syms type "partial_symbol **". * hpread.c (hpread_start_symtab): Ditto. * os9kread.c (os9k_start_psymtab): Ditto. * stabsread.h (start_psymtab): Ditto. * {symfile.c, symfile.h} (start_psymtab_common): Ditto. * maint.c (maintenance_print_statistics): Call print_symbol_bcache_statistics. * objfiles.c (allocate_objfile): Initialize psymbol bcache malloc and free pointers. * solib.c (allocate_rt_common_objfile): Ditto. * symfile.c (reread_symbols): Ditto. (free_objfile): Free psymbol bcache when objfile is freed. (objfile_relocate): Use new indirect psymbol pointers. * objfiles.h (struct objfile): Add psymbol cache. * symfile.c (compare_psymbols): Now passed pointers to pointers to psymbols. (reread_symbols): Free psymbol bcache when freeing other objfile resources. (add_psymbol_to_list, add_psymbol_addr_to_list): Initialize new psymbol using the psymbol bcache. (init_psymbol_list): Psymbol lists now contain pointers rather than the actual psymbols. * symfile.h (psymbol_allocation_list): Psymbol lists now dynamically grown arrays of pointers. (ADD_PSYMBOL_VT_TO_LIST): Initialize new symbol using the psymbol bcache. * symmisc.c (print_partial_symbols): Now takes pointer to pointer to partial symbol. (print_symbol_bcache_statistics): New function to print per objfile bcache statistics. (print_partial_symbol, print_partial_symbols, maintenance_check_symtabs, extend_psymbol_list): Account for change to pointer to pointer to partial symbol. * symtab.c (find_pc_psymbol, lookup_partial_symbol, decode_line_2, make_symbol_completion_list): Account for change to pointer to pointer to partial symbol. * symtab.h (bcache.h): Include. * xcoffread.c (xcoff_start_psymtab): Make global_syms & static_syms type "partial_symbol **".
1996-02-16 22:14:47 +00:00
symtab_h = symtab.h bcache.h
1993-06-23 22:59:35 +00:00
gdbtypes_h = gdbtypes.h
expression_h = expression.h
value_h = value.h $(symtab_h) $(gdbtypes_h) $(expression_h)
breakpoint_h = breakpoint.h $(frame_h) $(value_h)
command_h = command.h
gdbcmd_h = gdbcmd.h $(command_h)
defs_h = defs.h xm.h tm.h nm.h config.status config.h
1993-06-23 22:59:35 +00:00
inferior_h = inferior.h $(breakpoint_h)
# Header files that need to have srcdir added. Note that in the cases
# where we use a macro like $(gdbcmd_h), things are carefully arranged
# so that each .h file is listed exactly once (M-x tags-search works
# wrong if TAGS has files twice). Because this is tricky to get
# right, it is probably easiest just to list .h files here directly.
1993-06-23 22:59:35 +00:00
* bcache.c, bcache.h: New files to implement a byte cache. * Makefile.in (SFILES): Add bcache.c. (symtab_h): Add bcache.h. (HFILES_NO_SRCDIR): add bcache.h (COMMON_OBJS): Add bcache.o (bcache.o): New target. * dbxread.c (start_psymtab): Make global_syms & static_syms type "partial_symbol **". * hpread.c (hpread_start_symtab): Ditto. * os9kread.c (os9k_start_psymtab): Ditto. * stabsread.h (start_psymtab): Ditto. * {symfile.c, symfile.h} (start_psymtab_common): Ditto. * maint.c (maintenance_print_statistics): Call print_symbol_bcache_statistics. * objfiles.c (allocate_objfile): Initialize psymbol bcache malloc and free pointers. * solib.c (allocate_rt_common_objfile): Ditto. * symfile.c (reread_symbols): Ditto. (free_objfile): Free psymbol bcache when objfile is freed. (objfile_relocate): Use new indirect psymbol pointers. * objfiles.h (struct objfile): Add psymbol cache. * symfile.c (compare_psymbols): Now passed pointers to pointers to psymbols. (reread_symbols): Free psymbol bcache when freeing other objfile resources. (add_psymbol_to_list, add_psymbol_addr_to_list): Initialize new psymbol using the psymbol bcache. (init_psymbol_list): Psymbol lists now contain pointers rather than the actual psymbols. * symfile.h (psymbol_allocation_list): Psymbol lists now dynamically grown arrays of pointers. (ADD_PSYMBOL_VT_TO_LIST): Initialize new symbol using the psymbol bcache. * symmisc.c (print_partial_symbols): Now takes pointer to pointer to partial symbol. (print_symbol_bcache_statistics): New function to print per objfile bcache statistics. (print_partial_symbol, print_partial_symbols, maintenance_check_symtabs, extend_psymbol_list): Account for change to pointer to pointer to partial symbol. * symtab.c (find_pc_psymbol, lookup_partial_symbol, decode_line_2, make_symbol_completion_list): Account for change to pointer to pointer to partial symbol. * symtab.h (bcache.h): Include. * xcoffread.c (xcoff_start_psymtab): Make global_syms & static_syms type "partial_symbol **".
1996-02-16 22:14:47 +00:00
HFILES_NO_SRCDIR = bcache.h buildsym.h call-cmds.h coff-solib.h defs.h \
dst.h environ.h $(gdbcmd_h) gdbcore.h \
gcc -Wall lint: * breakpoint.c (watchpoint_check): Remove unused variable b. * stack.c (print_frame_info): Move sp and buf inside #if. * eval.c (evaluate_subexp): Remove unused variables pp, mangle_ptr, ptr, and mangle_tstr. * valarith.c (value_x_binop): Remove unused variables mangle_tstr and mangle_ptr. * symtab.c (lookup_symtab): Put variable copy inside #if. (decode_line_1): Put variable q1 inside #if 0. * target.h: Declare target_link. * infrun.c (wait_for_inferior): Remove unused variables signame. * remote.c (remote_resume): Remove unused variable name. * c-exp.y (parse_number): Parenthesize operand of shift. * dbxread.c (record_minimal_symbol): Parenthesize operand of && (this is a semantic change, the warning seems to have detected a bug). * dbxread.c (end_psymtab): Move variable p1 inside #if. * coffread.c: Move variable temptype inside #if. * ch-typeprint.c (chill_type_print_base): Remove unused variable name. * ch-valprint.c: #include typeprint.h and ch-lang.h. (chill_val_print): Remove unused variable in_range. (chill_val_print): Remove statement "length > TYPE_LENGTH (type);". (chill_val_print): Add default case for switch. * stabsread.h: Declare stabsect_build_psymtabs. * os9kread.c (read_minimal_symbols): Make this return void. (os9k_symfile_read): Remove unused variables stb_exist and val. (os9k_symfile_init): Remove unused variable val. (fill_sym): Remove unused variable id. (read_os9k_psymtab): Put variable back_to inside #if 0. Remove unused variable nsl. Remove unused variable symfile_bfd. #if 0 unused variables lbrac_unmatched_complaint and lbrac_mismatch_complaint. Remove declaration for non-existent function os9k_next_symbol_text. * annotate.c, annotate.h: New files, containing a function for each annotation which outputs it. * Move breakpoints_changed from breakpoint.c to annotate.c. * breakpoint.c, blockframe.c, infrun.c, cp-valprint.c, main.c, printcmd.c, source.c, stack.c, utils.c, valprint.c: Use annotate.c functions to output annotations. * Makefile.in (OBS): Add annotate.o.
1994-05-13 18:18:57 +00:00
gdb-stabs.h $(inferior_h) language.h minimon.h monitor.h \
1993-06-23 22:59:35 +00:00
objfiles.h parser-defs.h partial-stab.h serial.h signals.h solib.h \
symfile.h stabsread.h target.h terminal.h typeprint.h xcoffsolib.h \
c-lang.h ch-lang.h f-lang.h m2-lang.h \
complaints.h valprint.h \
1993-06-23 22:59:35 +00:00
29k-share/udi/udiids.h 29k-share/udi_soc nindy-share/b.out.h \
nindy-share/block_io.h nindy-share/coff.h \
nindy-share/env.h nindy-share/stop.h \
1993-06-23 22:59:35 +00:00
vx-share/dbgRpcLib.h vx-share/ptrace.h vx-share/vxTypes.h \
vx-share/vxWorks.h vx-share/wait.h vx-share/xdr_ld.h \
vx-share/xdr_ptrace.h vx-share/xdr_rdb.h gdbthread.h \
dcache.h remote-utils.h remote-sim.h top.h somsolib.h
gcc -Wall lint: * breakpoint.c (watchpoint_check): Remove unused variable b. * stack.c (print_frame_info): Move sp and buf inside #if. * eval.c (evaluate_subexp): Remove unused variables pp, mangle_ptr, ptr, and mangle_tstr. * valarith.c (value_x_binop): Remove unused variables mangle_tstr and mangle_ptr. * symtab.c (lookup_symtab): Put variable copy inside #if. (decode_line_1): Put variable q1 inside #if 0. * target.h: Declare target_link. * infrun.c (wait_for_inferior): Remove unused variables signame. * remote.c (remote_resume): Remove unused variable name. * c-exp.y (parse_number): Parenthesize operand of shift. * dbxread.c (record_minimal_symbol): Parenthesize operand of && (this is a semantic change, the warning seems to have detected a bug). * dbxread.c (end_psymtab): Move variable p1 inside #if. * coffread.c: Move variable temptype inside #if. * ch-typeprint.c (chill_type_print_base): Remove unused variable name. * ch-valprint.c: #include typeprint.h and ch-lang.h. (chill_val_print): Remove unused variable in_range. (chill_val_print): Remove statement "length > TYPE_LENGTH (type);". (chill_val_print): Add default case for switch. * stabsread.h: Declare stabsect_build_psymtabs. * os9kread.c (read_minimal_symbols): Make this return void. (os9k_symfile_read): Remove unused variables stb_exist and val. (os9k_symfile_init): Remove unused variable val. (fill_sym): Remove unused variable id. (read_os9k_psymtab): Put variable back_to inside #if 0. Remove unused variable nsl. Remove unused variable symfile_bfd. #if 0 unused variables lbrac_unmatched_complaint and lbrac_mismatch_complaint. Remove declaration for non-existent function os9k_next_symbol_text. * annotate.c, annotate.h: New files, containing a function for each annotation which outputs it. * Move breakpoints_changed from breakpoint.c to annotate.c. * breakpoint.c, blockframe.c, infrun.c, cp-valprint.c, main.c, printcmd.c, source.c, stack.c, utils.c, valprint.c: Use annotate.c functions to output annotations. * Makefile.in (OBS): Add annotate.o.
1994-05-13 18:18:57 +00:00
# Header files that already have srcdir in them, or which are in objdir.
gcc -Wall lint: * breakpoint.c (watchpoint_check): Remove unused variable b. * stack.c (print_frame_info): Move sp and buf inside #if. * eval.c (evaluate_subexp): Remove unused variables pp, mangle_ptr, ptr, and mangle_tstr. * valarith.c (value_x_binop): Remove unused variables mangle_tstr and mangle_ptr. * symtab.c (lookup_symtab): Put variable copy inside #if. (decode_line_1): Put variable q1 inside #if 0. * target.h: Declare target_link. * infrun.c (wait_for_inferior): Remove unused variables signame. * remote.c (remote_resume): Remove unused variable name. * c-exp.y (parse_number): Parenthesize operand of shift. * dbxread.c (record_minimal_symbol): Parenthesize operand of && (this is a semantic change, the warning seems to have detected a bug). * dbxread.c (end_psymtab): Move variable p1 inside #if. * coffread.c: Move variable temptype inside #if. * ch-typeprint.c (chill_type_print_base): Remove unused variable name. * ch-valprint.c: #include typeprint.h and ch-lang.h. (chill_val_print): Remove unused variable in_range. (chill_val_print): Remove statement "length > TYPE_LENGTH (type);". (chill_val_print): Add default case for switch. * stabsread.h: Declare stabsect_build_psymtabs. * os9kread.c (read_minimal_symbols): Make this return void. (os9k_symfile_read): Remove unused variables stb_exist and val. (os9k_symfile_init): Remove unused variable val. (fill_sym): Remove unused variable id. (read_os9k_psymtab): Put variable back_to inside #if 0. Remove unused variable nsl. Remove unused variable symfile_bfd. #if 0 unused variables lbrac_unmatched_complaint and lbrac_mismatch_complaint. Remove declaration for non-existent function os9k_next_symbol_text. * annotate.c, annotate.h: New files, containing a function for each annotation which outputs it. * Move breakpoints_changed from breakpoint.c to annotate.c. * breakpoint.c, blockframe.c, infrun.c, cp-valprint.c, main.c, printcmd.c, source.c, stack.c, utils.c, valprint.c: Use annotate.c functions to output annotations. * Makefile.in (OBS): Add annotate.o.
1994-05-13 18:18:57 +00:00
HFILES_WITH_SRCDIR = $(udiheaders) ../bfd/bfd.h
# GDB "info" files, which should be included in their entirety
INFOFILES = gdb.info*
REMOTE_EXAMPLES = m68k-stub.c i386-stub.c sparc-stub.c rem-multi.shar
POSSLIBS = gnu-regex.c gnu-regex.h
# {X,T,NAT}DEPFILES are something of a pain in that it's hard to
# default their values the way we do for SER_HARDWIRE; in the future
# maybe much of the stuff now in {X,T,NAT}DEPFILES will go into other
# variables analogous to SER_HARDWIRE which get defaulted in this
# Makefile.in
DEPFILES = $(TDEPFILES) $(XDEPFILES) $(SER_HARDWIRE) $(NATDEPFILES) \
$(REMOTE_OBS) $(SIM_OBS) $(ENABLE_OBS) @THREAD_DB_OBS@
SOURCES = $(SFILES) $(ALLDEPFILES) $(YYFILES)
# Don't include YYFILES (*.tab.c) because we already include *.y in SFILES,
# and it's more useful to see it in the .y file.
TAGFILES_NO_SRCDIR = $(SFILES) $(HFILES_NO_SRCDIR) $(ALLDEPFILES) \
$(POSSLIBS)
TAGFILES_WITH_SRCDIR = $(HFILES_WITH_SRCDIR)
1993-06-23 22:59:35 +00:00
COMMON_OBS = version.o blockframe.o breakpoint.o findvar.o stack.o thread.o \
1993-06-23 22:59:35 +00:00
source.o values.o eval.o valops.o valarith.o valprint.o printcmd.o \
symtab.o symfile.o symmisc.o infcmd.o infrun.o command.o \
expprint.o environ.o gdbtypes.o copying.o $(DEPFILES) \
mem-break.o target.o parse.o language.o $(YYOBJ) buildsym.o \
* bcache.c, bcache.h: New files to implement a byte cache. * Makefile.in (SFILES): Add bcache.c. (symtab_h): Add bcache.h. (HFILES_NO_SRCDIR): add bcache.h (COMMON_OBJS): Add bcache.o (bcache.o): New target. * dbxread.c (start_psymtab): Make global_syms & static_syms type "partial_symbol **". * hpread.c (hpread_start_symtab): Ditto. * os9kread.c (os9k_start_psymtab): Ditto. * stabsread.h (start_psymtab): Ditto. * {symfile.c, symfile.h} (start_psymtab_common): Ditto. * maint.c (maintenance_print_statistics): Call print_symbol_bcache_statistics. * objfiles.c (allocate_objfile): Initialize psymbol bcache malloc and free pointers. * solib.c (allocate_rt_common_objfile): Ditto. * symfile.c (reread_symbols): Ditto. (free_objfile): Free psymbol bcache when objfile is freed. (objfile_relocate): Use new indirect psymbol pointers. * objfiles.h (struct objfile): Add psymbol cache. * symfile.c (compare_psymbols): Now passed pointers to pointers to psymbols. (reread_symbols): Free psymbol bcache when freeing other objfile resources. (add_psymbol_to_list, add_psymbol_addr_to_list): Initialize new psymbol using the psymbol bcache. (init_psymbol_list): Psymbol lists now contain pointers rather than the actual psymbols. * symfile.h (psymbol_allocation_list): Psymbol lists now dynamically grown arrays of pointers. (ADD_PSYMBOL_VT_TO_LIST): Initialize new symbol using the psymbol bcache. * symmisc.c (print_partial_symbols): Now takes pointer to pointer to partial symbol. (print_symbol_bcache_statistics): New function to print per objfile bcache statistics. (print_partial_symbol, print_partial_symbols, maintenance_check_symtabs, extend_psymbol_list): Account for change to pointer to pointer to partial symbol. * symtab.c (find_pc_psymbol, lookup_partial_symbol, decode_line_2, make_symbol_completion_list): Account for change to pointer to pointer to partial symbol. * symtab.h (bcache.h): Include. * xcoffread.c (xcoff_start_psymtab): Make global_syms & static_syms type "partial_symbol **".
1996-02-16 22:14:47 +00:00
exec.o bcache.o objfiles.o minsyms.o maint.o demangle.o \
dbxread.o coffread.o elfread.o \
dwarfread.o dwarf2read.o mipsread.o stabsread.o corefile.o \
c-lang.o ch-exp.o ch-lang.o f-lang.o m2-lang.o \
scm-exp.o scm-lang.o scm-valprint.o complaints.o typeprint.o \
c-typeprint.o ch-typeprint.o f-typeprint.o m2-typeprint.o \
c-valprint.o cp-valprint.o ch-valprint.o f-valprint.o m2-valprint.o \
Thu Sep 28 14:32:11 1995 steve chamberlain <sac@slash.cygnus.com> * callback.[ch]: New files. * remote-rdp.c: Support for the ARM RDP monitor. * Makefile: Update. * arm-tdep.c (arm_othernames): New. (_initialize_arm_tdep): install 'othernames' command. (arm_nullified_insn, shifted_reg_val, arm_get_next_pc): New. * configure.in: Check for termios.h, termio.h and sgtty.h. (i[345]86-*-win32*): New host. * configure: Regenerated. * inflow.c: Clean up inclusions. * main.c (main): Check for WINGDB, not WIN32. * printcmd.c (do_examine): Put QUIT test in loop. * remote-hms.c (e7000_load): Delete. (hms_ops): Point to generic_load instead. * remote-hms.c (hms_ops): Point to generic_load. * remote-sim.c (sim_callback_write_stdout): Becomes gdbsim_write_stdout. (gdbsim_load): Call generic_load. * remote-utils.c (gr_load_image): Delete. * ser-unix.c (terminal.h): Include instead of havig own #if tree. (hardwire_flush_input): Reset input buffer too. * source.c (openp): If WIN32 then open file in binary mode. * terminal.h: Configure IO mechanism using autoconf defines if available and not overriden. * utils.c (quit, pollquit, notice_quit): WIN32 check becomes WINGDB check. * config/arm/arm.mt (TDEPFILES): Add remote-rdp.o * config/arm/tm-arm.h (TARGET_BYTE_ORDER): becomes TARGET_BYTE_ORDER_SELECTABLE. (ADDR_BITS_REMOVE): New. (ORIGINAL_REGISTER_NAMES, ADDITIONAL_REGISTER_NAMES): New. (INST_xx): New (FRAME_FIND_SAVED_REGS): Pass the right argument. (arm_get_next_pc): Declare. * mswin/prebuilt/*/bfdtarget.h (SELECT_ARCHITECTURES): Need leading &.
1995-09-29 00:14:01 +00:00
nlmread.o serial.o mdebugread.o os9kread.o top.o utils.o callback.o
OBS = $(COMMON_OBS) $(ANNOTATE_OBS) main.o
LIBGDB_OBS =
TSOBS = inflow.o
NTSOBS = standalone.o
NTSSTART = kdb-start.o
* Makefile.in: Add rule for hpux-thread.o (needs special header files). * (SUBDIRS): Remove mswin. * Change procedure for creating init.c. Speeds things up quite a bit. * config.in configure configure.in: Check for select, poll. * Check for OSF header files before including hpux-thread.o. * Don't configure doc or testsuite when building under MSVC. * findvar.c value.h (read_register_pid write_register_pid): Make global. Needed for hppa-tdep.c. * (supply_register): Don't set pid to inferior_pid when supplying registers. * hppa-tdep.c (saved_pc_after_call): frame_saved_pc -> FRAME_SAVED_PC. * (frame_saved_pc): Change name to hppa_frame_saved_pc. * (hppa_pop_frame): Don't use a pid of 0 with target_write_pc. Use write_pc instead, which uses the correct pid. * (target_read_pc target_write_pc): Use read/write_register_pid instead of read/write_register to preserve the pid passed in. * inftarg.c (child_can_run): Add flag child_suppress_run to allow hpux-threads.c to override this as a runnable target. * config/pa/nm-hppah.h: Define target_new_objfile and target_pid_to_str. * config/pa/tm-hppa.h (FRAME_SAVED_PC): Use hppa_frame_saved_pc instead of frame_saved_pc. * config/m68k/tm-m68k.h: Define TARGET_M68K for Wingdb. * config/m68k/tm-monitor.h: Use FRAME_CHAIN_VALID_ALTERNATE, since we can't easily determine the start file bounds with ELF. * config/mips/tm-mips.h: Define TARGET_MIPS for Wingdb. * hpux-thread.c: New file for HPUX/OSF thread support. * osf-share/{README AT386/cma_thread_io.h HP800/cma_thread_io.h RIOS/cma_thread_io.h cma_attr.h cma_deb_core.h cma_debug_client.h cma_errors.h cma_handle.h cma_init.h cma_list.h cma_mutex.h cma_sched.h cma_semaphore_defs.h cma_sequence.h cma_stack.h cma_stack_int.h cma_tcb_defs.h cma_util.h}: New files for OSF thread support.
1996-10-08 17:06:17 +00:00
SUBDIRS = doc testsuite nlm
# For now, shortcut the "configure GDB for fewer languages" stuff.
YYFILES = c-exp.tab.c f-exp.tab.c m2-exp.tab.c
YYOBJ = c-exp.tab.o f-exp.tab.o m2-exp.tab.o
# Things which need to be built when making a distribution.
DISTSTUFF = $(YYFILES)
# Prevent Sun make from putting in the machine type. Setting
# TARGET_ARCH to nothing works for SunOS 3, 4.0, but not for 4.1.
.c.o:
1993-06-23 22:59:35 +00:00
$(CC) -c $(INTERNAL_CFLAGS) $<
all: gdb
1993-05-01 00:34:05 +00:00
@$(MAKE) $(FLAGS_TO_PASS) DO=all "DODIRS=`echo $(SUBDIRS) | sed 's/testsuite//'`" subdir_do
1993-03-03 03:15:52 +00:00
1993-03-23 08:03:44 +00:00
installcheck:
# The check target can not use subdir_do, because subdir_do does not
# use TARGET_FLAGS_TO_PASS.
1993-03-17 09:05:19 +00:00
check: force
@if [ -f testsuite/Makefile ]; then \
rootme=`pwd`; export rootme; \
rootsrc=`cd $(srcdir); pwd`; export rootsrc; \
cd testsuite; \
$(MAKE) $(TARGET_FLAGS_TO_PASS) check; \
else true; fi
1993-06-23 22:59:35 +00:00
info dvi install-info clean-info: force
1993-05-01 00:34:05 +00:00
@$(MAKE) $(FLAGS_TO_PASS) DO=$@ "DODIRS=$(SUBDIRS)" subdir_do
gdb.z:gdb.1
nroff -man $(srcdir)/gdb.1 | col -b > gdb.t
pack gdb.t ; rm -f gdb.t
mv gdb.t.z gdb.z
1993-06-24 23:16:00 +00:00
1993-06-23 22:59:35 +00:00
# Traditionally "install" depends on "all". But it may be useful
# not to; for example, if the user has made some trivial change to a
# source file and doesn't care about rebuilding or just wants to save the
# time it takes for make to check that all is up to date.
1993-06-23 22:59:35 +00:00
# install-only is intended to address that need.
install: all install-only
install-only:
transformed_name=`t='$(program_transform_name)'; \
1995-09-20 17:24:12 +00:00
echo gdb | sed -e $$t` ; \
if test "x$$transformed_name" = x; then \
transformed_name=gdb ; \
else \
true ; \
fi ; \
$(INSTALL_PROGRAM) gdb $(bindir)/$$transformed_name ; \
$(INSTALL_DATA) $(srcdir)/gdb.1 $(man1dir)/$$transformed_name.1
# start-sanitize-gdbtk
if [ x"$(ENABLE_GDBTK)" != x ] ; then \
$(INSTALL_DATA) $(srcdir)/gdbtk.tcl $(datadir)/gdbtk.tcl ; \
else \
true ; \
fi
# end-sanitize-gdbtk
1993-06-23 22:59:35 +00:00
@$(MAKE) DO=install "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS) subdir_do
1993-06-23 22:59:35 +00:00
uninstall: force
transformed_name=`t='$(program_transform_name)'; \
1995-09-20 17:24:12 +00:00
echo gdb | sed -e $$t` ; \
if test "x$$transformed_name" = x; then \
transformed_name=gdb ; \
else \
true ; \
fi ; \
rm -f $(bindir)/$$transformed_name $(man1dir)/$$transformed_name.1
# start-sanitize-gdbtk
if [ x"$(ENABLE_GDBTK)" != x ] ; then \
rm -f $(datadir)/gdbtk.tcl ; \
fi
# end-sanitize-gdbtk
1993-06-23 22:59:35 +00:00
@$(MAKE) DO=uninstall "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS) subdir_do
# We do this by grepping through sources. If that turns out to be too slow,
# maybe we could just require every .o file to have an initialization routine
# of a given name (remote-udi.o -> _initialize_remote_udi, etc.).
#
# Formatting conventions: The name of the _initialize_* routines must start
# in column zero, and must not be inside #if.
#
# Note that the set of files with init functions might change, or the names
# of the functions might change, so this files needs to depend on all the
# object files that will be linked into gdb.
init.c: $(OBS) $(TSOBS)
@echo Making init.c
@rm -f init.c-tmp
@echo '/* Do not modify this file. */' >init.c-tmp
@echo '/* It is created automatically by the Makefile. */'>>init.c-tmp
* Makefile.in: Add mswin to SUBDIRS. Add rules for mswin/libwingdb.a and remote-wiggler.o. * breakpoint.c (breakpoint_here_p): Clean up bp enabled test. * (breakpoint_inserted_here_p): New func, just like breakpoint_here_p, except it's honest. Honestly. * breakpoint.h: Proto for above. start-sanitize-gdbtk * configure configure.in: Add host *windows* to list of hosts that don't support GDBtk. end-sanitize-gdbtk * configure configure.in: Add mswin to configdirs if host is i[3456]86-*-windows. * core-aout.c (fetch_core_registers register_addr) gdbcore.h: Change all vars that can contain addresses to type CORE_ADDR. * findvar.c (supply_register): Allow val to be NULL. This means that regno is unsupported. * (read_pc read_pc_pid write_pc write_pc_pid): Make non-pid forms just call pid forms with inferior_pid so that there's only once place to hack PC's and such. * infrun.c (proceed): Don't skip breakpoints if user changed PC. * remote-wiggler.c: New file. Support for BDM interface from Macraigor Systems. * serial.c: Enhance serial logging capability. Add hex and octal output modes (set remotelogbase {hex|octal|ascii}. Also log breaks, timeouts, errors, and eofs. * serial.h: Redefine SERIAL_SEND_BREAK to go through a wrapper function so that we can log breaks. Don't export serial_logfile or serial_logfp. * top.c (execute_command): Don't test for serial_logfp here. Just call serial_log_comand, and let serial.c sort it out. * valops.c (value_of_variable): Don't attempt to establish frames for static and global variables. This makes things work a bit better if the stack or frame pointer is trashed. * config/m68k/monitor.mt (TDEPFILES): Add remote-wiggler.o. * config/m68k/tm-m68k.h: Define STACK_ALIGN. CPU32 can't hack misaligned stacks during function calls.
1996-09-05 01:01:05 +00:00
@echo '#include "ansidecl.h"' >>init.c-tmp
@echo 'extern void initialize_all_files PARAMS ((void));' >>init.c-tmp
@echo 'void initialize_all_files PARAMS ((void)) {' >>init.c-tmp
* Makefile.in: Add rule for hpux-thread.o (needs special header files). * (SUBDIRS): Remove mswin. * Change procedure for creating init.c. Speeds things up quite a bit. * config.in configure configure.in: Check for select, poll. * Check for OSF header files before including hpux-thread.o. * Don't configure doc or testsuite when building under MSVC. * findvar.c value.h (read_register_pid write_register_pid): Make global. Needed for hppa-tdep.c. * (supply_register): Don't set pid to inferior_pid when supplying registers. * hppa-tdep.c (saved_pc_after_call): frame_saved_pc -> FRAME_SAVED_PC. * (frame_saved_pc): Change name to hppa_frame_saved_pc. * (hppa_pop_frame): Don't use a pid of 0 with target_write_pc. Use write_pc instead, which uses the correct pid. * (target_read_pc target_write_pc): Use read/write_register_pid instead of read/write_register to preserve the pid passed in. * inftarg.c (child_can_run): Add flag child_suppress_run to allow hpux-threads.c to override this as a runnable target. * config/pa/nm-hppah.h: Define target_new_objfile and target_pid_to_str. * config/pa/tm-hppa.h (FRAME_SAVED_PC): Use hppa_frame_saved_pc instead of frame_saved_pc. * config/m68k/tm-m68k.h: Define TARGET_M68K for Wingdb. * config/m68k/tm-monitor.h: Use FRAME_CHAIN_VALID_ALTERNATE, since we can't easily determine the start file bounds with ELF. * config/mips/tm-mips.h: Define TARGET_MIPS for Wingdb. * hpux-thread.c: New file for HPUX/OSF thread support. * osf-share/{README AT386/cma_thread_io.h HP800/cma_thread_io.h RIOS/cma_thread_io.h cma_attr.h cma_deb_core.h cma_debug_client.h cma_errors.h cma_handle.h cma_init.h cma_list.h cma_mutex.h cma_sched.h cma_semaphore_defs.h cma_sequence.h cma_stack.h cma_stack_int.h cma_tcb_defs.h cma_util.h}: New files for OSF thread support.
1996-10-08 17:06:17 +00:00
@echo $(OBS) $(TSOBS) | \
tr ' ' '\012' | \
sed -e '/^Onindy.o/d' \
-e '/^nindy.o/d' \
-e '/ttyflush.o/d' \
-e '/xdr_ld.o/d' \
-e '/xdr_ptrace.o/d' \
-e '/xdr_rdb.o/d' \
-e '/udr.o/d' \
-e '/udip2soc.o/d' \
-e '/udi2go32.o/d' \
-e '/version.o/d' \
-e '/^[a-z0-9A-Z_]*_[SU].o/d' \
-e '/[a-z0-9A-Z_]*-exp.tab.o/d' \
* Makefile.in: Add rule for hpux-thread.o (needs special header files). * (SUBDIRS): Remove mswin. * Change procedure for creating init.c. Speeds things up quite a bit. * config.in configure configure.in: Check for select, poll. * Check for OSF header files before including hpux-thread.o. * Don't configure doc or testsuite when building under MSVC. * findvar.c value.h (read_register_pid write_register_pid): Make global. Needed for hppa-tdep.c. * (supply_register): Don't set pid to inferior_pid when supplying registers. * hppa-tdep.c (saved_pc_after_call): frame_saved_pc -> FRAME_SAVED_PC. * (frame_saved_pc): Change name to hppa_frame_saved_pc. * (hppa_pop_frame): Don't use a pid of 0 with target_write_pc. Use write_pc instead, which uses the correct pid. * (target_read_pc target_write_pc): Use read/write_register_pid instead of read/write_register to preserve the pid passed in. * inftarg.c (child_can_run): Add flag child_suppress_run to allow hpux-threads.c to override this as a runnable target. * config/pa/nm-hppah.h: Define target_new_objfile and target_pid_to_str. * config/pa/tm-hppa.h (FRAME_SAVED_PC): Use hppa_frame_saved_pc instead of frame_saved_pc. * config/m68k/tm-m68k.h: Define TARGET_M68K for Wingdb. * config/m68k/tm-monitor.h: Use FRAME_CHAIN_VALID_ALTERNATE, since we can't easily determine the start file bounds with ELF. * config/mips/tm-mips.h: Define TARGET_MIPS for Wingdb. * hpux-thread.c: New file for HPUX/OSF thread support. * osf-share/{README AT386/cma_thread_io.h HP800/cma_thread_io.h RIOS/cma_thread_io.h cma_attr.h cma_deb_core.h cma_debug_client.h cma_errors.h cma_handle.h cma_init.h cma_list.h cma_mutex.h cma_sched.h cma_semaphore_defs.h cma_sequence.h cma_stack.h cma_stack_int.h cma_tcb_defs.h cma_util.h}: New files for OSF thread support.
1996-10-08 17:06:17 +00:00
-e 's/\.o/.c/' \
-e 's|\([^ ][^ ]*\)|$(srcdir)/\1|g' | \
xargs grep -s '^_initialize_[a-z_0-9A-Z]* *(' | \
sed -n -e 's/^.*://' -e 's/^\([a-z_0-9A-Z]*\).*/ {extern void \1 PARAMS ((void)); \1 ();}/' >>init.c-tmp
@echo '}' >>init.c-tmp
@mv init.c-tmp init.c
1993-06-23 22:59:35 +00:00
.PRECIOUS: init.c
# Removing the old gdb first works better if it is running, at least on SunOS.
gdb: $(OBS) $(TSOBS) $(ADD_DEPS) $(CDEPS) init.o
rm -f gdb
* Makefile.in: Add rule for hpux-thread.o (needs special header files). * (SUBDIRS): Remove mswin. * Change procedure for creating init.c. Speeds things up quite a bit. * config.in configure configure.in: Check for select, poll. * Check for OSF header files before including hpux-thread.o. * Don't configure doc or testsuite when building under MSVC. * findvar.c value.h (read_register_pid write_register_pid): Make global. Needed for hppa-tdep.c. * (supply_register): Don't set pid to inferior_pid when supplying registers. * hppa-tdep.c (saved_pc_after_call): frame_saved_pc -> FRAME_SAVED_PC. * (frame_saved_pc): Change name to hppa_frame_saved_pc. * (hppa_pop_frame): Don't use a pid of 0 with target_write_pc. Use write_pc instead, which uses the correct pid. * (target_read_pc target_write_pc): Use read/write_register_pid instead of read/write_register to preserve the pid passed in. * inftarg.c (child_can_run): Add flag child_suppress_run to allow hpux-threads.c to override this as a runnable target. * config/pa/nm-hppah.h: Define target_new_objfile and target_pid_to_str. * config/pa/tm-hppa.h (FRAME_SAVED_PC): Use hppa_frame_saved_pc instead of frame_saved_pc. * config/m68k/tm-m68k.h: Define TARGET_M68K for Wingdb. * config/m68k/tm-monitor.h: Use FRAME_CHAIN_VALID_ALTERNATE, since we can't easily determine the start file bounds with ELF. * config/mips/tm-mips.h: Define TARGET_MIPS for Wingdb. * hpux-thread.c: New file for HPUX/OSF thread support. * osf-share/{README AT386/cma_thread_io.h HP800/cma_thread_io.h RIOS/cma_thread_io.h cma_attr.h cma_deb_core.h cma_debug_client.h cma_errors.h cma_handle.h cma_init.h cma_list.h cma_mutex.h cma_sched.h cma_semaphore_defs.h cma_sequence.h cma_stack.h cma_stack_int.h cma_tcb_defs.h cma_util.h}: New files for OSF thread support.
1996-10-08 17:06:17 +00:00
$(HLDENV) $(CC_LD) $(INTERNAL_LDFLAGS) -o gdb \
init.o $(OBS) $(TSOBS) $(ADD_FILES) $(CLIBS) $(LOADLIBES)
nlm: force
rootme=`pwd`; export rootme; $(MAKE) $(TARGET_FLAGS_TO_PASS) DO=all DODIRS=nlm subdir_do
libgdb: libgdb-files $(LIBGDB_OBS)
# libproc is not listed here because all-libproc is a dependency of all-gui,
# not all-gdb, and thus might be built after us.
LIBGDBDEPS=$(COMMON_OBS) $(LIBGDB_OBS) $(TSOBS) $(ADD_DEPS) $(CDEPS) init.o
# libproc needs to be before libiberty for alloca.
LIBGDBFILES=$(COMMON_OBS) $(LIBGDB_OBS) $(TSOBS) ../libproc/libproc.a \
$(ADD_DEPS) $(CDEPS) init.o
libgdb-files: $(LIBGDBDEPS) Makefile.in
-rm -f libgdb-files
for i in $(LIBGDBFILES); do\
echo $$i >> libgdb-files;\
done
saber_gdb: $(SFILES) $(DEPFILES) copying.c version.c
1993-06-23 22:59:35 +00:00
#setopt load_flags $(CFLAGS) $(BFD_CFLAGS) -DHOST_SYS=SUN4_SYS
#load ./init.c $(SFILES)
#unload $(srcdir)/c-exp.y $(srcdir)/m2-exp.y
1993-06-23 22:59:35 +00:00
#unload vx-share/*.h
#unload nindy-share/[A-Z]*
#load c-exp.tab.c m2-exp.tab.c
#load copying.c version.c
#load ../opcodes/libopcodes.a
#load ../libiberty/libiberty.a
#load ../bfd/libbfd.a
#load ../readline/libreadline.a
#load ../mmalloc/libmmalloc.a
#load -ltermcap
#load `echo " "$(DEPFILES) | sed -e 's/\.o/.c/g' -e 's, , ../,g'`
echo "Load .c corresponding to:" $(DEPFILES)
# A Mach 3.0 program to force gdb back to command level
stop-gdb: stop-gdb.o
${CC_LD} $(GLOBAL_CFLAGS) $(LDFLAGS) -o stop-gdb \
stop-gdb.o $(CLIBS) $(LOADLIBES)
# This is useful when debugging GDB, because some Unix's don't let you run GDB
# on itself without copying the executable. So "make gdb1" will make
# gdb and put a copy in gdb1, and you can run it with "gdb gdb1".
# Removing gdb1 before the copy is the right thing if gdb1 is open
# in another process.
gdb1: gdb
rm -f gdb1
cp gdb gdb1
1993-06-23 22:59:35 +00:00
### fixme - this can't be right.
# This checks the configure.in file versus the config/ directory.
config-check: config-check-hosts config-check-targets
config-check-hosts:
1993-06-23 22:59:35 +00:00
grep gdb_host= $(srcdir)/configure.in | \
sed -e 's/.*gdb_host=//' -e 's/ ;;$$/.mh/' | sort -u >HOSTconf.o
1993-06-23 22:59:35 +00:00
(cd $(srcdir)/config; ls *.mh) >HOSTdir.o
diff -u HOSTconf.o HOSTdir.o
1993-06-23 22:59:35 +00:00
### fixme - nor can this.
config-check-targets:
1993-06-23 22:59:35 +00:00
grep gdb_target= $(srcdir)/configure.in | \
sed -e 's/.*gdb_target=//' -e 's/ ;;$$/.mh/' | sort -u >TARGconf.o
1993-06-23 22:59:35 +00:00
(cd $(srcdir)/config; ls *.mt) >TARGdir.o
diff -u HOSTconf.o HOSTdir.o
1993-06-23 22:59:35 +00:00
# FIXME. These are not generated by "make depend" because they only are there
# for some machines.
# But these rules don't do what we want; we want to hack the foo.o: tm.h
# dependency to do the right thing.
tm-isi.h tm-sun3.h tm-news.h tm-hp300bsd.h tm-altos.h: tm-m68k.h
tm-hp300hpux.h tm-sun2.h tm-3b1.h: tm-m68k.h
xm-news1000.h: xm-news.h
xm-i386-sv32.h: xm-i386.h
tm-i386gas.h: tm-i386.h
xm-sun4os4.h: xm-sparc.h
tm-sun4os4.h: tm-sparc.h
xm-vaxult.h: xm-vax.h
xm-vaxbsd.h: xm-vax.h
1993-06-23 22:59:35 +00:00
kdb: $(NTSSTART) $(OBS) $(NTSOBS) $(ADD_DEPS) $(CDEPS)
ld -o kdb $(NTSSTART) $(OBS) $(NTSOBS) init.o $(ADD_FILES) \
-lc $(CLIBS)
1993-04-30 18:06:32 +00:00
# Put the proper machine-specific files first, so M-. on a machine
# specific routine gets the one for the correct machine. (FIXME: those
# files go in twice; we should be removing them from the main list).
# TAGS depends on all the files that go into it so you can rebuild TAGS
# with `make TAGS' and not have to say `rm TAGS' first.
TAGS: $(TAGFILES_NO_SRCDIR) $(TAGFILES_WITH_SRCDIR)
@echo Making TAGS
@etags $(srcdir)/$(TM_FILE) \
$(srcdir)/$(XM_FILE) \
$(srcdir)/$(NAT_FILE) \
`(for i in $(DEPFILES) $(TAGFILES_NO_SRCDIR); do \
1993-06-23 22:59:35 +00:00
echo $(srcdir)/$$i ; \
done ; for i in $(TAGFILES_WITH_SRCDIR); do \
echo $$i ; \
done) | sed -e 's/\.o$$/\.c/'` \
`find $(srcdir)/config -name '*.h' -print`
1993-06-23 22:59:35 +00:00
tags: TAGS
1994-01-16 17:47:47 +00:00
clean mostlyclean:
@$(MAKE) $(FLAGS_TO_PASS) DO=clean "DODIRS=$(SUBDIRS)" subdir_do
rm -f *.o $(ADD_FILES) *~ init.c-tmp
rm -f init.c version.c
rm -f gdb core make.log libgdb-files
rm -f gdb[0-9]
# This used to depend on c-exp.tab.c m2-exp.tab.c TAGS
# I believe this is wrong; the makefile standards for distclean just
# describe removing files; the only sort of "re-create a distribution"
# functionality described is if the distributed files are unmodified.
distclean: clean
@$(MAKE) $(FLAGS_TO_PASS) DO=distclean "DODIRS=$(SUBDIRS)" subdir_do
rm -f nm.h tm.h xm.h config.status config.h stamp-h
rm -f y.output yacc.acts yacc.tmp y.tab.h
rm -f config.log config.cache
1993-06-23 22:59:35 +00:00
rm -f Makefile
1995-09-20 17:24:12 +00:00
maintainer-clean realclean: clean
@echo "This command is intended for maintainers to use;"
@echo "it deletes files that may require special tools to rebuild."
@$(MAKE) $(FLAGS_TO_PASS) DO=maintainer-clean "DODIRS=$(SUBDIRS)" subdir_do
rm -f c-exp.tab.c f-exp.tab.c m2-exp.tab.c
rm -f TAGS $(INFOFILES)
rm -f nm.h tm.h xm.h config.status
rm -f y.output yacc.acts yacc.tmp
rm -f config.log config.cache
1993-06-23 22:59:35 +00:00
rm -f Makefile
diststuff: $(DISTSTUFF)
* bcache.c, bcache.h: New files to implement a byte cache. * Makefile.in (SFILES): Add bcache.c. (symtab_h): Add bcache.h. (HFILES_NO_SRCDIR): add bcache.h (COMMON_OBJS): Add bcache.o (bcache.o): New target. * dbxread.c (start_psymtab): Make global_syms & static_syms type "partial_symbol **". * hpread.c (hpread_start_symtab): Ditto. * os9kread.c (os9k_start_psymtab): Ditto. * stabsread.h (start_psymtab): Ditto. * {symfile.c, symfile.h} (start_psymtab_common): Ditto. * maint.c (maintenance_print_statistics): Call print_symbol_bcache_statistics. * objfiles.c (allocate_objfile): Initialize psymbol bcache malloc and free pointers. * solib.c (allocate_rt_common_objfile): Ditto. * symfile.c (reread_symbols): Ditto. (free_objfile): Free psymbol bcache when objfile is freed. (objfile_relocate): Use new indirect psymbol pointers. * objfiles.h (struct objfile): Add psymbol cache. * symfile.c (compare_psymbols): Now passed pointers to pointers to psymbols. (reread_symbols): Free psymbol bcache when freeing other objfile resources. (add_psymbol_to_list, add_psymbol_addr_to_list): Initialize new psymbol using the psymbol bcache. (init_psymbol_list): Psymbol lists now contain pointers rather than the actual psymbols. * symfile.h (psymbol_allocation_list): Psymbol lists now dynamically grown arrays of pointers. (ADD_PSYMBOL_VT_TO_LIST): Initialize new symbol using the psymbol bcache. * symmisc.c (print_partial_symbols): Now takes pointer to pointer to partial symbol. (print_symbol_bcache_statistics): New function to print per objfile bcache statistics. (print_partial_symbol, print_partial_symbols, maintenance_check_symtabs, extend_psymbol_list): Account for change to pointer to pointer to partial symbol. * symtab.c (find_pc_psymbol, lookup_partial_symbol, decode_line_2, make_symbol_completion_list): Account for change to pointer to pointer to partial symbol. * symtab.h (bcache.h): Include. * xcoffread.c (xcoff_start_psymtab): Make global_syms & static_syms type "partial_symbol **".
1996-02-16 22:14:47 +00:00
cd doc; $(MAKE) $(MFLAGS) all-doc
subdir_do: force
@for i in $(DODIRS); do \
if [ -f ./$$i/Makefile ] ; then \
if (cd ./$$i; \
$(MAKE) $(FLAGS_TO_PASS) $(DO)) ; then true ; \
else exit 1 ; fi ; \
else true ; fi ; \
done
Makefile: Makefile.in config.status @frags@
1993-06-23 22:59:35 +00:00
$(SHELL) config.status
config.h: stamp-h ; @true
stamp-h: config.in config.status
CONFIG_HEADERS=config.h:config.in $(SHELL) config.status
config.status: configure
$(SHELL) config.status --recheck
force:
# Documentation!
# GDB QUICK REFERENCE (TeX dvi file, CM fonts)
doc/refcard.dvi:
cd doc; $(MAKE) refcard.dvi $(FLAGS_TO_PASS)
# GDB QUICK REFERENCE (PostScript output, common PS fonts)
doc/refcard.ps:
cd doc; $(MAKE) refcard.ps $(FLAGS_TO_PASS)
# GDB MANUAL: TeX dvi file
doc/gdb.dvi:
cd doc; $(MAKE) gdb.dvi $(FLAGS_TO_PASS)
# GDB MANUAL: info file
doc/gdb.info:
cd doc; $(MAKE) gdb.info $(FLAGS_TO_PASS)
# Make copying.c from COPYING
1993-06-23 22:59:35 +00:00
copying.c: COPYING copying.awk
awk -f $(srcdir)/copying.awk < $(srcdir)/COPYING > copying.c
version.c: Makefile
echo 'char *version = "$(VERSION)";' >version.c
echo 'char *host_name = "$(host_alias)";' >> version.c
echo 'char *target_name = "$(target_alias)";' >> version.c
1993-06-23 22:59:35 +00:00
# c-exp.tab.c is generated in objdir from c-exp.y if it doesn't exist
# in srcdir, then compiled in objdir to c-exp.tab.o.
# If we said c-exp.tab.c rather than ./c-exp.tab.c some makes
# would sometimes re-write it into $(srcdir)/c-exp.tab.c.
# Remove bogus decls for malloc/realloc/free which conflict with everything
# else. Strictly speaking c-exp.tab.c should therefore depend on
# Makefile.in, but that was a pretty big annoyance.
c-exp.tab.o: c-exp.tab.c
c-exp.tab.c: c-exp.y
1993-06-23 22:59:35 +00:00
$(YACC) $(YFLAGS) $(srcdir)/c-exp.y
-sed -e '/extern.*malloc/d' \
-e '/extern.*realloc/d' \
-e '/extern.*free/d' \
* Makefile.in (SFILES_MAINDIR): Add ch-exp.y. * Makefile.in (YYFILES): Add ch-exp.tab.c. * Makefile.in (YYOBJ): Add ch-exp.tab.o. * Makefile.in (saber_gdb): Add unload of ch-exp.y and load of ch-exp.tab.c. * Makefile.in (distclean): Add target ch-exp.tab.c. * Makefile.in (realclean): Add rm of ch-exp.tab.c. * Makefile.in (c-exp.tab.c, m2-exp.tab.c): Add dependency on Makefile since it contains sed patterns used in generation. Add sed pattern to also delete #include of any malloc.h. * Makefile.in (ch-exp.tab.o, ch-exp.tab.c): New targets. * ch-exp.y: New expression parser, for GNU-Chill. * c-exp.y, expr.c, expression.h, language.c, m2-exp.y, parser-defs.h, valarith.c, valops.c, value.h: Remap macros and function names to conform to K&R terminology with respect to logical and bitwise operators: UNOP_ZEROP => UNOP_LOGICAL_NOT UNOP_LOGNOT => UNOP_COMPLEMENT BINOP_LOGAND => BINOP_BITWISE_AND BINOP_LOGXOR => BINOP_BITWISE_XOR BINOP_LOGIOR => BINOP_BITWISE_IOR BINOP_AND => BINOP_LOGICAL_AND BINOP_OR => BINOP_LOGICAL_OR PREC_OR => PREC_LOGICAL_OR PREC_AND => PREC_LOGICAL_AND PREC_LOGIOR => PREC_BITWISE_IOR PREC_LOGXOR => PREC_BITWISE_XOR PREC_LOGAND => PREC_BITWISE_AND value_zerop() => value_logical_not() value_lognot() => value_complement() * c-exp.y (c_op_print_tab): Add explicit empty terminator. * m2-exp.y (m2_op_print_tab): Add explicit empty terminator. * defs.h (enum language): Add language_chill. * dwarfread.c (set_cu_language): Add LANG_CHILL case and make LANG_MODULA2 a recognized language. * eval.c (evaluate_subexp): Add OP_BOOL case. * expprint.c (print_subexp): Add OP_BOOL case. * gdbtypes.h (enum_typecode): Note TYPE_CODE_BOOL used for Chill as well as Modula-2. * gdbtypes.y (builtin_type_chill_bool, builtin_type_chill_long, builtin_type_chill_ulong, builtin_type_chill_real): Add. * i387-tdep.c (sys/dir.h): Remove, appears to be unnecessary and is nonexistant in some SVR4 based systems. * language.c (DEFAULT_ALLOCSIZE): Change from 3 => 4. * language.c (set_language_command): Add chill. * language.c (binop_result_type, integral_type, character_type, boolean_type, structured_type, value_true, binop_type_check): Add language_chill cases. * language.h (_LANG_chill): Define. * m2-exp.y (number_sign, modblock): Make static, #ifdef out unused modblock. * m2-exp.y (ANDAND): Rename to LOGICAL_AND. * source.c (source_info): Fix minor nits, print "1 line" rather than "1 lines", and "language is <lang>". * symfile.c (deduce_language_from_filename): Recognize the filename extensions ".chill", ".c186", and ".c286" for Chill. * valarith.c (value_binop): Handle TYPE_CODE_BOOL as well as TYPE_CODE_INT and TYPE_CODE_FLOAT. * valprint.c (val_print): Print TYPE_CODE_BOOL type values as "TRUE" or "FALSE". * valprint.c (typedef_print): Add case for language_chill. * values.c (value_from_longest): Handle TYPE_CODE_BOOL.
1992-11-15 17:28:02 +00:00
-e '/include.*malloc.h/d' \
-e 's/malloc/xmalloc/g' \
-e 's/realloc/xrealloc/g' \
< y.tab.c > c-exp.new
-rm y.tab.c
mv c-exp.new ./c-exp.tab.c
f-exp.tab.o: f-exp.tab.c
f-exp.tab.c: f-exp.y c-exp.tab.c
$(YACC) $(YFLAGS) $(srcdir)/f-exp.y
-sed -e '/extern.*malloc/d' \
-e '/extern.*realloc/d' \
-e '/extern.*free/d' \
-e '/include.*malloc.h/d' \
-e 's/malloc/xmalloc/g' \
-e 's/realloc/xrealloc/g' \
< y.tab.c > f-exp.new
-rm y.tab.c
mv f-exp.new ./f-exp.tab.c
1993-06-23 22:59:35 +00:00
# m2-exp.tab.c is generated in objdir from m2-exp.y if it doesn't exist
# in srcdir, then compiled in objdir to m2-exp.tab.o.
* Makefile.in (SFILES_MAINDIR): Add ch-exp.y. * Makefile.in (YYFILES): Add ch-exp.tab.c. * Makefile.in (YYOBJ): Add ch-exp.tab.o. * Makefile.in (saber_gdb): Add unload of ch-exp.y and load of ch-exp.tab.c. * Makefile.in (distclean): Add target ch-exp.tab.c. * Makefile.in (realclean): Add rm of ch-exp.tab.c. * Makefile.in (c-exp.tab.c, m2-exp.tab.c): Add dependency on Makefile since it contains sed patterns used in generation. Add sed pattern to also delete #include of any malloc.h. * Makefile.in (ch-exp.tab.o, ch-exp.tab.c): New targets. * ch-exp.y: New expression parser, for GNU-Chill. * c-exp.y, expr.c, expression.h, language.c, m2-exp.y, parser-defs.h, valarith.c, valops.c, value.h: Remap macros and function names to conform to K&R terminology with respect to logical and bitwise operators: UNOP_ZEROP => UNOP_LOGICAL_NOT UNOP_LOGNOT => UNOP_COMPLEMENT BINOP_LOGAND => BINOP_BITWISE_AND BINOP_LOGXOR => BINOP_BITWISE_XOR BINOP_LOGIOR => BINOP_BITWISE_IOR BINOP_AND => BINOP_LOGICAL_AND BINOP_OR => BINOP_LOGICAL_OR PREC_OR => PREC_LOGICAL_OR PREC_AND => PREC_LOGICAL_AND PREC_LOGIOR => PREC_BITWISE_IOR PREC_LOGXOR => PREC_BITWISE_XOR PREC_LOGAND => PREC_BITWISE_AND value_zerop() => value_logical_not() value_lognot() => value_complement() * c-exp.y (c_op_print_tab): Add explicit empty terminator. * m2-exp.y (m2_op_print_tab): Add explicit empty terminator. * defs.h (enum language): Add language_chill. * dwarfread.c (set_cu_language): Add LANG_CHILL case and make LANG_MODULA2 a recognized language. * eval.c (evaluate_subexp): Add OP_BOOL case. * expprint.c (print_subexp): Add OP_BOOL case. * gdbtypes.h (enum_typecode): Note TYPE_CODE_BOOL used for Chill as well as Modula-2. * gdbtypes.y (builtin_type_chill_bool, builtin_type_chill_long, builtin_type_chill_ulong, builtin_type_chill_real): Add. * i387-tdep.c (sys/dir.h): Remove, appears to be unnecessary and is nonexistant in some SVR4 based systems. * language.c (DEFAULT_ALLOCSIZE): Change from 3 => 4. * language.c (set_language_command): Add chill. * language.c (binop_result_type, integral_type, character_type, boolean_type, structured_type, value_true, binop_type_check): Add language_chill cases. * language.h (_LANG_chill): Define. * m2-exp.y (number_sign, modblock): Make static, #ifdef out unused modblock. * m2-exp.y (ANDAND): Rename to LOGICAL_AND. * source.c (source_info): Fix minor nits, print "1 line" rather than "1 lines", and "language is <lang>". * symfile.c (deduce_language_from_filename): Recognize the filename extensions ".chill", ".c186", and ".c286" for Chill. * valarith.c (value_binop): Handle TYPE_CODE_BOOL as well as TYPE_CODE_INT and TYPE_CODE_FLOAT. * valprint.c (val_print): Print TYPE_CODE_BOOL type values as "TRUE" or "FALSE". * valprint.c (typedef_print): Add case for language_chill. * values.c (value_from_longest): Handle TYPE_CODE_BOOL.
1992-11-15 17:28:02 +00:00
# Remove bogus decls for malloc/realloc/free which conflict with everything
# else.
m2-exp.tab.o: m2-exp.tab.c
m2-exp.tab.c: m2-exp.y
1993-06-23 22:59:35 +00:00
$(YACC) $(YFLAGS) $(srcdir)/m2-exp.y
-sed -e '/extern.*malloc/d' \
-e '/extern.*realloc/d' \
-e '/extern.*free/d' \
* Makefile.in (SFILES_MAINDIR): Add ch-exp.y. * Makefile.in (YYFILES): Add ch-exp.tab.c. * Makefile.in (YYOBJ): Add ch-exp.tab.o. * Makefile.in (saber_gdb): Add unload of ch-exp.y and load of ch-exp.tab.c. * Makefile.in (distclean): Add target ch-exp.tab.c. * Makefile.in (realclean): Add rm of ch-exp.tab.c. * Makefile.in (c-exp.tab.c, m2-exp.tab.c): Add dependency on Makefile since it contains sed patterns used in generation. Add sed pattern to also delete #include of any malloc.h. * Makefile.in (ch-exp.tab.o, ch-exp.tab.c): New targets. * ch-exp.y: New expression parser, for GNU-Chill. * c-exp.y, expr.c, expression.h, language.c, m2-exp.y, parser-defs.h, valarith.c, valops.c, value.h: Remap macros and function names to conform to K&R terminology with respect to logical and bitwise operators: UNOP_ZEROP => UNOP_LOGICAL_NOT UNOP_LOGNOT => UNOP_COMPLEMENT BINOP_LOGAND => BINOP_BITWISE_AND BINOP_LOGXOR => BINOP_BITWISE_XOR BINOP_LOGIOR => BINOP_BITWISE_IOR BINOP_AND => BINOP_LOGICAL_AND BINOP_OR => BINOP_LOGICAL_OR PREC_OR => PREC_LOGICAL_OR PREC_AND => PREC_LOGICAL_AND PREC_LOGIOR => PREC_BITWISE_IOR PREC_LOGXOR => PREC_BITWISE_XOR PREC_LOGAND => PREC_BITWISE_AND value_zerop() => value_logical_not() value_lognot() => value_complement() * c-exp.y (c_op_print_tab): Add explicit empty terminator. * m2-exp.y (m2_op_print_tab): Add explicit empty terminator. * defs.h (enum language): Add language_chill. * dwarfread.c (set_cu_language): Add LANG_CHILL case and make LANG_MODULA2 a recognized language. * eval.c (evaluate_subexp): Add OP_BOOL case. * expprint.c (print_subexp): Add OP_BOOL case. * gdbtypes.h (enum_typecode): Note TYPE_CODE_BOOL used for Chill as well as Modula-2. * gdbtypes.y (builtin_type_chill_bool, builtin_type_chill_long, builtin_type_chill_ulong, builtin_type_chill_real): Add. * i387-tdep.c (sys/dir.h): Remove, appears to be unnecessary and is nonexistant in some SVR4 based systems. * language.c (DEFAULT_ALLOCSIZE): Change from 3 => 4. * language.c (set_language_command): Add chill. * language.c (binop_result_type, integral_type, character_type, boolean_type, structured_type, value_true, binop_type_check): Add language_chill cases. * language.h (_LANG_chill): Define. * m2-exp.y (number_sign, modblock): Make static, #ifdef out unused modblock. * m2-exp.y (ANDAND): Rename to LOGICAL_AND. * source.c (source_info): Fix minor nits, print "1 line" rather than "1 lines", and "language is <lang>". * symfile.c (deduce_language_from_filename): Recognize the filename extensions ".chill", ".c186", and ".c286" for Chill. * valarith.c (value_binop): Handle TYPE_CODE_BOOL as well as TYPE_CODE_INT and TYPE_CODE_FLOAT. * valprint.c (val_print): Print TYPE_CODE_BOOL type values as "TRUE" or "FALSE". * valprint.c (typedef_print): Add case for language_chill. * values.c (value_from_longest): Handle TYPE_CODE_BOOL.
1992-11-15 17:28:02 +00:00
-e '/include.*malloc.h/d' \
-e 's/malloc/xmalloc/g' \
-e 's/realloc/xrealloc/g' \
< y.tab.c > m2-exp.new
-rm y.tab.c
mv m2-exp.new ./m2-exp.tab.c
# These files are updated atomically, so make never has to remove them
.PRECIOUS: m2-exp.tab.c f-exp.tab.c c-exp.tab.c
lint: $(LINTFILES)
$(LINT) $(INCLUDE_CFLAGS) $(LINTFLAGS) $(LINTFILES) \
`echo $(DEPFILES) | sed 's/\.o /\.c /g'`
gdb.cxref: $(SFILES)
cxref -I. $(SFILES) >gdb.cxref
force_update:
# GNU Make has an annoying habit of putting *all* the Makefile variables
# into the environment, unless you include this target as a circumvention.
# Rumor is that this will be fixed (and this target can be removed)
# in GNU Make 4.0.
.NOEXPORT:
# GNU Make 3.63 has a different problem: it keeps tacking command line
# overrides onto the definition of $(MAKE). This variable setting
# will remove them.
MAKEOVERRIDES=
## This is ugly, but I don't want GNU make to put these variables in
## the environment. Older makes will see this as a set of targets
## with no dependencies and no actions.
unexport CHILLFLAGS CHILL_LIB CHILL_FOR_TARGET :
ALLDEPFILES = 29k-share/udi/udip2soc.c 29k-share/udi/udr.c \
29k-share/udi/udi2go32.c \
a29k-tdep.c a68v-nat.c alpha-nat.c alpha-tdep.c \
Changes to support alpha OSF/1 in native mode. * alpha-nat.c, alpha-tdep.c, config/alpha/alpha-osf1.mt, config/alpha/nm-alpha.h, config/alpha/tm-alpha.h, osfsolib.c: New files. * Makefile.in: Add new files and dependencies. * configure.in: Add alpha target. * config/alpha/alpha-osf1.mh (NATDEPFILES): Add osfsolib.o * config/alpha/alpha-osf1.mh (MH_CFLAGS): Remove, we can handle shared libraries now. * config/alpha/xm-alpha.h: Cleanup, get MAKEVA_* defines right. * defs.h (CORE_ADDR): Make its type overridable via CORE_ADDR_TYPE, provide `unsigned int' default. * breakpoint.c (breakpoint_auto_delete): Delete only if we really stopped for the breakpoint. * stabsread.c, stabsread.h (define_symbol): Change valu parameter to a CORE_ADDR. * stabsread.c (read_range_type): Handle the case where the lower bound overflows and the upper doesn't and the range is legal. * infrun.c (resume): Do not step a breakpoint instruction if CANNOT_STEP_BREAKPOINT is defined. * inferior.h (CALL_DUMMY_LOCATION): New variant AT_ENTRY_POINT. Now that we have the bp_call_dummy breakpoint the call dummy code is no longer needed. PUSH_DUMMY_FRAME, PUSH_ARGUMENTS and FIX_CALL_DUMMY can be used to set up everything for the dummy. The breakpoint for the dummy is set at the entry point and thats it. * blockframe.c (inside_entry_file, inside_entry_func): Do not stop backtraces if pc is in the call dummy at the entry point. * infcmd.c (run_stack_dummy): Handle AT_ENTRY_POINT case. Use the expected breakpoint pc when setting up the frame for set_momentary_breakpoint. * symfile.c (entry_point_address): New function for AT_ENTRY_POINT support. * valops.c (call_function_by_hand): Handle AT_ENTRY_POINT case.
1993-10-05 19:44:57 +00:00
altos-xdep.c arm-convert.s \
arm-tdep.c arm-xdep.c coff-solib.c \
* coredep.c: Renamed to core-aout.c * core-svr4.c: Renamed to core-regset.c * Makefile.in (ALLDEPFILES): Account for renamings. * corelow.c (core_file_fns): Add, points to chain of structs. (add_core_fns): New function to build chain of structs. (get_core_registers): Modify to search core functions chain and call appropriate fetch_core_registers function based on core file flavour. * gdbcore.h (fetch_core_registers): Remove declaration. (struct core_fns): Define struct for core function info. * i386m3-nat.c: Update comment for filename change (coredep->core-aout) * a68v-nat.c (fetch_core_registers): Remove stub, not needed now. * alpha-nat.c (fetch_core_registers): Make static. (alpha_core_fns, _initialize_core_alpha): New struct and func. * core-aout.c (fetch_core_registers): Make static (aout_core_fns, _initialize_core_aout): New struct and func. * core-regset.c (fetch_core_registers): Make static. (regset_core_fns, _initialize_core_regset): New struct and func. * core-sol2.c (fetch_core_registers): Make static. (solaris_core_fns, _initialize_core_solaris): New struct and func. * hp300ux-nat.c (fetch_core_registers): Make static. (hp300ux_core_fns, _initialize_core_hp300ux): New struct and func. * i386aix-nat.c (fetch_core_registers): Make static. (i386aix_core_fns, _initialize_core_i386aix): New struct and func. * i386mach-nat.c (fetch_core_registers: Make static. (i386mach_core_fns, _initialize_core_i386mach): New struct and func. * irix4-nat.c (fetch_core_registers): Make static. (irix4_core_fns, _initialize_core_irix4): New struct and func. * irix5-nat.c (fetch_core_registers): (irix5_core_fns, _initialize_core_irix5): New struct and func. * lynx-nat.c (fetch_core_registers): Make static. (lynx_core_fns, _initialize_core_lynx): New struct and func. * mips-nat.c (fetch_core_registers): Make static. (mips_core_fns, _initialize_core_mips): New struct and func. * ns32km3-nat.c (fetch_core_registers): Remove stub. * rs6000-nat.c (fetch_core_registers): Make static. (rs6000_core_fns, _initialize_core_rs6000): New struct and func. * sparc-nat.c (fetch_core_registers): Make static. (sparc_core_fns, _initialize_core_sparc): New struct and func. * sun3-nat.c (fetch_core_registers): (sun3_core_fns, _initialize_core_sun3): New struct and func. * sun386-nat.c (fetch_core_registers): Remove stub. * ultra3-nat.c (fetch_core_registers): Make static. (ultra3_core_fns, _initialize_core_ultra3): New struct and func. * config/gould/pn.mh (XDEPFILES), config/i386/fbsd.mh (NATDEPFILES), config/i386/i386bsd.mh (NATDEPFILES), config/i386/i386m3.mh (XDEPFILES), config/i386/i386sco.mh (NATDEPFILES), config/i386/i386sco4.mh (NATDEPFILES), config/i386/i386v.mh (NATDEPFILES), config/i386/i386v32.mh (NATDEPFILES), config/i386/nbsd.mh (NATDEPFILES), config/i386/ptx.mh (XDEPFILES), config/i386/ptx4.mh (XDEPFILES), config/i386/symmetry.mh (NATDEPFILES), config/m68k/3b1.mh (XDEPFILES), config/m68k/cisco.mt (TDEPFILES), config/m68k/delta68.mh (NATDEPFILES), config/m68k/dpx2.mh (NATDEPFILES), config/m68k/hp300bsd.mh (NATDEPFILES), config/m68k/hp300hpux.mh (NATDEPFILES), config/m68k/isi.mh (XDEPFILES), config/m68k/news.mh (NATDEPFILES), config/m68k/news1000.mh (XDEPFILES), config/m88k/cxux.mh (NATDEPFILES), config/m88k/delta88.mh (NATDEPFILES), config/mips/littlemips.mh (XDEPFILES), config/mips/mipsm3.mh (XDEPFILES), config/ns32k/merlin.mh (XDEPFILES), config/ns32k/nbsd.mh (NATDEPFILES), config/ns32k/ns32km3.mh (NATDEPFILES), config/pa/hppabsd.mh (NATDEPFILES), config/pa/hppahpux.mh (NATDEPFILES), config/romp/rtbsd.mh (XDEPFILES), config/tahoe/tahoe.mh (XDEPFILES), config/vax/vaxbsd.mh (XDEPFILES), config/vax/vaxult.mh (NATDEPFILES), config/vax/vaxult2.mh (NATDEPFILES), Account for coredep.o to core-aout.o name change. * config/i386/i386dgux (NATDEPFILES), config/i386/i386sol2.mh (NATDEPFILES), config/i386/i386v4.mh (NATDEPFILES), config/i386/linux.mh (NATDEPFILES), config/i386/ncr3000.mh (NATDEPFILES), config/m68k/m68kv4.mh (NATDEPFILES), config/m88k/delta88v4.mh (NATDEPFILES), config/mips/mipsv4.mh (NATDEPFILES), Account for core-svr4.o to core-regset.o name change.
1996-01-11 20:08:15 +00:00
convex-tdep.c convex-xdep.c \
core-sol2.c core-regset.c core-aout.c corelow.c \
dcache.c delta68-nat.c dpx2-nat.c dstread.c exec.c fork-child.c \
go32-xdep.c gould-tdep.c gould-xdep.c h8300-tdep.c h8500-tdep.c \
hp300ux-nat.c hppa-tdep.c hppab-nat.c hppah-nat.c \
hpread.c \
i386-tdep.c i386b-nat.c i386mach-nat.c i386v-nat.c \
i386aix-nat.c i386m3-nat.c i386v4-nat.c i386ly-tdep.c \
i387-tdep.c \
i960-tdep.c \
infptrace.c inftarg.c irix4-nat.c irix5-nat.c isi-xdep.c \
lynx-nat.c m3-nat.c \
m68k-tdep.c \
m88k-nat.c m88k-tdep.c mac-nat.c mips-nat.c \
gcc -Wall lint: * breakpoint.c (watchpoint_check): Remove unused variable b. * stack.c (print_frame_info): Move sp and buf inside #if. * eval.c (evaluate_subexp): Remove unused variables pp, mangle_ptr, ptr, and mangle_tstr. * valarith.c (value_x_binop): Remove unused variables mangle_tstr and mangle_ptr. * symtab.c (lookup_symtab): Put variable copy inside #if. (decode_line_1): Put variable q1 inside #if 0. * target.h: Declare target_link. * infrun.c (wait_for_inferior): Remove unused variables signame. * remote.c (remote_resume): Remove unused variable name. * c-exp.y (parse_number): Parenthesize operand of shift. * dbxread.c (record_minimal_symbol): Parenthesize operand of && (this is a semantic change, the warning seems to have detected a bug). * dbxread.c (end_psymtab): Move variable p1 inside #if. * coffread.c: Move variable temptype inside #if. * ch-typeprint.c (chill_type_print_base): Remove unused variable name. * ch-valprint.c: #include typeprint.h and ch-lang.h. (chill_val_print): Remove unused variable in_range. (chill_val_print): Remove statement "length > TYPE_LENGTH (type);". (chill_val_print): Add default case for switch. * stabsread.h: Declare stabsect_build_psymtabs. * os9kread.c (read_minimal_symbols): Make this return void. (os9k_symfile_read): Remove unused variables stb_exist and val. (os9k_symfile_init): Remove unused variable val. (fill_sym): Remove unused variable id. (read_os9k_psymtab): Put variable back_to inside #if 0. Remove unused variable nsl. Remove unused variable symfile_bfd. #if 0 unused variables lbrac_unmatched_complaint and lbrac_mismatch_complaint. Remove declaration for non-existent function os9k_next_symbol_text. * annotate.c, annotate.h: New files, containing a function for each annotation which outputs it. * Move breakpoints_changed from breakpoint.c to annotate.c. * breakpoint.c, blockframe.c, infrun.c, cp-valprint.c, main.c, printcmd.c, source.c, stack.c, utils.c, valprint.c: Use annotate.c functions to output annotations. * Makefile.in (OBS): Add annotate.o.
1994-05-13 18:18:57 +00:00
mips-tdep.c mipsm3-nat.c mipsv4-nat.c news-xdep.c \
nindy-share/Onindy.c nindy-share/nindy.c \
nindy-share/ttyflush.c nindy-tdep.c \
ns32k-tdep.c ns32km3-nat.c osfsolib.c \
somread.c somsolib.c $(HPREAD_SOURCE) \
procfs.c pyr-tdep.c pyr-xdep.c \
remote-adapt.c remote-array.c remote-bug.c remote-e7000.c remote-eb.c \
remote-es.c remote-hms.c remote-mips.c \
Thu Sep 28 14:32:11 1995 steve chamberlain <sac@slash.cygnus.com> * callback.[ch]: New files. * remote-rdp.c: Support for the ARM RDP monitor. * Makefile: Update. * arm-tdep.c (arm_othernames): New. (_initialize_arm_tdep): install 'othernames' command. (arm_nullified_insn, shifted_reg_val, arm_get_next_pc): New. * configure.in: Check for termios.h, termio.h and sgtty.h. (i[345]86-*-win32*): New host. * configure: Regenerated. * inflow.c: Clean up inclusions. * main.c (main): Check for WINGDB, not WIN32. * printcmd.c (do_examine): Put QUIT test in loop. * remote-hms.c (e7000_load): Delete. (hms_ops): Point to generic_load instead. * remote-hms.c (hms_ops): Point to generic_load. * remote-sim.c (sim_callback_write_stdout): Becomes gdbsim_write_stdout. (gdbsim_load): Call generic_load. * remote-utils.c (gr_load_image): Delete. * ser-unix.c (terminal.h): Include instead of havig own #if tree. (hardwire_flush_input): Reset input buffer too. * source.c (openp): If WIN32 then open file in binary mode. * terminal.h: Configure IO mechanism using autoconf defines if available and not overriden. * utils.c (quit, pollquit, notice_quit): WIN32 check becomes WINGDB check. * config/arm/arm.mt (TDEPFILES): Add remote-rdp.o * config/arm/tm-arm.h (TARGET_BYTE_ORDER): becomes TARGET_BYTE_ORDER_SELECTABLE. (ADDR_BITS_REMOVE): New. (ORIGINAL_REGISTER_NAMES, ADDITIONAL_REGISTER_NAMES): New. (INST_xx): New (FRAME_FIND_SAVED_REGS): Pass the right argument. (arm_get_next_pc): Declare. * mswin/prebuilt/*/bfdtarget.h (SELECT_ARCHITECTURES): Need leading &.
1995-09-29 00:14:01 +00:00
remote-mm.c remote-nindy.c remote-os9k.c remote-rdp.c remote-sim.c \
remote-st.c remote-utils.c dcache.c \
remote-udi.c remote-vx.c remote-vx29k.c \
rs6000-nat.c rs6000-tdep.c \
ser-go32.c ser-tcp.c sh-tdep.c solib.c sparc-nat.c \
sparc-tdep.c sparcl-tdep.c sun3-nat.c sun386-nat.c \
symm-tdep.c symm-nat.c \
tahoe-tdep.c ultra3-nat.c ultra3-xdep.c umax-xdep.c \
vax-tdep.c \
vx-share/xdr_ld.c vx-share/xdr_ptrace.c vx-share/xdr_rdb.c \
win32-nat.c \
xcoffread.c xcoffsolib.c z8k-tdep.c
1993-06-23 22:59:35 +00:00
ALLCONFIG = config/a29k/a29k-kern.mt config/a29k/a29k-udi.mt config/a29k/vx29k.mt\
1993-06-23 22:59:35 +00:00
config/a29k/a29k.mt config/a29k/ultra3.mh config/a29k/ultra3.mt \
* README: Add note about SPARCworks cc release 3.0 and higher. Add procfs support for Alpha OSF/1-2.x. * config/alpha/nm-osf.h: Renamed from nm-alpha.h, generic OSF/1 native support. * config/alpha/alpha-osf1.mh (NAT_FILE): Changed accordingly. (MUNCH_DEFINE): Removed. * config/alpha/alpha-osf2.mh, config/alpha/nm-osf2.h: New files for procfs support. * configure.in (alpha-dec-osf*): Use alpha-osf2.mh for OSF/1 release 2.x and higher, else alpha-osf1.mh, as the procfs support in release 1.x is incomplete. * Makefile.in (ALLCONFIG): Add config/alpha/alpha-osf2.mh. * alpha-nat.c (supply_gregset, fill_gregset, supply_fpgregset, fill_fpgregset): New routines for procfs support. * inftarg.c (_initialize_inftarg): Don't add ptrace support if we have an optional procfs and /proc is accessible. * procfs.c: Include sys/fault.h and sys/syscall.h before including sys/procfs.h. (unconditionally_kill_inferior): If PROCFS_NEED_PIOCSSIG_FOR_KILL is defined, additionally perform a PIOCSSIG to really terminate the inferior. (create_procinfo): Always return a result. (create_procinfo, do_attach): Don't trace T_IFAULT faults if PROCFS_DONT_TRACE_IFAULT is defined. (procfs_init_inferior): Use START_INFERIOR_TRAPS_EXPECTED as argument to startup_inferior if it is defined. (proc_set_exec_trap): If PIOCSSPCACT is defined, use it instead of tracing exits from exec system calls. Needed for the user level loader under Alpha OSF/1. (do_detach): Clear any pending signal if we want to detach from a process without a signal. (set_proc_siginfo): If PROCFS_DONT_PIOCSSIG_CURSIG is defined, don't issue a PIOCSSIG if pr_cursig already contains the signal we intend to set. (info_proc_signals): If PROCFS_SIGPEND_OFFSET is defined, the pending signals are numbered from 1 instead of 0. (info_proc_mappings): Increase size of output format for addresses if BFD_HOST_64_BIT is defined. (procfs_stop): Renamed from child_stop. (_initialize_procfs): Don't add procfs support if we have an optional procfs and /proc is not accessible.
1995-01-12 18:12:04 +00:00
config/alpha/alpha-osf1.mh config/alpha/alpha-osf2.mh \
config/alpha/alpha-osf1.mt config/alpha/alpha-nw.mt \
1993-06-23 22:59:35 +00:00
config/arm/arm.mh config/arm/arm.mt config/convex/convex.mh \
config/convex/convex.mt config/gould/np1.mh config/gould/np1.mt \
config/gould/pn.mh config/gould/pn.mt config/h8300/h8300hms.mt \
config/h8500/h8500hms.mt config/i386/go32.mh config/i386/i386aix.mh \
config/i386/i386aix.mt config/i386/i386aout.mt config/i386/i386bsd.mh \
config/i386/i386bsd.mt config/i386/i386lynx.mh \
config/i386/i386lynx.mt config/i386/i386m3.mh config/i386/i386m3.mt \
config/i386/i386mach.mh config/i386/i386mk.mh config/i386/i386mk.mt \
config/i386/i386nw.mt config/i386/i386sco.mh \
config/i386/i386sco4.mh \
1993-06-23 22:59:35 +00:00
config/i386/i386sol2.mh config/i386/i386sol2.mt config/i386/i386v.mh \
config/i386/i386v.mt config/i386/i386v32.mh config/i386/i386v4.mh \
config/i386/i386v4.mt config/i386/linux.mh config/i386/linux.mt \
config/i386/ncr3000.mh config/i386/ncr3000.mt config/i386/ptx.mh \
config/i386/sun386.mh \
1993-06-23 22:59:35 +00:00
config/i386/sun386.mt config/i386/symmetry.mh config/i386/symmetry.mt \
config/i386/win32.mh config/i386/win32.mt \
config/i960/mon960.mt \
1993-06-23 22:59:35 +00:00
config/i960/nindy960.mt config/i960/vxworks960.mt config/m68k/3b1.mh \
config/m68k/3b1.mt config/m68k/altos.mh config/m68k/altos.mt \
config/m68k/amix.mh config/m68k/amix.mt config/m68k/apollo68b.mh \
config/m68k/apollo68b.mt \
gcc -Wall lint: * breakpoint.c (watchpoint_check): Remove unused variable b. * stack.c (print_frame_info): Move sp and buf inside #if. * eval.c (evaluate_subexp): Remove unused variables pp, mangle_ptr, ptr, and mangle_tstr. * valarith.c (value_x_binop): Remove unused variables mangle_tstr and mangle_ptr. * symtab.c (lookup_symtab): Put variable copy inside #if. (decode_line_1): Put variable q1 inside #if 0. * target.h: Declare target_link. * infrun.c (wait_for_inferior): Remove unused variables signame. * remote.c (remote_resume): Remove unused variable name. * c-exp.y (parse_number): Parenthesize operand of shift. * dbxread.c (record_minimal_symbol): Parenthesize operand of && (this is a semantic change, the warning seems to have detected a bug). * dbxread.c (end_psymtab): Move variable p1 inside #if. * coffread.c: Move variable temptype inside #if. * ch-typeprint.c (chill_type_print_base): Remove unused variable name. * ch-valprint.c: #include typeprint.h and ch-lang.h. (chill_val_print): Remove unused variable in_range. (chill_val_print): Remove statement "length > TYPE_LENGTH (type);". (chill_val_print): Add default case for switch. * stabsread.h: Declare stabsect_build_psymtabs. * os9kread.c (read_minimal_symbols): Make this return void. (os9k_symfile_read): Remove unused variables stb_exist and val. (os9k_symfile_init): Remove unused variable val. (fill_sym): Remove unused variable id. (read_os9k_psymtab): Put variable back_to inside #if 0. Remove unused variable nsl. Remove unused variable symfile_bfd. #if 0 unused variables lbrac_unmatched_complaint and lbrac_mismatch_complaint. Remove declaration for non-existent function os9k_next_symbol_text. * annotate.c, annotate.h: New files, containing a function for each annotation which outputs it. * Move breakpoints_changed from breakpoint.c to annotate.c. * breakpoint.c, blockframe.c, infrun.c, cp-valprint.c, main.c, printcmd.c, source.c, stack.c, utils.c, valprint.c: Use annotate.c functions to output annotations. * Makefile.in (OBS): Add annotate.o.
1994-05-13 18:18:57 +00:00
config/m68k/apollo68v.mh \
config/m68k/cisco.mt config/m68k/delta68.mh \
config/m68k/delta68.mt config/m68k/dpx2.mh config/m68k/dpx2.mt \
config/m68k/es1800.mt config/m68k/hp300bsd.mh \
1993-06-23 22:59:35 +00:00
config/m68k/hp300bsd.mt config/m68k/hp300hpux.mh \
config/m68k/hp300hpux.mt config/m68k/isi.mh config/m68k/isi.mt \
config/m68k/m68klynx.mh config/m68k/m68klynx.mt \
config/m68k/monitor.mt \
1993-06-23 22:59:35 +00:00
config/m68k/news.mh config/m68k/news.mt config/m68k/news1000.mh \
config/m68k/os68k.mt config/m68k/st2000.mt config/m68k/sun2os3.mh \
config/m68k/sun2os3.mt config/m68k/sun2os4.mh config/m68k/sun2os4.mt \
config/m68k/sun3os3.mh config/m68k/sun3os3.mt config/m68k/sun3os4.mh \
config/m68k/sun3os4.mt config/m68k/vxworks68.mt config/m88k/delta88.mh \
config/m88k/delta88.mt config/m88k/delta88v4.mh \
config/m88k/delta88v4.mt config/m88k/m88k.mh config/m88k/m88k.mt \
config/mips/bigmips.mt config/mips/bigmips64.mt \
config/mips/decstation.mh \
1993-06-23 22:59:35 +00:00
config/mips/decstation.mt config/mips/idt.mt config/mips/idtl.mt \
config/mips/idt64.mt config/mips/idtl64.mt \
1993-06-23 22:59:35 +00:00
config/mips/irix3.mh config/mips/irix3.mt config/mips/irix4.mh \
config/mips/irix5.mh config/mips/irix5.mt \
1993-06-23 22:59:35 +00:00
config/mips/littlemips.mh config/mips/littlemips.mt \
config/mips/mipsel64.mt \
config/mips/mipsm3.mh config/mips/mipsm3.mt \
gcc -Wall lint: * breakpoint.c (watchpoint_check): Remove unused variable b. * stack.c (print_frame_info): Move sp and buf inside #if. * eval.c (evaluate_subexp): Remove unused variables pp, mangle_ptr, ptr, and mangle_tstr. * valarith.c (value_x_binop): Remove unused variables mangle_tstr and mangle_ptr. * symtab.c (lookup_symtab): Put variable copy inside #if. (decode_line_1): Put variable q1 inside #if 0. * target.h: Declare target_link. * infrun.c (wait_for_inferior): Remove unused variables signame. * remote.c (remote_resume): Remove unused variable name. * c-exp.y (parse_number): Parenthesize operand of shift. * dbxread.c (record_minimal_symbol): Parenthesize operand of && (this is a semantic change, the warning seems to have detected a bug). * dbxread.c (end_psymtab): Move variable p1 inside #if. * coffread.c: Move variable temptype inside #if. * ch-typeprint.c (chill_type_print_base): Remove unused variable name. * ch-valprint.c: #include typeprint.h and ch-lang.h. (chill_val_print): Remove unused variable in_range. (chill_val_print): Remove statement "length > TYPE_LENGTH (type);". (chill_val_print): Add default case for switch. * stabsread.h: Declare stabsect_build_psymtabs. * os9kread.c (read_minimal_symbols): Make this return void. (os9k_symfile_read): Remove unused variables stb_exist and val. (os9k_symfile_init): Remove unused variable val. (fill_sym): Remove unused variable id. (read_os9k_psymtab): Put variable back_to inside #if 0. Remove unused variable nsl. Remove unused variable symfile_bfd. #if 0 unused variables lbrac_unmatched_complaint and lbrac_mismatch_complaint. Remove declaration for non-existent function os9k_next_symbol_text. * annotate.c, annotate.h: New files, containing a function for each annotation which outputs it. * Move breakpoints_changed from breakpoint.c to annotate.c. * breakpoint.c, blockframe.c, infrun.c, cp-valprint.c, main.c, printcmd.c, source.c, stack.c, utils.c, valprint.c: Use annotate.c functions to output annotations. * Makefile.in (OBS): Add annotate.o.
1994-05-13 18:18:57 +00:00
config/mips/mipsv4.mh config/mips/mipsv4.mt \
config/mips/news-mips.mh config/mips/riscos.mh \
1993-06-23 22:59:35 +00:00
config/none/none.mh config/none/none.mt config/ns32k/merlin.mh \
config/ns32k/merlin.mt config/ns32k/ns32km3.mh config/ns32k/ns32km3.mt \
config/ns32k/umax.mh config/ns32k/umax.mt \
1993-06-23 22:59:35 +00:00
config/pa/hppabsd.mh config/pa/hppabsd.mt config/pa/hppahpux.mh \
config/pa/hppahpux.mt config/pyr/pyramid.mh config/pyr/pyramid.mt \
config/romp/rtbsd.mh config/rs6000/rs6000.mh config/rs6000/rs6000.mt \
config/sh/sh.mt config/sparc/sparc-em.mt config/sparc/sparclite.mt \
config/sparc/sparclynx.mh config/sparc/sparclynx.mt \
1993-06-23 22:59:35 +00:00
config/sparc/sun4os4.mh config/sparc/sun4os4.mt \
config/sparc/sun4sol2.mh config/sparc/sun4sol2.mt \
config/sparc/vxsparc.mt config/tahoe/tahoe.mh config/tahoe/tahoe.mt \
config/vax/vax.mt config/vax/vaxbsd.mh config/vax/vaxult.mh \
config/vax/vaxult2.mh config/z8k/z8ksim.mt
udip2soc.o: $(srcdir)/29k-share/udi/udip2soc.c $(udiheaders)
1993-06-23 22:59:35 +00:00
$(CC) -c $(INTERNAL_CFLAGS) $(srcdir)/29k-share/udi/udip2soc.c
udi2go32.o: $(srcdir)/29k-share/udi/udi2go32.c $(udiheaders)
$(CC) -c $(INTERNAL_CFLAGS) $(srcdir)/29k-share/udi/udi2go32.c
udr.o: $(srcdir)/29k-share/udi/udr.c $(udiheaders)
1993-06-23 22:59:35 +00:00
$(CC) -c $(INTERNAL_CFLAGS) $(srcdir)/29k-share/udi/udr.c
a29k-tdep.o: a29k-tdep.c $(gdbcmd_h) $(gdbcore_h) $(inferior_h) $(defs_h)
1993-06-23 22:59:35 +00:00
a68v-nat.o: a68v-nat.c $(defs_h) $(gdbcore_h) $(inferior_h)
Changes to support alpha OSF/1 in native mode. * alpha-nat.c, alpha-tdep.c, config/alpha/alpha-osf1.mt, config/alpha/nm-alpha.h, config/alpha/tm-alpha.h, osfsolib.c: New files. * Makefile.in: Add new files and dependencies. * configure.in: Add alpha target. * config/alpha/alpha-osf1.mh (NATDEPFILES): Add osfsolib.o * config/alpha/alpha-osf1.mh (MH_CFLAGS): Remove, we can handle shared libraries now. * config/alpha/xm-alpha.h: Cleanup, get MAKEVA_* defines right. * defs.h (CORE_ADDR): Make its type overridable via CORE_ADDR_TYPE, provide `unsigned int' default. * breakpoint.c (breakpoint_auto_delete): Delete only if we really stopped for the breakpoint. * stabsread.c, stabsread.h (define_symbol): Change valu parameter to a CORE_ADDR. * stabsread.c (read_range_type): Handle the case where the lower bound overflows and the upper doesn't and the range is legal. * infrun.c (resume): Do not step a breakpoint instruction if CANNOT_STEP_BREAKPOINT is defined. * inferior.h (CALL_DUMMY_LOCATION): New variant AT_ENTRY_POINT. Now that we have the bp_call_dummy breakpoint the call dummy code is no longer needed. PUSH_DUMMY_FRAME, PUSH_ARGUMENTS and FIX_CALL_DUMMY can be used to set up everything for the dummy. The breakpoint for the dummy is set at the entry point and thats it. * blockframe.c (inside_entry_file, inside_entry_func): Do not stop backtraces if pc is in the call dummy at the entry point. * infcmd.c (run_stack_dummy): Handle AT_ENTRY_POINT case. Use the expected breakpoint pc when setting up the frame for set_momentary_breakpoint. * symfile.c (entry_point_address): New function for AT_ENTRY_POINT support. * valops.c (call_function_by_hand): Handle AT_ENTRY_POINT case.
1993-10-05 19:44:57 +00:00
alpha-nat.o: alpha-nat.c $(defs_h) $(gdbcore_h) $(inferior_h) target.h
alpha-tdep.o: alpha-tdep.c $(defs_h) $(gdbcmd_h) $(gdbcore_h) \
$(inferior_h) $(symtab_h) $(dis-asm.h) gdb_string.h
Changes to support alpha OSF/1 in native mode. * alpha-nat.c, alpha-tdep.c, config/alpha/alpha-osf1.mt, config/alpha/nm-alpha.h, config/alpha/tm-alpha.h, osfsolib.c: New files. * Makefile.in: Add new files and dependencies. * configure.in: Add alpha target. * config/alpha/alpha-osf1.mh (NATDEPFILES): Add osfsolib.o * config/alpha/alpha-osf1.mh (MH_CFLAGS): Remove, we can handle shared libraries now. * config/alpha/xm-alpha.h: Cleanup, get MAKEVA_* defines right. * defs.h (CORE_ADDR): Make its type overridable via CORE_ADDR_TYPE, provide `unsigned int' default. * breakpoint.c (breakpoint_auto_delete): Delete only if we really stopped for the breakpoint. * stabsread.c, stabsread.h (define_symbol): Change valu parameter to a CORE_ADDR. * stabsread.c (read_range_type): Handle the case where the lower bound overflows and the upper doesn't and the range is legal. * infrun.c (resume): Do not step a breakpoint instruction if CANNOT_STEP_BREAKPOINT is defined. * inferior.h (CALL_DUMMY_LOCATION): New variant AT_ENTRY_POINT. Now that we have the bp_call_dummy breakpoint the call dummy code is no longer needed. PUSH_DUMMY_FRAME, PUSH_ARGUMENTS and FIX_CALL_DUMMY can be used to set up everything for the dummy. The breakpoint for the dummy is set at the entry point and thats it. * blockframe.c (inside_entry_file, inside_entry_func): Do not stop backtraces if pc is in the call dummy at the entry point. * infcmd.c (run_stack_dummy): Handle AT_ENTRY_POINT case. Use the expected breakpoint pc when setting up the frame for set_momentary_breakpoint. * symfile.c (entry_point_address): New function for AT_ENTRY_POINT support. * valops.c (call_function_by_hand): Handle AT_ENTRY_POINT case.
1993-10-05 19:44:57 +00:00
1993-06-23 22:59:35 +00:00
altos-xdep.o: altos-xdep.c $(defs_h) $(gdbcore_h) $(inferior_h)
annotate.o: annotate.c $(defs_h) annotate.h $(value_h) target.h $(gdbtypes_h)
arm-tdep.o: arm-tdep.c $(gdbcmd_h) $(gdbcore_h) $(inferior_h) $(defs_h) \
$(gdbcore_h)
1993-06-23 22:59:35 +00:00
* bcache.c, bcache.h: New files to implement a byte cache. * Makefile.in (SFILES): Add bcache.c. (symtab_h): Add bcache.h. (HFILES_NO_SRCDIR): add bcache.h (COMMON_OBJS): Add bcache.o (bcache.o): New target. * dbxread.c (start_psymtab): Make global_syms & static_syms type "partial_symbol **". * hpread.c (hpread_start_symtab): Ditto. * os9kread.c (os9k_start_psymtab): Ditto. * stabsread.h (start_psymtab): Ditto. * {symfile.c, symfile.h} (start_psymtab_common): Ditto. * maint.c (maintenance_print_statistics): Call print_symbol_bcache_statistics. * objfiles.c (allocate_objfile): Initialize psymbol bcache malloc and free pointers. * solib.c (allocate_rt_common_objfile): Ditto. * symfile.c (reread_symbols): Ditto. (free_objfile): Free psymbol bcache when objfile is freed. (objfile_relocate): Use new indirect psymbol pointers. * objfiles.h (struct objfile): Add psymbol cache. * symfile.c (compare_psymbols): Now passed pointers to pointers to psymbols. (reread_symbols): Free psymbol bcache when freeing other objfile resources. (add_psymbol_to_list, add_psymbol_addr_to_list): Initialize new psymbol using the psymbol bcache. (init_psymbol_list): Psymbol lists now contain pointers rather than the actual psymbols. * symfile.h (psymbol_allocation_list): Psymbol lists now dynamically grown arrays of pointers. (ADD_PSYMBOL_VT_TO_LIST): Initialize new symbol using the psymbol bcache. * symmisc.c (print_partial_symbols): Now takes pointer to pointer to partial symbol. (print_symbol_bcache_statistics): New function to print per objfile bcache statistics. (print_partial_symbol, print_partial_symbols, maintenance_check_symtabs, extend_psymbol_list): Account for change to pointer to pointer to partial symbol. * symtab.c (find_pc_psymbol, lookup_partial_symbol, decode_line_2, make_symbol_completion_list): Account for change to pointer to pointer to partial symbol. * symtab.h (bcache.h): Include. * xcoffread.c (xcoff_start_psymtab): Make global_syms & static_syms type "partial_symbol **".
1996-02-16 22:14:47 +00:00
bcache.o: bcache.c bcache.h $(defs_h)
1993-06-23 22:59:35 +00:00
blockframe.o: blockframe.c $(defs_h) $(gdbcore_h) $(inferior_h) \
objfiles.h symfile.h target.h
breakpoint.o: breakpoint.c $(defs_h) $(gdbcmd_h) $(gdbcore_h) \
$(inferior_h) language.h target.h gdbthread.h gdb_string.h
1993-06-23 22:59:35 +00:00
buildsym.o: buildsym.c $(bfd_h) buildsym.h complaints.h $(defs_h) \
objfiles.h symfile.h $(symtab_h) gdb_string.h
1993-06-23 22:59:35 +00:00
Thu Sep 28 14:32:11 1995 steve chamberlain <sac@slash.cygnus.com> * callback.[ch]: New files. * remote-rdp.c: Support for the ARM RDP monitor. * Makefile: Update. * arm-tdep.c (arm_othernames): New. (_initialize_arm_tdep): install 'othernames' command. (arm_nullified_insn, shifted_reg_val, arm_get_next_pc): New. * configure.in: Check for termios.h, termio.h and sgtty.h. (i[345]86-*-win32*): New host. * configure: Regenerated. * inflow.c: Clean up inclusions. * main.c (main): Check for WINGDB, not WIN32. * printcmd.c (do_examine): Put QUIT test in loop. * remote-hms.c (e7000_load): Delete. (hms_ops): Point to generic_load instead. * remote-hms.c (hms_ops): Point to generic_load. * remote-sim.c (sim_callback_write_stdout): Becomes gdbsim_write_stdout. (gdbsim_load): Call generic_load. * remote-utils.c (gr_load_image): Delete. * ser-unix.c (terminal.h): Include instead of havig own #if tree. (hardwire_flush_input): Reset input buffer too. * source.c (openp): If WIN32 then open file in binary mode. * terminal.h: Configure IO mechanism using autoconf defines if available and not overriden. * utils.c (quit, pollquit, notice_quit): WIN32 check becomes WINGDB check. * config/arm/arm.mt (TDEPFILES): Add remote-rdp.o * config/arm/tm-arm.h (TARGET_BYTE_ORDER): becomes TARGET_BYTE_ORDER_SELECTABLE. (ADDR_BITS_REMOVE): New. (ORIGINAL_REGISTER_NAMES, ADDITIONAL_REGISTER_NAMES): New. (INST_xx): New (FRAME_FIND_SAVED_REGS): Pass the right argument. (arm_get_next_pc): Declare. * mswin/prebuilt/*/bfdtarget.h (SELECT_ARCHITECTURES): Need leading &.
1995-09-29 00:14:01 +00:00
callback.o: callback.c $(defs_h) callback.h
1993-06-23 22:59:35 +00:00
c-lang.o: c-lang.c c-lang.h $(defs_h) $(expression_h) $(gdbtypes_h) \
language.h parser-defs.h $(symtab_h)
c-typeprint.o: c-typeprint.c c-lang.h $(defs_h) $(expression_h) \
$(gdbcmd_h) $(gdbcore_h) $(gdbtypes_h) language.h $(symtab_h) \
target.h typeprint.h $(value_h) gdb_string.h
1993-06-23 22:59:35 +00:00
c-valprint.o: c-valprint.c $(defs_h) $(expression_h) $(gdbtypes_h) \
language.h $(symtab_h) valprint.h $(value_h)
f-lang.o: f-lang.c f-lang.h $(defs_h) $(expression_h) $(gdbtypes_h) \
language.h parser-defs.h $(symtab_h) gdb_string.h
f-typeprint.o: f-typeprint.c f-lang.h $(defs_h) $(expression_h) \
$(gdbcmd_h) $(gdbcore_h) $(gdbtypes_h) language.h $(symtab_h) \
target.h typeprint.h $(value_h) gdb_string.h
f-valprint.o: f-valprint.c $(defs_h) $(expression_h) $(gdbtypes_h) \
language.h $(symtab_h) valprint.h $(value_h) gdb_string.h
ch-exp.o: ch-exp.c ch-lang.h $(defs_h) language.h parser-defs.h $(bfd_h) symfile.h objfiles.h $(value_h)
1993-06-23 22:59:35 +00:00
ch-lang.o: ch-lang.c ch-lang.h $(defs_h) $(expression_h) $(gdbtypes_h) \
language.h parser-defs.h $(symtab_h)
ch-typeprint.o: ch-typeprint.c ch-lang.h $(defs_h) $(expression_h) \
$(gdbcmd_h) $(gdbcore_h) $(gdbtypes_h) language.h $(symtab_h) \
target.h $(value_h) typeprint.h gdb_string.h
1993-06-23 22:59:35 +00:00
ch-valprint.o: ch-valprint.c $(defs_h) $(expression_h) $(gdbtypes_h) \
language.h $(symtab_h) valprint.h $(value_h) c-lang.h
1993-06-23 22:59:35 +00:00
coff-solib.o: coff-solib.c $(defs_h)
1993-06-23 22:59:35 +00:00
coffread.o: coffread.c $(bfd_h) $(breakpoint_h) buildsym.h \
complaints.h $(defs_h) $(expression_h) $(gdbtypes_h) objfiles.h \
symfile.h $(symtab_h) gdb-stabs.h stabsread.h target.h \
gdb_string.h
1993-06-23 22:59:35 +00:00
command.o: command.c $(defs_h) $(expression_h) $(gdbcmd_h) \
* core-aout.c (fetch_core_registers): Cast core_reg_size to int before testing against reg_ptr. * eval.c (evaluate_subexp_standard): Cast type of TYPE_FN_FIELD_VOFFSET to int. * findvar.c (extract_signed_integer, extract_unsigned_integer, extract_long_unsigned_integer): Cast type of sizeof to int. * values.c (unpack_field_as_long, modify_field): Ditto. * valops.c (value_assign, call_function_by_hand): Ditto. * infcmd.c (do_registers_info): Ditto. * ser-tcp.c (tcp_open): Ditto * remote.c (putpkt): Ditto. * dcache.c (dcache_peek): Ditto. * dcache.c (dcache_poke): Ditto. * m2-exp.y (yylex): Ditto. * gnu-regex.c (re_match_2): Ditto. * f-lang.c (ADD_BF_SYMNUM, saved_bf_list_end, tmp_bf_ptr): Ifdef out unused macro definition and variables. * inftarg.c (proc_wait): Move from main.c to here, and make static. * valprint.c (val_print_string): Change bufsize from int to unsigned. * main.c (wait.h): Include * top.c (command_line_input): Remove unused variable "c". * f-typeprint.c (f_type_print_varspec_prefix): Add missing enum value TYPE_CODE_TYPEDEF to switch statement. (f_type_print_varspec_suffix): Add missing enum value TYPE_CODE_TYPEDEF to switch statement. * ch-exp.c (parse_primval): Add remaining enumeration values to switch statement, with no specific action. (ch_lex): Add LOC_UNRESOLVED in switch statement. (pushback_token): Ifdef out, since code using it is ifdef'd out. * stabsread.c (cleanup_undefined_types): Remove unused label "badtype". * objfiles.h (print_symbol_bcache_statistics): Add prototype. * maint.c (objfiles.h): Include. (maintenance_print_statistics): Remove unused variable "temp". * minsyms.c (lookup_minimal_symbol_solib_trampoline): Remove unused variable "found_file_symbol". * m2-exp.y (yylex): Add LOC_UNRESOLVED case to switch. * language.c (lang_bool_type): Use existing function local type variable rather than create block local variables. * solib.c (disable_break): Enclose in ifndef SVR4_SHARED_LIBS. * infptrace.c (wait.h, command.h): Include. * ser-tcp.c (gdb_string.h): Include * i386-tdep.c (codestream_seek): Change "place" to CORE_ADDR. (i386_get_frame_setup): Change "pc" from int to CORE_ADDR. * command.c (complete_on_enum): Make assignment used as truth value explictly check against NULL. (wait.h): Include. * infrun.c (wait_for_inferior): Ifdef out prologue_pc since code that uses it is ifdef'd out. * parser-defs.h: Add prototype for write_dollar_variable. * infrun.c: Add prototype for write_pc_pid. * breakpoint.h: Add prototype for re_enable_breakpoints_in_shlibs. * symmisc.c (bcache.h): Include. * bcache.h: Add prototype for print_bcache_statistics. * symfile.c: Include <time.h>. * printcmd.c (print_scalar_formatted): Change len to unsigned int. * valarith.c (value_equal): Cast result of TYPE_LENGTH to int. * valarith.c (value_binop): Change result_len, promoted_len1, and promoted_len2 to unsigned int. * valarith.c (value_subscripted_rvalue): Change elt_offs and elt_size to unsigned int. * valops.c (value_array): Change typelength to unsigned int. (destructor_name_p): Change len to unsigned int. * scm-lang.h (scm_parse): Add prototype for scm_unpack. * symfile.c (decrement_reading_symtab): Change return type to void. * valarith.c (value_subscript): Remove unused variable "word". (value_subscript): Remove unused variable "tint". * valops.c (auto_abandon): Ifdef out, since code using it is also ifdef'd out. * eval.c (init_array_element): Remove unused variable "val". * Makefile.in (values.o): Depends on scm-lang.h. (command.o): Depends upon wait_h. (ser-tcp.o): Depends upon gdb_string.h. (infptrace.o): Depends upon wait_h and command_h. (maint.o): Depends on objfiles.h and symfile.h. * values.c (allocate_repeat_value): Remove unused variable "element_type". (scm-lang.h): Include. * breakpoint.c (create_longjmp_breakpoint): Enclose in GET_LONGJMP_TARGET define, unused otherwise. * config/i386/nm-linux.h: Add prototypes for i386_insert_watchpoint, i386_remove_watchpoint and i386_stopped_by_watchpoint.
1996-03-30 05:45:10 +00:00
$(gdbtypes_h) $(symtab_h) $(value_h) gdb_string.h $(wait_h)
1993-06-23 22:59:35 +00:00
complaints.o: complaints.c complaints.h $(defs_h) $(gdbcmd_h)
convex-tdep.o: convex-tdep.c $(wait_h) $(defs_h) $(gdbcmd_h) \
$(gdbcore_h) $(inferior_h)
convex-xdep.o: convex-xdep.c $(defs_h) $(gdbcmd_h) $(gdbcore_h) \
$(inferior_h)
copying.o: copying.c $(defs_h) $(gdbcmd_h)
* coredep.c: Renamed to core-aout.c * core-svr4.c: Renamed to core-regset.c * Makefile.in (ALLDEPFILES): Account for renamings. * corelow.c (core_file_fns): Add, points to chain of structs. (add_core_fns): New function to build chain of structs. (get_core_registers): Modify to search core functions chain and call appropriate fetch_core_registers function based on core file flavour. * gdbcore.h (fetch_core_registers): Remove declaration. (struct core_fns): Define struct for core function info. * i386m3-nat.c: Update comment for filename change (coredep->core-aout) * a68v-nat.c (fetch_core_registers): Remove stub, not needed now. * alpha-nat.c (fetch_core_registers): Make static. (alpha_core_fns, _initialize_core_alpha): New struct and func. * core-aout.c (fetch_core_registers): Make static (aout_core_fns, _initialize_core_aout): New struct and func. * core-regset.c (fetch_core_registers): Make static. (regset_core_fns, _initialize_core_regset): New struct and func. * core-sol2.c (fetch_core_registers): Make static. (solaris_core_fns, _initialize_core_solaris): New struct and func. * hp300ux-nat.c (fetch_core_registers): Make static. (hp300ux_core_fns, _initialize_core_hp300ux): New struct and func. * i386aix-nat.c (fetch_core_registers): Make static. (i386aix_core_fns, _initialize_core_i386aix): New struct and func. * i386mach-nat.c (fetch_core_registers: Make static. (i386mach_core_fns, _initialize_core_i386mach): New struct and func. * irix4-nat.c (fetch_core_registers): Make static. (irix4_core_fns, _initialize_core_irix4): New struct and func. * irix5-nat.c (fetch_core_registers): (irix5_core_fns, _initialize_core_irix5): New struct and func. * lynx-nat.c (fetch_core_registers): Make static. (lynx_core_fns, _initialize_core_lynx): New struct and func. * mips-nat.c (fetch_core_registers): Make static. (mips_core_fns, _initialize_core_mips): New struct and func. * ns32km3-nat.c (fetch_core_registers): Remove stub. * rs6000-nat.c (fetch_core_registers): Make static. (rs6000_core_fns, _initialize_core_rs6000): New struct and func. * sparc-nat.c (fetch_core_registers): Make static. (sparc_core_fns, _initialize_core_sparc): New struct and func. * sun3-nat.c (fetch_core_registers): (sun3_core_fns, _initialize_core_sun3): New struct and func. * sun386-nat.c (fetch_core_registers): Remove stub. * ultra3-nat.c (fetch_core_registers): Make static. (ultra3_core_fns, _initialize_core_ultra3): New struct and func. * config/gould/pn.mh (XDEPFILES), config/i386/fbsd.mh (NATDEPFILES), config/i386/i386bsd.mh (NATDEPFILES), config/i386/i386m3.mh (XDEPFILES), config/i386/i386sco.mh (NATDEPFILES), config/i386/i386sco4.mh (NATDEPFILES), config/i386/i386v.mh (NATDEPFILES), config/i386/i386v32.mh (NATDEPFILES), config/i386/nbsd.mh (NATDEPFILES), config/i386/ptx.mh (XDEPFILES), config/i386/ptx4.mh (XDEPFILES), config/i386/symmetry.mh (NATDEPFILES), config/m68k/3b1.mh (XDEPFILES), config/m68k/cisco.mt (TDEPFILES), config/m68k/delta68.mh (NATDEPFILES), config/m68k/dpx2.mh (NATDEPFILES), config/m68k/hp300bsd.mh (NATDEPFILES), config/m68k/hp300hpux.mh (NATDEPFILES), config/m68k/isi.mh (XDEPFILES), config/m68k/news.mh (NATDEPFILES), config/m68k/news1000.mh (XDEPFILES), config/m88k/cxux.mh (NATDEPFILES), config/m88k/delta88.mh (NATDEPFILES), config/mips/littlemips.mh (XDEPFILES), config/mips/mipsm3.mh (XDEPFILES), config/ns32k/merlin.mh (XDEPFILES), config/ns32k/nbsd.mh (NATDEPFILES), config/ns32k/ns32km3.mh (NATDEPFILES), config/pa/hppabsd.mh (NATDEPFILES), config/pa/hppahpux.mh (NATDEPFILES), config/romp/rtbsd.mh (XDEPFILES), config/tahoe/tahoe.mh (XDEPFILES), config/vax/vaxbsd.mh (XDEPFILES), config/vax/vaxult.mh (NATDEPFILES), config/vax/vaxult2.mh (NATDEPFILES), Account for coredep.o to core-aout.o name change. * config/i386/i386dgux (NATDEPFILES), config/i386/i386sol2.mh (NATDEPFILES), config/i386/i386v4.mh (NATDEPFILES), config/i386/linux.mh (NATDEPFILES), config/i386/ncr3000.mh (NATDEPFILES), config/m68k/m68kv4.mh (NATDEPFILES), config/m88k/delta88v4.mh (NATDEPFILES), config/mips/mipsv4.mh (NATDEPFILES), Account for core-svr4.o to core-regset.o name change.
1996-01-11 20:08:15 +00:00
core-aout.o: core-aout.c $(defs_h) $(gdbcore_h) $(value_h) $(inferior_h)
core-sol2.o: core-sol2.c $(command_h) $(defs_h) $(gdbcore_h) \
$(inferior_h) target.h gdb_string.h
* coredep.c: Renamed to core-aout.c * core-svr4.c: Renamed to core-regset.c * Makefile.in (ALLDEPFILES): Account for renamings. * corelow.c (core_file_fns): Add, points to chain of structs. (add_core_fns): New function to build chain of structs. (get_core_registers): Modify to search core functions chain and call appropriate fetch_core_registers function based on core file flavour. * gdbcore.h (fetch_core_registers): Remove declaration. (struct core_fns): Define struct for core function info. * i386m3-nat.c: Update comment for filename change (coredep->core-aout) * a68v-nat.c (fetch_core_registers): Remove stub, not needed now. * alpha-nat.c (fetch_core_registers): Make static. (alpha_core_fns, _initialize_core_alpha): New struct and func. * core-aout.c (fetch_core_registers): Make static (aout_core_fns, _initialize_core_aout): New struct and func. * core-regset.c (fetch_core_registers): Make static. (regset_core_fns, _initialize_core_regset): New struct and func. * core-sol2.c (fetch_core_registers): Make static. (solaris_core_fns, _initialize_core_solaris): New struct and func. * hp300ux-nat.c (fetch_core_registers): Make static. (hp300ux_core_fns, _initialize_core_hp300ux): New struct and func. * i386aix-nat.c (fetch_core_registers): Make static. (i386aix_core_fns, _initialize_core_i386aix): New struct and func. * i386mach-nat.c (fetch_core_registers: Make static. (i386mach_core_fns, _initialize_core_i386mach): New struct and func. * irix4-nat.c (fetch_core_registers): Make static. (irix4_core_fns, _initialize_core_irix4): New struct and func. * irix5-nat.c (fetch_core_registers): (irix5_core_fns, _initialize_core_irix5): New struct and func. * lynx-nat.c (fetch_core_registers): Make static. (lynx_core_fns, _initialize_core_lynx): New struct and func. * mips-nat.c (fetch_core_registers): Make static. (mips_core_fns, _initialize_core_mips): New struct and func. * ns32km3-nat.c (fetch_core_registers): Remove stub. * rs6000-nat.c (fetch_core_registers): Make static. (rs6000_core_fns, _initialize_core_rs6000): New struct and func. * sparc-nat.c (fetch_core_registers): Make static. (sparc_core_fns, _initialize_core_sparc): New struct and func. * sun3-nat.c (fetch_core_registers): (sun3_core_fns, _initialize_core_sun3): New struct and func. * sun386-nat.c (fetch_core_registers): Remove stub. * ultra3-nat.c (fetch_core_registers): Make static. (ultra3_core_fns, _initialize_core_ultra3): New struct and func. * config/gould/pn.mh (XDEPFILES), config/i386/fbsd.mh (NATDEPFILES), config/i386/i386bsd.mh (NATDEPFILES), config/i386/i386m3.mh (XDEPFILES), config/i386/i386sco.mh (NATDEPFILES), config/i386/i386sco4.mh (NATDEPFILES), config/i386/i386v.mh (NATDEPFILES), config/i386/i386v32.mh (NATDEPFILES), config/i386/nbsd.mh (NATDEPFILES), config/i386/ptx.mh (XDEPFILES), config/i386/ptx4.mh (XDEPFILES), config/i386/symmetry.mh (NATDEPFILES), config/m68k/3b1.mh (XDEPFILES), config/m68k/cisco.mt (TDEPFILES), config/m68k/delta68.mh (NATDEPFILES), config/m68k/dpx2.mh (NATDEPFILES), config/m68k/hp300bsd.mh (NATDEPFILES), config/m68k/hp300hpux.mh (NATDEPFILES), config/m68k/isi.mh (XDEPFILES), config/m68k/news.mh (NATDEPFILES), config/m68k/news1000.mh (XDEPFILES), config/m88k/cxux.mh (NATDEPFILES), config/m88k/delta88.mh (NATDEPFILES), config/mips/littlemips.mh (XDEPFILES), config/mips/mipsm3.mh (XDEPFILES), config/ns32k/merlin.mh (XDEPFILES), config/ns32k/nbsd.mh (NATDEPFILES), config/ns32k/ns32km3.mh (NATDEPFILES), config/pa/hppabsd.mh (NATDEPFILES), config/pa/hppahpux.mh (NATDEPFILES), config/romp/rtbsd.mh (XDEPFILES), config/tahoe/tahoe.mh (XDEPFILES), config/vax/vaxbsd.mh (XDEPFILES), config/vax/vaxult.mh (NATDEPFILES), config/vax/vaxult2.mh (NATDEPFILES), Account for coredep.o to core-aout.o name change. * config/i386/i386dgux (NATDEPFILES), config/i386/i386sol2.mh (NATDEPFILES), config/i386/i386v4.mh (NATDEPFILES), config/i386/linux.mh (NATDEPFILES), config/i386/ncr3000.mh (NATDEPFILES), config/m68k/m68kv4.mh (NATDEPFILES), config/m88k/delta88v4.mh (NATDEPFILES), config/mips/mipsv4.mh (NATDEPFILES), Account for core-svr4.o to core-regset.o name change.
1996-01-11 20:08:15 +00:00
core-regset.o: core-regset.c $(command_h) $(defs_h) $(gdbcore_h) \
$(inferior_h) target.h gdb_string.h
1993-06-23 22:59:35 +00:00
corefile.o: corefile.c $(dis-asm_h) $(defs_h) $(gdbcmd_h) $(gdbcore_h) \
$(inferior_h) target.h language.h gdb_string.h
1993-06-23 22:59:35 +00:00
corelow.o: corelow.c $(command_h) $(defs_h) $(gdbcore_h) $(inferior_h) \
target.h gdbthread.h gdb_string.h
1993-06-23 22:59:35 +00:00
cp-valprint.o: cp-valprint.c $(defs_h) $(expression_h) $(gdbcmd_h) \
$(gdbtypes_h) $(symtab_h) $(value_h) gdb_string.h
1993-06-23 22:59:35 +00:00
dcache.o: dcache.c $(dcache_h) $(defs_h) $(gdbcmd_h) gdb_string.h $(gdbcore_h)
1993-08-31 22:13:29 +00:00
1993-06-23 22:59:35 +00:00
dbxread.o: dbxread.c $(breakpoint_h) buildsym.h $(command_h) \
complaints.h $(defs_h) $(expression_h) gdb-stabs.h $(gdbcore_h) \
$(gdbtypes_h) language.h objfiles.h partial-stab.h stabsread.h \
symfile.h $(symtab_h) target.h gdb_string.h
1993-06-23 22:59:35 +00:00
delta68-nat.o: delta68-nat.c $(defs_h)
demangle.o: demangle.c $(defs_h) $(gdbcmd_h) gdb_string.h
dpx2-nat.o: dpx2-nat.c $(defs_h) $(gdbcore_h) gdb_string.h
1993-06-23 22:59:35 +00:00
dstread.o: dstread.c gdb_string.h
1993-06-23 22:59:35 +00:00
dwarfread.o: dwarfread.c $(bfd_h) buildsym.h complaints.h $(defs_h) \
$(expression_h) $(gdbtypes_h) language.h objfiles.h symfile.h \
$(symtab_h) gdb_string.h
1993-06-23 22:59:35 +00:00
dwarf2read.o: dwarf2read.c $(bfd_h) buildsym.h $(defs_h) \
$(expression_h) $(gdbtypes_h) language.h objfiles.h symfile.h \
$(symtab_h) gdb_string.h
1993-06-23 22:59:35 +00:00
elfread.o: elfread.c $(bfd_h) buildsym.h complaints.h $(defs_h) \
gdb-stabs.h objfiles.h symfile.h $(symtab_h) gdb_string.h
1993-06-23 22:59:35 +00:00
environ.o: environ.c $(defs_h) environ.h $(gdbcore_h) gdb_string.h
1993-06-23 22:59:35 +00:00
eval.o: eval.c $(bfd_h) $(defs_h) $(expression_h) $(frame_h) \
$(gdbtypes_h) language.h $(symtab_h) target.h $(value_h) \
gdb_string.h
1993-06-23 22:59:35 +00:00
exec.o: exec.c $(defs_h) $(gdbcmd_h) $(gdbcore_h) $(inferior_h) \
target.h language.h gdb_string.h
1993-06-23 22:59:35 +00:00
expprint.o: expprint.c $(defs_h) $(expression_h) $(gdbtypes_h) \
language.h parser-defs.h $(symtab_h) $(value_h)
findvar.o: findvar.c $(defs_h) $(gdbcore_h) $(inferior_h) target.h \
gdb_string.h
1993-06-23 22:59:35 +00:00
fork-child.o: fork-child.c $(wait_h) $(defs_h) $(gdbcore_h) \
$(inferior_h) target.h terminal.h gdbthread.h gdb_string.h
1993-06-23 22:59:35 +00:00
# start-sanitize-gdbtk
gdbtk.o: gdbtk.c $(defs_h) $(symtab_h) $(inferior_h) $(command_h) \
$(bfd_h) symfile.h objfiles.h target.h gdb_string.h
$(CC) -c $(INTERNAL_CFLAGS) $(TCL_CFLAGS) $(TK_CFLAGS) $(X11_CFLAGS) \
$(srcdir)/gdbtk.c -DGDBTK_FILENAME=\"$(datadir)/gdbtk.tcl\"
# end-sanitize-gdbtk
1993-06-23 22:59:35 +00:00
gdbtypes.o: gdbtypes.c $(bfd_h) complaints.h $(defs_h) $(expression_h) \
$(gdbtypes_h) language.h objfiles.h symfile.h $(symtab_h) target.h \
$(value_h) gdb_string.h
1993-06-23 22:59:35 +00:00
go32-xdep.o: go32-xdep.c
gould-tdep.o: gould-tdep.c $(OP_INCLUDE)/np1.h $(defs_h) $(frame_h) \
1993-06-23 22:59:35 +00:00
$(gdbcore_h) $(symtab_h)
gould-xdep.o: gould-xdep.c $(defs_h) $(gdbcore_h) $(inferior_h)
1993-06-23 22:59:35 +00:00
h8300-tdep.o: h8300-tdep.c $(defs_h) $(frame_h) $(symtab_h)
h8500-tdep.o: h8500-tdep.c $(bfd_h) $(dis-asm_h) $(defs_h) \
$(expression_h) $(frame_h) $(gdbcmd_h) $(gdbtypes_h) $(symtab_h) \
$(value_h)
hp300ux-nat.o: hp300ux-nat.c $(defs_h) $(gdbcore_h) $(inferior_h)
hppa-tdep.o: hppa-tdep.c $(wait_h) $(defs_h) $(gdbcmd_h) $(gdbcore_h) \
$(inferior_h) objfiles.h symfile.h target.h
hppab-nat.o: hppab-nat.c $(bfd_h) $(defs_h) $(inferior_h) target.h
hppah-nat.o: hppah-nat.c $(bfd_h) $(defs_h) $(inferior_h) target.h
i386-tdep.o: i386-tdep.c $(defs_h) $(gdbcore_h) $(inferior_h) target.h \
gdb_string.h
i386aix-nat.o: i386aix-nat.c $(defs_h) $(frame_h) $(inferior_h) \
language.h $(gdbcore_h) $(floatformat_h) target.h
1993-06-23 22:59:35 +00:00
i386b-nat.o: i386b-nat.c $(defs_h)
i386ly-nat.o: i386ly-nat.c $(defs_h) $(frame_h) $(inferior_h) target.h
i386ly-tdep.o: i386ly-tdep.c $(defs_h) $(inferior_h) target.h $(gdbcore_h)
i386m3-nat.o: i386m3-nat.c $(defs_h) $(inferior_h) $(floatformat_h) target.h
1993-06-23 22:59:35 +00:00
i386mach-nat.o: i386mach-nat.c $(defs_h) $(gdbcore_h) $(inferior_h)
i386v-nat.o: i386v-nat.c $(floatformat_h) $(defs_h) $(gdbcore_h) \
1993-06-23 22:59:35 +00:00
$(inferior_h) language.h target.h
i386v4-nat.o: i386v4-nat.c $(defs_h)
i387-tdep.o: i387-tdep.c $(floatformat_h) $(defs_h) $(gdbcore_h) \
1993-06-23 22:59:35 +00:00
$(inferior_h) language.h
i960-tdep.o: i960-tdep.c $(floatformat_h) $(defs_h) $(expression_h) \
$(frame_h) $(gdbtypes_h) $(symtab_h) $(value_h) $(gdbcore_h)
1993-06-23 22:59:35 +00:00
infcmd.o: infcmd.c $(defs_h) environ.h $(gdbcmd_h) $(gdbcore_h) \
$(inferior_h) target.h language.h gdb_string.h
1993-06-23 22:59:35 +00:00
inflow.o: inflow.c $(bfd_h) $(command_h) $(defs_h) $(inferior_h) \
signals.h target.h terminal.h gdbthread.h gdb_string.h
1993-06-23 22:59:35 +00:00
infptrace.o: infptrace.c $(defs_h) $(gdbcore_h) $(inferior_h) target.h \
* core-aout.c (fetch_core_registers): Cast core_reg_size to int before testing against reg_ptr. * eval.c (evaluate_subexp_standard): Cast type of TYPE_FN_FIELD_VOFFSET to int. * findvar.c (extract_signed_integer, extract_unsigned_integer, extract_long_unsigned_integer): Cast type of sizeof to int. * values.c (unpack_field_as_long, modify_field): Ditto. * valops.c (value_assign, call_function_by_hand): Ditto. * infcmd.c (do_registers_info): Ditto. * ser-tcp.c (tcp_open): Ditto * remote.c (putpkt): Ditto. * dcache.c (dcache_peek): Ditto. * dcache.c (dcache_poke): Ditto. * m2-exp.y (yylex): Ditto. * gnu-regex.c (re_match_2): Ditto. * f-lang.c (ADD_BF_SYMNUM, saved_bf_list_end, tmp_bf_ptr): Ifdef out unused macro definition and variables. * inftarg.c (proc_wait): Move from main.c to here, and make static. * valprint.c (val_print_string): Change bufsize from int to unsigned. * main.c (wait.h): Include * top.c (command_line_input): Remove unused variable "c". * f-typeprint.c (f_type_print_varspec_prefix): Add missing enum value TYPE_CODE_TYPEDEF to switch statement. (f_type_print_varspec_suffix): Add missing enum value TYPE_CODE_TYPEDEF to switch statement. * ch-exp.c (parse_primval): Add remaining enumeration values to switch statement, with no specific action. (ch_lex): Add LOC_UNRESOLVED in switch statement. (pushback_token): Ifdef out, since code using it is ifdef'd out. * stabsread.c (cleanup_undefined_types): Remove unused label "badtype". * objfiles.h (print_symbol_bcache_statistics): Add prototype. * maint.c (objfiles.h): Include. (maintenance_print_statistics): Remove unused variable "temp". * minsyms.c (lookup_minimal_symbol_solib_trampoline): Remove unused variable "found_file_symbol". * m2-exp.y (yylex): Add LOC_UNRESOLVED case to switch. * language.c (lang_bool_type): Use existing function local type variable rather than create block local variables. * solib.c (disable_break): Enclose in ifndef SVR4_SHARED_LIBS. * infptrace.c (wait.h, command.h): Include. * ser-tcp.c (gdb_string.h): Include * i386-tdep.c (codestream_seek): Change "place" to CORE_ADDR. (i386_get_frame_setup): Change "pc" from int to CORE_ADDR. * command.c (complete_on_enum): Make assignment used as truth value explictly check against NULL. (wait.h): Include. * infrun.c (wait_for_inferior): Ifdef out prologue_pc since code that uses it is ifdef'd out. * parser-defs.h: Add prototype for write_dollar_variable. * infrun.c: Add prototype for write_pc_pid. * breakpoint.h: Add prototype for re_enable_breakpoints_in_shlibs. * symmisc.c (bcache.h): Include. * bcache.h: Add prototype for print_bcache_statistics. * symfile.c: Include <time.h>. * printcmd.c (print_scalar_formatted): Change len to unsigned int. * valarith.c (value_equal): Cast result of TYPE_LENGTH to int. * valarith.c (value_binop): Change result_len, promoted_len1, and promoted_len2 to unsigned int. * valarith.c (value_subscripted_rvalue): Change elt_offs and elt_size to unsigned int. * valops.c (value_array): Change typelength to unsigned int. (destructor_name_p): Change len to unsigned int. * scm-lang.h (scm_parse): Add prototype for scm_unpack. * symfile.c (decrement_reading_symtab): Change return type to void. * valarith.c (value_subscript): Remove unused variable "word". (value_subscript): Remove unused variable "tint". * valops.c (auto_abandon): Ifdef out, since code using it is also ifdef'd out. * eval.c (init_array_element): Remove unused variable "val". * Makefile.in (values.o): Depends on scm-lang.h. (command.o): Depends upon wait_h. (ser-tcp.o): Depends upon gdb_string.h. (infptrace.o): Depends upon wait_h and command_h. (maint.o): Depends on objfiles.h and symfile.h. * values.c (allocate_repeat_value): Remove unused variable "element_type". (scm-lang.h): Include. * breakpoint.c (create_longjmp_breakpoint): Enclose in GET_LONGJMP_TARGET define, unused otherwise. * config/i386/nm-linux.h: Add prototypes for i386_insert_watchpoint, i386_remove_watchpoint and i386_stopped_by_watchpoint.
1996-03-30 05:45:10 +00:00
gdb_string.h $(wait_h) $(command_h)
1993-06-23 22:59:35 +00:00
infrun.o: infrun.c $(wait_h) $(defs_h) $(gdbcmd_h) $(gdbcore_h) \
$(inferior_h) target.h gdbthread.h gdb_string.h
1993-06-23 22:59:35 +00:00
inftarg.o: inftarg.c $(wait_h) $(defs_h) $(gdbcore_h) $(inferior_h) \
target.h terminal.h $(command_h)
1993-06-23 22:59:35 +00:00
irix4-nat.o: irix4-nat.c $(defs_h) $(inferior_h) $(gdbcore_h)
irix5-nat.o: irix5-nat.c $(defs_h) $(inferior_h) $(gdbcore_h) target.h \
$(symtab_h) symfile.h objfiles.h $(command_h) $(frame_h) gnu-regex.h \
language.h gdb_string.h
1993-06-23 22:59:35 +00:00
isi-xdep.o: isi-xdep.c
language.o: language.c $(bfd_h) $(defs_h) $(expression_h) $(frame_h) \
$(gdbcmd_h) $(gdbtypes_h) language.h parser-defs.h $(symtab_h) \
target.h $(value_h) gdb_string.h
1993-06-23 22:59:35 +00:00
lynx-nat.o: lynx-nat.c $(defs_h) $(frame_h) $(inferior_h) $(gdbcore_h) \
target.h
1993-06-23 22:59:35 +00:00
m2-lang.o: m2-lang.c $(defs_h) $(expression_h) $(gdbtypes_h) \
language.h m2-lang.h parser-defs.h $(symtab_h)
m2-typeprint.o: m2-typeprint.c $(defs_h) $(expression_h) $(gdbcmd_h) \
$(gdbcore_h) $(gdbtypes_h) language.h m2-lang.h $(symtab_h) target.h \
$(value_h) gdb_string.h
1993-06-23 22:59:35 +00:00
m2-valprint.o: m2-valprint.c $(defs_h) $(gdbtypes_h) $(symtab_h) \
valprint.h m2-lang.h
1993-06-23 22:59:35 +00:00
m3-nat.o: m3-nat.c $(defs_h) $(inferior_h) $(value_h) language.h target.h \
$(wait_h) $(gdbcmd_h) $(gdbcore_h)
m68k-tdep.o: m68k-tdep.c $(defs_h) $(frame_h) $(symtab_h) $(value_h) \
$(gdbcore_h) gdb_string.h
m68kly-nat.o: m68kly-nat.c $(defs_h) $(frame_h) $(inferior_h) target.h
1993-06-23 22:59:35 +00:00
m88k-nat.o: m88k-nat.c $(defs_h) $(gdbcore_h) $(inferior_h)
1993-06-23 22:59:35 +00:00
m88k-tdep.o: m88k-tdep.c $(defs_h) $(gdbcore_h) $(inferior_h)
mac-nat.o: mac-nat.c $(defs_h) gdb_string.h
main.o: main.c top.h $(defs_h) gdb_string.h
1993-06-23 22:59:35 +00:00
maint.o: maint.c $(defs_h) $(gdbcmd_h) $(gdbtypes_h) $(symtab_h) language.h \
* core-aout.c (fetch_core_registers): Cast core_reg_size to int before testing against reg_ptr. * eval.c (evaluate_subexp_standard): Cast type of TYPE_FN_FIELD_VOFFSET to int. * findvar.c (extract_signed_integer, extract_unsigned_integer, extract_long_unsigned_integer): Cast type of sizeof to int. * values.c (unpack_field_as_long, modify_field): Ditto. * valops.c (value_assign, call_function_by_hand): Ditto. * infcmd.c (do_registers_info): Ditto. * ser-tcp.c (tcp_open): Ditto * remote.c (putpkt): Ditto. * dcache.c (dcache_peek): Ditto. * dcache.c (dcache_poke): Ditto. * m2-exp.y (yylex): Ditto. * gnu-regex.c (re_match_2): Ditto. * f-lang.c (ADD_BF_SYMNUM, saved_bf_list_end, tmp_bf_ptr): Ifdef out unused macro definition and variables. * inftarg.c (proc_wait): Move from main.c to here, and make static. * valprint.c (val_print_string): Change bufsize from int to unsigned. * main.c (wait.h): Include * top.c (command_line_input): Remove unused variable "c". * f-typeprint.c (f_type_print_varspec_prefix): Add missing enum value TYPE_CODE_TYPEDEF to switch statement. (f_type_print_varspec_suffix): Add missing enum value TYPE_CODE_TYPEDEF to switch statement. * ch-exp.c (parse_primval): Add remaining enumeration values to switch statement, with no specific action. (ch_lex): Add LOC_UNRESOLVED in switch statement. (pushback_token): Ifdef out, since code using it is ifdef'd out. * stabsread.c (cleanup_undefined_types): Remove unused label "badtype". * objfiles.h (print_symbol_bcache_statistics): Add prototype. * maint.c (objfiles.h): Include. (maintenance_print_statistics): Remove unused variable "temp". * minsyms.c (lookup_minimal_symbol_solib_trampoline): Remove unused variable "found_file_symbol". * m2-exp.y (yylex): Add LOC_UNRESOLVED case to switch. * language.c (lang_bool_type): Use existing function local type variable rather than create block local variables. * solib.c (disable_break): Enclose in ifndef SVR4_SHARED_LIBS. * infptrace.c (wait.h, command.h): Include. * ser-tcp.c (gdb_string.h): Include * i386-tdep.c (codestream_seek): Change "place" to CORE_ADDR. (i386_get_frame_setup): Change "pc" from int to CORE_ADDR. * command.c (complete_on_enum): Make assignment used as truth value explictly check against NULL. (wait.h): Include. * infrun.c (wait_for_inferior): Ifdef out prologue_pc since code that uses it is ifdef'd out. * parser-defs.h: Add prototype for write_dollar_variable. * infrun.c: Add prototype for write_pc_pid. * breakpoint.h: Add prototype for re_enable_breakpoints_in_shlibs. * symmisc.c (bcache.h): Include. * bcache.h: Add prototype for print_bcache_statistics. * symfile.c: Include <time.h>. * printcmd.c (print_scalar_formatted): Change len to unsigned int. * valarith.c (value_equal): Cast result of TYPE_LENGTH to int. * valarith.c (value_binop): Change result_len, promoted_len1, and promoted_len2 to unsigned int. * valarith.c (value_subscripted_rvalue): Change elt_offs and elt_size to unsigned int. * valops.c (value_array): Change typelength to unsigned int. (destructor_name_p): Change len to unsigned int. * scm-lang.h (scm_parse): Add prototype for scm_unpack. * symfile.c (decrement_reading_symtab): Change return type to void. * valarith.c (value_subscript): Remove unused variable "word". (value_subscript): Remove unused variable "tint". * valops.c (auto_abandon): Ifdef out, since code using it is also ifdef'd out. * eval.c (init_array_element): Remove unused variable "val". * Makefile.in (values.o): Depends on scm-lang.h. (command.o): Depends upon wait_h. (ser-tcp.o): Depends upon gdb_string.h. (infptrace.o): Depends upon wait_h and command_h. (maint.o): Depends on objfiles.h and symfile.h. * values.c (allocate_repeat_value): Remove unused variable "element_type". (scm-lang.h): Include. * breakpoint.c (create_longjmp_breakpoint): Enclose in GET_LONGJMP_TARGET define, unused otherwise. * config/i386/nm-linux.h: Add prototypes for i386_insert_watchpoint, i386_remove_watchpoint and i386_stopped_by_watchpoint.
1996-03-30 05:45:10 +00:00
$(expression_h) objfiles.h symfile.h
mdebugread.o: mdebugread.c buildsym.h complaints.h $(bfd_h) $(defs_h) \
$(expression_h) gdb-stabs.h $(gdbcore_h) $(gdbtypes_h) language.h \
objfiles.h partial-stab.h stabsread.h symfile.h $(symtab_h) \
gdb_string.h
mipsm3-nat.o: mipsm3-nat.c $(defs_h) $(inferior_h)
os9kread.o: os9kread.c buildsym.h complaints.h $(bfd_h) $(defs_h) \
$(expression_h) gdb-stabs.h $(gdbcore_h) $(gdbtypes_h) language.h \
objfiles.h stabsread.h symfile.h $(symtab_h) \
target.h gdb_string.h
1993-06-23 22:59:35 +00:00
mem-break.o: mem-break.c $(defs_h)
minsyms.o: minsyms.c $(bfd_h) $(defs_h) objfiles.h symfile.h \
$(symtab_h) gdb_string.h
1993-06-23 22:59:35 +00:00
mips-nat.o: mips-nat.c $(defs_h) $(gdbcore_h) $(inferior_h)
mips-tdep.o: mips-tdep.c $(defs_h) $(gdbcmd_h) $(gdbcore_h) \
$(inferior_h) language.h objfiles.h symfile.h gdb_string.h
1993-06-23 22:59:35 +00:00
mipsread.o: mipsread.c buildsym.h complaints.h $(bfd_h) $(defs_h) \
1993-06-23 22:59:35 +00:00
$(expression_h) gdb-stabs.h $(gdbcore_h) $(gdbtypes_h) language.h \
objfiles.h partial-stab.h stabsread.h symfile.h $(symtab_h) \
gdb_string.h
1993-06-23 22:59:35 +00:00
gcc -Wall lint: * breakpoint.c (watchpoint_check): Remove unused variable b. * stack.c (print_frame_info): Move sp and buf inside #if. * eval.c (evaluate_subexp): Remove unused variables pp, mangle_ptr, ptr, and mangle_tstr. * valarith.c (value_x_binop): Remove unused variables mangle_tstr and mangle_ptr. * symtab.c (lookup_symtab): Put variable copy inside #if. (decode_line_1): Put variable q1 inside #if 0. * target.h: Declare target_link. * infrun.c (wait_for_inferior): Remove unused variables signame. * remote.c (remote_resume): Remove unused variable name. * c-exp.y (parse_number): Parenthesize operand of shift. * dbxread.c (record_minimal_symbol): Parenthesize operand of && (this is a semantic change, the warning seems to have detected a bug). * dbxread.c (end_psymtab): Move variable p1 inside #if. * coffread.c: Move variable temptype inside #if. * ch-typeprint.c (chill_type_print_base): Remove unused variable name. * ch-valprint.c: #include typeprint.h and ch-lang.h. (chill_val_print): Remove unused variable in_range. (chill_val_print): Remove statement "length > TYPE_LENGTH (type);". (chill_val_print): Add default case for switch. * stabsread.h: Declare stabsect_build_psymtabs. * os9kread.c (read_minimal_symbols): Make this return void. (os9k_symfile_read): Remove unused variables stb_exist and val. (os9k_symfile_init): Remove unused variable val. (fill_sym): Remove unused variable id. (read_os9k_psymtab): Put variable back_to inside #if 0. Remove unused variable nsl. Remove unused variable symfile_bfd. #if 0 unused variables lbrac_unmatched_complaint and lbrac_mismatch_complaint. Remove declaration for non-existent function os9k_next_symbol_text. * annotate.c, annotate.h: New files, containing a function for each annotation which outputs it. * Move breakpoints_changed from breakpoint.c to annotate.c. * breakpoint.c, blockframe.c, infrun.c, cp-valprint.c, main.c, printcmd.c, source.c, stack.c, utils.c, valprint.c: Use annotate.c functions to output annotations. * Makefile.in (OBS): Add annotate.o.
1994-05-13 18:18:57 +00:00
mipsv4-nat.o: mipsv4-nat.c $(defs_h) $(gdbcore_h) $(inferior_h) target.h
monitor.o: monitor.c monitor.h $(bfd_h) $(wait_h) $(defs_h) $(gdbcmd_h) \
$(inferior_h) target.h serial.h terminal.h gdb_string.h
1993-06-23 22:59:35 +00:00
news-xdep.o: news-xdep.c
Onindy.o: nindy-share/Onindy.c $(wait_h) nindy-share/block_io.h \
nindy-share/env.h
1993-06-23 22:59:35 +00:00
$(CC) -c $(INTERNAL_CFLAGS) $(srcdir)/nindy-share/Onindy.c
nindy.o: nindy-share/nindy.c $(wait_h) nindy-share/block_io.h \
nindy-share/env.h
1993-06-23 22:59:35 +00:00
$(CC) -c $(INTERNAL_CFLAGS) $(srcdir)/nindy-share/nindy.c
nlmread.o: nlmread.c $(bfd_h) buildsym.h complaints.h $(defs_h) \
gdb-stabs.h objfiles.h symfile.h $(symtab_h) stabsread.h \
gdb_string.h
ns32km3-nat.o: ns32km3-nat.c $(defs_h) $(inferior_h)
ttyflush.o: nindy-share/ttyflush.c
1993-06-23 22:59:35 +00:00
$(CC) -c $(INTERNAL_CFLAGS) $(srcdir)/nindy-share/ttyflush.c
nindy-tdep.o: nindy-tdep.c $(defs_h) $(frame_h) $(symtab_h) $(gdbcore_h)
1993-06-23 22:59:35 +00:00
ns32k-tdep.o: ns32k-tdep.c $(bfd_h) $(dis-asm_h) $(defs_h)
1993-06-23 22:59:35 +00:00
objfiles.o: objfiles.c $(bfd_h) $(defs_h) objfiles.h symfile.h \
$(symtab_h) gdb_string.h
1993-06-23 22:59:35 +00:00
Changes to support alpha OSF/1 in native mode. * alpha-nat.c, alpha-tdep.c, config/alpha/alpha-osf1.mt, config/alpha/nm-alpha.h, config/alpha/tm-alpha.h, osfsolib.c: New files. * Makefile.in: Add new files and dependencies. * configure.in: Add alpha target. * config/alpha/alpha-osf1.mh (NATDEPFILES): Add osfsolib.o * config/alpha/alpha-osf1.mh (MH_CFLAGS): Remove, we can handle shared libraries now. * config/alpha/xm-alpha.h: Cleanup, get MAKEVA_* defines right. * defs.h (CORE_ADDR): Make its type overridable via CORE_ADDR_TYPE, provide `unsigned int' default. * breakpoint.c (breakpoint_auto_delete): Delete only if we really stopped for the breakpoint. * stabsread.c, stabsread.h (define_symbol): Change valu parameter to a CORE_ADDR. * stabsread.c (read_range_type): Handle the case where the lower bound overflows and the upper doesn't and the range is legal. * infrun.c (resume): Do not step a breakpoint instruction if CANNOT_STEP_BREAKPOINT is defined. * inferior.h (CALL_DUMMY_LOCATION): New variant AT_ENTRY_POINT. Now that we have the bp_call_dummy breakpoint the call dummy code is no longer needed. PUSH_DUMMY_FRAME, PUSH_ARGUMENTS and FIX_CALL_DUMMY can be used to set up everything for the dummy. The breakpoint for the dummy is set at the entry point and thats it. * blockframe.c (inside_entry_file, inside_entry_func): Do not stop backtraces if pc is in the call dummy at the entry point. * infcmd.c (run_stack_dummy): Handle AT_ENTRY_POINT case. Use the expected breakpoint pc when setting up the frame for set_momentary_breakpoint. * symfile.c (entry_point_address): New function for AT_ENTRY_POINT support. * valops.c (call_function_by_hand): Handle AT_ENTRY_POINT case.
1993-10-05 19:44:57 +00:00
osfsolib.o: osfsolib.c $(command_h) $(defs_h) $(gdbcore_h) $(inferior_h) \
objfiles.h gnu-regex.h symfile.h target.h language.h gdb_string.h
Changes to support alpha OSF/1 in native mode. * alpha-nat.c, alpha-tdep.c, config/alpha/alpha-osf1.mt, config/alpha/nm-alpha.h, config/alpha/tm-alpha.h, osfsolib.c: New files. * Makefile.in: Add new files and dependencies. * configure.in: Add alpha target. * config/alpha/alpha-osf1.mh (NATDEPFILES): Add osfsolib.o * config/alpha/alpha-osf1.mh (MH_CFLAGS): Remove, we can handle shared libraries now. * config/alpha/xm-alpha.h: Cleanup, get MAKEVA_* defines right. * defs.h (CORE_ADDR): Make its type overridable via CORE_ADDR_TYPE, provide `unsigned int' default. * breakpoint.c (breakpoint_auto_delete): Delete only if we really stopped for the breakpoint. * stabsread.c, stabsread.h (define_symbol): Change valu parameter to a CORE_ADDR. * stabsread.c (read_range_type): Handle the case where the lower bound overflows and the upper doesn't and the range is legal. * infrun.c (resume): Do not step a breakpoint instruction if CANNOT_STEP_BREAKPOINT is defined. * inferior.h (CALL_DUMMY_LOCATION): New variant AT_ENTRY_POINT. Now that we have the bp_call_dummy breakpoint the call dummy code is no longer needed. PUSH_DUMMY_FRAME, PUSH_ARGUMENTS and FIX_CALL_DUMMY can be used to set up everything for the dummy. The breakpoint for the dummy is set at the entry point and thats it. * blockframe.c (inside_entry_file, inside_entry_func): Do not stop backtraces if pc is in the call dummy at the entry point. * infcmd.c (run_stack_dummy): Handle AT_ENTRY_POINT case. Use the expected breakpoint pc when setting up the frame for set_momentary_breakpoint. * symfile.c (entry_point_address): New function for AT_ENTRY_POINT support. * valops.c (call_function_by_hand): Handle AT_ENTRY_POINT case.
1993-10-05 19:44:57 +00:00
somread.o: somread.c $(bfd_h) buildsym.h complaints.h $(defs_h) \
gdb-stabs.h objfiles.h symfile.h $(symtab_h) gdb_string.h
1993-06-23 22:59:35 +00:00
somsolib.o: somsolib.c $(defs_h)
* Makefile.in: Add rule for hpux-thread.o (needs special header files). * (SUBDIRS): Remove mswin. * Change procedure for creating init.c. Speeds things up quite a bit. * config.in configure configure.in: Check for select, poll. * Check for OSF header files before including hpux-thread.o. * Don't configure doc or testsuite when building under MSVC. * findvar.c value.h (read_register_pid write_register_pid): Make global. Needed for hppa-tdep.c. * (supply_register): Don't set pid to inferior_pid when supplying registers. * hppa-tdep.c (saved_pc_after_call): frame_saved_pc -> FRAME_SAVED_PC. * (frame_saved_pc): Change name to hppa_frame_saved_pc. * (hppa_pop_frame): Don't use a pid of 0 with target_write_pc. Use write_pc instead, which uses the correct pid. * (target_read_pc target_write_pc): Use read/write_register_pid instead of read/write_register to preserve the pid passed in. * inftarg.c (child_can_run): Add flag child_suppress_run to allow hpux-threads.c to override this as a runnable target. * config/pa/nm-hppah.h: Define target_new_objfile and target_pid_to_str. * config/pa/tm-hppa.h (FRAME_SAVED_PC): Use hppa_frame_saved_pc instead of frame_saved_pc. * config/m68k/tm-m68k.h: Define TARGET_M68K for Wingdb. * config/m68k/tm-monitor.h: Use FRAME_CHAIN_VALID_ALTERNATE, since we can't easily determine the start file bounds with ELF. * config/mips/tm-mips.h: Define TARGET_MIPS for Wingdb. * hpux-thread.c: New file for HPUX/OSF thread support. * osf-share/{README AT386/cma_thread_io.h HP800/cma_thread_io.h RIOS/cma_thread_io.h cma_attr.h cma_deb_core.h cma_debug_client.h cma_errors.h cma_handle.h cma_init.h cma_list.h cma_mutex.h cma_sched.h cma_semaphore_defs.h cma_sequence.h cma_stack.h cma_stack_int.h cma_tcb_defs.h cma_util.h}: New files for OSF thread support.
1996-10-08 17:06:17 +00:00
hpux-thread.o: hpux-thread.c $(defs_h) gdbthread.h target.h inferior.h
$(CC) -c $(INTERNAL_CFLAGS) -I$(srcdir)/osf-share \
-I$(srcdir)/osf-share/HP800 -I/usr/include/dce $(srcdir)/hpux-thread.c
hpread.o: hpread.c $(bfd_h) buildsym.h complaints.h $(defs_h) \
gdb-stabs.h objfiles.h symfile.h $(symtab_h) gdb_string.h
1993-06-23 22:59:35 +00:00
parse.o: parse.c $(command_h) $(defs_h) $(expression_h) $(frame_h) \
$(gdbtypes_h) language.h parser-defs.h $(symtab_h) $(value_h) \
gdb_string.h
1993-06-23 22:59:35 +00:00
ppcbug-rom.o: ppcbug-rom.c monitor.h $(bfd_h) $(wait_h) $(defs_h) $(gdbcmd_h) \
$(inferior_h) target.h serial.h terminal.h
1993-06-23 22:59:35 +00:00
printcmd.o: printcmd.c $(breakpoint_h) $(defs_h) $(expression_h) \
$(gdbcmd_h) $(gdbcore_h) $(gdbtypes_h) language.h objfiles.h \
symfile.h $(symtab_h) target.h gdb_string.h
1993-06-23 22:59:35 +00:00
procfs.o: procfs.c $(command_h) $(defs_h) $(gdbcore_h) $(inferior_h) \
target.h gdb_string.h
1993-06-23 22:59:35 +00:00
pyr-tdep.o: pyr-tdep.c $(defs_h)
1993-06-23 22:59:35 +00:00
pyr-xdep.o: pyr-xdep.c $(defs_h) $(gdbcore_h) $(inferior_h)
gnu-regex.o: gnu-regex.c gnu-regex.h $(defs_h) gdb_string.h
1993-06-23 22:59:35 +00:00
remote-adapt.o: remote-adapt.c $(wait_h) $(defs_h) $(gdbcore_h) \
$(inferior_h) target.h terminal.h gdb_string.h
remote-arc.o: remote-arc.c gdb_string.h
1993-06-23 22:59:35 +00:00
remote-array.o: remote-array.c $(wait_h) $(defs_h) $(gdbcore_h) target.h \
gdb_string.h $(command_h) serial.h monitor.h $(remote_utils_h)
Thu Sep 28 14:32:11 1995 steve chamberlain <sac@slash.cygnus.com> * callback.[ch]: New files. * remote-rdp.c: Support for the ARM RDP monitor. * Makefile: Update. * arm-tdep.c (arm_othernames): New. (_initialize_arm_tdep): install 'othernames' command. (arm_nullified_insn, shifted_reg_val, arm_get_next_pc): New. * configure.in: Check for termios.h, termio.h and sgtty.h. (i[345]86-*-win32*): New host. * configure: Regenerated. * inflow.c: Clean up inclusions. * main.c (main): Check for WINGDB, not WIN32. * printcmd.c (do_examine): Put QUIT test in loop. * remote-hms.c (e7000_load): Delete. (hms_ops): Point to generic_load instead. * remote-hms.c (hms_ops): Point to generic_load. * remote-sim.c (sim_callback_write_stdout): Becomes gdbsim_write_stdout. (gdbsim_load): Call generic_load. * remote-utils.c (gr_load_image): Delete. * ser-unix.c (terminal.h): Include instead of havig own #if tree. (hardwire_flush_input): Reset input buffer too. * source.c (openp): If WIN32 then open file in binary mode. * terminal.h: Configure IO mechanism using autoconf defines if available and not overriden. * utils.c (quit, pollquit, notice_quit): WIN32 check becomes WINGDB check. * config/arm/arm.mt (TDEPFILES): Add remote-rdp.o * config/arm/tm-arm.h (TARGET_BYTE_ORDER): becomes TARGET_BYTE_ORDER_SELECTABLE. (ADDR_BITS_REMOVE): New. (ORIGINAL_REGISTER_NAMES, ADDITIONAL_REGISTER_NAMES): New. (INST_xx): New (FRAME_FIND_SAVED_REGS): Pass the right argument. (arm_get_next_pc): Declare. * mswin/prebuilt/*/bfdtarget.h (SELECT_ARCHITECTURES): Need leading &.
1995-09-29 00:14:01 +00:00
remote-rdp.o: remote-rdp.c $(wait_h) $(defs_h) $(gdbcore_h) \
$(inferior_h) gdb_string.h
Thu Sep 28 14:32:11 1995 steve chamberlain <sac@slash.cygnus.com> * callback.[ch]: New files. * remote-rdp.c: Support for the ARM RDP monitor. * Makefile: Update. * arm-tdep.c (arm_othernames): New. (_initialize_arm_tdep): install 'othernames' command. (arm_nullified_insn, shifted_reg_val, arm_get_next_pc): New. * configure.in: Check for termios.h, termio.h and sgtty.h. (i[345]86-*-win32*): New host. * configure: Regenerated. * inflow.c: Clean up inclusions. * main.c (main): Check for WINGDB, not WIN32. * printcmd.c (do_examine): Put QUIT test in loop. * remote-hms.c (e7000_load): Delete. (hms_ops): Point to generic_load instead. * remote-hms.c (hms_ops): Point to generic_load. * remote-sim.c (sim_callback_write_stdout): Becomes gdbsim_write_stdout. (gdbsim_load): Call generic_load. * remote-utils.c (gr_load_image): Delete. * ser-unix.c (terminal.h): Include instead of havig own #if tree. (hardwire_flush_input): Reset input buffer too. * source.c (openp): If WIN32 then open file in binary mode. * terminal.h: Configure IO mechanism using autoconf defines if available and not overriden. * utils.c (quit, pollquit, notice_quit): WIN32 check becomes WINGDB check. * config/arm/arm.mt (TDEPFILES): Add remote-rdp.o * config/arm/tm-arm.h (TARGET_BYTE_ORDER): becomes TARGET_BYTE_ORDER_SELECTABLE. (ADDR_BITS_REMOVE): New. (ORIGINAL_REGISTER_NAMES, ADDITIONAL_REGISTER_NAMES): New. (INST_xx): New (FRAME_FIND_SAVED_REGS): Pass the right argument. (arm_get_next_pc): Declare. * mswin/prebuilt/*/bfdtarget.h (SELECT_ARCHITECTURES): Need leading &.
1995-09-29 00:14:01 +00:00
1993-08-27 02:37:22 +00:00
remote-bug.o: remote-bug.c $(wait_h) $(defs_h) $(gdbcore_h) \
$(inferior_h) target.h terminal.h $(remote_utils_h) gdb_string.h
1993-08-27 02:37:22 +00:00
remote-e7000.o: remote-e7000.c $(defs_h) $(gdbcore_h) target.h \
$(wait_h) serial.h gdb_string.h
1993-06-23 22:59:35 +00:00
remote-eb.o: remote-eb.c $(wait_h) $(srcdir)/config/a29k/tm-a29k.h \
$(defs_h) $(gdbcore_h) $(inferior_h) symfile.h target.h terminal.h \
gdb_string.h
1993-06-23 22:59:35 +00:00
remote-es.o: remote-es.c $(bfd_h) $(wait_h) $(command_h) $(defs_h) \
$(inferior_h) $(remote_utils_h) terminal.h gdb_string.h
1993-06-23 22:59:35 +00:00
remote-hms.o: remote-hms.c $(wait_h) $(defs_h) $(gdbcore_h) \
$(inferior_h) serial.h target.h terminal.h gdb_string.h
1993-06-23 22:59:35 +00:00
remote-mips.o: remote-mips.c $(wait_h) $(defs_h) $(gdbcmd_h) \
$(gdbcore_h) $(inferior_h) serial.h symfile.h target.h
remote-mm.o: remote-mm.c $(bfd_h) $(wait_h) $(defs_h) $(inferior_h) \
minimon.h target.h terminal.h gdb_string.h
1993-06-23 22:59:35 +00:00
remote-nindy.o: remote-nindy.c $(floatformat_h) $(wait_h) $(command_h) \
$(defs_h) $(gdbcore_h) $(inferior_h) \
1993-09-14 20:08:23 +00:00
nindy-share/env.h nindy-share/stop.h $(remote_utils_h) \
symfile.h
1993-06-23 22:59:35 +00:00
remote-os9k.o: remote-os9k.c $(defs_h) $(gdbcore_h) $(wait_h) \
$(command_h) monitor.h $(remote_utils_h) $(symtab_h) symfile.h \
objfiles.h gdb-stabs.h gdb_string.h
1993-06-23 22:59:35 +00:00
remote-sim.o: remote-sim.c $(wait_h) $(defs_h) $(gdbcore_h) \
$(inferior_h) target.h terminal.h gdb_string.h
1993-06-23 22:59:35 +00:00
remote-st.o: remote-st.c $(wait_h) $(defs_h) $(gdbcore_h) serial.h \
target.h gdb_string.h
1993-06-23 22:59:35 +00:00
remote-udi.o: remote-udi.c $(bfd_h) $(wait_h) $(defs_h) $(gdbcmd_h) \
$(inferior_h) target.h terminal.h $(udiheaders) gdb_string.h
1993-06-23 22:59:35 +00:00
remote-vx.o: remote-vx.c $(wait_h) complaints.h $(defs_h) $(gdbcmd_h) \
$(gdbcore_h) $(inferior_h) target.h vx-share/dbgRpcLib.h \
vx-share/ptrace.h vx-share/xdr_ld.h vx-share/xdr_ptrace.h \
vx-share/xdr_rdb.h gdb-stabs.h objfiles.h symfile.h $(bfd_h) \
gdb_string.h
1993-06-23 22:59:35 +00:00
remote-vx29k.o: remote-vx29k.c $(wait_h) complaints.h $(defs_h) $(gdbcmd_h) \
$(gdbcore_h) $(inferior_h) target.h vx-share/dbgRpcLib.h \
vx-share/ptrace.h vx-share/xdr_ld.h vx-share/xdr_ptrace.h \
vx-share/xdr_rdb.h gdb_string.h
* Makefile.in: Add mswin to SUBDIRS. Add rules for mswin/libwingdb.a and remote-wiggler.o. * breakpoint.c (breakpoint_here_p): Clean up bp enabled test. * (breakpoint_inserted_here_p): New func, just like breakpoint_here_p, except it's honest. Honestly. * breakpoint.h: Proto for above. start-sanitize-gdbtk * configure configure.in: Add host *windows* to list of hosts that don't support GDBtk. end-sanitize-gdbtk * configure configure.in: Add mswin to configdirs if host is i[3456]86-*-windows. * core-aout.c (fetch_core_registers register_addr) gdbcore.h: Change all vars that can contain addresses to type CORE_ADDR. * findvar.c (supply_register): Allow val to be NULL. This means that regno is unsupported. * (read_pc read_pc_pid write_pc write_pc_pid): Make non-pid forms just call pid forms with inferior_pid so that there's only once place to hack PC's and such. * infrun.c (proceed): Don't skip breakpoints if user changed PC. * remote-wiggler.c: New file. Support for BDM interface from Macraigor Systems. * serial.c: Enhance serial logging capability. Add hex and octal output modes (set remotelogbase {hex|octal|ascii}. Also log breaks, timeouts, errors, and eofs. * serial.h: Redefine SERIAL_SEND_BREAK to go through a wrapper function so that we can log breaks. Don't export serial_logfile or serial_logfp. * top.c (execute_command): Don't test for serial_logfp here. Just call serial_log_comand, and let serial.c sort it out. * valops.c (value_of_variable): Don't attempt to establish frames for static and global variables. This makes things work a bit better if the stack or frame pointer is trashed. * config/m68k/monitor.mt (TDEPFILES): Add remote-wiggler.o. * config/m68k/tm-m68k.h: Define STACK_ALIGN. CPU32 can't hack misaligned stacks during function calls.
1996-09-05 01:01:05 +00:00
remote-wiggler.o: remote-wiggler.c $(wait_h) complaints.h $(defs_h) \
$(gdbcmd_h) $(gdbcore_h) $(inferior_h) target.h
1993-09-14 20:08:23 +00:00
remote-utils.o: remote-utils.c $(defs_h) $(gdbcmd_h) $(gdbcore_h) \
$(inferior_h) $(remote_utils_h) gdb_string.h
1993-09-14 20:08:23 +00:00
1993-06-23 22:59:35 +00:00
remote.o: remote.c $(bfd_h) $(wait_h) $(defs_h) $(gdbcmd_h) \
$(inferior_h) $(remote_utils_h) symfile.h terminal.h gdb_string.h
1993-06-23 22:59:35 +00:00
remote-nrom.o: remote-nrom.c $(bfd_h) $(wait_h) $(defs_h) $(gdbcmd_h) \
$(inferior_h) $(remote_utils_h) symfile.h terminal.h
rom68k-rom.o: rom68k-rom.c monitor.h $(bfd_h) $(wait_h) $(defs_h) $(gdbcmd_h) \
$(inferior_h) target.h serial.h terminal.h
rs6000-nat.o: rs6000-nat.c $(bfd_h) $(defs_h) $(inferior_h) target.h \
xcoffsolib.h
1993-06-23 22:59:35 +00:00
rs6000-tdep.o: rs6000-tdep.c $(defs_h) $(gdbcore_h) $(inferior_h) \
target.h xcoffsolib.h
scm-exp.o: $(defs_h) $(value_h) parser-defs.h language.h c-lang.h \
scm-lang.h scm-tags.h
scm-lang.o: $(defs_h) $(value_h) parser-defs.h language.h c-lang.h \
scm-lang.h scm-tags.h gdb_string.h $(gdbcore_h)
scm-valprint.o: $(defs_h) $(value_h) parser-defs.h language.h \
scm-lang.h valprint.h $(gdbcore_h)
1993-06-23 22:59:35 +00:00
ser-go32.o: ser-go32.c $(defs_h) serial.h
ser-mac.o: ser-mac.c $(defs_h) serial.h signals.h
* core-aout.c (fetch_core_registers): Cast core_reg_size to int before testing against reg_ptr. * eval.c (evaluate_subexp_standard): Cast type of TYPE_FN_FIELD_VOFFSET to int. * findvar.c (extract_signed_integer, extract_unsigned_integer, extract_long_unsigned_integer): Cast type of sizeof to int. * values.c (unpack_field_as_long, modify_field): Ditto. * valops.c (value_assign, call_function_by_hand): Ditto. * infcmd.c (do_registers_info): Ditto. * ser-tcp.c (tcp_open): Ditto * remote.c (putpkt): Ditto. * dcache.c (dcache_peek): Ditto. * dcache.c (dcache_poke): Ditto. * m2-exp.y (yylex): Ditto. * gnu-regex.c (re_match_2): Ditto. * f-lang.c (ADD_BF_SYMNUM, saved_bf_list_end, tmp_bf_ptr): Ifdef out unused macro definition and variables. * inftarg.c (proc_wait): Move from main.c to here, and make static. * valprint.c (val_print_string): Change bufsize from int to unsigned. * main.c (wait.h): Include * top.c (command_line_input): Remove unused variable "c". * f-typeprint.c (f_type_print_varspec_prefix): Add missing enum value TYPE_CODE_TYPEDEF to switch statement. (f_type_print_varspec_suffix): Add missing enum value TYPE_CODE_TYPEDEF to switch statement. * ch-exp.c (parse_primval): Add remaining enumeration values to switch statement, with no specific action. (ch_lex): Add LOC_UNRESOLVED in switch statement. (pushback_token): Ifdef out, since code using it is ifdef'd out. * stabsread.c (cleanup_undefined_types): Remove unused label "badtype". * objfiles.h (print_symbol_bcache_statistics): Add prototype. * maint.c (objfiles.h): Include. (maintenance_print_statistics): Remove unused variable "temp". * minsyms.c (lookup_minimal_symbol_solib_trampoline): Remove unused variable "found_file_symbol". * m2-exp.y (yylex): Add LOC_UNRESOLVED case to switch. * language.c (lang_bool_type): Use existing function local type variable rather than create block local variables. * solib.c (disable_break): Enclose in ifndef SVR4_SHARED_LIBS. * infptrace.c (wait.h, command.h): Include. * ser-tcp.c (gdb_string.h): Include * i386-tdep.c (codestream_seek): Change "place" to CORE_ADDR. (i386_get_frame_setup): Change "pc" from int to CORE_ADDR. * command.c (complete_on_enum): Make assignment used as truth value explictly check against NULL. (wait.h): Include. * infrun.c (wait_for_inferior): Ifdef out prologue_pc since code that uses it is ifdef'd out. * parser-defs.h: Add prototype for write_dollar_variable. * infrun.c: Add prototype for write_pc_pid. * breakpoint.h: Add prototype for re_enable_breakpoints_in_shlibs. * symmisc.c (bcache.h): Include. * bcache.h: Add prototype for print_bcache_statistics. * symfile.c: Include <time.h>. * printcmd.c (print_scalar_formatted): Change len to unsigned int. * valarith.c (value_equal): Cast result of TYPE_LENGTH to int. * valarith.c (value_binop): Change result_len, promoted_len1, and promoted_len2 to unsigned int. * valarith.c (value_subscripted_rvalue): Change elt_offs and elt_size to unsigned int. * valops.c (value_array): Change typelength to unsigned int. (destructor_name_p): Change len to unsigned int. * scm-lang.h (scm_parse): Add prototype for scm_unpack. * symfile.c (decrement_reading_symtab): Change return type to void. * valarith.c (value_subscript): Remove unused variable "word". (value_subscript): Remove unused variable "tint". * valops.c (auto_abandon): Ifdef out, since code using it is also ifdef'd out. * eval.c (init_array_element): Remove unused variable "val". * Makefile.in (values.o): Depends on scm-lang.h. (command.o): Depends upon wait_h. (ser-tcp.o): Depends upon gdb_string.h. (infptrace.o): Depends upon wait_h and command_h. (maint.o): Depends on objfiles.h and symfile.h. * values.c (allocate_repeat_value): Remove unused variable "element_type". (scm-lang.h): Include. * breakpoint.c (create_longjmp_breakpoint): Enclose in GET_LONGJMP_TARGET define, unused otherwise. * config/i386/nm-linux.h: Add prototypes for i386_insert_watchpoint, i386_remove_watchpoint and i386_stopped_by_watchpoint.
1996-03-30 05:45:10 +00:00
ser-tcp.o: ser-tcp.c $(defs_h) serial.h signals.h gdb_string.h
1993-06-23 22:59:35 +00:00
ser-unix.o: ser-unix.c $(defs_h) serial.h
serial.o: serial.c $(defs_h) serial.h gdb_string.h
1993-06-23 22:59:35 +00:00
sh-tdep.o: sh-tdep.c $(bfd_h) $(dis-asm_h) \
$(srcdir)/../opcodes/sh-opc.h $(defs_h) $(expression_h) $(frame_h) \
$(gdbcmd_h) $(gdbtypes_h) $(symtab_h) $(value_h)
sh3-rom.o: sh3-rom.c monitor.h $(bfd_h) $(wait_h) $(defs_h) $(gdbcmd_h) \
$(inferior_h) target.h serial.h terminal.h
mon960-rom.o: mon960-rom.c monitor.h $(bfd_h) $(wait_h) $(defs_h) $(gdbcmd_h) \
$(inferior_h) target.h serial.h terminal.h
1993-06-23 22:59:35 +00:00
solib.o: solib.c $(command_h) $(defs_h) $(gdbcore_h) $(inferior_h) \
objfiles.h gnu-regex.h symfile.h target.h gdb_string.h
1993-06-23 22:59:35 +00:00
source.o: source.c $(defs_h) $(expression_h) $(frame_h) $(gdbcmd_h) \
$(gdbcore_h) language.h objfiles.h gnu-regex.h symfile.h $(symtab_h) \
gdb_string.h
1993-06-23 22:59:35 +00:00
sparc-nat.o: sparc-nat.c $(bfd_h) $(defs_h) $(inferior_h) $(gdbcore_h) \
target.h
1993-06-23 22:59:35 +00:00
sparc-tdep.o: sparc-tdep.c $(floatformat_h) $(defs_h) $(gdbcore_h) \
$(inferior_h) objfiles.h symfile.h target.h gdb_string.h
1993-06-23 22:59:35 +00:00
sparcl-tdep.o: sparcl-tdep.c $(defs_h) $(gdbcore_h) target.h
dsrec.o: dsrec.c $(defs_h) srec.h
1993-06-23 22:59:35 +00:00
stabsread.o: stabsread.c $(bfd_h) $(INCLUDE_DIR)/aout/stab.def \
$(INCLUDE_DIR)/aout/stab_gnu.h buildsym.h complaints.h $(defs_h) \
$(gdbtypes_h) objfiles.h stabsread.h symfile.h $(symtab_h) \
gdb_string.h
1993-06-23 22:59:35 +00:00
stack.o: stack.c $(defs_h) $(gdbcmd_h) $(gdbcore_h) $(inferior_h) \
language.h target.h gdb_string.h
1993-06-23 22:59:35 +00:00
sun3-nat.o: sun3-nat.c $(defs_h) $(gdbcore_h) $(inferior_h)
sun386-nat.o: sun386-nat.c $(defs_h) $(inferior_h) $(gdbcore_h)
symfile.o: symfile.c $(breakpoint_h) complaints.h $(defs_h) \
$(expression_h) $(gdbcmd_h) $(gdbcore_h) $(gdbtypes_h) \
language.h objfiles.h symfile.h $(symtab_h) target.h \
gdb_string.h
1993-06-23 22:59:35 +00:00
symm-tdep.o: symm-tdep.c $(defs_h) $(gdbcore_h) $(inferior_h)
symm-nat.o: symm-nat.c $(defs_h) $(gdbcore_h) $(inferior_h)
1993-06-24 23:16:00 +00:00
1993-06-23 22:59:35 +00:00
symmisc.o: symmisc.c $(bfd_h) $(breakpoint_h) $(command_h) $(defs_h) \
$(expression_h) $(gdbtypes_h) language.h objfiles.h symfile.h \
$(symtab_h) gdb_string.h
1993-06-23 22:59:35 +00:00
symtab.o: symtab.c call-cmds.h $(defs_h) $(expression_h) $(frame_h) \
$(gdbcmd_h) $(gdbcore_h) $(gdbtypes_h) language.h objfiles.h \
gnu-regex.h symfile.h $(symtab_h) target.h $(value_h) \
gdb_string.h
1993-06-23 22:59:35 +00:00
tahoe-tdep.o: tahoe-tdep.c $(OP_INCLUDE)/tahoe.h $(defs_h) \
1993-06-23 22:59:35 +00:00
$(symtab_h)
target.o: target.c $(bfd_h) $(defs_h) $(gdbcmd_h) $(inferior_h) \
objfiles.h symfile.h target.h gdb_string.h
1993-06-23 22:59:35 +00:00
thread.o: thread.c $(defs_h) gdbthread.h $(gdbcmd_h)
Sun Aug 1 22:58:18 1993 Stu Grossman (grossman at cygnus.com) * Makefile.in (CLIBS): Reorder to make Lynx ld happy. * (HFILES): New file thread.h. * (OBS): New file thread.c. * configure.in: Host config for Lynx/386. * fork-child.c (fork_inferior): Call init_thread_list(). * infrun.c (resume): Add pid to invocation of target_resume(). * (wait_for_inferior): Pay attention to pid from target_wait(). Multi-threading code now uses this to determine what to do. * inftarg.c (child_wait): Conditionalize based on CHILD_WAIT macro. Use target_pid_to_str() macro throughout when printing pid. * inferior.h (child_resume): Add pid to prototype. * hppab-nat.c hppah-nat.c infptrace.c (child_resume): Pass in pid as argument, instead of using inferior_pid. * procfs.c (procfs_resume): Pass in pid as argument. Ignored for now. Use target_pid_to_str() macro throughout for printing process id. * remote-adapt.c (adapt_resume): Pass in pid as argument. * remote-eb.c (eb_resume): Pass in pid as argument. * remote-es.c (es1800_resume): Pass in pid as argument. * remote-hms.c (hms_resume): Pass in pid as argument. * remote-mips.c (mips_resume): Pass in pid as argument. * remote-mm.c (mm_resume): Pass in pid as argument. * remote-monitor.c (monitor_resume): Pass in pid as argument. * remote-nindy.c (nindy_resume): Pass in pid as argument. * remote-sa.sparc.c (remote_resume): Pass in pid as argument. * remote-sim.c (rem_resume): Pass in pid as argument. * remote-sp64sim.c (simif_resume): Pass in pid as argument. * remote-st.c (st2000_resume): Pass in pid as argument. * remote-udi.c (udi_resume): Pass in pid as argument. * remote-vx.c (vx_resume): Pass in pid as argument. * remote-z8k.c (rem_resume): Pass in pid as argument. * remote.c (remote_resume): Pass in pid as argument. * solib.c (solid_create_inferior_hook): Pass inferior_pid to target_resume(). * target.c (normal_pid_to_str): New routine to print out process ID normally. * target.h (struct target_ops): Add pid to prototype at to_resume(). (target_resume): Add pid argument. * (target_pid_to_str): Default definition for normal type pids. * thread.c, thread.c: New modules for multi thread/process control.
1993-08-02 06:25:36 +00:00
top.o: top.c top.h $(bfd_h) $(getopt_h) $(readline_headers) call-cmds.h \
$(defs_h) $(gdbcmd_h) $(inferior_h) language.h signals.h \
$(remote_utils_h) gdb_string.h
1993-06-23 22:59:35 +00:00
typeprint.o: typeprint.c $(defs_h) $(expression_h) $(gdbcmd_h) \
$(gdbcore_h) $(gdbtypes_h) language.h $(symtab_h) target.h \
$(value_h) gdb_string.h
1993-06-23 22:59:35 +00:00
ultra3-nat.o: ultra3-nat.c $(defs_h) $(gdbcore_h) $(inferior_h)
ultra3-xdep.o: ultra3-xdep.c $(defs_h) $(gdbcore_h) $(inferior_h)
umax-xdep.o: umax-xdep.c $(defs_h) $(gdbcore_h) $(inferior_h)
1993-06-23 22:59:35 +00:00
utils.o: utils.c $(bfd_h) $(defs_h) $(expression_h) $(gdbcmd_h) \
language.h signals.h target.h terminal.h $(readline_headers) \
gdb_string.h
1993-06-23 22:59:35 +00:00
valarith.o: valarith.c $(bfd_h) $(defs_h) $(expression_h) \
$(gdbtypes_h) language.h $(symtab_h) target.h $(value_h) \
gdb_string.h
1993-06-24 23:16:00 +00:00
valops.o: valops.c $(defs_h) $(gdbcore_h) $(inferior_h) target.h \
gdb_string.h
1993-06-24 23:16:00 +00:00
1993-06-23 22:59:35 +00:00
valprint.o: valprint.c $(defs_h) $(expression_h) $(gdbcmd_h) \
$(gdbcore_h) $(gdbtypes_h) language.h $(symtab_h) target.h \
$(value_h) gdb_string.h valprint.h
1993-06-23 22:59:35 +00:00
values.o: values.c $(defs_h) $(expression_h) $(frame_h) $(gdbcmd_h) \
$(gdbcore_h) $(gdbtypes_h) $(symtab_h) target.h $(value_h) \
* core-aout.c (fetch_core_registers): Cast core_reg_size to int before testing against reg_ptr. * eval.c (evaluate_subexp_standard): Cast type of TYPE_FN_FIELD_VOFFSET to int. * findvar.c (extract_signed_integer, extract_unsigned_integer, extract_long_unsigned_integer): Cast type of sizeof to int. * values.c (unpack_field_as_long, modify_field): Ditto. * valops.c (value_assign, call_function_by_hand): Ditto. * infcmd.c (do_registers_info): Ditto. * ser-tcp.c (tcp_open): Ditto * remote.c (putpkt): Ditto. * dcache.c (dcache_peek): Ditto. * dcache.c (dcache_poke): Ditto. * m2-exp.y (yylex): Ditto. * gnu-regex.c (re_match_2): Ditto. * f-lang.c (ADD_BF_SYMNUM, saved_bf_list_end, tmp_bf_ptr): Ifdef out unused macro definition and variables. * inftarg.c (proc_wait): Move from main.c to here, and make static. * valprint.c (val_print_string): Change bufsize from int to unsigned. * main.c (wait.h): Include * top.c (command_line_input): Remove unused variable "c". * f-typeprint.c (f_type_print_varspec_prefix): Add missing enum value TYPE_CODE_TYPEDEF to switch statement. (f_type_print_varspec_suffix): Add missing enum value TYPE_CODE_TYPEDEF to switch statement. * ch-exp.c (parse_primval): Add remaining enumeration values to switch statement, with no specific action. (ch_lex): Add LOC_UNRESOLVED in switch statement. (pushback_token): Ifdef out, since code using it is ifdef'd out. * stabsread.c (cleanup_undefined_types): Remove unused label "badtype". * objfiles.h (print_symbol_bcache_statistics): Add prototype. * maint.c (objfiles.h): Include. (maintenance_print_statistics): Remove unused variable "temp". * minsyms.c (lookup_minimal_symbol_solib_trampoline): Remove unused variable "found_file_symbol". * m2-exp.y (yylex): Add LOC_UNRESOLVED case to switch. * language.c (lang_bool_type): Use existing function local type variable rather than create block local variables. * solib.c (disable_break): Enclose in ifndef SVR4_SHARED_LIBS. * infptrace.c (wait.h, command.h): Include. * ser-tcp.c (gdb_string.h): Include * i386-tdep.c (codestream_seek): Change "place" to CORE_ADDR. (i386_get_frame_setup): Change "pc" from int to CORE_ADDR. * command.c (complete_on_enum): Make assignment used as truth value explictly check against NULL. (wait.h): Include. * infrun.c (wait_for_inferior): Ifdef out prologue_pc since code that uses it is ifdef'd out. * parser-defs.h: Add prototype for write_dollar_variable. * infrun.c: Add prototype for write_pc_pid. * breakpoint.h: Add prototype for re_enable_breakpoints_in_shlibs. * symmisc.c (bcache.h): Include. * bcache.h: Add prototype for print_bcache_statistics. * symfile.c: Include <time.h>. * printcmd.c (print_scalar_formatted): Change len to unsigned int. * valarith.c (value_equal): Cast result of TYPE_LENGTH to int. * valarith.c (value_binop): Change result_len, promoted_len1, and promoted_len2 to unsigned int. * valarith.c (value_subscripted_rvalue): Change elt_offs and elt_size to unsigned int. * valops.c (value_array): Change typelength to unsigned int. (destructor_name_p): Change len to unsigned int. * scm-lang.h (scm_parse): Add prototype for scm_unpack. * symfile.c (decrement_reading_symtab): Change return type to void. * valarith.c (value_subscript): Remove unused variable "word". (value_subscript): Remove unused variable "tint". * valops.c (auto_abandon): Ifdef out, since code using it is also ifdef'd out. * eval.c (init_array_element): Remove unused variable "val". * Makefile.in (values.o): Depends on scm-lang.h. (command.o): Depends upon wait_h. (ser-tcp.o): Depends upon gdb_string.h. (infptrace.o): Depends upon wait_h and command_h. (maint.o): Depends on objfiles.h and symfile.h. * values.c (allocate_repeat_value): Remove unused variable "element_type". (scm-lang.h): Include. * breakpoint.c (create_longjmp_breakpoint): Enclose in GET_LONGJMP_TARGET define, unused otherwise. * config/i386/nm-linux.h: Add prototypes for i386_insert_watchpoint, i386_remove_watchpoint and i386_stopped_by_watchpoint.
1996-03-30 05:45:10 +00:00
gdb_string.h scm-lang.h
1993-06-23 22:59:35 +00:00
vax-tdep.o: vax-tdep.c $(OP_INCLUDE)/vax.h $(defs_h) $(symtab_h)
1993-06-23 22:59:35 +00:00
w65-tdep.o : w65-tdep.c $(gdbcore_h)
win32-nat.o: win32-nat.c $(gdbcmd_h) $(gdbcore_h) $(inferior_h) $(defs_h) \
gdb_string.h
1993-06-23 22:59:35 +00:00
xdr_ld.o: vx-share/xdr_ld.c $(defs_h) vx-share/vxTypes.h \
vx-share/vxWorks.h vx-share/xdr_ld.h
$(CC) -c $(INTERNAL_CFLAGS) $(srcdir)/vx-share/xdr_ld.c
xdr_ptrace.o: vx-share/xdr_ptrace.c $(defs_h) vx-share/vxTypes.h \
vx-share/vxWorks.h vx-share/xdr_ptrace.h
$(CC) -c $(INTERNAL_CFLAGS) $(srcdir)/vx-share/xdr_ptrace.c
xdr_rdb.o: vx-share/xdr_rdb.c $(defs_h) vx-share/vxTypes.h \
vx-share/vxWorks.h vx-share/xdr_rdb.h
$(CC) -c $(INTERNAL_CFLAGS) $(srcdir)/vx-share/xdr_rdb.c
xcoffread.o: xcoffread.c $(bfd_h) $(INCLUDE_DIR)/aout/stab.def \
$(INCLUDE_DIR)/aout/stab_gnu.h $(INCLUDE_DIR)/coff/internal.h \
$(INCLUDE_DIR)/coff/rs6000.h $(BFD_SRC)/libcoff.h buildsym.h \
complaints.h $(defs_h) $(gdbtypes_h) objfiles.h stabsread.h symfile.h \
$(symtab_h) partial-stab.h gdb_string.h
1993-06-23 22:59:35 +00:00
xcoffsolib.o: xcoffsolib.c $(bfd_h) $(defs_h) xcoffsolib.h
z8k-tdep.o: z8k-tdep.c $(bfd_h) $(dis-asm_h) $(defs_h) $(frame_h) \
$(gdbcmd_h) $(gdbtypes_h) $(symtab_h) $(gdbcore_h)
1993-06-23 22:59:35 +00:00
c-exp.tab.o: c-exp.tab.c c-lang.h $(defs_h) $(expression_h) \
$(gdbtypes_h) language.h parser-defs.h $(symtab_h) $(value_h) \
$(bfd_h) objfiles.h symfile.h
1993-06-23 22:59:35 +00:00
f-exp.tab.o: f-exp.tab.c f-lang.h $(defs_h) $(expression_h) \
language.h parser-defs.h $(value_h) $(bfd_h) objfiles.h symfile.h
1993-06-23 22:59:35 +00:00
m2-exp.tab.o: m2-exp.tab.c $(defs_h) $(expression_h) $(gdbtypes_h) \
language.h m2-lang.h parser-defs.h $(symtab_h) $(value_h) \
$(bfd_h) objfiles.h symfile.h
1993-06-23 22:59:35 +00:00
### end of the gdb Makefile.in.