mirror of
https://github.com/qmk/qmk_firmware
synced 2024-11-15 08:25:01 +00:00
fced377ac0
* Branch point for 2020 May 30 Breaking Change * Migrate `ACTION_LAYER_TOGGLE` to `TG()` (#8954) * Migrate `ACTION_MODS_ONESHOT` to `OSM()` (#8957) * Migrate `ACTION_DEFAULT_LAYER_SET` to `DF()` (#8958) * Migrate `ACTION_LAYER_MODS` to `LM()` (#8959) * Migrate `ACTION_MODS_TAP_KEY` to `MT()` (#8968) * Convert V-USB usbdrv to a submodule (#8321) * Unify Tap Hold functions and documentation (#8348) * Changing board names to prevent confusion (#8412) * Move the Keyboardio Model01 to a keyboardio/ subdir (#8499) * Move spaceman keyboards (#8830) * Migrate miscellaneous `fn_actions` entries (#8977) * Migrate `ACTION_MODS_KEY` to chained mod keycodes (#8979) * Organizing my keyboards (plaid, tartan, ergoinu) (#8537) * Refactor Lily58 to use split_common (#6260) * Refactor zinc to use split_common (#7114) * Add a message if bin/qmk doesn't work (#9000) * Fix conflicting types for 'tfp_printf' (#8269) * Fixed RGB_DISABLE_AFTER_TIMEOUT to be seconds based & small internals cleanup (#6480) * Refactor and updates to TKC1800 code (#8472) * Switch to qmk forks for everything (#9019) * audio refactor: replace deprecated PLAY_NOTE_ARRAY (#8484) * Audio enable corrections (2/3) (#8903) * Split HHKB to ANSI and JP layouts and Add VIA support for each (#8582) * Audio enable corrections (Part 4) (#8974) * Fix typo from PR7114 (#9171) * Augment future branch Changelogs (#8978) * Revert "Branch point for 2020 May 30 Breaking Change"
104 lines
3.3 KiB
C
104 lines
3.3 KiB
C
/*
|
|
Copyright 2012 Jun Wako <wakojun@gmail.com>
|
|
|
|
This program is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 2 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#pragma once
|
|
|
|
#include "config_common.h"
|
|
|
|
/* USB Device descriptor parameter */
|
|
#define VENDOR_ID 0x4848 // HH = happy hacking
|
|
#define PRODUCT_ID 0x0002 // HHKB JP
|
|
#define DEVICE_VER 0x0104
|
|
#define MANUFACTURER q.m.k
|
|
#define PRODUCT HHKB mod
|
|
#define DESCRIPTION q.m.k keyboard firmware for HHKB
|
|
|
|
/* key matrix size */
|
|
#define MATRIX_ROWS 16
|
|
#define MATRIX_COLS 8
|
|
|
|
#define TAPPING_TERM 200
|
|
|
|
/* number of backlight levels */
|
|
#define BACKLIGHT_LEVELS 3
|
|
|
|
/* Set 0 if debouncing isn't needed */
|
|
#define DEBOUNCE 5
|
|
|
|
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
|
//#define LOCKING_SUPPORT_ENABLE
|
|
/* Locking resynchronize hack */
|
|
//#define LOCKING_RESYNC_ENABLE
|
|
|
|
#ifdef HHKB_RN42_ENABLE
|
|
// rn42 support -- acquired from the tmk repo. This is almost certainly not
|
|
// integrated with qmk in the correct way.
|
|
|
|
#define SUART_OUT_PORT PORTD
|
|
#define SUART_OUT_BIT 0
|
|
#define SUART_IN_PIN PIND
|
|
#define SUART_IN_BIT 1
|
|
|
|
#ifdef __AVR_ATmega32U4__
|
|
/* iom32u4.h has no definition of UCSR1D. copy from iom32u2.h */
|
|
#define UCSR1D _SFR_MEM8(0xCB)
|
|
#define RTSEN 0
|
|
#define CTSEN 1
|
|
|
|
#define SERIAL_UART_BAUD 115200
|
|
#define SERIAL_UART_DATA UDR1
|
|
#define SERIAL_UART_UBRR ((F_CPU/(16.0*SERIAL_UART_BAUD)-1+0.5))
|
|
#define SERIAL_UART_RXD_VECT USART1_RX_vect
|
|
#define SERIAL_UART_TXD_READY (UCSR1A&(1<<UDRE1))
|
|
#define SERIAL_UART_INIT() do { \
|
|
UBRR1L = (uint8_t) SERIAL_UART_UBRR; /* baud rate */ \
|
|
UBRR1H = ((uint16_t)SERIAL_UART_UBRR>>8); /* baud rate */ \
|
|
UCSR1B |= (1<<RXCIE1) | (1<<RXEN1); /* RX interrupt, RX: enable */ \
|
|
UCSR1B |= (0<<TXCIE1) | (1<<TXEN1); /* TX interrupt, TX: enable */ \
|
|
UCSR1C |= (0<<UPM11) | (0<<UPM10); /* parity: none(00), even(01), odd(11) */ \
|
|
UCSR1D |= (0<<RTSEN) | (0<<CTSEN); /* RTS, CTS(no flow control by hardware) */ \
|
|
DDRD |= (1<<5); PORTD &= ~(1<<5); /* RTS for flow control by firmware */ \
|
|
sei(); \
|
|
} while(0)
|
|
#define SERIAL_UART_RTS_LO() do { PORTD &= ~(1<<5); } while (0)
|
|
#define SERIAL_UART_RTS_HI() do { PORTD |= (1<<5); } while (0)
|
|
#else
|
|
#error "USART configuration is needed."
|
|
#endif
|
|
|
|
/* power control of key switch board */
|
|
#define HHKB_POWER_SAVING
|
|
|
|
#endif
|
|
|
|
/*
|
|
* Feature disable options
|
|
* These options are also useful to firmware size reduction.
|
|
*/
|
|
|
|
/* disable debug print */
|
|
//#define NO_DEBUG
|
|
|
|
/* disable print */
|
|
//#define NO_PRINT
|
|
|
|
/* disable action features */
|
|
//#define NO_ACTION_LAYER
|
|
//#define NO_ACTION_TAPPING
|
|
//#define NO_ACTION_ONESHOT
|
|
//#define NO_ACTION_MACRO
|
|
//#define NO_ACTION_FUNCTION
|