qmk_firmware/keyboards/kmini
Ryan 99b35940bc
Remove unnecessary backslash-escapes in default keymaps (#15472)
* Remove unnecessary backslash-escapes in default keymaps

* Remove unnecessary backslash-escapes in via keymaps

* Remove unnecessary backslash-escapes in default-ish keymaps
2021-12-14 12:41:16 +00:00
..
keymaps/default Remove unnecessary backslash-escapes in default keymaps (#15472) 2021-12-14 12:41:16 +00:00
config.h Change keyboard level include guards to pragma once (#14248) 2021-09-01 19:03:14 +10:00
info.json Remove width, height and key_count from info.json (#14274) 2021-09-12 14:04:56 +10:00
kmini.c Remove empty override functions (#14312) 2021-09-05 21:36:31 +01:00
kmini.h Change keyboard level include guards to pragma once (#14248) 2021-09-01 19:03:14 +10:00
matrix.c Remove legacy print backward compatiblitly (#11805) 2021-02-06 16:56:13 +00:00
readme.md
rules.mk Tidy up NKRO_ENABLE rules (#15382) 2021-12-09 16:05:44 +11:00

Kmini keyboard firmware

The Revo Kmini is a 65% keyboard with an additional two columns on the left. It is programmed with the 'KMAC key map', which only works on Windows and according to a user it cannot map media controls or change the capslock key.

Hardware

Columns 0, 1 and 10-16 and rows 0-4 are wired directly to the ATmega32u4, and columns 2-9 are wired to the 74HC237D demultiplexer. Capslock is on E2 and also triggers a reset if held when plugging the cable in. There are three possible places for leds, which are the capslock key and the two keys above the right arrow key. All three of them are individually controllable. The ATmega32u4 runs on an external crystal on 8mhz, so you'll have to change the bitclock on the ISP programmer if you're unable to read or write the chip.

How to build

Please read the documentation.

How to flash

Hold the capslock key while plugging in the USB and flash the .hex file using QMK Toolbox or Atmel FLIP.