qmk_firmware/keyboards/ploopyco/trackball
2024-05-17 23:49:29 +01:00
..
keymaps Delete trivial keymap readmes (#23714) 2024-05-17 23:49:29 +01:00
rev1 Migrate build target markers to keyboard.json (#23293) 2024-03-30 11:31:50 +00:00
rev1_005 Migrate build target markers to keyboard.json (#23293) 2024-03-30 11:31:50 +00:00
config.h [Keyboard] Overhaul ploopyco devices (#22967) 2024-03-14 22:15:44 -07:00
info.json [Keyboard] Overhaul ploopyco devices (#22967) 2024-03-14 22:15:44 -07:00
readme.md [Keyboard] Overhaul ploopyco devices (#22967) 2024-03-14 22:15:44 -07:00
rules.mk [Keyboard] Overhaul ploopyco devices (#22967) 2024-03-14 22:15:44 -07:00

Ploopyco Trackball

Ploopyco Trackball

It's a DIY, QMK Powered Trackball!!!!

Make example for this keyboard (after setting up your build environment):

make ploopyco/trackball/rev1:default:flash
make ploopyco/trackball/rev1_005:default:flash

To jump to the bootloader, hold down "Button 4" (immediate right of the trackball)

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Revisions

There are two main revisions for the PloopyCo Trackball, everything up to 1.004, and 1.005-1.006.

In the 1.005 revision, button for was changed from pin B5 to B6, and the debug LED pin was changed from F7 to B5.

The PCB should indicate which revision this is.

Customizing your PloopyCo Trackball

You can find customziation options here.