mirror of
https://github.com/qmk/qmk_firmware
synced 2024-11-19 19:54:47 +00:00
93 lines
2.9 KiB
C
93 lines
2.9 KiB
C
/* Copyright 2021 Jessica Sullivan and Don Kjer
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#pragma once
|
|
|
|
#include "config_common.h"
|
|
|
|
/* USB Device descriptor parameter */
|
|
#define VENDOR_ID 0xD60D
|
|
#define MANUFACTURER Hoksi Technology
|
|
|
|
/* COL2ROW, ROW2COL*/
|
|
#define DIODE_DIRECTION ROW2COL
|
|
|
|
// Dynamic EEPROM
|
|
// Something sensible or else VIA may crash
|
|
// Users may enable more if they wish
|
|
#define DYNAMIC_KEYMAP_EEPROM_MAX_ADDR 4095
|
|
|
|
// Increase VIA layer count
|
|
#define DYNAMIC_KEYMAP_LAYER_COUNT 16
|
|
|
|
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
|
|
#define DEBOUNCE 5
|
|
|
|
/* Bootmagic Lite key configuration */
|
|
#define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE
|
|
#define BOOTMAGIC_LITE_ROW 0
|
|
#define BOOTMAGIC_LITE_COLUMN 0
|
|
|
|
/* LED indicator pins */
|
|
#define LED_CAPS_LOCK_PIN C4
|
|
#define LED_WIN_LOCK_PIN C5
|
|
#define LED_SCROLL_LOCK_PIN A8
|
|
#define LED_MR_LOCK_PIN LED_SCROLL_LOCK_PIN
|
|
#define LED_PIN_ON_STATE 0
|
|
|
|
#ifdef RGB_MATRIX_ENABLE
|
|
// This is a 7-bit address, that gets left-shifted and bit 0
|
|
// set to 0 for write, 1 for read (as per I2C protocol)
|
|
// The address will vary depending on your wiring:
|
|
// 00 <-> GND
|
|
// 01 <-> SCL
|
|
// 10 <-> SDA
|
|
// 11 <-> VCC
|
|
// ADDR1 represents A1:A0 of the 7-bit address.
|
|
// ADDR2 represents A3:A2 of the 7-bit address.
|
|
// The result is: 0b101(ADDR2)(ADDR1)
|
|
|
|
#define DRIVER_ADDR_1 0b1010000
|
|
#define DRIVER_ADDR_2 0b1010011
|
|
|
|
#define DRIVER_COUNT 2
|
|
#define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)
|
|
|
|
/* I2C Alternate function settings */
|
|
#define I2C1_SCL_PAL_MODE 1
|
|
#define I2C1_SDA_PAL_MODE 1
|
|
|
|
/* Set I2C speed to 400kHz, 300ns Tr, 14ns Tf */
|
|
#define I2C1_TIMINGR_PRESC 0x1U
|
|
#define I2C1_TIMINGR_SCLDEL 0x9U
|
|
#define I2C1_TIMINGR_SDADEL 0x0U
|
|
#define I2C1_TIMINGR_SCLH 0x0cU
|
|
#define I2C1_TIMINGR_SCLL 0x22U
|
|
|
|
# define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
|
|
# define RGB_MATRIX_FRAMEBUFFER_EFFECTS
|
|
# define RGB_MATRIX_KEYPRESSES
|
|
# define RGB_MATRIX_LED_PROCESS_LIMIT 4
|
|
# define RGB_MATRIX_LED_FLUSH_LIMIT 26
|
|
|
|
# define DISABLE_RGB_MATRIX_HUE_BREATHING
|
|
# define DISABLE_RGB_MATRIX_HUE_PENDULUM
|
|
# define DISABLE_RGB_MATRIX_HUE_WAVE
|
|
|
|
// This allows VIA to control RGB Matrix settings in the 'Lighting' section.
|
|
#define VIA_QMK_RGBLIGHT_ENABLE
|
|
|
|
#endif /* RGB_MATRIX_ENABLE */
|