qmk_firmware/common_features.mk
James Young 1646c0f26c
2021 May 29 Breaking Changes Update (#13034)
* Add Per Key functionality for AutoShift (#11536)

* LED Matrix: Reactive effect buffers & advanced indicators (#12588)

* [Keyboard] kint36: switch to sym_eager_pk debouncing (#12626)

* [Keyboard] kint2pp: reduce input latency by ≈10ms (#12625)

* LED Matrix: Split (#12633)

* [CI] Format code according to conventions (#12650)

* feat: infinite timeout for leader key (#6580)

* feat: implement leader_no_timeout logic

* docs(leader_key): infinite leader timeout docs

* Format code according to conventions (#12680)

* Update ADC driver for STM32F1xx, STM32F3xx, STM32F4xx (#12403)

* Fix default ADC_RESOLUTION for ADCv3 (and ADCv4)

Recent ChibiOS update removed ADC_CFGR1_RES_10BIT from the ADCv3 headers
(that macro should not have been there, because ADCv3 has CFGR instead of
CFGR1).  Fix the default value for ADC_RESOLUTION to use ADC_CFGR_RES_10BITS
if it is defined (that name is used for ADCv3 and ADCv4).

* Update ADC docs to match the actually used resolution

ADC driver for ChibiOS actually uses the 10-bit resolution by default
(probably to match AVR); fix the documentation accordingly.  Also add
both ADC_CFGR_RES_10BITS and ADC_CFGR1_RES_10BIT constants (these names
differ according to the ADC implementation in the particular MCU).

* Fix pinToMux() for B12 and B13 on STM32F3xx

Testing on STM32F303CCT6 revealed that the ADC mux values for B12 and
B13 pins were wrong.

* Add support for all possible analog pins on STM32F1xx

Added ADC mux values for pins A0...A7, B0, B1, C0...C5 on STM32F1xx
(they are the same at least for STM32F103x8 and larger F103 devices, and
also F102, F105, F107 families).  Actually tested on STM32F103C8T6
(therefore pins C0...C5 were not tested).

Pins F6...F10, which are present on STM32F103x[C-G] in 144-pin packages,
cannot be supported at the moment, because those pins are connected only
to ADC3, but the ChibiOS ADC driver for STM32F1xx supports only ADC1.

* Add support for all possible analog pins on STM32F4xx

Added ADC mux values for pins A0...A7, B0, B1, C0...C5 and optionally
F3...F10 (if STM32_ADC_USE_ADC3 is enabled).  These mux values are
apparently the same for all F4xx devices, except some smaller devices may
not have ADC3.

Actually tested on STM32F401CCU6, STM32F401CEU6, STM32F411CEU6 (using
various WeAct “Blackpill” boards); only pins A0...A7, B0, B1 were tested.

Pins F3...F10 are inside `#if STM32_ADC_USE_ADC3` because some devices
which don't have ADC3 also don't have the GPIOF port, therefore the code
which refers to Fx pins does not compile.

* Fix STM32F3xx ADC mux table in documentation

The ADC driver documentation had some errors in the mux table for STM32F3xx.
Fix this table to match the datasheet and the actual code (mux settings for
B12 and B13 were also tested on a real STM32F303CCT6 chip).

* Add STM32F1xx ADC pins to the documentation

* Add STM32F4xx ADC pins to the documentation

* Add initial support for tinyuf2 bootloader (when hosted on F411 blackpill) (#12600)

* Add support for jumping to tinyuf2 bootloader. Adds blackpill UF2 example.

* Update flashing.md

* Update chconf.h

* Update config.h

* Update halconf.h

* Update mcuconf.h

* eeprom driver: Refactor where eeprom driver initialisation (and EEPROM emulation initialisation) occurs to make it non-target-specific. (#12671)

* Add support for MCU = STM32F446 (#12619)

* Add support for MCU = STM32F446

* Update platforms/chibios/GENERIC_STM32_F446XE/configs/config.h

* Restore mcuconf.h to the one used by RT-STM32F446RE-NUCLEO64

* stm32f446: update mcuconf.h and board.h for 16MHz operation, with USB enabled, and other peripherals disabled.

* Format code according to conventions (#12682)

* Format code according to conventions (#12687)

* Add STM32L433 and L443 support (#12063)

* initial L433 commit

* change to XC

* fix L433

* disable all peripherals

* update system and peripheral clocks

* 433 change

* use its own board  files

* revert its own board files

* l433 specific change

* fix stm32l432xx define

* remove duplicate #define

* fix bootloader jump

* move to L443xx and add i2c2, spi2, usart3 to mcuconf.h

* move to L443

* move to L443

* fix sdmmc in mcuconf.h

* include STM32L443

* add L443

* Include L443 in compatible microcontrollers

* Include L443 in compatible microcontrollers

* Update config bootloader jump description

* Update ChibiOS define reasoning

* Update quantum/mcu_selection.mk

* fix git conflict

* Updated Function96 with V2 files and removed chconf.h and halconf.h (#12613)

* Fix bad PR merge for #6580. (#12721)

* Change RGB/LED Matrix to use a simple define for USB suspend (#12697)

* [CI] Format code according to conventions (#12731)

* Fixing transport's led/rgb matrix suspend state logic (#12770)

* [CI] Format code according to conventions (#12772)

* Fix comment parsing (#12750)

* Added OLED fade out support (#12086)

* fix some references to bin/qmk that slipped in (#12832)

* Resolve a number of warnings in `qmk generate-api` (#12833)

* New command: qmk console (#12828)

* stash poc

* stash

* tidy up implementation

* Tidy up slightly for review

* Tidy up slightly for review

* Bodge environment to make tests pass

* Refactor away from asyncio due to windows issues

* Filter devices

* align vid/pid printing

* Add hidapi to the installers

* start preparing for multiple hid_listeners

* udev rules for hid_listen

* refactor to move closer to end state

* very basic implementation of the threaded model

* refactor how vid/pid/index are supplied and parsed

* windows improvements

* read the report directly when usage page isn't available

* add per-device colors, the choice to show names or numbers, and refactor

* add timestamps

* Add support for showing bootloaders

* tweak the color for bootloaders

* Align bootloader disconnect with connect color

* add support for showing all bootloaders

* fix the pyusb check

* tweaks

* fix exception

* hide a stack trace behind -v

* add --no-bootloaders option

* add documentation for qmk console

* Apply suggestions from code review

* pyformat

* clean up and flesh out KNOWN_BOOTLOADERS

* Remove pointless SERIAL_LINK_ENABLE rules (#12846)

* Make Swap Hands use PROGMEM (#12284)

This converts the array that the Swap Hands feature uses to use PROGMEM,
and to read from that array, as such. Since this array never changes at
runtime, there is no reason to keep it in memory. Especially for AVR
boards, as memory is a precious resource.

* Fix another bin/qmk reference (#12856)

* [Keymap] Turn OLED off on suspend in soundmonster keymap (#10419)

* Fixup build errors on `develop` branch. (#12723)

* LED Matrix: Effects! (#12651)

* Fix syntax error when compiling for ARM (#12866)

* Remove KEYMAP and LAYOUT_kc (#12160)

* alias KEYMAP to LAYOUT

* remove KEYMAP and LAYOUT_kc

* Add setup, clone, and env to the list of commands we allow even with broken modules (#12868)

* Rename `point_t` -> `led_point_t` (#12864)

* [Keyboard] updated a vendor name / fixed minor keymap issues (#12881)

* Add missing LED Matrix suspend code to suspend.c (#12878)

* LED Matrix: Documentation (#12685)

* Deprecate `send_unicode_hex_string()` (#12602)

* Fix spelling mistake regarding LED Matrix in split_common. (#12888)

* [Keymap] Fix QWERTY/DVORAK status output for kzar keymap (#12895)

* Use milc.subcommand.config instead of qmk.cli.config (#12915)

* Use milc.subcommand.config instead

* pyformat

* remove the config test

* Add function to allow repeated blinking of one layer (#12237)

* Implement function rgblight_blink_layer_repeat to allow repeated blinking of one layer at a time

* Update doc

* Rework rgblight blinking according to requested change

* optimize storage

* Fixup housekeeping from being invoked twice per loop. (#12933)

* matrix: wait for row signal to go HIGH for every row (#12945)

I noticed this discrepancy (last row of the matrix treated differently than the
others) when optimizing the input latency of my keyboard controller, see also
https://michael.stapelberg.ch/posts/2021-05-08-keyboard-input-latency-qmk-kinesis/

Before this commit, when tuning the delays I noticed ghost key presses when
pressing the F2 key, which is on the last row of the keyboard matrix: the
dead_grave key, which is on the first row of the keyboard matrix, would be
incorrectly detected as pressed.

After this commit, all keyboard matrix rows are interpreted correctly.

I suspect that my setup is more susceptible to this nuance than others because I
use GPIO_INPUT_PIN_DELAY=0 and hence don’t have another delay that might mask
the problem.

* ensure we do not conflict with existing keymap aliases (#12976)

* Add support for up to 4 IS31FL3733 drivers (#12342)

* Convert Encoder callbacks to be boolean functions (#12805)

* [Keyboard] Fix Terrazzo build failure (#12977)

* Do not hard set config in CPTC files (#11864)

* [Keyboard] Corne - Remove legacy revision support (#12226)

* [Keymap] Update to Drashna keymap and user code (based on develop) (#12936)

* Add Full-duplex serial driver for ARM boards (#9842)

* Document LED_MATRIX_FRAMEBUFFER_EFFECTS (#12987)

* Backlight: add defines for default level and breathing state (#12560)

* Add dire message about LUFA mass storage bootloader (#13014)

* [Keyboard] Remove redundant legacy and common headers for crkbd (#13023)

Was causing compiler errors on some systems.

* Fix keyboards/keymaps for boolean encoder callback changes (#12985)

* `backlight.c`: include `eeprom.h` (#13024)

* Add changelog for 2021-05-29 Breaking Changes merge (#12939)

* Add ChangeLog for 2021-05-29 Breaking Changes Merge: initial version

* Add recent develop changes

* Sort recent develop changes

* Remove sections for ChibiOS changes per tzarc

No ChibiOS changes this round.

* Add and sort recent develop changes

* add notes about keyboard moves/deletions

* import changelog for PR 12172

Documents the change to BOOTMAGIC_ENABLE.

* update section headings

* re-sort changelog

* add additional note regarding Bootmagic changes

* remove changelog timestamp

* update dates in main Breaking Changes docs

* fix broken section anchors in previous changelogs

* add link to backlight/eeprom patch to changelog

* highlight some more changes

* link PRs from section headers

* Restore standard readme

* run: qmk cformat --core-only
2021-05-29 14:38:50 -07:00

696 lines
22 KiB
Makefile

# Copyright 2017 Fred Sundvik
#
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
SERIAL_PATH := $(QUANTUM_PATH)/serial_link
QUANTUM_SRC += \
$(QUANTUM_DIR)/quantum.c \
$(QUANTUM_DIR)/send_string.c \
$(QUANTUM_DIR)/bitwise.c \
$(QUANTUM_DIR)/led.c \
$(QUANTUM_DIR)/keymap_common.c \
$(QUANTUM_DIR)/keycode_config.c
ifeq ($(strip $(DEBUG_MATRIX_SCAN_RATE_ENABLE)), yes)
OPT_DEFS += -DDEBUG_MATRIX_SCAN_RATE
CONSOLE_ENABLE = yes
else ifeq ($(strip $(DEBUG_MATRIX_SCAN_RATE_ENABLE)), api)
OPT_DEFS += -DDEBUG_MATRIX_SCAN_RATE
endif
ifeq ($(strip $(API_SYSEX_ENABLE)), yes)
OPT_DEFS += -DAPI_SYSEX_ENABLE
OPT_DEFS += -DAPI_ENABLE
MIDI_ENABLE=yes
SRC += $(QUANTUM_DIR)/api/api_sysex.c
SRC += $(QUANTUM_DIR)/api.c
endif
ifeq ($(strip $(COMMAND_ENABLE)), yes)
SRC += $(QUANTUM_DIR)/command.c
OPT_DEFS += -DCOMMAND_ENABLE
endif
AUDIO_ENABLE ?= no
ifeq ($(strip $(AUDIO_ENABLE)), yes)
ifeq ($(PLATFORM),CHIBIOS)
AUDIO_DRIVER ?= dac_basic
ifeq ($(strip $(AUDIO_DRIVER)), dac_basic)
OPT_DEFS += -DAUDIO_DRIVER_DAC
else ifeq ($(strip $(AUDIO_DRIVER)), dac_additive)
OPT_DEFS += -DAUDIO_DRIVER_DAC
## stm32f2 and above have a usable DAC unit, f1 do not, and need to use pwm instead
else ifeq ($(strip $(AUDIO_DRIVER)), pwm_software)
OPT_DEFS += -DAUDIO_DRIVER_PWM
else ifeq ($(strip $(AUDIO_DRIVER)), pwm_hardware)
OPT_DEFS += -DAUDIO_DRIVER_PWM
endif
else
# fallback for all other platforms is pwm
AUDIO_DRIVER ?= pwm_hardware
OPT_DEFS += -DAUDIO_DRIVER_PWM
endif
OPT_DEFS += -DAUDIO_ENABLE
MUSIC_ENABLE = yes
SRC += $(QUANTUM_DIR)/process_keycode/process_audio.c
SRC += $(QUANTUM_DIR)/process_keycode/process_clicky.c
SRC += $(QUANTUM_DIR)/audio/audio.c ## common audio code, hardware agnostic
SRC += $(QUANTUM_DIR)/audio/driver_$(PLATFORM_KEY)_$(strip $(AUDIO_DRIVER)).c
SRC += $(QUANTUM_DIR)/audio/voices.c
SRC += $(QUANTUM_DIR)/audio/luts.c
endif
ifeq ($(strip $(SEQUENCER_ENABLE)), yes)
OPT_DEFS += -DSEQUENCER_ENABLE
MUSIC_ENABLE = yes
SRC += $(QUANTUM_DIR)/sequencer/sequencer.c
SRC += $(QUANTUM_DIR)/process_keycode/process_sequencer.c
endif
ifeq ($(strip $(MIDI_ENABLE)), yes)
OPT_DEFS += -DMIDI_ENABLE
MUSIC_ENABLE = yes
SRC += $(QUANTUM_DIR)/process_keycode/process_midi.c
endif
MUSIC_ENABLE ?= no
ifeq ($(MUSIC_ENABLE), yes)
SRC += $(QUANTUM_DIR)/process_keycode/process_music.c
endif
ifeq ($(strip $(STENO_ENABLE)), yes)
OPT_DEFS += -DSTENO_ENABLE
VIRTSER_ENABLE ?= yes
SRC += $(QUANTUM_DIR)/process_keycode/process_steno.c
endif
ifeq ($(strip $(VIRTSER_ENABLE)), yes)
OPT_DEFS += -DVIRTSER_ENABLE
endif
ifeq ($(strip $(MOUSEKEY_ENABLE)), yes)
OPT_DEFS += -DMOUSEKEY_ENABLE
OPT_DEFS += -DMOUSE_ENABLE
SRC += $(QUANTUM_DIR)/mousekey.c
endif
ifeq ($(strip $(POINTING_DEVICE_ENABLE)), yes)
OPT_DEFS += -DPOINTING_DEVICE_ENABLE
OPT_DEFS += -DMOUSE_ENABLE
SRC += $(QUANTUM_DIR)/pointing_device.c
endif
VALID_EEPROM_DRIVER_TYPES := vendor custom transient i2c spi
EEPROM_DRIVER ?= vendor
ifeq ($(filter $(EEPROM_DRIVER),$(VALID_EEPROM_DRIVER_TYPES)),)
$(error EEPROM_DRIVER="$(EEPROM_DRIVER)" is not a valid EEPROM driver)
else
OPT_DEFS += -DEEPROM_ENABLE
ifeq ($(strip $(EEPROM_DRIVER)), custom)
OPT_DEFS += -DEEPROM_DRIVER -DEEPROM_CUSTOM
COMMON_VPATH += $(DRIVER_PATH)/eeprom
SRC += eeprom_driver.c
else ifeq ($(strip $(EEPROM_DRIVER)), i2c)
OPT_DEFS += -DEEPROM_DRIVER -DEEPROM_I2C
COMMON_VPATH += $(DRIVER_PATH)/eeprom
QUANTUM_LIB_SRC += i2c_master.c
SRC += eeprom_driver.c eeprom_i2c.c
else ifeq ($(strip $(EEPROM_DRIVER)), spi)
OPT_DEFS += -DEEPROM_DRIVER -DEEPROM_SPI
COMMON_VPATH += $(DRIVER_PATH)/eeprom
QUANTUM_LIB_SRC += spi_master.c
SRC += eeprom_driver.c eeprom_spi.c
else ifeq ($(strip $(EEPROM_DRIVER)), transient)
OPT_DEFS += -DEEPROM_DRIVER -DEEPROM_TRANSIENT
COMMON_VPATH += $(DRIVER_PATH)/eeprom
SRC += eeprom_driver.c eeprom_transient.c
else ifeq ($(strip $(EEPROM_DRIVER)), vendor)
OPT_DEFS += -DEEPROM_VENDOR
ifeq ($(PLATFORM),AVR)
# Automatically provided by avr-libc, nothing required
else ifeq ($(PLATFORM),CHIBIOS)
ifeq ($(MCU_SERIES), STM32F3xx)
SRC += $(PLATFORM_COMMON_DIR)/eeprom_stm32.c
SRC += $(PLATFORM_COMMON_DIR)/flash_stm32.c
OPT_DEFS += -DEEPROM_EMU_STM32F303xC
OPT_DEFS += -DSTM32_EEPROM_ENABLE
else ifeq ($(MCU_SERIES), STM32F1xx)
SRC += $(PLATFORM_COMMON_DIR)/eeprom_stm32.c
SRC += $(PLATFORM_COMMON_DIR)/flash_stm32.c
OPT_DEFS += -DEEPROM_EMU_STM32F103xB
OPT_DEFS += -DSTM32_EEPROM_ENABLE
else ifeq ($(MCU_SERIES)_$(MCU_LDSCRIPT), STM32F0xx_STM32F072xB)
SRC += $(PLATFORM_COMMON_DIR)/eeprom_stm32.c
SRC += $(PLATFORM_COMMON_DIR)/flash_stm32.c
OPT_DEFS += -DEEPROM_EMU_STM32F072xB
OPT_DEFS += -DSTM32_EEPROM_ENABLE
else ifeq ($(MCU_SERIES)_$(MCU_LDSCRIPT), STM32F0xx_STM32F042x6)
# Stack sizes: Since this chip has limited RAM capacity, the stack area needs to be reduced.
# This ensures that the EEPROM page buffer fits into RAM
USE_PROCESS_STACKSIZE = 0x600
USE_EXCEPTIONS_STACKSIZE = 0x300
SRC += $(PLATFORM_COMMON_DIR)/eeprom_stm32.c
SRC += $(PLATFORM_COMMON_DIR)/flash_stm32.c
OPT_DEFS += -DEEPROM_EMU_STM32F042x6
OPT_DEFS += -DSTM32_EEPROM_ENABLE
else ifneq ($(filter $(MCU_SERIES),STM32L0xx STM32L1xx),)
OPT_DEFS += -DEEPROM_DRIVER
COMMON_VPATH += $(DRIVER_PATH)/eeprom
SRC += eeprom_driver.c eeprom_stm32_L0_L1.c
else
# This will effectively work the same as "transient" if not supported by the chip
SRC += $(PLATFORM_COMMON_DIR)/eeprom_teensy.c
endif
else ifeq ($(PLATFORM),ARM_ATSAM)
SRC += $(PLATFORM_COMMON_DIR)/eeprom.c
else ifeq ($(PLATFORM),TEST)
SRC += $(PLATFORM_COMMON_DIR)/eeprom.c
endif
endif
endif
RGBLIGHT_ENABLE ?= no
VALID_RGBLIGHT_TYPES := WS2812 APA102 custom
ifeq ($(strip $(RGBLIGHT_CUSTOM_DRIVER)), yes)
RGBLIGHT_DRIVER ?= custom
endif
ifeq ($(strip $(RGBLIGHT_ENABLE)), yes)
RGBLIGHT_DRIVER ?= WS2812
ifeq ($(filter $(RGBLIGHT_DRIVER),$(VALID_RGBLIGHT_TYPES)),)
$(error RGBLIGHT_DRIVER="$(RGBLIGHT_DRIVER)" is not a valid RGB type)
else
POST_CONFIG_H += $(QUANTUM_DIR)/rgblight_post_config.h
OPT_DEFS += -DRGBLIGHT_ENABLE
SRC += $(QUANTUM_DIR)/color.c
SRC += $(QUANTUM_DIR)/rgblight.c
CIE1931_CURVE := yes
RGB_KEYCODES_ENABLE := yes
endif
ifeq ($(strip $(RGBLIGHT_DRIVER)), WS2812)
WS2812_DRIVER_REQUIRED := yes
endif
ifeq ($(strip $(RGBLIGHT_DRIVER)), APA102)
APA102_DRIVER_REQUIRED := yes
endif
ifeq ($(strip $(RGBLIGHT_DRIVER)), custom)
OPT_DEFS += -DRGBLIGHT_CUSTOM_DRIVER
endif
endif
LED_MATRIX_ENABLE ?= no
VALID_LED_MATRIX_TYPES := IS31FL3731 custom
# TODO: IS31FL3733 IS31FL3737 IS31FL3741
ifeq ($(strip $(LED_MATRIX_ENABLE)), yes)
ifeq ($(filter $(LED_MATRIX_DRIVER),$(VALID_LED_MATRIX_TYPES)),)
$(error "$(LED_MATRIX_DRIVER)" is not a valid matrix type)
endif
OPT_DEFS += -DLED_MATRIX_ENABLE
ifneq (,$(filter $(MCU), atmega16u2 atmega32u2 at90usb162))
# ATmegaxxU2 does not have hardware MUL instruction - lib8tion must be told to use software multiplication routines
OPT_DEFS += -DLIB8_ATTINY
endif
SRC += $(QUANTUM_DIR)/process_keycode/process_backlight.c
SRC += $(QUANTUM_DIR)/led_matrix.c
SRC += $(QUANTUM_DIR)/led_matrix_drivers.c
CIE1931_CURVE := yes
ifeq ($(strip $(LED_MATRIX_DRIVER)), IS31FL3731)
OPT_DEFS += -DIS31FL3731 -DSTM32_I2C -DHAL_USE_I2C=TRUE
COMMON_VPATH += $(DRIVER_PATH)/issi
SRC += is31fl3731-simple.c
QUANTUM_LIB_SRC += i2c_master.c
endif
endif
RGB_MATRIX_ENABLE ?= no
VALID_RGB_MATRIX_TYPES := IS31FL3731 IS31FL3733 IS31FL3737 IS31FL3741 WS2812 custom
ifeq ($(strip $(RGB_MATRIX_ENABLE)), yes)
ifeq ($(filter $(RGB_MATRIX_DRIVER),$(VALID_RGB_MATRIX_TYPES)),)
$(error "$(RGB_MATRIX_DRIVER)" is not a valid matrix type)
endif
OPT_DEFS += -DRGB_MATRIX_ENABLE
ifneq (,$(filter $(MCU), atmega16u2 atmega32u2 at90usb162))
# ATmegaxxU2 does not have hardware MUL instruction - lib8tion must be told to use software multiplication routines
OPT_DEFS += -DLIB8_ATTINY
endif
SRC += $(QUANTUM_DIR)/color.c
SRC += $(QUANTUM_DIR)/rgb_matrix.c
SRC += $(QUANTUM_DIR)/rgb_matrix_drivers.c
CIE1931_CURVE := yes
RGB_KEYCODES_ENABLE := yes
ifeq ($(strip $(RGB_MATRIX_DRIVER)), IS31FL3731)
OPT_DEFS += -DIS31FL3731 -DSTM32_I2C -DHAL_USE_I2C=TRUE
COMMON_VPATH += $(DRIVER_PATH)/issi
SRC += is31fl3731.c
QUANTUM_LIB_SRC += i2c_master.c
endif
ifeq ($(strip $(RGB_MATRIX_DRIVER)), IS31FL3733)
OPT_DEFS += -DIS31FL3733 -DSTM32_I2C -DHAL_USE_I2C=TRUE
COMMON_VPATH += $(DRIVER_PATH)/issi
SRC += is31fl3733.c
QUANTUM_LIB_SRC += i2c_master.c
endif
ifeq ($(strip $(RGB_MATRIX_DRIVER)), IS31FL3737)
OPT_DEFS += -DIS31FL3737 -DSTM32_I2C -DHAL_USE_I2C=TRUE
COMMON_VPATH += $(DRIVER_PATH)/issi
SRC += is31fl3737.c
QUANTUM_LIB_SRC += i2c_master.c
endif
ifeq ($(strip $(RGB_MATRIX_DRIVER)), IS31FL3741)
OPT_DEFS += -DIS31FL3741 -DSTM32_I2C -DHAL_USE_I2C=TRUE
COMMON_VPATH += $(DRIVER_PATH)/issi
SRC += is31fl3741.c
QUANTUM_LIB_SRC += i2c_master.c
endif
ifeq ($(strip $(RGB_MATRIX_DRIVER)), WS2812)
OPT_DEFS += -DWS2812
WS2812_DRIVER_REQUIRED := yes
endif
ifeq ($(strip $(RGB_MATRIX_DRIVER)), APA102)
OPT_DEFS += -DAPA102
APA102_DRIVER_REQUIRED := yes
endif
ifeq ($(strip $(RGB_MATRIX_CUSTOM_KB)), yes)
OPT_DEFS += -DRGB_MATRIX_CUSTOM_KB
endif
ifeq ($(strip $(RGB_MATRIX_CUSTOM_USER)), yes)
OPT_DEFS += -DRGB_MATRIX_CUSTOM_USER
endif
endif
ifeq ($(strip $(RGB_KEYCODES_ENABLE)), yes)
SRC += $(QUANTUM_DIR)/process_keycode/process_rgb.c
endif
ifeq ($(strip $(PRINTING_ENABLE)), yes)
OPT_DEFS += -DPRINTING_ENABLE
SRC += $(QUANTUM_DIR)/process_keycode/process_printer.c
SRC += $(TMK_DIR)/protocol/serial_uart.c
endif
ifeq ($(strip $(SERIAL_LINK_ENABLE)), yes)
SERIAL_SRC := $(wildcard $(SERIAL_PATH)/protocol/*.c)
SERIAL_SRC += $(wildcard $(SERIAL_PATH)/system/*.c)
SERIAL_DEFS += -DSERIAL_LINK_ENABLE
COMMON_VPATH += $(SERIAL_PATH)
SRC += $(patsubst $(QUANTUM_PATH)/%,%,$(SERIAL_SRC))
OPT_DEFS += $(SERIAL_DEFS)
VAPTH += $(SERIAL_PATH)
endif
VARIABLE_TRACE ?= no
ifneq ($(strip $(VARIABLE_TRACE)),no)
SRC += $(QUANTUM_DIR)/variable_trace.c
OPT_DEFS += -DNUM_TRACED_VARIABLES=$(strip $(VARIABLE_TRACE))
ifneq ($(strip $(MAX_VARIABLE_TRACE_SIZE)),)
OPT_DEFS += -DMAX_VARIABLE_TRACE_SIZE=$(strip $(MAX_VARIABLE_TRACE_SIZE))
endif
endif
ifeq ($(strip $(LCD_ENABLE)), yes)
CIE1931_CURVE := yes
endif
# backward compat
ifeq ($(strip $(BACKLIGHT_CUSTOM_DRIVER)), yes)
BACKLIGHT_DRIVER := custom
endif
VALID_BACKLIGHT_TYPES := pwm timer software custom
BACKLIGHT_ENABLE ?= no
ifeq ($(strip $(CONVERT_TO_PROTON_C)), yes)
BACKLIGHT_DRIVER ?= software
else
BACKLIGHT_DRIVER ?= pwm
endif
ifeq ($(strip $(BACKLIGHT_ENABLE)), yes)
ifeq ($(filter $(BACKLIGHT_DRIVER),$(VALID_BACKLIGHT_TYPES)),)
$(error BACKLIGHT_DRIVER="$(BACKLIGHT_DRIVER)" is not a valid backlight type)
endif
COMMON_VPATH += $(QUANTUM_DIR)/backlight
SRC += $(QUANTUM_DIR)/backlight/backlight.c
SRC += $(QUANTUM_DIR)/process_keycode/process_backlight.c
OPT_DEFS += -DBACKLIGHT_ENABLE
ifeq ($(strip $(BACKLIGHT_DRIVER)), custom)
OPT_DEFS += -DBACKLIGHT_CUSTOM_DRIVER
else
SRC += $(QUANTUM_DIR)/backlight/backlight_driver_common.c
ifeq ($(strip $(BACKLIGHT_DRIVER)), pwm)
SRC += $(QUANTUM_DIR)/backlight/backlight_$(PLATFORM_KEY).c
else
SRC += $(QUANTUM_DIR)/backlight/backlight_$(strip $(BACKLIGHT_DRIVER)).c
endif
endif
endif
VALID_WS2812_DRIVER_TYPES := bitbang pwm spi i2c
WS2812_DRIVER ?= bitbang
ifeq ($(strip $(WS2812_DRIVER_REQUIRED)), yes)
ifeq ($(filter $(WS2812_DRIVER),$(VALID_WS2812_DRIVER_TYPES)),)
$(error WS2812_DRIVER="$(WS2812_DRIVER)" is not a valid WS2812 driver)
endif
OPT_DEFS += -DWS2812_DRIVER_$(strip $(shell echo $(WS2812_DRIVER) | tr '[:lower:]' '[:upper:]'))
ifeq ($(strip $(WS2812_DRIVER)), bitbang)
SRC += ws2812.c
else
SRC += ws2812_$(strip $(WS2812_DRIVER)).c
ifeq ($(strip $(PLATFORM)), CHIBIOS)
ifeq ($(strip $(WS2812_DRIVER)), pwm)
OPT_DEFS += -DSTM32_DMA_REQUIRED=TRUE
endif
endif
endif
# add extra deps
ifeq ($(strip $(WS2812_DRIVER)), i2c)
QUANTUM_LIB_SRC += i2c_master.c
endif
endif
ifeq ($(strip $(APA102_DRIVER_REQUIRED)), yes)
COMMON_VPATH += $(DRIVER_PATH)/apa102
SRC += apa102.c
endif
ifeq ($(strip $(VISUALIZER_ENABLE)), yes)
CIE1931_CURVE := yes
endif
ifeq ($(strip $(CIE1931_CURVE)), yes)
OPT_DEFS += -DUSE_CIE1931_CURVE
LED_TABLES := yes
endif
ifeq ($(strip $(LED_TABLES)), yes)
SRC += $(QUANTUM_DIR)/led_tables.c
endif
ifeq ($(strip $(TERMINAL_ENABLE)), yes)
SRC += $(QUANTUM_DIR)/process_keycode/process_terminal.c
OPT_DEFS += -DTERMINAL_ENABLE
OPT_DEFS += -DUSER_PRINT
endif
ifeq ($(strip $(WPM_ENABLE)), yes)
SRC += $(QUANTUM_DIR)/wpm.c
OPT_DEFS += -DWPM_ENABLE
endif
ifeq ($(strip $(ENCODER_ENABLE)), yes)
SRC += $(QUANTUM_DIR)/encoder.c
OPT_DEFS += -DENCODER_ENABLE
endif
ifeq ($(strip $(VELOCIKEY_ENABLE)), yes)
OPT_DEFS += -DVELOCIKEY_ENABLE
SRC += $(QUANTUM_DIR)/velocikey.c
endif
ifeq ($(strip $(VIA_ENABLE)), yes)
DYNAMIC_KEYMAP_ENABLE := yes
RAW_ENABLE := yes
BOOTMAGIC_ENABLE := lite
SRC += $(QUANTUM_DIR)/via.c
OPT_DEFS += -DVIA_ENABLE
endif
ifeq ($(strip $(DYNAMIC_KEYMAP_ENABLE)), yes)
OPT_DEFS += -DDYNAMIC_KEYMAP_ENABLE
SRC += $(QUANTUM_DIR)/dynamic_keymap.c
endif
ifeq ($(strip $(DIP_SWITCH_ENABLE)), yes)
OPT_DEFS += -DDIP_SWITCH_ENABLE
SRC += $(QUANTUM_DIR)/dip_switch.c
endif
VALID_MAGIC_TYPES := yes full lite
BOOTMAGIC_ENABLE ?= no
ifneq ($(strip $(BOOTMAGIC_ENABLE)), no)
ifeq ($(filter $(BOOTMAGIC_ENABLE),$(VALID_MAGIC_TYPES)),)
$(error BOOTMAGIC_ENABLE="$(BOOTMAGIC_ENABLE)" is not a valid type of magic)
endif
ifneq ($(strip $(BOOTMAGIC_ENABLE)), full)
OPT_DEFS += -DBOOTMAGIC_LITE
QUANTUM_SRC += $(QUANTUM_DIR)/bootmagic/bootmagic_lite.c
else
OPT_DEFS += -DBOOTMAGIC_ENABLE
QUANTUM_SRC += $(QUANTUM_DIR)/bootmagic/bootmagic_full.c
endif
endif
COMMON_VPATH += $(QUANTUM_DIR)/bootmagic
QUANTUM_SRC += $(QUANTUM_DIR)/bootmagic/magic.c
VALID_CUSTOM_MATRIX_TYPES:= yes lite no
CUSTOM_MATRIX ?= no
ifneq ($(strip $(CUSTOM_MATRIX)), yes)
ifeq ($(filter $(CUSTOM_MATRIX),$(VALID_CUSTOM_MATRIX_TYPES)),)
$(error CUSTOM_MATRIX="$(CUSTOM_MATRIX)" is not a valid custom matrix type)
endif
# Include common stuff for all non custom matrix users
QUANTUM_SRC += $(QUANTUM_DIR)/matrix_common.c
# if 'lite' then skip the actual matrix implementation
ifneq ($(strip $(CUSTOM_MATRIX)), lite)
# Include the standard or split matrix code if needed
ifeq ($(strip $(SPLIT_KEYBOARD)), yes)
QUANTUM_SRC += $(QUANTUM_DIR)/split_common/matrix.c
else
QUANTUM_SRC += $(QUANTUM_DIR)/matrix.c
endif
endif
endif
# Support for translating old names to new names:
ifeq ($(strip $(DEBOUNCE_TYPE)),sym_g)
DEBOUNCE_TYPE:=sym_defer_g
else ifeq ($(strip $(DEBOUNCE_TYPE)),eager_pk)
DEBOUNCE_TYPE:=sym_eager_pk
else ifeq ($(strip $(DEBOUNCE_TYPE)),sym_pk)
DEBOUNCE_TYPE:=sym_defer_pk
else ifeq ($(strip $(DEBOUNCE_TYPE)),eager_pr)
DEBOUNCE_TYPE:=sym_eager_pr
endif
DEBOUNCE_DIR:= $(QUANTUM_DIR)/debounce
# Debounce Modules. Set DEBOUNCE_TYPE=custom if including one manually.
DEBOUNCE_TYPE?= sym_defer_g
ifneq ($(strip $(DEBOUNCE_TYPE)), custom)
QUANTUM_SRC += $(DEBOUNCE_DIR)/$(strip $(DEBOUNCE_TYPE)).c
endif
ifeq ($(strip $(SPLIT_KEYBOARD)), yes)
POST_CONFIG_H += $(QUANTUM_DIR)/split_common/post_config.h
OPT_DEFS += -DSPLIT_KEYBOARD
# Include files used by all split keyboards
QUANTUM_SRC += $(QUANTUM_DIR)/split_common/split_util.c
# Determine which (if any) transport files are required
ifneq ($(strip $(SPLIT_TRANSPORT)), custom)
QUANTUM_LIB_SRC += $(QUANTUM_DIR)/split_common/transport.c
# Functions added via QUANTUM_LIB_SRC are only included in the final binary if they're called.
# Unused functions are pruned away, which is why we can add multiple drivers here without bloat.
ifeq ($(PLATFORM),AVR)
ifneq ($(NO_I2C),yes)
QUANTUM_LIB_SRC += i2c_master.c \
i2c_slave.c
endif
endif
SERIAL_DRIVER ?= bitbang
OPT_DEFS += -DSERIAL_DRIVER_$(strip $(shell echo $(SERIAL_DRIVER) | tr '[:lower:]' '[:upper:]'))
ifeq ($(strip $(SERIAL_DRIVER)), bitbang)
QUANTUM_LIB_SRC += serial.c
else
QUANTUM_LIB_SRC += serial_$(strip $(SERIAL_DRIVER)).c
endif
endif
COMMON_VPATH += $(QUANTUM_PATH)/split_common
endif
HAPTIC_ENABLE ?= no
ifneq ($(strip $(HAPTIC_ENABLE)),no)
COMMON_VPATH += $(DRIVER_PATH)/haptic
SRC += haptic.c
OPT_DEFS += -DHAPTIC_ENABLE
endif
ifneq ($(filter DRV2605L, $(HAPTIC_ENABLE)), )
SRC += DRV2605L.c
QUANTUM_LIB_SRC += i2c_master.c
OPT_DEFS += -DDRV2605L
endif
ifneq ($(filter SOLENOID, $(HAPTIC_ENABLE)), )
SRC += solenoid.c
OPT_DEFS += -DSOLENOID_ENABLE
endif
ifeq ($(strip $(HD44780_ENABLE)), yes)
SRC += drivers/avr/hd44780.c
OPT_DEFS += -DHD44780_ENABLE
endif
ifeq ($(strip $(OLED_DRIVER_ENABLE)), yes)
OPT_DEFS += -DOLED_DRIVER_ENABLE
COMMON_VPATH += $(DRIVER_PATH)/oled
QUANTUM_LIB_SRC += i2c_master.c
SRC += oled_driver.c
endif
include $(DRIVER_PATH)/qwiic/qwiic.mk
ifeq ($(strip $(UCIS_ENABLE)), yes)
OPT_DEFS += -DUCIS_ENABLE
UNICODE_COMMON := yes
SRC += $(QUANTUM_DIR)/process_keycode/process_ucis.c
endif
ifeq ($(strip $(UNICODEMAP_ENABLE)), yes)
OPT_DEFS += -DUNICODEMAP_ENABLE
UNICODE_COMMON := yes
SRC += $(QUANTUM_DIR)/process_keycode/process_unicodemap.c
endif
ifeq ($(strip $(UNICODE_ENABLE)), yes)
OPT_DEFS += -DUNICODE_ENABLE
UNICODE_COMMON := yes
SRC += $(QUANTUM_DIR)/process_keycode/process_unicode.c
endif
ifeq ($(strip $(UNICODE_COMMON)), yes)
SRC += $(QUANTUM_DIR)/process_keycode/process_unicode_common.c
endif
SPACE_CADET_ENABLE ?= yes
ifeq ($(strip $(SPACE_CADET_ENABLE)), yes)
SRC += $(QUANTUM_DIR)/process_keycode/process_space_cadet.c
OPT_DEFS += -DSPACE_CADET_ENABLE
endif
MAGIC_ENABLE ?= yes
ifeq ($(strip $(MAGIC_ENABLE)), yes)
SRC += $(QUANTUM_DIR)/process_keycode/process_magic.c
OPT_DEFS += -DMAGIC_KEYCODE_ENABLE
endif
GRAVE_ESC_ENABLE ?= yes
ifeq ($(strip $(GRAVE_ESC_ENABLE)), yes)
SRC += $(QUANTUM_DIR)/process_keycode/process_grave_esc.c
OPT_DEFS += -DGRAVE_ESC_ENABLE
endif
ifeq ($(strip $(DYNAMIC_MACRO_ENABLE)), yes)
SRC += $(QUANTUM_DIR)/process_keycode/process_dynamic_macro.c
OPT_DEFS += -DDYNAMIC_MACRO_ENABLE
endif
ifeq ($(strip $(COMBO_ENABLE)), yes)
SRC += $(QUANTUM_DIR)/process_keycode/process_combo.c
OPT_DEFS += -DCOMBO_ENABLE
endif
ifeq ($(strip $(TAP_DANCE_ENABLE)), yes)
SRC += $(QUANTUM_DIR)/process_keycode/process_tap_dance.c
OPT_DEFS += -DTAP_DANCE_ENABLE
endif
ifeq ($(strip $(KEY_LOCK_ENABLE)), yes)
SRC += $(QUANTUM_DIR)/process_keycode/process_key_lock.c
OPT_DEFS += -DKEY_LOCK_ENABLE
endif
ifeq ($(strip $(LEADER_ENABLE)), yes)
SRC += $(QUANTUM_DIR)/process_keycode/process_leader.c
OPT_DEFS += -DLEADER_ENABLE
endif
ifeq ($(strip $(AUTO_SHIFT_ENABLE)), yes)
SRC += $(QUANTUM_DIR)/process_keycode/process_auto_shift.c
OPT_DEFS += -DAUTO_SHIFT_ENABLE
ifeq ($(strip $(AUTO_SHIFT_MODIFIERS)), yes)
OPT_DEFS += -DAUTO_SHIFT_MODIFIERS
endif
endif
JOYSTICK_ENABLE ?= no
ifneq ($(strip $(JOYSTICK_ENABLE)), no)
OPT_DEFS += -DJOYSTICK_ENABLE
SRC += $(QUANTUM_DIR)/process_keycode/process_joystick.c
SRC += $(QUANTUM_DIR)/joystick.c
endif
ifeq ($(strip $(JOYSTICK_ENABLE)), analog)
OPT_DEFS += -DANALOG_JOYSTICK_ENABLE
SRC += analog.c
endif
ifeq ($(strip $(JOYSTICK_ENABLE)), digital)
OPT_DEFS += -DDIGITAL_JOYSTICK_ENABLE
endif
USBPD_ENABLE ?= no
VALID_USBPD_DRIVER_TYPES = custom vendor
USBPD_DRIVER ?= vendor
ifeq ($(strip $(USBPD_ENABLE)), yes)
ifeq ($(filter $(strip $(USBPD_DRIVER)),$(VALID_USBPD_DRIVER_TYPES)),)
$(error USBPD_DRIVER="$(USBPD_DRIVER)" is not a valid USBPD driver)
else
OPT_DEFS += -DUSBPD_ENABLE
ifeq ($(strip $(USBPD_DRIVER)), vendor)
# Vendor-specific implementations
OPT_DEFS += -DUSBPD_VENDOR
ifeq ($(strip $(MCU_SERIES)), STM32G4xx)
OPT_DEFS += -DUSBPD_STM32G4
SRC += usbpd_stm32g4.c
else
$(error There is no vendor-provided USBPD driver available)
endif
else ifeq ($(strip $(USBPD_DRIVER)), custom)
OPT_DEFS += -DUSBPD_CUSTOM
# Board designers can add their own driver to $(SRC)
endif
endif
endif