mirror of https://github.com/qmk/qmk_firmware synced 2024-11-16 17:04:50 +00:00

History

precondition 1899793f27 Make IGNORE_MOD_TAP_INTERRUPT the default behaviour for mod-taps (#20211 )		2023-04-03 15:32:47 +10:00
..
keymaps	Make IGNORE_MOD_TAP_INTERRUPT the default behaviour for mod-taps (#20211 )	2023-04-03 15:32:47 +10:00
left_pm	Move ortho & numpad layouts to data driven (#20183 )	2023-03-29 15:54:34 +11:00
right_pm	Move ortho & numpad layouts to data driven (#20183 )	2023-03-29 15:54:34 +11:00
config.h
info.json	Move ortho & numpad layouts to data driven (#20183 )	2023-03-29 15:54:34 +11:00
readme.md
rules.mk

ogurec

ogurec is a reversible 12u x 3u ortholinear keyboard that offers left-sided and right-sided PM placement.

The default ogurec keymap is for left-sided PM placement.

When flashing ogurec with the PM soldered onto the right side, follow the second example below and use: make ogure/right_pm:default

Keyboard Maintainer: H. Bond
Hardware Supported: ogurec (https://github.com/drhigsby/ogurec)
Hardware Availability: open source 3DP case available here https://github.com/drhigsby (case creator: https://github.com/dpalka15)

Make example for this keyboard (after setting up your build environment):

make drhigsby/ogurec:default
make drhigsby/ogurec/right_pm:default

To place the keyboard into bootloader mode, solder a reset switch onto the PCB and press it OR short the GND and RST pins on the pro micro.

Flashing example for this keyboard:

make drhigsby/ogurec:default:flash
make drhigsby/ogurec/right_pm:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.