mirrors/qmk_firmware
1
0
Fork 1
mirror of https://github.com/qmk/qmk_firmware synced 2024-11-18 01:46:09 +00:00
Code Issues Projects Releases Packages Wiki Activity
qmk_firmware/drivers/sensors/pmw3389.c

292 lines
8.8 KiB
C
Raw Blame History

/* Copyright 2020 Christopher Courtney, aka Drashna Jael're (@drashna) <drashna@live.com>
* Copyright 2019 Sunjun Kim
* Copyright 2020 Ploopy Corporation
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "spi_master.h"
#include "pmw3389.h"
#include "wait.h"
#include "debug.h"
#include "print.h"
#include "pmw3389_firmware.h"
// Registers
// clang-format off
#define REG_Product_ID 0x00
#define REG_Revision_ID 0x01
#define REG_Motion 0x02
#define REG_Delta_X_L 0x03
#define REG_Delta_X_H 0x04
#define REG_Delta_Y_L 0x05
#define REG_Delta_Y_H 0x06
#define REG_SQUAL 0x07
#define REG_RawData_Sum 0x08
#define REG_Maximum_RawData 0x09
#define REG_Minimum_RawData 0x0a
#define REG_Shutter_Lower 0x0b
#define REG_Shutter_Upper 0x0c
#define REG_Ripple_Control 0x0d
#define REG_Resolution_L 0x0e
#define REG_Resolution_H 0x0f
#define REG_Config2 0x10
#define REG_Angle_Tune 0x11
#define REG_Frame_Capture 0x12
#define REG_SROM_Enable 0x13
#define REG_Run_Downshift 0x14
#define REG_Rest1_Rate_Lower 0x15
#define REG_Rest1_Rate_Upper 0x16
#define REG_Rest1_Downshift 0x17
#define REG_Rest2_Rate_Lower 0x18
#define REG_Rest2_Rate_Upper 0x19
#define REG_Rest2_Downshift 0x1a
#define REG_Rest3_Rate_Lower 0x1b
#define REG_Rest3_Rate_Upper 0x1c
#define REG_Observation 0x24
#define REG_Data_Out_Lower 0x25
#define REG_Data_Out_Upper 0x26
#define REG_SROM_ID 0x2a
#define REG_Min_SQ_Run 0x2b
#define REG_RawData_Threshold 0x2c
#define REG_Control2 0x2d
#define REG_Config5_L 0x2e
#define REG_Config5_H 0x2f
#define REG_Power_Up_Reset 0X3a
#define REG_Shutdown 0x3b
#define REG_Inverse_Product_ID 0x3f
#define REG_LiftCutoff_Cal3 0x41
#define REG_Angle_Snap 0x42
#define REG_LiftCutoff_Cal1 0x4a
#define REG_Motion_Burst 0x50
#define REG_SROM_Load_Burst 0x62
#define REG_Lift_Config 0x63
#define REG_RawData_Burst 0x64
#define REG_LiftCutoff_Cal2 0x65
#define REG_LiftCutoff_Cal_Timeout 0x71
#define REG_LiftCutoff_Cal_Min_Length 0x72
#define REG_PWM_Period_Cnt 0x73
#define REG_PWM_Width_Cnt 0x74
#define CPI_STEP 50
// clang-format on
// limits to 0--319, resulting in a CPI range of 50 -- 16000 (as only steps of 50 are possible).
#ifndef MAX_CPI
# define MAX_CPI 0x013f
#endif
bool _inBurst = false;
#ifdef CONSOLE_ENABLE
void print_byte(uint8_t byte) { dprintf("%c%c%c%c%c%c%c%c|", (byte & 0x80 ? '1' : '0'), (byte & 0x40 ? '1' : '0'), (byte & 0x20 ? '1' : '0'), (byte & 0x10 ? '1' : '0'), (byte & 0x08 ? '1' : '0'), (byte & 0x04 ? '1' : '0'), (byte & 0x02 ? '1' : '0'), (byte & 0x01 ? '1' : '0')); }
#endif
#define constrain(amt, low, high) ((amt) < (low) ? (low) : ((amt) > (high) ? (high) : (amt)))
bool pmw3389_spi_start(void) {
bool status = spi_start(PMW3389_CS_PIN, PMW3389_SPI_LSBFIRST, PMW3389_SPI_MODE, PMW3389_SPI_DIVISOR);
// tNCS-SCLK, 120ns
wait_us(1);
return status;
}
spi_status_t pmw3389_write(uint8_t reg_addr, uint8_t data) {
pmw3389_spi_start();
if (reg_addr != REG_Motion_Burst) {
_inBurst = false;
}
// send address of the register, with MSBit = 1 to indicate it's a write
spi_status_t status = spi_write(reg_addr | 0x80);
status = spi_write(data);
// tSCLK-NCS for write operation is 35 us
wait_us(35);
spi_stop();
// tSWW/tSWR (=180us) minus tSCLK-NCS. Could be shortened, but is looks like a safe lower bound
wait_us(145);
return status;
}
uint8_t pmw3389_read(uint8_t reg_addr) {
pmw3389_spi_start();
// send adress of the register, with MSBit = 0 to indicate it's a read
spi_write(reg_addr & 0x7f);
// tSRAD (=160us)
wait_us(160);
uint8_t data = spi_read();
// tSCLK-NCS, 120ns
wait_us(1);
spi_stop();
// tSRW/tSRR (=20us) minus tSCLK-NCS
wait_us(19);
return data;
}
bool pmw3389_init(void) {
setPinOutput(PMW3389_CS_PIN);
spi_init();
_inBurst = false;
spi_stop();
pmw3389_spi_start();
spi_stop();
pmw3389_write(REG_Shutdown, 0xb6); // Shutdown first
wait_ms(300);
pmw3389_spi_start();
wait_us(40);
spi_stop();
wait_us(40);
// power up, need to first drive NCS high then low, see above.
pmw3389_write(REG_Power_Up_Reset, 0x5a);
wait_ms(50);
// read registers and discard
pmw3389_read(REG_Motion);
pmw3389_read(REG_Delta_X_L);
pmw3389_read(REG_Delta_X_H);
pmw3389_read(REG_Delta_Y_L);
pmw3389_read(REG_Delta_Y_H);
pmw3389_upload_firmware();
spi_stop();
wait_ms(10);
pmw3389_set_cpi(PMW3389_CPI);
wait_ms(1);
pmw3389_write(REG_Config2, 0x00);
pmw3389_write(REG_Angle_Tune, constrain(ROTATIONAL_TRANSFORM_ANGLE, -127, 127));
pmw3389_write(REG_Lift_Config, PMW3389_LIFTOFF_DISTANCE);
bool init_success = pmw3389_check_signature();
#ifdef CONSOLE_ENABLE
if (init_success) {
dprintf("pmw3389 signature verified");
} else {
dprintf("pmw3389 signature verification failed!");
}
#endif
writePinLow(PMW3389_CS_PIN);
return init_success;
}
void pmw3389_upload_firmware(void) {
// Datasheet claims we need to disable REST mode first, but during startup
// it's already disabled and we're not turning it on ...
// pmw3389_write(REG_Config2, 0x00); // disable REST mode
pmw3389_write(REG_SROM_Enable, 0x1d);
wait_ms(10);
pmw3389_write(REG_SROM_Enable, 0x18);
pmw3389_spi_start();
spi_write(REG_SROM_Load_Burst | 0x80);
wait_us(15);
for (uint16_t i = 0; i < FIRMWARE_LENGTH; i++) {
spi_write(pgm_read_byte(firmware_data + i));
#ifndef PMW3389_FIRMWARE_UPLOAD_FAST
wait_us(15);
#endif
}
wait_us(200);
pmw3389_read(REG_SROM_ID);
pmw3389_write(REG_Config2, 0x00);
}
bool pmw3389_check_signature(void) {
uint8_t pid = pmw3389_read(REG_Product_ID);
uint8_t iv_pid = pmw3389_read(REG_Inverse_Product_ID);
uint8_t SROM_ver = pmw3389_read(REG_SROM_ID);
return (pid == firmware_signature[0] && iv_pid == firmware_signature[1] && SROM_ver == firmware_signature[2]); // signature for SROM 0x04
}
uint16_t pmw3389_get_cpi(void) {
uint16_t cpival = (pmw3389_read(REG_Resolution_H) << 8) | pmw3389_read(REG_Resolution_L);
return (uint16_t)((cpival + 1) & 0xffff) * CPI_STEP;
}
void pmw3389_set_cpi(uint16_t cpi) {
uint16_t cpival = constrain((cpi / CPI_STEP) - 1, 0, MAX_CPI);
// Sets upper byte first for more consistent setting of cpi
pmw3389_write(REG_Resolution_H, (cpival >> 8) & 0xff);
pmw3389_write(REG_Resolution_L, cpival & 0xff);
}
report_pmw3389_t pmw3389_read_burst(void) {
report_pmw3389_t report = {0};
if (!_inBurst) {
#ifdef CONSOLE_ENABLE
dprintf("burst on");
#endif
pmw3389_write(REG_Motion_Burst, 0x00);
_inBurst = true;
}
pmw3389_spi_start();
spi_write(REG_Motion_Burst);
wait_us(35); // waits for tSRAD_MOTBR
report.motion = spi_read();
spi_read(); // skip Observation
// delta registers
report.dx = spi_read();
report.mdx = spi_read();
report.dy = spi_read();
report.mdy = spi_read();
if (report.motion & 0b111) { // panic recovery, sometimes burst mode works weird.
_inBurst = false;
}
spi_stop();
#ifdef CONSOLE_ENABLE
if (debug_mouse) {
print_byte(report.motion);
print_byte(report.dx);
print_byte(report.mdx);
print_byte(report.dy);
print_byte(report.mdy);
dprintf("\n");
}
#endif
report.isMotion = (report.motion & 0x80) != 0;
report.isOnSurface = (report.motion & 0x08) == 0;
report.dx |= (report.mdx << 8);
report.dx = report.dx * -1;
report.dy |= (report.mdy << 8);
report.dy = report.dy * -1;
return report;
}
Reference in a new issue View git blame Copy permalink