mirrors/qmk_firmware
1
0
Fork 1
mirror of https://github.com/qmk/qmk_firmware synced 2024-11-15 16:35:15 +00:00
Code Issues Projects Releases Packages Wiki Activity
qmk_firmware/keyboards/macro3
History
Ryan 7e0299117b
Move encoder config to data driven (#19923) 
Co-authored-by: Nick Brassel <nick@tzarc.org>
2023-02-26 09:45:12 +11:00
..
keymaps/default Macro3: rename LAYOUT to LAYOUT_ortho_2x4 (#18820) 2022-10-23 00:07:31 +01:00
info.json Move encoder config to data driven (#19923) 2023-02-26 09:45:12 +11:00
macro3.c Move layouts for direct_pins boards to data driven (#19872) 2023-02-19 18:55:12 +11:00
post_config.h Add some missing #pragma onces (#19902) 2023-02-21 15:55:23 +00:00
readme.md
rules.mk Migrate MCU and BOOTLOADER to data-driven (#19529) 2023-02-08 18:41:46 +11:00

readme.md

Macro3

Macro3

Macro3 is a low-profile macro pad with dual encoder support designed by @davidphilipbarr.

Keyboard Info

Make example for this keyboard (after setting up your build environment):

make macro3:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the top right key and plug in the controller.
  • Keycode in layout: Press the key mapped to QK_BOOT if it is configured.
  • Physical reset pins: Briefly short the RST and GND pins on the microcontroller using tweezers, a paperclip, or any other conductive material.