mirror of
https://github.com/qmk/qmk_firmware
synced 2024-11-18 01:46:09 +00:00
643f6367a1
* Add missing '(' to print_bin_reverse32 declaration
* Fix insufficient character buffers on satisfaction75
* Remove \0 character in format string and use corrected offset math
instead on rocketboard 16
* Replace snprintf_ with snprintf for djinn
* Explicitly ignore format checks for tracktyl manuform that uses %b
specifier
* Print properly escaped version string in command.c, as PRODUCT or
other defines can contain constructs like 'Vendor keyboard 66%' which
will be interpreted as a format specifier
|
||
|---|---|---|
| .. | ||
| graphics | ||
| keymaps/default | ||
| rev1 | ||
| rev2 | ||
| config.h | ||
| djinn.c | ||
| djinn.h | ||
| djinn_portscan_matrix.c | ||
| djinn_split_sync.c | ||
| djinn_usbpd.c | ||
| halconf.h | ||
| info.json | ||
| mcuconf.h | ||
| readme.md | ||
| rules.mk | ||
Djinn
The Djinn is a 64-key split keyboard -- dual 4x7 with a 4-key thumb cluster and encoders. It also has a 5-way tactile switch under the thumb. Oh, and two displays.
Keyboard Maintainer: tzarc
Hardware Supported: Djinn: rev1, rev2
Hardware Availability: Open-source
Make example for this keyboard (after setting up your build environment):
make tzarc/djinn/rev2:default
Flashing example for this keyboard:
make tzarc/djinn/rev2:default:flash
See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.
Bootloader
Enter the bootloader in 3 ways:
- Bootmagic reset: Hold down the top-left key and plug in the keyboard.
- Physical reset button: Briefly press the button on the back of the PCB.
- Keycode in layout: Press the key mapped to
QK_BOOTif it is available.