mirror of
https://github.com/qmk/qmk_firmware
synced 2024-11-16 08:56:11 +00:00
50a12c06b9
* bastardkb: restructure folder hierarchy ahead of supporting other adapters/mcus Upcoming support for the following (adapter, mcu) pairs will be submitted in follow-up PRs: - `v2/elitec` - `v2/stemcell` - `blackpill` This PR contains the following changes: - Move previous implementation to an inner `v1/elitec` folder - Move keyboard USB IDs and strings to data driven - Update headers to update maintainers list - Run `qmk format-c` * bastardkb/charybdis: remove broken acceleration implementation * bastardkb/charybdis: fix debug output * bastardkb: add support for BastardKb the `v2/elitec` (adapter, mcu) pair * bastardkb: add Blackpill support * bastardkb/charybdis/3x5: add `bstiq` keymap * bastardkb/charybdis: add fake LEDs to the configuration For the Charybdis 3x5 (respectively 4x6), the LED config now simulates 36 (respectively 58) LEDs instead of the actual 35 (respectively 56) to prevent confusion when testing LEDs during assembly when handedness is not set correctly. Those fake LEDs are bound to the physical bottom-left corner. * bastardkbk/charybdis/readme.md: update build commands Merge pull request #5 from Nathancooke7/update_charybdis_readme_v2_shield. * bastardkb/charybdis: fix Via keymap with blackpill * bastardkb/charybdis: add 3x6 configuration * bastardkb/charybdis: remove unnecessary files * bastardkb/charybdis: remove obsolete code * bastardkb/charybdis/3x6: add Via keymap * bastardkb: add support for Splinky (RP2040) board * bastardkb: initial configuration for the Splinky (SPI not working yet) * bastardkb/charybdis/3x5/v2/splinky: tentative change to enable trackball * bastardkb/charybdis/3x5/v2/splinky: fix SCK, MISO, MOSI pins * bastardkb/charybdis/3x5/v2/splinky: fix SCK, MISO, MOSI pins * bastardkb/charybdis/4x6/v2/splinky: add SPI configuration and enable trackball * bastardkb/charybdis/3x6: add splinky config * bastardkb/*/v2/splinky: update drivers to `vendor` * bastardkb/dilemma: add new board * bastardkb/charybdis: fix infinite loop in `layer_state_set_user(…)` in the `via` keymaps * bastardkb/dilemma: add `bstiq` keymap * bastardkb: specify blackpill boards * bastardkb/charybdis: fix blackpill-specific define syntax * bastardkb: remove `NO_ACTION_MACRO` and `NO_ACTION_FUNCTION` which are no longer valid options * bastardkb: fix `QK_BOOT` keycodes * bastardkb/dilemma: fix mouse direction on X axis * bastardkb/charybdis/3x6: adjust CS * bastardkb/dilemma: adjust trackpad configuration * charybdis: fix `PWM33XX_CS_PIN` defines This is a follow-up of https://github.com/qmk/qmk_firmware/pull/17613. * bastardkb: remove Vial mentions from `bstiq` keymaps * Cleanup unnecessary comments Co-authored-by: Nathan <nathan.cooke@compass.com> Co-authored-by: Charly Delay <0xcharly@codesink.dev>
34 lines
1.1 KiB
Makefile
34 lines
1.1 KiB
Makefile
# MCU name
|
|
MCU = RP2040
|
|
|
|
# Bootloader selection
|
|
BOOTLOADER = rp2040
|
|
|
|
# RP2040-specific options
|
|
ALLOW_WARNINGS = yes
|
|
PICO_INTRINSICS_ENABLED = no # ATM Unsupported by ChibiOS.
|
|
|
|
# Build Options
|
|
# change yes to no to disable
|
|
#
|
|
BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite
|
|
MOUSEKEY_ENABLE = no # Mouse keys
|
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
|
CONSOLE_ENABLE = no # Console for debug
|
|
COMMAND_ENABLE = no # Commands for debug and configuration
|
|
NKRO_ENABLE = no # Enable N-Key Rollover
|
|
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
|
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
|
|
AUDIO_ENABLE = no # Audio output
|
|
|
|
AUDIO_SUPPORTED = no # Audio is not supported
|
|
RGB_MATRIX_SUPPORTED = yes # RGB matrix is supported and enabled by default
|
|
RGBLIGHT_SUPPORTED = yes # RGB underglow is supported, but not enabled by default
|
|
RGB_MATRIX_ENABLE = yes # Enable keyboard RGB matrix functionality
|
|
RGB_MATRIX_DRIVER = WS2812
|
|
|
|
SPLIT_KEYBOARD = yes
|
|
LAYOUTS = split_3x6_3
|
|
|
|
SERIAL_DRIVER = vendor
|
|
WS2812_DRIVER = vendor
|