diff --git a/keyboards/novelpad/config.h b/keyboards/novelpad/config.h
index c9b6b91a595..a2d24d7f820 100755
--- a/keyboards/novelpad/config.h
+++ b/keyboards/novelpad/config.h
@@ -14,8 +14,8 @@ GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see .
*/
-#ifndef CONFIG_H
-#define CONFIG_H
+
+#pragma once
#include "config_common.h"
@@ -31,35 +31,219 @@ along with this program. If not, see .
#define MATRIX_ROWS 5
#define MATRIX_COLS 4
-/* key matrix pins */
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
#define MATRIX_ROW_PINS { C2, C4, C5, C6, C7 }
#define MATRIX_COL_PINS { D7, D6, D5, D4 }
#define UNUSED_PINS
-/* COL2ROW or ROW2COL */
+/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
-/* Set 0 if debouncing isn't needed */
+#define BACKLIGHT_PIN B7
+//#define BACKLIGHT_BREATHING
+#define BACKLIGHT_LEVELS 10
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
+
+#define RGB_DI_PIN D3
+#ifdef RGB_DI_PIN
+ #define RGBLED_NUM 4
+// #define RGBLIGHT_HUE_STEP 8
+// #define RGBLIGHT_SAT_STEP 8
+// #define RGBLIGHT_VAL_STEP 8
+// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+// /*== all animations enable ==*/
+ #define RGBLIGHT_ANIMATIONS
+// /*== or choose animations ==*/
+// #define RGBLIGHT_EFFECT_BREATHING
+// #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+// #define RGBLIGHT_EFFECT_SNAKE
+// #define RGBLIGHT_EFFECT_KNIGHT
+// #define RGBLIGHT_EFFECT_CHRISTMAS
+// #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+// #define RGBLIGHT_EFFECT_RGB_TEST
+// #define RGBLIGHT_EFFECT_ALTERNATING
+// /*== customize breathing effect ==*/
+// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
+// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
+// /*==== use exp() and sin() ====*/
+// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
+// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
+#endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCE 5
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
-
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
-/* key combination for command */
-#define IS_COMMAND() ( \
- false \
-)
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
-#define BACKLIGHT_LEVELS 10
-#define BACKLIGHT_PIN B7
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
-#ifdef RGBLIGHT_ENABLE
-#define RGB_DI_PIN D3
-#define RGBLIGHT_ANIMATIONS
-#define RGBLED_NUM 4
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+/* defined by default; to change, uncomment and set to the combination you want */
+// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP H
+//#define MAGIC_KEY_HELP_ALT SLASH
+//#define MAGIC_KEY_DEBUG D
+//#define MAGIC_KEY_DEBUG_MATRIX X
+//#define MAGIC_KEY_DEBUG_KBD K
+//#define MAGIC_KEY_DEBUG_MOUSE M
+//#define MAGIC_KEY_VERSION V
+//#define MAGIC_KEY_STATUS S
+//#define MAGIC_KEY_CONSOLE C
+//#define MAGIC_KEY_LAYER0 0
+//#define MAGIC_KEY_LAYER0_ALT GRAVE
+//#define MAGIC_KEY_LAYER1 1
+//#define MAGIC_KEY_LAYER2 2
+//#define MAGIC_KEY_LAYER3 3
+//#define MAGIC_KEY_LAYER4 4
+//#define MAGIC_KEY_LAYER5 5
+//#define MAGIC_KEY_LAYER6 6
+//#define MAGIC_KEY_LAYER7 7
+//#define MAGIC_KEY_LAYER8 8
+//#define MAGIC_KEY_LAYER9 9
+//#define MAGIC_KEY_BOOTLOADER B
+//#define MAGIC_KEY_BOOTLOADER_ALT ESC
+//#define MAGIC_KEY_LOCK CAPS
+//#define MAGIC_KEY_EEPROM E
+//#define MAGIC_KEY_EEPROM_CLEAR BSPACE
+//#define MAGIC_KEY_NKRO N
+//#define MAGIC_KEY_SLEEP_LED Z
+
+/*
+ * Feature disable options
+ * These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+ - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+ - MIDI notes can be added to the keymap
+ - Octave shift and transpose
+ - Virtual sustain, portamento, and modulation wheel
+ - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES 2 //< number of visible lines of the display
+#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
+
+#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT PORTB //< port for the LCD lines
+#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
+#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
+#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
+#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
+#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
+#define LCD_RS_PORT LCD_PORT //< port for RS line
+#define LCD_RS_PIN 3 //< pin for RS line
+#define LCD_RW_PORT LCD_PORT //< port for RW line
+#define LCD_RW_PIN 2 //< pin for RW line
+#define LCD_E_PORT LCD_PORT //< port for Enable line
+#define LCD_E_PIN 1 //< pin for Enable line
#endif
+*/
-#endif
+/* Bootmagic Lite key configuration */
+// #define BOOTMAGIC_LITE_ROW 0
+// #define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/novelpad/info.json b/keyboards/novelpad/info.json
index 7523bf5dda3..4bd648754b3 100644
--- a/keyboards/novelpad/info.json
+++ b/keyboards/novelpad/info.json
@@ -6,7 +6,32 @@
"height": 5,
"layouts": {
"LAYOUT_ortho_5x4": {
- "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":0, "y":4}, {"x":1, "y":4}, {"x":2, "y":4}, {"x":3, "y":4}]
+ "layout": [
+ {"x":0, "y":0},
+ {"x":1, "y":0},
+ {"x":2, "y":0},
+ {"x":3, "y":0},
+
+ {"x":0, "y":1},
+ {"x":1, "y":1},
+ {"x":2, "y":1},
+ {"x":3, "y":1},
+
+ {"x":0, "y":2},
+ {"x":1, "y":2},
+ {"x":2, "y":2},
+ {"x":3, "y":2},
+
+ {"x":0, "y":3},
+ {"x":1, "y":3},
+ {"x":2, "y":3},
+ {"x":3, "y":3},
+
+ {"x":0, "y":4},
+ {"x":1, "y":4},
+ {"x":2, "y":4},
+ {"x":3, "y":4}
+ ]
}
}
}
diff --git a/keyboards/novelpad/keymaps/default/keymap.c b/keyboards/novelpad/keymaps/default/keymap.c
index 76e0937e6d2..cbac67eaaac 100755
--- a/keyboards/novelpad/keymaps/default/keymap.c
+++ b/keyboards/novelpad/keymaps/default/keymap.c
@@ -14,111 +14,60 @@ GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see .
*/
+
#include QMK_KEYBOARD_H
enum custom_keycodes {
- BL = SAFE_RANGE,
- WK_RED,
- WK_GREEN,
- WK_BLUE
+ WK_RED = SAFE_RANGE,
+ WK_GREEN,
+ WK_BLUE
};
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ [0] = LAYOUT(
+ KC_NLCK, KC_PSLS, KC_PAST, KC_ESC,
+ KC_P7, KC_P8, KC_P9, KC_PMNS,
+ KC_P4, KC_P5, KC_P6, KC_PPLS,
+ KC_P1, KC_P2, KC_P3, KC_TAB,
+ MO(1), KC_P0, KC_PDOT, KC_ENT
+ ),
- [0] = LAYOUT(
- KC_NLCK, KC_PSLS, KC_PAST, KC_ESC,
- KC_P7, KC_P8, KC_P9, KC_PMNS,
- KC_P4, KC_P5, KC_P6, KC_PPLS,
- KC_P1, KC_P2, KC_P3, KC_TAB,
- MO(1), KC_P0, KC_PDOT, KC_ENT
- ),
-
- [1] = LAYOUT(
- _______, BL, RGB_MODE_SWIRL, RESET,
- RGB_TOG, RGB_MOD, RGB_MODE_PLAIN, RGB_MODE_SNAKE,
- RGB_HUI, RGB_SAI, RGB_VAI, RGB_MODE_KNIGHT,
- RGB_HUD, RGB_SAD, RGB_VAD, RGB_MODE_XMAS,
- _______, WK_RED, WK_GREEN, WK_BLUE
- ),
-
+ [1] = LAYOUT(
+ _______, BL_STEP, RGB_M_SW, RESET,
+ RGB_TOG, RGB_MOD, RGB_M_P, RGB_M_SN,
+ RGB_HUI, RGB_SAI, RGB_VAI, RGB_M_K,
+ RGB_HUD, RGB_SAD, RGB_VAD, RGB_M_X,
+ _______, WK_RED, WK_GREEN, WK_BLUE
+ )
};
-void matrix_init_user(void) {
-
- rgblight_setrgb(0,255,0);
-}
-
-void matrix_scan_user(void) {
+void keyboard_post_init_user(void) {
+ rgblight_setrgb(0, 255, 0);
}
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
- switch (keycode) {
- case BL:
- if (record->event.pressed) {
-#ifdef BACKLIGHT_ENABLE
- backlight_step();
-#endif
+ switch (keycode) {
+ case WK_RED:
+ if (record->event.pressed) {
+ rgblight_show_solid_color(0xFF, 0x00, 0x00);
+ } else {
+ rgblight_show_solid_color(0xFF, 0xFF, 0xFF);
+ }
+ return false;
+ case WK_GREEN:
+ if (record->event.pressed) {
+ rgblight_show_solid_color(0x00, 0xFF, 0x00);
+ } else {
+ rgblight_show_solid_color(0xFF, 0xFF, 0xFF);
+ }
+ return false;
+ case WK_BLUE:
+ if (record->event.pressed) {
+ rgblight_show_solid_color(0x00, 0x00, 0xFF);
+ } else {
+ rgblight_show_solid_color(0xFF, 0xFF, 0xFF);
+ }
+ return false;
}
- return false;
- break;
- case WK_RED:
- if (record->event.pressed) {
- rgblight_show_solid_color(0xFF, 0, 0);
- } else {
- rgblight_show_solid_color(0xFF, 0xFF, 0xFF);
- }
- return false;
- break;
- case WK_GREEN:
- if (record->event.pressed) {
- rgblight_show_solid_color(0, 0xFF, 0);
- } else {
- rgblight_show_solid_color(0xFF, 0xFF, 0xFF);
- }
- return false;
- break;
- case WK_BLUE:
- if (record->event.pressed) {
- rgblight_show_solid_color(0, 0, 0xFF);
- } else {
- rgblight_show_solid_color(0xFF, 0xFF, 0xFF);
- }
- return false;
- break;
- }
- return true;
-}
-
-void led_set_user(uint8_t usb_led) {
-
- if (usb_led & (1 << USB_LED_NUM_LOCK)) {
-
- } else {
-
- }
-
- if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
-
- } else {
-
- }
-
- if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
-
- } else {
-
- }
-
- if (usb_led & (1 << USB_LED_COMPOSE)) {
-
- } else {
-
- }
-
- if (usb_led & (1 << USB_LED_KANA)) {
-
- } else {
-
- }
-
+ return true;
}
diff --git a/keyboards/novelpad/novelpad.c b/keyboards/novelpad/novelpad.c
index 719cb89d6a5..9f6ee7dae47 100755
--- a/keyboards/novelpad/novelpad.c
+++ b/keyboards/novelpad/novelpad.c
@@ -14,4 +14,5 @@ GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see .
*/
+
#include "novelpad.h"
diff --git a/keyboards/novelpad/novelpad.h b/keyboards/novelpad/novelpad.h
index f5a0b95f59c..6650a672232 100755
--- a/keyboards/novelpad/novelpad.h
+++ b/keyboards/novelpad/novelpad.h
@@ -14,25 +14,23 @@ GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see .
*/
-#ifndef KB_H
-#define KB_H
+
+#pragma once
#include "quantum.h"
#define LAYOUT_ortho_5x4( \
- K00, K01, K02, K03, \
- K10, K11, K12, K13, \
- K20, K21, K22, K23, \
- K30, K31, K32, K33, \
- K40, K41, K42, K43 \
+ K00, K01, K02, K03, \
+ K10, K11, K12, K13, \
+ K20, K21, K22, K23, \
+ K30, K31, K32, K33, \
+ K40, K41, K42, K43 \
) { \
- { K00, K01, K02, K03 }, \
- { K10, K11, K12, K13 }, \
- { K20, K21, K22, K23 }, \
- { K30, K31, K32, K33 }, \
- { K40, K41, K42, K43 } \
+ { K00, K01, K02, K03 }, \
+ { K10, K11, K12, K13 }, \
+ { K20, K21, K22, K23 }, \
+ { K30, K31, K32, K33 }, \
+ { K40, K41, K42, K43 } \
}
#define LAYOUT LAYOUT_ortho_5x4
-
-#endif
diff --git a/keyboards/novelpad/README.md b/keyboards/novelpad/readme.md
similarity index 68%
rename from keyboards/novelpad/README.md
rename to keyboards/novelpad/readme.md
index 5c73644a289..0cde8337ca0 100644
--- a/keyboards/novelpad/README.md
+++ b/keyboards/novelpad/readme.md
@@ -12,4 +12,4 @@ Make example for this keyboard (after setting up your build environment):
make novelpad:default
-See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/novelpad/rules.mk b/keyboards/novelpad/rules.mk
index 8d35c6c05cc..e77a0d6515a 100755
--- a/keyboards/novelpad/rules.mk
+++ b/keyboards/novelpad/rules.mk
@@ -1,44 +1,15 @@
# MCU name
MCU = atmega32u2
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 16000000
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# atmega32a bootloadHID
+BOOTLOADER = atmel-dfu
# Build Options