mirrors/qmk_firmware
1
0
Fork 1
mirror of https://github.com/qmk/qmk_firmware synced 2024-11-09 13:29:26 +00:00
Code Issues Projects Releases Packages Wiki Activity

Merge pull request #691 from fredizzimo/fix_line_endings

Browse source 
Fix line endings
This commit is contained in:
Jack Humbert 2016-08-27 14:54:55 -04:00 committed by GitHub
commit f815b4871e
40 changed files with 6252 additions and 6251 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

1
.gitattributes vendored
View file

@ -91,3 +91,4 @@ GRAPHICS
# hex files
*.hex binary
*.eep binary

98
keyboards/chibios_test/boards/GENERIC_STM32_F103/board.c
View file

@ -1,49 +1,49 @@
/*
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
#include "hal.h"
/**
* @brief PAL setup.
* @details Digital I/O ports static configuration as defined in @p board.h.
* This variable is used by the HAL when initializing the PAL driver.
*/
#if HAL_USE_PAL || defined(__DOXYGEN__)
const PALConfig pal_default_config =
{
{VAL_GPIOAODR, VAL_GPIOACRL, VAL_GPIOACRH},
{VAL_GPIOBODR, VAL_GPIOBCRL, VAL_GPIOBCRH},
{VAL_GPIOCODR, VAL_GPIOCCRL, VAL_GPIOCCRH},
{VAL_GPIODODR, VAL_GPIODCRL, VAL_GPIODCRH},
{VAL_GPIOEODR, VAL_GPIOECRL, VAL_GPIOECRH},
};
#endif
/*
* Early initialization code.
* This initialization must be performed just after stack setup and before
* any other initialization.
*/
void __early_init(void) {
stm32_clock_init();
}
/*
* Board-specific initialization code.
*/
void boardInit(void) {
}
/*
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
#include "hal.h"
/**
* @brief PAL setup.
* @details Digital I/O ports static configuration as defined in @p board.h.
* This variable is used by the HAL when initializing the PAL driver.
*/
#if HAL_USE_PAL || defined(__DOXYGEN__)
const PALConfig pal_default_config =
{
{VAL_GPIOAODR, VAL_GPIOACRL, VAL_GPIOACRH},
{VAL_GPIOBODR, VAL_GPIOBCRL, VAL_GPIOBCRH},
{VAL_GPIOCODR, VAL_GPIOCCRL, VAL_GPIOCCRH},
{VAL_GPIODODR, VAL_GPIODCRL, VAL_GPIODCRH},
{VAL_GPIOEODR, VAL_GPIOECRL, VAL_GPIOECRH},
};
#endif
/*
* Early initialization code.
* This initialization must be performed just after stack setup and before
* any other initialization.
*/
void __early_init(void) {
stm32_clock_init();
}
/*
* Board-specific initialization code.
*/
void boardInit(void) {
}

332
keyboards/chibios_test/boards/GENERIC_STM32_F103/board.h
View file

@ -1,166 +1,166 @@
/*
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
#ifndef _BOARD_H_
#define _BOARD_H_
/*
* Setup for a Generic STM32F103 board.
*/
/*
* Board identifier.
*/
#define BOARD_GENERIC_STM32_F103
#define BOARD_NAME "Generic STM32F103x board"
/*
* Board frequencies.
*/
#define STM32_LSECLK 32768
#define STM32_HSECLK 8000000
/*
* MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h.
*/
#define STM32F103xB
/*
* IO pins assignments
*/
/* on-board */
#define GPIOC_LED 13
#define GPIOD_OSC_IN 0
#define GPIOD_OSC_OUT 1
/* In case your board has a "USB enable" hardware
controlled by a pin, define it here. (It could be just
a 1.5k resistor connected to D+ line.)
*/
/*
#define GPIOB_USB_DISC 10
*/
/*
* I/O ports initial setup, this configuration is established soon after reset
* in the initialization code.
*
* The digits have the following meaning:
* 0 - Analog input.
* 1 - Push Pull output 10MHz.
* 2 - Push Pull output 2MHz.
* 3 - Push Pull output 50MHz.
* 4 - Digital input.
* 5 - Open Drain output 10MHz.
* 6 - Open Drain output 2MHz.
* 7 - Open Drain output 50MHz.
* 8 - Digital input with PullUp or PullDown resistor depending on ODR.
* 9 - Alternate Push Pull output 10MHz.
* A - Alternate Push Pull output 2MHz.
* B - Alternate Push Pull output 50MHz.
* C - Reserved.
* D - Alternate Open Drain output 10MHz.
* E - Alternate Open Drain output 2MHz.
* F - Alternate Open Drain output 50MHz.
* Please refer to the STM32 Reference Manual for details.
*/
/*
* Port A setup.
* Everything input with pull-up except:
* PA2 - Alternate output (USART2 TX).
* PA3 - Normal input (USART2 RX).
* PA9 - Alternate output (USART1 TX).
* PA10 - Normal input (USART1 RX).
*/
#define VAL_GPIOACRL 0x88884B88 /* PA7...PA0 */
#define VAL_GPIOACRH 0x888884B8 /* PA15...PA8 */
#define VAL_GPIOAODR 0xFFFFFFFF
/*
* Port B setup.
* Everything input with pull-up except:
* PB10 - Push Pull output (USB switch).
*/
#define VAL_GPIOBCRL 0x88888888 /* PB7...PB0 */
#define VAL_GPIOBCRH 0x88888388 /* PB15...PB8 */
#define VAL_GPIOBODR 0xFFFFFFFF
/*
* Port C setup.
* Everything input with pull-up except:
* PC13 - Push Pull output (LED).
*/
#define VAL_GPIOCCRL 0x88888888 /* PC7...PC0 */
#define VAL_GPIOCCRH 0x88388888 /* PC15...PC8 */
#define VAL_GPIOCODR 0xFFFFFFFF
/*
* Port D setup.
* Everything input with pull-up except:
* PD0 - Normal input (XTAL).
* PD1 - Normal input (XTAL).
*/
#define VAL_GPIODCRL 0x88888844 /* PD7...PD0 */
#define VAL_GPIODCRH 0x88888888 /* PD15...PD8 */
#define VAL_GPIODODR 0xFFFFFFFF
/*
* Port E setup.
* Everything input with pull-up except:
*/
#define VAL_GPIOECRL 0x88888888 /* PE7...PE0 */
#define VAL_GPIOECRH 0x88888888 /* PE15...PE8 */
#define VAL_GPIOEODR 0xFFFFFFFF
/*
* USB bus activation macro, required by the USB driver.
*/
/* The point is that most of the generic STM32F103* boards
have a 1.5k resistor connected on one end to the D+ line
and on the other end to some pin. Or even a slightly more
complicated "USB enable" circuit, controlled by a pin.
That should go here.
However on some boards (e.g. one that I have), there's no
such hardware. In which case it's better to not do anything.
*/
/*
#define usb_lld_connect_bus(usbp) palClearPad(GPIOB, GPIOB_USB_DISC)
*/
#define usb_lld_connect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_INPUT);
/*
* USB bus de-activation macro, required by the USB driver.
*/
/*
#define usb_lld_disconnect_bus(usbp) palSetPad(GPIOB, GPIOB_USB_DISC)
*/
#define usb_lld_disconnect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_OUTPUT_PUSHPULL); palClearPad(GPIOA, 12);
#if !defined(_FROM_ASM_)
#ifdef __cplusplus
extern "C" {
#endif
void boardInit(void);
#ifdef __cplusplus
}
#endif
#endif /* _FROM_ASM_ */
#endif /* _BOARD_H_ */
/*
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
#ifndef _BOARD_H_
#define _BOARD_H_
/*
* Setup for a Generic STM32F103 board.
*/
/*
* Board identifier.
*/
#define BOARD_GENERIC_STM32_F103
#define BOARD_NAME "Generic STM32F103x board"
/*
* Board frequencies.
*/
#define STM32_LSECLK 32768
#define STM32_HSECLK 8000000
/*
* MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h.
*/
#define STM32F103xB
/*
* IO pins assignments
*/
/* on-board */
#define GPIOC_LED 13
#define GPIOD_OSC_IN 0
#define GPIOD_OSC_OUT 1
/* In case your board has a "USB enable" hardware
controlled by a pin, define it here. (It could be just
a 1.5k resistor connected to D+ line.)
*/
/*
#define GPIOB_USB_DISC 10
*/
/*
* I/O ports initial setup, this configuration is established soon after reset
* in the initialization code.
*
* The digits have the following meaning:
* 0 - Analog input.
* 1 - Push Pull output 10MHz.
* 2 - Push Pull output 2MHz.
* 3 - Push Pull output 50MHz.
* 4 - Digital input.
* 5 - Open Drain output 10MHz.
* 6 - Open Drain output 2MHz.
* 7 - Open Drain output 50MHz.
* 8 - Digital input with PullUp or PullDown resistor depending on ODR.
* 9 - Alternate Push Pull output 10MHz.
* A - Alternate Push Pull output 2MHz.
* B - Alternate Push Pull output 50MHz.
* C - Reserved.
* D - Alternate Open Drain output 10MHz.
* E - Alternate Open Drain output 2MHz.
* F - Alternate Open Drain output 50MHz.
* Please refer to the STM32 Reference Manual for details.
*/
/*
* Port A setup.
* Everything input with pull-up except:
* PA2 - Alternate output (USART2 TX).
* PA3 - Normal input (USART2 RX).
* PA9 - Alternate output (USART1 TX).
* PA10 - Normal input (USART1 RX).
*/
#define VAL_GPIOACRL 0x88884B88 /* PA7...PA0 */
#define VAL_GPIOACRH 0x888884B8 /* PA15...PA8 */
#define VAL_GPIOAODR 0xFFFFFFFF
/*
* Port B setup.
* Everything input with pull-up except:
* PB10 - Push Pull output (USB switch).
*/
#define VAL_GPIOBCRL 0x88888888 /* PB7...PB0 */
#define VAL_GPIOBCRH 0x88888388 /* PB15...PB8 */
#define VAL_GPIOBODR 0xFFFFFFFF
/*
* Port C setup.
* Everything input with pull-up except:
* PC13 - Push Pull output (LED).
*/
#define VAL_GPIOCCRL 0x88888888 /* PC7...PC0 */
#define VAL_GPIOCCRH 0x88388888 /* PC15...PC8 */
#define VAL_GPIOCODR 0xFFFFFFFF
/*
* Port D setup.
* Everything input with pull-up except:
* PD0 - Normal input (XTAL).
* PD1 - Normal input (XTAL).
*/
#define VAL_GPIODCRL 0x88888844 /* PD7...PD0 */
#define VAL_GPIODCRH 0x88888888 /* PD15...PD8 */
#define VAL_GPIODODR 0xFFFFFFFF
/*
* Port E setup.
* Everything input with pull-up except:
*/
#define VAL_GPIOECRL 0x88888888 /* PE7...PE0 */
#define VAL_GPIOECRH 0x88888888 /* PE15...PE8 */
#define VAL_GPIOEODR 0xFFFFFFFF
/*
* USB bus activation macro, required by the USB driver.
*/
/* The point is that most of the generic STM32F103* boards
have a 1.5k resistor connected on one end to the D+ line
and on the other end to some pin. Or even a slightly more
complicated "USB enable" circuit, controlled by a pin.
That should go here.
However on some boards (e.g. one that I have), there's no
such hardware. In which case it's better to not do anything.
*/
/*
#define usb_lld_connect_bus(usbp) palClearPad(GPIOB, GPIOB_USB_DISC)
*/
#define usb_lld_connect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_INPUT);
/*
* USB bus de-activation macro, required by the USB driver.
*/
/*
#define usb_lld_disconnect_bus(usbp) palSetPad(GPIOB, GPIOB_USB_DISC)
*/
#define usb_lld_disconnect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_OUTPUT_PUSHPULL); palClearPad(GPIOA, 12);
#if !defined(_FROM_ASM_)
#ifdef __cplusplus
extern "C" {
#endif
void boardInit(void);
#ifdef __cplusplus
}
#endif
#endif /* _FROM_ASM_ */
#endif /* _BOARD_H_ */

10
keyboards/chibios_test/boards/GENERIC_STM32_F103/board.mk
View file

@ -1,5 +1,5 @@
# List of all the board related files.
BOARDSRC = $(KEYBOARD_PATH)/boards/GENERIC_STM32_F103/board.c
# Required include directories
BOARDINC = $(KEYBOARD_PATH)/boards/GENERIC_STM32_F103
# List of all the board related files.
BOARDSRC = $(KEYBOARD_PATH)/boards/GENERIC_STM32_F103/board.c
# Required include directories
BOARDINC = $(KEYBOARD_PATH)/boards/GENERIC_STM32_F103

210
keyboards/chibios_test/ld/MKL26Z64.ld
View file

@ -1,105 +1,105 @@
/*
* Copyright (C) 2013-2016 Fabio Utzig, http://fabioutzig.com
* (C) 2016 flabbergast <s3+flabbergast@sdfeu.org>
*
* Permission is hereby granted, free of charge, to any person obtaining
* a copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
* OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
/*
* KL26Z64 memory setup.
*/
MEMORY
{
flash0 : org = 0x00000000, len = 0x100
flash1 : org = 0x00000400, len = 0x10
flash2 : org = 0x00000410, len = 62k - 0x410
flash3 : org = 0x0000F800, len = 2k
flash4 : org = 0x00000000, len = 0
flash5 : org = 0x00000000, len = 0
flash6 : org = 0x00000000, len = 0
flash7 : org = 0x00000000, len = 0
ram0 : org = 0x1FFFF800, len = 8k
ram1 : org = 0x00000000, len = 0
ram2 : org = 0x00000000, len = 0
ram3 : org = 0x00000000, len = 0
ram4 : org = 0x00000000, len = 0
ram5 : org = 0x00000000, len = 0
ram6 : org = 0x00000000, len = 0
ram7 : org = 0x00000000, len = 0
}
/* Flash region for the configuration bytes.*/
SECTIONS
{
.cfmprotect : ALIGN(4) SUBALIGN(4)
{
KEEP(*(.cfmconfig))
} > flash1
}
/* For each data/text section two region are defined, a virtual region
and a load region (_LMA suffix).*/
/* Flash region to be used for exception vectors.*/
REGION_ALIAS("VECTORS_FLASH", flash0);
REGION_ALIAS("VECTORS_FLASH_LMA", flash0);
/* Flash region to be used for constructors and destructors.*/
REGION_ALIAS("XTORS_FLASH", flash2);
REGION_ALIAS("XTORS_FLASH_LMA", flash2);
/* Flash region to be used for code text.*/
REGION_ALIAS("TEXT_FLASH", flash2);
REGION_ALIAS("TEXT_FLASH_LMA", flash2);
/* Flash region to be used for read only data.*/
REGION_ALIAS("RODATA_FLASH", flash2);
REGION_ALIAS("RODATA_FLASH_LMA", flash2);
/* Flash region to be used for various.*/
REGION_ALIAS("VARIOUS_FLASH", flash2);
REGION_ALIAS("VARIOUS_FLASH_LMA", flash2);
/* Flash region to be used for RAM(n) initialization data.*/
REGION_ALIAS("RAM_INIT_FLASH_LMA", flash2);
/* RAM region to be used for Main stack. This stack accommodates the processing
of all exceptions and interrupts.*/
REGION_ALIAS("MAIN_STACK_RAM", ram0);
/* RAM region to be used for the process stack. This is the stack used by
the main() function.*/
REGION_ALIAS("PROCESS_STACK_RAM", ram0);
/* RAM region to be used for data segment.*/
REGION_ALIAS("DATA_RAM", ram0);
REGION_ALIAS("DATA_RAM_LMA", flash2);
/* RAM region to be used for BSS segment.*/
REGION_ALIAS("BSS_RAM", ram0);
/* RAM region to be used for the default heap.*/
REGION_ALIAS("HEAP_RAM", ram0);
__eeprom_workarea_start__ = ORIGIN(flash3);
__eeprom_workarea_size__ = LENGTH(flash3);
__eeprom_workarea_end__ = __eeprom_workarea_start__ + __eeprom_workarea_size__;
/* Generic rules inclusion.*/
INCLUDE rules.ld
/*
* Copyright (C) 2013-2016 Fabio Utzig, http://fabioutzig.com
* (C) 2016 flabbergast <s3+flabbergast@sdfeu.org>
*
* Permission is hereby granted, free of charge, to any person obtaining
* a copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
* OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
/*
* KL26Z64 memory setup.
*/
MEMORY
{
flash0 : org = 0x00000000, len = 0x100
flash1 : org = 0x00000400, len = 0x10
flash2 : org = 0x00000410, len = 62k - 0x410
flash3 : org = 0x0000F800, len = 2k
flash4 : org = 0x00000000, len = 0
flash5 : org = 0x00000000, len = 0
flash6 : org = 0x00000000, len = 0
flash7 : org = 0x00000000, len = 0
ram0 : org = 0x1FFFF800, len = 8k
ram1 : org = 0x00000000, len = 0
ram2 : org = 0x00000000, len = 0
ram3 : org = 0x00000000, len = 0
ram4 : org = 0x00000000, len = 0
ram5 : org = 0x00000000, len = 0
ram6 : org = 0x00000000, len = 0
ram7 : org = 0x00000000, len = 0
}
/* Flash region for the configuration bytes.*/
SECTIONS
{
.cfmprotect : ALIGN(4) SUBALIGN(4)
{
KEEP(*(.cfmconfig))
} > flash1
}
/* For each data/text section two region are defined, a virtual region
and a load region (_LMA suffix).*/
/* Flash region to be used for exception vectors.*/
REGION_ALIAS("VECTORS_FLASH", flash0);
REGION_ALIAS("VECTORS_FLASH_LMA", flash0);
/* Flash region to be used for constructors and destructors.*/
REGION_ALIAS("XTORS_FLASH", flash2);
REGION_ALIAS("XTORS_FLASH_LMA", flash2);
/* Flash region to be used for code text.*/
REGION_ALIAS("TEXT_FLASH", flash2);
REGION_ALIAS("TEXT_FLASH_LMA", flash2);
/* Flash region to be used for read only data.*/
REGION_ALIAS("RODATA_FLASH", flash2);
REGION_ALIAS("RODATA_FLASH_LMA", flash2);
/* Flash region to be used for various.*/
REGION_ALIAS("VARIOUS_FLASH", flash2);
REGION_ALIAS("VARIOUS_FLASH_LMA", flash2);
/* Flash region to be used for RAM(n) initialization data.*/
REGION_ALIAS("RAM_INIT_FLASH_LMA", flash2);
/* RAM region to be used for Main stack. This stack accommodates the processing
of all exceptions and interrupts.*/
REGION_ALIAS("MAIN_STACK_RAM", ram0);
/* RAM region to be used for the process stack. This is the stack used by
the main() function.*/
REGION_ALIAS("PROCESS_STACK_RAM", ram0);
/* RAM region to be used for data segment.*/
REGION_ALIAS("DATA_RAM", ram0);
REGION_ALIAS("DATA_RAM_LMA", flash2);
/* RAM region to be used for BSS segment.*/
REGION_ALIAS("BSS_RAM", ram0);
/* RAM region to be used for the default heap.*/
REGION_ALIAS("HEAP_RAM", ram0);
__eeprom_workarea_start__ = ORIGIN(flash3);
__eeprom_workarea_size__ = LENGTH(flash3);
__eeprom_workarea_end__ = __eeprom_workarea_start__ + __eeprom_workarea_size__;
/* Generic rules inclusion.*/
INCLUDE rules.ld

176
keyboards/chibios_test/ld/STM32F103x8_stm32duino_bootloader.ld
View file

@ -1,88 +1,88 @@
/*
ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
/*
* ST32F103xB memory setup for use with the maplemini bootloader.
* You will have to
* #define CORTEX_VTOR_INIT 0x5000
* in your projects chconf.h
*/
MEMORY
{
flash0 : org = 0x08002000, len = 128k - 0x2000
flash1 : org = 0x00000000, len = 0
flash2 : org = 0x00000000, len = 0
flash3 : org = 0x00000000, len = 0
flash4 : org = 0x00000000, len = 0
flash5 : org = 0x00000000, len = 0
flash6 : org = 0x00000000, len = 0
flash7 : org = 0x00000000, len = 0
ram0 : org = 0x20000000, len = 20k
ram1 : org = 0x00000000, len = 0
ram2 : org = 0x00000000, len = 0
ram3 : org = 0x00000000, len = 0
ram4 : org = 0x00000000, len = 0
ram5 : org = 0x00000000, len = 0
ram6 : org = 0x00000000, len = 0
ram7 : org = 0x00000000, len = 0
}
/* For each data/text section two region are defined, a virtual region
and a load region (_LMA suffix).*/
/* Flash region to be used for exception vectors.*/
REGION_ALIAS("VECTORS_FLASH", flash0);
REGION_ALIAS("VECTORS_FLASH_LMA", flash0);
/* Flash region to be used for constructors and destructors.*/
REGION_ALIAS("XTORS_FLASH", flash0);
REGION_ALIAS("XTORS_FLASH_LMA", flash0);
/* Flash region to be used for code text.*/
REGION_ALIAS("TEXT_FLASH", flash0);
REGION_ALIAS("TEXT_FLASH_LMA", flash0);
/* Flash region to be used for read only data.*/
REGION_ALIAS("RODATA_FLASH", flash0);
REGION_ALIAS("RODATA_FLASH_LMA", flash0);
/* Flash region to be used for various.*/
REGION_ALIAS("VARIOUS_FLASH", flash0);
REGION_ALIAS("VARIOUS_FLASH_LMA", flash0);
/* Flash region to be used for RAM(n) initialization data.*/
REGION_ALIAS("RAM_INIT_FLASH_LMA", flash0);
/* RAM region to be used for Main stack. This stack accommodates the processing
of all exceptions and interrupts.*/
REGION_ALIAS("MAIN_STACK_RAM", ram0);
/* RAM region to be used for the process stack. This is the stack used by
the main() function.*/
REGION_ALIAS("PROCESS_STACK_RAM", ram0);
/* RAM region to be used for data segment.*/
REGION_ALIAS("DATA_RAM", ram0);
REGION_ALIAS("DATA_RAM_LMA", flash0);
/* RAM region to be used for BSS segment.*/
REGION_ALIAS("BSS_RAM", ram0);
/* RAM region to be used for the default heap.*/
REGION_ALIAS("HEAP_RAM", ram0);
/* Generic rules inclusion.*/
INCLUDE rules.ld
/*
ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
/*
* ST32F103xB memory setup for use with the maplemini bootloader.
* You will have to
* #define CORTEX_VTOR_INIT 0x5000
* in your projects chconf.h
*/
MEMORY
{
flash0 : org = 0x08002000, len = 128k - 0x2000
flash1 : org = 0x00000000, len = 0
flash2 : org = 0x00000000, len = 0
flash3 : org = 0x00000000, len = 0
flash4 : org = 0x00000000, len = 0
flash5 : org = 0x00000000, len = 0
flash6 : org = 0x00000000, len = 0
flash7 : org = 0x00000000, len = 0
ram0 : org = 0x20000000, len = 20k
ram1 : org = 0x00000000, len = 0
ram2 : org = 0x00000000, len = 0
ram3 : org = 0x00000000, len = 0
ram4 : org = 0x00000000, len = 0
ram5 : org = 0x00000000, len = 0
ram6 : org = 0x00000000, len = 0
ram7 : org = 0x00000000, len = 0
}
/* For each data/text section two region are defined, a virtual region
and a load region (_LMA suffix).*/
/* Flash region to be used for exception vectors.*/
REGION_ALIAS("VECTORS_FLASH", flash0);
REGION_ALIAS("VECTORS_FLASH_LMA", flash0);
/* Flash region to be used for constructors and destructors.*/
REGION_ALIAS("XTORS_FLASH", flash0);
REGION_ALIAS("XTORS_FLASH_LMA", flash0);
/* Flash region to be used for code text.*/
REGION_ALIAS("TEXT_FLASH", flash0);
REGION_ALIAS("TEXT_FLASH_LMA", flash0);
/* Flash region to be used for read only data.*/
REGION_ALIAS("RODATA_FLASH", flash0);
REGION_ALIAS("RODATA_FLASH_LMA", flash0);
/* Flash region to be used for various.*/
REGION_ALIAS("VARIOUS_FLASH", flash0);
REGION_ALIAS("VARIOUS_FLASH_LMA", flash0);
/* Flash region to be used for RAM(n) initialization data.*/
REGION_ALIAS("RAM_INIT_FLASH_LMA", flash0);
/* RAM region to be used for Main stack. This stack accommodates the processing
of all exceptions and interrupts.*/
REGION_ALIAS("MAIN_STACK_RAM", ram0);
/* RAM region to be used for the process stack. This is the stack used by
the main() function.*/
REGION_ALIAS("PROCESS_STACK_RAM", ram0);
/* RAM region to be used for data segment.*/
REGION_ALIAS("DATA_RAM", ram0);
REGION_ALIAS("DATA_RAM_LMA", flash0);
/* RAM region to be used for BSS segment.*/
REGION_ALIAS("BSS_RAM", ram0);
/* RAM region to be used for the default heap.*/
REGION_ALIAS("HEAP_RAM", ram0);
/* Generic rules inclusion.*/
INCLUDE rules.ld

342
keyboards/chibios_test/stm32_f072_onekey/mcuconf.h
View file

@ -1,171 +1,171 @@
/*
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
#ifndef _MCUCONF_H_
#define _MCUCONF_H_
/*
* STM32F0xx drivers configuration.
* The following settings override the default settings present in
* the various device driver implementation headers.
* Note that the settings for each driver only have effect if the whole
* driver is enabled in halconf.h.
*
* IRQ priorities:
* 3...0 Lowest...Highest.
*
* DMA priorities:
* 0...3 Lowest...Highest.
*/
#define STM32F0xx_MCUCONF
/*
* HAL driver system settings.
*/
#define STM32_NO_INIT FALSE
#define STM32_PVD_ENABLE FALSE
#define STM32_PLS STM32_PLS_LEV0
#define STM32_HSI_ENABLED TRUE
#define STM32_HSI14_ENABLED TRUE
#define STM32_HSI48_ENABLED FALSE
#define STM32_LSI_ENABLED TRUE
#define STM32_HSE_ENABLED FALSE
#define STM32_LSE_ENABLED FALSE
#define STM32_SW STM32_SW_PLL
#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2
#define STM32_PREDIV_VALUE 1
#define STM32_PLLMUL_VALUE 12
#define STM32_HPRE STM32_HPRE_DIV1
#define STM32_PPRE STM32_PPRE_DIV1
#define STM32_ADCSW STM32_ADCSW_HSI14
#define STM32_ADCPRE STM32_ADCPRE_DIV4
#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK
#define STM32_ADCPRE STM32_ADCPRE_DIV4
#define STM32_ADCSW STM32_ADCSW_HSI14
#define STM32_USBSW STM32_USBSW_HSI48
#define STM32_CECSW STM32_CECSW_HSI
#define STM32_I2C1SW STM32_I2C1SW_HSI
#define STM32_USART1SW STM32_USART1SW_PCLK
#define STM32_RTCSEL STM32_RTCSEL_LSI
/*
* ADC driver system settings.
*/
#define STM32_ADC_USE_ADC1 FALSE
#define STM32_ADC_ADC1_DMA_PRIORITY 2
#define STM32_ADC_IRQ_PRIORITY 2
#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2
/*
* EXT driver system settings.
*/
#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3
#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3
#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3
#define STM32_EXT_EXTI16_IRQ_PRIORITY 3
#define STM32_EXT_EXTI17_IRQ_PRIORITY 3
/*
* GPT driver system settings.
*/
#define STM32_GPT_USE_TIM1 FALSE
#define STM32_GPT_USE_TIM2 FALSE
#define STM32_GPT_USE_TIM3 FALSE
#define STM32_GPT_USE_TIM14 FALSE
#define STM32_GPT_TIM1_IRQ_PRIORITY 2
#define STM32_GPT_TIM2_IRQ_PRIORITY 2
#define STM32_GPT_TIM3_IRQ_PRIORITY 2
#define STM32_GPT_TIM14_IRQ_PRIORITY 2
/*
* I2C driver system settings.
*/
#define STM32_I2C_USE_I2C1 FALSE
#define STM32_I2C_USE_I2C2 FALSE
#define STM32_I2C_BUSY_TIMEOUT 50
#define STM32_I2C_I2C1_IRQ_PRIORITY 3
#define STM32_I2C_I2C2_IRQ_PRIORITY 3
#define STM32_I2C_USE_DMA TRUE
#define STM32_I2C_I2C1_DMA_PRIORITY 1
#define STM32_I2C_I2C2_DMA_PRIORITY 1
#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")
/*
* ICU driver system settings.
*/
#define STM32_ICU_USE_TIM1 FALSE
#define STM32_ICU_USE_TIM2 FALSE
#define STM32_ICU_USE_TIM3 FALSE
#define STM32_ICU_TIM1_IRQ_PRIORITY 3
#define STM32_ICU_TIM2_IRQ_PRIORITY 3
#define STM32_ICU_TIM3_IRQ_PRIORITY 3
/*
* PWM driver system settings.
*/
#define STM32_PWM_USE_ADVANCED FALSE
#define STM32_PWM_USE_TIM1 FALSE
#define STM32_PWM_USE_TIM2 FALSE
#define STM32_PWM_USE_TIM3 FALSE
#define STM32_PWM_TIM1_IRQ_PRIORITY 3
#define STM32_PWM_TIM2_IRQ_PRIORITY 3
#define STM32_PWM_TIM3_IRQ_PRIORITY 3
/*
* SERIAL driver system settings.
*/
#define STM32_SERIAL_USE_USART1 FALSE
#define STM32_SERIAL_USE_USART2 FALSE
#define STM32_SERIAL_USART1_PRIORITY 3
#define STM32_SERIAL_USART2_PRIORITY 3
/*
* SPI driver system settings.
*/
#define STM32_SPI_USE_SPI1 FALSE
#define STM32_SPI_USE_SPI2 FALSE
#define STM32_SPI_SPI1_DMA_PRIORITY 1
#define STM32_SPI_SPI2_DMA_PRIORITY 1
#define STM32_SPI_SPI1_IRQ_PRIORITY 2
#define STM32_SPI_SPI2_IRQ_PRIORITY 2
#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
/*
* ST driver system settings.
*/
#define STM32_ST_IRQ_PRIORITY 2
#define STM32_ST_USE_TIMER 2
/*
* UART driver system settings.
*/
#define STM32_UART_USE_USART1 FALSE
#define STM32_UART_USE_USART2 FALSE
#define STM32_UART_USART1_IRQ_PRIORITY 3
#define STM32_UART_USART2_IRQ_PRIORITY 3
#define STM32_UART_USART1_DMA_PRIORITY 0
#define STM32_UART_USART2_DMA_PRIORITY 0
#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
/*
* USB driver system settings.
*/
#define STM32_USB_USE_USB1 TRUE
#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE
#define STM32_USB_USB1_LP_IRQ_PRIORITY 3
#endif /* _MCUCONF_H_ */
/*
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
#ifndef _MCUCONF_H_
#define _MCUCONF_H_
/*
* STM32F0xx drivers configuration.
* The following settings override the default settings present in
* the various device driver implementation headers.
* Note that the settings for each driver only have effect if the whole
* driver is enabled in halconf.h.
*
* IRQ priorities:
* 3...0 Lowest...Highest.
*
* DMA priorities:
* 0...3 Lowest...Highest.
*/
#define STM32F0xx_MCUCONF
/*
* HAL driver system settings.
*/
#define STM32_NO_INIT FALSE
#define STM32_PVD_ENABLE FALSE
#define STM32_PLS STM32_PLS_LEV0
#define STM32_HSI_ENABLED TRUE
#define STM32_HSI14_ENABLED TRUE
#define STM32_HSI48_ENABLED FALSE
#define STM32_LSI_ENABLED TRUE
#define STM32_HSE_ENABLED FALSE
#define STM32_LSE_ENABLED FALSE
#define STM32_SW STM32_SW_PLL
#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2
#define STM32_PREDIV_VALUE 1
#define STM32_PLLMUL_VALUE 12
#define STM32_HPRE STM32_HPRE_DIV1
#define STM32_PPRE STM32_PPRE_DIV1
#define STM32_ADCSW STM32_ADCSW_HSI14
#define STM32_ADCPRE STM32_ADCPRE_DIV4
#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK
#define STM32_ADCPRE STM32_ADCPRE_DIV4
#define STM32_ADCSW STM32_ADCSW_HSI14
#define STM32_USBSW STM32_USBSW_HSI48
#define STM32_CECSW STM32_CECSW_HSI
#define STM32_I2C1SW STM32_I2C1SW_HSI
#define STM32_USART1SW STM32_USART1SW_PCLK
#define STM32_RTCSEL STM32_RTCSEL_LSI
/*
* ADC driver system settings.
*/
#define STM32_ADC_USE_ADC1 FALSE
#define STM32_ADC_ADC1_DMA_PRIORITY 2
#define STM32_ADC_IRQ_PRIORITY 2
#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2
/*
* EXT driver system settings.
*/
#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3
#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3
#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3
#define STM32_EXT_EXTI16_IRQ_PRIORITY 3
#define STM32_EXT_EXTI17_IRQ_PRIORITY 3
/*
* GPT driver system settings.
*/
#define STM32_GPT_USE_TIM1 FALSE
#define STM32_GPT_USE_TIM2 FALSE
#define STM32_GPT_USE_TIM3 FALSE
#define STM32_GPT_USE_TIM14 FALSE
#define STM32_GPT_TIM1_IRQ_PRIORITY 2
#define STM32_GPT_TIM2_IRQ_PRIORITY 2
#define STM32_GPT_TIM3_IRQ_PRIORITY 2
#define STM32_GPT_TIM14_IRQ_PRIORITY 2
/*
* I2C driver system settings.
*/
#define STM32_I2C_USE_I2C1 FALSE
#define STM32_I2C_USE_I2C2 FALSE
#define STM32_I2C_BUSY_TIMEOUT 50
#define STM32_I2C_I2C1_IRQ_PRIORITY 3
#define STM32_I2C_I2C2_IRQ_PRIORITY 3
#define STM32_I2C_USE_DMA TRUE
#define STM32_I2C_I2C1_DMA_PRIORITY 1
#define STM32_I2C_I2C2_DMA_PRIORITY 1
#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")
/*
* ICU driver system settings.
*/
#define STM32_ICU_USE_TIM1 FALSE
#define STM32_ICU_USE_TIM2 FALSE
#define STM32_ICU_USE_TIM3 FALSE
#define STM32_ICU_TIM1_IRQ_PRIORITY 3
#define STM32_ICU_TIM2_IRQ_PRIORITY 3
#define STM32_ICU_TIM3_IRQ_PRIORITY 3
/*
* PWM driver system settings.
*/
#define STM32_PWM_USE_ADVANCED FALSE
#define STM32_PWM_USE_TIM1 FALSE
#define STM32_PWM_USE_TIM2 FALSE
#define STM32_PWM_USE_TIM3 FALSE
#define STM32_PWM_TIM1_IRQ_PRIORITY 3
#define STM32_PWM_TIM2_IRQ_PRIORITY 3
#define STM32_PWM_TIM3_IRQ_PRIORITY 3
/*
* SERIAL driver system settings.
*/
#define STM32_SERIAL_USE_USART1 FALSE
#define STM32_SERIAL_USE_USART2 FALSE
#define STM32_SERIAL_USART1_PRIORITY 3
#define STM32_SERIAL_USART2_PRIORITY 3
/*
* SPI driver system settings.
*/
#define STM32_SPI_USE_SPI1 FALSE
#define STM32_SPI_USE_SPI2 FALSE
#define STM32_SPI_SPI1_DMA_PRIORITY 1
#define STM32_SPI_SPI2_DMA_PRIORITY 1
#define STM32_SPI_SPI1_IRQ_PRIORITY 2
#define STM32_SPI_SPI2_IRQ_PRIORITY 2
#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
/*
* ST driver system settings.
*/
#define STM32_ST_IRQ_PRIORITY 2
#define STM32_ST_USE_TIMER 2
/*
* UART driver system settings.
*/
#define STM32_UART_USE_USART1 FALSE
#define STM32_UART_USE_USART2 FALSE
#define STM32_UART_USART1_IRQ_PRIORITY 3
#define STM32_UART_USART2_IRQ_PRIORITY 3
#define STM32_UART_USART1_DMA_PRIORITY 0
#define STM32_UART_USART2_DMA_PRIORITY 0
#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
/*
* USB driver system settings.
*/
#define STM32_USB_USE_USB1 TRUE
#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE
#define STM32_USB_USB1_LP_IRQ_PRIORITY 3
#endif /* _MCUCONF_H_ */

418
keyboards/chibios_test/stm32_f103_onekey/mcuconf.h
View file

@ -1,209 +1,209 @@
/*
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
#ifndef _MCUCONF_H_
#define _MCUCONF_H_
#define STM32F103_MCUCONF
/*
* STM32F103 drivers configuration.
* The following settings override the default settings present in
* the various device driver implementation headers.
* Note that the settings for each driver only have effect if the whole
* driver is enabled in halconf.h.
*
* IRQ priorities:
* 15...0 Lowest...Highest.
*
* DMA priorities:
* 0...3 Lowest...Highest.
*/
/*
* HAL driver system settings.
*/
#define STM32_NO_INIT FALSE
#define STM32_HSI_ENABLED TRUE
#define STM32_LSI_ENABLED FALSE
#define STM32_HSE_ENABLED TRUE
#define STM32_LSE_ENABLED FALSE
#define STM32_SW STM32_SW_PLL
#define STM32_PLLSRC STM32_PLLSRC_HSE
#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1
#define STM32_PLLMUL_VALUE 9
#define STM32_HPRE STM32_HPRE_DIV1
#define STM32_PPRE1 STM32_PPRE1_DIV2
#define STM32_PPRE2 STM32_PPRE2_DIV2
#define STM32_ADCPRE STM32_ADCPRE_DIV4
#define STM32_USB_CLOCK_REQUIRED TRUE
#define STM32_USBPRE STM32_USBPRE_DIV1P5
#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK
#define STM32_RTCSEL STM32_RTCSEL_HSEDIV
#define STM32_PVD_ENABLE FALSE
#define STM32_PLS STM32_PLS_LEV0
/*
* ADC driver system settings.
*/
#define STM32_ADC_USE_ADC1 FALSE
#define STM32_ADC_ADC1_DMA_PRIORITY 2
#define STM32_ADC_ADC1_IRQ_PRIORITY 6
/*
* CAN driver system settings.
*/
#define STM32_CAN_USE_CAN1 FALSE
#define STM32_CAN_CAN1_IRQ_PRIORITY 11
/*
* EXT driver system settings.
*/
#define STM32_EXT_EXTI0_IRQ_PRIORITY 6
#define STM32_EXT_EXTI1_IRQ_PRIORITY 6
#define STM32_EXT_EXTI2_IRQ_PRIORITY 6
#define STM32_EXT_EXTI3_IRQ_PRIORITY 6
#define STM32_EXT_EXTI4_IRQ_PRIORITY 6
#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6
#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6
#define STM32_EXT_EXTI16_IRQ_PRIORITY 6
#define STM32_EXT_EXTI17_IRQ_PRIORITY 6
#define STM32_EXT_EXTI18_IRQ_PRIORITY 6
#define STM32_EXT_EXTI19_IRQ_PRIORITY 6
/*
* GPT driver system settings.
*/
#define STM32_GPT_USE_TIM1 FALSE
#define STM32_GPT_USE_TIM2 FALSE
#define STM32_GPT_USE_TIM3 FALSE
#define STM32_GPT_USE_TIM4 FALSE
#define STM32_GPT_USE_TIM5 FALSE
#define STM32_GPT_USE_TIM8 FALSE
#define STM32_GPT_TIM1_IRQ_PRIORITY 7
#define STM32_GPT_TIM2_IRQ_PRIORITY 7
#define STM32_GPT_TIM3_IRQ_PRIORITY 7
#define STM32_GPT_TIM4_IRQ_PRIORITY 7
#define STM32_GPT_TIM5_IRQ_PRIORITY 7
#define STM32_GPT_TIM8_IRQ_PRIORITY 7
/*
* I2C driver system settings.
*/
#define STM32_I2C_USE_I2C1 FALSE
#define STM32_I2C_USE_I2C2 FALSE
#define STM32_I2C_BUSY_TIMEOUT 50
#define STM32_I2C_I2C1_IRQ_PRIORITY 5
#define STM32_I2C_I2C2_IRQ_PRIORITY 5
#define STM32_I2C_I2C1_DMA_PRIORITY 3
#define STM32_I2C_I2C2_DMA_PRIORITY 3
#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")
/*
* ICU driver system settings.
*/
#define STM32_ICU_USE_TIM1 FALSE
#define STM32_ICU_USE_TIM2 FALSE
#define STM32_ICU_USE_TIM3 FALSE
#define STM32_ICU_USE_TIM4 FALSE
#define STM32_ICU_USE_TIM5 FALSE
#define STM32_ICU_USE_TIM8 FALSE
#define STM32_ICU_TIM1_IRQ_PRIORITY 7
#define STM32_ICU_TIM2_IRQ_PRIORITY 7
#define STM32_ICU_TIM3_IRQ_PRIORITY 7
#define STM32_ICU_TIM4_IRQ_PRIORITY 7
#define STM32_ICU_TIM5_IRQ_PRIORITY 7
#define STM32_ICU_TIM8_IRQ_PRIORITY 7
/*
* PWM driver system settings.
*/
#define STM32_PWM_USE_ADVANCED FALSE
#define STM32_PWM_USE_TIM1 FALSE
#define STM32_PWM_USE_TIM2 FALSE
#define STM32_PWM_USE_TIM3 FALSE
#define STM32_PWM_USE_TIM4 FALSE
#define STM32_PWM_USE_TIM5 FALSE
#define STM32_PWM_USE_TIM8 FALSE
#define STM32_PWM_TIM1_IRQ_PRIORITY 7
#define STM32_PWM_TIM2_IRQ_PRIORITY 7
#define STM32_PWM_TIM3_IRQ_PRIORITY 7
#define STM32_PWM_TIM4_IRQ_PRIORITY 7
#define STM32_PWM_TIM5_IRQ_PRIORITY 7
#define STM32_PWM_TIM8_IRQ_PRIORITY 7
/*
* RTC driver system settings.
*/
#define STM32_RTC_IRQ_PRIORITY 15
/*
* SERIAL driver system settings.
*/
#define STM32_SERIAL_USE_USART1 FALSE
#define STM32_SERIAL_USE_USART2 FALSE
#define STM32_SERIAL_USE_USART3 FALSE
#define STM32_SERIAL_USE_UART4 FALSE
#define STM32_SERIAL_USE_UART5 FALSE
#define STM32_SERIAL_USART1_PRIORITY 12
#define STM32_SERIAL_USART2_PRIORITY 12
#define STM32_SERIAL_USART3_PRIORITY 12
#define STM32_SERIAL_UART4_PRIORITY 12
#define STM32_SERIAL_UART5_PRIORITY 12
/*
* SPI driver system settings.
*/
#define STM32_SPI_USE_SPI1 FALSE
#define STM32_SPI_USE_SPI2 FALSE
#define STM32_SPI_USE_SPI3 FALSE
#define STM32_SPI_SPI1_DMA_PRIORITY 1
#define STM32_SPI_SPI2_DMA_PRIORITY 1
#define STM32_SPI_SPI3_DMA_PRIORITY 1
#define STM32_SPI_SPI1_IRQ_PRIORITY 10
#define STM32_SPI_SPI2_IRQ_PRIORITY 10
#define STM32_SPI_SPI3_IRQ_PRIORITY 10
#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
/*
* ST driver system settings.
*/
#define STM32_ST_IRQ_PRIORITY 8
#define STM32_ST_USE_TIMER 2
/*
* UART driver system settings.
*/
#define STM32_UART_USE_USART1 FALSE
#define STM32_UART_USE_USART2 FALSE
#define STM32_UART_USE_USART3 FALSE
#define STM32_UART_USART1_IRQ_PRIORITY 12
#define STM32_UART_USART2_IRQ_PRIORITY 12
#define STM32_UART_USART3_IRQ_PRIORITY 12
#define STM32_UART_USART1_DMA_PRIORITY 0
#define STM32_UART_USART2_DMA_PRIORITY 0
#define STM32_UART_USART3_DMA_PRIORITY 0
#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
/*
* USB driver system settings.
*/
#define STM32_USB_USE_USB1 TRUE
#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE
#define STM32_USB_USB1_HP_IRQ_PRIORITY 13
#define STM32_USB_USB1_LP_IRQ_PRIORITY 14
#endif /* _MCUCONF_H_ */
/*
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
#ifndef _MCUCONF_H_
#define _MCUCONF_H_
#define STM32F103_MCUCONF
/*
* STM32F103 drivers configuration.
* The following settings override the default settings present in
* the various device driver implementation headers.
* Note that the settings for each driver only have effect if the whole
* driver is enabled in halconf.h.
*
* IRQ priorities:
* 15...0 Lowest...Highest.
*
* DMA priorities:
* 0...3 Lowest...Highest.
*/
/*
* HAL driver system settings.
*/
#define STM32_NO_INIT FALSE
#define STM32_HSI_ENABLED TRUE
#define STM32_LSI_ENABLED FALSE
#define STM32_HSE_ENABLED TRUE
#define STM32_LSE_ENABLED FALSE
#define STM32_SW STM32_SW_PLL
#define STM32_PLLSRC STM32_PLLSRC_HSE
#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1
#define STM32_PLLMUL_VALUE 9
#define STM32_HPRE STM32_HPRE_DIV1
#define STM32_PPRE1 STM32_PPRE1_DIV2
#define STM32_PPRE2 STM32_PPRE2_DIV2
#define STM32_ADCPRE STM32_ADCPRE_DIV4
#define STM32_USB_CLOCK_REQUIRED TRUE
#define STM32_USBPRE STM32_USBPRE_DIV1P5
#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK
#define STM32_RTCSEL STM32_RTCSEL_HSEDIV
#define STM32_PVD_ENABLE FALSE
#define STM32_PLS STM32_PLS_LEV0
/*
* ADC driver system settings.
*/
#define STM32_ADC_USE_ADC1 FALSE
#define STM32_ADC_ADC1_DMA_PRIORITY 2
#define STM32_ADC_ADC1_IRQ_PRIORITY 6
/*
* CAN driver system settings.
*/
#define STM32_CAN_USE_CAN1 FALSE
#define STM32_CAN_CAN1_IRQ_PRIORITY 11
/*
* EXT driver system settings.
*/
#define STM32_EXT_EXTI0_IRQ_PRIORITY 6
#define STM32_EXT_EXTI1_IRQ_PRIORITY 6
#define STM32_EXT_EXTI2_IRQ_PRIORITY 6
#define STM32_EXT_EXTI3_IRQ_PRIORITY 6
#define STM32_EXT_EXTI4_IRQ_PRIORITY 6
#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6
#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6
#define STM32_EXT_EXTI16_IRQ_PRIORITY 6
#define STM32_EXT_EXTI17_IRQ_PRIORITY 6
#define STM32_EXT_EXTI18_IRQ_PRIORITY 6
#define STM32_EXT_EXTI19_IRQ_PRIORITY 6
/*
* GPT driver system settings.
*/
#define STM32_GPT_USE_TIM1 FALSE
#define STM32_GPT_USE_TIM2 FALSE
#define STM32_GPT_USE_TIM3 FALSE
#define STM32_GPT_USE_TIM4 FALSE
#define STM32_GPT_USE_TIM5 FALSE
#define STM32_GPT_USE_TIM8 FALSE
#define STM32_GPT_TIM1_IRQ_PRIORITY 7
#define STM32_GPT_TIM2_IRQ_PRIORITY 7
#define STM32_GPT_TIM3_IRQ_PRIORITY 7
#define STM32_GPT_TIM4_IRQ_PRIORITY 7
#define STM32_GPT_TIM5_IRQ_PRIORITY 7
#define STM32_GPT_TIM8_IRQ_PRIORITY 7
/*
* I2C driver system settings.
*/
#define STM32_I2C_USE_I2C1 FALSE
#define STM32_I2C_USE_I2C2 FALSE
#define STM32_I2C_BUSY_TIMEOUT 50
#define STM32_I2C_I2C1_IRQ_PRIORITY 5
#define STM32_I2C_I2C2_IRQ_PRIORITY 5
#define STM32_I2C_I2C1_DMA_PRIORITY 3
#define STM32_I2C_I2C2_DMA_PRIORITY 3
#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")
/*
* ICU driver system settings.
*/
#define STM32_ICU_USE_TIM1 FALSE
#define STM32_ICU_USE_TIM2 FALSE
#define STM32_ICU_USE_TIM3 FALSE
#define STM32_ICU_USE_TIM4 FALSE
#define STM32_ICU_USE_TIM5 FALSE
#define STM32_ICU_USE_TIM8 FALSE
#define STM32_ICU_TIM1_IRQ_PRIORITY 7
#define STM32_ICU_TIM2_IRQ_PRIORITY 7
#define STM32_ICU_TIM3_IRQ_PRIORITY 7
#define STM32_ICU_TIM4_IRQ_PRIORITY 7
#define STM32_ICU_TIM5_IRQ_PRIORITY 7
#define STM32_ICU_TIM8_IRQ_PRIORITY 7
/*
* PWM driver system settings.
*/
#define STM32_PWM_USE_ADVANCED FALSE
#define STM32_PWM_USE_TIM1 FALSE
#define STM32_PWM_USE_TIM2 FALSE
#define STM32_PWM_USE_TIM3 FALSE
#define STM32_PWM_USE_TIM4 FALSE
#define STM32_PWM_USE_TIM5 FALSE
#define STM32_PWM_USE_TIM8 FALSE
#define STM32_PWM_TIM1_IRQ_PRIORITY 7
#define STM32_PWM_TIM2_IRQ_PRIORITY 7
#define STM32_PWM_TIM3_IRQ_PRIORITY 7
#define STM32_PWM_TIM4_IRQ_PRIORITY 7
#define STM32_PWM_TIM5_IRQ_PRIORITY 7
#define STM32_PWM_TIM8_IRQ_PRIORITY 7
/*
* RTC driver system settings.
*/
#define STM32_RTC_IRQ_PRIORITY 15
/*
* SERIAL driver system settings.
*/
#define STM32_SERIAL_USE_USART1 FALSE
#define STM32_SERIAL_USE_USART2 FALSE
#define STM32_SERIAL_USE_USART3 FALSE
#define STM32_SERIAL_USE_UART4 FALSE
#define STM32_SERIAL_USE_UART5 FALSE
#define STM32_SERIAL_USART1_PRIORITY 12
#define STM32_SERIAL_USART2_PRIORITY 12
#define STM32_SERIAL_USART3_PRIORITY 12
#define STM32_SERIAL_UART4_PRIORITY 12
#define STM32_SERIAL_UART5_PRIORITY 12
/*
* SPI driver system settings.
*/
#define STM32_SPI_USE_SPI1 FALSE
#define STM32_SPI_USE_SPI2 FALSE
#define STM32_SPI_USE_SPI3 FALSE
#define STM32_SPI_SPI1_DMA_PRIORITY 1
#define STM32_SPI_SPI2_DMA_PRIORITY 1
#define STM32_SPI_SPI3_DMA_PRIORITY 1
#define STM32_SPI_SPI1_IRQ_PRIORITY 10
#define STM32_SPI_SPI2_IRQ_PRIORITY 10
#define STM32_SPI_SPI3_IRQ_PRIORITY 10
#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
/*
* ST driver system settings.
*/
#define STM32_ST_IRQ_PRIORITY 8
#define STM32_ST_USE_TIMER 2
/*
* UART driver system settings.
*/
#define STM32_UART_USE_USART1 FALSE
#define STM32_UART_USE_USART2 FALSE
#define STM32_UART_USE_USART3 FALSE
#define STM32_UART_USART1_IRQ_PRIORITY 12
#define STM32_UART_USART2_IRQ_PRIORITY 12
#define STM32_UART_USART3_IRQ_PRIORITY 12
#define STM32_UART_USART1_DMA_PRIORITY 0
#define STM32_UART_USART2_DMA_PRIORITY 0
#define STM32_UART_USART3_DMA_PRIORITY 0
#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
/*
* USB driver system settings.
*/
#define STM32_USB_USE_USB1 TRUE
#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE
#define STM32_USB_USB1_HP_IRQ_PRIORITY 13
#define STM32_USB_USB1_LP_IRQ_PRIORITY 14
#endif /* _MCUCONF_H_ */

1048
keyboards/chibios_test/teensy_lc_onekey/chconf.h
View file

File diff suppressed because it is too large Load diff

374
keyboards/chibios_test/teensy_lc_onekey/halconf.h
View file

@ -1,187 +1,187 @@
/*
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
/**
* @file templates/halconf.h
* @brief HAL configuration header.
* @details HAL configuration file, this file allows to enable or disable the
* various device drivers from your application. You may also use
* this file in order to override the device drivers default settings.
*
* @addtogroup HAL_CONF
* @{
*/
#ifndef _HALCONF_H_
#define _HALCONF_H_
#include "mcuconf.h"
/**
* @brief Enables the PAL subsystem.
*/
#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
#define HAL_USE_PAL TRUE
#endif
/**
* @brief Enables the ADC subsystem.
*/
#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
#define HAL_USE_ADC FALSE
#endif
/**
* @brief Enables the CAN subsystem.
*/
#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
#define HAL_USE_CAN FALSE
#endif
/**
* @brief Enables the DAC subsystem.
*/
#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
#define HAL_USE_DAC FALSE
#endif
/**
* @brief Enables the EXT subsystem.
*/
#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
#define HAL_USE_EXT FALSE
#endif
/**
* @brief Enables the GPT subsystem.
*/
#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
#define HAL_USE_GPT FALSE
#endif
/**
* @brief Enables the I2C subsystem.
*/
#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
#define HAL_USE_I2C FALSE
#endif
/**
* @brief Enables the I2S subsystem.
*/
#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
#define HAL_USE_I2S FALSE
#endif
/**
* @brief Enables the ICU subsystem.
*/
#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
#define HAL_USE_ICU FALSE
#endif
/**
* @brief Enables the MAC subsystem.
*/
#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
#define HAL_USE_MAC FALSE
#endif
/**
* @brief Enables the MMC_SPI subsystem.
*/
#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
#define HAL_USE_MMC_SPI FALSE
#endif
/**
* @brief Enables the PWM subsystem.
*/
#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
#define HAL_USE_PWM FALSE
#endif
/**
* @brief Enables the RTC subsystem.
*/
#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
#define HAL_USE_RTC FALSE
#endif
/**
* @brief Enables the SDC subsystem.
*/
#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
#define HAL_USE_SDC FALSE
#endif
/**
* @brief Enables the SERIAL subsystem.
*/
#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
#define HAL_USE_SERIAL FALSE
#endif
/**
* @brief Enables the SERIAL over USB subsystem.
*/
#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
#define HAL_USE_SERIAL_USB FALSE
#endif
/**
* @brief Enables the SPI subsystem.
*/
#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
#define HAL_USE_SPI FALSE
#endif
/**
* @brief Enables the UART subsystem.
*/
#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
#define HAL_USE_UART FALSE
#endif
/**
* @brief Enables the USB subsystem.
*/
#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
#define HAL_USE_USB TRUE
#endif
/**
* @brief Enables the WDG subsystem.
*/
#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
#define HAL_USE_WDG FALSE
#endif
/*===========================================================================*/
/* USB driver related settings. */
/*===========================================================================*/
/**
* @brief Enables synchronous APIs.
* @note Disabling this option saves both code and data space.
*/
#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
#define USB_USE_WAIT TRUE
#endif
#endif /* _HALCONF_H_ */
/** @} */
/*
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
/**
* @file templates/halconf.h
* @brief HAL configuration header.
* @details HAL configuration file, this file allows to enable or disable the
* various device drivers from your application. You may also use
* this file in order to override the device drivers default settings.
*
* @addtogroup HAL_CONF
* @{
*/
#ifndef _HALCONF_H_
#define _HALCONF_H_
#include "mcuconf.h"
/**
* @brief Enables the PAL subsystem.
*/
#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
#define HAL_USE_PAL TRUE
#endif
/**
* @brief Enables the ADC subsystem.
*/
#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
#define HAL_USE_ADC FALSE
#endif
/**
* @brief Enables the CAN subsystem.
*/
#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
#define HAL_USE_CAN FALSE
#endif
/**
* @brief Enables the DAC subsystem.
*/
#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
#define HAL_USE_DAC FALSE
#endif
/**
* @brief Enables the EXT subsystem.
*/
#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
#define HAL_USE_EXT FALSE
#endif
/**
* @brief Enables the GPT subsystem.
*/
#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
#define HAL_USE_GPT FALSE
#endif
/**
* @brief Enables the I2C subsystem.
*/
#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
#define HAL_USE_I2C FALSE
#endif
/**
* @brief Enables the I2S subsystem.
*/
#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
#define HAL_USE_I2S FALSE
#endif
/**
* @brief Enables the ICU subsystem.
*/
#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
#define HAL_USE_ICU FALSE
#endif
/**
* @brief Enables the MAC subsystem.
*/
#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
#define HAL_USE_MAC FALSE
#endif
/**
* @brief Enables the MMC_SPI subsystem.
*/
#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
#define HAL_USE_MMC_SPI FALSE
#endif
/**
* @brief Enables the PWM subsystem.
*/
#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
#define HAL_USE_PWM FALSE
#endif
/**
* @brief Enables the RTC subsystem.
*/
#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
#define HAL_USE_RTC FALSE
#endif
/**
* @brief Enables the SDC subsystem.
*/
#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
#define HAL_USE_SDC FALSE
#endif
/**
* @brief Enables the SERIAL subsystem.
*/
#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
#define HAL_USE_SERIAL FALSE
#endif
/**
* @brief Enables the SERIAL over USB subsystem.
*/
#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
#define HAL_USE_SERIAL_USB FALSE
#endif
/**
* @brief Enables the SPI subsystem.
*/
#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
#define HAL_USE_SPI FALSE
#endif
/**
* @brief Enables the UART subsystem.
*/
#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
#define HAL_USE_UART FALSE
#endif
/**
* @brief Enables the USB subsystem.
*/
#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
#define HAL_USE_USB TRUE
#endif
/**
* @brief Enables the WDG subsystem.
*/
#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
#define HAL_USE_WDG FALSE
#endif
/*===========================================================================*/
/* USB driver related settings. */
/*===========================================================================*/
/**
* @brief Enables synchronous APIs.
* @note Disabling this option saves both code and data space.
*/
#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
#define USB_USE_WAIT TRUE
#endif
#endif /* _HALCONF_H_ */
/** @} */

110
keyboards/chibios_test/teensy_lc_onekey/mcuconf.h
View file

@ -1,55 +1,55 @@
/*
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
#ifndef _MCUCONF_H_
#define _MCUCONF_H_
#define KL2x_MCUCONF
/*
* HAL driver system settings.
*/
#if 1
/* PEE mode - 48MHz system clock driven by (16 MHz) external crystal. */
#define KINETIS_MCG_MODE KINETIS_MCG_MODE_PEE
#define KINETIS_PLLCLK_FREQUENCY 96000000UL
#define KINETIS_SYSCLK_FREQUENCY 48000000UL
#endif
#if 0
/* crystal-less FEI mode - 48 MHz with internal 32.768 kHz crystal */
#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEI
#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */
#define KINETIS_MCG_FLL_DRS 1 /* 1464x FLL factor */
#define KINETIS_SYSCLK_FREQUENCY 47972352UL /* 32.768 kHz * 1464 (~48 MHz) */
#define KINETIS_CLKDIV1_OUTDIV1 1 /* do not divide system clock */
#endif
/*
* SERIAL driver system settings.
*/
#define KINETIS_SERIAL_USE_UART0 TRUE
/*
* USB driver settings
*/
#define KINETIS_USB_USE_USB0 TRUE
/* Need to redefine this, since the default is for K20x */
/* This is for Teensy LC; you should comment it out (or change to 5)
* for Teensy 3.x */
#define KINETIS_USB_USB0_IRQ_PRIORITY 2
#endif /* _MCUCONF_H_ */
/*
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
#ifndef _MCUCONF_H_
#define _MCUCONF_H_
#define KL2x_MCUCONF
/*
* HAL driver system settings.
*/
#if 1
/* PEE mode - 48MHz system clock driven by (16 MHz) external crystal. */
#define KINETIS_MCG_MODE KINETIS_MCG_MODE_PEE
#define KINETIS_PLLCLK_FREQUENCY 96000000UL
#define KINETIS_SYSCLK_FREQUENCY 48000000UL
#endif
#if 0
/* crystal-less FEI mode - 48 MHz with internal 32.768 kHz crystal */
#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEI
#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */
#define KINETIS_MCG_FLL_DRS 1 /* 1464x FLL factor */
#define KINETIS_SYSCLK_FREQUENCY 47972352UL /* 32.768 kHz * 1464 (~48 MHz) */
#define KINETIS_CLKDIV1_OUTDIV1 1 /* do not divide system clock */
#endif
/*
* SERIAL driver system settings.
*/
#define KINETIS_SERIAL_USE_UART0 TRUE
/*
* USB driver settings
*/
#define KINETIS_USB_USE_USB0 TRUE
/* Need to redefine this, since the default is for K20x */
/* This is for Teensy LC; you should comment it out (or change to 5)
* for Teensy 3.x */
#define KINETIS_USB_USB0_IRQ_PRIORITY 2
#endif /* _MCUCONF_H_ */

2
keyboards/gh60/Makefile
View file

@ -1,3 +1,3 @@
ifndef MAKEFILE_INCLUDED
include ../../Makefile
endif
endif

322
keyboards/gh60/config.h
View file

@ -1,161 +1,161 @@
/*
Copyright 2012 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef CONFIG_H
#define CONFIG_H
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x6060
#define DEVICE_VER 0x0001
#define MANUFACTURER geekhack
#define PRODUCT GH60
#define DESCRIPTION t.m.k. keyboard firmware for GH60
/* key matrix size */
#define MATRIX_ROWS 5
#define MATRIX_COLS 14
/*
* Keyboard Matrix Assignments
*
* Change this to how you wired your keyboard
* COLS: AVR pins used for columns, left to right
* ROWS: AVR pins used for rows, top to bottom
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/
#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
// Rev A
// #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B0, B5, B4, D7, D6, B3 }
// Rev B/C
#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3 }
#define UNUSED_PINS
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCING_DELAY 5
/* define if matrix has ghost (lacks anti-ghosting diodes) */
//#define MATRIX_HAS_GHOST
/* number of backlight levels */
#define BACKLIGHT_LEVELS 3
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/*
* Force NKRO
*
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
* makefile for this to work.)
*
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
* until the next keyboard reset.
*
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
* fully operational during normal computer usage.
*
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
* power-up.
*
*/
//#define FORCE_NKRO
/*
* Magic Key Options
*
* Magic keys are hotkey commands that allow control over firmware functions of
* the keyboard. They are best used in combination with the HID Listen program,
* found here: https://www.pjrc.com/teensy/hid_listen.html
*
* The options below allow the magic key functionality to be changed. This is
* useful if your keyboard/keypad is missing keys and you want magic key support.
*
*/
/* key combination for magic key command */
#define IS_COMMAND() ( \
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
)
/* control how magic key switches layers */
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
/* override magic key keymap */
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
//#define MAGIC_KEY_HELP1 H
//#define MAGIC_KEY_HELP2 SLASH
//#define MAGIC_KEY_DEBUG D
//#define MAGIC_KEY_DEBUG_MATRIX X
//#define MAGIC_KEY_DEBUG_KBD K
//#define MAGIC_KEY_DEBUG_MOUSE M
//#define MAGIC_KEY_VERSION V
//#define MAGIC_KEY_STATUS S
//#define MAGIC_KEY_CONSOLE C
//#define MAGIC_KEY_LAYER0_ALT1 ESC
//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
//#define MAGIC_KEY_LAYER0 0
//#define MAGIC_KEY_LAYER1 1
//#define MAGIC_KEY_LAYER2 2
//#define MAGIC_KEY_LAYER3 3
//#define MAGIC_KEY_LAYER4 4
//#define MAGIC_KEY_LAYER5 5
//#define MAGIC_KEY_LAYER6 6
//#define MAGIC_KEY_LAYER7 7
//#define MAGIC_KEY_LAYER8 8
//#define MAGIC_KEY_LAYER9 9
//#define MAGIC_KEY_BOOTLOADER PAUSE
//#define MAGIC_KEY_LOCK CAPS
//#define MAGIC_KEY_EEPROM E
//#define MAGIC_KEY_NKRO N
//#define MAGIC_KEY_SLEEP_LED Z
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
#endif
/*
Copyright 2012 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef CONFIG_H
#define CONFIG_H
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x6060
#define DEVICE_VER 0x0001
#define MANUFACTURER geekhack
#define PRODUCT GH60
#define DESCRIPTION t.m.k. keyboard firmware for GH60
/* key matrix size */
#define MATRIX_ROWS 5
#define MATRIX_COLS 14
/*
* Keyboard Matrix Assignments
*
* Change this to how you wired your keyboard
* COLS: AVR pins used for columns, left to right
* ROWS: AVR pins used for rows, top to bottom
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/
#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
// Rev A
// #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B0, B5, B4, D7, D6, B3 }
// Rev B/C
#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3 }
#define UNUSED_PINS
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCING_DELAY 5
/* define if matrix has ghost (lacks anti-ghosting diodes) */
//#define MATRIX_HAS_GHOST
/* number of backlight levels */
#define BACKLIGHT_LEVELS 3
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/*
* Force NKRO
*
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
* makefile for this to work.)
*
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
* until the next keyboard reset.
*
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
* fully operational during normal computer usage.
*
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
* power-up.
*
*/
//#define FORCE_NKRO
/*
* Magic Key Options
*
* Magic keys are hotkey commands that allow control over firmware functions of
* the keyboard. They are best used in combination with the HID Listen program,
* found here: https://www.pjrc.com/teensy/hid_listen.html
*
* The options below allow the magic key functionality to be changed. This is
* useful if your keyboard/keypad is missing keys and you want magic key support.
*
*/
/* key combination for magic key command */
#define IS_COMMAND() ( \
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
)
/* control how magic key switches layers */
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
/* override magic key keymap */
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
//#define MAGIC_KEY_HELP1 H
//#define MAGIC_KEY_HELP2 SLASH
//#define MAGIC_KEY_DEBUG D
//#define MAGIC_KEY_DEBUG_MATRIX X
//#define MAGIC_KEY_DEBUG_KBD K
//#define MAGIC_KEY_DEBUG_MOUSE M
//#define MAGIC_KEY_VERSION V
//#define MAGIC_KEY_STATUS S
//#define MAGIC_KEY_CONSOLE C
//#define MAGIC_KEY_LAYER0_ALT1 ESC
//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
//#define MAGIC_KEY_LAYER0 0
//#define MAGIC_KEY_LAYER1 1
//#define MAGIC_KEY_LAYER2 2
//#define MAGIC_KEY_LAYER3 3
//#define MAGIC_KEY_LAYER4 4
//#define MAGIC_KEY_LAYER5 5
//#define MAGIC_KEY_LAYER6 6
//#define MAGIC_KEY_LAYER7 7
//#define MAGIC_KEY_LAYER8 8
//#define MAGIC_KEY_LAYER9 9
//#define MAGIC_KEY_BOOTLOADER PAUSE
//#define MAGIC_KEY_LOCK CAPS
//#define MAGIC_KEY_EEPROM E
//#define MAGIC_KEY_NKRO N
//#define MAGIC_KEY_SLEEP_LED Z
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
#endif

50
keyboards/gh60/gh60.c
View file

@ -1,25 +1,25 @@
#include "gh60.h"
void led_set_kb(uint8_t usb_led) {
// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
gh60_caps_led_on();
} else {
gh60_caps_led_off();
}
// if (usb_led & (1<<USB_LED_NUM_LOCK)) {
// gh60_esc_led_on();
// } else {
// gh60_esc_led_off();
// }
// if (usb_led & (1<<USB_LED_SCROLL_LOCK)) {
// gh60_fn_led_on();
// } else {
// gh60_fn_led_off();
// }
led_set_user(usb_led);
}
#include "gh60.h"
void led_set_kb(uint8_t usb_led) {
// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
gh60_caps_led_on();
} else {
gh60_caps_led_off();
}
// if (usb_led & (1<<USB_LED_NUM_LOCK)) {
// gh60_esc_led_on();
// } else {
// gh60_esc_led_off();
// }
// if (usb_led & (1<<USB_LED_SCROLL_LOCK)) {
// gh60_fn_led_on();
// } else {
// gh60_fn_led_off();
// }
led_set_user(usb_led);
}

148
keyboards/gh60/gh60.h
View file

@ -1,74 +1,74 @@
#ifndef GH60_H
#define GH60_H
#include "quantum.h"
#include "led.h"
/* GH60 LEDs
* GPIO pads
* 0 F7 WASD LEDs
* 1 F6 ESC LED
* 2 F5 FN LED
* 3 F4 POKER Arrow LEDs
* B2 Capslock LED
* B0 not connected
*/
inline void gh60_caps_led_on(void) { DDRB |= (1<<2); PORTB &= ~(1<<2); }
inline void gh60_poker_leds_on(void) { DDRF |= (1<<4); PORTF &= ~(1<<4); }
inline void gh60_fn_led_on(void) { DDRF |= (1<<5); PORTF &= ~(1<<5); }
inline void gh60_esc_led_on(void) { DDRF |= (1<<6); PORTF &= ~(1<<6); }
inline void gh60_wasd_leds_on(void) { DDRF |= (1<<7); PORTF &= ~(1<<7); }
inline void gh60_caps_led_off(void) { DDRB &= ~(1<<2); PORTB &= ~(1<<2); }
inline void gh60_poker_leds_off(void) { DDRF &= ~(1<<4); PORTF &= ~(1<<4); }
inline void gh60_fn_led_off(void) { DDRF &= ~(1<<5); PORTF &= ~(1<<5); }
inline void gh60_esc_led_off(void) { DDRF &= ~(1<<6); PORTF &= ~(1<<6); }
inline void gh60_wasd_leds_off(void) { DDRF &= ~(1<<7); PORTF &= ~(1<<7); }
/* GH60 keymap definition macro
* K2C, K31 and K3C are extra keys for ISO
*/
#define KEYMAP( \
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \
K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \
K40, K41, K42, K45, K49, K4A, K4B, K4C, K4D \
) { \
{ KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D }, \
{ KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D }, \
{ KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D }, \
{ KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D }, \
{ KC_##K40, KC_##K41, KC_##K42, KC_NO, KC_NO, KC_##K45, KC_NO, KC_NO, KC_NO, KC_##K49, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D } \
}
/* ANSI valiant. No extra keys for ISO */
#define KEYMAP_ANSI( \
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \
K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, \
K40, K41, K42, K45, K4A, K4B, K4C, K4D \
) KEYMAP( \
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, NO, K2D, \
K30, NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, NO, K3D, \
K40, K41, K42, K45, NO, K4A, K4B, K4C, K4D \
)
#define KEYMAP_HHKB( \
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K49,\
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \
K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, K3C, \
K40, K41, K42, K45, K4A, K4B, K4C, K4D \
) KEYMAP( \
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, NO, K2D, \
K30, NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \
K40, K41, K42, K45, K49, K4A, K4B, K4C, K4D \
)
#endif
#ifndef GH60_H
#define GH60_H
#include "quantum.h"
#include "led.h"
/* GH60 LEDs
* GPIO pads
* 0 F7 WASD LEDs
* 1 F6 ESC LED
* 2 F5 FN LED
* 3 F4 POKER Arrow LEDs
* B2 Capslock LED
* B0 not connected
*/
inline void gh60_caps_led_on(void) { DDRB |= (1<<2); PORTB &= ~(1<<2); }
inline void gh60_poker_leds_on(void) { DDRF |= (1<<4); PORTF &= ~(1<<4); }
inline void gh60_fn_led_on(void) { DDRF |= (1<<5); PORTF &= ~(1<<5); }
inline void gh60_esc_led_on(void) { DDRF |= (1<<6); PORTF &= ~(1<<6); }
inline void gh60_wasd_leds_on(void) { DDRF |= (1<<7); PORTF &= ~(1<<7); }
inline void gh60_caps_led_off(void) { DDRB &= ~(1<<2); PORTB &= ~(1<<2); }
inline void gh60_poker_leds_off(void) { DDRF &= ~(1<<4); PORTF &= ~(1<<4); }
inline void gh60_fn_led_off(void) { DDRF &= ~(1<<5); PORTF &= ~(1<<5); }
inline void gh60_esc_led_off(void) { DDRF &= ~(1<<6); PORTF &= ~(1<<6); }
inline void gh60_wasd_leds_off(void) { DDRF &= ~(1<<7); PORTF &= ~(1<<7); }
/* GH60 keymap definition macro
* K2C, K31 and K3C are extra keys for ISO
*/
#define KEYMAP( \
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \
K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \
K40, K41, K42, K45, K49, K4A, K4B, K4C, K4D \
) { \
{ KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D }, \
{ KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D }, \
{ KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D }, \
{ KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D }, \
{ KC_##K40, KC_##K41, KC_##K42, KC_NO, KC_NO, KC_##K45, KC_NO, KC_NO, KC_NO, KC_##K49, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D } \
}
/* ANSI valiant. No extra keys for ISO */
#define KEYMAP_ANSI( \
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \
K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, \
K40, K41, K42, K45, K4A, K4B, K4C, K4D \
) KEYMAP( \
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, NO, K2D, \
K30, NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, NO, K3D, \
K40, K41, K42, K45, NO, K4A, K4B, K4C, K4D \
)
#define KEYMAP_HHKB( \
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K49,\
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \
K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, K3C, \
K40, K41, K42, K45, K4A, K4B, K4C, K4D \
) KEYMAP( \
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, NO, K2D, \
K30, NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \
K40, K41, K42, K45, K49, K4A, K4B, K4C, K4D \
)
#endif

224
keyboards/gh60/keymaps/robotmaxtron/Makefile
View file

@ -1,112 +1,112 @@
#----------------------------------------------------------------------------
# On command line:
#
# make all = Make software.
#
# make clean = Clean out built project files.
#
# make coff = Convert ELF to AVR COFF.
#
# make extcoff = Convert ELF to AVR Extended COFF.
#
# make program = Download the hex file to the device.
# Please customize your programmer settings(PROGRAM_CMD)
#
# make teensy = Download the hex file to the device, using teensy_loader_cli.
# (must have teensy_loader_cli installed).
#
# make dfu = Download the hex file to the device, using dfu-programmer (must
# have dfu-programmer installed).
#
# make flip = Download the hex file to the device, using Atmel FLIP (must
# have Atmel FLIP installed).
#
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
# (must have dfu-programmer installed).
#
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
# (must have Atmel FLIP installed).
#
# make debug = Start either simulavr or avarice as specified for debugging,
# with avr-gdb or avr-insight as the front end for debugging.
#
# make filename.s = Just compile filename.c into the assembler code only.
#
# make filename.i = Create a preprocessed source file for use in submitting
# bug reports to the GCC project.
#
# To rebuild project do "make clean" then "make all".
#----------------------------------------------------------------------------
# MCU name
#MCU = at90usb1287
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section Size in *bytes*
# Teensy halfKay 512
# Teensy++ halfKay 1024
# Atmel DFU loader 4096
# LUFA bootloader 4096
# USBaspLoader 2048
OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Build Options
# comment out to disable the options.
#
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
# CONSOLE_ENABLE ?= yes # Console for debug(+400)
# COMMAND_ENABLE ?= yes # Commands for debug and configuration
KEYBOARD_LOCK_ENABLE ?= yes # Allow locking of keyboard via magic key
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend
NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality
# MIDI_ENABLE ?= YES # MIDI controls
# UNICODE_ENABLE ?= YES # Unicode
# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE ?= yes # Enable RGB Underglow
ifndef QUANTUM_DIR
include ../../../../Makefile
endif
#----------------------------------------------------------------------------
# On command line:
#
# make all = Make software.
#
# make clean = Clean out built project files.
#
# make coff = Convert ELF to AVR COFF.
#
# make extcoff = Convert ELF to AVR Extended COFF.
#
# make program = Download the hex file to the device.
# Please customize your programmer settings(PROGRAM_CMD)
#
# make teensy = Download the hex file to the device, using teensy_loader_cli.
# (must have teensy_loader_cli installed).
#
# make dfu = Download the hex file to the device, using dfu-programmer (must
# have dfu-programmer installed).
#
# make flip = Download the hex file to the device, using Atmel FLIP (must
# have Atmel FLIP installed).
#
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
# (must have dfu-programmer installed).
#
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
# (must have Atmel FLIP installed).
#
# make debug = Start either simulavr or avarice as specified for debugging,
# with avr-gdb or avr-insight as the front end for debugging.
#
# make filename.s = Just compile filename.c into the assembler code only.
#
# make filename.i = Create a preprocessed source file for use in submitting
# bug reports to the GCC project.
#
# To rebuild project do "make clean" then "make all".
#----------------------------------------------------------------------------
# MCU name
#MCU = at90usb1287
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section Size in *bytes*
# Teensy halfKay 512
# Teensy++ halfKay 1024
# Atmel DFU loader 4096
# LUFA bootloader 4096
# USBaspLoader 2048
OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Build Options
# comment out to disable the options.
#
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
# CONSOLE_ENABLE ?= yes # Console for debug(+400)
# COMMAND_ENABLE ?= yes # Commands for debug and configuration
KEYBOARD_LOCK_ENABLE ?= yes # Allow locking of keyboard via magic key
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend
NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality
# MIDI_ENABLE ?= YES # MIDI controls
# UNICODE_ENABLE ?= YES # Unicode
# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE ?= yes # Enable RGB Underglow
ifndef QUANTUM_DIR
include ../../../../Makefile
endif

380
keyboards/gh60/keymaps/robotmaxtron/config.h
View file

@ -1,190 +1,190 @@
/*
Copyright 2012 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef CONFIG_H
#define CONFIG_H
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x6060
#define DEVICE_VER 0x0001
#define MANUFACTURER geekhack
#define PRODUCT GH60
#define DESCRIPTION t.m.k. keyboard firmware for GH60
/* key matrix size */
#define MATRIX_ROWS 5
#define MATRIX_COLS 14
/*
* Keyboard Matrix Assignments
*
* Change this to how you wired your keyboard
* COLS: AVR pins used for columns, left to right
* ROWS: AVR pins used for rows, top to bottom
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/
#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
// Rev A
// #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B0, B5, B4, D7, D6, B3 }
// Rev B/C
#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3 }
#define UNUSED_PINS
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCING_DELAY 5
/* define if matrix has ghost (lacks anti-ghosting diodes) */
//#define MATRIX_HAS_GHOST
/* number of backlight levels */
#define BACKLIGHT_LEVELS 3
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/*
* Force NKRO
*
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
* makefile for this to work.)
*
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
* until the next keyboard reset.
*
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
* fully operational during normal computer usage.
*
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
* power-up.
*
*/
//#define FORCE_NKRO
/*
* Magic Key Options
*
* Magic keys are hotkey commands that allow control over firmware functions of
* the keyboard. They are best used in combination with the HID Listen program,
* found here: https://www.pjrc.com/teensy/hid_listen.html
*
* The options below allow the magic key functionality to be changed. This is
* useful if your keyboard/keypad is missing keys and you want magic key support.
*
*/
/* key combination for magic key command */
#define IS_COMMAND() ( \
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
)
/* control how magic key switches layers */
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
/* override magic key keymap */
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
//#define MAGIC_KEY_HELP1 H
//#define MAGIC_KEY_HELP2 SLASH
//#define MAGIC_KEY_DEBUG D
//#define MAGIC_KEY_DEBUG_MATRIX X
//#define MAGIC_KEY_DEBUG_KBD K
//#define MAGIC_KEY_DEBUG_MOUSE M
//#define MAGIC_KEY_VERSION V
//#define MAGIC_KEY_STATUS S
//#define MAGIC_KEY_CONSOLE C
//#define MAGIC_KEY_LAYER0_ALT1 ESC
//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
//#define MAGIC_KEY_LAYER0 0
//#define MAGIC_KEY_LAYER1 1
//#define MAGIC_KEY_LAYER2 2
//#define MAGIC_KEY_LAYER3 3
//#define MAGIC_KEY_LAYER4 4
//#define MAGIC_KEY_LAYER5 5
//#define MAGIC_KEY_LAYER6 6
//#define MAGIC_KEY_LAYER7 7
//#define MAGIC_KEY_LAYER8 8
//#define MAGIC_KEY_LAYER9 9
//#define MAGIC_KEY_BOOTLOADER PAUSE
//#define MAGIC_KEY_LOCK CAPS
//#define MAGIC_KEY_EEPROM E
//#define MAGIC_KEY_NKRO N
//#define MAGIC_KEY_SLEEP_LED Z
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
/*
* RGB Underglow
* These settings are for the F4 by default:
*
*
* #define ws2812_PORTREG PORTF
* #define ws2812_DDRREG DDRF
* #define ws2812_pin PF4
* #define RGBLED_NUM 14 // Number of LEDs
* #define RGBLIGHT_HUE_STEP 10
* #define RGBLIGHT_SAT_STEP 17
* #define RGBLIGHT_VAL_STEP 17
*
* The firmware supports 5 different light effects, and the color (hue, saturation, brightness) can be customized in most effects.
* To control the underglow, you need to modify your keymap file to assign those functions to some keys/key combinations.
* For details, please check this keymap. keyboard/planck/keymaps/yang/keymap.c
*/
/* Deprecated code below
#define ws2812_PORTREG PORTF
#define ws2812_DDRREG DDRF
#define ws2812_pin PF4
*/
#define RGB_DI_PIN F4
#define RGBLIGHT_TIMER
#define RGBLED_NUM 8 // Number of LEDs
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
#endif
/*
Copyright 2012 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef CONFIG_H
#define CONFIG_H
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x6060
#define DEVICE_VER 0x0001
#define MANUFACTURER geekhack
#define PRODUCT GH60
#define DESCRIPTION t.m.k. keyboard firmware for GH60
/* key matrix size */
#define MATRIX_ROWS 5
#define MATRIX_COLS 14
/*
* Keyboard Matrix Assignments
*
* Change this to how you wired your keyboard
* COLS: AVR pins used for columns, left to right
* ROWS: AVR pins used for rows, top to bottom
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/
#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
// Rev A
// #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B0, B5, B4, D7, D6, B3 }
// Rev B/C
#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3 }
#define UNUSED_PINS
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCING_DELAY 5
/* define if matrix has ghost (lacks anti-ghosting diodes) */
//#define MATRIX_HAS_GHOST
/* number of backlight levels */
#define BACKLIGHT_LEVELS 3
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/*
* Force NKRO
*
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
* makefile for this to work.)
*
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
* until the next keyboard reset.
*
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
* fully operational during normal computer usage.
*
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
* power-up.
*
*/
//#define FORCE_NKRO
/*
* Magic Key Options
*
* Magic keys are hotkey commands that allow control over firmware functions of
* the keyboard. They are best used in combination with the HID Listen program,
* found here: https://www.pjrc.com/teensy/hid_listen.html
*
* The options below allow the magic key functionality to be changed. This is
* useful if your keyboard/keypad is missing keys and you want magic key support.
*
*/
/* key combination for magic key command */
#define IS_COMMAND() ( \
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
)
/* control how magic key switches layers */
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
/* override magic key keymap */
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
//#define MAGIC_KEY_HELP1 H
//#define MAGIC_KEY_HELP2 SLASH
//#define MAGIC_KEY_DEBUG D
//#define MAGIC_KEY_DEBUG_MATRIX X
//#define MAGIC_KEY_DEBUG_KBD K
//#define MAGIC_KEY_DEBUG_MOUSE M
//#define MAGIC_KEY_VERSION V
//#define MAGIC_KEY_STATUS S
//#define MAGIC_KEY_CONSOLE C
//#define MAGIC_KEY_LAYER0_ALT1 ESC
//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
//#define MAGIC_KEY_LAYER0 0
//#define MAGIC_KEY_LAYER1 1
//#define MAGIC_KEY_LAYER2 2
//#define MAGIC_KEY_LAYER3 3
//#define MAGIC_KEY_LAYER4 4
//#define MAGIC_KEY_LAYER5 5
//#define MAGIC_KEY_LAYER6 6
//#define MAGIC_KEY_LAYER7 7
//#define MAGIC_KEY_LAYER8 8
//#define MAGIC_KEY_LAYER9 9
//#define MAGIC_KEY_BOOTLOADER PAUSE
//#define MAGIC_KEY_LOCK CAPS
//#define MAGIC_KEY_EEPROM E
//#define MAGIC_KEY_NKRO N
//#define MAGIC_KEY_SLEEP_LED Z
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
/*
* RGB Underglow
* These settings are for the F4 by default:
*
*
* #define ws2812_PORTREG PORTF
* #define ws2812_DDRREG DDRF
* #define ws2812_pin PF4
* #define RGBLED_NUM 14 // Number of LEDs
* #define RGBLIGHT_HUE_STEP 10
* #define RGBLIGHT_SAT_STEP 17
* #define RGBLIGHT_VAL_STEP 17
*
* The firmware supports 5 different light effects, and the color (hue, saturation, brightness) can be customized in most effects.
* To control the underglow, you need to modify your keymap file to assign those functions to some keys/key combinations.
* For details, please check this keymap. keyboard/planck/keymaps/yang/keymap.c
*/
/* Deprecated code below
#define ws2812_PORTREG PORTF
#define ws2812_DDRREG DDRF
#define ws2812_pin PF4
*/
#define RGB_DI_PIN F4
#define RGBLIGHT_TIMER
#define RGBLED_NUM 8 // Number of LEDs
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
#endif

34
keyboards/gh60/pinout.txt
View file

@ -1,18 +1,18 @@
/* Column pin configuration
* col: 0 1 2 3 4 5 6 7 8 9 10 11 12 13
* pin: F0 F1 E6 C7 C6 B6 D4 B1 B7 B5 B4 D7 D6 B3 (Rev.C)
*/
/* Row pin configuration
* row: 0 1 2 3 4
* pin: D0 D1 D2 D3 D5
*/
GPIO pads
0 F7 WASD LEDs
1 F6 ESC LED
2 F5 FN LED
3 F4 POKER Arrow LEDs
B2 Capslock LED
/* Column pin configuration
* col: 0 1 2 3 4 5 6 7 8 9 10 11 12 13
* pin: F0 F1 E6 C7 C6 B6 D4 B1 B7 B5 B4 D7 D6 B3 (Rev.C)
*/
/* Row pin configuration
* row: 0 1 2 3 4
* pin: D0 D1 D2 D3 D5
*/
GPIO pads
0 F7 WASD LEDs
1 F6 ESC LED
2 F5 FN LED
3 F4 POKER Arrow LEDs
B2 Capslock LED
B0 not connected

124
keyboards/gh60/readme.md
View file

@ -1,62 +1,62 @@
## gh60 Rev C keyboard firmware
![gh60 Rev C PCB](gh60revc.jpg)
/* Column pin configuration
* col: 0 1 2 3 4 5 6 7 8 9 10 11 12 13
* pin: F0 F1 E6 C7 C6 B6 D4 B1 B7 B5 B4 D7 D6 B3 (Rev.C)
*/
/* Row pin configuration
* row: 0 1 2 3 4
* pin: D0 D1 D2 D3 D5
*/
GPIO pads
0 F7 WASD LEDs
1 F6 ESC LED
2 F5 FN LED
3 F4 POKER Arrow LEDs
B2 Capslock LED
B0 not connected
Functions to controls LED clusters
gh60_caps_led_on()
gh60_poker_leds_on()
gh60_fn_led_on()
gh60_esc_led_on()
gh60_wasd_leds_on()
gh60_caps_led_off()
gh60_poker_leds_off()
gh60_fn_led_off()
gh60_esc_led_off()
gh60_wasd_leds_off()
======================
## Quantum MK Firmware
For the full Quantum feature list, see [the parent readme.md](/readme.md).
## Building
Download or clone the whole firmware and navigate to the keyboards/gh60_rev_c folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file.
Depending on which keymap you would like to use, you will have to compile slightly differently.
### Default
To build with the default keymap, simply run `make default`.
### Other Keymaps
Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `<name>.c` in the keymaps folder, and see keymap document (you can find in top readme.md) and existent keymap files.
To build the firmware binary hex file with a keymap just do `make` with a keymap like this:
```
$ make [default|jack|<name>]
```
Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder.
## gh60 Rev C keyboard firmware
![gh60 Rev C PCB](gh60revc.jpg)
/* Column pin configuration
* col: 0 1 2 3 4 5 6 7 8 9 10 11 12 13
* pin: F0 F1 E6 C7 C6 B6 D4 B1 B7 B5 B4 D7 D6 B3 (Rev.C)
*/
/* Row pin configuration
* row: 0 1 2 3 4
* pin: D0 D1 D2 D3 D5
*/
GPIO pads
0 F7 WASD LEDs
1 F6 ESC LED
2 F5 FN LED
3 F4 POKER Arrow LEDs
B2 Capslock LED
B0 not connected
Functions to controls LED clusters
gh60_caps_led_on()
gh60_poker_leds_on()
gh60_fn_led_on()
gh60_esc_led_on()
gh60_wasd_leds_on()
gh60_caps_led_off()
gh60_poker_leds_off()
gh60_fn_led_off()
gh60_esc_led_off()
gh60_wasd_leds_off()
======================
## Quantum MK Firmware
For the full Quantum feature list, see [the parent readme.md](/readme.md).
## Building
Download or clone the whole firmware and navigate to the keyboards/gh60_rev_c folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file.
Depending on which keymap you would like to use, you will have to compile slightly differently.
### Default
To build with the default keymap, simply run `make default`.
### Other Keymaps
Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `<name>.c` in the keymaps folder, and see keymap document (you can find in top readme.md) and existent keymap files.
To build the firmware binary hex file with a keymap just do `make` with a keymap like this:
```
$ make [default|jack|<name>]
```
Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder.

1048
keyboards/infinity_chibios/chconf.h
View file

File diff suppressed because it is too large Load diff

706
keyboards/infinity_chibios/halconf.h
View file

@ -1,353 +1,353 @@
/*
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
/**
* @file templates/halconf.h
* @brief HAL configuration header.
* @details HAL configuration file, this file allows to enable or disable the
* various device drivers from your application. You may also use
* this file in order to override the device drivers default settings.
*
* @addtogroup HAL_CONF
* @{
*/
#ifndef _HALCONF_H_
#define _HALCONF_H_
#include "mcuconf.h"
/**
* @brief Enables the PAL subsystem.
*/
#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
#define HAL_USE_PAL TRUE
#endif
/**
* @brief Enables the ADC subsystem.
*/
#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
#define HAL_USE_ADC FALSE
#endif
/**
* @brief Enables the CAN subsystem.
*/
#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
#define HAL_USE_CAN FALSE
#endif
/**
* @brief Enables the DAC subsystem.
*/
#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
#define HAL_USE_DAC FALSE
#endif
/**
* @brief Enables the EXT subsystem.
*/
#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
#define HAL_USE_EXT FALSE
#endif
/**
* @brief Enables the GPT subsystem.
*/
#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
#define HAL_USE_GPT FALSE
#endif
/**
* @brief Enables the I2C subsystem.
*/
#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
#define HAL_USE_I2C FALSE
#endif
/**
* @brief Enables the I2S subsystem.
*/
#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
#define HAL_USE_I2S FALSE
#endif
/**
* @brief Enables the ICU subsystem.
*/
#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
#define HAL_USE_ICU FALSE
#endif
/**
* @brief Enables the MAC subsystem.
*/
#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
#define HAL_USE_MAC FALSE
#endif
/**
* @brief Enables the MMC_SPI subsystem.
*/
#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
#define HAL_USE_MMC_SPI FALSE
#endif
/**
* @brief Enables the PWM subsystem.
*/
#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
#define HAL_USE_PWM FALSE
#endif
/**
* @brief Enables the RTC subsystem.
*/
#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
#define HAL_USE_RTC FALSE
#endif
/**
* @brief Enables the SDC subsystem.
*/
#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
#define HAL_USE_SDC FALSE
#endif
/**
* @brief Enables the SERIAL subsystem.
*/
#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
#define HAL_USE_SERIAL FALSE
#endif
/**
* @brief Enables the SERIAL over USB subsystem.
*/
#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
#define HAL_USE_SERIAL_USB TRUE
#endif
/**
* @brief Enables the SPI subsystem.
*/
#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
#define HAL_USE_SPI FALSE
#endif
/**
* @brief Enables the UART subsystem.
*/
#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
#define HAL_USE_UART FALSE
#endif
/**
* @brief Enables the USB subsystem.
*/
#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
#define HAL_USE_USB TRUE
#endif
/**
* @brief Enables the WDG subsystem.
*/
#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
#define HAL_USE_WDG FALSE
#endif
/*===========================================================================*/
/* ADC driver related settings. */
/*===========================================================================*/
/**
* @brief Enables synchronous APIs.
* @note Disabling this option saves both code and data space.
*/
#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
#define ADC_USE_WAIT TRUE
#endif
/**
* @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
* @note Disabling this option saves both code and data space.
*/
#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
#define ADC_USE_MUTUAL_EXCLUSION TRUE
#endif
/*===========================================================================*/
/* CAN driver related settings. */
/*===========================================================================*/
/**
* @brief Sleep mode related APIs inclusion switch.
*/
#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
#define CAN_USE_SLEEP_MODE TRUE
#endif
/*===========================================================================*/
/* I2C driver related settings. */
/*===========================================================================*/
/**
* @brief Enables the mutual exclusion APIs on the I2C bus.
*/
#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
#define I2C_USE_MUTUAL_EXCLUSION TRUE
#endif
/*===========================================================================*/
/* MAC driver related settings. */
/*===========================================================================*/
/**
* @brief Enables an event sources for incoming packets.
*/
#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
#define MAC_USE_ZERO_COPY FALSE
#endif
/**
* @brief Enables an event sources for incoming packets.
*/
#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
#define MAC_USE_EVENTS TRUE
#endif
/*===========================================================================*/
/* MMC_SPI driver related settings. */
/*===========================================================================*/
/**
* @brief Delays insertions.
* @details If enabled this options inserts delays into the MMC waiting
* routines releasing some extra CPU time for the threads with
* lower priority, this may slow down the driver a bit however.
* This option is recommended also if the SPI driver does not
* use a DMA channel and heavily loads the CPU.
*/
#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
#define MMC_NICE_WAITING TRUE
#endif
/*===========================================================================*/
/* SDC driver related settings. */
/*===========================================================================*/
/**
* @brief Number of initialization attempts before rejecting the card.
* @note Attempts are performed at 10mS intervals.
*/
#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
#define SDC_INIT_RETRY 100
#endif
/**
* @brief Include support for MMC cards.
* @note MMC support is not yet implemented so this option must be kept
* at @p FALSE.
*/
#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
#define SDC_MMC_SUPPORT FALSE
#endif
/**
* @brief Delays insertions.
* @details If enabled this options inserts delays into the MMC waiting
* routines releasing some extra CPU time for the threads with
* lower priority, this may slow down the driver a bit however.
*/
#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
#define SDC_NICE_WAITING TRUE
#endif
/*===========================================================================*/
/* SERIAL driver related settings. */
/*===========================================================================*/
/**
* @brief Default bit rate.
* @details Configuration parameter, this is the baud rate selected for the
* default configuration.
*/
#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
#define SERIAL_DEFAULT_BITRATE 38400
#endif
/**
* @brief Serial buffers size.
* @details Configuration parameter, you can change the depth of the queue
* buffers depending on the requirements of your application.
* @note The default is 64 bytes for both the transmission and receive
* buffers.
*/
#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
#define SERIAL_BUFFERS_SIZE 16
#endif
/*===========================================================================*/
/* SERIAL_USB driver related setting. */
/*===========================================================================*/
/**
* @brief Serial over USB buffers size.
* @details Configuration parameter, the buffer size must be a multiple of
* the USB data endpoint maximum packet size.
* @note The default is 64 bytes for both the transmission and receive
* buffers.
*/
#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
#define SERIAL_USB_BUFFERS_SIZE 256
#endif
/*===========================================================================*/
/* SPI driver related settings. */
/*===========================================================================*/
/**
* @brief Enables synchronous APIs.
* @note Disabling this option saves both code and data space.
*/
#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
#define SPI_USE_WAIT TRUE
#endif
/**
* @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
* @note Disabling this option saves both code and data space.
*/
#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
#define SPI_USE_MUTUAL_EXCLUSION TRUE
#endif
/*===========================================================================*/
/* USB driver related settings. */
/*===========================================================================*/
/**
* @brief Enables synchronous APIs.
* @note Disabling this option saves both code and data space.
*/
#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
#define USB_USE_WAIT TRUE
#endif
#endif /* _HALCONF_H_ */
/** @} */
/*
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
/**
* @file templates/halconf.h
* @brief HAL configuration header.
* @details HAL configuration file, this file allows to enable or disable the
* various device drivers from your application. You may also use
* this file in order to override the device drivers default settings.
*
* @addtogroup HAL_CONF
* @{
*/
#ifndef _HALCONF_H_
#define _HALCONF_H_
#include "mcuconf.h"
/**
* @brief Enables the PAL subsystem.
*/
#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
#define HAL_USE_PAL TRUE
#endif
/**
* @brief Enables the ADC subsystem.
*/
#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
#define HAL_USE_ADC FALSE
#endif
/**
* @brief Enables the CAN subsystem.
*/
#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
#define HAL_USE_CAN FALSE
#endif
/**
* @brief Enables the DAC subsystem.
*/
#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
#define HAL_USE_DAC FALSE
#endif
/**
* @brief Enables the EXT subsystem.
*/
#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
#define HAL_USE_EXT FALSE
#endif
/**
* @brief Enables the GPT subsystem.
*/
#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
#define HAL_USE_GPT FALSE
#endif
/**
* @brief Enables the I2C subsystem.
*/
#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
#define HAL_USE_I2C FALSE
#endif
/**
* @brief Enables the I2S subsystem.
*/
#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
#define HAL_USE_I2S FALSE
#endif
/**
* @brief Enables the ICU subsystem.
*/
#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
#define HAL_USE_ICU FALSE
#endif
/**
* @brief Enables the MAC subsystem.
*/
#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
#define HAL_USE_MAC FALSE
#endif
/**
* @brief Enables the MMC_SPI subsystem.
*/
#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
#define HAL_USE_MMC_SPI FALSE
#endif
/**
* @brief Enables the PWM subsystem.
*/
#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
#define HAL_USE_PWM FALSE
#endif
/**
* @brief Enables the RTC subsystem.
*/
#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
#define HAL_USE_RTC FALSE
#endif
/**
* @brief Enables the SDC subsystem.
*/
#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
#define HAL_USE_SDC FALSE
#endif
/**
* @brief Enables the SERIAL subsystem.
*/
#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
#define HAL_USE_SERIAL FALSE
#endif
/**
* @brief Enables the SERIAL over USB subsystem.
*/
#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
#define HAL_USE_SERIAL_USB TRUE
#endif
/**
* @brief Enables the SPI subsystem.
*/
#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
#define HAL_USE_SPI FALSE
#endif
/**
* @brief Enables the UART subsystem.
*/
#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
#define HAL_USE_UART FALSE
#endif
/**
* @brief Enables the USB subsystem.
*/
#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
#define HAL_USE_USB TRUE
#endif
/**
* @brief Enables the WDG subsystem.
*/
#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
#define HAL_USE_WDG FALSE
#endif
/*===========================================================================*/
/* ADC driver related settings. */
/*===========================================================================*/
/**
* @brief Enables synchronous APIs.
* @note Disabling this option saves both code and data space.
*/
#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
#define ADC_USE_WAIT TRUE
#endif
/**
* @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
* @note Disabling this option saves both code and data space.
*/
#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
#define ADC_USE_MUTUAL_EXCLUSION TRUE
#endif
/*===========================================================================*/
/* CAN driver related settings. */
/*===========================================================================*/
/**
* @brief Sleep mode related APIs inclusion switch.
*/
#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
#define CAN_USE_SLEEP_MODE TRUE
#endif
/*===========================================================================*/
/* I2C driver related settings. */
/*===========================================================================*/
/**
* @brief Enables the mutual exclusion APIs on the I2C bus.
*/
#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
#define I2C_USE_MUTUAL_EXCLUSION TRUE
#endif
/*===========================================================================*/
/* MAC driver related settings. */
/*===========================================================================*/
/**
* @brief Enables an event sources for incoming packets.
*/
#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
#define MAC_USE_ZERO_COPY FALSE
#endif
/**
* @brief Enables an event sources for incoming packets.
*/
#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
#define MAC_USE_EVENTS TRUE
#endif
/*===========================================================================*/
/* MMC_SPI driver related settings. */
/*===========================================================================*/
/**
* @brief Delays insertions.
* @details If enabled this options inserts delays into the MMC waiting
* routines releasing some extra CPU time for the threads with
* lower priority, this may slow down the driver a bit however.
* This option is recommended also if the SPI driver does not
* use a DMA channel and heavily loads the CPU.
*/
#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
#define MMC_NICE_WAITING TRUE
#endif
/*===========================================================================*/
/* SDC driver related settings. */
/*===========================================================================*/
/**
* @brief Number of initialization attempts before rejecting the card.
* @note Attempts are performed at 10mS intervals.
*/
#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
#define SDC_INIT_RETRY 100
#endif
/**
* @brief Include support for MMC cards.
* @note MMC support is not yet implemented so this option must be kept
* at @p FALSE.
*/
#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
#define SDC_MMC_SUPPORT FALSE
#endif
/**
* @brief Delays insertions.
* @details If enabled this options inserts delays into the MMC waiting
* routines releasing some extra CPU time for the threads with
* lower priority, this may slow down the driver a bit however.
*/
#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
#define SDC_NICE_WAITING TRUE
#endif
/*===========================================================================*/
/* SERIAL driver related settings. */
/*===========================================================================*/
/**
* @brief Default bit rate.
* @details Configuration parameter, this is the baud rate selected for the
* default configuration.
*/
#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
#define SERIAL_DEFAULT_BITRATE 38400
#endif
/**
* @brief Serial buffers size.
* @details Configuration parameter, you can change the depth of the queue
* buffers depending on the requirements of your application.
* @note The default is 64 bytes for both the transmission and receive
* buffers.
*/
#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
#define SERIAL_BUFFERS_SIZE 16
#endif
/*===========================================================================*/
/* SERIAL_USB driver related setting. */
/*===========================================================================*/
/**
* @brief Serial over USB buffers size.
* @details Configuration parameter, the buffer size must be a multiple of
* the USB data endpoint maximum packet size.
* @note The default is 64 bytes for both the transmission and receive
* buffers.
*/
#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
#define SERIAL_USB_BUFFERS_SIZE 256
#endif
/*===========================================================================*/
/* SPI driver related settings. */
/*===========================================================================*/
/**
* @brief Enables synchronous APIs.
* @note Disabling this option saves both code and data space.
*/
#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
#define SPI_USE_WAIT TRUE
#endif
/**
* @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
* @note Disabling this option saves both code and data space.
*/
#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
#define SPI_USE_MUTUAL_EXCLUSION TRUE
#endif
/*===========================================================================*/
/* USB driver related settings. */
/*===========================================================================*/
/**
* @brief Enables synchronous APIs.
* @note Disabling this option saves both code and data space.
*/
#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
#define USB_USE_WAIT TRUE
#endif
#endif /* _HALCONF_H_ */
/** @} */

110
keyboards/infinity_chibios/mcuconf.h
View file

@ -1,55 +1,55 @@
/*
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
#ifndef _MCUCONF_H_
#define _MCUCONF_H_
#define K20x_MCUCONF
/*
* HAL driver system settings.
*/
/* Select the MCU clocking mode below by enabling the appropriate block. */
#define KINETIS_NO_INIT FALSE
/* FEI mode - 48 MHz with internal 32.768 kHz crystal */
#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEI
#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */
#define KINETIS_MCG_FLL_DRS 1 /* 1464x FLL factor */
#define KINETIS_SYSCLK_FREQUENCY 47972352UL /* 32.768 kHz * 1464 (~48 MHz) */
#define KINETIS_CLKDIV1_OUTDIV1 1
#define KINETIS_CLKDIV1_OUTDIV2 1
#define KINETIS_CLKDIV1_OUTDIV4 2
#define KINETIS_BUSCLK_FREQUENCY KINETIS_SYSCLK_FREQUENCY
#define KINETIS_FLASHCLK_FREQUENCY KINETIS_SYSCLK_FREQUENCY/2
/*
* SERIAL driver system settings.
*/
#define KINETIS_SERIAL_USE_UART0 TRUE
/*
* USB driver settings
*/
#define KINETIS_USB_USE_USB0 TRUE
/* Need to redefine this, since the default is for K20x */
/* This is for Teensy LC; you should comment it out (or change to 5)
* for Teensy 3.x */
#define KINETIS_USB_USB0_IRQ_PRIORITY 2
#endif /* _MCUCONF_H_ */
/*
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
#ifndef _MCUCONF_H_
#define _MCUCONF_H_
#define K20x_MCUCONF
/*
* HAL driver system settings.
*/
/* Select the MCU clocking mode below by enabling the appropriate block. */
#define KINETIS_NO_INIT FALSE
/* FEI mode - 48 MHz with internal 32.768 kHz crystal */
#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEI
#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */
#define KINETIS_MCG_FLL_DRS 1 /* 1464x FLL factor */
#define KINETIS_SYSCLK_FREQUENCY 47972352UL /* 32.768 kHz * 1464 (~48 MHz) */
#define KINETIS_CLKDIV1_OUTDIV1 1
#define KINETIS_CLKDIV1_OUTDIV2 1
#define KINETIS_CLKDIV1_OUTDIV4 2
#define KINETIS_BUSCLK_FREQUENCY KINETIS_SYSCLK_FREQUENCY
#define KINETIS_FLASHCLK_FREQUENCY KINETIS_SYSCLK_FREQUENCY/2
/*
* SERIAL driver system settings.
*/
#define KINETIS_SERIAL_USE_UART0 TRUE
/*
* USB driver settings
*/
#define KINETIS_USB_USE_USB0 TRUE
/* Need to redefine this, since the default is for K20x */
/* This is for Teensy LC; you should comment it out (or change to 5)
* for Teensy 3.x */
#define KINETIS_USB_USB0_IRQ_PRIORITY 2
#endif /* _MCUCONF_H_ */

1000
tmk_core/common/avr/xprintf.S
View file

File diff suppressed because it is too large Load diff

222
tmk_core/common/avr/xprintf.h
View file

@ -1,111 +1,111 @@
/*---------------------------------------------------------------------------
Extended itoa, puts and printf (C)ChaN, 2011
-----------------------------------------------------------------------------*/
#ifndef XPRINTF_H
#define XPRINTF_H
#include <inttypes.h>
#include <avr/pgmspace.h>
#ifdef __cplusplus
extern "C" {
#endif
extern void (*xfunc_out)(uint8_t);
#define xdev_out(func) xfunc_out = (void(*)(uint8_t))(func)
/* This is a pointer to user defined output function. It must be initialized
before using this modle.
*/
void xputc(char chr);
/* This is a stub function to forward outputs to user defined output function.
All outputs from this module are output via this function.
*/
/*-----------------------------------------------------------------------------*/
void xputs(const char *string_p);
/* The string placed in the ROM is forwarded to xputc() directly.
*/
/*-----------------------------------------------------------------------------*/
void xitoa(long value, char radix, char width);
/* Extended itoa().
value radix width output
100 10 6 " 100"
100 10 -6 "000100"
100 10 0 "100"
4294967295 10 0 "4294967295"
4294967295 -10 0 "-1"
655360 16 -8 "000A0000"
1024 16 0 "400"
0x55 2 -8 "01010101"
*/
/*-----------------------------------------------------------------------------*/
#define xprintf(format, ...) __xprintf(PSTR(format), ##__VA_ARGS__)
#define xsprintf(str, format, ...) __xsprintf(str, PSTR(format), ##__VA_ARGS__)
#define xfprintf(func, format, ...) __xfprintf(func, PSTR(format), ##__VA_ARGS__)
void __xprintf(const char *format_p, ...); /* Send formatted string to the registered device */
void __xsprintf(char*, const char *format_p, ...); /* Put formatted string to the memory */
void __xfprintf(void(*func)(uint8_t), const char *format_p, ...); /* Send formatted string to the specified device */
/* Format string is placed in the ROM. The format flags is similar to printf().
%[flag][width][size]type
flag
A '0' means filled with '0' when output is shorter than width.
' ' is used in default. This is effective only numeral type.
width
Minimum width in decimal number. This is effective only numeral type.
Default width is zero.
size
A 'l' means the argument is long(32bit). Default is short(16bit).
This is effective only numeral type.
type
'c' : Character, argument is the value
's' : String placed on the RAM, argument is the pointer
'S' : String placed on the ROM, argument is the pointer
'd' : Signed decimal, argument is the value
'u' : Unsigned decimal, argument is the value
'X' : Hexdecimal, argument is the value
'b' : Binary, argument is the value
'%' : '%'
*/
/*-----------------------------------------------------------------------------*/
char xatoi(char **str, long *ret);
/* Get value of the numeral string.
str
Pointer to pointer to source string
"0b11001010" binary
"0377" octal
"0xff800" hexdecimal
"1250000" decimal
"-25000" decimal
ret
Pointer to return value
*/
#ifdef __cplusplus
}
#endif
#endif
/*---------------------------------------------------------------------------
Extended itoa, puts and printf (C)ChaN, 2011
-----------------------------------------------------------------------------*/
#ifndef XPRINTF_H
#define XPRINTF_H
#include <inttypes.h>
#include <avr/pgmspace.h>
#ifdef __cplusplus
extern "C" {
#endif
extern void (*xfunc_out)(uint8_t);
#define xdev_out(func) xfunc_out = (void(*)(uint8_t))(func)
/* This is a pointer to user defined output function. It must be initialized
before using this modle.
*/
void xputc(char chr);
/* This is a stub function to forward outputs to user defined output function.
All outputs from this module are output via this function.
*/
/*-----------------------------------------------------------------------------*/
void xputs(const char *string_p);
/* The string placed in the ROM is forwarded to xputc() directly.
*/
/*-----------------------------------------------------------------------------*/
void xitoa(long value, char radix, char width);
/* Extended itoa().
value radix width output
100 10 6 " 100"
100 10 -6 "000100"
100 10 0 "100"
4294967295 10 0 "4294967295"
4294967295 -10 0 "-1"
655360 16 -8 "000A0000"
1024 16 0 "400"
0x55 2 -8 "01010101"
*/
/*-----------------------------------------------------------------------------*/
#define xprintf(format, ...) __xprintf(PSTR(format), ##__VA_ARGS__)
#define xsprintf(str, format, ...) __xsprintf(str, PSTR(format), ##__VA_ARGS__)
#define xfprintf(func, format, ...) __xfprintf(func, PSTR(format), ##__VA_ARGS__)
void __xprintf(const char *format_p, ...); /* Send formatted string to the registered device */
void __xsprintf(char*, const char *format_p, ...); /* Put formatted string to the memory */
void __xfprintf(void(*func)(uint8_t), const char *format_p, ...); /* Send formatted string to the specified device */
/* Format string is placed in the ROM. The format flags is similar to printf().
%[flag][width][size]type
flag
A '0' means filled with '0' when output is shorter than width.
' ' is used in default. This is effective only numeral type.
width
Minimum width in decimal number. This is effective only numeral type.
Default width is zero.
size
A 'l' means the argument is long(32bit). Default is short(16bit).
This is effective only numeral type.
type
'c' : Character, argument is the value
's' : String placed on the RAM, argument is the pointer
'S' : String placed on the ROM, argument is the pointer
'd' : Signed decimal, argument is the value
'u' : Unsigned decimal, argument is the value
'X' : Hexdecimal, argument is the value
'b' : Binary, argument is the value
'%' : '%'
*/
/*-----------------------------------------------------------------------------*/
char xatoi(char **str, long *ret);
/* Get value of the numeral string.
str
Pointer to pointer to source string
"0b11001010" binary
"0377" octal
"0xff800" hexdecimal
"1250000" decimal
"-25000" decimal
ret
Pointer to return value
*/
#ifdef __cplusplus
}
#endif
#endif

312
tmk_core/protocol/iwrap/suart.S
View file

@ -1,156 +1,156 @@
;---------------------------------------------------------------------------;
; Software implemented UART module ;
; (C)ChaN, 2005 (http://elm-chan.org/) ;
;---------------------------------------------------------------------------;
; Bit rate settings:
;
; 1MHz 2MHz 4MHz 6MHz 8MHz 10MHz 12MHz 16MHz 20MHz
; 2.4kbps 138 - - - - - - - -
; 4.8kbps 68 138 - - - - - - -
; 9.6kbps 33 68 138 208 - - - - -
; 19.2kbps - 33 68 102 138 173 208 - -
; 38.4kbps - - 33 50 68 85 102 138 172
; 57.6kbps - - 21 33 44 56 68 91 114
; 115.2kbps - - - - 21 27 33 44 56
.nolist
#include <avr/io.h>
.list
#define BPS 102 /* Bit delay. (see above table) */
#define BIDIR 0 /* 0:Separated Tx/Rx, 1:Shared Tx/Rx */
#define OUT_1 sbi _SFR_IO_ADDR(SUART_OUT_PORT), SUART_OUT_BIT /* Output 1 */
#define OUT_0 cbi _SFR_IO_ADDR(SUART_OUT_PORT), SUART_OUT_BIT /* Output 0 */
#define SKIP_IN_1 sbis _SFR_IO_ADDR(SUART_IN_PIN), SUART_IN_BIT /* Skip if 1 */
#define SKIP_IN_0 sbic _SFR_IO_ADDR(SUART_IN_PIN), SUART_IN_BIT /* Skip if 0 */
#ifdef SPM_PAGESIZE
.macro _LPMI reg
lpm \reg, Z+
.endm
.macro _MOVW dh,dl, sh,sl
movw \dl, \sl
.endm
#else
.macro _LPMI reg
lpm
mov \reg, r0
adiw ZL, 1
.endm
.macro _MOVW dh,dl, sh,sl
mov \dl, \sl
mov \dh, \sh
.endm
#endif
;---------------------------------------------------------------------------;
; Transmit a byte in serial format of N81
;
;Prototype: void xmit (uint8_t data);
;Size: 16 words
.global xmit
.func xmit
xmit:
#if BIDIR
ldi r23, BPS-1 ;Pre-idle time for bidirectional data line
5: dec r23 ;
brne 5b ;/
#endif
in r0, _SFR_IO_ADDR(SREG) ;Save flags
com r24 ;C = start bit
ldi r25, 10 ;Bit counter
cli ;Start critical section
1: ldi r23, BPS-1 ;----- Bit transferring loop
2: dec r23 ;Wait for a bit time
brne 2b ;/
brcs 3f ;MISO = bit to be sent
OUT_1 ;
3: brcc 4f ;
OUT_0 ;/
4: lsr r24 ;Get next bit into C
dec r25 ;All bits sent?
brne 1b ; no, coutinue
out _SFR_IO_ADDR(SREG), r0 ;End of critical section
ret
.endfunc
;---------------------------------------------------------------------------;
; Receive a byte
;
;Prototype: uint8_t rcvr (void);
;Size: 19 words
.global rcvr
.func rcvr
rcvr:
in r0, _SFR_IO_ADDR(SREG) ;Save flags
ldi r24, 0x80 ;Receiving shift reg
cli ;Start critical section
1: SKIP_IN_1 ;Wait for idle
rjmp 1b
2: SKIP_IN_0 ;Wait for start bit
rjmp 2b
ldi r25, BPS/2 ;Wait for half bit time
3: dec r25
brne 3b
4: ldi r25, BPS ;----- Bit receiving loop
5: dec r25 ;Wait for a bit time
brne 5b ;/
lsr r24 ;Next bit
SKIP_IN_0 ;Get a data bit into r24.7
ori r24, 0x80
brcc 4b ;All bits received? no, continue
out _SFR_IO_ADDR(SREG), r0 ;End of critical section
ret
.endfunc
; Not wait for start bit. This should be called after detecting start bit.
.global recv
.func recv
recv:
in r0, _SFR_IO_ADDR(SREG) ;Save flags
ldi r24, 0x80 ;Receiving shift reg
cli ;Start critical section
;1: SKIP_IN_1 ;Wait for idle
; rjmp 1b
;2: SKIP_IN_0 ;Wait for start bit
; rjmp 2b
ldi r25, BPS/2 ;Wait for half bit time
3: dec r25
brne 3b
4: ldi r25, BPS ;----- Bit receiving loop
5: dec r25 ;Wait for a bit time
brne 5b ;/
lsr r24 ;Next bit
SKIP_IN_0 ;Get a data bit into r24.7
ori r24, 0x80
brcc 4b ;All bits received? no, continue
ldi r25, BPS/2 ;Wait for half bit time
6: dec r25
brne 6b
7: SKIP_IN_1 ;Wait for stop bit
rjmp 7b
out _SFR_IO_ADDR(SREG), r0 ;End of critical section
ret
.endfunc
;---------------------------------------------------------------------------;
; Software implemented UART module ;
; (C)ChaN, 2005 (http://elm-chan.org/) ;
;---------------------------------------------------------------------------;
; Bit rate settings:
;
; 1MHz 2MHz 4MHz 6MHz 8MHz 10MHz 12MHz 16MHz 20MHz
; 2.4kbps 138 - - - - - - - -
; 4.8kbps 68 138 - - - - - - -
; 9.6kbps 33 68 138 208 - - - - -
; 19.2kbps - 33 68 102 138 173 208 - -
; 38.4kbps - - 33 50 68 85 102 138 172
; 57.6kbps - - 21 33 44 56 68 91 114
; 115.2kbps - - - - 21 27 33 44 56
.nolist
#include <avr/io.h>
.list
#define BPS 102 /* Bit delay. (see above table) */
#define BIDIR 0 /* 0:Separated Tx/Rx, 1:Shared Tx/Rx */
#define OUT_1 sbi _SFR_IO_ADDR(SUART_OUT_PORT), SUART_OUT_BIT /* Output 1 */
#define OUT_0 cbi _SFR_IO_ADDR(SUART_OUT_PORT), SUART_OUT_BIT /* Output 0 */
#define SKIP_IN_1 sbis _SFR_IO_ADDR(SUART_IN_PIN), SUART_IN_BIT /* Skip if 1 */
#define SKIP_IN_0 sbic _SFR_IO_ADDR(SUART_IN_PIN), SUART_IN_BIT /* Skip if 0 */
#ifdef SPM_PAGESIZE
.macro _LPMI reg
lpm \reg, Z+
.endm
.macro _MOVW dh,dl, sh,sl
movw \dl, \sl
.endm
#else
.macro _LPMI reg
lpm
mov \reg, r0
adiw ZL, 1
.endm
.macro _MOVW dh,dl, sh,sl
mov \dl, \sl
mov \dh, \sh
.endm
#endif
;---------------------------------------------------------------------------;
; Transmit a byte in serial format of N81
;
;Prototype: void xmit (uint8_t data);
;Size: 16 words
.global xmit
.func xmit
xmit:
#if BIDIR
ldi r23, BPS-1 ;Pre-idle time for bidirectional data line
5: dec r23 ;
brne 5b ;/
#endif
in r0, _SFR_IO_ADDR(SREG) ;Save flags
com r24 ;C = start bit
ldi r25, 10 ;Bit counter
cli ;Start critical section
1: ldi r23, BPS-1 ;----- Bit transferring loop
2: dec r23 ;Wait for a bit time
brne 2b ;/
brcs 3f ;MISO = bit to be sent
OUT_1 ;
3: brcc 4f ;
OUT_0 ;/
4: lsr r24 ;Get next bit into C
dec r25 ;All bits sent?
brne 1b ; no, coutinue
out _SFR_IO_ADDR(SREG), r0 ;End of critical section
ret
.endfunc
;---------------------------------------------------------------------------;
; Receive a byte
;
;Prototype: uint8_t rcvr (void);
;Size: 19 words
.global rcvr
.func rcvr
rcvr:
in r0, _SFR_IO_ADDR(SREG) ;Save flags
ldi r24, 0x80 ;Receiving shift reg
cli ;Start critical section
1: SKIP_IN_1 ;Wait for idle
rjmp 1b
2: SKIP_IN_0 ;Wait for start bit
rjmp 2b
ldi r25, BPS/2 ;Wait for half bit time
3: dec r25
brne 3b
4: ldi r25, BPS ;----- Bit receiving loop
5: dec r25 ;Wait for a bit time
brne 5b ;/
lsr r24 ;Next bit
SKIP_IN_0 ;Get a data bit into r24.7
ori r24, 0x80
brcc 4b ;All bits received? no, continue
out _SFR_IO_ADDR(SREG), r0 ;End of critical section
ret
.endfunc
; Not wait for start bit. This should be called after detecting start bit.
.global recv
.func recv
recv:
in r0, _SFR_IO_ADDR(SREG) ;Save flags
ldi r24, 0x80 ;Receiving shift reg
cli ;Start critical section
;1: SKIP_IN_1 ;Wait for idle
; rjmp 1b
;2: SKIP_IN_0 ;Wait for start bit
; rjmp 2b
ldi r25, BPS/2 ;Wait for half bit time
3: dec r25
brne 3b
4: ldi r25, BPS ;----- Bit receiving loop
5: dec r25 ;Wait for a bit time
brne 5b ;/
lsr r24 ;Next bit
SKIP_IN_0 ;Get a data bit into r24.7
ori r24, 0x80
brcc 4b ;All bits received? no, continue
ldi r25, BPS/2 ;Wait for half bit time
6: dec r25
brne 6b
7: SKIP_IN_1 ;Wait for stop bit
rjmp 7b
out _SFR_IO_ADDR(SREG), r0 ;End of critical section
ret
.endfunc

16
tmk_core/protocol/iwrap/suart.h
View file

@ -1,8 +1,8 @@
#ifndef SUART
#define SUART
void xmit(uint8_t);
uint8_t rcvr(void);
uint8_t recv(void);
#endif /* SUART */
#ifndef SUART
#define SUART
void xmit(uint8_t);
uint8_t rcvr(void);
uint8_t recv(void);
#endif /* SUART */

318
tmk_core/protocol/iwrap/wd.h
View file

@ -1,159 +1,159 @@
/* This is from http://www.mtcnet.net/~henryvm/wdt/ */
#ifndef _AVR_WD_H_
#define _AVR_WD_H_
#include <avr/io.h>
/*
Copyright (c) 2009, Curt Van Maanen
Permission to use, copy, modify, and/or distribute this software for any
purpose with or without fee is hereby granted, provided that the above
copyright notice and this permission notice appear in all copies.
THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
include usage-
#include "wd.h" //if in same directory as project
#include <avr/wd.h> //if wd.h is in avr directory
set watchdog modes and prescale
usage-
WD_SET(mode,[timeout]); //prescale always set
modes-
WD_OFF disabled
WD_RST normal reset mode
WD_IRQ interrupt only mode (if supported)
WD_RST_IRQ interrupt+reset mode (if supported)
timeout-
WDTO_15MS default if no timeout provided
WDTO_30MS
WDTO_60MS
WDTO_120MS
WDTO_250MS
WDTO_500MS
WDTO_1S
WDTO_2S
WDTO_4S (if supported)
WDTO_8S (if supported)
examples-
WD_SET(WD_RST,WDTO_1S); //reset mode, 1s timeout
WD_SET(WD_OFF); //watchdog disabled (if not fused on)
WD_SET(WD_RST); //reset mode, 15ms (default timeout)
WD_SET(WD_IRQ,WDTO_120MS); //interrupt only mode, 120ms timeout
WD_SET(WD_RST_IRQ,WDTO_2S); //interrupt+reset mode, 2S timeout
for enhanced watchdogs, if the watchdog is not being used WDRF should be
cleared on every power up or reset, along with disabling the watchdog-
WD_DISABLE(); //clear WDRF, then turn off watchdog
*/
//reset registers to the same name (MCUCSR)
#if !defined(MCUCSR)
#define MCUCSR MCUSR
#endif
//watchdog registers to the same name (WDTCSR)
#if !defined(WDTCSR)
#define WDTCSR WDTCR
#endif
//if enhanced watchdog, define irq values, create disable macro
#if defined(WDIF)
#define WD_IRQ 0xC0
#define WD_RST_IRQ 0xC8
#define WD_DISABLE() do{ \
MCUCSR &= ~(1<<WDRF); \
WD_SET(WD_OFF); \
}while(0)
#endif
//all watchdogs
#define WD_RST 8
#define WD_OFF 0
//prescale values
#define WDTO_15MS 0
#define WDTO_30MS 1
#define WDTO_60MS 2
#define WDTO_120MS 3
#define WDTO_250MS 4
#define WDTO_500MS 5
#define WDTO_1S 6
#define WDTO_2S 7
//prescale values for avrs with WDP3
#if defined(WDP3)
#define WDTO_4S 0x20
#define WDTO_8S 0x21
#endif
//watchdog reset
#define WDR() __asm__ __volatile__("wdr")
//avr reset using watchdog
#define WD_AVR_RESET() do{ \
__asm__ __volatile__("cli"); \
WD_SET_UNSAFE(WD_RST); \
while(1); \
}while(0)
/*set the watchdog-
1. save SREG
2. turn off irq's
3. reset watchdog timer
4. enable watchdog change
5. write watchdog value
6. restore SREG (restoring irq status)
*/
#define WD_SET(val,...) \
__asm__ __volatile__( \
"in __tmp_reg__,__SREG__" "\n\t" \
"cli" "\n\t" \
"wdr" "\n\t" \
"sts %[wdreg],%[wden]" "\n\t" \
"sts %[wdreg],%[wdval]" "\n\t" \
"out __SREG__,__tmp_reg__" "\n\t" \
: \
: [wdreg] "M" (&WDTCSR), \
[wden] "r" ((uint8_t)(0x18)), \
[wdval] "r" ((uint8_t)(val|(__VA_ARGS__+0))) \
: "r0" \
)
/*set the watchdog when I bit in SREG known to be clear-
1. reset watchdog timer
2. enable watchdog change
5. write watchdog value
*/
#define WD_SET_UNSAFE(val,...) \
__asm__ __volatile__( \
"wdr" "\n\t" \
"sts %[wdreg],%[wden]" "\n\t" \
"sts %[wdreg],%[wdval]" "\n\t" \
: \
: [wdreg] "M" (&WDTCSR), \
[wden] "r" ((uint8_t)(0x18)), \
[wdval] "r" ((uint8_t)(val|(__VA_ARGS__+0))) \
)
//for compatibility with avr/wdt.h
#define wdt_enable(val) WD_SET(WD_RST,val)
#define wdt_disable() WD_SET(WD_OFF)
#endif /* _AVR_WD_H_ */
/* This is from http://www.mtcnet.net/~henryvm/wdt/ */
#ifndef _AVR_WD_H_
#define _AVR_WD_H_
#include <avr/io.h>
/*
Copyright (c) 2009, Curt Van Maanen
Permission to use, copy, modify, and/or distribute this software for any
purpose with or without fee is hereby granted, provided that the above
copyright notice and this permission notice appear in all copies.
THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
include usage-
#include "wd.h" //if in same directory as project
#include <avr/wd.h> //if wd.h is in avr directory
set watchdog modes and prescale
usage-
WD_SET(mode,[timeout]); //prescale always set
modes-
WD_OFF disabled
WD_RST normal reset mode
WD_IRQ interrupt only mode (if supported)
WD_RST_IRQ interrupt+reset mode (if supported)
timeout-
WDTO_15MS default if no timeout provided
WDTO_30MS
WDTO_60MS
WDTO_120MS
WDTO_250MS
WDTO_500MS
WDTO_1S
WDTO_2S
WDTO_4S (if supported)
WDTO_8S (if supported)
examples-
WD_SET(WD_RST,WDTO_1S); //reset mode, 1s timeout
WD_SET(WD_OFF); //watchdog disabled (if not fused on)
WD_SET(WD_RST); //reset mode, 15ms (default timeout)
WD_SET(WD_IRQ,WDTO_120MS); //interrupt only mode, 120ms timeout
WD_SET(WD_RST_IRQ,WDTO_2S); //interrupt+reset mode, 2S timeout
for enhanced watchdogs, if the watchdog is not being used WDRF should be
cleared on every power up or reset, along with disabling the watchdog-
WD_DISABLE(); //clear WDRF, then turn off watchdog
*/
//reset registers to the same name (MCUCSR)
#if !defined(MCUCSR)
#define MCUCSR MCUSR
#endif
//watchdog registers to the same name (WDTCSR)
#if !defined(WDTCSR)
#define WDTCSR WDTCR
#endif
//if enhanced watchdog, define irq values, create disable macro
#if defined(WDIF)
#define WD_IRQ 0xC0
#define WD_RST_IRQ 0xC8
#define WD_DISABLE() do{ \
MCUCSR &= ~(1<<WDRF); \
WD_SET(WD_OFF); \
}while(0)
#endif
//all watchdogs
#define WD_RST 8
#define WD_OFF 0
//prescale values
#define WDTO_15MS 0
#define WDTO_30MS 1
#define WDTO_60MS 2
#define WDTO_120MS 3
#define WDTO_250MS 4
#define WDTO_500MS 5
#define WDTO_1S 6
#define WDTO_2S 7
//prescale values for avrs with WDP3
#if defined(WDP3)
#define WDTO_4S 0x20
#define WDTO_8S 0x21
#endif
//watchdog reset
#define WDR() __asm__ __volatile__("wdr")
//avr reset using watchdog
#define WD_AVR_RESET() do{ \
__asm__ __volatile__("cli"); \
WD_SET_UNSAFE(WD_RST); \
while(1); \
}while(0)
/*set the watchdog-
1. save SREG
2. turn off irq's
3. reset watchdog timer
4. enable watchdog change
5. write watchdog value
6. restore SREG (restoring irq status)
*/
#define WD_SET(val,...) \
__asm__ __volatile__( \
"in __tmp_reg__,__SREG__" "\n\t" \
"cli" "\n\t" \
"wdr" "\n\t" \
"sts %[wdreg],%[wden]" "\n\t" \
"sts %[wdreg],%[wdval]" "\n\t" \
"out __SREG__,__tmp_reg__" "\n\t" \
: \
: [wdreg] "M" (&WDTCSR), \
[wden] "r" ((uint8_t)(0x18)), \
[wdval] "r" ((uint8_t)(val|(__VA_ARGS__+0))) \
: "r0" \
)
/*set the watchdog when I bit in SREG known to be clear-
1. reset watchdog timer
2. enable watchdog change
5. write watchdog value
*/
#define WD_SET_UNSAFE(val,...) \
__asm__ __volatile__( \
"wdr" "\n\t" \
"sts %[wdreg],%[wden]" "\n\t" \
"sts %[wdreg],%[wdval]" "\n\t" \
: \
: [wdreg] "M" (&WDTCSR), \
[wden] "r" ((uint8_t)(0x18)), \
[wdval] "r" ((uint8_t)(val|(__VA_ARGS__+0))) \
)
//for compatibility with avr/wdt.h
#define wdt_enable(val) WD_SET(WD_RST,val)
#define wdt_disable() WD_SET(WD_OFF)
#endif /* _AVR_WD_H_ */

322
tmk_core/protocol/lufa/LUFA-git/Bootloaders/CDC/asf.xml
View file

@ -1,161 +1,161 @@
<asf xmlversion="1.0">
<project caption="CDC Bootloader - 128KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.128_4" force-caption="true" workspace-name="lufa_cdc_128kb_4kb_">
<require idref="lufa.bootloaders.cdc"/>
<require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/>
<device-support value="at90usb1287"/>
<config name="lufa.drivers.board.name" value="none"/>
<config name="config.compiler.optimization.level" value="size"/>
<build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/>
<build type="define" name="BOOT_START_ADDR" value="0x1F000"/>
<build type="linker-config" subtype="flags" value="--section-start=.text=0x1F000"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FFA0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FFE0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FFF8"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
</project>
<project caption="CDC Bootloader - 64KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.64_4" force-caption="true" workspace-name="lufa_cdc_64kb_4kb_">
<require idref="lufa.bootloaders.cdc"/>
<require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/>
<device-support value="at90usb647"/>
<config name="lufa.drivers.board.name" value="none"/>
<config name="config.compiler.optimization.level" value="size"/>
<build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/>
<build type="define" name="BOOT_START_ADDR" value="0xF000"/>
<build type="linker-config" subtype="flags" value="--section-start=.text=0xF000"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0xFFA0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0xFFE0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0xFFF8"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
</project>
<project caption="CDC Bootloader - 32KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.32_4" force-caption="true" workspace-name="lufa_cdc_32kb_4kb_">
<require idref="lufa.bootloaders.cdc"/>
<require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/>
<device-support value="atmega32u4"/>
<config name="lufa.drivers.board.name" value="none"/>
<config name="config.compiler.optimization.level" value="size"/>
<build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/>
<build type="define" name="BOOT_START_ADDR" value="0x7000"/>
<build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x7FA0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x7FE0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x7FF8"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
</project>
<project caption="CDC Bootloader - 16KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.16_4" force-caption="true" workspace-name="lufa_cdc_16kb_4kb_">
<require idref="lufa.bootloaders.cdc"/>
<require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/>
<device-support value="atmega16u2"/>
<config name="lufa.drivers.board.name" value="none"/>
<config name="config.compiler.optimization.level" value="size"/>
<build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/>
<build type="define" name="BOOT_START_ADDR" value="0x3000"/>
<build type="linker-config" subtype="flags" value="--section-start=.text=0x3000"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x3FA0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x3FE0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x3FF8"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
</project>
<project caption="CDC Bootloader - 8KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.8_4" force-caption="true" workspace-name="lufa_cdc_8kb_4kb_">
<require idref="lufa.bootloaders.cdc"/>
<require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/>
<device-support value="atmega8u2"/>
<config name="lufa.drivers.board.name" value="none"/>
<config name="config.compiler.optimization.level" value="size"/>
<build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/>
<build type="define" name="BOOT_START_ADDR" value="0x1000"/>
<build type="linker-config" subtype="flags" value="--section-start=.text=0x1000"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FA0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FE0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FF8"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
</project>
<module type="application" id="lufa.bootloaders.cdc" caption="CDC Bootloader">
<info type="description" value="summary">
CDC Class Bootloader, capable of reprogramming a device using avrdude or other AVR109 protocol compliant software when plugged into a host.
</info>
<info type="gui-flag" value="move-to-root"/>
<info type="keyword" value="Technology">
<keyword value="Bootloaders"/>
<keyword value="USB Device"/>
</info>
<device-support-alias value="lufa_avr8"/>
<device-support-alias value="lufa_xmega"/>
<device-support-alias value="lufa_uc3"/>
<build type="include-path" value="."/>
<build type="c-source" value="BootloaderCDC.c"/>
<build type="header-file" value="BootloaderCDC.h"/>
<build type="c-source" value="Descriptors.c"/>
<build type="header-file" value="Descriptors.h"/>
<build type="c-source" value="BootloaderAPI.c"/>
<build type="header-file" value="BootloaderAPI.h"/>
<build type="asm-source" value="BootloaderAPITable.S"/>
<build type="module-config" subtype="path" value="Config"/>
<build type="header-file" value="Config/LUFAConfig.h"/>
<build type="header-file" value="Config/AppConfig.h"/>
<build type="distribute" subtype="user-file" value="doxyfile"/>
<build type="distribute" subtype="user-file" value="BootloaderCDC.txt"/>
<build type="distribute" subtype="user-file" value="LUFA CDC Bootloader.inf"/>
<require idref="lufa.common"/>
<require idref="lufa.platform"/>
<require idref="lufa.drivers.usb"/>
<require idref="lufa.drivers.board"/>
<require idref="lufa.drivers.board.leds"/>
</module>
</asf>
<asf xmlversion="1.0">
<project caption="CDC Bootloader - 128KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.128_4" force-caption="true" workspace-name="lufa_cdc_128kb_4kb_">
<require idref="lufa.bootloaders.cdc"/>
<require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/>
<device-support value="at90usb1287"/>
<config name="lufa.drivers.board.name" value="none"/>
<config name="config.compiler.optimization.level" value="size"/>
<build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/>
<build type="define" name="BOOT_START_ADDR" value="0x1F000"/>
<build type="linker-config" subtype="flags" value="--section-start=.text=0x1F000"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FFA0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FFE0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FFF8"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
</project>
<project caption="CDC Bootloader - 64KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.64_4" force-caption="true" workspace-name="lufa_cdc_64kb_4kb_">
<require idref="lufa.bootloaders.cdc"/>
<require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/>
<device-support value="at90usb647"/>
<config name="lufa.drivers.board.name" value="none"/>
<config name="config.compiler.optimization.level" value="size"/>
<build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/>
<build type="define" name="BOOT_START_ADDR" value="0xF000"/>
<build type="linker-config" subtype="flags" value="--section-start=.text=0xF000"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0xFFA0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0xFFE0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0xFFF8"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
</project>
<project caption="CDC Bootloader - 32KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.32_4" force-caption="true" workspace-name="lufa_cdc_32kb_4kb_">
<require idref="lufa.bootloaders.cdc"/>
<require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/>
<device-support value="atmega32u4"/>
<config name="lufa.drivers.board.name" value="none"/>
<config name="config.compiler.optimization.level" value="size"/>
<build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/>
<build type="define" name="BOOT_START_ADDR" value="0x7000"/>
<build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x7FA0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x7FE0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x7FF8"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
</project>
<project caption="CDC Bootloader - 16KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.16_4" force-caption="true" workspace-name="lufa_cdc_16kb_4kb_">
<require idref="lufa.bootloaders.cdc"/>
<require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/>
<device-support value="atmega16u2"/>
<config name="lufa.drivers.board.name" value="none"/>
<config name="config.compiler.optimization.level" value="size"/>
<build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/>
<build type="define" name="BOOT_START_ADDR" value="0x3000"/>
<build type="linker-config" subtype="flags" value="--section-start=.text=0x3000"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x3FA0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x3FE0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x3FF8"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
</project>
<project caption="CDC Bootloader - 8KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.8_4" force-caption="true" workspace-name="lufa_cdc_8kb_4kb_">
<require idref="lufa.bootloaders.cdc"/>
<require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/>
<device-support value="atmega8u2"/>
<config name="lufa.drivers.board.name" value="none"/>
<config name="config.compiler.optimization.level" value="size"/>
<build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/>
<build type="define" name="BOOT_START_ADDR" value="0x1000"/>
<build type="linker-config" subtype="flags" value="--section-start=.text=0x1000"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FA0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FE0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FF8"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
</project>
<module type="application" id="lufa.bootloaders.cdc" caption="CDC Bootloader">
<info type="description" value="summary">
CDC Class Bootloader, capable of reprogramming a device using avrdude or other AVR109 protocol compliant software when plugged into a host.
</info>
<info type="gui-flag" value="move-to-root"/>
<info type="keyword" value="Technology">
<keyword value="Bootloaders"/>
<keyword value="USB Device"/>
</info>
<device-support-alias value="lufa_avr8"/>
<device-support-alias value="lufa_xmega"/>
<device-support-alias value="lufa_uc3"/>
<build type="include-path" value="."/>
<build type="c-source" value="BootloaderCDC.c"/>
<build type="header-file" value="BootloaderCDC.h"/>
<build type="c-source" value="Descriptors.c"/>
<build type="header-file" value="Descriptors.h"/>
<build type="c-source" value="BootloaderAPI.c"/>
<build type="header-file" value="BootloaderAPI.h"/>
<build type="asm-source" value="BootloaderAPITable.S"/>
<build type="module-config" subtype="path" value="Config"/>
<build type="header-file" value="Config/LUFAConfig.h"/>
<build type="header-file" value="Config/AppConfig.h"/>
<build type="distribute" subtype="user-file" value="doxyfile"/>
<build type="distribute" subtype="user-file" value="BootloaderCDC.txt"/>
<build type="distribute" subtype="user-file" value="LUFA CDC Bootloader.inf"/>
<require idref="lufa.common"/>
<require idref="lufa.platform"/>
<require idref="lufa.drivers.usb"/>
<require idref="lufa.drivers.board"/>
<require idref="lufa.drivers.board.leds"/>
</module>
</asf>

312
tmk_core/protocol/lufa/LUFA-git/Bootloaders/DFU/asf.xml
View file

@ -1,156 +1,156 @@
<asf xmlversion="1.0">
<project caption="DFU Bootloader - 128KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.128_4" force-caption="true" workspace-name="lufa_dfu_128kb_4kb_">
<require idref="lufa.bootloaders.dfu"/>
<require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/>
<device-support value="at90usb1287"/>
<config name="lufa.drivers.board.name" value="none"/>
<config name="config.compiler.optimization.level" value="size"/>
<build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/>
<build type="define" name="BOOT_START_ADDR" value="0x1F000"/>
<build type="linker-config" subtype="flags" value="--section-start=.text=0x1F000"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FFA0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FFE0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FFF8"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
</project>
<project caption="DFU Bootloader - 64KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.64_4" force-caption="true" workspace-name="lufa_dfu_64kb_4kb_">
<require idref="lufa.bootloaders.dfu"/>
<require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/>
<device-support value="at90usb647"/>
<config name="lufa.drivers.board.name" value="none"/>
<config name="config.compiler.optimization.level" value="size"/>
<build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/>
<build type="define" name="BOOT_START_ADDR" value="0xF000"/>
<build type="linker-config" subtype="flags" value="--section-start=.text=0xF000"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0xFFA0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0xFFE0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0xFFF8"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
</project>
<project caption="DFU Bootloader - 32KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.32_4" force-caption="true" workspace-name="lufa_dfu_32kb_4kb_">
<require idref="lufa.bootloaders.dfu"/>
<require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/>
<device-support value="atmega32u4"/>
<config name="lufa.drivers.board.name" value="none"/>
<config name="config.compiler.optimization.level" value="size"/>
<build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/>
<build type="define" name="BOOT_START_ADDR" value="0x7000"/>
<build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x7FA0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x7FE0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x7FF8"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
</project>
<project caption="DFU Bootloader - 16KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.16_4" force-caption="true" workspace-name="lufa_dfu_16kb_4kb_">
<require idref="lufa.bootloaders.dfu"/>
<require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/>
<device-support value="atmega16u2"/>
<config name="lufa.drivers.board.name" value="none"/>
<build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/>
<build type="define" name="BOOT_START_ADDR" value="0x3000"/>
<build type="linker-config" subtype="flags" value="--section-start=.text=0x3000"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x3FA0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x3FE0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x3FF8"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
</project>
<project caption="DFU Bootloader - 8KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.8_4" force-caption="true" workspace-name="lufa_dfu_8kb_4kb_">
<require idref="lufa.bootloaders.dfu"/>
<require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/>
<device-support value="atmega8u2"/>
<config name="lufa.drivers.board.name" value="none"/>
<build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/>
<build type="define" name="BOOT_START_ADDR" value="0x1000"/>
<build type="linker-config" subtype="flags" value="--section-start=.text=0x1000"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FA0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FE0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FF8"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
</project>
<module type="application" id="lufa.bootloaders.dfu" caption="DFU Bootloader">
<info type="description" value="summary">
DFU Class Bootloader, capable of reprogramming a device using the Atmel FLIP or other AVR DFU programming software when plugged into a host.
</info>
<info type="gui-flag" value="move-to-root"/>
<info type="keyword" value="Technology">
<keyword value="Bootloaders"/>
<keyword value="USB Device"/>
</info>
<device-support-alias value="lufa_avr8"/>
<device-support-alias value="lufa_xmega"/>
<device-support-alias value="lufa_uc3"/>
<build type="include-path" value="."/>
<build type="c-source" value="BootloaderDFU.c"/>
<build type="header-file" value="BootloaderDFU.h"/>
<build type="c-source" value="Descriptors.c"/>
<build type="header-file" value="Descriptors.h"/>
<build type="c-source" value="BootloaderAPI.c"/>
<build type="header-file" value="BootloaderAPI.h"/>
<build type="asm-source" value="BootloaderAPITable.S"/>
<build type="module-config" subtype="path" value="Config"/>
<build type="header-file" value="Config/LUFAConfig.h"/>
<build type="header-file" value="Config/AppConfig.h"/>
<build type="distribute" subtype="user-file" value="doxyfile"/>
<build type="distribute" subtype="user-file" value="BootloaderDFU.txt"/>
<require idref="lufa.common"/>
<require idref="lufa.platform"/>
<require idref="lufa.drivers.usb"/>
<require idref="lufa.drivers.board"/>
<require idref="lufa.drivers.board.leds"/>
</module>
</asf>
<asf xmlversion="1.0">
<project caption="DFU Bootloader - 128KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.128_4" force-caption="true" workspace-name="lufa_dfu_128kb_4kb_">
<require idref="lufa.bootloaders.dfu"/>
<require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/>
<device-support value="at90usb1287"/>
<config name="lufa.drivers.board.name" value="none"/>
<config name="config.compiler.optimization.level" value="size"/>
<build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/>
<build type="define" name="BOOT_START_ADDR" value="0x1F000"/>
<build type="linker-config" subtype="flags" value="--section-start=.text=0x1F000"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FFA0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FFE0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FFF8"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
</project>
<project caption="DFU Bootloader - 64KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.64_4" force-caption="true" workspace-name="lufa_dfu_64kb_4kb_">
<require idref="lufa.bootloaders.dfu"/>
<require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/>
<device-support value="at90usb647"/>
<config name="lufa.drivers.board.name" value="none"/>
<config name="config.compiler.optimization.level" value="size"/>
<build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/>
<build type="define" name="BOOT_START_ADDR" value="0xF000"/>
<build type="linker-config" subtype="flags" value="--section-start=.text=0xF000"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0xFFA0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0xFFE0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0xFFF8"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
</project>
<project caption="DFU Bootloader - 32KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.32_4" force-caption="true" workspace-name="lufa_dfu_32kb_4kb_">
<require idref="lufa.bootloaders.dfu"/>
<require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/>
<device-support value="atmega32u4"/>
<config name="lufa.drivers.board.name" value="none"/>
<config name="config.compiler.optimization.level" value="size"/>
<build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/>
<build type="define" name="BOOT_START_ADDR" value="0x7000"/>
<build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x7FA0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x7FE0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x7FF8"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
</project>
<project caption="DFU Bootloader - 16KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.16_4" force-caption="true" workspace-name="lufa_dfu_16kb_4kb_">
<require idref="lufa.bootloaders.dfu"/>
<require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/>
<device-support value="atmega16u2"/>
<config name="lufa.drivers.board.name" value="none"/>
<build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/>
<build type="define" name="BOOT_START_ADDR" value="0x3000"/>
<build type="linker-config" subtype="flags" value="--section-start=.text=0x3000"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x3FA0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x3FE0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x3FF8"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
</project>
<project caption="DFU Bootloader - 8KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.8_4" force-caption="true" workspace-name="lufa_dfu_8kb_4kb_">
<require idref="lufa.bootloaders.dfu"/>
<require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/>
<device-support value="atmega8u2"/>
<config name="lufa.drivers.board.name" value="none"/>
<build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/>
<build type="define" name="BOOT_START_ADDR" value="0x1000"/>
<build type="linker-config" subtype="flags" value="--section-start=.text=0x1000"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FA0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FE0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FF8"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
</project>
<module type="application" id="lufa.bootloaders.dfu" caption="DFU Bootloader">
<info type="description" value="summary">
DFU Class Bootloader, capable of reprogramming a device using the Atmel FLIP or other AVR DFU programming software when plugged into a host.
</info>
<info type="gui-flag" value="move-to-root"/>
<info type="keyword" value="Technology">
<keyword value="Bootloaders"/>
<keyword value="USB Device"/>
</info>
<device-support-alias value="lufa_avr8"/>
<device-support-alias value="lufa_xmega"/>
<device-support-alias value="lufa_uc3"/>
<build type="include-path" value="."/>
<build type="c-source" value="BootloaderDFU.c"/>
<build type="header-file" value="BootloaderDFU.h"/>
<build type="c-source" value="Descriptors.c"/>
<build type="header-file" value="Descriptors.h"/>
<build type="c-source" value="BootloaderAPI.c"/>
<build type="header-file" value="BootloaderAPI.h"/>
<build type="asm-source" value="BootloaderAPITable.S"/>
<build type="module-config" subtype="path" value="Config"/>
<build type="header-file" value="Config/LUFAConfig.h"/>
<build type="header-file" value="Config/AppConfig.h"/>
<build type="distribute" subtype="user-file" value="doxyfile"/>
<build type="distribute" subtype="user-file" value="BootloaderDFU.txt"/>
<require idref="lufa.common"/>
<require idref="lufa.platform"/>
<require idref="lufa.drivers.usb"/>
<require idref="lufa.drivers.board"/>
<require idref="lufa.drivers.board.leds"/>
</module>
</asf>

246
tmk_core/protocol/lufa/LUFA-git/Bootloaders/HID/asf.xml
View file

@ -1,123 +1,123 @@
<asf xmlversion="1.0">
<project caption="HID Bootloader - 128KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.128_4" force-caption="true" workspace-name="lufa_hid_128kb_4kb_">
<require idref="lufa.bootloaders.hid"/>
<require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/>
<device-support value="at90usb1287"/>
<config name="lufa.drivers.board.name" value="none"/>
<config name="config.compiler.optimization.level" value="size"/>
<build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/>
<build type="define" name="BOOT_START_ADDR" value="0x1F000"/>
<build type="linker-config" subtype="flags" value="--section-start=.text=0x1F000"/>
</project>
<project caption="HID Bootloader - 64KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.64_4" force-caption="true" workspace-name="lufa_hid_64kb_4kb_">
<require idref="lufa.bootloaders.hid"/>
<require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/>
<device-support value="at90usb647"/>
<config name="lufa.drivers.board.name" value="none"/>
<config name="config.compiler.optimization.level" value="size"/>
<build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/>
<build type="define" name="BOOT_START_ADDR" value="0xF000"/>
<build type="linker-config" subtype="flags" value="--section-start=.text=0xF000"/>
</project>
<project caption="HID Bootloader - 32KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.32_4" force-caption="true" workspace-name="lufa_hid_32kb_4kb_">
<require idref="lufa.bootloaders.hid"/>
<require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/>
<device-support value="atmega32u4"/>
<config name="lufa.drivers.board.name" value="none"/>
<config name="config.compiler.optimization.level" value="size"/>
<build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/>
<build type="define" name="BOOT_START_ADDR" value="0x7000"/>
<build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>
</project>
<project caption="HID Bootloader - 16KB FLASH / 2KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.16_2" force-caption="true" workspace-name="lufa_hid_16kb_2kb_">
<require idref="lufa.bootloaders.hid"/>
<require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/>
<device-support value="atmega16u2"/>
<config name="lufa.drivers.board.name" value="none"/>
<config name="config.compiler.optimization.level" value="size"/>
<build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/>
<build type="define" name="BOOT_START_ADDR" value="0x3800"/>
<build type="linker-config" subtype="flags" value="--section-start=.text=0x3800"/>
</project>
<project caption="HID Bootloader - 8KB FLASH / 2KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.8_2" force-caption="true" workspace-name="lufa_hid_8kb_2kb_">
<require idref="lufa.bootloaders.hid"/>
<require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/>
<device-support value="atmega8u2"/>
<config name="lufa.drivers.board.name" value="none"/>
<config name="config.compiler.optimization.level" value="size"/>
<build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/>
<build type="define" name="BOOT_START_ADDR" value="0x1800"/>
<build type="linker-config" subtype="flags" value="--section-start=.text=0x1800"/>
</project>
<module type="application" id="lufa.bootloaders.hid" caption="HID Bootloader">
<info type="description" value="summary">
HID Class Bootloader, capable of reprogramming a device via a custom cross-platform command line utility when plugged into a host.
</info>
<info type="gui-flag" value="move-to-root"/>
<info type="keyword" value="Technology">
<keyword value="Bootloaders"/>
<keyword value="USB Device"/>
</info>
<device-support-alias value="lufa_avr8"/>
<device-support-alias value="lufa_xmega"/>
<device-support-alias value="lufa_uc3"/>
<build type="include-path" value="."/>
<build type="c-source" value="BootloaderHID.c"/>
<build type="header-file" value="BootloaderHID.h"/>
<build type="c-source" value="Descriptors.c"/>
<build type="header-file" value="Descriptors.h"/>
<build type="module-config" subtype="path" value="Config"/>
<build type="header-file" value="Config/LUFAConfig.h"/>
<build type="distribute" subtype="user-file" value="doxyfile"/>
<build type="distribute" subtype="user-file" value="BootloaderHID.txt"/>
<build type="distribute" subtype="directory" value="HostLoaderApp"/>
<build type="distribute" subtype="directory" value="HostLoaderApp_Python"/>
<require idref="lufa.common"/>
<require idref="lufa.platform"/>
<require idref="lufa.drivers.usb"/>
<require idref="lufa.drivers.board"/>
<require idref="lufa.drivers.board.leds"/>
</module>
</asf>
<asf xmlversion="1.0">
<project caption="HID Bootloader - 128KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.128_4" force-caption="true" workspace-name="lufa_hid_128kb_4kb_">
<require idref="lufa.bootloaders.hid"/>
<require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/>
<device-support value="at90usb1287"/>
<config name="lufa.drivers.board.name" value="none"/>
<config name="config.compiler.optimization.level" value="size"/>
<build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/>
<build type="define" name="BOOT_START_ADDR" value="0x1F000"/>
<build type="linker-config" subtype="flags" value="--section-start=.text=0x1F000"/>
</project>
<project caption="HID Bootloader - 64KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.64_4" force-caption="true" workspace-name="lufa_hid_64kb_4kb_">
<require idref="lufa.bootloaders.hid"/>
<require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/>
<device-support value="at90usb647"/>
<config name="lufa.drivers.board.name" value="none"/>
<config name="config.compiler.optimization.level" value="size"/>
<build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/>
<build type="define" name="BOOT_START_ADDR" value="0xF000"/>
<build type="linker-config" subtype="flags" value="--section-start=.text=0xF000"/>
</project>
<project caption="HID Bootloader - 32KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.32_4" force-caption="true" workspace-name="lufa_hid_32kb_4kb_">
<require idref="lufa.bootloaders.hid"/>
<require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/>
<device-support value="atmega32u4"/>
<config name="lufa.drivers.board.name" value="none"/>
<config name="config.compiler.optimization.level" value="size"/>
<build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/>
<build type="define" name="BOOT_START_ADDR" value="0x7000"/>
<build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>
</project>
<project caption="HID Bootloader - 16KB FLASH / 2KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.16_2" force-caption="true" workspace-name="lufa_hid_16kb_2kb_">
<require idref="lufa.bootloaders.hid"/>
<require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/>
<device-support value="atmega16u2"/>
<config name="lufa.drivers.board.name" value="none"/>
<config name="config.compiler.optimization.level" value="size"/>
<build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/>
<build type="define" name="BOOT_START_ADDR" value="0x3800"/>
<build type="linker-config" subtype="flags" value="--section-start=.text=0x3800"/>
</project>
<project caption="HID Bootloader - 8KB FLASH / 2KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.8_2" force-caption="true" workspace-name="lufa_hid_8kb_2kb_">
<require idref="lufa.bootloaders.hid"/>
<require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/>
<device-support value="atmega8u2"/>
<config name="lufa.drivers.board.name" value="none"/>
<config name="config.compiler.optimization.level" value="size"/>
<build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/>
<build type="define" name="BOOT_START_ADDR" value="0x1800"/>
<build type="linker-config" subtype="flags" value="--section-start=.text=0x1800"/>
</project>
<module type="application" id="lufa.bootloaders.hid" caption="HID Bootloader">
<info type="description" value="summary">
HID Class Bootloader, capable of reprogramming a device via a custom cross-platform command line utility when plugged into a host.
</info>
<info type="gui-flag" value="move-to-root"/>
<info type="keyword" value="Technology">
<keyword value="Bootloaders"/>
<keyword value="USB Device"/>
</info>
<device-support-alias value="lufa_avr8"/>
<device-support-alias value="lufa_xmega"/>
<device-support-alias value="lufa_uc3"/>
<build type="include-path" value="."/>
<build type="c-source" value="BootloaderHID.c"/>
<build type="header-file" value="BootloaderHID.h"/>
<build type="c-source" value="Descriptors.c"/>
<build type="header-file" value="Descriptors.h"/>
<build type="module-config" subtype="path" value="Config"/>
<build type="header-file" value="Config/LUFAConfig.h"/>
<build type="distribute" subtype="user-file" value="doxyfile"/>
<build type="distribute" subtype="user-file" value="BootloaderHID.txt"/>
<build type="distribute" subtype="directory" value="HostLoaderApp"/>
<build type="distribute" subtype="directory" value="HostLoaderApp_Python"/>
<require idref="lufa.common"/>
<require idref="lufa.platform"/>
<require idref="lufa.drivers.usb"/>
<require idref="lufa.drivers.board"/>
<require idref="lufa.drivers.board.leds"/>
</module>
</asf>

204
tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/BootloaderAPITable.S
View file

@ -1,102 +1,102 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2014.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaims all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
#if AUX_BOOT_SECTION_SIZE > 0
#warning Using a AUX bootloader section in addition to the defined bootloader space (see documentation).
; Trampoline to jump over the AUX bootloader section to the start of the bootloader,
; on devices where an AUX bootloader section is used.
.section .boot_aux_trampoline, "ax"
.global Boot_AUX_Trampoline
Boot_AUX_Trampoline:
jmp BOOT_START_ADDR
#endif
; Trampolines to actual API implementations if the target address is outside the
; range of a rjmp instruction (can happen with large bootloader sections)
.section .apitable_trampolines, "ax"
.global BootloaderAPI_Trampolines
BootloaderAPI_Trampolines:
BootloaderAPI_ErasePage_Trampoline:
jmp BootloaderAPI_ErasePage
BootloaderAPI_WritePage_Trampoline:
jmp BootloaderAPI_WritePage
BootloaderAPI_FillWord_Trampoline:
jmp BootloaderAPI_FillWord
BootloaderAPI_ReadSignature_Trampoline:
jmp BootloaderAPI_ReadSignature
BootloaderAPI_ReadFuse_Trampoline:
jmp BootloaderAPI_ReadFuse
BootloaderAPI_ReadLock_Trampoline:
jmp BootloaderAPI_ReadLock
BootloaderAPI_WriteLock_Trampoline:
jmp BootloaderAPI_WriteLock
BootloaderAPI_UNUSED1:
ret
BootloaderAPI_UNUSED2:
ret
BootloaderAPI_UNUSED3:
ret
BootloaderAPI_UNUSED4:
ret
BootloaderAPI_UNUSED5:
ret
; API function jump table
.section .apitable_jumptable, "ax"
.global BootloaderAPI_JumpTable
BootloaderAPI_JumpTable:
rjmp BootloaderAPI_ErasePage_Trampoline
rjmp BootloaderAPI_WritePage_Trampoline
rjmp BootloaderAPI_FillWord_Trampoline
rjmp BootloaderAPI_ReadSignature_Trampoline
rjmp BootloaderAPI_ReadFuse_Trampoline
rjmp BootloaderAPI_ReadLock_Trampoline
rjmp BootloaderAPI_WriteLock_Trampoline
rjmp BootloaderAPI_UNUSED1 ; UNUSED ENTRY 1
rjmp BootloaderAPI_UNUSED2 ; UNUSED ENTRY 2
rjmp BootloaderAPI_UNUSED3 ; UNUSED ENTRY 3
rjmp BootloaderAPI_UNUSED4 ; UNUSED ENTRY 4
rjmp BootloaderAPI_UNUSED5 ; UNUSED ENTRY 5
; Bootloader table signatures and information
.section .apitable_signatures, "ax"
.global BootloaderAPI_Signatures
BootloaderAPI_Signatures:
.long BOOT_START_ADDR ; Start address of the bootloader
.word 0xDF30 ; Signature for the MS class bootloader, V1
.word 0xDCFB ; Signature for a LUFA class bootloader
/*
LUFA Library
Copyright (C) Dean Camera, 2014.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaims all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
#if AUX_BOOT_SECTION_SIZE > 0
#warning Using a AUX bootloader section in addition to the defined bootloader space (see documentation).
; Trampoline to jump over the AUX bootloader section to the start of the bootloader,
; on devices where an AUX bootloader section is used.
.section .boot_aux_trampoline, "ax"
.global Boot_AUX_Trampoline
Boot_AUX_Trampoline:
jmp BOOT_START_ADDR
#endif
; Trampolines to actual API implementations if the target address is outside the
; range of a rjmp instruction (can happen with large bootloader sections)
.section .apitable_trampolines, "ax"
.global BootloaderAPI_Trampolines
BootloaderAPI_Trampolines:
BootloaderAPI_ErasePage_Trampoline:
jmp BootloaderAPI_ErasePage
BootloaderAPI_WritePage_Trampoline:
jmp BootloaderAPI_WritePage
BootloaderAPI_FillWord_Trampoline:
jmp BootloaderAPI_FillWord
BootloaderAPI_ReadSignature_Trampoline:
jmp BootloaderAPI_ReadSignature
BootloaderAPI_ReadFuse_Trampoline:
jmp BootloaderAPI_ReadFuse
BootloaderAPI_ReadLock_Trampoline:
jmp BootloaderAPI_ReadLock
BootloaderAPI_WriteLock_Trampoline:
jmp BootloaderAPI_WriteLock
BootloaderAPI_UNUSED1:
ret
BootloaderAPI_UNUSED2:
ret
BootloaderAPI_UNUSED3:
ret
BootloaderAPI_UNUSED4:
ret
BootloaderAPI_UNUSED5:
ret
; API function jump table
.section .apitable_jumptable, "ax"
.global BootloaderAPI_JumpTable
BootloaderAPI_JumpTable:
rjmp BootloaderAPI_ErasePage_Trampoline
rjmp BootloaderAPI_WritePage_Trampoline
rjmp BootloaderAPI_FillWord_Trampoline
rjmp BootloaderAPI_ReadSignature_Trampoline
rjmp BootloaderAPI_ReadFuse_Trampoline
rjmp BootloaderAPI_ReadLock_Trampoline
rjmp BootloaderAPI_WriteLock_Trampoline
rjmp BootloaderAPI_UNUSED1 ; UNUSED ENTRY 1
rjmp BootloaderAPI_UNUSED2 ; UNUSED ENTRY 2
rjmp BootloaderAPI_UNUSED3 ; UNUSED ENTRY 3
rjmp BootloaderAPI_UNUSED4 ; UNUSED ENTRY 4
rjmp BootloaderAPI_UNUSED5 ; UNUSED ENTRY 5
; Bootloader table signatures and information
.section .apitable_signatures, "ax"
.global BootloaderAPI_Signatures
BootloaderAPI_Signatures:
.long BOOT_START_ADDR ; Start address of the bootloader
.word 0xDF30 ; Signature for the MS class bootloader, V1
.word 0xDCFB ; Signature for a LUFA class bootloader

312
tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/asf.xml
View file

@ -1,156 +1,156 @@
<asf xmlversion="1.0">
<project caption="Mass Storage Bootloader - 128KB FLASH / 8KB Boot - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.128_8" force-caption="true" workspace-name="lufa_ms_128kb_8kb_">
<require idref="lufa.bootloaders.mass_storage"/>
<require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/>
<device-support value="at90usb1287"/>
<config name="lufa.drivers.board.name" value="none"/>
<config name="config.compiler.optimization.level" value="size"/>
<build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/>
<build type="define" name="BOOT_START_ADDR" value="0x1E000"/>
<build type="linker-config" subtype="flags" value="--section-start=.text=0x1E000"/>
<build type="define" name="AUX_BOOT_SECTION_SIZE" value="0"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FFA0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FFE0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FFF8"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
</project>
<project caption="Mass Storage Bootloader - 64KB FLASH / 8KB Boot - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.64_8" force-caption="true" workspace-name="lufa_ms_64kb_8kb_">
<require idref="lufa.bootloaders.mass_storage"/>
<require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/>
<device-support value="at90usb647"/>
<config name="lufa.drivers.board.name" value="none"/>
<config name="config.compiler.optimization.level" value="size"/>
<build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/>
<build type="define" name="BOOT_START_ADDR" value="0xE000"/>
<build type="linker-config" subtype="flags" value="--section-start=.text=0xE000"/>
<build type="define" name="AUX_BOOT_SECTION_SIZE" value="0"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0xFFA0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0xFFE0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0xFFF8"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
</project>
<project caption="Mass Storage Bootloader - 32KB FLASH / 4KB Boot (2KB AUX) - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.32_4" force-caption="true" workspace-name="lufa_ms_32kb_4kb_">
<require idref="lufa.bootloaders.mass_storage"/>
<require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/>
<device-support value="atmega32u4"/>
<config name="lufa.drivers.board.name" value="none"/>
<config name="config.compiler.optimization.level" value="size"/>
<build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/>
<build type="define" name="BOOT_START_ADDR" value="0x7000"/>
<build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>
<build type="define" name="AUX_BOOT_SECTION_SIZE" value="2048"/>
<build type="linker-config" subtype="flags" value="--section-start=.boot_aux=0x6810"/>
<build type="linker-config" subtype="flags" value="--section-start=.boot_aux_trampoline=0x6800"/>
<build type="linker-config" subtype="flags" value="--undefined=Boot_AUX_Trampoline"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x7FA0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x7FE0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x7FF8"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
</project>
<project caption="Mass Storage Bootloader - 16KB FLASH / 4KB Boot (2KB AUX) - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.16_4" force-caption="true" workspace-name="lufa_ms_16kb_4kb_">
<require idref="lufa.bootloaders.mass_storage"/>
<require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/>
<device-support value="atmega16u2"/>
<config name="lufa.drivers.board.name" value="none"/>
<config name="config.compiler.optimization.level" value="size"/>
<build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/>
<build type="define" name="BOOT_START_ADDR" value="0x3000"/>
<build type="linker-config" subtype="flags" value="--section-start=.text=0x3000"/>
<build type="define" name="AUX_BOOT_SECTION_SIZE" value="2048"/>
<build type="linker-config" subtype="flags" value="--section-start=.boot_aux=0x2810"/>
<build type="linker-config" subtype="flags" value="--section-start=.boot_aux_trampoline=0x2800"/>
<build type="linker-config" subtype="flags" value="--undefined=Boot_AUX_Trampoline"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x3FA0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x3FE0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x3FF8"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
</project>
<module type="application" id="lufa.bootloaders.mass_storage" caption="Mass Storage Bootloader">
<info type="description" value="summary">
Mass Storage Class Bootloader, capable of reprogramming a device via binary BIN files copied to the virtual FAT12 file-system it creates when plugged into a host.
</info>
<info type="gui-flag" value="move-to-root"/>
<info type="keyword" value="Technology">
<keyword value="Bootloaders"/>
<keyword value="USB Device"/>
</info>
<device-support-alias value="lufa_avr8"/>
<device-support-alias value="lufa_xmega"/>
<device-support-alias value="lufa_uc3"/>
<build type="include-path" value="."/>
<build type="c-source" value="BootloaderMassStorage.c"/>
<build type="header-file" value="BootloaderMassStorage.h"/>
<build type="c-source" value="Descriptors.c"/>
<build type="header-file" value="Descriptors.h"/>
<build type="c-source" value="BootloaderAPI.c"/>
<build type="header-file" value="BootloaderAPI.h"/>
<build type="asm-source" value="BootloaderAPITable.S"/>
<build type="module-config" subtype="path" value="Config"/>
<build type="header-file" value="Config/LUFAConfig.h"/>
<build type="header-file" value="Config/AppConfig.h"/>
<build type="include-path" value="Lib"/>
<build type="header-file" value="Lib/VirtualFAT.h"/>
<build type="c-source" value="Lib/VirtualFAT.c"/>
<build type="header-file" value="Lib/SCSI.h"/>
<build type="c-source" value="Lib/SCSI.c"/>
<build type="distribute" subtype="user-file" value="doxyfile"/>
<build type="distribute" subtype="user-file" value="BootloaderMassStorage.txt"/>
<require idref="lufa.common"/>
<require idref="lufa.platform"/>
<require idref="lufa.drivers.usb"/>
<require idref="lufa.drivers.board"/>
<require idref="lufa.drivers.board.leds"/>
</module>
</asf>
<asf xmlversion="1.0">
<project caption="Mass Storage Bootloader - 128KB FLASH / 8KB Boot - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.128_8" force-caption="true" workspace-name="lufa_ms_128kb_8kb_">
<require idref="lufa.bootloaders.mass_storage"/>
<require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/>
<device-support value="at90usb1287"/>
<config name="lufa.drivers.board.name" value="none"/>
<config name="config.compiler.optimization.level" value="size"/>
<build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/>
<build type="define" name="BOOT_START_ADDR" value="0x1E000"/>
<build type="linker-config" subtype="flags" value="--section-start=.text=0x1E000"/>
<build type="define" name="AUX_BOOT_SECTION_SIZE" value="0"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FFA0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FFE0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FFF8"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
</project>
<project caption="Mass Storage Bootloader - 64KB FLASH / 8KB Boot - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.64_8" force-caption="true" workspace-name="lufa_ms_64kb_8kb_">
<require idref="lufa.bootloaders.mass_storage"/>
<require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/>
<device-support value="at90usb647"/>
<config name="lufa.drivers.board.name" value="none"/>
<config name="config.compiler.optimization.level" value="size"/>
<build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/>
<build type="define" name="BOOT_START_ADDR" value="0xE000"/>
<build type="linker-config" subtype="flags" value="--section-start=.text=0xE000"/>
<build type="define" name="AUX_BOOT_SECTION_SIZE" value="0"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0xFFA0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0xFFE0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0xFFF8"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
</project>
<project caption="Mass Storage Bootloader - 32KB FLASH / 4KB Boot (2KB AUX) - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.32_4" force-caption="true" workspace-name="lufa_ms_32kb_4kb_">
<require idref="lufa.bootloaders.mass_storage"/>
<require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/>
<device-support value="atmega32u4"/>
<config name="lufa.drivers.board.name" value="none"/>
<config name="config.compiler.optimization.level" value="size"/>
<build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/>
<build type="define" name="BOOT_START_ADDR" value="0x7000"/>
<build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>
<build type="define" name="AUX_BOOT_SECTION_SIZE" value="2048"/>
<build type="linker-config" subtype="flags" value="--section-start=.boot_aux=0x6810"/>
<build type="linker-config" subtype="flags" value="--section-start=.boot_aux_trampoline=0x6800"/>
<build type="linker-config" subtype="flags" value="--undefined=Boot_AUX_Trampoline"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x7FA0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x7FE0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x7FF8"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
</project>
<project caption="Mass Storage Bootloader - 16KB FLASH / 4KB Boot (2KB AUX) - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.16_4" force-caption="true" workspace-name="lufa_ms_16kb_4kb_">
<require idref="lufa.bootloaders.mass_storage"/>
<require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/>
<device-support value="atmega16u2"/>
<config name="lufa.drivers.board.name" value="none"/>
<config name="config.compiler.optimization.level" value="size"/>
<build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/>
<build type="define" name="BOOT_START_ADDR" value="0x3000"/>
<build type="linker-config" subtype="flags" value="--section-start=.text=0x3000"/>
<build type="define" name="AUX_BOOT_SECTION_SIZE" value="2048"/>
<build type="linker-config" subtype="flags" value="--section-start=.boot_aux=0x2810"/>
<build type="linker-config" subtype="flags" value="--section-start=.boot_aux_trampoline=0x2800"/>
<build type="linker-config" subtype="flags" value="--undefined=Boot_AUX_Trampoline"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x3FA0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x3FE0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x3FF8"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
</project>
<module type="application" id="lufa.bootloaders.mass_storage" caption="Mass Storage Bootloader">
<info type="description" value="summary">
Mass Storage Class Bootloader, capable of reprogramming a device via binary BIN files copied to the virtual FAT12 file-system it creates when plugged into a host.
</info>
<info type="gui-flag" value="move-to-root"/>
<info type="keyword" value="Technology">
<keyword value="Bootloaders"/>
<keyword value="USB Device"/>
</info>
<device-support-alias value="lufa_avr8"/>
<device-support-alias value="lufa_xmega"/>
<device-support-alias value="lufa_uc3"/>
<build type="include-path" value="."/>
<build type="c-source" value="BootloaderMassStorage.c"/>
<build type="header-file" value="BootloaderMassStorage.h"/>
<build type="c-source" value="Descriptors.c"/>
<build type="header-file" value="Descriptors.h"/>
<build type="c-source" value="BootloaderAPI.c"/>
<build type="header-file" value="BootloaderAPI.h"/>
<build type="asm-source" value="BootloaderAPITable.S"/>
<build type="module-config" subtype="path" value="Config"/>
<build type="header-file" value="Config/LUFAConfig.h"/>
<build type="header-file" value="Config/AppConfig.h"/>
<build type="include-path" value="Lib"/>
<build type="header-file" value="Lib/VirtualFAT.h"/>
<build type="c-source" value="Lib/VirtualFAT.c"/>
<build type="header-file" value="Lib/SCSI.h"/>
<build type="c-source" value="Lib/SCSI.c"/>
<build type="distribute" subtype="user-file" value="doxyfile"/>
<build type="distribute" subtype="user-file" value="BootloaderMassStorage.txt"/>
<require idref="lufa.common"/>
<require idref="lufa.platform"/>
<require idref="lufa.drivers.usb"/>
<require idref="lufa.drivers.board"/>
<require idref="lufa.drivers.board.leds"/>
</module>
</asf>

136
tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/makefile
View file

@ -1,68 +1,68 @@
#
# LUFA Library
# Copyright (C) Dean Camera, 2014.
#
# dean [at] fourwalledcubicle [dot] com
# www.lufa-lib.org
#
# --------------------------------------
# LUFA Project Makefile.
# --------------------------------------
# Run "make help" for target help.
MCU = at90usb1287
ARCH = AVR8
BOARD = USBKEY
F_CPU = 8000000
F_USB = $(F_CPU)
OPTIMIZATION = s
TARGET = BootloaderMassStorage
SRC = $(TARGET).c Descriptors.c BootloaderAPI.c BootloaderAPITable.S Lib/SCSI.c Lib/VirtualFAT.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
LUFA_PATH = ../../LUFA
CC_FLAGS = -DUSE_LUFA_CONFIG_HEADER -IConfig/ -DBOOT_START_ADDR=$(BOOT_START_OFFSET)
LD_FLAGS = -Wl,--section-start=.text=$(BOOT_START_OFFSET) $(BOOT_API_LD_FLAGS)
# Flash size and bootloader section sizes of the target, in KB. These must
# match the target's total FLASH size and the bootloader size set in the
# device's fuses.
FLASH_SIZE_KB = 128
BOOT_SECTION_SIZE_KB = 8
# Bootloader address calculation formulas
# Do not modify these macros, but rather modify the dependent values above.
CALC_ADDRESS_IN_HEX = $(shell printf "0x%X" $$(( $(1) )) )
BOOT_START_OFFSET = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) - $(BOOT_SECTION_SIZE_KB)) * 1024 )
BOOT_SEC_OFFSET = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) * 1024) - ($(strip $(1))) )
# Bootloader linker section flags for relocating the API table sections to
# known FLASH addresses - these should not normally be user-edited.
BOOT_SECTION_LD_FLAG = -Wl,--section-start=$(strip $(1))=$(call BOOT_SEC_OFFSET, $(3)) -Wl,--undefined=$(strip $(2))
BOOT_API_LD_FLAGS = $(call BOOT_SECTION_LD_FLAG, .apitable_trampolines, BootloaderAPI_Trampolines, 96)
BOOT_API_LD_FLAGS += $(call BOOT_SECTION_LD_FLAG, .apitable_jumptable, BootloaderAPI_JumpTable, 32)
BOOT_API_LD_FLAGS += $(call BOOT_SECTION_LD_FLAG, .apitable_signatures, BootloaderAPI_Signatures, 8)
# Check if the bootloader needs an AUX section, located before the real bootloader section to store some of the
# bootloader code. This is required for 32KB and smaller devices, where the actual bootloader is 6KB but the maximum
# bootloader section size is 4KB. The actual usable application space will be reduced by 6KB for these devices.
ifeq ($(BOOT_SECTION_SIZE_KB),8)
CC_FLAGS += -DAUX_BOOT_SECTION_SIZE=0
else
AUX_BOOT_SECTION_SIZE_KB = (6 - $(BOOT_SECTION_SIZE_KB))
CC_FLAGS += -DAUX_BOOT_SECTION_SIZE='($(AUX_BOOT_SECTION_SIZE_KB) * 1024)'
LD_FLAGS += -Wl,--section-start=.boot_aux=$(call BOOT_SEC_OFFSET, (($(BOOT_SECTION_SIZE_KB) + $(AUX_BOOT_SECTION_SIZE_KB)) * 1024 - 16))
LD_FLAGS += $(call BOOT_SECTION_LD_FLAG, .boot_aux_trampoline, Boot_AUX_Trampoline, ($(BOOT_SECTION_SIZE_KB) + $(AUX_BOOT_SECTION_SIZE_KB)) * 1024)
endif
# Default target
all:
# Include LUFA build script makefiles
include $(LUFA_PATH)/Build/lufa_core.mk
include $(LUFA_PATH)/Build/lufa_sources.mk
include $(LUFA_PATH)/Build/lufa_build.mk
include $(LUFA_PATH)/Build/lufa_cppcheck.mk
include $(LUFA_PATH)/Build/lufa_doxygen.mk
include $(LUFA_PATH)/Build/lufa_avrdude.mk
include $(LUFA_PATH)/Build/lufa_atprogram.mk
#
# LUFA Library
# Copyright (C) Dean Camera, 2014.
#
# dean [at] fourwalledcubicle [dot] com
# www.lufa-lib.org
#
# --------------------------------------
# LUFA Project Makefile.
# --------------------------------------
# Run "make help" for target help.
MCU = at90usb1287
ARCH = AVR8
BOARD = USBKEY
F_CPU = 8000000
F_USB = $(F_CPU)
OPTIMIZATION = s
TARGET = BootloaderMassStorage
SRC = $(TARGET).c Descriptors.c BootloaderAPI.c BootloaderAPITable.S Lib/SCSI.c Lib/VirtualFAT.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
LUFA_PATH = ../../LUFA
CC_FLAGS = -DUSE_LUFA_CONFIG_HEADER -IConfig/ -DBOOT_START_ADDR=$(BOOT_START_OFFSET)
LD_FLAGS = -Wl,--section-start=.text=$(BOOT_START_OFFSET) $(BOOT_API_LD_FLAGS)
# Flash size and bootloader section sizes of the target, in KB. These must
# match the target's total FLASH size and the bootloader size set in the
# device's fuses.
FLASH_SIZE_KB = 128
BOOT_SECTION_SIZE_KB = 8
# Bootloader address calculation formulas
# Do not modify these macros, but rather modify the dependent values above.
CALC_ADDRESS_IN_HEX = $(shell printf "0x%X" $$(( $(1) )) )
BOOT_START_OFFSET = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) - $(BOOT_SECTION_SIZE_KB)) * 1024 )
BOOT_SEC_OFFSET = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) * 1024) - ($(strip $(1))) )
# Bootloader linker section flags for relocating the API table sections to
# known FLASH addresses - these should not normally be user-edited.
BOOT_SECTION_LD_FLAG = -Wl,--section-start=$(strip $(1))=$(call BOOT_SEC_OFFSET, $(3)) -Wl,--undefined=$(strip $(2))
BOOT_API_LD_FLAGS = $(call BOOT_SECTION_LD_FLAG, .apitable_trampolines, BootloaderAPI_Trampolines, 96)
BOOT_API_LD_FLAGS += $(call BOOT_SECTION_LD_FLAG, .apitable_jumptable, BootloaderAPI_JumpTable, 32)
BOOT_API_LD_FLAGS += $(call BOOT_SECTION_LD_FLAG, .apitable_signatures, BootloaderAPI_Signatures, 8)
# Check if the bootloader needs an AUX section, located before the real bootloader section to store some of the
# bootloader code. This is required for 32KB and smaller devices, where the actual bootloader is 6KB but the maximum
# bootloader section size is 4KB. The actual usable application space will be reduced by 6KB for these devices.
ifeq ($(BOOT_SECTION_SIZE_KB),8)
CC_FLAGS += -DAUX_BOOT_SECTION_SIZE=0
else
AUX_BOOT_SECTION_SIZE_KB = (6 - $(BOOT_SECTION_SIZE_KB))
CC_FLAGS += -DAUX_BOOT_SECTION_SIZE='($(AUX_BOOT_SECTION_SIZE_KB) * 1024)'
LD_FLAGS += -Wl,--section-start=.boot_aux=$(call BOOT_SEC_OFFSET, (($(BOOT_SECTION_SIZE_KB) + $(AUX_BOOT_SECTION_SIZE_KB)) * 1024 - 16))
LD_FLAGS += $(call BOOT_SECTION_LD_FLAG, .boot_aux_trampoline, Boot_AUX_Trampoline, ($(BOOT_SECTION_SIZE_KB) + $(AUX_BOOT_SECTION_SIZE_KB)) * 1024)
endif
# Default target
all:
# Include LUFA build script makefiles
include $(LUFA_PATH)/Build/lufa_core.mk
include $(LUFA_PATH)/Build/lufa_sources.mk
include $(LUFA_PATH)/Build/lufa_build.mk
include $(LUFA_PATH)/Build/lufa_cppcheck.mk
include $(LUFA_PATH)/Build/lufa_doxygen.mk
include $(LUFA_PATH)/Build/lufa_avrdude.mk
include $(LUFA_PATH)/Build/lufa_atprogram.mk

182
tmk_core/protocol/lufa/LUFA-git/Bootloaders/Printer/BootloaderAPITable.S
View file

@ -1,91 +1,91 @@
/*
LUFA Library
Copyright (C) Dean Camera, 2014.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaims all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
; Trampolines to actual API implementations if the target address is outside the
; range of a rjmp instruction (can happen with large bootloader sections)
.section .apitable_trampolines, "ax"
.global BootloaderAPI_Trampolines
BootloaderAPI_Trampolines:
BootloaderAPI_ErasePage_Trampoline:
jmp BootloaderAPI_ErasePage
BootloaderAPI_WritePage_Trampoline:
jmp BootloaderAPI_WritePage
BootloaderAPI_FillWord_Trampoline:
jmp BootloaderAPI_FillWord
BootloaderAPI_ReadSignature_Trampoline:
jmp BootloaderAPI_ReadSignature
BootloaderAPI_ReadFuse_Trampoline:
jmp BootloaderAPI_ReadFuse
BootloaderAPI_ReadLock_Trampoline:
jmp BootloaderAPI_ReadLock
BootloaderAPI_WriteLock_Trampoline:
jmp BootloaderAPI_WriteLock
BootloaderAPI_UNUSED1:
ret
BootloaderAPI_UNUSED2:
ret
BootloaderAPI_UNUSED3:
ret
BootloaderAPI_UNUSED4:
ret
BootloaderAPI_UNUSED5:
ret
; API function jump table
.section .apitable_jumptable, "ax"
.global BootloaderAPI_JumpTable
BootloaderAPI_JumpTable:
rjmp BootloaderAPI_ErasePage_Trampoline
rjmp BootloaderAPI_WritePage_Trampoline
rjmp BootloaderAPI_FillWord_Trampoline
rjmp BootloaderAPI_ReadSignature_Trampoline
rjmp BootloaderAPI_ReadFuse_Trampoline
rjmp BootloaderAPI_ReadLock_Trampoline
rjmp BootloaderAPI_WriteLock_Trampoline
rjmp BootloaderAPI_UNUSED1 ; UNUSED ENTRY 1
rjmp BootloaderAPI_UNUSED2 ; UNUSED ENTRY 2
rjmp BootloaderAPI_UNUSED3 ; UNUSED ENTRY 3
rjmp BootloaderAPI_UNUSED4 ; UNUSED ENTRY 4
rjmp BootloaderAPI_UNUSED5 ; UNUSED ENTRY 5
; Bootloader table signatures and information
.section .apitable_signatures, "ax"
.global BootloaderAPI_Signatures
BootloaderAPI_Signatures:
.long BOOT_START_ADDR ; Start address of the bootloader
.word 0xDF20 ; Signature for the Printer class bootloader
.word 0xDCFB ; Signature for a LUFA class bootloader
/*
LUFA Library
Copyright (C) Dean Camera, 2014.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
Copyright 2014 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
permission notice and warranty disclaimer appear in supporting
documentation, and that the name of the author not be used in
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaims all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
whatsoever resulting from loss of use, data or profits, whether
in an action of contract, negligence or other tortious action,
arising out of or in connection with the use or performance of
this software.
*/
; Trampolines to actual API implementations if the target address is outside the
; range of a rjmp instruction (can happen with large bootloader sections)
.section .apitable_trampolines, "ax"
.global BootloaderAPI_Trampolines
BootloaderAPI_Trampolines:
BootloaderAPI_ErasePage_Trampoline:
jmp BootloaderAPI_ErasePage
BootloaderAPI_WritePage_Trampoline:
jmp BootloaderAPI_WritePage
BootloaderAPI_FillWord_Trampoline:
jmp BootloaderAPI_FillWord
BootloaderAPI_ReadSignature_Trampoline:
jmp BootloaderAPI_ReadSignature
BootloaderAPI_ReadFuse_Trampoline:
jmp BootloaderAPI_ReadFuse
BootloaderAPI_ReadLock_Trampoline:
jmp BootloaderAPI_ReadLock
BootloaderAPI_WriteLock_Trampoline:
jmp BootloaderAPI_WriteLock
BootloaderAPI_UNUSED1:
ret
BootloaderAPI_UNUSED2:
ret
BootloaderAPI_UNUSED3:
ret
BootloaderAPI_UNUSED4:
ret
BootloaderAPI_UNUSED5:
ret
; API function jump table
.section .apitable_jumptable, "ax"
.global BootloaderAPI_JumpTable
BootloaderAPI_JumpTable:
rjmp BootloaderAPI_ErasePage_Trampoline
rjmp BootloaderAPI_WritePage_Trampoline
rjmp BootloaderAPI_FillWord_Trampoline
rjmp BootloaderAPI_ReadSignature_Trampoline
rjmp BootloaderAPI_ReadFuse_Trampoline
rjmp BootloaderAPI_ReadLock_Trampoline
rjmp BootloaderAPI_WriteLock_Trampoline
rjmp BootloaderAPI_UNUSED1 ; UNUSED ENTRY 1
rjmp BootloaderAPI_UNUSED2 ; UNUSED ENTRY 2
rjmp BootloaderAPI_UNUSED3 ; UNUSED ENTRY 3
rjmp BootloaderAPI_UNUSED4 ; UNUSED ENTRY 4
rjmp BootloaderAPI_UNUSED5 ; UNUSED ENTRY 5
; Bootloader table signatures and information
.section .apitable_signatures, "ax"
.global BootloaderAPI_Signatures
BootloaderAPI_Signatures:
.long BOOT_START_ADDR ; Start address of the bootloader
.word 0xDF20 ; Signature for the Printer class bootloader
.word 0xDCFB ; Signature for a LUFA class bootloader

318
tmk_core/protocol/lufa/LUFA-git/Bootloaders/Printer/asf.xml
View file

@ -1,159 +1,159 @@
<asf xmlversion="1.0">
<project caption="Printer Bootloader - 128KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.128_4" force-caption="true" workspace-name="lufa_printer_128kb_4kb_">
<require idref="lufa.bootloaders.printer"/>
<require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/>
<device-support value="at90usb1287"/>
<config name="lufa.drivers.board.name" value="none"/>
<config name="config.compiler.optimization.level" value="size"/>
<build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/>
<build type="define" name="BOOT_START_ADDR" value="0x1F000"/>
<build type="linker-config" subtype="flags" value="--section-start=.text=0x1F000"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FFA0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FFE0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FFF8"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
</project>
<project caption="Printer Bootloader - 64KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.64_4" force-caption="true" workspace-name="lufa_printer_64kb_4kb_">
<require idref="lufa.bootloaders.printer"/>
<require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/>
<device-support value="at90usb647"/>
<config name="lufa.drivers.board.name" value="none"/>
<config name="config.compiler.optimization.level" value="size"/>
<build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/>
<build type="define" name="BOOT_START_ADDR" value="0xF000"/>
<build type="linker-config" subtype="flags" value="--section-start=.text=0xF000"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0xFFA0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0xFFE0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0xFFF8"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
</project>
<project caption="Printer Bootloader - 32KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.32_4" force-caption="true" workspace-name="lufa_printer_32kb_4kb_">
<require idref="lufa.bootloaders.printer"/>
<require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/>
<device-support value="atmega32u4"/>
<config name="lufa.drivers.board.name" value="none"/>
<config name="config.compiler.optimization.level" value="size"/>
<build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/>
<build type="define" name="BOOT_START_ADDR" value="0x7000"/>
<build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x7FA0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x7FE0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x7FF8"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
</project>
<project caption="Printer Bootloader - 16KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.16_4" force-caption="true" workspace-name="lufa_printer_16kb_4kb_">
<require idref="lufa.bootloaders.printer"/>
<require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/>
<device-support value="atmega16u2"/>
<config name="lufa.drivers.board.name" value="none"/>
<config name="config.compiler.optimization.level" value="size"/>
<build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/>
<build type="define" name="BOOT_START_ADDR" value="0x3000"/>
<build type="linker-config" subtype="flags" value="--section-start=.text=0x3000"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x3FA0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x3FE0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x3FF8"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
</project>
<project caption="Printer Bootloader - 8KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.8_4" force-caption="true" workspace-name="lufa_printer_8kb_4kb_">
<require idref="lufa.bootloaders.printer"/>
<require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/>
<device-support value="atmega8u2"/>
<config name="lufa.drivers.board.name" value="none"/>
<config name="config.compiler.optimization.level" value="size"/>
<build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/>
<build type="define" name="BOOT_START_ADDR" value="0x1000"/>
<build type="linker-config" subtype="flags" value="--section-start=.text=0x1000"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FA0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FE0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FF8"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
</project>
<module type="application" id="lufa.bootloaders.printer" caption="Printer Bootloader">
<info type="description" value="summary">
Printer Class Bootloader, capable of reprogramming a device by "printing" new HEX files to the virtual Plain-Text printer it creates when plugged into a host.
</info>
<info type="gui-flag" value="move-to-root"/>
<info type="keyword" value="Technology">
<keyword value="Bootloaders"/>
<keyword value="USB Device"/>
</info>
<device-support-alias value="lufa_avr8"/>
<device-support-alias value="lufa_xmega"/>
<device-support-alias value="lufa_uc3"/>
<build type="include-path" value="."/>
<build type="c-source" value="BootloaderPrinter.c"/>
<build type="header-file" value="BootloaderPrinter.h"/>
<build type="c-source" value="Descriptors.c"/>
<build type="header-file" value="Descriptors.h"/>
<build type="c-source" value="BootloaderAPI.c"/>
<build type="header-file" value="BootloaderAPI.h"/>
<build type="asm-source" value="BootloaderAPITable.S"/>
<build type="module-config" subtype="path" value="Config"/>
<build type="header-file" value="Config/LUFAConfig.h"/>
<build type="distribute" subtype="user-file" value="doxyfile"/>
<build type="distribute" subtype="user-file" value="BootloaderPrinter.txt"/>
<require idref="lufa.common"/>
<require idref="lufa.platform"/>
<require idref="lufa.drivers.usb"/>
<require idref="lufa.drivers.board"/>
<require idref="lufa.drivers.board.leds"/>
</module>
</asf>
<asf xmlversion="1.0">
<project caption="Printer Bootloader - 128KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.128_4" force-caption="true" workspace-name="lufa_printer_128kb_4kb_">
<require idref="lufa.bootloaders.printer"/>
<require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/>
<device-support value="at90usb1287"/>
<config name="lufa.drivers.board.name" value="none"/>
<config name="config.compiler.optimization.level" value="size"/>
<build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/>
<build type="define" name="BOOT_START_ADDR" value="0x1F000"/>
<build type="linker-config" subtype="flags" value="--section-start=.text=0x1F000"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FFA0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FFE0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FFF8"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
</project>
<project caption="Printer Bootloader - 64KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.64_4" force-caption="true" workspace-name="lufa_printer_64kb_4kb_">
<require idref="lufa.bootloaders.printer"/>
<require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/>
<device-support value="at90usb647"/>
<config name="lufa.drivers.board.name" value="none"/>
<config name="config.compiler.optimization.level" value="size"/>
<build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/>
<build type="define" name="BOOT_START_ADDR" value="0xF000"/>
<build type="linker-config" subtype="flags" value="--section-start=.text=0xF000"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0xFFA0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0xFFE0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0xFFF8"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
</project>
<project caption="Printer Bootloader - 32KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.32_4" force-caption="true" workspace-name="lufa_printer_32kb_4kb_">
<require idref="lufa.bootloaders.printer"/>
<require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/>
<device-support value="atmega32u4"/>
<config name="lufa.drivers.board.name" value="none"/>
<config name="config.compiler.optimization.level" value="size"/>
<build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/>
<build type="define" name="BOOT_START_ADDR" value="0x7000"/>
<build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x7FA0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x7FE0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x7FF8"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
</project>
<project caption="Printer Bootloader - 16KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.16_4" force-caption="true" workspace-name="lufa_printer_16kb_4kb_">
<require idref="lufa.bootloaders.printer"/>
<require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/>
<device-support value="atmega16u2"/>
<config name="lufa.drivers.board.name" value="none"/>
<config name="config.compiler.optimization.level" value="size"/>
<build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/>
<build type="define" name="BOOT_START_ADDR" value="0x3000"/>
<build type="linker-config" subtype="flags" value="--section-start=.text=0x3000"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x3FA0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x3FE0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x3FF8"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
</project>
<project caption="Printer Bootloader - 8KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.8_4" force-caption="true" workspace-name="lufa_printer_8kb_4kb_">
<require idref="lufa.bootloaders.printer"/>
<require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/>
<device-support value="atmega8u2"/>
<config name="lufa.drivers.board.name" value="none"/>
<config name="config.compiler.optimization.level" value="size"/>
<build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/>
<build type="define" name="BOOT_START_ADDR" value="0x1000"/>
<build type="linker-config" subtype="flags" value="--section-start=.text=0x1000"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FA0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FE0"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FF8"/>
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
</project>
<module type="application" id="lufa.bootloaders.printer" caption="Printer Bootloader">
<info type="description" value="summary">
Printer Class Bootloader, capable of reprogramming a device by "printing" new HEX files to the virtual Plain-Text printer it creates when plugged into a host.
</info>
<info type="gui-flag" value="move-to-root"/>
<info type="keyword" value="Technology">
<keyword value="Bootloaders"/>
<keyword value="USB Device"/>
</info>
<device-support-alias value="lufa_avr8"/>
<device-support-alias value="lufa_xmega"/>
<device-support-alias value="lufa_uc3"/>
<build type="include-path" value="."/>
<build type="c-source" value="BootloaderPrinter.c"/>
<build type="header-file" value="BootloaderPrinter.h"/>
<build type="c-source" value="Descriptors.c"/>
<build type="header-file" value="Descriptors.h"/>
<build type="c-source" value="BootloaderAPI.c"/>
<build type="header-file" value="BootloaderAPI.h"/>
<build type="asm-source" value="BootloaderAPITable.S"/>
<build type="module-config" subtype="path" value="Config"/>
<build type="header-file" value="Config/LUFAConfig.h"/>
<build type="distribute" subtype="user-file" value="doxyfile"/>
<build type="distribute" subtype="user-file" value="BootloaderPrinter.txt"/>
<require idref="lufa.common"/>
<require idref="lufa.platform"/>
<require idref="lufa.drivers.usb"/>
<require idref="lufa.drivers.board"/>
<require idref="lufa.drivers.board.leds"/>
</module>
</asf>

110
tmk_core/protocol/lufa/LUFA-git/Bootloaders/Printer/makefile
View file

@ -1,55 +1,55 @@
#
# LUFA Library
# Copyright (C) Dean Camera, 2014.
#
# dean [at] fourwalledcubicle [dot] com
# www.lufa-lib.org
#
# --------------------------------------
# LUFA Project Makefile.
# --------------------------------------
# Run "make help" for target help.
MCU = at90usb1287
ARCH = AVR8
BOARD = USBKEY
F_CPU = 8000000
F_USB = $(F_CPU)
OPTIMIZATION = s
TARGET = BootloaderPrinter
SRC = $(TARGET).c Descriptors.c BootloaderAPI.c BootloaderAPITable.S $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
LUFA_PATH = ../../LUFA
CC_FLAGS = -DUSE_LUFA_CONFIG_HEADER -IConfig/ -DBOOT_START_ADDR=$(BOOT_START_OFFSET)
LD_FLAGS = -Wl,--section-start=.text=$(BOOT_START_OFFSET) $(BOOT_API_LD_FLAGS)
# Flash size and bootloader section sizes of the target, in KB. These must
# match the target's total FLASH size and the bootloader size set in the
# device's fuses.
FLASH_SIZE_KB = 128
BOOT_SECTION_SIZE_KB = 8
# Bootloader address calculation formulas
# Do not modify these macros, but rather modify the dependent values above.
CALC_ADDRESS_IN_HEX = $(shell printf "0x%X" $$(( $(1) )) )
BOOT_START_OFFSET = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) - $(BOOT_SECTION_SIZE_KB)) * 1024 )
BOOT_SEC_OFFSET = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) * 1024) - ($(strip $(1))) )
# Bootloader linker section flags for relocating the API table sections to
# known FLASH addresses - these should not normally be user-edited.
BOOT_SECTION_LD_FLAG = -Wl,--section-start=$(strip $(1))=$(call BOOT_SEC_OFFSET, $(3)) -Wl,--undefined=$(strip $(2))
BOOT_API_LD_FLAGS = $(call BOOT_SECTION_LD_FLAG, .apitable_trampolines, BootloaderAPI_Trampolines, 96)
BOOT_API_LD_FLAGS += $(call BOOT_SECTION_LD_FLAG, .apitable_jumptable, BootloaderAPI_JumpTable, 32)
BOOT_API_LD_FLAGS += $(call BOOT_SECTION_LD_FLAG, .apitable_signatures, BootloaderAPI_Signatures, 8)
# Default target
all:
# Include LUFA build script makefiles
include $(LUFA_PATH)/Build/lufa_core.mk
include $(LUFA_PATH)/Build/lufa_sources.mk
include $(LUFA_PATH)/Build/lufa_build.mk
include $(LUFA_PATH)/Build/lufa_cppcheck.mk
include $(LUFA_PATH)/Build/lufa_doxygen.mk
include $(LUFA_PATH)/Build/lufa_avrdude.mk
include $(LUFA_PATH)/Build/lufa_atprogram.mk
#
# LUFA Library
# Copyright (C) Dean Camera, 2014.
#
# dean [at] fourwalledcubicle [dot] com
# www.lufa-lib.org
#
# --------------------------------------
# LUFA Project Makefile.
# --------------------------------------
# Run "make help" for target help.
MCU = at90usb1287
ARCH = AVR8
BOARD = USBKEY
F_CPU = 8000000
F_USB = $(F_CPU)
OPTIMIZATION = s
TARGET = BootloaderPrinter
SRC = $(TARGET).c Descriptors.c BootloaderAPI.c BootloaderAPITable.S $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
LUFA_PATH = ../../LUFA
CC_FLAGS = -DUSE_LUFA_CONFIG_HEADER -IConfig/ -DBOOT_START_ADDR=$(BOOT_START_OFFSET)
LD_FLAGS = -Wl,--section-start=.text=$(BOOT_START_OFFSET) $(BOOT_API_LD_FLAGS)
# Flash size and bootloader section sizes of the target, in KB. These must
# match the target's total FLASH size and the bootloader size set in the
# device's fuses.
FLASH_SIZE_KB = 128
BOOT_SECTION_SIZE_KB = 8
# Bootloader address calculation formulas
# Do not modify these macros, but rather modify the dependent values above.
CALC_ADDRESS_IN_HEX = $(shell printf "0x%X" $$(( $(1) )) )
BOOT_START_OFFSET = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) - $(BOOT_SECTION_SIZE_KB)) * 1024 )
BOOT_SEC_OFFSET = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) * 1024) - ($(strip $(1))) )
# Bootloader linker section flags for relocating the API table sections to
# known FLASH addresses - these should not normally be user-edited.
BOOT_SECTION_LD_FLAG = -Wl,--section-start=$(strip $(1))=$(call BOOT_SEC_OFFSET, $(3)) -Wl,--undefined=$(strip $(2))
BOOT_API_LD_FLAGS = $(call BOOT_SECTION_LD_FLAG, .apitable_trampolines, BootloaderAPI_Trampolines, 96)
BOOT_API_LD_FLAGS += $(call BOOT_SECTION_LD_FLAG, .apitable_jumptable, BootloaderAPI_JumpTable, 32)
BOOT_API_LD_FLAGS += $(call BOOT_SECTION_LD_FLAG, .apitable_signatures, BootloaderAPI_Signatures, 8)
# Default target
all:
# Include LUFA build script makefiles
include $(LUFA_PATH)/Build/lufa_core.mk
include $(LUFA_PATH)/Build/lufa_sources.mk
include $(LUFA_PATH)/Build/lufa_build.mk
include $(LUFA_PATH)/Build/lufa_cppcheck.mk
include $(LUFA_PATH)/Build/lufa_doxygen.mk
include $(LUFA_PATH)/Build/lufa_avrdude.mk
include $(LUFA_PATH)/Build/lufa_atprogram.mk

84
tmk_core/protocol/lufa/LUFA-git/LUFA/Build/HID_EEPROM_Loader/makefile
View file

@ -1,42 +1,42 @@
#
# LUFA Library
# Copyright (C) Dean Camera, 2014.
#
# dean [at] fourwalledcubicle [dot] com
# www.lufa-lib.org
#
# --------------------------------------
# LUFA Project Makefile.
# --------------------------------------
# Run "make help" for target help.
MCU = at90usb1287
ARCH = AVR8
F_CPU = 1000000
F_USB = $(F_CPU)
OPTIMIZATION = s
TARGET = HID_EEPROM_Loader
SRC = $(TARGET).c
LUFA_PATH = ../../../LUFA
CC_FLAGS =
LD_FLAGS =
OBJECT_FILES = InputEEData.o
# Default target
all:
# Determine the AVR sub-architecture of the build main application object file
FIND_AVR_SUBARCH = avr$(shell avr-objdump -f $(TARGET).o | grep architecture | cut -d':' -f3 | cut -d',' -f1)
# Create a linkable object file with the input binary EEPROM data stored in the FLASH section
InputEEData.o: InputEEData.bin $(TARGET).o $(MAKEFILE_LIST)
@echo $(MSG_OBJCPY_CMD) Converting \"$<\" to a object file \"$@\"
avr-objcopy -I binary -O elf32-avr -B $(call FIND_AVR_SUBARCH) --rename-section .data=.progmem.data,contents,alloc,readonly,data $< $@
# Include LUFA build script makefiles
include $(LUFA_PATH)/Build/lufa_core.mk
include $(LUFA_PATH)/Build/lufa_build.mk
include $(LUFA_PATH)/Build/lufa_cppcheck.mk
include $(LUFA_PATH)/Build/lufa_doxygen.mk
include $(LUFA_PATH)/Build/lufa_hid.mk
#
# LUFA Library
# Copyright (C) Dean Camera, 2014.
#
# dean [at] fourwalledcubicle [dot] com
# www.lufa-lib.org
#
# --------------------------------------
# LUFA Project Makefile.
# --------------------------------------
# Run "make help" for target help.
MCU = at90usb1287
ARCH = AVR8
F_CPU = 1000000
F_USB = $(F_CPU)
OPTIMIZATION = s
TARGET = HID_EEPROM_Loader
SRC = $(TARGET).c
LUFA_PATH = ../../../LUFA
CC_FLAGS =
LD_FLAGS =
OBJECT_FILES = InputEEData.o
# Default target
all:
# Determine the AVR sub-architecture of the build main application object file
FIND_AVR_SUBARCH = avr$(shell avr-objdump -f $(TARGET).o | grep architecture | cut -d':' -f3 | cut -d',' -f1)
# Create a linkable object file with the input binary EEPROM data stored in the FLASH section
InputEEData.o: InputEEData.bin $(TARGET).o $(MAKEFILE_LIST)
@echo $(MSG_OBJCPY_CMD) Converting \"$<\" to a object file \"$@\"
avr-objcopy -I binary -O elf32-avr -B $(call FIND_AVR_SUBARCH) --rename-section .data=.progmem.data,contents,alloc,readonly,data $< $@
# Include LUFA build script makefiles
include $(LUFA_PATH)/Build/lufa_core.mk
include $(LUFA_PATH)/Build/lufa_build.mk
include $(LUFA_PATH)/Build/lufa_cppcheck.mk
include $(LUFA_PATH)/Build/lufa_doxygen.mk
include $(LUFA_PATH)/Build/lufa_hid.mk

110
tmk_core/protocol/lufa/LUFA-git/LUFA/CodeTemplates/DeviceTemplate/asf.xml
View file

@ -1,55 +1,55 @@
<asf xmlversion="1.0">
<project caption="USB Device Template" id="lufa.templates.device.project.avr8">
<require idref="lufa.templates.device"/>
<require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8_template"/>
<device-support value="at90usb1287"/>
<config name="lufa.drivers.board.name" value="usbkey"/>
<build type="define" name="F_CPU" value="8000000UL"/>
<build type="define" name="F_USB" value="8000000UL"/>
</project>
<project caption="USB Device Template" id="lufa.templates.device.project.xmega">
<require idref="lufa.templates.device"/>
<require idref="lufa.boards.dummy.xmega"/>
<generator value="as5_8_template"/>
<device-support value="atxmega256a3bu"/>
<config name="lufa.drivers.board.name" value="a3bu_xplained"/>
<build type="define" name="F_CPU" value="32000000UL"/>
<build type="define" name="F_USB" value="48000000UL"/>
</project>
<module type="application" id="lufa.templates.device" caption="USB Device Template">
<info type="description" value="summary">
Template for a LUFA USB device mode application.
</info>
<info type="gui-flag" value="move-to-root"/>
<info type="keyword" value="Technology">
<keyword value="USB Device"/>
<keyword value="Template Projects"/>
</info>
<device-support-alias value="lufa_avr8"/>
<device-support-alias value="lufa_xmega"/>
<device-support-alias value="lufa_uc3"/>
<build type="c-source" value="DeviceApplication.c"/>
<build type="c-source" value="Descriptors.c"/>
<build type="header-file" value="DeviceApplication.h"/>
<build type="header-file" value="Descriptors.h"/>
<build type="module-config" subtype="path" value=".."/>
<build type="header-file" value="../LUFAConfig.h"/>
<require idref="lufa.common"/>
<require idref="lufa.platform"/>
<require idref="lufa.drivers.usb"/>
<require idref="lufa.drivers.board"/>
</module>
</asf>
<asf xmlversion="1.0">
<project caption="USB Device Template" id="lufa.templates.device.project.avr8">
<require idref="lufa.templates.device"/>
<require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8_template"/>
<device-support value="at90usb1287"/>
<config name="lufa.drivers.board.name" value="usbkey"/>
<build type="define" name="F_CPU" value="8000000UL"/>
<build type="define" name="F_USB" value="8000000UL"/>
</project>
<project caption="USB Device Template" id="lufa.templates.device.project.xmega">
<require idref="lufa.templates.device"/>
<require idref="lufa.boards.dummy.xmega"/>
<generator value="as5_8_template"/>
<device-support value="atxmega256a3bu"/>
<config name="lufa.drivers.board.name" value="a3bu_xplained"/>
<build type="define" name="F_CPU" value="32000000UL"/>
<build type="define" name="F_USB" value="48000000UL"/>
</project>
<module type="application" id="lufa.templates.device" caption="USB Device Template">
<info type="description" value="summary">
Template for a LUFA USB device mode application.
</info>
<info type="gui-flag" value="move-to-root"/>
<info type="keyword" value="Technology">
<keyword value="USB Device"/>
<keyword value="Template Projects"/>
</info>
<device-support-alias value="lufa_avr8"/>
<device-support-alias value="lufa_xmega"/>
<device-support-alias value="lufa_uc3"/>
<build type="c-source" value="DeviceApplication.c"/>
<build type="c-source" value="Descriptors.c"/>
<build type="header-file" value="DeviceApplication.h"/>
<build type="header-file" value="Descriptors.h"/>
<build type="module-config" subtype="path" value=".."/>
<build type="header-file" value="../LUFAConfig.h"/>
<require idref="lufa.common"/>
<require idref="lufa.platform"/>
<require idref="lufa.drivers.usb"/>
<require idref="lufa.drivers.board"/>
</module>
</asf>

82
tmk_core/protocol/lufa/LUFA-git/LUFA/CodeTemplates/HostTemplate/asf.xml
View file

@ -1,41 +1,41 @@
<asf xmlversion="1.0">
<project caption="USB Host Template" id="lufa.templates.host.project">
<require idref="lufa.templates.host"/>
<require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8_template"/>
<device-support value="at90usb1287"/>
<config name="lufa.drivers.board.name" value="usbkey"/>
<build type="define" name="F_CPU" value="8000000UL"/>
<build type="define" name="F_USB" value="8000000UL"/>
</project>
<module type="application" id="lufa.templates.host" caption="USB Host Template">
<info type="description" value="summary">
Template for a LUFA USB host mode application.
</info>
<info type="gui-flag" value="move-to-root"/>
<info type="keyword" value="Technology">
<keyword value="USB Host"/>
<keyword value="Template Projects"/>
</info>
<device-support-alias value="lufa_avr8"/>
<device-support-alias value="lufa_xmega"/>
<device-support-alias value="lufa_uc3"/>
<build type="c-source" value="HostApplication.c"/>
<build type="header-file" value="HostApplication.h"/>
<build type="module-config" subtype="path" value=".."/>
<build type="header-file" value="../LUFAConfig.h"/>
<require idref="lufa.common"/>
<require idref="lufa.platform"/>
<require idref="lufa.drivers.usb"/>
<require idref="lufa.drivers.board"/>
</module>
</asf>
<asf xmlversion="1.0">
<project caption="USB Host Template" id="lufa.templates.host.project">
<require idref="lufa.templates.host"/>
<require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8_template"/>
<device-support value="at90usb1287"/>
<config name="lufa.drivers.board.name" value="usbkey"/>
<build type="define" name="F_CPU" value="8000000UL"/>
<build type="define" name="F_USB" value="8000000UL"/>
</project>
<module type="application" id="lufa.templates.host" caption="USB Host Template">
<info type="description" value="summary">
Template for a LUFA USB host mode application.
</info>
<info type="gui-flag" value="move-to-root"/>
<info type="keyword" value="Technology">
<keyword value="USB Host"/>
<keyword value="Template Projects"/>
</info>
<device-support-alias value="lufa_avr8"/>
<device-support-alias value="lufa_xmega"/>
<device-support-alias value="lufa_uc3"/>
<build type="c-source" value="HostApplication.c"/>
<build type="header-file" value="HostApplication.h"/>
<build type="module-config" subtype="path" value=".."/>
<build type="header-file" value="../LUFAConfig.h"/>
<require idref="lufa.common"/>
<require idref="lufa.platform"/>
<require idref="lufa.drivers.usb"/>
<require idref="lufa.drivers.board"/>
</module>
</asf>

1950
tmk_core/protocol/lufa/LUFA-git/LUFA/DoxygenPages/BuildSystem.txt
View file

File diff suppressed because it is too large Load diff