[Keyboard] Add Southpad Keyboard (#13964)

Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Ryan <fauxpark@gmail.com>
2024-11-19 03:36:28 +00:00 · 2021-08-13 11:29:59 -07:00 · 2021-08-13 11:29:59 -07:00 · f00e56eb0b
commit f00e56eb0b
parent 8392729d74
7 changed files with 266 additions and 0 deletions
--- a/keyboards/matchstickworks/southpad/config.h
+++ b/keyboards/matchstickworks/southpad/config.h
@ -0,0 +1,100 @@
+/*
+Copyright 2021 Logan Butler
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    MatchstickWorks
+#define PRODUCT         SouthPad
+
+/* key matrix size */
+#define MATRIX_ROWS 6
+#define MATRIX_COLS 4
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { B3, B5, B6, B7, C7, C6 }
+#define MATRIX_COL_PINS { B0, B1, B2, B4 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/* Bootmagic Lite key configuration */
+// #define BOOTMAGIC_LITE_ROW 0
+// #define BOOTMAGIC_LITE_COLUMN 0
--- a/keyboards/matchstickworks/southpad/info.json
+++ b/keyboards/matchstickworks/southpad/info.json
@ -0,0 +1,34 @@
+{
+    "keyboard_name": "SouthPad",
+    "url": "",
+    "maintainer": "MatchstickWorks",
+    "width": 4,
+    "height": 6,
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                {"label":"K00 (B3,B0)", "x":0, "y":0},
+                {"label":"K01 (B3,B1)", "x":1, "y":0},
+                {"label":"K02 (B3,B2)", "x":2, "y":0},
+                {"label":"K03 (B3,B4)", "x":3, "y":0},
+                {"label":"K10 (B5,B0)", "x":0, "y":1},
+                {"label":"K11 (B5,B1)", "x":1, "y":1},
+                {"label":"K12 (B5,B2)", "x":2, "y":1},
+                {"label":"K13 (B5,B4)", "x":3, "y":1},
+                {"label":"K30 (B7,B0)", "x":0, "y":2, "h":2},
+                {"label":"K21 (B6,B1)", "x":1, "y":2},
+                {"label":"K22 (B6,B2)", "x":2, "y":2},
+                {"label":"K23 (B6,B4)", "x":3, "y":2},
+                {"label":"K31 (B7,B1)", "x":1, "y":3},
+                {"label":"K32 (B7,B2)", "x":2, "y":3},
+                {"label":"K33 (B7,B4)", "x":3, "y":3},
+                {"label":"K50 (C6,B0)", "x":0, "y":4, "h":2},
+                {"label":"K41 (C7,B1)", "x":1, "y":4},
+                {"label":"K42 (C7,B2)", "x":2, "y":4},
+                {"label":"K43 (C7,B4)", "x":3, "y":4},
+                {"label":"K51 (C6,B1)", "x":1, "y":5},
+                {"label":"K53 (C6,B4)", "x":2, "y":5, "w":2}
+            ]
+        }
+    }
+}
--- a/keyboards/matchstickworks/southpad/keymaps/default/keymap.c
+++ b/keyboards/matchstickworks/southpad/keymaps/default/keymap.c
@ -0,0 +1,27 @@
+/* Copyright 2021 Logan Butler
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [0] = LAYOUT_numpad_6x4_southpaw( /* Base */
+				KC_BSPC, KC_EQL, KC_LPRN, KC_RPRN, 
+				KC_PMNS, KC_PAST, KC_PSLS, KC_NLCK, 
+					KC_P9, KC_P8, KC_P7, 
+				KC_PPLS, KC_P6, KC_P5, KC_P4, 
+					KC_P3, KC_P2, KC_P1, 
+				KC_PENT, KC_PDOT, KC_P0
+  ),
+};
--- a/keyboards/matchstickworks/southpad/readme.md
+++ b/keyboards/matchstickworks/southpad/readme.md
@ -0,0 +1,23 @@
+# SouthPad
+
+![Southpad](https://i.imgur.com/Wl71thnh.jpg)
+
+This is a left-handed (or mirrored) numberpad with USB-C connections.
+
+Default layout is such:
+
+![SouthPad Layout](https://i.imgur.com/jc7T2jl.jpg)
+
+* Keyboard Maintainer: [Logan Butler](https://github.com/MatchstickWorks)
+* Hardware Supported: SouthPad PCB
+* Hardware Availability: Either via [my Etsy Store](https://www.etsy.com/shop/MatchstickWorksShop) or by messaging directly
+
+Getting the board into bootloader mode:
+
+In order to flash the firmware to this board, simply press the Reset button on the back of the PCB. You should head a USB disconnect and reconnect sound shortly following.
+
+Make example for this keyboard (after setting up your build environment):
+
+    make matchstickworks/southpad:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
--- a/keyboards/matchstickworks/southpad/rules.mk
+++ b/keyboards/matchstickworks/southpad/rules.mk
@ -0,0 +1,22 @@
+# MCU name
+MCU = atmega32u2
+
+# Bootloader selection
+BOOTLOADER = bootloadHID
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes       # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+BLUETOOTH_ENABLE = no       # Enable Bluetooth
+AUDIO_ENABLE = no           # Audio output
--- a/keyboards/matchstickworks/southpad/southpad.c
+++ b/keyboards/matchstickworks/southpad/southpad.c
@ -0,0 +1,16 @@
+/* Copyright 2021 Logan Butler
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "southpad.h"
--- a/keyboards/matchstickworks/southpad/southpad.h
+++ b/keyboards/matchstickworks/southpad/southpad.h
@ -0,0 +1,44 @@
+/* Copyright 2021 Logan Butler
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT_numpad_6x4_southpaw( \
+				k00, k01, k02, k03, \
+				k10, k11, k12, k13, \
+					k21, k22, k23, \
+				k20, k31, k32, k33, \
+					k41, k42, k43, \
+				k40, k51,   k53  \
+) \
+{ \
+	{ k00,   k01, k02,   k03 },     \
+	{ k10,   k11, k12,   k13 },     \
+	{ k20,   k21, k22,   k23 },     \
+	{ KC_NO, k31, k32,   k33 },     \
+	{ k40,   k41, k42,   k43 },     \
+	{ KC_NO, k51, KC_NO, k53 }      \
+}
+