diff --git a/keyboards/melody96/config.h b/keyboards/melody96/config.h
new file mode 100644
index 00000000000..6083dcf751c
--- /dev/null
+++ b/keyboards/melody96/config.h
@@ -0,0 +1,58 @@
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    YMDK
+#define PRODUCT         Melody96
+#define DESCRIPTION     Melody96
+
+/* key matrix size */
+#define MATRIX_ROWS 12
+#define MATRIX_COLS 9
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { B7, B3, B2, B1, B0, E6, F0, F1, F4, F5, F6, F7 }
+#define MATRIX_COL_PINS { D0, D1, D2, D3, D5, D4, D6, D7, B4 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION ROW2COL
+
+/* number of backlight levels */
+#define BACKLIGHT_PIN B6
+#ifdef BACKLIGHT_PIN
+#define BACKLIGHT_LEVELS 5
+#endif
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* prevent stuck modifiers */
+#define PREVENT_STUCK_MODIFIERS
+
+#define RGB_DI_PIN E2
+#ifdef RGB_DI_PIN
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 18
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+#endif
+
+#endif
diff --git a/keyboards/melody96/keymaps/default/keymap.c b/keyboards/melody96/keymaps/default/keymap.c
new file mode 100644
index 00000000000..85b12ced11e
--- /dev/null
+++ b/keyboards/melody96/keymaps/default/keymap.c
@@ -0,0 +1,70 @@
+#include QMK_KEYBOARD_H
+
+#define _______ KC_TRNS
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	LAYOUT(
+    KC_ESC,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_PSCR, KC_HOME, KC_END,  KC_PGUP, KC_PGDN, KC_DEL,
+    KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_BSPC, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
+    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,          KC_P7,   KC_P8,   KC_P9,   KC_PMNS,
+    KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,                    KC_P4,   KC_P5,   KC_P6,   KC_PPLS,
+    KC_LSFT, KC_NUBS, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,          KC_UP,   KC_P1,   KC_P2,   KC_P3,   KC_PENT,
+    KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                             KC_RALT, MO(1),   MO(1),   KC_LEFT, KC_DOWN, KC_RGHT, KC_P0,   KC_PDOT, KC_PENT),
+
+	LAYOUT(
+    RESET,   _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MUTE, KC_VOLD, KC_VOLU, _______, _______, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+    _______, RGB_TOG, _______, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______,          _______, _______, _______, _______,
+    BL_TOGG, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,                   _______, _______, _______, _______,
+    _______, _______, _______, _______, BL_DEC,  BL_TOGG, BL_INC,  _______, _______, _______, _______, _______, _______,          _______, _______, _______, _______, _______,
+    _______, _______, _______,                            _______,                            _______, _______, _______, _______, _______, _______, _______, _______, _______),
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+	return MACRO_NONE;
+}
+
+void matrix_init_user(void) {
+}
+
+void matrix_scan_user(void) {
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+	return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+	if (usb_led & (1 << USB_LED_NUM_LOCK)) {
+		DDRC |= (1 << 6); PORTC &= ~(1 << 6);
+	} else {
+		DDRC &= ~(1 << 6); PORTC &= ~(1 << 6);
+	}
+
+	if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+		DDRC |= (1 << 7); PORTC &= ~(1 << 7);
+	} else {
+		DDRC &= ~(1 << 7); PORTC &= ~(1 << 7);
+	}
+
+	if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
+		DDRB |= (1 << 5); PORTB &= ~(1 << 5);
+	} else {
+		DDRB &= ~(1 << 5); PORTB &= ~(1 << 5);
+	}
+
+	if (usb_led & (1 << USB_LED_COMPOSE)) {
+
+	} else {
+
+	}
+
+	if (usb_led & (1 << USB_LED_KANA)) {
+
+	} else {
+
+	}
+
+}
diff --git a/keyboards/melody96/melody96.c b/keyboards/melody96/melody96.c
new file mode 100644
index 00000000000..44e813586bf
--- /dev/null
+++ b/keyboards/melody96/melody96.c
@@ -0,0 +1 @@
+#include "melody96.h"
diff --git a/keyboards/melody96/melody96.h b/keyboards/melody96/melody96.h
new file mode 100644
index 00000000000..f60f054caee
--- /dev/null
+++ b/keyboards/melody96/melody96.h
@@ -0,0 +1,28 @@
+#ifndef MELODY96_H
+#define MELODY96_H
+
+#include "quantum.h"
+
+#define LAYOUT( \
+  K050, K051, K052, K053, K054, K055, K056, K057, K058, K118, K117, K115, K114, K113, K116, K112, K111, K110, K063, \
+  K040, K041, K042, K043, K044, K045, K046, K047, K048, K108, K107, K105, K104, K103, K106, K102, K101, K100, K064, \
+  K030, K031, K032, K033, K034, K035, K036, K037, K038, K098, K097, K095, K094, K084,       K096, K092, K091, K090, \
+  K020, K021, K022, K023, K024, K025, K026, K027, K028, K088, K087, K085, K093,             K086, K082, K081, K080, \
+  K010, K011, K012, K013, K014, K015, K016, K017, K018, K078, K077, K075, K074,       K073, K076, K072, K071, K070, \
+  K000, K001, K002,                   K006,                   K008, K007, K005, K004, K003, K066, K062, K061, K060  \
+) { \
+	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008 }, \
+	{ K010,  K011,  K012,  K013,  K014,  K015,  K016,  K017,  K018 }, \
+	{ K020,  K021,  K022,  K023,  K024,  K025,  K026,  K027,  K028 }, \
+	{ K030,  K031,  K032,  K033,  K034,  K035,  K036,  K037,  K038 }, \
+	{ K040,  K041,  K042,  K043,  K044,  K045,  K046,  K047,  K048 }, \
+	{ K050,  K051,  K052,  K053,  K054,  K055,  K056,  K057,  K058 }, \
+	{ K060,  K061,  K062,  K063,  K064,  KC_NO, K066,  KC_NO, KC_NO }, \
+	{ K070,  K071,  K072,  K073,  K074,  K075,  K076,  K077,  K078 }, \
+	{ K080,  K081,  K082,  KC_NO, K084,  K085,  K086,  K087,  K088 }, \
+	{ K090,  K091,  K092,  K093,  K094,  K095,  K096,  K097,  K098 }, \
+	{ K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108 }, \
+	{ K110,  K111,  K112,  K113,  K114,  K115,  K116,  K117,  K118 }  \
+}
+
+#endif
diff --git a/keyboards/melody96/readme.md b/keyboards/melody96/readme.md
new file mode 100644
index 00000000000..b43398dd358
--- /dev/null
+++ b/keyboards/melody96/readme.md
@@ -0,0 +1,15 @@
+# YMDK Melody96
+
+![melody96](https://i.imgur.com/9o0a6XF.png)
+
+96-key Keyboard from YMDK
+
+Keyboard Maintainer: [superuser41](https://github.com/kaylanm)  
+Hardware Supported: melody96  
+Hardware Availability: [YMDK, group buy closed](https://geekhack.org/index.php?topic=93614.0)  
+
+Make example for this keyboard (after setting up your build environment):
+
+    make melody96:default
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
diff --git a/keyboards/melody96/rules.mk b/keyboards/melody96/rules.mk
new file mode 100644
index 00000000000..be0f84b1702
--- /dev/null
+++ b/keyboards/melody96/rules.mk
@@ -0,0 +1,57 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+BOOTLOADER = atmel-dfu
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE = no	# Console for debug(+400)
+COMMAND_ENABLE = no    # Commands for debug and configuration
+SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
+AUDIO_ENABLE = no
+RGBLIGHT_ENABLE = yes