diff --git a/keyboards/nullbitsco/nibble/README.md b/keyboards/nullbitsco/nibble/README.md
new file mode 100644
index 00000000000..92825847d6d
--- /dev/null
+++ b/keyboards/nullbitsco/nibble/README.md
@@ -0,0 +1,19 @@
+# NIBBLE
+
+![NIBBLE](https://nullbits.co/static/img/nibble1.jpg)
+
+A unique, tweakable 65% keyboard kit built by nullbits. [More info at nullbits.co](https://nullbits.co/nibble/)
+
+* Keyboard Maintainer: [Jay Greco](https://github.com/jaygreco)
+* Hardware Supported: NIBBLE Rev1, Pro Micro comaptible MCUs.
+* Hardware Availability: [nullbits.co](https://nullbits.co/)
+
+Note: If you are seeing issues with MacOS and keyboard hangs after sleep, make sure `NO_USB_STARTUP_CHECK = yes` is set in your rules.mk.
+
+Adds experimental "Remote Keyboard" functionality, which forwards keystrokes from an external macropad, keyboard, or numpad over UART/TRRS, removing the need for an additional USB connection. 
+
+Make example for this keyboard (after setting up your build environment):
+
+    make nullbitsco/nibble:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/nullbitsco/nibble/big_led.c b/keyboards/nullbitsco/nibble/big_led.c
new file mode 100644
index 00000000000..eb0d0a50714
--- /dev/null
+++ b/keyboards/nullbitsco/nibble/big_led.c
@@ -0,0 +1,67 @@
+/* Copyright 2020 Jay Greco
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "big_led.h"
+
+void set_big_LED_r(uint8_t mode) {
+    switch(mode) {
+        case LED_ON:
+            setPinOutput(BIG_LED_R_PIN);
+            writePin(BIG_LED_R_PIN, GPIO_STATE_HIGH);
+        break;
+
+        case LED_OFF:
+            setPinOutput(BIG_LED_R_PIN);
+            writePin(BIG_LED_R_PIN, GPIO_STATE_LOW);
+        break;
+
+        default:
+        break;
+    }
+}
+
+void set_big_LED_g(uint8_t mode) {
+    switch(mode) {
+        case LED_ON:
+            setPinOutput(BIG_LED_G_PIN);
+            writePin(BIG_LED_G_PIN, GPIO_STATE_HIGH);
+        break;
+
+        case LED_OFF:
+            setPinOutput(BIG_LED_G_PIN);
+            writePin(BIG_LED_G_PIN, GPIO_STATE_LOW);
+        break;
+
+        default:
+        break;
+    }
+}
+
+void set_big_LED_b(uint8_t mode) {
+    switch(mode) {
+        case LED_ON:
+            setPinOutput(BIG_LED_B_PIN);
+            writePin(BIG_LED_B_PIN, GPIO_STATE_HIGH);
+        break;
+
+        case LED_OFF:
+            setPinOutput(BIG_LED_B_PIN);
+            writePin(BIG_LED_B_PIN, GPIO_STATE_LOW);
+        break;
+
+        default:
+        break;
+    }
+}
\ No newline at end of file
diff --git a/keyboards/nullbitsco/nibble/big_led.h b/keyboards/nullbitsco/nibble/big_led.h
new file mode 100644
index 00000000000..113aaaf1067
--- /dev/null
+++ b/keyboards/nullbitsco/nibble/big_led.h
@@ -0,0 +1,34 @@
+/* Copyright 2020 Jay Greco
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h" 
+
+/* Optional big LED pins */
+#define BIG_LED_R_PIN D7
+#define BIG_LED_G_PIN C6
+#define BIG_LED_B_PIN D0
+
+#define LED_ON          2
+#define LED_OFF         0
+
+#define GPIO_STATE_LOW  0
+#define GPIO_STATE_HIGH 1
+
+void
+  set_big_LED_r(uint8_t mode),
+  set_big_LED_g(uint8_t mode),
+  set_big_LED_b(uint8_t mode);
\ No newline at end of file
diff --git a/keyboards/nullbitsco/nibble/bitc_led.c b/keyboards/nullbitsco/nibble/bitc_led.c
new file mode 100644
index 00000000000..60ffeea2789
--- /dev/null
+++ b/keyboards/nullbitsco/nibble/bitc_led.c
@@ -0,0 +1,37 @@
+/* Copyright 2020 Jay Greco
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "bitc_led.h"
+
+void set_bitc_LED(uint8_t mode) {
+    switch(mode) {
+        case LED_ON:
+            setPinOutput(PIN_LED);
+            writePin(PIN_LED, GPIO_STATE_HIGH);
+        break;
+
+        case LED_DIM:
+            setPinInput(PIN_LED);
+        break;
+
+        case LED_OFF:
+            setPinOutput(PIN_LED);
+            writePin(PIN_LED, GPIO_STATE_LOW);
+        break;
+
+        default:
+        break;
+    }
+}
\ No newline at end of file
diff --git a/keyboards/nullbitsco/nibble/bitc_led.h b/keyboards/nullbitsco/nibble/bitc_led.h
new file mode 100644
index 00000000000..b3552a7d198
--- /dev/null
+++ b/keyboards/nullbitsco/nibble/bitc_led.h
@@ -0,0 +1,29 @@
+/* Copyright 2020 Jay Greco
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+#define LED_ON          2
+#define LED_DIM         1
+#define LED_OFF         0
+
+#define GPIO_STATE_LOW  0
+#define GPIO_STATE_HIGH 1
+
+#define PIN_LED         F0
+
+void set_bitc_LED(uint8_t mode);
\ No newline at end of file
diff --git a/keyboards/nullbitsco/nibble/config.h b/keyboards/nullbitsco/nibble/config.h
new file mode 100644
index 00000000000..3e0adce454a
--- /dev/null
+++ b/keyboards/nullbitsco/nibble/config.h
@@ -0,0 +1,61 @@
+/* Copyright 2020 Jay Greco
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "config_common.h"
+
+/* Used to set host for remote KB if VUSB detect doesn't work. */
+// #define KEYBOARD_HOST // Force host mode
+// #define KEYBOARD_REMOTE // Force remote mode
+
+// Workaround for freezing after MacOS sleep
+#define NO_USB_STARTUP_CHECK
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0x6E61
+#define PRODUCT_ID      0x6060
+
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    nullbits
+#define PRODUCT         NIBBLE
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 16
+#define MATRIX_MUX_COLS 4
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 10
+
+/*
+ * Keyboard Matrix Assignments
+ * The nibble uses a demultiplexer for the cols.
+ * to free up more IOs for awesomeness!
+ * See matrix.c for more details.
+*/
+#define MATRIX_ROW_PINS { B1, B3, B2, B6, D4 }
+#define MATRIX_COL_MUX_PINS { F4, F5, F6, F7 }
+#define MATRIX_COL_PINS { }
+
+/* Optional SMT LED pins */
+#define RGB_DI_PIN E6
+#define RGBLED_NUM 10
+#define RGBLIGHT_ANIMATIONS
+#define RGBLIGHT_SLEEP
+
+/* Optional encoder pins */
+#define ENCODERS_PAD_A { B5 }
+#define ENCODERS_PAD_B { B4 }
\ No newline at end of file
diff --git a/keyboards/nullbitsco/nibble/keymaps/default/keymap.c b/keyboards/nullbitsco/nibble/keymaps/default/keymap.c
new file mode 100644
index 00000000000..6d453e7067b
--- /dev/null
+++ b/keyboards/nullbitsco/nibble/keymaps/default/keymap.c
@@ -0,0 +1,128 @@
+/* Copyright 2020 Jay Greco
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+#define _MA 0
+#define _FN 1
+
+enum custom_keycodes {
+  KC_CUST = SAFE_RANGE,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_MA] = LAYOUT_ansi(
+            KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_TILD,
+    KC_F13, KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,
+    KC_F14, KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,  KC_PGUP,
+    KC_F15, KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,          KC_UP,   KC_PGDN,
+    KC_F16, KC_LCTL, KC_LGUI, KC_LALT,                   KC_SPC,                    MO(_FN), KC_RALT, KC_RCTL, KC_LEFT,          KC_DOWN, KC_RGHT
+  ),
+  [_FN] = LAYOUT_ansi(
+               RESET,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,  KC_F10,  KC_F11,  KC_F12, KC_HOME,  KC_INS,
+    RGB_TOG, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______,
+    _______, _______, _______, _______,                   _______,                   _______, _______, _______, _______,          _______, _______
+  ),
+
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  // Send keystrokes to host keyboard, if connected (see readme)
+  process_record_remote_kb(keycode, record);
+  switch(keycode) {
+    case KC_CUST: //custom macro
+      if (record->event.pressed) {
+      }
+    break;
+
+    case RM_1: //remote macro 1
+      if (record->event.pressed) {
+      }
+    break;
+
+    case RM_2: //remote macro 2
+      if (record->event.pressed) {
+      }
+    break;
+
+    case RM_3: //remote macro 3
+      if (record->event.pressed) {
+      }
+    break;
+
+    case RM_4: //remote macro 4
+      if (record->event.pressed) {
+      }
+    break;
+    
+  }
+return true;
+}
+
+// RGB config, for changing RGB settings on non-VIA firmwares
+void change_RGB(bool clockwise) {
+    bool shift = get_mods() & MOD_MASK_SHIFT;
+    bool alt = get_mods() & MOD_MASK_ALT;
+    bool ctrl = get_mods() & MOD_MASK_CTRL;
+
+    if (clockwise) {
+        if (alt) {
+            rgblight_increase_hue();
+        } else if (ctrl) {
+            rgblight_increase_val();
+        } else if (shift) {
+            rgblight_increase_sat();
+        } else {
+            rgblight_step();
+        }
+
+  } else {
+      if (alt) {
+            rgblight_decrease_hue();
+        } else if (ctrl) {
+            rgblight_decrease_val();
+        } else if (shift) {
+            rgblight_decrease_sat();
+        } else {
+            rgblight_step_reverse();
+        }
+    } 
+}
+
+void encoder_update_kb(uint8_t index, bool clockwise) {
+  if (layer_state_is(1)) {
+    //change RGB settings
+    change_RGB(clockwise);
+  }
+  else {
+    if (clockwise) {
+      tap_code(KC_VOLU);
+  } else {
+      tap_code(KC_VOLD);
+    }  
+  }
+}
+
+void matrix_init_user(void) {
+  // Initialize remote keyboard, if connected (see readme)
+  matrix_init_remote_kb();
+}
+
+void matrix_scan_user(void) {
+  // Scan and parse keystrokes from remote keyboard, if connected (see readme)
+  matrix_scan_remote_kb();
+}
\ No newline at end of file
diff --git a/keyboards/nullbitsco/nibble/keymaps/iso/keymap.c b/keyboards/nullbitsco/nibble/keymaps/iso/keymap.c
new file mode 100644
index 00000000000..46f246d6ee7
--- /dev/null
+++ b/keyboards/nullbitsco/nibble/keymaps/iso/keymap.c
@@ -0,0 +1,128 @@
+/* Copyright 2020 Jay Greco
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+#define _MA 0
+#define _FN 1
+
+enum custom_keycodes {
+  KC_CUST = SAFE_RANGE,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_MA] = LAYOUT_iso(
+             KC_ESC,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_TILD,
+    KC_F13,  KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC,          KC_DEL,
+    KC_F14,  KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT,  KC_PGUP,
+    KC_F15,  KC_LSFT, KC_NUBS, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_UP,   KC_PGDN,
+    KC_F16,  KC_LCTL, KC_LGUI, KC_LALT,                            KC_SPC,                    MO(_FN), KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
+  ),
+  [_FN] = LAYOUT_iso(
+               RESET,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,  KC_F10,  KC_F11,  KC_F12, KC_HOME,  KC_INS,
+    RGB_TOG, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+    _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+    _______, _______, _______, _______,                            _______,                   _______, _______, _______, _______, _______, _______
+  ),
+
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  // Send keystrokes to host keyboard, if connected (see readme)
+  process_record_remote_kb(keycode, record);
+  switch(keycode) {
+    case KC_CUST: //custom macro
+      if (record->event.pressed) {
+      }
+    break;
+
+    case RM_1: //remote macro 1
+      if (record->event.pressed) {
+      }
+    break;
+
+    case RM_2: //remote macro 2
+      if (record->event.pressed) {
+      }
+    break;
+
+    case RM_3: //remote macro 3
+      if (record->event.pressed) {
+      }
+    break;
+
+    case RM_4: //remote macro 4
+      if (record->event.pressed) {
+      }
+    break;
+    
+  }
+return true;
+}
+
+// RGB config, for changing RGB settings on non-VIA firmwares
+void change_RGB(bool clockwise) {
+    bool shift = get_mods() & MOD_MASK_SHIFT;
+    bool alt = get_mods() & MOD_MASK_ALT;
+    bool ctrl = get_mods() & MOD_MASK_CTRL;
+
+    if (clockwise) {
+        if (alt) {
+            rgblight_increase_hue();
+        } else if (ctrl) {
+            rgblight_increase_val();
+        } else if (shift) {
+            rgblight_increase_sat();
+        } else {
+            rgblight_step();
+        }
+
+  } else {
+      if (alt) {
+            rgblight_decrease_hue();
+        } else if (ctrl) {
+            rgblight_decrease_val();
+        } else if (shift) {
+            rgblight_decrease_sat();
+        } else {
+            rgblight_step_reverse();
+        }
+    } 
+}
+
+void encoder_update_kb(uint8_t index, bool clockwise) {
+  if (layer_state_is(1)) {
+    //change RGB settings
+    change_RGB(clockwise);
+  }
+  else {
+    if (clockwise) {
+      tap_code(KC_VOLU);
+  } else {
+      tap_code(KC_VOLD);
+    }  
+  }
+}
+
+void matrix_init_user(void) {
+  // Initialize remote keyboard, if connected (see readme)
+  matrix_init_remote_kb();
+}
+
+void matrix_scan_user(void) {
+  // Scan and parse keystrokes from remote keyboard, if connected (see readme)
+  matrix_scan_remote_kb();
+}
\ No newline at end of file
diff --git a/keyboards/nullbitsco/nibble/keymaps/via/config.h b/keyboards/nullbitsco/nibble/keymaps/via/config.h
new file mode 100644
index 00000000000..961e2aed1ac
--- /dev/null
+++ b/keyboards/nullbitsco/nibble/keymaps/via/config.h
@@ -0,0 +1,21 @@
+/* Copyright 2020 Jay Greco
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+// Custom config starts after VIA's EEPROM usage,
+// dynamic keymaps start after this.
+// Custom config Usage:
+// 1 for enabled encoder modes (1 byte)
+// 6 for 3x custom encoder settings, left, right, and press (18 bytes)
+#define VIA_EEPROM_CUSTOM_CONFIG_SIZE 19
\ No newline at end of file
diff --git a/keyboards/nullbitsco/nibble/keymaps/via/keymap.c b/keyboards/nullbitsco/nibble/keymaps/via/keymap.c
new file mode 100644
index 00000000000..1e1b0c03694
--- /dev/null
+++ b/keyboards/nullbitsco/nibble/keymaps/via/keymap.c
@@ -0,0 +1,164 @@
+/* Copyright 2020 Jay Greco
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+#include "via_extras.h"
+
+#define _BASE     0
+#define _VIA1     1
+#define _VIA2     2
+#define _VIA3     3
+
+#define KC_DISC_MUTE KC_F23
+#define KC_DISC_DEAF KC_F24
+#define NUM_CUST_KEYCODES (_NUM_CUST_KCS - SAFE_RANGE)
+#define VIA_KEYCODE_RANGE 0x5F80
+
+enum custom_keycodes {
+  PROG = SAFE_RANGE,
+  DISC_MUTE,
+  DISC_DEAF,
+  SUPER_ALT_TAB,
+  _NUM_CUST_KCS,
+};
+
+// Macro variables
+bool is_alt_tab_active = false;
+uint16_t alt_tab_timer = 0;
+bool muted = false;
+bool deafened = false;
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [_BASE] = LAYOUT_all(
+    KC_NUBS,   KC_GESC, KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, KC_HOME,
+    KC_F13,    KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,
+    KC_F14,    KC_CAPS, KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT,          KC_ENT,  KC_PGUP,
+    KC_F15,    KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT,          KC_UP,   KC_PGDN,
+    KC_F16,    KC_LCTL, KC_LGUI, KC_LALT,                   KC_SPC,                  MO(_VIA1), KC_RALT, KC_RCTL, KC_LEFT,          KC_DOWN, KC_RGHT
+  ),
+
+  [_VIA1] = LAYOUT_all(
+    _______,  RESET,   KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,  KC_F10,  KC_F11,  KC_F12, KC_HOME,  KC_INS,
+    RGB_TOG,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+    _______,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______,
+    _______,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______,
+    _______,  _______, _______, _______,                   _______,                   _______, _______, _______, KC_MPRV,          KC_MPLY, KC_MNXT
+  ),
+
+  [_VIA2] = LAYOUT_all(
+    _______,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+    _______,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+    _______,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______,
+    _______,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______,
+    _______,  _______, _______, _______,                   _______,                   _______, _______, _______, _______,          _______, _______
+  ),
+
+  [_VIA3] = LAYOUT_all(
+    _______,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+    _______,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+    _______,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______,
+    _______,  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______,
+    _______,  _______, _______, _______,                   _______,                   _______, _______, _______, _______,          _______, _______
+  ),
+
+};
+
+void map_via_keycode(uint16_t * keycode) {
+  if (abs(*keycode - VIA_KEYCODE_RANGE) < NUM_CUST_KEYCODES) { //make into macro?
+    dprintf("VIA custom keycode found, mapping to QMK keycode.\n");
+    uint16_t new_keycode = (*keycode - VIA_KEYCODE_RANGE) + SAFE_RANGE;
+    dprintf("VIA KC: %u QMK KC: %u\n", *keycode, new_keycode);
+    *keycode = new_keycode;
+  }
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  map_via_keycode(&keycode);
+  // Send keystrokes to host keyboard, if connected (see readme)
+  process_record_remote_kb(keycode, record);
+  switch(keycode) {
+    case PROG:
+      if (record->event.pressed) {
+        rgblight_disable_noeeprom();
+        bootloader_jump();
+      }
+    break;
+
+    case DISC_MUTE:
+      if (record->event.pressed) {
+        tap_code(KC_DISC_MUTE);
+        if (!rgblight_is_enabled()) break;
+        
+        if (muted) {
+          rgblight_enable_noeeprom();
+        } else {
+          rgblight_timer_disable();
+          uint8_t val = rgblight_get_val();
+          rgblight_sethsv_range(255, 255, val, 0, 1);
+        }
+        muted = !muted;
+      }
+    break;
+
+    case DISC_DEAF:
+      if (record->event.pressed) {
+        tap_code(KC_DISC_DEAF);
+        if (!rgblight_is_enabled()) break;
+
+        if (deafened) {
+          rgblight_enable_noeeprom();
+        } else {
+          rgblight_timer_disable();
+          uint8_t val = rgblight_get_val();
+          rgblight_sethsv_range(255, 255, val, 0, RGBLED_NUM-1);
+        }
+        deafened = !deafened;
+      }
+    break;
+
+    case SUPER_ALT_TAB:
+      if (record->event.pressed) {
+        if (!is_alt_tab_active) {
+          is_alt_tab_active = true;
+          register_code(KC_LALT);
+        } 
+        alt_tab_timer = timer_read();
+        register_code(KC_TAB);
+      } else {
+        unregister_code(KC_TAB);
+      }
+      break;
+
+    default:
+    break;    
+  }
+return true;
+}
+
+void matrix_init_user(void) {
+  // Initialize remote keyboard, if connected (see readme)
+  matrix_init_remote_kb();
+}
+
+void matrix_scan_user(void) {
+  // Scan and parse keystrokes from remote keyboard, if connected (see readme)
+  matrix_scan_remote_kb();
+  if (is_alt_tab_active) {
+    if (timer_elapsed(alt_tab_timer) > 1000) {
+      unregister_code(KC_LALT);
+      is_alt_tab_active = false;
+    }
+  }
+}
\ No newline at end of file
diff --git a/keyboards/nullbitsco/nibble/keymaps/via/nibble_encoder.c b/keyboards/nullbitsco/nibble/keymaps/via/nibble_encoder.c
new file mode 100644
index 00000000000..bdea1869c2e
--- /dev/null
+++ b/keyboards/nullbitsco/nibble/keymaps/via/nibble_encoder.c
@@ -0,0 +1,133 @@
+/* Copyright 2020 Jay Greco
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "nibble_encoder.h"
+
+uint8_t encoder_value = 0x20,
+  encoder_mode = ENC_MODE_VOLUME,
+  enabled_encoder_modes = 0x1F;
+
+uint16_t retrieve_custom_encoder_config(uint8_t encoder_idx, uint8_t behavior) {
+#ifdef DYNAMIC_KEYMAP_ENABLE
+    void* addr = (void*)(EEPROM_CUSTOM_ENCODER + (encoder_idx * 6) + (behavior * 2));
+    uint16_t keycode = eeprom_read_byte(addr) << 8;
+    keycode |= eeprom_read_byte(addr + 1);
+    return keycode;
+#else
+    return 0;
+#endif
+}
+
+void set_custom_encoder_config(uint8_t encoder_idx, uint8_t behavior, uint16_t new_code) {
+#ifdef DYNAMIC_KEYMAP_ENABLE
+    void* addr = (void*)(EEPROM_CUSTOM_ENCODER + (encoder_idx * 6) + (behavior * 2));
+    eeprom_update_byte(addr, (uint8_t)(new_code >> 8));
+    eeprom_update_byte(addr + 1, (uint8_t)(new_code & 0xFF));
+#endif
+}
+
+void pre_encoder_mode_change(void) {
+	dprintf("Changing encoder mode: %u\n", encoder_mode);
+}
+
+void post_encoder_mode_change(void) {
+	dprintf("Encoder mode: %u\n", encoder_mode);
+}
+
+//???
+void change_encoder_mode(bool clockwise) {
+  pre_encoder_mode_change();
+  if(enabled_encoder_modes == 0){
+    enabled_encoder_modes = 0x1F;
+  }
+  do {
+    if(!clockwise){
+      if (encoder_mode == 0){
+        encoder_mode = _NUM_ENCODER_MODES - 1;
+      } else{
+        encoder_mode = encoder_mode - 1;
+      }
+    } else {
+        encoder_mode = (encoder_mode + 1) % _NUM_ENCODER_MODES;
+    }
+  } while(((1 << encoder_mode) & enabled_encoder_modes) == 0);
+  post_encoder_mode_change();
+}
+
+uint16_t handle_encoder_cw(void) {
+	dprintf("Encoder mode: %u\n", encoder_mode);
+  uint16_t mapped_code = 0;
+  switch(encoder_mode){
+    default:
+    	break;
+    case ENC_MODE_VOLUME:
+      mapped_code = KC_VOLU;
+      break;
+    case ENC_MODE_MEDIA:
+      mapped_code = KC_MEDIA_NEXT_TRACK;
+      break;
+    case ENC_MODE_SCROLL:
+      mapped_code = KC_WH_D;
+      break;
+    case ENC_MODE_BACKLIGHT:
+      mapped_code = RGB_VAI;
+      break;
+#ifdef DYNAMIC_KEYMAP_ENABLE
+    case ENC_MODE_CUSTOM0:
+      mapped_code = retrieve_custom_encoder_config(0, ENC_CUSTOM_CW);
+      break;
+    case ENC_MODE_CUSTOM1:
+      mapped_code = retrieve_custom_encoder_config(1, ENC_CUSTOM_CW);
+      break;
+    case ENC_MODE_CUSTOM2:
+      mapped_code = retrieve_custom_encoder_config(2, ENC_CUSTOM_CW);
+      break;
+#endif
+  }
+  return mapped_code;
+}
+
+uint16_t handle_encoder_ccw(void) {
+	dprintf("Encoder mode: %u\n", encoder_mode);
+  uint16_t mapped_code = 0;
+  switch(encoder_mode){
+    default:
+    	break;
+    case ENC_MODE_VOLUME:
+      mapped_code = KC_VOLD;
+      break;
+    case ENC_MODE_MEDIA:
+      mapped_code = KC_MEDIA_PREV_TRACK;
+      break;
+    case ENC_MODE_SCROLL:
+      mapped_code = KC_WH_U;
+      break;
+    case ENC_MODE_BACKLIGHT:
+      mapped_code = RGB_VAD;
+      break;
+#ifdef DYNAMIC_KEYMAP_ENABLE
+    case ENC_MODE_CUSTOM0:
+      mapped_code = retrieve_custom_encoder_config(0, ENC_CUSTOM_CCW);
+      break;
+    case ENC_MODE_CUSTOM1:
+      mapped_code = retrieve_custom_encoder_config(1, ENC_CUSTOM_CCW);
+      break;
+    case ENC_MODE_CUSTOM2:
+      mapped_code = retrieve_custom_encoder_config(2, ENC_CUSTOM_CCW);
+      break;
+#endif
+  }
+  return mapped_code;
+}
diff --git a/keyboards/nullbitsco/nibble/keymaps/via/nibble_encoder.h b/keyboards/nullbitsco/nibble/keymaps/via/nibble_encoder.h
new file mode 100644
index 00000000000..fc1e61434bf
--- /dev/null
+++ b/keyboards/nullbitsco/nibble/keymaps/via/nibble_encoder.h
@@ -0,0 +1,50 @@
+/* Copyright 2020 Jay Greco
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include QMK_KEYBOARD_H
+#include "eeprom.h"
+
+#define EEPROM_ENABLED_ENCODER_MODES (VIA_EEPROM_CUSTOM_CONFIG_ADDR)
+#define EEPROM_CUSTOM_ENCODER (VIA_EEPROM_CUSTOM_CONFIG_ADDR+1)
+
+enum encoder_modes {
+  ENC_MODE_VOLUME,
+  ENC_MODE_MEDIA,
+  ENC_MODE_SCROLL,
+  ENC_MODE_BRIGHTNESS,
+  ENC_MODE_BACKLIGHT,
+  ENC_MODE_CUSTOM0,
+  ENC_MODE_CUSTOM1,
+  ENC_MODE_CUSTOM2,
+  _NUM_ENCODER_MODES,
+};
+
+enum custom_encoder_behavior {
+    ENC_CUSTOM_CW = 0,
+    ENC_CUSTOM_CCW,
+    ENC_CUSTOM_PRESS
+};
+
+uint16_t 
+  retrieve_custom_encoder_config(uint8_t encoder_idx, uint8_t behavior),
+  handle_encoder_cw(void),
+  handle_encoder_ccw(void);
+
+void set_custom_encoder_config(uint8_t encoder_idx, uint8_t behavior, uint16_t new_code),
+  pre_encoder_mode_change(void),
+  post_encoder_mode_change(void),
+  change_encoder_mode(bool clockwise);
\ No newline at end of file
diff --git a/keyboards/nullbitsco/nibble/keymaps/via/rules.mk b/keyboards/nullbitsco/nibble/keymaps/via/rules.mk
new file mode 100644
index 00000000000..ee197efc022
--- /dev/null
+++ b/keyboards/nullbitsco/nibble/keymaps/via/rules.mk
@@ -0,0 +1,4 @@
+VIA_ENABLE = yes
+
+SRC += keymaps/via/nibble_encoder.c
+SRC += keymaps/via/via_extras.c
\ No newline at end of file
diff --git a/keyboards/nullbitsco/nibble/keymaps/via/via_extras.c b/keyboards/nullbitsco/nibble/keymaps/via/via_extras.c
new file mode 100644
index 00000000000..067296b76b5
--- /dev/null
+++ b/keyboards/nullbitsco/nibble/keymaps/via/via_extras.c
@@ -0,0 +1,129 @@
+/* Copyright 2020 Jay Greco
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "via_extras.h"
+
+// Encoder Behavior
+extern uint8_t encoder_value;
+extern uint8_t encoder_mode;
+extern uint8_t enabled_encoder_modes;
+
+void raw_hid_receive_kb( uint8_t *data, uint8_t length )
+{
+  uint8_t *command_id = &(data[0]);
+  uint8_t *command_data = &(data[1]);
+  dprintf("raw hid recv! command_id: %u\n",*command_id);
+  switch ( *command_id )
+  {
+    case id_get_keyboard_value:
+    {
+      switch( command_data[0])
+      {
+        case id_encoder_modes:
+        {
+          command_data[1] = enabled_encoder_modes;
+          dprintf("[read] enabled_encoder_modes: %u\n", enabled_encoder_modes);
+        }
+        break;
+
+        case id_encoder_custom:
+        {
+          uint8_t custom_encoder_idx = command_data[1];
+          uint16_t keycode = retrieve_custom_encoder_config(custom_encoder_idx, ENC_CUSTOM_CW);
+          command_data[2] =  keycode >> 8;
+          command_data[3] = keycode & 0xFF;
+          keycode = retrieve_custom_encoder_config(custom_encoder_idx, ENC_CUSTOM_CCW);
+          command_data[4] =  keycode >> 8;
+          command_data[5] = keycode & 0xFF;
+          keycode = retrieve_custom_encoder_config(custom_encoder_idx, ENC_CUSTOM_PRESS);
+          command_data[6] =  keycode >> 8;
+          command_data[7] = keycode & 0xFF;
+        }
+        break;
+
+        default:
+        {
+          *command_id = id_unhandled;
+        }
+        break;
+      }
+    }
+    break;
+    case id_set_keyboard_value:
+    {
+      switch(command_data[0]){
+        case id_encoder_modes:
+        {
+          enabled_encoder_modes = command_data[1];
+          dprintf("[write] enabled_encoder_modes: %u\n", enabled_encoder_modes);
+          eeprom_update_byte((uint8_t*)EEPROM_ENABLED_ENCODER_MODES, enabled_encoder_modes);
+        }
+        break;
+
+        case id_encoder_custom:
+        {
+          uint8_t custom_encoder_idx = command_data[1];
+          uint8_t encoder_behavior = command_data[2];
+          uint16_t keycode = (command_data[3] << 8) | command_data[4];
+          set_custom_encoder_config(custom_encoder_idx, encoder_behavior, keycode);
+        }
+        break;
+
+        default:
+        {
+          *command_id = id_unhandled;
+        }
+        break;
+      }
+    }
+    break;
+
+    default:
+    {
+      // Unhandled message.
+      *command_id = id_unhandled;
+    }
+    break;
+  }
+}
+
+void encoder_update_kb(uint8_t index, bool clockwise) {
+  if (layer_state_is(1)) {
+    change_encoder_mode(clockwise);
+    return;
+  }
+  uint16_t mapped_code = 0;
+  if (clockwise) {
+    mapped_code = handle_encoder_cw();
+  } else {
+    mapped_code = handle_encoder_ccw();
+  }
+  if(mapped_code != 0){
+    tap_code16(mapped_code);
+  }
+}
+
+void custom_config_load(void){
+#ifdef DYNAMIC_KEYMAP_ENABLE
+  enabled_encoder_modes = eeprom_read_byte((uint8_t*)EEPROM_ENABLED_ENCODER_MODES);
+#endif
+}
+
+void via_init_kb(void)
+{
+  dprintf("VIA is enabled.\n");
+  custom_config_load();
+}
diff --git a/keyboards/nullbitsco/nibble/keymaps/via/via_extras.h b/keyboards/nullbitsco/nibble/keymaps/via/via_extras.h
new file mode 100644
index 00000000000..83c3c131281
--- /dev/null
+++ b/keyboards/nullbitsco/nibble/keymaps/via/via_extras.h
@@ -0,0 +1,39 @@
+/* Copyright 2020 Jay Greco
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "nibble_encoder.h"
+#include "via.h"
+#include "raw_hid.h"
+#include "dynamic_keymap.h"
+#include "tmk_core/common/eeprom.h"
+
+enum nibble_keyboard_value_id {
+  id_encoder_modes = 0x80,
+  id_unused_mode_1,
+  id_encoder_custom,
+  id_unused_mode_2
+};
+
+// Encoder Behavior
+extern uint8_t encoder_value,
+  encoder_mode,
+  enabled_encoder_modes;
+
+void raw_hid_receive_kb(uint8_t *data, uint8_t length),
+  encoder_update_kb(uint8_t index, bool clockwise),
+  custom_config_load(void),
+  via_init_kb(void);
\ No newline at end of file
diff --git a/keyboards/nullbitsco/nibble/matrix.c b/keyboards/nullbitsco/nibble/matrix.c
new file mode 100644
index 00000000000..8ec9da2844c
--- /dev/null
+++ b/keyboards/nullbitsco/nibble/matrix.c
@@ -0,0 +1,95 @@
+/* Copyright 2020 Jay Greco
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "quantum.h"
+
+#define COL_SHIFTER ((uint32_t)1)
+
+// Column pins
+static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS;
+static const uint8_t col_pins[MATRIX_MUX_COLS] = MATRIX_COL_MUX_PINS;
+
+// Internal functions
+
+static void init_pins(void) {
+    // Set cols to outputs, low
+    for (uint8_t pin = 0; pin < MATRIX_MUX_COLS; pin++) {
+        setPinOutput(col_pins[pin]);
+    }
+    
+    // Unselect cols
+    for (uint8_t bit = 0; bit < MATRIX_MUX_COLS; bit++) {
+        writePinLow(col_pins[bit]);
+    }
+
+    // Set rows to input, pullup
+    for (uint8_t pin = 0; pin < MATRIX_ROWS; pin++) {
+        setPinInputHigh(row_pins[pin]);
+    }
+}
+
+static void select_col(uint8_t col)
+{
+    for (uint8_t bit = 0; bit < MATRIX_MUX_COLS; bit++) {
+        uint8_t state = (col & (0b1 << bit)) >> bit;
+        writePin(col_pins[bit], state);
+    }
+}
+
+static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col)
+{
+    bool matrix_changed = false;
+    select_col(current_col);
+    wait_us(5);
+
+    // Read each row sequentially
+    for(uint8_t row_index = 0; row_index < MATRIX_ROWS; row_index++)
+    {
+        matrix_row_t last_row_value = current_matrix[row_index];
+
+        if (!readPin(row_pins[row_index]))
+        {
+            current_matrix[row_index] |= (COL_SHIFTER << current_col);
+        }
+        else
+        {
+            current_matrix[row_index] &= ~(COL_SHIFTER << current_col);
+        }
+
+        if ((last_row_value != current_matrix[row_index]) && !(matrix_changed))
+        {
+            matrix_changed = true;
+        }
+    }
+
+    return matrix_changed;
+}
+
+// Matrix scan functions
+
+void matrix_init_custom(void) {
+    init_pins();
+}
+
+bool matrix_scan_custom(matrix_row_t current_matrix[]) {
+    bool changed = false;
+
+    //Set col, read rows
+    for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) {
+        changed |= read_rows_on_col(current_matrix, current_col);
+    }
+    
+    return (uint8_t)changed;
+}
\ No newline at end of file
diff --git a/keyboards/nullbitsco/nibble/nibble.c b/keyboards/nullbitsco/nibble/nibble.c
new file mode 100644
index 00000000000..409edd44a01
--- /dev/null
+++ b/keyboards/nullbitsco/nibble/nibble.c
@@ -0,0 +1,26 @@
+/* Copyright 2020 Jay Greco
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+#include "bitc_led.h"
+
+// Use Bit-C LED to show CAPS LOCK status
+bool led_update_kb(led_t led_state) {
+    bool res = led_update_user(led_state);
+    if (res) {
+        set_bitc_LED(led_state.caps_lock ? LED_DIM : LED_OFF);
+    }
+    return res;
+}
diff --git a/keyboards/nullbitsco/nibble/nibble.h b/keyboards/nullbitsco/nibble/nibble.h
new file mode 100644
index 00000000000..9744ae745c0
--- /dev/null
+++ b/keyboards/nullbitsco/nibble/nibble.h
@@ -0,0 +1,63 @@
+/* Copyright 2020 Jay Greco
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#define ___ KC_NO
+
+#include "quantum.h"
+#include "remote_kb.h"
+
+#define LAYOUT_all( \
+    K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G, \
+    K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, K1G, \
+    K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D,      K2F, K2G, \
+    K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D,      K3F, K3G, \
+    K41, K42, K43, K44,           K47,           K4A, K4B, K4C, K4D,      K4F, K4G  \
+) { \
+   {K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G}, \
+   {K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, K1G}, \
+   {K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, ___, K2F, K2G}, \
+   {K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, ___, K3F, K3G}, \
+   {K41, K42, K43, K44, ___, ___, K47, ___, ___, K4A, K4B, K4C, K4D, ___, K4F, K4G}, \
+}
+
+#define LAYOUT_ansi( \
+         K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G, \
+    K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, K1G, \
+    K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D,      K2F, K2G, \
+    K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D,      K3F, K3G, \
+    K41, K42, K43, K44,           K47,           K4A, K4B, K4C, K4D,      K4F, K4G  \
+) { \
+   {___, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G}, \
+   {K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, K1G}, \
+   {K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, ___, K2F, K2G}, \
+   {K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, ___, K3F, K3G}, \
+   {K41, K42, K43, K44, ___, ___, K47, ___, ___, K4A, K4B, K4C, K4D, ___, K4F, K4G}, \
+}
+
+#define LAYOUT_iso( \
+         K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G, \
+    K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E,      K1G, \
+    K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K1F, K2F, K2G, \
+    K31, K32, K01, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3F, K3G, \
+    K41, K42, K43, K44,           K47,           K4A, K4B, K4C, K4D,      K4F, K4G  \
+) { \
+   {K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G}, \
+   {K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, K1G}, \
+   {K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, ___, K2F, K2G}, \
+   {K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, ___, K3F, K3G}, \
+   {K41, K42, K43, K44, ___, ___, K47, ___, ___, K4A, K4B, K4C, K4D, ___, K4F, K4G}, \
+}
diff --git a/keyboards/nullbitsco/nibble/remote_kb.c b/keyboards/nullbitsco/nibble/remote_kb.c
new file mode 100644
index 00000000000..2e36f5f22e7
--- /dev/null
+++ b/keyboards/nullbitsco/nibble/remote_kb.c
@@ -0,0 +1,177 @@
+/* Copyright 2020 Jay Greco
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/*
+Remote keyboard is an experimental feature that allows for connecting another
+keyboard, macropad, numpad, or accessory without requiring an additional USB connection.
+The "remote keyboard" forwards its keystrokes using UART serial over TRRS. Dynamic VUSB 
+detect allows the keyboard automatically switch to host or remote mode depending on
+which is connected to the USB port.
+
+Possible functionality includes the ability to send data from the host to the remote using
+a reverse link, allowing for LED sync, configuration, and more data sharing between devices.
+This will require a new communication protocol, as the current one is limited.
+*/
+
+#include "remote_kb.h"
+
+uint8_t
+ msg[UART_MSG_LEN],
+ msg_idx = 0;
+
+bool
+ is_host = true;
+
+// Private functions
+
+static bool vbus_detect(void) {
+  #if defined(__AVR_ATmega32U4__)
+    //returns true if VBUS is present, false otherwise.
+    USBCON |= (1 << OTGPADE); //enables VBUS pad
+    _delay_us(10);
+    return (USBSTA & (1<<VBUS));  //checks state of VBUS
+  #else
+    #error vbus_detect is not implemented for this architecure!
+  #endif
+}
+
+static uint8_t chksum8(const unsigned char *buf, size_t len) {
+  unsigned int sum;
+  for (sum = 0 ; len != 0 ; len--)
+    sum += *(buf++);
+  return (uint8_t)sum;
+}
+
+static void send_msg(uint16_t keycode, bool pressed) {
+  msg[IDX_PREAMBLE] = UART_PREAMBLE;
+  msg[IDX_KCLSB] = (keycode & 0xFF);
+  msg[IDX_KCMSB] = (keycode >> 8) & 0xFF;
+  msg[IDX_PRESSED] = pressed;
+  msg[IDX_CHECKSUM] = chksum8(msg, UART_MSG_LEN-1);
+
+  for (int i=0; i<UART_MSG_LEN; i++) {
+    uart_putchar(msg[i]);
+  }
+}
+
+static void print_message_buffer(void) {
+  for (int i=0; i<UART_MSG_LEN; i++) {
+    dprintf("msg[%u]: %u\n", i, msg[i]);
+  }
+}
+
+static void process_uart(void) {
+  uint8_t chksum = chksum8(msg, UART_MSG_LEN-1);
+  if (msg[IDX_PREAMBLE] != UART_PREAMBLE || msg[IDX_CHECKSUM] != chksum) {
+     dprintf("UART checksum mismatch!\n");
+     print_message_buffer();
+     dprintf("calc checksum: %u\n", chksum);
+  } else {
+    uint16_t keycode = (uint16_t)msg[IDX_KCLSB] | ((uint16_t)msg[IDX_KCMSB] << 8);
+    bool pressed = (bool)msg[IDX_PRESSED];
+    if (IS_RM_KC(keycode)) {
+      keyrecord_t record;
+      record.event.pressed = pressed;
+      if (pressed) dprintf("Remote macro: press [%u]\n", keycode);
+      else dprintf("Remote macro: release [%u]\n", keycode);
+      process_record_user(keycode, &record);
+    } else {
+      if (pressed) {
+        dprintf("Remote: press [%u]\n", keycode);
+        register_code(keycode);
+    } else {
+        dprintf("Remote: release [%u]\n", keycode);
+        unregister_code(keycode);
+      }
+    }
+  }
+}
+
+static void get_msg(void) {
+  while (uart_available()) {
+    msg[msg_idx] = uart_getchar();
+    dprintf("idx: %u, recv: %u\n", msg_idx, msg[msg_idx]);
+    if (msg_idx == 0 && (msg[msg_idx] != UART_PREAMBLE)) {
+      dprintf("Byte sync error!\n");
+      msg_idx = 0;
+    } else if (msg_idx == (UART_MSG_LEN-1)) {
+      process_uart();
+      msg_idx = 0;
+    } else {
+      msg_idx++;
+    }
+  }
+}
+
+static void handle_host_incoming(void) {
+  get_msg();
+}
+
+static void handle_host_outgoing(void) {
+  // for future reverse link use
+}
+
+static void handle_remote_incoming(void) {
+  // for future reverse link use
+}
+
+static void handle_remote_outgoing(uint16_t keycode, keyrecord_t *record) {
+  if (IS_HID_KC(keycode) || IS_RM_KC(keycode)) {
+    dprintf("Remote: send [%u]\n", keycode);
+    send_msg(keycode, record->event.pressed);
+  }
+}
+
+// Public functions
+
+void matrix_init_remote_kb(void) {
+  uart_init(SERIAL_UART_BAUD);
+  is_host = vbus_detect();
+}
+
+void process_record_remote_kb(uint16_t keycode, keyrecord_t *record) {
+  #if defined (KEYBOARD_HOST)
+  handle_host_outgoing();
+
+  #elif defined(KEYBOARD_REMOTE)
+  handle_remote_outgoing(keycode, record);
+
+  #else //auto check with VBUS
+  if (is_host) {
+    handle_host_outgoing();
+  }
+  else {
+    handle_remote_outgoing(keycode, record);
+  }
+  #endif
+}
+
+void matrix_scan_remote_kb(void) {
+  #if defined(KEYBOARD_HOST)
+  handle_host_incoming();
+
+  #elif defined (KEYBOARD_REMOTE)
+  handle_remote_incoming();
+
+  #else //auto check with VBUS
+  if (is_host) {
+    handle_host_incoming();
+  }
+  else {
+    handle_remote_incoming();
+  }
+  #endif
+}
diff --git a/keyboards/nullbitsco/nibble/remote_kb.h b/keyboards/nullbitsco/nibble/remote_kb.h
new file mode 100644
index 00000000000..e2b24655b5d
--- /dev/null
+++ b/keyboards/nullbitsco/nibble/remote_kb.h
@@ -0,0 +1,53 @@
+/* Copyright 2020 Jay Greco
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+#include "tmk_core/common/uart.h"
+
+#define SERIAL_UART_BAUD 153600 //low error rate for 32u4 @ 16MHz
+
+#define UART_PREAMBLE 0x69
+#define UART_MSG_LEN  5
+#define UART_NULL     0
+
+#define IDX_PREAMBLE  0
+#define IDX_KCLSB     1
+#define IDX_KCMSB     2
+#define IDX_PRESSED   3
+#define IDX_CHECKSUM  4
+
+#define IS_HID_KC(x) ((x > 0) && (x < 0xFF))
+#define IS_RM_KC(x) ((x >= RM_BASE) && (x <= 0xFFFF))
+
+#define RM_BASE 0xFFFF-16
+enum remote_macros {
+  RM_1 = RM_BASE,
+  RM_2,  RM_3,
+  RM_4,  RM_5,
+  RM_6,  RM_7,
+  RM_8,  RM_9,
+  RM_10, RM_11,
+  RM_12, RM_13,
+  RM_14, RM_15,
+};
+
+
+// Public functions
+void
+ matrix_init_remote_kb(void),
+ process_record_remote_kb(uint16_t keycode, keyrecord_t *record),
+ matrix_scan_remote_kb(void);
\ No newline at end of file
diff --git a/keyboards/nullbitsco/nibble/rules.mk b/keyboards/nullbitsco/nibble/rules.mk
new file mode 100644
index 00000000000..683e2908669
--- /dev/null
+++ b/keyboards/nullbitsco/nibble/rules.mk
@@ -0,0 +1,35 @@
+# MCU name
+MCU = atmega32u4
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no        # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+ENCODER_ENABLE = yes        # Use rotary encoder
+LTO_ENABLE = yes            # Link-time optimization
+CUSTOM_MATRIX = lite        # Lite custom matrix 
+
+# Project specific files
+SRC += matrix.c \
+       bitc_led.c \
+       big_led.c \
+       remote_kb.c \
+       tmk_core/common/uart.c