From 98599173d7306d53cc8603d40bc50e229025fbdf Mon Sep 17 00:00:00 2001 From: fauxpark Date: Fri, 6 Sep 2019 07:50:43 +1000 Subject: [PATCH] Add 16U2, 16U4 and USB646 to mcu_selection.mk (#6566) --- keyboards/lfkeyboards/lfk78/rules.mk | 12 -------- keyboards/lfkeyboards/lfk87/rules.mk | 12 -------- keyboards/lfkeyboards/mini1800/rules.mk | 36 ------------------------ keyboards/lfkeyboards/smk65/rules.mk | 12 -------- keyboards/naked48/rules.mk | 1 - keyboards/sixkeyboard/rules.mk | 36 ------------------------ keyboards/xd004/v1/rules.mk | 37 ------------------------- quantum/mcu_selection.mk | 2 +- 8 files changed, 1 insertion(+), 147 deletions(-) diff --git a/keyboards/lfkeyboards/lfk78/rules.mk b/keyboards/lfkeyboards/lfk78/rules.mk index cc314c97a2c..b9cdf230762 100644 --- a/keyboards/lfkeyboards/lfk78/rules.mk +++ b/keyboards/lfkeyboards/lfk78/rules.mk @@ -21,18 +21,6 @@ OPT_DEFS += -DLFK_REV_STRING=\"Rev$(LFK_REV)\" # Extra source files for IS3731 lighting SRC = TWIlib.c issi.c lighting.c -# Processor frequency. -F_CPU = 16000000 - -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) MOUSEKEY_ENABLE = no # Mouse keys(+4700) EXTRAKEY_ENABLE = yes # Audio control and System control(+450) diff --git a/keyboards/lfkeyboards/lfk87/rules.mk b/keyboards/lfkeyboards/lfk87/rules.mk index c10f4730657..bc96e3520e7 100644 --- a/keyboards/lfkeyboards/lfk87/rules.mk +++ b/keyboards/lfkeyboards/lfk87/rules.mk @@ -18,18 +18,6 @@ OPT_DEFS += -DLFK_TKL_REV_$(LFK_REV) # Extra source files for IS3731 lighting SRC = TWIlib.c issi.c lighting.c -# Processor frequency. -F_CPU = 16000000 - -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - LAYOUTS = tkl_ansi tkl_iso # Build Options diff --git a/keyboards/lfkeyboards/mini1800/rules.mk b/keyboards/lfkeyboards/mini1800/rules.mk index a1e52aae94a..a06225491f9 100644 --- a/keyboards/lfkeyboards/mini1800/rules.mk +++ b/keyboards/lfkeyboards/mini1800/rules.mk @@ -16,42 +16,6 @@ else endif OPT_DEFS += -DLFK_TKL_REV_$(LFK_REV) -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - # Extra source files for IS3731 lighting SRC = TWIlib.c issi.c lighting.c diff --git a/keyboards/lfkeyboards/smk65/rules.mk b/keyboards/lfkeyboards/smk65/rules.mk index b7f94154a45..5834cf5c3ae 100644 --- a/keyboards/lfkeyboards/smk65/rules.mk +++ b/keyboards/lfkeyboards/smk65/rules.mk @@ -3,15 +3,3 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096 # Extra source files for IS3731 lighting SRC = TWIlib.c issi.c lighting.c - -# Processor frequency. -F_CPU = 16000000 - -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT diff --git a/keyboards/naked48/rules.mk b/keyboards/naked48/rules.mk index 02a7d9ab2a0..53e2dfc21cc 100644 --- a/keyboards/naked48/rules.mk +++ b/keyboards/naked48/rules.mk @@ -3,7 +3,6 @@ QUANTUM_LIB_SRC += serial.c # SRC += ssd1306.c # MCU name -#MCU = at90usb1287 MCU = atmega32u4 # Processor frequency. diff --git a/keyboards/sixkeyboard/rules.mk b/keyboards/sixkeyboard/rules.mk index 52213f341a3..b718c7e65fb 100644 --- a/keyboards/sixkeyboard/rules.mk +++ b/keyboards/sixkeyboard/rules.mk @@ -3,42 +3,6 @@ SRC = matrix.c # MCU name MCU = atmega16u2 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - # Boot Section Size in *bytes* # Teensy halfKay 512 diff --git a/keyboards/xd004/v1/rules.mk b/keyboards/xd004/v1/rules.mk index c55d65c0f58..9cc03498a7a 100644 --- a/keyboards/xd004/v1/rules.mk +++ b/keyboards/xd004/v1/rules.mk @@ -2,43 +2,6 @@ MCU = atmega16u2 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# LUFA specific -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - # Boot Section Size in *bytes* # Teensy halfKay 512 # Teensy++ halfKay 2048 diff --git a/quantum/mcu_selection.mk b/quantum/mcu_selection.mk index 2d62dcbf1e3..1af0123e2bc 100644 --- a/quantum/mcu_selection.mk +++ b/quantum/mcu_selection.mk @@ -36,7 +36,7 @@ ifneq ($(findstring STM32F303, $(MCU)),) DFU_SUFFIX_ARGS = -p DF11 -v 0483 endif -ifneq (,$(filter $(MCU),atmega32u2 atmega32u4 at90usb1286)) +ifneq (,$(filter $(MCU),atmega16u2 atmega32u2 atmega16u4 atmega32u4 at90usb646 at90usb1286)) # Processor frequency. # This will define a symbol, F_CPU, in all source code files equal to the # processor frequency in Hz. You can then use this symbol in your source code to