diff --git a/keyboards/winkeyless/bface/README.md b/keyboards/winkeyless/bface/README.md index f1789b04cfa..da0eb8088b6 100644 --- a/keyboards/winkeyless/bface/README.md +++ b/keyboards/winkeyless/bface/README.md @@ -14,6 +14,8 @@ Flashing ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods. +**Reset Key:** Hold down the key located at K00, commonly programmed as left control while plugging in the keyboard. + Windows: 1. Download [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash). 2. Place your keyboard into reset. @@ -33,7 +35,7 @@ macOS: 3. Install the following packages: ``` brew install python - brew install pyusb + pip3 install pyusb brew install --HEAD`https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb ``` diff --git a/keyboards/winkeyless/bface/backlight_ps2avrGB.c b/keyboards/winkeyless/bface/backlight_ps2avrGB.c deleted file mode 100644 index c0f6428407c..00000000000 --- a/keyboards/winkeyless/bface/backlight_ps2avrGB.c +++ /dev/null @@ -1,94 +0,0 @@ -/* Copyright 2017 Sebastian Kaim - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#ifdef BACKLIGHT_ENABLE - -#include "backlight_ps2avrGB.h" -#define sbi(reg,bit) reg |= (_BV(bit)) -#define cbi(reg,bit) reg &= (~_BV(bit)) -#define PWM10 WGM10 -#define PWM11 WGM11 -#define COM1x1 COM1B1 -#define OCR1x OCR1B - -void backlight_init_ports(void) -{ -#if BACKLIGHT_ON_STATE == 0 - backlight_off(); -#else - backlight_on(); -#endif - - // setup pwm - // this bitmagic is sourced from the original firmware - /*TCCR1B = ((TCCR1B & ~0x07) | 0x03); - TCNT1H = 0; - TCNT1L = 0; - sbi(TIMSK, TOIE1); - OCR1BH = 0; - OCR1BL = 0; - cbi(TCCR1A,PWM11); - sbi(TCCR1A,PWM10); - sbi(TCCR1A,COM1B1); - cbi(TCCR1A,COM1B0);*/ - ICR1 = 0xFFFF; - - TCCR1A = _BV(COM1x1) | _BV(WGM11); // = 0b00001010; - TCCR1B = _BV(WGM13) | _BV(WGM12) | _BV(CS10); // = 0b00011001; - - backlight_init(); -} - -void backlight_set(uint8_t level) -{ - if( level == 0 ) { - backlight_off(); - } - else { - backlight_on(); - /*uint8_t pwm = get_pwm_for_brightness(level); - set_backlight_pwm(pwm); - TCCR1A |= _BV(COM1x1); - OCR1x = (level >= 2) ? 0xFFFF : 0x00FF;*/ - } -} - -#define PWM_MAX 0xFF -uint8_t get_pwm_for_brightness(uint8_t level) -{ - // we need to cast up here to allow multiplication with 0xFF. We could also use floats, but this is probably a lot faster. - uint16_t brightness = (uint16_t)level * (uint16_t)PWM_MAX / (uint16_t)BACKLIGHT_LEVELS; - return (uint8_t)brightness; -} - -void backlight_on(void) -{ - //_SFR_IO8(0x12) |= _BV(0x4); - LED_PIN |= BACKLIGHT_PORT_NUM; -} - -void backlight_off(void) -{ - //_SFR_IO8(0x12) &= ~_BV(0x4); - LED_PIN &= ~BACKLIGHT_PORT_NUM; -} - -void set_backlight_pwm(uint8_t level) { - // this does not work (yet) - //OCR1B = level; -} - -#endif // BACKLIGHT_ENABLE diff --git a/keyboards/winkeyless/bface/backlight_ps2avrGB.h b/keyboards/winkeyless/bface/backlight_ps2avrGB.h deleted file mode 100644 index d5ca9039936..00000000000 --- a/keyboards/winkeyless/bface/backlight_ps2avrGB.h +++ /dev/null @@ -1,35 +0,0 @@ -/* Copyright 2017 Sebastian Kaim - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - - -#if defined(__AVR__) -#include -#include -#include -#endif -#include -#include -#include "backlight.h" - -#ifndef PS2AVRGB_BACKLIGHT_H -#define PS2AVRGB_BACKLIGHT_H - -uint8_t get_pwm_for_brightness(uint8_t level); -void set_backlight_pwm(uint8_t level); -void backlight_on(void); -void backlight_off(void); - -#endif diff --git a/keyboards/winkeyless/bface/bface.c b/keyboards/winkeyless/bface/bface.c index 8422a4a40b0..1c83be4b8d5 100644 --- a/keyboards/winkeyless/bface/bface.c +++ b/keyboards/winkeyless/bface/bface.c @@ -1,30 +1,23 @@ -/* -Copyright 2017 Luiz Ribeiro -Copyright 2018 Sebastian Kaim - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include "bface.h" +/* Copyright 2019 MechMerlin + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ #include "rgblight.h" - -#include - -#include "action_layer.h" -#include "i2c.h" +#include "i2c_master.h" #include "quantum.h" +#ifdef RGBLIGHT_ENABLE extern rgblight_config_t rgblight_config; void rgblight_set(void) { @@ -37,10 +30,59 @@ void rgblight_set(void) { } i2c_init(); - i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM); + i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100); +} +#endif + +void matrix_init_kb(void) { +#ifdef RGBLIGHT_ENABLE + if (rgblight_config.enable) { + i2c_init(); + i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100); + } +#endif + // call user level keymaps, if any + matrix_init_user(); +} + +void matrix_scan_kb(void) { +#ifdef RGBLIGHT_ENABLE + rgblight_task(); +#endif + matrix_scan_user(); + /* Nothing else for now. */ } __attribute__ ((weak)) void matrix_scan_user(void) { - rgblight_task(); +} + +void backlight_init_ports(void) { + // initialize pins D0, D1, D4 and D6 as output + setPinOutput(D0); + setPinOutput(D1); + setPinOutput(D4); + setPinOutput(D6); + + // turn backlight LEDs on + writePinHigh(D0); + writePinHigh(D1); + writePinHigh(D4); + writePinHigh(D6); +} + +void backlight_set(uint8_t level) { + if (level == 0) { + // turn backlight LEDs off + writePinLow(D0); + writePinLow(D1); + writePinLow(D4); + writePinLow(D6); + } else { + // turn backlight LEDs on + writePinHigh(D0); + writePinHigh(D1); + writePinHigh(D4); + writePinHigh(D6); + } } diff --git a/keyboards/winkeyless/bface/bface.h b/keyboards/winkeyless/bface/bface.h index 62d62f69531..f7a3b9521f4 100644 --- a/keyboards/winkeyless/bface/bface.h +++ b/keyboards/winkeyless/bface/bface.h @@ -16,8 +16,7 @@ You should have received a copy of the GNU General Public License along with this program. If not, see . */ -#ifndef KEYMAP_COMMON_H -#define KEYMAP_COMMON_H +#pragma once #include "quantum_keycodes.h" #include "keycode.h" @@ -27,8 +26,8 @@ along with this program. If not, see . K04, K14, K24, K34, K44, K54, K16, KB6, KB7, K17, KA4, KB4, KC4, KE4, \ K03, K13, K23, K33, K43, K53, K26, KC6, KC7, K27, KA3, KB3, KC3, KD3, \ K02, K12, K22, K32, K42, K52, K36, KD6, KD7, K37, KA2, KB2, KD2, \ - K01, K11, K21, K31, K41, K51, K46, KE6, KE7, K47, KA1, KB1, \ - K00, K10, K20, K56, K57, KA0, KB0, KC0 \ + K01, K11, K21, K31, K41, K51, K46, KE6, KE7, K47, KA1, KB1, \ + K00, K10, K20, K56, K57, KA0, KB0, KC0 \ ){ \ { K00, K10, K20, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KA0, KB0, KC0, KC_NO, KC_NO }, \ { K01, K11, K21, K31, K41, K51, KC_NO, KC_NO, KC_NO, KC_NO, KA1, KB1, KC_NO, KC_NO, KC_NO }, \ @@ -37,8 +36,6 @@ along with this program. If not, see . { K04, K14, K24, K34, K44, K54, KC_NO, KC_NO, KC_NO, KC_NO, KA4, KB4, KC4, KC_NO, KE4 }, \ { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \ { KC_NO, K16, K26, K36, K46, K56, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KB6, KC6, KD6, KE6 }, \ - { KC_NO, K17, K27, K37, K47, K57, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KB7, KC7, KD7, KE7 } \ + { KC_NO, K17, K27, K37, K47, K57, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KB7, KC7, KD7, KE7 } \ } - -#endif diff --git a/keyboards/winkeyless/bface/config.h b/keyboards/winkeyless/bface/config.h index 11ac373c023..7a1fe333549 100644 --- a/keyboards/winkeyless/bface/config.h +++ b/keyboards/winkeyless/bface/config.h @@ -16,8 +16,7 @@ You should have received a copy of the GNU General Public License along with this program. If not, see . */ -#ifndef CONFIG_H -#define CONFIG_H +#pragma once #define VENDOR_ID 0x20A0 #define PRODUCT_ID 0x422D @@ -30,6 +29,11 @@ along with this program. If not, see . #define MATRIX_ROWS 8 #define MATRIX_COLS 15 +// 0 1 2 3 4 5 6 7 8 9 A B C D E +#define MATRIX_ROW_PINS { B0, B1, B2, B3, B4, B5, B6, B7 } +#define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, C7, C6, C5, C4, C3, C2, D7} +#define UNUSED_PINS + #define RGBLED_NUM 16 #define RGBLIGHT_ANIMATIONS @@ -43,4 +47,3 @@ along with this program. If not, see . #define BACKLIGHT_PORT_NUM (1 << 4) #endif -#endif diff --git a/keyboards/winkeyless/bface/i2c.c b/keyboards/winkeyless/bface/i2c.c deleted file mode 100644 index c27f3e3d17e..00000000000 --- a/keyboards/winkeyless/bface/i2c.c +++ /dev/null @@ -1,104 +0,0 @@ -/* -Copyright 2016 Luiz Ribeiro - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include -#include - -#include "i2c.h" - -void i2c_set_bitrate(uint16_t bitrate_khz) { - uint8_t bitrate_div = ((F_CPU / 1000l) / bitrate_khz); - if (bitrate_div >= 16) { - bitrate_div = (bitrate_div - 16) / 2; - } - TWBR = bitrate_div; -} - -void i2c_init(void) { - // set pull-up resistors on I2C bus pins - PORTC |= 0b11; - - i2c_set_bitrate(400); - - // enable TWI (two-wire interface) - TWCR |= (1 << TWEN); - - // enable TWI interrupt and slave address ACK - TWCR |= (1 << TWIE); - TWCR |= (1 << TWEA); -} - -uint8_t i2c_start(uint8_t address) { - // reset TWI control register - TWCR = 0; - - // begin transmission and wait for it to end - TWCR = (1< - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef __I2C_H__ -#define __I2C_H__ - -void i2c_init(void); -void i2c_set_bitrate(uint16_t bitrate_khz); -uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length); - -#endif diff --git a/keyboards/winkeyless/bface/matrix.c b/keyboards/winkeyless/bface/matrix.c deleted file mode 100644 index b3761a63cad..00000000000 --- a/keyboards/winkeyless/bface/matrix.c +++ /dev/null @@ -1,113 +0,0 @@ -/* -Copyright 2017 Luiz Ribeiro - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include -#include - -#include "matrix.h" - -#ifndef DEBOUNCE -# define DEBOUNCE 5 -#endif - -static uint8_t debouncing = DEBOUNCE; - -static matrix_row_t matrix[MATRIX_ROWS]; -static matrix_row_t matrix_debouncing[MATRIX_ROWS]; - -void matrix_init(void) { - // all outputs for rows high - DDRB = 0xFF; - PORTB = 0xFF; - // all inputs for columns - DDRA = 0x00; - DDRC &= ~(0x111111<<2); - DDRD &= ~(1<> 1) & 0x55) | ((x << 1) & 0xaa); - x = ((x >> 2) & 0x33) | ((x << 2) & 0xcc); - x = ((x >> 4) & 0x0f) | ((x << 4) & 0xf0); - return x; -} - -uint8_t matrix_scan(void) { - for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - matrix_set_row_status(row); - _delay_us(5); - - matrix_row_t cols = ( - // cols 0..7, PORTA 0 -> 7 - (~PINA) & 0xFF - ) | ( - // cols 8..13, PORTC 7 -> 0 - bit_reverse((~PINC) & 0xFF) << 8 - ) | ( - // col 14, PORTD 7 - ((~PIND) & (1 << PIND7)) << 7 - ); - - if (matrix_debouncing[row] != cols) { - matrix_debouncing[row] = cols; - debouncing = DEBOUNCE; - } - } - - if (debouncing) { - if (--debouncing) { - _delay_ms(1); - } else { - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - matrix[i] = matrix_debouncing[i]; - } - } - } - - matrix_scan_user(); - - return 1; -} - -inline matrix_row_t matrix_get_row(uint8_t row) { - return matrix[row]; -} - -void matrix_print(void) { -} diff --git a/keyboards/winkeyless/bface/rules.mk b/keyboards/winkeyless/bface/rules.mk index 369ccf2edac..b6d172f266e 100644 --- a/keyboards/winkeyless/bface/rules.mk +++ b/keyboards/winkeyless/bface/rules.mk @@ -25,7 +25,7 @@ NO_SUSPEND_POWER_DOWN = yes F_CPU = 12000000 # build options -BOOTMAGIC_ENABLE = yes +BOOTMAGIC_ENABLE = no MOUSEKEY_ENABLE = yes EXTRAKEY_ENABLE = yes CONSOLE_ENABLE = no @@ -40,8 +40,7 @@ OPT_DEFS = -DDEBUG_LEVEL=0 OPT_DEFS += -DBOOTLOADER_SIZE=2048 # custom matrix setup -CUSTOM_MATRIX = yes -SRC = matrix.c i2c.c backlight_ps2avrGB.c +SRC = i2c_master.c # programming options PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex diff --git a/keyboards/winkeyless/bface/usbconfig.h b/keyboards/winkeyless/bface/usbconfig.h index f87922615b3..192d80d9163 100644 --- a/keyboards/winkeyless/bface/usbconfig.h +++ b/keyboards/winkeyless/bface/usbconfig.h @@ -8,8 +8,7 @@ * This Revision: $Id: usbconfig-prototype.h 785 2010-05-30 17:57:07Z cs $ */ -#ifndef __usbconfig_h_included__ -#define __usbconfig_h_included__ +#pragma once #include "config.h" @@ -392,5 +391,3 @@ section at the end of this file). /* #define USB_INTR_PENDING EIFR */ #define USB_INTR_PENDING_BIT INTF1 #define USB_INTR_VECTOR INT1_vect - -#endif /* __usbconfig_h_included__ */