[Keyboard] Set reasonable defaults for Corne keyboard (#13440)

* [Keyboard] Set reasonable defaults for Corne keyboard * Add note about bootmagic * Make bootmagic config super weak * cleanup * Apply suggestions from code review * Update keyboards/crkbd/readme.md
2024-11-19 03:36:28 +00:00 · 2021-07-06 10:47:26 -07:00 · 2021-07-06 10:47:26 -07:00 · 792c4e7893
commit 792c4e7893
parent acf7de7a52
5 changed files with 72 additions and 37 deletions
--- a/keyboards/crkbd/config.h
+++ b/keyboards/crkbd/config.h
@ -21,20 +21,22 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "config_common.h"

 /* USB Device descriptor parameter */
-#define VENDOR_ID       0x4653
-#define PRODUCT_ID      0x0001
-#define DEVICE_VER      0x0001
-#define MANUFACTURER    foostan
-#define PRODUCT         Corne
+#define VENDOR_ID    0x4653
+#define PRODUCT_ID   0x0001
+#define DEVICE_VER   0x0001
+#define MANUFACTURER foostan
+#define PRODUCT      Corne

 /* key matrix size */
 // Rows are doubled-up
-#define MATRIX_ROWS 8
-#define MATRIX_COLS 6
-#define MATRIX_ROW_PINS { D4, C6, D7, E6 }
+#define MATRIX_ROWS  8
+#define MATRIX_COLS  6
+#define MATRIX_ROW_PINS \
+    { D4, C6, D7, E6 }

 // wiring of each half
-#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3 }
+#define MATRIX_COL_PINS \
+    { F4, F5, F6, F7, B1, B3 }
 // #define MATRIX_COL_PINS { B2, B3, B1, F7, F6, F5, F4 } //uncomment this line and comment line above if you need to reverse left-to-right key order

 /* define if matrix has ghost */
@ -51,7 +53,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Locking resynchronize hack */
 //#define LOCKING_RESYNC_ENABLE

-
 /*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
--- a/keyboards/crkbd/post_config.h
+++ b/keyboards/crkbd/post_config.h
@ -0,0 +1,31 @@
+/* Copyright 2020 Christopher Courtney, aka Drashna Jael're  (@drashna) <drashna@live.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#ifndef BOOTMAGIC_LITE_ROW
+#    define BOOTMAGIC_LITE_ROW 0
+#endif
+#ifndef BOOTMAGIC_LITE_COLUMN
+#    define BOOTMAGIC_LITE_COLUMN 1
+#endif
+
+#ifndef BOOTMAGIC_LITE_ROW_RIGHT
+#    define BOOTMAGIC_LITE_ROW_RIGHT 4
+#endif
+#ifndef BOOTMAGIC_LITE_COLUMN_RIGHT
+#    define BOOTMAGIC_LITE_COLUMN_RIGHT 1
+#endif
--- a/keyboards/crkbd/readme.md
+++ b/keyboards/crkbd/readme.md
@ -20,6 +20,12 @@ make crkbd:default

 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

+## Bootloader
+
+The Corne PCBs have a reset button next to the TRRS jack to enter in to the bootloader.
+
+Additionally, if you hold down the "Q" or "P" buttons when plugging in that half of the keyboard (per the default QWERTY layout), this will jump to the bootloader and reset the EEPROM (persistent storage).  This would normally be the very top corner-most position, but due to the breakaway column, it's left at Q and P for compatibility. 
+
 ## RGB Matrix 
 The Corne Keyboard also supports using the RGB Matrix feature, in place of RGB Light.  This provids a better experience when using the keyboard, as it supports a number of per key effects properly.  If you're not using the in switch LEDs, then you may want to pass on doing this. 

--- a/keyboards/crkbd/rev1/config.h
+++ b/keyboards/crkbd/rev1/config.h
@ -22,17 +22,20 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define SOFT_SERIAL_PIN D2

 /* ws2812 RGB LED */
-#define RGB_DI_PIN D3
+#define RGB_DI_PIN      D3

 #ifdef RGBLIGHT_ENABLE
-#    define RGBLED_NUM 12  // Number of LEDs
+#    define RGBLED_NUM 12 // Number of LEDs
+#    define RGBLED_SPLIT \
+        { 6, 6 }
 #    define RGBLIGHT_SPLIT
 #endif

 #ifdef RGB_MATRIX_ENABLE
-#    define RGBLED_NUM 54  // Number of LEDs
+#    define RGBLED_NUM       54 // Number of LEDs
 #    define DRIVER_LED_TOTAL RGBLED_NUM
-#    define RGB_MATRIX_SPLIT { 27, 27 }
+#    define RGB_MATRIX_SPLIT \
+        { 27, 27 }
 #    define SPLIT_TRANSPORT_MIRROR
 #endif

--- a/keyboards/crkbd/rules.mk
+++ b/keyboards/crkbd/rules.mk
@ -2,39 +2,33 @@
 MCU = atmega32u4

 # Bootloader selection
-#   Teensy       halfkay
-#   Pro Micro    caterina
-#   Atmel DFU    atmel-dfu
-#   LUFA DFU     lufa-dfu
-#   QMK DFU      qmk-dfu
-#   ATmega32A    bootloadHID
-#   ATmega328P   USBasp
 BOOTLOADER = caterina

 # Build Options
-#   change to "no" to disable the options, or define them in the Makefile in
-#   the appropriate keymap folder that will get included automatically
+#   change yes to no to disable
 #
-BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
 MOUSEKEY_ENABLE = yes       # Mouse keys
-EXTRAKEY_ENABLE = no       # Audio control and System control
+EXTRAKEY_ENABLE = yes       # Audio control and System control
 CONSOLE_ENABLE = no         # Console for debug
-COMMAND_ENABLE = no        # Commands for debug and configuration
-NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-BACKLIGHT_ENABLE = no      # Enable keyboard backlight functionality
-MIDI_ENABLE = no            # MIDI controls
-AUDIO_ENABLE = no           # Audio output on port C6
-UNICODE_ENABLE = no         # Unicode
-BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no       # Enable WS2812 RGB underlight.
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+BLUETOOTH_ENABLE = no       # Enable Bluetooth
+AUDIO_ENABLE = no           # Audio output
 RGB_MATRIX_ENABLE = no
 RGB_MATRIX_DRIVER = WS2812

-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
-
 # if firmware size over limit, try this option
 # LTO_ENABLE = yes
-LAYOUTS = split_3x5_3 split_3x6_3

 DEFAULT_FOLDER = crkbd/rev1
+
+RGBLIGHT_SUPPORTED = yes
+RGB_MATRIX_SUPPORTED = yes
+
+LAYOUTS = split_3x5_3 split_3x6_3