Fix docs typo (#17254)

This commit is contained in:
Dasky 2022-05-30 23:05:57 +01:00 committed by GitHub
parent 3826fca637
commit 25ec68c408
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
2 changed files with 2 additions and 2 deletions

View file

@ -266,7 +266,7 @@ Flashing sequence:
### `make` Targets
* `:dfu-util`: Waits until an STM32 bootloader device is available, and then flashes the firmware.
* `:dfu-util-split-left` and `:dfu-util-split-right`: Flashes the firmware as with `:avrdude`, but also sets the handedness setting in EEPROM. This is ideal for Proton-C-based split keyboards.
* `:dfu-util-split-left` and `:dfu-util-split-right`: Flashes the firmware as with `:dfu-util`, but also sets the handedness setting in EEPROM. This is ideal for Proton-C-based split keyboards.
* `:st-link-cli`: Allows you to flash the firmware via the ST-Link CLI utility, rather than dfu-util. Requires an ST-Link dongle.
* `:st-flash`: Allows you to flash the firmware via the `st-flash` utility from [STLink Tools](https://github.com/stlink-org/stlink), rather than dfu-util. Requires an ST-Link dongle.

View file

@ -252,7 +252,7 @@ BOOTLOADER = stm32-dfu
### `make` 构建目标
* `:dfu-util`: 每5秒检测一次直到发现可用的STM32 bootloader设备然后进行固件刷写。
* `:dfu-util-split-left``:dfu-util-split-right`: 同 `:avrdude` 一样会刷写固件但额外地会设置手性设置到EEPROM中对于基于Proton-C的分体式键盘这是理想的方法。
* `:dfu-util-split-left``:dfu-util-split-right`: 同 `:dfu-util` 一样会刷写固件但额外地会设置手性设置到EEPROM中对于基于Proton-C的分体式键盘这是理想的方法。
* `:st-link-cli`: 通过ST-Link CLI工具集而非dfu-util进行刷写需要有ST-Link电子狗。
* `:st-flash`: 通过[STLink工具](https://github.com/stlink-org/stlink)内的 `st-flash` 工具而非dfu-util进行刷写需要有ST-Link电子狗。