mirror of
https://github.com/qmk/qmk_firmware
synced 2024-11-10 05:59:44 +00:00
Move Ergodox EZ RGB Light code to custom driver (#7309)
* Move Ergodox EZ RGB code to custom driver Also implements full addressing of Ergodox EZ's LED Strip, as written by seebs Co-authored-by: Seebs <seebs@seebs.net> * Make Clipping range accessible for custom drivers * Remove RGBW_BB_TWI from driver and docs * Revert changes to clipping range support * Use just rgblight_set instead of full custom driver * Convert to i2c_master commands * Rename rgblight driver and clean up includes
This commit is contained in:
Drashna Jaelre
GitHub
parent
8dc9764f31
commit
1cf63a193b
5 changed files with 120 additions and 132 deletions
|
|
@ -36,108 +36,6 @@
|
|||
void ws2812_sendarray(uint8_t *array, uint16_t length);
|
||||
void ws2812_sendarray_mask(uint8_t *array, uint16_t length, uint8_t pinmask);
|
||||
|
||||
#ifdef RGBW_BB_TWI
|
||||
|
||||
// Port for the I2C
|
||||
# define I2C_DDR DDRD
|
||||
# define I2C_PIN PIND
|
||||
# define I2C_PORT PORTD
|
||||
|
||||
// Pins to be used in the bit banging
|
||||
# define I2C_CLK 0
|
||||
# define I2C_DAT 1
|
||||
|
||||
# define I2C_DATA_HI() \
|
||||
I2C_DDR &= ~(1 << I2C_DAT); \
|
||||
I2C_PORT |= (1 << I2C_DAT);
|
||||
# define I2C_DATA_LO() \
|
||||
I2C_DDR |= (1 << I2C_DAT); \
|
||||
I2C_PORT &= ~(1 << I2C_DAT);
|
||||
|
||||
# define I2C_CLOCK_HI() \
|
||||
I2C_DDR &= ~(1 << I2C_CLK); \
|
||||
I2C_PORT |= (1 << I2C_CLK);
|
||||
# define I2C_CLOCK_LO() \
|
||||
I2C_DDR |= (1 << I2C_CLK); \
|
||||
I2C_PORT &= ~(1 << I2C_CLK);
|
||||
|
||||
# define I2C_DELAY 1
|
||||
|
||||
void I2C_WriteBit(unsigned char c) {
|
||||
if (c > 0) {
|
||||
I2C_DATA_HI();
|
||||
} else {
|
||||
I2C_DATA_LO();
|
||||
}
|
||||
|
||||
I2C_CLOCK_HI();
|
||||
_delay_us(I2C_DELAY);
|
||||
|
||||
I2C_CLOCK_LO();
|
||||
_delay_us(I2C_DELAY);
|
||||
|
||||
if (c > 0) {
|
||||
I2C_DATA_LO();
|
||||
}
|
||||
|
||||
_delay_us(I2C_DELAY);
|
||||
}
|
||||
|
||||
// Inits bitbanging port, must be called before using the functions below
|
||||
//
|
||||
void I2C_Init(void) {
|
||||
I2C_PORT &= ~((1 << I2C_DAT) | (1 << I2C_CLK));
|
||||
|
||||
I2C_CLOCK_HI();
|
||||
I2C_DATA_HI();
|
||||
|
||||
_delay_us(I2C_DELAY);
|
||||
}
|
||||
|
||||
// Send a START Condition
|
||||
//
|
||||
void I2C_Start(void) {
|
||||
// set both to high at the same time
|
||||
I2C_DDR &= ~((1 << I2C_DAT) | (1 << I2C_CLK));
|
||||
_delay_us(I2C_DELAY);
|
||||
|
||||
I2C_DATA_LO();
|
||||
_delay_us(I2C_DELAY);
|
||||
|
||||
I2C_CLOCK_LO();
|
||||
_delay_us(I2C_DELAY);
|
||||
}
|
||||
|
||||
// Send a STOP Condition
|
||||
//
|
||||
void I2C_Stop(void) {
|
||||
I2C_CLOCK_HI();
|
||||
_delay_us(I2C_DELAY);
|
||||
|
||||
I2C_DATA_HI();
|
||||
_delay_us(I2C_DELAY);
|
||||
}
|
||||
|
||||
// write a byte to the I2C slave device
|
||||
//
|
||||
unsigned char I2C_Write(unsigned char c) {
|
||||
for (char i = 0; i < 8; i++) {
|
||||
I2C_WriteBit(c & 128);
|
||||
|
||||
c <<= 1;
|
||||
}
|
||||
|
||||
I2C_WriteBit(0);
|
||||
_delay_us(I2C_DELAY);
|
||||
_delay_us(I2C_DELAY);
|
||||
|
||||
// _delay_us(I2C_DELAY);
|
||||
// return I2C_ReadBit();
|
||||
return 0;
|
||||
}
|
||||
|
||||
#endif
|
||||
|
||||
// Setleds for standard RGB
|
||||
void inline ws2812_setleds(LED_TYPE *ledarray, uint16_t leds) {
|
||||
// ws2812_setleds_pin(ledarray,leds, _BV(ws2812_pin));
|
||||
|
|
@ -145,38 +43,15 @@ void inline ws2812_setleds(LED_TYPE *ledarray, uint16_t leds) {
|
|||
}
|
||||
|
||||
void inline ws2812_setleds_pin(LED_TYPE *ledarray, uint16_t leds, uint8_t pinmask) {
|
||||
#ifdef RGBW_BB_TWI
|
||||
uint8_t sreg_prev, twcr_prev;
|
||||
sreg_prev = SREG;
|
||||
twcr_prev = TWCR;
|
||||
cli();
|
||||
TWCR &= ~(1 << TWEN);
|
||||
I2C_Init();
|
||||
I2C_Start();
|
||||
I2C_Write(0x84);
|
||||
uint16_t datlen = leds << 2;
|
||||
uint8_t curbyte;
|
||||
uint8_t *data = (uint8_t *)ledarray;
|
||||
while (datlen--) {
|
||||
curbyte = *data++;
|
||||
I2C_Write(curbyte);
|
||||
}
|
||||
I2C_Stop();
|
||||
SREG = sreg_prev;
|
||||
TWCR = twcr_prev;
|
||||
#endif
|
||||
// ws2812_DDRREG |= pinmask; // Enable DDR
|
||||
// new universal format (DDR)
|
||||
_SFR_IO8((RGB_DI_PIN >> 4) + 1) |= pinmask;
|
||||
|
||||
ws2812_sendarray_mask((uint8_t *)ledarray, leds * sizeof(LED_TYPE), pinmask);
|
||||
|
||||
#ifndef RGBW_BB_TWI
|
||||
# ifdef RGBW
|
||||
#ifdef RGBW
|
||||
_delay_us(80);
|
||||
# else
|
||||
#else
|
||||
_delay_us(50);
|
||||
# endif
|
||||
#endif
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -75,17 +75,21 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
/* ws2812 RGB LED */
|
||||
#define RGB_DI_PIN D7
|
||||
#define RGBLIGHT_ANIMATIONS
|
||||
#define RGBLED_NUM 15 // Number of LEDs
|
||||
#define RGBLIGHT_HUE_STEP 12
|
||||
#define RGBLIGHT_SAT_STEP 255
|
||||
#define RGBLIGHT_VAL_STEP 12
|
||||
|
||||
// Pick one of the modes
|
||||
// Defaults to 15 mirror, for legacy behavior
|
||||
|
||||
// #define ERGODOX_LED_15 // Addresses 15 LEDs, but same position on both halves
|
||||
// #define ERGODOX_LED_15_MIRROR // Addresses 15 LEDs, but are mirrored
|
||||
// #define ERGODOX_LED_30 // Addresses all 30 LED individually
|
||||
|
||||
/* fix space cadet rollover issue */
|
||||
#define DISABLE_SPACE_CADET_ROLLOVER
|
||||
|
||||
#define RGBW_BB_TWI
|
||||
|
||||
#define RGBW 1
|
||||
#define RGBW
|
||||
|
||||
#define RGBLIGHT_SLEEP
|
||||
|
||||
|
|
|
|||
86
keyboards/ergodox_ez/led_i2c.c
Normal file
86
keyboards/ergodox_ez/led_i2c.c
Normal file
|
|
@ -0,0 +1,86 @@
|
|||
/*
|
||||
* light weight WS2812 lib V2.0b
|
||||
*
|
||||
* Controls WS2811/WS2812/WS2812B RGB-LEDs
|
||||
* Author: Tim (cpldcpu@gmail.com)
|
||||
*
|
||||
* Jan 18th, 2014 v2.0b Initial Version
|
||||
* Nov 29th, 2015 v2.3 Added SK6812RGBW support
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#ifdef RGBLIGHT_ENABLE
|
||||
|
||||
# include "ws2812.c"
|
||||
# include "ergodox_ez.h"
|
||||
|
||||
extern rgblight_config_t rgblight_config;
|
||||
|
||||
/*
|
||||
* Forward declare internal functions
|
||||
*
|
||||
* The functions take a byte-array and send to the data output as WS2812 bitstream.
|
||||
* The length is the number of bytes to send - three per LED.
|
||||
*/
|
||||
|
||||
void ws2812_sendarray(uint8_t *array, uint16_t length);
|
||||
void ws2812_sendarray_mask(uint8_t *array, uint16_t length, uint8_t pinmask);
|
||||
|
||||
|
||||
|
||||
|
||||
void rgblight_set(void) {
|
||||
if (!rgblight_config.enable) {
|
||||
for (uint8_t i = 0; i < RGBLED_NUM; i++) {
|
||||
led[i].r = 0;
|
||||
led[i].g = 0;
|
||||
led[i].b = 0;
|
||||
#ifdef RGBW
|
||||
led[i].w = 0;
|
||||
#endif
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
uint8_t led_num = RGBLED_NUM;
|
||||
i2c_init();
|
||||
i2c_start(0x84, ERGODOX_EZ_I2C_TIMEOUT);
|
||||
int i = 0;
|
||||
# if defined(ERGODOX_LED_30)
|
||||
// prevent right-half code from trying to bitbang all 30
|
||||
// so with 30 LEDs, we count from 29 to 15 here, and the
|
||||
// other half does 0 to 14.
|
||||
led_num = RGBLED_NUM / 2;
|
||||
for (i = led_num + led_num - 1; i >= led_num; --i)
|
||||
# elif defined(ERGODOX_LED_15_MIRROR)
|
||||
for (i = 0; i < led_num; ++i)
|
||||
# else // ERGDOX_LED_15 non-mirrored
|
||||
for (i = led_num - 1; i >= 0; --i)
|
||||
# endif
|
||||
{
|
||||
uint8_t *data = (uint8_t *)(led + i);
|
||||
i2c_write(*data++, ERGODOX_EZ_I2C_TIMEOUT);
|
||||
i2c_write(*data++, ERGODOX_EZ_I2C_TIMEOUT);
|
||||
i2c_write(*data++, ERGODOX_EZ_I2C_TIMEOUT);
|
||||
#ifdef RGBW
|
||||
i2c_write(*data++, ERGODOX_EZ_I2C_TIMEOUT);
|
||||
#endif
|
||||
}
|
||||
i2c_stop();
|
||||
|
||||
ws2812_setleds(led, RGBLED_NUM);
|
||||
}
|
||||
|
||||
|
||||
#endif // RGBLIGHT_ENABLE
|
||||
20
keyboards/ergodox_ez/post_config.h
Normal file
20
keyboards/ergodox_ez/post_config.h
Normal file
|
|
@ -0,0 +1,20 @@
|
|||
#pragma once
|
||||
|
||||
#if !defined(ERGODOX_LED_15) && !defined(ERGODOX_LED_30)
|
||||
// if no value is defined, assume previous behavior
|
||||
// # define ERGODOX_LED_15
|
||||
// # define ERGODOX_LED_30
|
||||
# define ERGODOX_LED_15_MIRROR
|
||||
#endif
|
||||
|
||||
#if (defined(ERGODOX_LED_30) + defined(ERGODOX_LED_15) + defined(ERGODOX_LED_15_MIRROR)) != 1
|
||||
# error "You must only define one of the ERGODOX_LED options."
|
||||
#endif
|
||||
|
||||
#ifdef ERGODOX_LED_30
|
||||
// If using 30 LEDs, then define that many
|
||||
# define RGBLED_NUM 30 // Number of LEDs
|
||||
#else
|
||||
// If not, then only define 15
|
||||
# define RGBLED_NUM 15 // Number of LEDs
|
||||
#endif
|
||||
|
|
@ -31,11 +31,14 @@ SWAP_HANDS_ENABLE= yes # Allow swapping hands of keyboard
|
|||
SLEEP_LED_ENABLE = no
|
||||
API_SYSEX_ENABLE = no
|
||||
RGBLIGHT_ENABLE = yes
|
||||
RGBLIGHT_CUSTOM_DRIVER = yes
|
||||
|
||||
RGB_MATRIX_ENABLE = no # enable later
|
||||
DEBOUNCE_TYPE = eager_pr
|
||||
|
||||
# project specific files
|
||||
SRC += matrix.c
|
||||
SRC += matrix.c \
|
||||
led_i2c.c
|
||||
QUANTUM_LIB_SRC += i2c_master.c
|
||||
|
||||
LAYOUTS = ergodox
|
||||
|
|
|
|||
Loading…
Reference in a new issue