is31fl3733: driver naming cleanups (#21905)

This commit is contained in:
Ryan 2023-09-13 22:52:16 +10:00 committed by GitHub
parent 2d41443e6a
commit 1cbb5ae99e
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
62 changed files with 358 additions and 277 deletions

View file

@ -83,13 +83,13 @@ You can use between 1 and 4 IS31FL3733 IC's. Do not specify `DRIVER_ADDR_<N>` de
| Variable | Description | Default |
|----------|-------------|---------|
| `ISSI_TIMEOUT` | (Optional) How long to wait for i2c messages, in milliseconds | 100 |
| `ISSI_PERSISTENCE` | (Optional) Retry failed messages this many times | 0 |
| `ISSI_PWM_FREQUENCY` | (Optional) PWM Frequency Setting - IS31FL3733B only | 0 |
| `ISSI_GLOBALCURRENT` | (Optional) Configuration for the Global Current Register | 0xFF |
| `ISSI_SWPULLUP` | (Optional) Set the value of the SWx lines on-chip de-ghosting resistors | PUR_0R (Disabled) |
| `ISSI_CSPULLUP` | (Optional) Set the value of the CSx lines on-chip de-ghosting resistors | PUR_0R (Disabled) |
| `DRIVER_COUNT` | (Required) How many RGB driver IC's are present | |
| `IS31FL3733_I2C_TIMEOUT` | (Optional) How long to wait for i2c messages, in milliseconds | 100 |
| `IS31FL3733_I2C_PERSISTENCE` | (Optional) Retry failed messages this many times | 0 |
| `IS31FL3733_PWM_FREQUENCY` | (Optional) PWM Frequency Setting - IS31FL3733B only | 0 |
| `IS31FL3733_GLOBALCURRENT` | (Optional) Configuration for the Global Current Register | 0xFF |
| `IS31FL3733_SWPULLUP` | (Optional) Set the value of the SWx lines on-chip de-ghosting resistors | PUR_0R (Disabled) |
| `IS31FL3733_CSPULLUP` | (Optional) Set the value of the CSx lines on-chip de-ghosting resistors | PUR_0R (Disabled) |
| `IS31FL3733_DRIVER_COUNT` | (Required) How many RGB driver IC's are present | |
| `RGB_MATRIX_LED_COUNT` | (Required) How many RGB lights are present across all drivers | |
| `DRIVER_ADDR_1` | (Required) Address for the first RGB driver | |
| `DRIVER_ADDR_2` | (Optional) Address for the second RGB driver | |
@ -100,17 +100,17 @@ You can use between 1 and 4 IS31FL3733 IC's. Do not specify `DRIVER_ADDR_<N>` de
| `DRIVER_SYNC_3` | (Optional) Sync configuration for the third RGB driver | 0 |
| `DRIVER_SYNC_4` | (Optional) Sync configuration for the fourth RGB driver | 0 |
The IS31FL3733 IC's have on-chip resistors that can be enabled to allow for de-ghosting of the RGB matrix. By default these resistors are not enabled (`ISSI_SWPULLUP`/`ISSI_CSPULLUP` are given the value of`PUR_0R`), the values that can be set to enable de-ghosting are as follows:
The IS31FL3733 IC's have on-chip resistors that can be enabled to allow for de-ghosting of the RGB matrix. By default these resistors are not enabled (`IS31FL3733_SWPULLUP`/`IS31FL3733_CSPULLUP` are given the value of `IS31FL3733_PUR_0R`), the values that can be set to enable de-ghosting are as follows:
| `ISSI_SWPULLUP/ISSI_CSPULLUP` | Description |
| `IS31FL3733_SWPULLUP/IS31FL3733_CSPULLUP` | Description |
|----------------------|-------------|
| `PUR_0R` | (default) Do not use the on-chip resistors/enable de-ghosting |
| `PUR_05KR` | The 0.5k Ohm resistor used during blanking period (t_NOL) |
| `PUR_3KR` | The 3k Ohm resistor used at all times |
| `PUR_4KR` | The 4k Ohm resistor used at all times |
| `PUR_8KR` | The 8k Ohm resistor used at all times |
| `PUR_16KR` | The 16k Ohm resistor used at all times |
| `PUR_32KR` | The 32k Ohm resistor used during blanking period (t_NOL) |
| `IS31FL3733_PUR_0R` | (default) Do not use the on-chip resistors/enable de-ghosting |
| `IS31FL3733_PUR_05KR` | The 0.5k Ohm resistor used during blanking period (t_NOL) |
| `IS31FL3733_PUR_3KR` | The 3k Ohm resistor used at all times |
| `IS31FL3733_PUR_4KR` | The 4k Ohm resistor used at all times |
| `IS31FL3733_PUR_8KR` | The 8k Ohm resistor used at all times |
| `IS31FL3733_PUR_16KR` | The 16k Ohm resistor used at all times |
| `IS31FL3733_PUR_32KR` | The 32k Ohm resistor used during blanking period (t_NOL) |
Here is an example using 2 drivers.
@ -128,7 +128,7 @@ Here is an example using 2 drivers.
#define DRIVER_ADDR_1 0b1010000
#define DRIVER_ADDR_2 0b1010011
#define DRIVER_COUNT 2
#define IS31FL3733_DRIVER_COUNT 2
#define DRIVER_1_LED_TOTAL 58
#define DRIVER_2_LED_TOTAL 10
#define RGB_MATRIX_LED_COUNT (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)

View file

@ -19,6 +19,7 @@
*/
#include "is31fl3733-simple.h"
#include <string.h>
#include "i2c_master.h"
#include "wait.h"
@ -32,46 +33,46 @@
// ADDR1 represents A1:A0 of the 7-bit address.
// ADDR2 represents A3:A2 of the 7-bit address.
// The result is: 0b101(ADDR2)(ADDR1)
#define ISSI_ADDR_DEFAULT 0x50
#define IS31FL3733_I2C_ADDRESS_DEFAULT 0x50
#define ISSI_COMMANDREGISTER 0xFD
#define ISSI_COMMANDREGISTER_WRITELOCK 0xFE
#define ISSI_INTERRUPTMASKREGISTER 0xF0
#define ISSI_INTERRUPTSTATUSREGISTER 0xF1
#define IS31FL3733_COMMANDREGISTER 0xFD
#define IS31FL3733_COMMANDREGISTER_WRITELOCK 0xFE
#define IS31FL3733_INTERRUPTMASKREGISTER 0xF0
#define IS31FL3733_INTERRUPTSTATUSREGISTER 0xF1
#define ISSI_PAGE_LEDCONTROL 0x00 // PG0
#define ISSI_PAGE_PWM 0x01 // PG1
#define ISSI_PAGE_AUTOBREATH 0x02 // PG2
#define ISSI_PAGE_FUNCTION 0x03 // PG3
#define IS31FL3733_PAGE_LEDCONTROL 0x00 // PG0
#define IS31FL3733_PAGE_PWM 0x01 // PG1
#define IS31FL3733_PAGE_AUTOBREATH 0x02 // PG2
#define IS31FL3733_PAGE_FUNCTION 0x03 // PG3
#define ISSI_REG_CONFIGURATION 0x00 // PG3
#define ISSI_REG_GLOBALCURRENT 0x01 // PG3
#define ISSI_REG_RESET 0x11 // PG3
#define ISSI_REG_SWPULLUP 0x0F // PG3
#define ISSI_REG_CSPULLUP 0x10 // PG3
#define IS31FL3733_REG_CONFIGURATION 0x00 // PG3
#define IS31FL3733_REG_GLOBALCURRENT 0x01 // PG3
#define IS31FL3733_REG_RESET 0x11 // PG3
#define IS31FL3733_REG_SWPULLUP 0x0F // PG3
#define IS31FL3733_REG_CSPULLUP 0x10 // PG3
#ifndef ISSI_TIMEOUT
# define ISSI_TIMEOUT 100
#ifndef IS31FL3733_I2C_TIMEOUT
# define IS31FL3733_I2C_TIMEOUT 100
#endif
#ifndef ISSI_PERSISTENCE
# define ISSI_PERSISTENCE 0
#ifndef IS31FL3733_I2C_PERSISTENCE
# define IS31FL3733_I2C_PERSISTENCE 0
#endif
#ifndef ISSI_PWM_FREQUENCY
# define ISSI_PWM_FREQUENCY 0b000 // PFS - IS31FL3733B only
#ifndef IS31FL3733_PWM_FREQUENCY
# define IS31FL3733_PWM_FREQUENCY 0b000 // PFS - IS31FL3733B only
#endif
#ifndef ISSI_SWPULLUP
# define ISSI_SWPULLUP PUR_0R
#ifndef IS31FL3733_SWPULLUP
# define IS31FL3733_SWPULLUP IS31FL3733_PUR_0R
#endif
#ifndef ISSI_CSPULLUP
# define ISSI_CSPULLUP PUR_0R
#ifndef IS31FL3733_CSPULLUP
# define IS31FL3733_CSPULLUP IS31FL3733_PUR_0R
#endif
#ifndef ISSI_GLOBALCURRENT
# define ISSI_GLOBALCURRENT 0xFF
#ifndef IS31FL3733_GLOBALCURRENT
# define IS31FL3733_GLOBALCURRENT 0xFF
#endif
// Transfer buffer for TWITransmitData()
@ -83,34 +84,34 @@ uint8_t g_twi_transfer_buffer[20];
// We could optimize this and take out the unused registers from these
// buffers and the transfers in is31fl3733_write_pwm_buffer() but it's
// probably not worth the extra complexity.
uint8_t g_pwm_buffer[LED_DRIVER_COUNT][192];
bool g_pwm_buffer_update_required[LED_DRIVER_COUNT] = {false};
uint8_t g_pwm_buffer[IS31FL3733_DRIVER_COUNT][192];
bool g_pwm_buffer_update_required[IS31FL3733_DRIVER_COUNT] = {false};
/* There's probably a better way to init this... */
#if LED_DRIVER_COUNT == 1
uint8_t g_led_control_registers[LED_DRIVER_COUNT][24] = {{0}};
#elif LED_DRIVER_COUNT == 2
uint8_t g_led_control_registers[LED_DRIVER_COUNT][24] = {{0}, {0}};
#elif LED_DRIVER_COUNT == 3
uint8_t g_led_control_registers[LED_DRIVER_COUNT][24] = {{0}, {0}, {0}};
#elif LED_DRIVER_COUNT == 4
uint8_t g_led_control_registers[LED_DRIVER_COUNT][24] = {{0}, {0}, {0}, {0}};
#if IS31FL3733_DRIVER_COUNT == 1
uint8_t g_led_control_registers[IS31FL3733_DRIVER_COUNT][24] = {{0}};
#elif IS31FL3733_DRIVER_COUNT == 2
uint8_t g_led_control_registers[IS31FL3733_DRIVER_COUNT][24] = {{0}, {0}};
#elif IS31FL3733_DRIVER_COUNT == 3
uint8_t g_led_control_registers[IS31FL3733_DRIVER_COUNT][24] = {{0}, {0}, {0}};
#elif IS31FL3733_DRIVER_COUNT == 4
uint8_t g_led_control_registers[IS31FL3733_DRIVER_COUNT][24] = {{0}, {0}, {0}, {0}};
#endif
bool g_led_control_registers_update_required[LED_DRIVER_COUNT] = {false};
bool g_led_control_registers_update_required[IS31FL3733_DRIVER_COUNT] = {false};
bool is31fl3733_write_register(uint8_t addr, uint8_t reg, uint8_t data) {
// If the transaction fails function returns false.
g_twi_transfer_buffer[0] = reg;
g_twi_transfer_buffer[1] = data;
#if ISSI_PERSISTENCE > 0
for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) != 0) {
#if IS31FL3733_I2C_PERSISTENCE > 0
for (uint8_t i = 0; i < IS31FL3733_I2C_PERSISTENCE; i++) {
if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, IS31FL3733_I2C_TIMEOUT) != 0) {
return false;
}
}
#else
if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) != 0) {
if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, IS31FL3733_I2C_TIMEOUT) != 0) {
return false;
}
#endif
@ -131,14 +132,14 @@ bool is31fl3733_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer) {
// Thus this sets registers 0x00-0x0F, 0x10-0x1F, etc. in one transfer.
memcpy(g_twi_transfer_buffer + 1, pwm_buffer + i, 16);
#if ISSI_PERSISTENCE > 0
for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT) != 0) {
#if IS31FL3733_I2C_PERSISTENCE > 0
for (uint8_t i = 0; i < IS31FL3733_I2C_PERSISTENCE; i++) {
if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, IS31FL3733_I2C_TIMEOUT) != 0) {
return false;
}
}
#else
if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT) != 0) {
if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, IS31FL3733_I2C_TIMEOUT) != 0) {
return false;
}
#endif
@ -154,20 +155,20 @@ void is31fl3733_init(uint8_t addr, uint8_t sync) {
// Sync is passed so set it according to the datasheet.
// Unlock the command register.
is31fl3733_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
is31fl3733_write_register(addr, IS31FL3733_COMMANDREGISTER_WRITELOCK, 0xC5);
// Select PG0
is31fl3733_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL);
is31fl3733_write_register(addr, IS31FL3733_COMMANDREGISTER, IS31FL3733_PAGE_LEDCONTROL);
// Turn off all LEDs.
for (int i = 0x00; i <= 0x17; i++) {
is31fl3733_write_register(addr, i, 0x00);
}
// Unlock the command register.
is31fl3733_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
is31fl3733_write_register(addr, IS31FL3733_COMMANDREGISTER_WRITELOCK, 0xC5);
// Select PG1
is31fl3733_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM);
is31fl3733_write_register(addr, IS31FL3733_COMMANDREGISTER, IS31FL3733_PAGE_PWM);
// Set PWM on all LEDs to 0
// No need to setup Breath registers to PWM as that is the default.
for (int i = 0x00; i <= 0xBF; i++) {
@ -175,18 +176,18 @@ void is31fl3733_init(uint8_t addr, uint8_t sync) {
}
// Unlock the command register.
is31fl3733_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
is31fl3733_write_register(addr, IS31FL3733_COMMANDREGISTER_WRITELOCK, 0xC5);
// Select PG3
is31fl3733_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_FUNCTION);
is31fl3733_write_register(addr, IS31FL3733_COMMANDREGISTER, IS31FL3733_PAGE_FUNCTION);
// Set de-ghost pull-up resistors (SWx)
is31fl3733_write_register(addr, ISSI_REG_SWPULLUP, ISSI_SWPULLUP);
is31fl3733_write_register(addr, IS31FL3733_REG_SWPULLUP, IS31FL3733_SWPULLUP);
// Set de-ghost pull-down resistors (CSx)
is31fl3733_write_register(addr, ISSI_REG_CSPULLUP, ISSI_CSPULLUP);
is31fl3733_write_register(addr, IS31FL3733_REG_CSPULLUP, IS31FL3733_CSPULLUP);
// Set global current to maximum.
is31fl3733_write_register(addr, ISSI_REG_GLOBALCURRENT, ISSI_GLOBALCURRENT);
is31fl3733_write_register(addr, IS31FL3733_REG_GLOBALCURRENT, IS31FL3733_GLOBALCURRENT);
// Disable software shutdown.
is31fl3733_write_register(addr, ISSI_REG_CONFIGURATION, ((sync & 0b11) << 6) | ((ISSI_PWM_FREQUENCY & 0b111) << 3) | 0x01);
is31fl3733_write_register(addr, IS31FL3733_REG_CONFIGURATION, ((sync & 0b11) << 6) | ((IS31FL3733_PWM_FREQUENCY & 0b111) << 3) | 0x01);
// Wait 10ms to ensure the device has woken up.
wait_ms(10);
@ -230,8 +231,8 @@ void is31fl3733_set_led_control_register(uint8_t index, bool value) {
void is31fl3733_update_pwm_buffers(uint8_t addr, uint8_t index) {
if (g_pwm_buffer_update_required[index]) {
// Firstly we need to unlock the command register and select PG1.
is31fl3733_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
is31fl3733_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM);
is31fl3733_write_register(addr, IS31FL3733_COMMANDREGISTER_WRITELOCK, 0xC5);
is31fl3733_write_register(addr, IS31FL3733_COMMANDREGISTER, IS31FL3733_PAGE_PWM);
// If any of the transactions fail we risk writing dirty PG0,
// refresh page 0 just in case.
@ -245,8 +246,8 @@ void is31fl3733_update_pwm_buffers(uint8_t addr, uint8_t index) {
void is31fl3733_update_led_control_registers(uint8_t addr, uint8_t index) {
if (g_led_control_registers_update_required[index]) {
// Firstly we need to unlock the command register and select PG0
is31fl3733_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
is31fl3733_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL);
is31fl3733_write_register(addr, IS31FL3733_COMMANDREGISTER_WRITELOCK, 0xC5);
is31fl3733_write_register(addr, IS31FL3733_COMMANDREGISTER, IS31FL3733_PAGE_LEDCONTROL);
for (int i = 0; i < 24; i++) {
is31fl3733_write_register(addr, i, g_led_control_registers[index][i]);
}

View file

@ -22,9 +22,40 @@
#include <stdint.h>
#include <stdbool.h>
#include <string.h>
#include "progmem.h"
// ======== DEPRECATED DEFINES - DO NOT USE ========
#ifdef LED_DRIVER_COUNT
# define IS31FL3733_DRIVER_COUNT LED_DRIVER_COUNT
#endif
#ifdef ISSI_TIMEOUT
# define IS31FL3733_I2C_TIMEOUT ISSI_TIMEOUT
#endif
#ifdef ISSI_PERSISTENCE
# define IS31FL3733_I2C_PERSISTENCE ISSI_PERSISTENCE
#endif
#ifdef ISSI_PWM_FREQUENCY
# define IS31FL3733_PWM_FREQUENCY ISSI_PWM_FREQUENCY
#endif
#ifdef ISSI_SWPULLUP
# define IS31FL3733_SWPULLUP ISSI_SWPULLUP
#endif
#ifdef ISSI_CSPULLUP
# define IS31FL3733_CSPULLUP ISSI_CSPULLUP
#endif
#ifdef ISSI_GLOBALCURRENT
# define IS31FL3733_GLOBALCURRENT ISSI_GLOBALCURRENT
#endif
#define PUR_0R IS31FL3733_PUR_0R
#define PUR_05KR IS31FL3733_PUR_05KR
#define PUR_3KR IS31FL3733_PUR_3KR
#define PUR_4KR IS31FL3733_PUR_4KR
#define PUR_8KR IS31FL3733_PUR_8KR
#define PUR_16KR IS31FL3733_PUR_16KR
#define PUR_32KR IS31FL3733_PUR_32KR
// ========
typedef struct is31_led {
uint8_t driver : 2;
uint8_t v;
@ -48,13 +79,13 @@ void is31fl3733_set_led_control_register(uint8_t index, bool value);
void is31fl3733_update_pwm_buffers(uint8_t addr, uint8_t index);
void is31fl3733_update_led_control_registers(uint8_t addr, uint8_t index);
#define PUR_0R 0x00 // No PUR resistor
#define PUR_05KR 0x02 // 0.5k Ohm resistor in t_NOL
#define PUR_3KR 0x03 // 3.0k Ohm resistor on all the time
#define PUR_4KR 0x04 // 4.0k Ohm resistor on all the time
#define PUR_8KR 0x05 // 8.0k Ohm resistor on all the time
#define PUR_16KR 0x06 // 16k Ohm resistor on all the time
#define PUR_32KR 0x07 // 32k Ohm resistor in t_NOL
#define IS31FL3733_PUR_0R 0x00 // No PUR resistor
#define IS31FL3733_PUR_05KR 0x02 // 0.5k Ohm resistor in t_NOL
#define IS31FL3733_PUR_3KR 0x03 // 3.0k Ohm resistor on all the time
#define IS31FL3733_PUR_4KR 0x04 // 4.0k Ohm resistor on all the time
#define IS31FL3733_PUR_8KR 0x05 // 8.0k Ohm resistor on all the time
#define IS31FL3733_PUR_16KR 0x06 // 16k Ohm resistor on all the time
#define IS31FL3733_PUR_32KR 0x07 // 32k Ohm resistor in t_NOL
#define A_1 0x00
#define A_2 0x01

View file

@ -18,6 +18,7 @@
*/
#include "is31fl3733.h"
#include <string.h>
#include "i2c_master.h"
#include "wait.h"
@ -31,46 +32,46 @@
// ADDR1 represents A1:A0 of the 7-bit address.
// ADDR2 represents A3:A2 of the 7-bit address.
// The result is: 0b101(ADDR2)(ADDR1)
#define ISSI_ADDR_DEFAULT 0x50
#define IS31FL3733_I2C_ADDRESS_DEFAULT 0x50
#define ISSI_COMMANDREGISTER 0xFD
#define ISSI_COMMANDREGISTER_WRITELOCK 0xFE
#define ISSI_INTERRUPTMASKREGISTER 0xF0
#define ISSI_INTERRUPTSTATUSREGISTER 0xF1
#define IS31FL3733_COMMANDREGISTER 0xFD
#define IS31FL3733_COMMANDREGISTER_WRITELOCK 0xFE
#define IS31FL3733_INTERRUPTMASKREGISTER 0xF0
#define IS31FL3733_INTERRUPTSTATUSREGISTER 0xF1
#define ISSI_PAGE_LEDCONTROL 0x00 // PG0
#define ISSI_PAGE_PWM 0x01 // PG1
#define ISSI_PAGE_AUTOBREATH 0x02 // PG2
#define ISSI_PAGE_FUNCTION 0x03 // PG3
#define IS31FL3733_PAGE_LEDCONTROL 0x00 // PG0
#define IS31FL3733_PAGE_PWM 0x01 // PG1
#define IS31FL3733_PAGE_AUTOBREATH 0x02 // PG2
#define IS31FL3733_PAGE_FUNCTION 0x03 // PG3
#define ISSI_REG_CONFIGURATION 0x00 // PG3
#define ISSI_REG_GLOBALCURRENT 0x01 // PG3
#define ISSI_REG_RESET 0x11 // PG3
#define ISSI_REG_SWPULLUP 0x0F // PG3
#define ISSI_REG_CSPULLUP 0x10 // PG3
#define IS31FL3733_REG_CONFIGURATION 0x00 // PG3
#define IS31FL3733_REG_GLOBALCURRENT 0x01 // PG3
#define IS31FL3733_REG_RESET 0x11 // PG3
#define IS31FL3733_REG_SWPULLUP 0x0F // PG3
#define IS31FL3733_REG_CSPULLUP 0x10 // PG3
#ifndef ISSI_TIMEOUT
# define ISSI_TIMEOUT 100
#ifndef IS31FL3733_I2C_TIMEOUT
# define IS31FL3733_I2C_TIMEOUT 100
#endif
#ifndef ISSI_PERSISTENCE
# define ISSI_PERSISTENCE 0
#ifndef IS31FL3733_I2C_PERSISTENCE
# define IS31FL3733_I2C_PERSISTENCE 0
#endif
#ifndef ISSI_PWM_FREQUENCY
# define ISSI_PWM_FREQUENCY 0b000 // PFS - IS31FL3733B only
#ifndef IS31FL3733_PWM_FREQUENCY
# define IS31FL3733_PWM_FREQUENCY 0b000 // PFS - IS31FL3733B only
#endif
#ifndef ISSI_SWPULLUP
# define ISSI_SWPULLUP PUR_0R
#ifndef IS31FL3733_SWPULLUP
# define IS31FL3733_SWPULLUP IS31FL3733_PUR_0R
#endif
#ifndef ISSI_CSPULLUP
# define ISSI_CSPULLUP PUR_0R
#ifndef IS31FL3733_CSPULLUP
# define IS31FL3733_CSPULLUP IS31FL3733_PUR_0R
#endif
#ifndef ISSI_GLOBALCURRENT
# define ISSI_GLOBALCURRENT 0xFF
#ifndef IS31FL3733_GLOBALCURRENT
# define IS31FL3733_GLOBALCURRENT 0xFF
#endif
// Transfer buffer for TWITransmitData()
@ -82,25 +83,25 @@ uint8_t g_twi_transfer_buffer[20];
// We could optimize this and take out the unused registers from these
// buffers and the transfers in is31fl3733_write_pwm_buffer() but it's
// probably not worth the extra complexity.
uint8_t g_pwm_buffer[DRIVER_COUNT][192];
bool g_pwm_buffer_update_required[DRIVER_COUNT] = {false};
uint8_t g_pwm_buffer[IS31FL3733_DRIVER_COUNT][192];
bool g_pwm_buffer_update_required[IS31FL3733_DRIVER_COUNT] = {false};
uint8_t g_led_control_registers[DRIVER_COUNT][24] = {0};
bool g_led_control_registers_update_required[DRIVER_COUNT] = {false};
uint8_t g_led_control_registers[IS31FL3733_DRIVER_COUNT][24] = {0};
bool g_led_control_registers_update_required[IS31FL3733_DRIVER_COUNT] = {false};
bool is31fl3733_write_register(uint8_t addr, uint8_t reg, uint8_t data) {
// If the transaction fails function returns false.
g_twi_transfer_buffer[0] = reg;
g_twi_transfer_buffer[1] = data;
#if ISSI_PERSISTENCE > 0
for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) != 0) {
#if IS31FL3733_I2C_PERSISTENCE > 0
for (uint8_t i = 0; i < IS31FL3733_I2C_PERSISTENCE; i++) {
if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, IS31FL3733_I2C_TIMEOUT) != 0) {
return false;
}
}
#else
if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) != 0) {
if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, IS31FL3733_I2C_TIMEOUT) != 0) {
return false;
}
#endif
@ -119,18 +120,16 @@ bool is31fl3733_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer) {
// Copy the data from i to i+15.
// Device will auto-increment register for data after the first byte
// Thus this sets registers 0x00-0x0F, 0x10-0x1F, etc. in one transfer.
for (int j = 0; j < 16; j++) {
g_twi_transfer_buffer[1 + j] = pwm_buffer[i + j];
}
memcpy(g_twi_transfer_buffer + 1, pwm_buffer + i, 16);
#if ISSI_PERSISTENCE > 0
for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT) != 0) {
#if IS31FL3733_I2C_PERSISTENCE > 0
for (uint8_t i = 0; i < IS31FL3733_I2C_PERSISTENCE; i++) {
if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, IS31FL3733_I2C_TIMEOUT) != 0) {
return false;
}
}
#else
if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT) != 0) {
if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, IS31FL3733_I2C_TIMEOUT) != 0) {
return false;
}
#endif
@ -146,20 +145,20 @@ void is31fl3733_init(uint8_t addr, uint8_t sync) {
// Sync is passed so set it according to the datasheet.
// Unlock the command register.
is31fl3733_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
is31fl3733_write_register(addr, IS31FL3733_COMMANDREGISTER_WRITELOCK, 0xC5);
// Select PG0
is31fl3733_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL);
is31fl3733_write_register(addr, IS31FL3733_COMMANDREGISTER, IS31FL3733_PAGE_LEDCONTROL);
// Turn off all LEDs.
for (int i = 0x00; i <= 0x17; i++) {
is31fl3733_write_register(addr, i, 0x00);
}
// Unlock the command register.
is31fl3733_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
is31fl3733_write_register(addr, IS31FL3733_COMMANDREGISTER_WRITELOCK, 0xC5);
// Select PG1
is31fl3733_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM);
is31fl3733_write_register(addr, IS31FL3733_COMMANDREGISTER, IS31FL3733_PAGE_PWM);
// Set PWM on all LEDs to 0
// No need to setup Breath registers to PWM as that is the default.
for (int i = 0x00; i <= 0xBF; i++) {
@ -167,18 +166,18 @@ void is31fl3733_init(uint8_t addr, uint8_t sync) {
}
// Unlock the command register.
is31fl3733_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
is31fl3733_write_register(addr, IS31FL3733_COMMANDREGISTER_WRITELOCK, 0xC5);
// Select PG3
is31fl3733_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_FUNCTION);
is31fl3733_write_register(addr, IS31FL3733_COMMANDREGISTER, IS31FL3733_PAGE_FUNCTION);
// Set de-ghost pull-up resistors (SWx)
is31fl3733_write_register(addr, ISSI_REG_SWPULLUP, ISSI_SWPULLUP);
is31fl3733_write_register(addr, IS31FL3733_REG_SWPULLUP, IS31FL3733_SWPULLUP);
// Set de-ghost pull-down resistors (CSx)
is31fl3733_write_register(addr, ISSI_REG_CSPULLUP, ISSI_CSPULLUP);
is31fl3733_write_register(addr, IS31FL3733_REG_CSPULLUP, IS31FL3733_CSPULLUP);
// Set global current to maximum.
is31fl3733_write_register(addr, ISSI_REG_GLOBALCURRENT, ISSI_GLOBALCURRENT);
is31fl3733_write_register(addr, IS31FL3733_REG_GLOBALCURRENT, IS31FL3733_GLOBALCURRENT);
// Disable software shutdown.
is31fl3733_write_register(addr, ISSI_REG_CONFIGURATION, ((sync & 0b11) << 6) | ((ISSI_PWM_FREQUENCY & 0b111) << 3) | 0x01);
is31fl3733_write_register(addr, IS31FL3733_REG_CONFIGURATION, ((sync & 0b11) << 6) | ((IS31FL3733_PWM_FREQUENCY & 0b111) << 3) | 0x01);
// Wait 10ms to ensure the device has woken up.
wait_ms(10);
@ -238,26 +237,26 @@ void is31fl3733_set_led_control_register(uint8_t index, bool red, bool green, bo
void is31fl3733_update_pwm_buffers(uint8_t addr, uint8_t index) {
if (g_pwm_buffer_update_required[index]) {
// Firstly we need to unlock the command register and select PG1.
is31fl3733_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
is31fl3733_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM);
is31fl3733_write_register(addr, IS31FL3733_COMMANDREGISTER_WRITELOCK, 0xC5);
is31fl3733_write_register(addr, IS31FL3733_COMMANDREGISTER, IS31FL3733_PAGE_PWM);
// If any of the transactions fail we risk writing dirty PG0,
// refresh page 0 just in case.
if (!is31fl3733_write_pwm_buffer(addr, g_pwm_buffer[index])) {
g_led_control_registers_update_required[index] = true;
}
g_pwm_buffer_update_required[index] = false;
}
g_pwm_buffer_update_required[index] = false;
}
void is31fl3733_update_led_control_registers(uint8_t addr, uint8_t index) {
if (g_led_control_registers_update_required[index]) {
// Firstly we need to unlock the command register and select PG0
is31fl3733_write_register(addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
is31fl3733_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL);
is31fl3733_write_register(addr, IS31FL3733_COMMANDREGISTER_WRITELOCK, 0xC5);
is31fl3733_write_register(addr, IS31FL3733_COMMANDREGISTER, IS31FL3733_PAGE_LEDCONTROL);
for (int i = 0; i < 24; i++) {
is31fl3733_write_register(addr, i, g_led_control_registers[index][i]);
}
g_led_control_registers_update_required[index] = false;
}
g_led_control_registers_update_required[index] = false;
}

View file

@ -23,6 +23,38 @@
#include <stdbool.h>
#include "progmem.h"
// ======== DEPRECATED DEFINES - DO NOT USE ========
#ifdef DRIVER_COUNT
# define IS31FL3733_DRIVER_COUNT DRIVER_COUNT
#endif
#ifdef ISSI_TIMEOUT
# define IS31FL3733_I2C_TIMEOUT ISSI_TIMEOUT
#endif
#ifdef ISSI_PERSISTENCE
# define IS31FL3733_I2C_PERSISTENCE ISSI_PERSISTENCE
#endif
#ifdef ISSI_PWM_FREQUENCY
# define IS31FL3733_PWM_FREQUENCY ISSI_PWM_FREQUENCY
#endif
#ifdef ISSI_SWPULLUP
# define IS31FL3733_SWPULLUP ISSI_SWPULLUP
#endif
#ifdef ISSI_CSPULLUP
# define IS31FL3733_CSPULLUP ISSI_CSPULLUP
#endif
#ifdef ISSI_GLOBALCURRENT
# define IS31FL3733_GLOBALCURRENT ISSI_GLOBALCURRENT
#endif
#define PUR_0R IS31FL3733_PUR_0R
#define PUR_05KR IS31FL3733_PUR_05KR
#define PUR_3KR IS31FL3733_PUR_3KR
#define PUR_4KR IS31FL3733_PUR_4KR
#define PUR_8KR IS31FL3733_PUR_8KR
#define PUR_16KR IS31FL3733_PUR_16KR
#define PUR_32KR IS31FL3733_PUR_32KR
// ========
typedef struct is31_led {
uint8_t driver : 2;
uint8_t r;
@ -48,13 +80,13 @@ void is31fl3733_set_led_control_register(uint8_t index, bool red, bool green, bo
void is31fl3733_update_pwm_buffers(uint8_t addr, uint8_t index);
void is31fl3733_update_led_control_registers(uint8_t addr, uint8_t index);
#define PUR_0R 0x00 // No PUR resistor
#define PUR_05KR 0x02 // 0.5k Ohm resistor in t_NOL
#define PUR_3KR 0x03 // 3.0k Ohm resistor on all the time
#define PUR_4KR 0x04 // 4.0k Ohm resistor on all the time
#define PUR_8KR 0x05 // 8.0k Ohm resistor on all the time
#define PUR_16KR 0x06 // 16k Ohm resistor on all the time
#define PUR_32KR 0x07 // 32k Ohm resistor in t_NOL
#define IS31FL3733_PUR_0R 0x00 // No PUR resistor
#define IS31FL3733_PUR_05KR 0x02 // 0.5k Ohm resistor in t_NOL
#define IS31FL3733_PUR_3KR 0x03 // 3.0k Ohm resistor on all the time
#define IS31FL3733_PUR_4KR 0x04 // 4.0k Ohm resistor on all the time
#define IS31FL3733_PUR_8KR 0x05 // 8.0k Ohm resistor on all the time
#define IS31FL3733_PUR_16KR 0x06 // 16k Ohm resistor on all the time
#define IS31FL3733_PUR_32KR 0x07 // 32k Ohm resistor in t_NOL
#define A_1 0x00
#define A_2 0x01

View file

@ -22,9 +22,9 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define LOCKING_RESYNC_ENABLE
#define DRIVER_ADDR_1 0b1010000
#define DRIVER_COUNT 1
#define IS31FL3733_DRIVER_COUNT 1
#define RGB_MATRIX_LED_COUNT 62
#define ISSI_PWM_FREQUENCY 0b010
#define IS31FL3733_PWM_FREQUENCY 0b010
#define RGB_MATRIX_DEFAULT_VAL 80
#define RGB_MATRIX_KEYPRESSES

View file

@ -20,7 +20,7 @@
#define DRIVER_ADDR_1 0b1010000
#define DRIVER_ADDR_2 0b1010011
#define DRIVER_COUNT 2
#define IS31FL3733_DRIVER_COUNT 2
#define DRIVER_1_LED_TOTAL 45
#define DRIVER_2_LED_TOTAL 45

View file

@ -38,7 +38,7 @@
#define WEAR_LEVELING_BACKING_SIZE (8 * 1024)
/* I2C Config for LED Driver */
#define DRIVER_COUNT 2
#define IS31FL3733_DRIVER_COUNT 2
#define DRIVER_ADDR_1 0b1110100
#define DRIVER_ADDR_2 0b1110111
#define I2C1_SCL_PAL_MODE 4

View file

@ -35,7 +35,7 @@
#define WEAR_LEVELING_BACKING_SIZE (8 * 1024)
/* I2C Config for LED Driver */
#define DRIVER_COUNT 3
#define IS31FL3733_DRIVER_COUNT 3
#define DRIVER_ADDR_1 0b1110100
#define DRIVER_ADDR_2 0b1110111
#define DRIVER_ADDR_3 0b1110110

View file

@ -35,7 +35,7 @@
#define WEAR_LEVELING_BACKING_SIZE (8 * 1024)
/* I2C Config for LED Driver */
#define DRIVER_COUNT 2
#define IS31FL3733_DRIVER_COUNT 2
#define DRIVER_ADDR_1 0b1110100
#define DRIVER_ADDR_2 0b1110111
#define I2C1_SCL_PAL_MODE 4

View file

@ -62,6 +62,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define RGB_MATRIX_LED_FLUSH_LIMIT 16 // 16 is equivalent to limiting to 60fps
# define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
# define DRIVER_ADDR_1 0b1010000
# define DRIVER_COUNT 1
# define IS31FL3733_DRIVER_COUNT 1
# define RGB_MATRIX_LED_COUNT 64
#endif

View file

@ -34,6 +34,6 @@
# define DISABLE_RGB_MATRIX_SOLID_SPLASH
# define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH
# define DRIVER_ADDR_1 0b1010000
# define DRIVER_COUNT 1
# define IS31FL3733_DRIVER_COUNT 1
# define RGB_MATRIX_LED_COUNT 63
#endif

View file

@ -35,7 +35,7 @@
#define WEAR_LEVELING_BACKING_SIZE (8 * 1024)
/* I2C Config for LED Driver */
#define DRIVER_COUNT 2
#define IS31FL3733_DRIVER_COUNT 2
#define DRIVER_ADDR_1 0b1110100
#define DRIVER_ADDR_2 0b1110111
#define I2C1_OPMODE OPMODE_I2C

View file

@ -16,9 +16,9 @@
#define DRIVER_ADDR_1 0b1010011
#define DRIVER_ADDR_2 0b1011111
#define DRIVER_COUNT 2
#define IS31FL3733_DRIVER_COUNT 2
#define RGB_MATRIX_LED_COUNT 111
#define ISSI_PWM_FREQUENCY 0b010 // 26k
#define IS31FL3733_PWM_FREQUENCY 0b010 // 26k
#define RGB_DISABLE_WHEN_USB_SUSPENDED
#define RGB_MATRIX_DEFAULT_VAL 100

View file

@ -16,9 +16,9 @@
#define DRIVER_ADDR_1 0b1010011
#define DRIVER_ADDR_2 0b1011111
#define DRIVER_COUNT 2
#define IS31FL3733_DRIVER_COUNT 2
#define RGB_MATRIX_LED_COUNT 119
#define ISSI_PWM_FREQUENCY 0b010 // 26k
#define IS31FL3733_PWM_FREQUENCY 0b010 // 26k
#define RGB_DISABLE_WHEN_USB_SUSPENDED
#define RGB_MATRIX_DEFAULT_VAL 100

View file

@ -11,9 +11,9 @@
#define DRIVER_ADDR_1 0b1010000
#define DRIVER_ADDR_2 0b1011111
#define DRIVER_COUNT 2
#define IS31FL3733_DRIVER_COUNT 2
#define RGB_MATRIX_LED_COUNT 111
#define ISSI_PWM_FREQUENCY 0b010 // 26k
#define IS31FL3733_PWM_FREQUENCY 0b010 // 26k
#define RGB_DISABLE_WHEN_USB_SUSPENDED
#define RGB_MATRIX_KEYPRESSES

View file

@ -17,9 +17,9 @@
#define DRIVER_ADDR_1 0b1010011
#define DRIVER_ADDR_2 0b1011111
#define DRIVER_ADDR_3 0b1010000
#define DRIVER_COUNT 3
#define IS31FL3733_DRIVER_COUNT 3
#define RGB_MATRIX_LED_COUNT 166
#define ISSI_PWM_FREQUENCY 0b010 // 26k
#define IS31FL3733_PWM_FREQUENCY 0b010 // 26k
#define RGB_DISABLE_WHEN_USB_SUSPENDED
#define RGB_MATRIX_DEFAULT_VAL 100

View file

@ -48,7 +48,7 @@
#define DRIVER_ADDR_1 0b1010000
#define DRIVER_ADDR_2 0b1010011
#define DRIVER_COUNT 2
#define IS31FL3733_DRIVER_COUNT 2
#define RGB_MATRIX_LED_COUNT (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)
/* I2C Alternate function settings */

View file

@ -56,6 +56,6 @@
# define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_ALL
# define DRIVER_ADDR_1 0b1010000
# define DRIVER_COUNT 1
# define IS31FL3733_DRIVER_COUNT 1
# define RGB_MATRIX_LED_COUNT 63
#endif

View file

@ -54,6 +54,6 @@
// # define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
# define DRIVER_ADDR_1 0b1010000
# define DRIVER_COUNT 1
# define IS31FL3733_DRIVER_COUNT 1
# define RGB_MATRIX_LED_COUNT 63
#endif

View file

@ -70,6 +70,6 @@
// # define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
# define DRIVER_ADDR_1 0b1010000
# define DRIVER_COUNT 1
# define IS31FL3733_DRIVER_COUNT 1
# define RGB_MATRIX_LED_COUNT 63
#endif

View file

@ -56,6 +56,6 @@
# define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_ALL
# define DRIVER_ADDR_1 0b1010000
# define DRIVER_COUNT 1
# define IS31FL3733_DRIVER_COUNT 1
# define RGB_MATRIX_LED_COUNT 61
#endif

View file

@ -54,6 +54,6 @@
// # define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
# define DRIVER_ADDR_1 0b1010000
# define DRIVER_COUNT 1
# define IS31FL3733_DRIVER_COUNT 1
# define RGB_MATRIX_LED_COUNT 61
#endif

View file

@ -70,6 +70,6 @@
// # define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
# define DRIVER_ADDR_1 0b1010000
# define DRIVER_COUNT 1
# define IS31FL3733_DRIVER_COUNT 1
# define RGB_MATRIX_LED_COUNT 61
#endif

View file

@ -56,6 +56,6 @@
# define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_ALL
# define DRIVER_ADDR_1 0b1010000
# define DRIVER_COUNT 1
# define IS31FL3733_DRIVER_COUNT 1
# define RGB_MATRIX_LED_COUNT 62
#endif

View file

@ -51,6 +51,6 @@
// # define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
# define DRIVER_ADDR_1 0b1010000
# define DRIVER_COUNT 1
# define IS31FL3733_DRIVER_COUNT 1
# define RGB_MATRIX_LED_COUNT 62
#endif

View file

@ -70,6 +70,6 @@
// # define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
# define DRIVER_ADDR_1 0b1010000
# define DRIVER_COUNT 1
# define IS31FL3733_DRIVER_COUNT 1
# define RGB_MATRIX_LED_COUNT 62
#endif

View file

@ -49,7 +49,7 @@
#define ENABLE_RGB_MATRIX_TYPING_HEATMAP
#define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_ALL
#define DRIVER_ADDR_1 0b1010000
#define DRIVER_COUNT 1
#define IS31FL3733_DRIVER_COUNT 1
#define RGB_MATRIX_LED_COUNT 64
#endif
#define VIA_EEPROM_LAYOUT_OPTIONS_SIZE 2

View file

@ -49,7 +49,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
// ADDR2 represents A3:A2 of the 7-bit address.
// The result is: 0b101(ADDR2)(ADDR1)
#define DRIVER_ADDR_1 0b1010000
#define DRIVER_COUNT 1
#define IS31FL3733_DRIVER_COUNT 1
#define RGB_MATRIX_LED_COUNT 64
// RGB Matrix Animation modes. Explicitly enabled

View file

@ -6,5 +6,5 @@
#define DRIVER_ADDR_1 0b1010000
#define DRIVER_COUNT 1
#define IS31FL3733_DRIVER_COUNT 1
#define RGB_MATRIX_LED_COUNT 63

View file

@ -27,7 +27,7 @@
/* RGB Matrix config */
#define DRIVER_ADDR_1 0b1011111
#define DRIVER_ADDR_2 0b1010000
#define DRIVER_COUNT 2
#define IS31FL3733_DRIVER_COUNT 2
#define DRIVER_1_LED_TOTAL 63
#define DRIVER_2_LED_TOTAL 64

View file

@ -73,6 +73,6 @@
// # define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
# define DRIVER_ADDR_1 0b1010000
# define DRIVER_COUNT 1
# define IS31FL3733_DRIVER_COUNT 1
# define RGB_MATRIX_LED_COUNT 62
#endif

View file

@ -53,7 +53,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGB_BACKLIGHT_COLOR_1 { .h = 0, .s = 255 }
#define RGB_BACKLIGHT_COLOR_2 { .h = 127, .s = 255 }
#define DRIVER_COUNT 2
#define IS31FL3733_DRIVER_COUNT 2
#define RGB_MATRIX_LED_COUNT 64
// These define which keys in the matrix are alphas/mods

View file

@ -53,7 +53,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGB_BACKLIGHT_COLOR_1 { .h = 0, .s = 255 }
#define RGB_BACKLIGHT_COLOR_2 { .h = 127, .s = 255 }
#define DRIVER_COUNT 2
#define IS31FL3733_DRIVER_COUNT 2
#define RGB_MATRIX_LED_COUNT 64
// These define which keys in the matrix are alphas/mods

View file

@ -50,7 +50,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGB_BACKLIGHT_COLOR_1 { .h = 0, .s = 255 }
#define RGB_BACKLIGHT_COLOR_2 { .h = 127, .s = 255 }
#define DRIVER_COUNT 2
#define IS31FL3733_DRIVER_COUNT 2
#define RGB_MATRIX_LED_COUNT 64
// These define which keys in the matrix are alphas/mods

View file

@ -39,7 +39,7 @@
#define WEAR_LEVELING_BACKING_SIZE (8 * 1024)
/* I2C Config for LED Driver */
#define DRIVER_COUNT 2
#define IS31FL3733_DRIVER_COUNT 2
#define DRIVER_ADDR_1 0b1110100
#define DRIVER_ADDR_2 0b1110111
#define I2C1_SDA_PIN B7

View file

@ -26,7 +26,7 @@
#define WEAR_LEVELING_BACKING_SIZE (4 * 1024)
/* I2C Config for LED Driver */
#define DRIVER_COUNT 1
#define IS31FL3733_DRIVER_COUNT 1
#define DRIVER_ADDR_1 0b1110100
/* WB32 MCU has no default definition */
#define I2C1_OPMODE OPMODE_I2C

View file

@ -105,7 +105,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define DRIVER_ADDR_1 0b1010000
# define DRIVER_ADDR_2 0b1010000
# define DRIVER_COUNT 2
# define IS31FL3733_DRIVER_COUNT 2
# define DRIVER_1_LED_TOTAL 64
# define DRIVER_2_LED_TOTAL 55
# define RGB_MATRIX_LED_COUNT (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)

View file

@ -16,8 +16,6 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifdef RGB_MATRIX_ENABLE
#include "is31fl3733-dual.h"
#include "i2c_master.h"
#include "wait.h"
@ -32,30 +30,46 @@
// ADDR1 represents A1:A0 of the 7-bit address.
// ADDR2 represents A3:A2 of the 7-bit address.
// The result is: 0b101(ADDR2)(ADDR1)
#define ISSI_ADDR_DEFAULT 0x50
#define IS31FL3733_I2C_ADDRESS_DEFAULT 0x50
#define ISSI_COMMANDREGISTER 0xFD
#define ISSI_COMMANDREGISTER_WRITELOCK 0xFE
#define ISSI_INTERRUPTMASKREGISTER 0xF0
#define ISSI_INTERRUPTSTATUSREGISTER 0xF1
#define IS31FL3733_COMMANDREGISTER 0xFD
#define IS31FL3733_COMMANDREGISTER_WRITELOCK 0xFE
#define IS31FL3733_INTERRUPTMASKREGISTER 0xF0
#define IS31FL3733_INTERRUPTSTATUSREGISTER 0xF1
#define ISSI_PAGE_LEDCONTROL 0x00 // PG0
#define ISSI_PAGE_PWM 0x01 // PG1
#define ISSI_PAGE_AUTOBREATH 0x02 // PG2
#define ISSI_PAGE_FUNCTION 0x03 // PG3
#define IS31FL3733_PAGE_LEDCONTROL 0x00 // PG0
#define IS31FL3733_PAGE_PWM 0x01 // PG1
#define IS31FL3733_PAGE_AUTOBREATH 0x02 // PG2
#define IS31FL3733_PAGE_FUNCTION 0x03 // PG3
#define ISSI_REG_CONFIGURATION 0x00 // PG3
#define ISSI_REG_GLOBALCURRENT 0x01 // PG3
#define ISSI_REG_RESET 0x11 // PG3
#define ISSI_REG_SWPULLUP 0x0F // PG3
#define ISSI_REG_CSPULLUP 0x10 // PG3
#define IS31FL3733_REG_CONFIGURATION 0x00 // PG3
#define IS31FL3733_REG_GLOBALCURRENT 0x01 // PG3
#define IS31FL3733_REG_RESET 0x11 // PG3
#define IS31FL3733_REG_SWPULLUP 0x0F // PG3
#define IS31FL3733_REG_CSPULLUP 0x10 // PG3
#ifndef ISSI_TIMEOUT
# define ISSI_TIMEOUT 5000
#ifndef IS31FL3733_I2C_TIMEOUT
# define IS31FL3733_I2C_TIMEOUT 100
#endif
#ifndef ISSI_PERSISTENCE
# define ISSI_PERSISTENCE 0
#ifndef IS31FL3733_I2C_PERSISTENCE
# define IS31FL3733_I2C_PERSISTENCE 0
#endif
#ifndef IS31FL3733_PWM_FREQUENCY
# define IS31FL3733_PWM_FREQUENCY 0b000 // PFS - IS31FL3733B only
#endif
#ifndef IS31FL3733_SWPULLUP
# define IS31FL3733_SWPULLUP IS31FL3733_PUR_0R
#endif
#ifndef IS31FL3733_CSPULLUP
# define IS31FL3733_CSPULLUP IS31FL3733_PUR_0R
#endif
#ifndef IS31FL3733_GLOBALCURRENT
# define IS31FL3733_GLOBALCURRENT 0xFF
#endif
// Transfer buffer for TWITransmitData()
@ -67,25 +81,25 @@ uint8_t g_twi_transfer_buffer[20];
// We could optimize this and take out the unused registers from these
// buffers and the transfers in is31fl3733_write_pwm_buffer() but it's
// probably not worth the extra complexity.
uint8_t g_pwm_buffer[DRIVER_COUNT][192];
bool g_pwm_buffer_update_required[DRIVER_COUNT] = {false};
uint8_t g_pwm_buffer[IS31FL3733_DRIVER_COUNT][192];
bool g_pwm_buffer_update_required[IS31FL3733_DRIVER_COUNT] = {false};
uint8_t g_led_control_registers[DRIVER_COUNT][24] = {{0}, {0}};
bool g_led_control_registers_update_required[DRIVER_COUNT] = {false};
uint8_t g_led_control_registers[IS31FL3733_DRIVER_COUNT][24] = {{0}, {0}};
bool g_led_control_registers_update_required[IS31FL3733_DRIVER_COUNT] = {false};
bool is31fl3733_write_register(uint8_t index, uint8_t addr, uint8_t reg, uint8_t data) {
// If the transaction fails function returns false.
g_twi_transfer_buffer[0] = reg;
g_twi_transfer_buffer[1] = data;
#if ISSI_PERSISTENCE > 0
for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
if (i2c_transmit(index, addr << 1, g_twi_transfer_buffer, 2, TIME_US2I(ISSI_TIMEOUT)) != 0) {
#if IS31FL3733_I2C_PERSISTENCE > 0
for (uint8_t i = 0; i < IS31FL3733_I2C_PERSISTENCE; i++) {
if (i2c_transmit(index, addr << 1, g_twi_transfer_buffer, 2, IS31FL3733_I2C_TIMEOUT) != 0) {
return false;
}
}
#else
if (i2c_transmit(index, addr << 1, g_twi_transfer_buffer, 2, TIME_US2I(ISSI_TIMEOUT)) != 0) {
if (i2c_transmit(index, addr << 1, g_twi_transfer_buffer, 2, IS31FL3733_I2C_TIMEOUT) != 0) {
return false;
}
#endif
@ -108,14 +122,14 @@ bool is31fl3733_write_pwm_buffer(uint8_t index, uint8_t addr, uint8_t *pwm_buffe
g_twi_transfer_buffer[1 + j] = pwm_buffer[i + j];
}
#if ISSI_PERSISTENCE > 0
for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
if (i2c_transmit(index, addr << 1, g_twi_transfer_buffer, 17, TIME_US2I(ISSI_TIMEOUT)) != 0) {
#if IS31FL3733_I2C_PERSISTENCE > 0
for (uint8_t i = 0; i < IS31FL3733_I2C_PERSISTENCE; i++) {
if (i2c_transmit(index, addr << 1, g_twi_transfer_buffer, 17, IS31FL3733_I2C_TIMEOUT) != 0) {
return false;
}
}
#else
if (i2c_transmit(index, addr << 1, g_twi_transfer_buffer, 17, TIME_US2I(ISSI_TIMEOUT)) != 0) {
if (i2c_transmit(index, addr << 1, g_twi_transfer_buffer, 17, IS31FL3733_I2C_TIMEOUT) != 0) {
return false;
}
#endif
@ -131,38 +145,52 @@ void is31fl3733_init(uint8_t bus, uint8_t addr, uint8_t sync) {
// Sync is passed so set it according to the datasheet.
// Unlock the command register.
is31fl3733_write_register(bus, addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
is31fl3733_write_register(bus, addr, IS31FL3733_COMMANDREGISTER_WRITELOCK, 0xC5);
// Select PG0
is31fl3733_write_register(bus, addr, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL);
is31fl3733_write_register(bus, addr, IS31FL3733_COMMANDREGISTER, IS31FL3733_PAGE_LEDCONTROL);
// Turn off all LEDs.
for (int i = 0x00; i <= 0x17; i++) {
is31fl3733_write_register(bus, addr, i, 0x00);
}
// Unlock the command register.
is31fl3733_write_register(bus, addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
is31fl3733_write_register(bus, addr, IS31FL3733_COMMANDREGISTER_WRITELOCK, 0xC5);
// Select PG1
is31fl3733_write_register(bus, addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM);
is31fl3733_write_register(bus, addr, IS31FL3733_COMMANDREGISTER, IS31FL3733_PAGE_PWM);
// Set PWM on all LEDs to 0
// No need to setup Breath registers to PWM as that is the default.
for (int i = 0x00; i <= 0xBF; i++) {
is31fl3733_write_register(bus, addr, i, 0x00);
}
// Unlock the command register.
is31fl3733_write_register(bus, addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
is31fl3733_write_register(bus, addr, IS31FL3733_COMMANDREGISTER_WRITELOCK, 0xC5);
// Select PG3
is31fl3733_write_register(bus, addr, ISSI_COMMANDREGISTER, ISSI_PAGE_FUNCTION);
is31fl3733_write_register(bus, addr, IS31FL3733_COMMANDREGISTER, IS31FL3733_PAGE_FUNCTION);
// Set de-ghost pull-up resistors (SWx)
is31fl3733_write_register(bus, addr, IS31FL3733_REG_SWPULLUP, IS31FL3733_SWPULLUP);
// Set de-ghost pull-down resistors (CSx)
is31fl3733_write_register(bus, addr, IS31FL3733_REG_CSPULLUP, IS31FL3733_CSPULLUP);
// Set global current to maximum.
is31fl3733_write_register(bus, addr, ISSI_REG_GLOBALCURRENT, 0xFF);
is31fl3733_write_register(bus, addr, IS31FL3733_REG_GLOBALCURRENT, IS31FL3733_GLOBALCURRENT);
// Disable software shutdown.
is31fl3733_write_register(bus, addr, ISSI_REG_CONFIGURATION, (sync << 6) | 0x01);
is31fl3733_write_register(bus, addr, IS31FL3733_REG_CONFIGURATION, ((sync & 0b11) << 6) | ((IS31FL3733_PWM_FREQUENCY & 0b111) << 3) | 0x01);
// Wait 10ms to ensure the device has woken up.
wait_ms(10);
}
void is31fl3733_set_color(int index, uint8_t red, uint8_t green, uint8_t blue) {
is31_led led;
if (index >= 0 && index < RGB_MATRIX_LED_COUNT) {
is31_led led = g_is31_leds[index];
memcpy_P(&led, (&g_is31_leds[index]), sizeof(led));
if (g_pwm_buffer[led.driver][led.r] == red && g_pwm_buffer[led.driver][led.g] == green && g_pwm_buffer[led.driver][led.b] == blue) {
return;
}
g_pwm_buffer[led.driver][led.r] = red;
g_pwm_buffer[led.driver][led.g] = green;
g_pwm_buffer[led.driver][led.b] = blue;
@ -177,7 +205,8 @@ void is31fl3733_set_color_all(uint8_t red, uint8_t green, uint8_t blue) {
}
void is31fl3733_set_led_control_register(uint8_t index, bool red, bool green, bool blue) {
is31_led led = g_is31_leds[index];
is31_led led;
memcpy_P(&led, (&g_is31_leds[index]), sizeof(led));
uint8_t control_register_r = led.r / 8;
uint8_t control_register_g = led.g / 8;
@ -208,8 +237,8 @@ void is31fl3733_set_led_control_register(uint8_t index, bool red, bool green, bo
void is31fl3733_update_pwm_buffers(uint8_t addr, uint8_t index) {
if (g_pwm_buffer_update_required[index]) {
// Firstly we need to unlock the command register and select PG1.
is31fl3733_write_register(index, addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
is31fl3733_write_register(index, addr, ISSI_COMMANDREGISTER, ISSI_PAGE_PWM);
is31fl3733_write_register(index, addr, IS31FL3733_COMMANDREGISTER_WRITELOCK, 0xC5);
is31fl3733_write_register(index, addr, IS31FL3733_COMMANDREGISTER, IS31FL3733_PAGE_PWM);
// If any of the transactions fail we risk writing dirty PG0,
// refresh page 0 just in case.
@ -223,14 +252,11 @@ void is31fl3733_update_pwm_buffers(uint8_t addr, uint8_t index) {
void is31fl3733_update_led_control_registers(uint8_t addr, uint8_t index) {
if (g_led_control_registers_update_required[index]) {
// Firstly we need to unlock the command register and select PG0
is31fl3733_write_register(index, addr, ISSI_COMMANDREGISTER_WRITELOCK, 0xC5);
is31fl3733_write_register(index, addr, ISSI_COMMANDREGISTER, ISSI_PAGE_LEDCONTROL);
is31fl3733_write_register(index, addr, IS31FL3733_COMMANDREGISTER_WRITELOCK, 0xC5);
is31fl3733_write_register(index, addr, IS31FL3733_COMMANDREGISTER, IS31FL3733_PAGE_LEDCONTROL);
for (int i = 0; i < 24; i++) {
is31fl3733_write_register(index, addr, i, g_led_control_registers[index][i]);
}
}
g_led_control_registers_update_required[index] = false;
}
#endif

View file

@ -47,6 +47,14 @@ void is31fl3733_set_led_control_register(uint8_t index, bool red, bool green, bo
void is31fl3733_update_pwm_buffers(uint8_t addr, uint8_t index); // index is the driver index
void is31fl3733_update_led_control_registers(uint8_t addr, uint8_t index);
#define IS31FL3733_PUR_0R 0x00 // No PUR resistor
#define IS31FL3733_PUR_05KR 0x02 // 0.5k Ohm resistor in t_NOL
#define IS31FL3733_PUR_3KR 0x03 // 3.0k Ohm resistor on all the time
#define IS31FL3733_PUR_4KR 0x04 // 4.0k Ohm resistor on all the time
#define IS31FL3733_PUR_8KR 0x05 // 8.0k Ohm resistor on all the time
#define IS31FL3733_PUR_16KR 0x06 // 16k Ohm resistor on all the time
#define IS31FL3733_PUR_32KR 0x07 // 32k Ohm resistor in t_NOL
#define A_1 0x00
#define A_2 0x01
#define A_3 0x02

View file

@ -15,11 +15,10 @@
*/
#ifdef RGB_MATRIX_ENABLE
#include "rgb_matrix.h"
#include "i2c_master.h"
#include "is31fl3733-dual.h"
#include "gpio.h"
# include "rgb_matrix.h"
# include "i2c_master.h"
# include "is31fl3733-dual.h"
# include "gpio.h"
static void init(void) {
i2c_init(&I2CD1, I2C1_SCL_PIN, I2C1_SDA_PIN);
@ -52,5 +51,4 @@ const rgb_matrix_driver_t rgb_matrix_driver = {
.set_color = is31fl3733_set_color,
.set_color_all = is31fl3733_set_color_all,
};
#endif

View file

@ -18,9 +18,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#include "quantum.h"
#ifdef RGB_MATRIX_ENABLE
#include "is31fl3733-dual.h"
# include "is31fl3733-dual.h"
const is31_led PROGMEM g_is31_leds[RGB_MATRIX_LED_COUNT] = {
{ 0, B_1, A_1, C_1 },
@ -202,15 +200,12 @@ led_config_t g_led_config = {
2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
}
};
#endif
void keyboard_pre_init_kb(void) {
#ifdef RGB_MATRIX_ENABLE
// Turn on LED controller
setPinOutput(B16);
writePinHigh(B16);
#endif
keyboard_pre_init_user();
}
@ -218,7 +213,6 @@ void matrix_init_kb(void) {
// put your keyboard start-up code here
// runs once when the firmware starts up
#ifdef RGB_MATRIX_ENABLE
/*
* Since K20x is stuck with a 32 byte EEPROM (see tmk_core/common/chibios/eeprom_teensy.c),
* and neither led_matrix_eeconfig.speed or .flags fit in this boundary, just force their values to default on boot.
@ -228,7 +222,7 @@ void matrix_init_kb(void) {
# endif
rgb_matrix_set_speed(RGB_MATRIX_DEFAULT_SPD),
rgb_matrix_set_flags(LED_FLAG_ALL);
#endif
matrix_init_user();
}
#endif

View file

@ -54,6 +54,6 @@
// #define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
#define DRIVER_ADDR_1 0b1010000
#define DRIVER_COUNT 1
#define IS31FL3733_DRIVER_COUNT 1
#define RGB_MATRIX_LED_COUNT 52
#endif

View file

@ -50,7 +50,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGB_BACKLIGHT_COLOR_1 { .h = 0, .s = 255 }
#define RGB_BACKLIGHT_COLOR_2 { .h = 127, .s = 255 }
#define DRIVER_COUNT 2
#define IS31FL3733_DRIVER_COUNT 2
#define RGB_MATRIX_LED_COUNT 128
// These define which keys in the matrix are alphas/mods

View file

@ -17,7 +17,7 @@
#pragma once
/* RGB Matrix Driver Configuration */
#define DRIVER_COUNT 2
#define IS31FL3733_DRIVER_COUNT 2
#define DRIVER_ADDR_1 0b1010000
#define DRIVER_ADDR_2 0b1011111

View file

@ -16,14 +16,6 @@
#pragma once
/* DIP switch */
#define DIP_SWITCH_MATRIX_GRID { {0,1} }
/* RGB Matrix Driver Configuration */
#define DRIVER_COUNT 2
#define DRIVER_ADDR_1 0b1010000
#define DRIVER_ADDR_2 0b1011111
/* RGB Matrix Configuration */
#define DRIVER_1_LED_TOTAL 59
#define DRIVER_2_LED_TOTAL 24

View file

@ -64,7 +64,7 @@
#define ENABLE_RGB_MATRIX_SOLID_SPLASH
#define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
#define DRIVER_COUNT 2
#define IS31FL3733_DRIVER_COUNT 2
#define DRIVER_1_LED_TOTAL 63
//#define RGB_MATRIX_LED_COUNT DRIVER_1_LED_TOTAL

View file

@ -19,7 +19,7 @@
# define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended
# define DRIVER_ADDR_1 0b1010000
# define DRIVER_COUNT 2
# define IS31FL3733_DRIVER_COUNT 2
# define DRIVER_1_LED_TOTAL 63
# define RGB_MATRIX_LED_COUNT DRIVER_1_LED_TOTAL

View file

@ -27,7 +27,7 @@
# define DISABLE_RGB_MATRIX_RAINDROPS
# define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS
# define DRIVER_ADDR_1 0b1010000
# define DRIVER_COUNT 1
# define IS31FL3733_DRIVER_COUNT 1
# define DRIVER_1_LED_TOTAL 64

View file

@ -77,7 +77,7 @@
// are compiled unconditionally).
// Configure the IS31FL3733 driver for per-key RGB LEDs
#define DRIVER_COUNT 1
#define IS31FL3733_DRIVER_COUNT 1
#define DRIVER_ADDR_1 0b1010000
#define DRIVER_1_LED_TOTAL 61

View file

@ -68,6 +68,6 @@
// # define ENABLE_RGB_MATRIX_SOLID_SPLASH
// # define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
# define DRIVER_ADDR_1 0b1010000
# define DRIVER_COUNT 1
# define IS31FL3733_DRIVER_COUNT 1
# define RGB_MATRIX_LED_COUNT 60
#endif

View file

@ -54,6 +54,6 @@
// # define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
# define DRIVER_ADDR_1 0b1010000
# define DRIVER_COUNT 1
# define IS31FL3733_DRIVER_COUNT 1
# define RGB_MATRIX_LED_COUNT 62
#endif

View file

@ -37,7 +37,7 @@
#define WEAR_LEVELING_BACKING_SIZE (8 * 1024)
/* I2C Config for LED Driver */
#define DRIVER_COUNT 2
#define IS31FL3733_DRIVER_COUNT 2
#define DRIVER_ADDR_1 0b1110100
#define DRIVER_ADDR_2 0b1110111
#define I2C1_OPMODE OPMODE_I2C

View file

@ -38,7 +38,7 @@
#define WEAR_LEVELING_BACKING_SIZE (8 * 1024)
/* I2C Config for LED Driver */
#define DRIVER_COUNT 2
#define IS31FL3733_DRIVER_COUNT 2
#define DRIVER_ADDR_1 0b1110100
#define DRIVER_ADDR_2 0b1110111
#define I2C1_OPMODE OPMODE_I2C

View file

@ -35,7 +35,7 @@
#define WEAR_LEVELING_BACKING_SIZE (8 * 1024)
/* I2C Config for LED Driver */
#define DRIVER_COUNT 2
#define IS31FL3733_DRIVER_COUNT 2
#define DRIVER_ADDR_1 0b1110100
#define DRIVER_ADDR_2 0b1110111
#define I2C1_SCL_PAL_MODE 4

View file

@ -24,7 +24,7 @@
#define RGB_MATRIX_LED_FLUSH_LIMIT 26
#define DRIVER_ADDR_1 0b1010000
#define DRIVER_COUNT 1
#define IS31FL3733_DRIVER_COUNT 1
#define RGB_MATRIX_LED_COUNT 64

View file

@ -50,7 +50,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGB_BACKLIGHT_COLOR_1 { .h = 0, .s = 255 }
#define RGB_BACKLIGHT_COLOR_2 { .h = 127, .s = 255 }
#define DRIVER_COUNT 2
#define IS31FL3733_DRIVER_COUNT 2
#define RGB_MATRIX_LED_COUNT 128
// These define which keys in the matrix are alphas/mods

View file

@ -50,7 +50,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGB_BACKLIGHT_COLOR_1 { .h = 0, .s = 255 }
#define RGB_BACKLIGHT_COLOR_2 { .h = 127, .s = 255 }
#define DRIVER_COUNT 2
#define IS31FL3733_DRIVER_COUNT 2
#define RGB_MATRIX_LED_COUNT 128
// These define which keys in the matrix are alphas/mods

View file

@ -24,7 +24,7 @@
#define RGB_MATRIX_LED_PROCESS_LIMIT 20
#define RGB_MATRIX_LED_FLUSH_LIMIT 26
#define DRIVER_ADDR_1 0b1010000
#define DRIVER_COUNT 1
#define IS31FL3733_DRIVER_COUNT 1
#define RGB_MATRIX_LED_COUNT 64

View file

@ -20,7 +20,7 @@
#define DRIVER_ADDR_1 0b1010000
#define DRIVER_ADDR_2 0b1010011
#define DRIVER_COUNT 2
#define IS31FL3733_DRIVER_COUNT 2
#define DRIVER_1_LED_TOTAL 45
#define DRIVER_2_LED_TOTAL 45

View file

@ -56,7 +56,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGB_BACKLIGHT_COLOR_1 { .h = 0, .s = 255 }
#define RGB_BACKLIGHT_COLOR_2 { .h = 127, .s = 255 }
#define DRIVER_COUNT 2
#define IS31FL3733_DRIVER_COUNT 2
#define RGB_MATRIX_LED_COUNT 128
// These define which keys in the matrix are alphas/mods

View file

@ -29,7 +29,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* RGB Matrix driver config */
#define DRIVER_COUNT 2
#define IS31FL3733_DRIVER_COUNT 2
#define DRIVER_ADDR_1 0b1010000
#define DRIVER_ADDR_2 0b1010011
#define DRIVER_1_LED_TOTAL 46