diff --git a/keyboards/ergodox_ez/config.h b/keyboards/ergodox_ez/config.h
index 8ef600b0892..eb0f2066da5 100644
--- a/keyboards/ergodox_ez/config.h
+++ b/keyboards/ergodox_ez/config.h
@@ -32,6 +32,16 @@ along with this program. If not, see .
#define MATRIX_ROWS_PER_SIDE (MATRIX_ROWS / 2)
#define MATRIX_COLS 6
+#define COL_EXPANDED { true, true, true, true, true, true, true, false, false, false, false, false, false, false }
+#define MATRIX_ONBOARD_ROW_PINS { 0, 0, 0, 0, 0, 0, 0, B0, B1, B2, B3, D2, D3, C6 }
+#define MATRIX_ONBOARD_COL_PINS { F0, F1, F4, F5, F6, F7 }
+#define DIODE_DIRECTION COL2ROW
+#define EXPANDER_COL_REGISTER GPIOB
+#define EXPANDER_ROW_REGISTER GPIOA
+#define MATRIX_EXPANDER_COL_PINS { 5, 4, 3, 2, 1, 0 }
+#define MATRIX_EXPANDER_ROW_PINS { 0, 1, 2, 3, 4, 5, 6 }
+
+
#define MOUSEKEY_INTERVAL 20
#define MOUSEKEY_DELAY 0
#define MOUSEKEY_TIME_TO_MAX 60
diff --git a/keyboards/ergodox_ez/ergodox_ez.c b/keyboards/ergodox_ez/ergodox_ez.c
index d313f7d5d99..6c0b74ec462 100644
--- a/keyboards/ergodox_ez/ergodox_ez.c
+++ b/keyboards/ergodox_ez/ergodox_ez.c
@@ -1,4 +1,4 @@
-#include QMK_KEYBOARD_H
+#include "ergodox_ez.h"
extern inline void ergodox_board_led_on(void);
extern inline void ergodox_right_led_1_on(void);
diff --git a/keyboards/ergodox_ez/ergodox_ez.h b/keyboards/ergodox_ez/ergodox_ez.h
index 88a0a2ee9fc..a8b02a96bdf 100644
--- a/keyboards/ergodox_ez/ergodox_ez.h
+++ b/keyboards/ergodox_ez/ergodox_ez.h
@@ -4,10 +4,6 @@
#include
#include
#include "i2c_master.h"
-#include
-
-#define CPU_PRESCALE(n) (CLKPR = 0x80, CLKPR = (n))
-#define CPU_16MHz 0x00
// I2C aliases and register addresses (see "mcp23018.md")
#define I2C_ADDR 0b0100000
diff --git a/keyboards/ergodox_ez/matrix.c b/keyboards/ergodox_ez/matrix.c
index 28dc37a0992..cfa76c1c39e 100644
--- a/keyboards/ergodox_ez/matrix.c
+++ b/keyboards/ergodox_ez/matrix.c
@@ -30,7 +30,8 @@ along with this program. If not, see .
#include "util.h"
#include "matrix.h"
#include "debounce.h"
-#include QMK_KEYBOARD_H
+#include "ergodox_ez.h"
+
/*
* This constant define not debouncing time in msecs, assuming eager_pr.
@@ -45,8 +46,8 @@ along with this program. If not, see .
*/
/* matrix state(1:on, 0:off) */
-static matrix_row_t raw_matrix[MATRIX_ROWS]; // raw values
-static matrix_row_t matrix[MATRIX_ROWS]; // debounced values
+extern matrix_row_t matrix[MATRIX_ROWS]; // debounced values
+extern matrix_row_t raw_matrix[MATRIX_ROWS]; // raw values
static matrix_row_t read_cols(uint8_t row);
static void init_cols(void);
@@ -54,132 +55,62 @@ static void unselect_rows(void);
static void select_row(uint8_t row);
static uint8_t mcp23018_reset_loop;
-// static uint16_t mcp23018_reset_loop;
-__attribute__((weak)) void matrix_init_user(void) {}
+void matrix_init_custom(void) {
+ // initialize row and col
-__attribute__((weak)) void matrix_scan_user(void) {}
+ mcp23018_status = init_mcp23018();
-__attribute__((weak)) void matrix_init_kb(void) { matrix_init_user(); }
-
-__attribute__((weak)) void matrix_scan_kb(void) { matrix_scan_user(); }
-
-inline uint8_t matrix_rows(void) { return MATRIX_ROWS; }
-
-inline uint8_t matrix_cols(void) { return MATRIX_COLS; }
-
-void matrix_init(void) {
- // initialize row and col
-
- mcp23018_status = init_mcp23018();
-
- unselect_rows();
- init_cols();
-
- // initialize matrix state: all keys off
- for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
- matrix[i] = 0;
- raw_matrix[i] = 0;
- }
-
- debounce_init(MATRIX_ROWS);
- matrix_init_quantum();
-}
-
-void matrix_power_up(void) {
- mcp23018_status = init_mcp23018();
-
- unselect_rows();
- init_cols();
-
- // initialize matrix state: all keys off
- for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
- matrix[i] = 0;
- }
+ unselect_rows();
+ init_cols();
}
// Reads and stores a row, returning
// whether a change occurred.
static inline bool store_raw_matrix_row(uint8_t index) {
- matrix_row_t temp = read_cols(index);
- if (raw_matrix[index] != temp) {
- raw_matrix[index] = temp;
- return true;
- }
- return false;
+ matrix_row_t temp = read_cols(index);
+ if (raw_matrix[index] != temp) {
+ raw_matrix[index] = temp;
+ return true;
+ }
+ return false;
}
-uint8_t matrix_scan(void) {
- if (mcp23018_status) { // if there was an error
- if (++mcp23018_reset_loop == 0) {
- // if (++mcp23018_reset_loop >= 1300) {
- // since mcp23018_reset_loop is 8 bit - we'll try to reset once in 255 matrix scans
- // this will be approx bit more frequent than once per second
- print("trying to reset mcp23018\n");
- mcp23018_status = init_mcp23018();
- if (mcp23018_status) {
- print("left side not responding\n");
- } else {
- print("left side attached\n");
- ergodox_blink_all_leds();
+bool matrix_scan_custom(matrix_row_t current_matrix[]) {
+ if (mcp23018_status) { // if there was an error
+ if (++mcp23018_reset_loop == 0) {
+ print("trying to reset mcp23018\n");
+ mcp23018_status = init_mcp23018();
+ if (mcp23018_status) {
+ print("left side not responding\n");
+ } else {
+ print("left side attached\n");
+ ergodox_blink_all_leds();
#ifdef RGB_MATRIX_ENABLE
- rgb_matrix_init(); // re-init driver on reconnect
+ rgb_matrix_init(); // re-init driver on reconnect
#endif
- }
+ }
+ }
}
- }
#ifdef LEFT_LEDS
- mcp23018_status = ergodox_left_leds_update();
+ mcp23018_status = ergodox_left_leds_update();
#endif // LEFT_LEDS
- bool changed = false;
- for (uint8_t i = 0; i < MATRIX_ROWS_PER_SIDE; i++) {
- // select rows from left and right hands
- uint8_t left_index = i;
- uint8_t right_index = i + MATRIX_ROWS_PER_SIDE;
- select_row(left_index);
- select_row(right_index);
+ bool changed = false;
+ for (uint8_t i = 0; i < MATRIX_ROWS_PER_SIDE; i++) {
+ // select rows from left and right hands
+ uint8_t left_index = i;
+ uint8_t right_index = i + MATRIX_ROWS_PER_SIDE;
+ select_row(left_index);
+ select_row(right_index);
- // we don't need a 30us delay anymore, because selecting a
- // left-hand row requires more than 30us for i2c.
+ changed |= store_raw_matrix_row(left_index);
+ changed |= store_raw_matrix_row(right_index);
- changed |= store_raw_matrix_row(left_index);
- changed |= store_raw_matrix_row(right_index);
+ unselect_rows();
+ }
- unselect_rows();
- }
-
- debounce(raw_matrix, matrix, MATRIX_ROWS, changed);
- matrix_scan_quantum();
-
- return 1;
-}
-
-bool matrix_is_modified(void) // deprecated and evidently not called.
-{
- return true;
-}
-
-inline bool matrix_is_on(uint8_t row, uint8_t col) { return (matrix[row] & ((matrix_row_t)1 << col)); }
-
-inline matrix_row_t matrix_get_row(uint8_t row) { return matrix[row]; }
-
-void matrix_print(void) {
- print("\nr/c 0123456789ABCDEF\n");
- for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
- phex(row);
- print(": ");
- pbin_reverse16(matrix_get_row(row));
- print("\n");
- }
-}
-
-uint8_t matrix_key_count(void) {
- uint8_t count = 0;
- for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
- count += bitpop16(matrix[i]);
- }
- return count;
+ return changed;
}
/* Column pin configuration
@@ -193,42 +124,43 @@ uint8_t matrix_key_count(void) {
* pin: B5 B4 B3 B2 B1 B0
*/
static void init_cols(void) {
- // init on mcp23018
- // not needed, already done as part of init_mcp23018()
+ // init on mcp23018
+ // not needed, already done as part of init_mcp23018()
- // init on teensy
- // Input with pull-up(DDR:0, PORT:1)
- DDRF &= ~(1 << 7 | 1 << 6 | 1 << 5 | 1 << 4 | 1 << 1 | 1 << 0);
- PORTF |= (1 << 7 | 1 << 6 | 1 << 5 | 1 << 4 | 1 << 1 | 1 << 0);
+ // init on teensy
+ setPinInputHigh(F0);
+ setPinInputHigh(F1);
+ setPinInputHigh(F4);
+ setPinInputHigh(F5);
+ setPinInputHigh(F6);
+ setPinInputHigh(F7);
}
static matrix_row_t read_cols(uint8_t row) {
- if (row < 7) {
- if (mcp23018_status) { // if there was an error
- return 0;
+ if (row < 7) {
+ if (mcp23018_status) { // if there was an error
+ return 0;
+ } else {
+ uint8_t data = 0;
+ // reading GPIOB (column port) since in mcp23018's sequential mode
+ // it is addressed directly after writing to GPIOA in select_row()
+ mcp23018_status = i2c_start(I2C_ADDR_READ, ERGODOX_EZ_I2C_TIMEOUT); if (mcp23018_status) goto out;
+ mcp23018_status = i2c_read_nack(ERGODOX_EZ_I2C_TIMEOUT); if (mcp23018_status < 0) goto out;
+ data = ~((uint8_t)mcp23018_status);
+ mcp23018_status = I2C_STATUS_SUCCESS;
+ out:
+ i2c_stop();
+ return data;
+ }
} else {
- uint8_t data = 0;
- // reading GPIOB (column port) since in mcp23018's sequential mode
- // it is addressed directly after writing to GPIOA in select_row()
- mcp23018_status = i2c_start(I2C_ADDR_READ, ERGODOX_EZ_I2C_TIMEOUT);
- if (mcp23018_status) goto out;
- mcp23018_status = i2c_read_nack(ERGODOX_EZ_I2C_TIMEOUT);
- if (mcp23018_status < 0) goto out;
- data = ~((uint8_t)mcp23018_status);
- mcp23018_status = I2C_STATUS_SUCCESS;
- out:
- i2c_stop();
- return data;
- }
- } else {
- /* read from teensy
- * bitmask is 0b11110011, but we want those all
- * in the lower six bits.
- * we'll return 1s for the top two, but that's harmless.
- */
+ /* read from teensy
+ * bitmask is 0b11110011, but we want those all
+ * in the lower six bits.
+ * we'll return 1s for the top two, but that's harmless.
+ */
- return ~((PINF & 0x03) | ((PINF & 0xF0) >> 2));
- }
+ return ~((PINF & 0x03) | ((PINF & 0xF0) >> 2));
+ }
}
/* Row pin configuration
@@ -242,69 +174,64 @@ static matrix_row_t read_cols(uint8_t row) {
* pin: A0 A1 A2 A3 A4 A5 A6
*/
static void unselect_rows(void) {
- // no need to unselect on mcp23018, because the select step sets all
- // the other row bits high, and it's not changing to a different
- // direction
+ // no need to unselect on mcp23018, because the select step sets all
+ // the other row bits high, and it's not changing to a different
+ // direction
- // unselect on teensy
- // Hi-Z(DDR:0, PORT:0) to unselect
- DDRB &= ~(1 << 0 | 1 << 1 | 1 << 2 | 1 << 3);
- PORTB &= ~(1 << 0 | 1 << 1 | 1 << 2 | 1 << 3);
- DDRD &= ~(1 << 2 | 1 << 3);
- PORTD &= ~(1 << 2 | 1 << 3);
- DDRC &= ~(1 << 6);
- PORTC &= ~(1 << 6);
+ // unselect on teensy
+ setPinInput(B0);
+ setPinInput(B1);
+ setPinInput(B2);
+ setPinInput(B3);
+ setPinInput(D2);
+ setPinInput(D3);
+ setPinInput(C6);
}
static void select_row(uint8_t row) {
- if (row < 7) {
- // select on mcp23018
- if (mcp23018_status) { // if there was an error
- // do nothing
+ if (row < 7) {
+ // select on mcp23018
+ if (!mcp23018_status) {
+ // set active row low : 0
+ // set other rows hi-Z : 1
+ mcp23018_status = i2c_start(I2C_ADDR_WRITE, ERGODOX_EZ_I2C_TIMEOUT); if (mcp23018_status) goto out;
+ mcp23018_status = i2c_write(GPIOA, ERGODOX_EZ_I2C_TIMEOUT); if (mcp23018_status) goto out;
+ mcp23018_status = i2c_write(0xFF & ~(1 << row), ERGODOX_EZ_I2C_TIMEOUT); if (mcp23018_status) goto out;
+ out:
+ i2c_stop();
+ }
} else {
- // set active row low : 0
- // set other rows hi-Z : 1
- mcp23018_status = i2c_start(I2C_ADDR_WRITE, ERGODOX_EZ_I2C_TIMEOUT);
- if (mcp23018_status) goto out;
- mcp23018_status = i2c_write(GPIOA, ERGODOX_EZ_I2C_TIMEOUT);
- if (mcp23018_status) goto out;
- mcp23018_status = i2c_write(0xFF & ~(1 << row), ERGODOX_EZ_I2C_TIMEOUT);
- if (mcp23018_status) goto out;
- out:
- i2c_stop();
+ // select on teensy
+ // Output low(DDR:1, PORT:0) to select
+ switch (row) {
+ case 7:
+ setPinOutput(B0);
+ writePinLow(B0);
+ break;
+ case 8:
+ setPinOutput(B1);
+ writePinLow(B1);
+ break;
+ case 9:
+ setPinOutput(B2);
+ writePinLow(B2);
+ break;
+ case 10:
+ setPinOutput(B3);
+ writePinLow(B3);
+ break;
+ case 11:
+ setPinOutput(D2);
+ writePinLow(D2);
+ break;
+ case 12:
+ setPinOutput(D3);
+ writePinLow(D3);
+ break;
+ case 13:
+ setPinOutput(C6);
+ writePinLow(C6);
+ break;
+ }
}
- } else {
- // select on teensy
- // Output low(DDR:1, PORT:0) to select
- switch (row) {
- case 7:
- DDRB |= (1 << 0);
- PORTB &= ~(1 << 0);
- break;
- case 8:
- DDRB |= (1 << 1);
- PORTB &= ~(1 << 1);
- break;
- case 9:
- DDRB |= (1 << 2);
- PORTB &= ~(1 << 2);
- break;
- case 10:
- DDRB |= (1 << 3);
- PORTB &= ~(1 << 3);
- break;
- case 11:
- DDRD |= (1 << 2);
- PORTD &= ~(1 << 2);
- break;
- case 12:
- DDRD |= (1 << 3);
- PORTD &= ~(1 << 3);
- break;
- case 13:
- DDRC |= (1 << 6);
- PORTC &= ~(1 << 6);
- break;
- }
- }
}
diff --git a/keyboards/ergodox_ez/rules.mk b/keyboards/ergodox_ez/rules.mk
index 579e4f59de5..9ad4eaa186e 100644
--- a/keyboards/ergodox_ez/rules.mk
+++ b/keyboards/ergodox_ez/rules.mk
@@ -19,20 +19,20 @@ BOOTLOADER = halfkay
# Build Options
# comment out to disable the options.
#
-BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration
-MOUSEKEY_ENABLE = yes # Mouse keys
-EXTRAKEY_ENABLE = yes # Audio control and System control
-CONSOLE_ENABLE = no # Console for debug
-COMMAND_ENABLE = yes # Commands for debug and configuration
-CUSTOM_MATRIX = yes # Custom matrix file for the ErgoDox EZ
-NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-UNICODE_ENABLE = yes # Unicode
-SWAP_HANDS_ENABLE= yes # Allow swapping hands of keyboard
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = yes # Mouse keys
+EXTRAKEY_ENABLE = yes # Audio control and System control
+CONSOLE_ENABLE = no # Console for debug
+COMMAND_ENABLE = yes # Commands for debug and configuration
+CUSTOM_MATRIX = lite # Custom matrix file for the ErgoDox EZ
+NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+UNICODE_ENABLE = yes # Unicode
+SWAP_HANDS_ENABLE= yes # Allow swapping hands of keyboard
SLEEP_LED_ENABLE = no
API_SYSEX_ENABLE = no
RGBLIGHT_ENABLE = yes
-RGB_MATRIX_ENABLE = no # enable later
+RGB_MATRIX_ENABLE = no # enable later
DEBOUNCE_TYPE = eager_pr
# project specific files