From 0093d3d761e60a31bb2a15a5859dbd0c08ef9999 Mon Sep 17 00:00:00 2001 From: Joel Challis Date: Fri, 22 Oct 2021 00:49:58 +0100 Subject: [PATCH] Initial USB2422 driver (#14835) --- .../usb/usb2422.h => drivers/usb2422.c | 214 +++++++++--------- drivers/usb2422.h | 59 +++++ keyboards/massdrop/alt/alt.h | 2 +- keyboards/massdrop/alt/config.h | 9 + keyboards/massdrop/ctrl/config.h | 9 + keyboards/massdrop/ctrl/ctrl.h | 2 +- tmk_core/protocol/arm_atsam.mk | 4 +- .../protocol/arm_atsam/arm_atsam_protocol.h | 2 +- tmk_core/protocol/arm_atsam/i2c_master.c | 19 ++ tmk_core/protocol/arm_atsam/i2c_master.h | 9 + tmk_core/protocol/arm_atsam/main_arm_atsam.c | 4 +- .../arm_atsam/usb/{usb2422.c => usb_hub.c} | 98 +------- tmk_core/protocol/arm_atsam/usb/usb_hub.h | 51 +++++ 13 files changed, 277 insertions(+), 205 deletions(-) rename tmk_core/protocol/arm_atsam/usb/usb2422.h => drivers/usb2422.c (68%) create mode 100644 drivers/usb2422.h rename tmk_core/protocol/arm_atsam/usb/{usb2422.c => usb_hub.c} (67%) create mode 100644 tmk_core/protocol/arm_atsam/usb/usb_hub.h diff --git a/tmk_core/protocol/arm_atsam/usb/usb2422.h b/drivers/usb2422.c similarity index 68% rename from tmk_core/protocol/arm_atsam/usb/usb2422.h rename to drivers/usb2422.c index b4830b5bc8f..62b919093b9 100644 --- a/tmk_core/protocol/arm_atsam/usb/usb2422.h +++ b/drivers/usb2422.c @@ -1,32 +1,25 @@ -/* -Copyright 2018 Massdrop Inc. - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef _USB2422_H_ -#define _USB2422_H_ - -#define REV_USB2422 0x100 - -#define USB2422_ADDR 0x58 // I2C device address, one instance - -#define USB2422_HUB_ACTIVE_GROUP 0 // PA -#define USB2422_HUB_ACTIVE_PIN 18 // 18 +/* Copyright 2021 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include +#include "usb2422.h" +#include "i2c_master.h" +#include "wait.h" +#include "gpio.h" /* -------- USB2422_VID : (USB2422L Offset: 0x00) (R/W 16) Vendor ID -------- */ -#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) typedef union { struct { uint16_t VID_LSB : 8; @@ -34,10 +27,8 @@ typedef union { } bit; /*!< Structure used for bit access */ uint16_t reg; /*!< Type used for register access */ } USB2422_VID_Type; -#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ /* -------- USB2422_PID : (USB2422L Offset: 0x02) (R/W 16) Product ID -------- */ -#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) typedef union { struct { uint16_t PID_LSB : 8; @@ -45,10 +36,8 @@ typedef union { } bit; /*!< Structure used for bit access */ uint16_t reg; /*!< Type used for register access */ } USB2422_PID_Type; -#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ /* -------- USB2422_DID : (USB2422L Offset: 0x04) (R/W 16) Device ID -------- */ -#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) typedef union { struct { uint16_t DID_LSB : 8; @@ -56,10 +45,8 @@ typedef union { } bit; /*!< Structure used for bit access */ uint16_t reg; /*!< Type used for register access */ } USB2422_DID_Type; -#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ /* -------- USB2422_CFG1 : (USB2422L Offset: 0x06) (R/W 8) Configuration Data Byte 1-------- */ -#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) typedef union { struct { uint8_t PORT_PWR : 1; @@ -72,10 +59,8 @@ typedef union { } bit; /*!< Structure used for bit access */ uint8_t reg; /*!< Type used for register access */ } USB2422_CFG1_Type; -#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ /* -------- USB2422_CFG2 : (USB2422L Offset: 0x07) (R/W 8) Configuration Data Byte 2-------- */ -#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) typedef union { struct { uint8_t : 3; @@ -86,10 +71,8 @@ typedef union { } bit; /*!< Structure used for bit access */ uint8_t reg; /*!< Type used for register access */ } USB2422_CFG2_Type; -#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ /* -------- USB2422_CFG3 : (USB2422L Offset: 0x08) (R/W 16) Configuration Data Byte 3-------- */ -#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) typedef union { struct { uint8_t STRING_EN : 1; @@ -99,10 +82,8 @@ typedef union { } bit; /*!< Structure used for bit access */ uint8_t reg; /*!< Type used for register access */ } USB2422_CFG3_Type; -#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ /* -------- USB2422_NRD : (USB2422L Offset: 0x09) (R/W 8) Non Removable Device -------- */ -#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) typedef union { struct { uint8_t : 5; @@ -112,10 +93,8 @@ typedef union { } bit; /*!< Structure used for bit access */ uint8_t reg; /*!< Type used for register access */ } USB2422_NRD_Type; -#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ /* -------- USB2422_PDS : (USB2422L Offset: 0x0A) (R/W 8) Port Diable for Self-Powered Operation -------- */ -#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) typedef union { struct { uint8_t : 1; @@ -125,10 +104,9 @@ typedef union { } bit; /*!< Structure used for bit access */ uint8_t reg; /*!< Type used for register access */ } USB2422_PDS_Type; -#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ /* -------- USB2422_PDB : (USB2422L Offset: 0x0B) (R/W 8) Port Diable for Bus-Powered Operation -------- */ -#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) + typedef union { struct { uint8_t : 1; @@ -138,125 +116,98 @@ typedef union { } bit; /*!< Structure used for bit access */ uint8_t reg; /*!< Type used for register access */ } USB2422_PDB_Type; -#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ /* -------- USB2422_MAXPS : (USB2422L Offset: 0x0C) (R/W 8) Max Power for Self-Powered Operation -------- */ -#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) typedef union { struct { uint8_t MAX_PWR_SP : 8; } bit; /*!< Structure used for bit access */ uint8_t reg; /*!< Type used for register access */ } USB2422_MAXPS_Type; -#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ /* -------- USB2422_MAXPB : (USB2422L Offset: 0x0D) (R/W 8) Max Power for Bus-Powered Operation -------- */ -#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) typedef union { struct { uint8_t MAX_PWR_BP : 8; } bit; /*!< Structure used for bit access */ uint8_t reg; /*!< Type used for register access */ } USB2422_MAXPB_Type; -#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ /* -------- USB2422_HCMCS : (USB2422L Offset: 0x0E) (R/W 8) Hub Controller Max Current for Self-Powered Operation -------- */ -#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) typedef union { struct { uint8_t HC_MAX_C_SP : 8; } bit; /*!< Structure used for bit access */ uint8_t reg; /*!< Type used for register access */ } USB2422_HCMCS_Type; -#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ /* -------- USB2422_HCMCB : (USB2422L Offset: 0x0F) (R/W 8) Hub Controller Max Current for Bus-Powered Operation -------- */ -#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) typedef union { struct { uint8_t HC_MAX_C_BP : 8; } bit; /*!< Structure used for bit access */ uint8_t reg; /*!< Type used for register access */ } USB2422_HCMCB_Type; -#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ /* -------- USB2422_PWRT : (USB2422L Offset: 0x10) (R/W 8) Power On Time -------- */ -#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) typedef union { struct { uint8_t POWER_ON_TIME : 8; } bit; /*!< Structure used for bit access */ uint8_t reg; /*!< Type used for register access */ } USB2422_PWRT_Type; -#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ /* -------- USB2422_LANGID LSB : (USB2422L Offset: 0x11) (R/W 16) Language ID -------- */ -#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) typedef union { struct { uint8_t LANGID_LSB : 8; } bit; /*!< Structure used for bit access */ uint8_t reg; /*!< Type used for register access */ } USB2422_LANGID_LSB_Type; -#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ /* -------- USB2422_LANGID MSB : (USB2422L Offset: 0x12) (R/W 16) Language ID -------- */ -#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) typedef union { struct { uint8_t LANGID_MSB : 8; } bit; /*!< Structure used for bit access */ uint8_t reg; /*!< Type used for register access */ } USB2422_LANGID_MSB_Type; -#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ /* -------- USB2422_MFRSL : (USB2422L Offset: 0x13) (R/W 8) Manufacturer String Length -------- */ -#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) typedef union { struct { uint8_t MFR_STR_LEN : 8; } bit; /*!< Structure used for bit access */ uint8_t reg; /*!< Type used for register access */ } USB2422_MFRSL_Type; -#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ /* -------- USB2422_PRDSL : (USB2422L Offset: 0x14) (R/W 8) Product String Length -------- */ -#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) typedef union { struct { uint8_t PRD_STR_LEN : 8; } bit; /*!< Structure used for bit access */ uint8_t reg; /*!< Type used for register access */ } USB2422_PRDSL_Type; -#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ /* -------- USB2422_SERSL : (USB2422L Offset: 0x15) (R/W 8) Serial String Length -------- */ -#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) typedef union { struct { uint8_t SER_STR_LEN : 8; } bit; /*!< Structure used for bit access */ uint8_t reg; /*!< Type used for register access */ } USB2422_SERSL_Type; -#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ /* -------- USB2422_MFRSTR : (USB2422L Offset: 0x16-53) (R/W 8) Maufacturer String -------- */ -#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) typedef uint16_t USB2422_MFRSTR_Type; -#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ /* -------- USB2422_PRDSTR : (USB2422L Offset: 0x54-91) (R/W 8) Product String -------- */ -#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) typedef uint16_t USB2422_PRDSTR_Type; -#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ /* -------- USB2422_SERSTR : (USB2422L Offset: 0x92-CF) (R/W 8) Serial String -------- */ -#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) typedef uint16_t USB2422_SERSTR_Type; -#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ /* -------- USB2422_BCEN : (USB2422L Offset: 0xD0) (R/W 8) Battery Charging Enable -------- */ -#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) + typedef union { struct { uint8_t : 1; @@ -266,10 +217,8 @@ typedef union { } bit; /*!< Structure used for bit access */ uint8_t reg; /*!< Type used for register access */ } USB2422_BCEN_Type; -#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ /* -------- USB2422_BOOSTUP : (USB2422L Offset: 0xF6) (R/W 8) Boost Upstream -------- */ -#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) typedef union { struct { uint8_t BOOST : 2; @@ -277,10 +226,8 @@ typedef union { } bit; /*!< Structure used for bit access */ uint8_t reg; /*!< Type used for register access */ } USB2422_BOOSTUP_Type; -#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ /* -------- USB2422_BOOSTDOWN : (USB2422L Offset: 0xF8) (R/W 8) Boost Downstream -------- */ -#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) typedef union { struct { uint8_t BOOST1 : 2; @@ -289,10 +236,8 @@ typedef union { } bit; /*!< Structure used for bit access */ uint8_t reg; /*!< Type used for register access */ } USB2422_BOOSTDOWN_Type; -#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ /* -------- USB2422_PRTSP : (USB2422L Offset: 0xFA) (R/W 8) Port Swap -------- */ -#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) typedef union { struct { uint8_t : 1; @@ -302,10 +247,8 @@ typedef union { } bit; /*!< Structure used for bit access */ uint8_t reg; /*!< Type used for register access */ } USB2422_PRTSP_Type; -#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ /* -------- USB2422_PRTR12 : (USB2422L Offset: 0xFB) (R/W 8) Port 1/2 Remap -------- */ -#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) typedef union { struct { uint8_t PORT1_REMAP : 4; @@ -313,7 +256,7 @@ typedef union { } bit; /*!< Structure used for bit access */ uint8_t reg; /*!< Type used for register access */ } USB2422_PRTR12_Type; -#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ + #define USB2422_PRTR12_DISABLE 0 #define USB2422_PRT12_P2TOL1 1 #define USB2422_PRT12_P2XTOL2 2 @@ -321,7 +264,6 @@ typedef union { #define USB2422_PRT12_P1XTOL2 2 /* -------- USB2422_STCD : (USB2422L Offset: 0xFF) (R/W 8) Status Command -------- */ -#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) typedef union { struct { uint8_t USB_ATTACH : 1; @@ -331,10 +273,8 @@ typedef union { } bit; /*!< Structure used for bit access */ uint8_t reg; /*!< Type used for register access */ } USB2422_STCD_Type; -#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ /** \brief USB2422 device hardware registers */ -#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) typedef struct { USB2422_VID_Type VID; /**< \brief Offset: 0x00*/ USB2422_PID_Type PID; /**< \brief Offset: 0x02*/ @@ -368,35 +308,95 @@ typedef struct { USB2422_PRTR12_Type PRTR12; /**< \brief Offset: 0xFB*/ uint8_t Reserved4[0x3]; USB2422_STCD_Type STCD; /**< \brief Offset: 0xFF*/ -} Usb2422; +} Usb2422_t; + +// *************************************************************** + +static Usb2422_t config; + +// *************************************************************** + +/** \brief Handle the conversion to allow simple strings + */ +static void USB2422_strcpy(const char* str, USB2422_MFRSTR_Type* dest, uint8_t len) { + for (uint8_t i = 0; i < len; i++) { + dest[i] = str[i]; + } +} + +/** \brief Handle the conversion to allow simple strings + */ +static void USB2422_write_block(void) { + static unsigned char i2c0_buf[34]; + + unsigned char* dest = i2c0_buf; + unsigned char* src; + unsigned char* base = (unsigned char*)&config; + + for (src = base; src < base + 256; src += 32) { + dest[0] = src - base; + dest[1] = 32; + memcpy(&dest[2], src, 32); + i2c_transmit(USB2422_ADDRESS, dest, 34, 50000); + wait_us(100); + } +} + +// *************************************************************** + +void USB2422_init() { +#ifdef USB2422_RESET_PIN + setPinOutput(USB2422_RESET_PIN); +#endif +#ifdef USB2422_ACTIVE_PIN + setPinInput(USB2422_ACTIVE_PIN); #endif -#define PORT_DETECT_RETRY_INTERVAL 2000 + i2c_init(); // IC2 clk must be high at USB2422 reset release time to signal SMB configuration +} -#define USB_EXTRA_ADC_THRESHOLD 900 +void USB2422_configure() { + static const char SERNAME[] = "Unavailable"; -#define USB_EXTRA_STATE_DISABLED 0 -#define USB_EXTRA_STATE_ENABLED 1 -#define USB_EXTRA_STATE_UNKNOWN 2 -#define USB_EXTRA_STATE_DISABLED_UNTIL_REPLUG 3 + memset(&config, 0, sizeof(Usb2422_t)); -#define USB_HOST_PORT_1 0 -#define USB_HOST_PORT_2 1 -#define USB_HOST_PORT_UNKNOWN 2 + // configure Usb2422 registers + config.VID.reg = USB2422_VENDOR_ID; + config.PID.reg = USB2422_PRODUCT_ID; + config.DID.reg = USB2422_DEVICE_VER; // BCD format, eg 01.01 + config.CFG1.bit.SELF_BUS_PWR = 1; // self powered for now + config.CFG1.bit.HS_DISABLE = 1; // full or high speed + // config.CFG2.bit.COMPOUND = 0; // compound device + config.CFG3.bit.STRING_EN = 1; // strings enabled + // config.NRD.bit.PORT2_NR = 0; // MCU is non-removable + config.MAXPB.reg = 20; // 0mA + config.HCMCB.reg = 20; // 0mA + config.MFRSL.reg = sizeof(USB2422_MANUFACTURER); + config.PRDSL.reg = sizeof(USB2422_PRODUCT); + config.SERSL.reg = sizeof(SERNAME); + USB2422_strcpy(USB2422_MANUFACTURER, config.MFRSTR, sizeof(USB2422_MANUFACTURER)); + USB2422_strcpy(USB2422_PRODUCT, config.PRDSTR, sizeof(USB2422_PRODUCT)); + USB2422_strcpy(SERNAME, config.SERSTR, sizeof(SERNAME)); + // config.BOOSTUP.bit.BOOST=3; //upstream port + // config.BOOSTDOWN.bit.BOOST1=0; // extra port + // config.BOOSTDOWN.bit.BOOST2=2; //MCU is close + config.STCD.bit.USB_ATTACH = 1; -extern uint8_t usb_host_port; -extern uint8_t usb_extra_state; -extern uint8_t usb_extra_manual; -extern uint8_t usb_gcr_auto; + USB2422_write_block(); +} -void USB2422_init(void); -void USB_reset(void); -void USB_configure(void); -uint16_t USB_active(void); -void USB_set_host_by_voltage(void); -uint16_t adc_get(uint8_t muxpos); -uint8_t USB2422_Port_Detect_Init(void); -void USB_HandleExtraDevice(void); -void USB_ExtraSetState(uint8_t state); +void USB2422_reset() { +#ifdef USB2422_RESET_PIN + writePinLow(USB2422_RESET_PIN); + wait_us(2); + writePinHigh(USB2422_RESET_PIN); +#endif +} -#endif //_USB2422_H_ +bool USB2422_active() { +#ifdef USB2422_ACTIVE_PIN + return readPin(USB2422_ACTIVE_PIN); +#else + return 1; +#endif +} diff --git a/drivers/usb2422.h b/drivers/usb2422.h new file mode 100644 index 00000000000..2e435b02bc9 --- /dev/null +++ b/drivers/usb2422.h @@ -0,0 +1,59 @@ +/* Copyright 2021 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#include + +#ifndef USB2422_ADDRESS +# define USB2422_ADDRESS 0x58 +#endif + +#ifndef USB2422_VENDOR_ID +# define USB2422_VENDOR_ID 0xFEED +#endif +#ifndef USB2422_PRODUCT_ID +# define USB2422_PRODUCT_ID 0x0001 +#endif +#ifndef USB2422_DEVICE_VER +# define USB2422_DEVICE_VER 0x0001 +#endif + +#ifndef USB2422_MANUFACTURER +# define USB2422_MANUFACTURER "QMK" +#endif +#ifndef USB2422_PRODUCT +# define USB2422_PRODUCT "QMK Hub" +#endif + +/** \brief Initialises the dependent subsystems */ +void USB2422_init(void); + +/** \brief Push configuration to the USB2422 device */ +void USB2422_configure(void); + +/** \brief Reset the chip (RESET_N) + * + * NOTE: + * Depends on a valid USB2422_RESET_PIN configuration + */ +void USB2422_reset(void); + +/** \brief Indicates the USB state of the hub (SUSP_IND) + * + * NOTE: + * Depends on a valid USB2422_ACTIVE_PIN configuration + */ +bool USB2422_active(void); diff --git a/keyboards/massdrop/alt/alt.h b/keyboards/massdrop/alt/alt.h index 03960954506..c3761bee8ba 100644 --- a/keyboards/massdrop/alt/alt.h +++ b/keyboards/massdrop/alt/alt.h @@ -7,7 +7,7 @@ #include "i2c_master.h" #include "md_rgb_matrix.h" //For led keycodes #include "usb/udi_cdc.h" -#include "usb/usb2422.h" +#include "usb/usb_hub.h" #define LAYOUT_65_ansi_blocker( \ K01, K02, K03, K04, K05, K06, K07, K08, K09, K10, K11, K12, K13, K14, K15, \ diff --git a/keyboards/massdrop/alt/config.h b/keyboards/massdrop/alt/config.h index 085e1aebbae..c37949a74b6 100644 --- a/keyboards/massdrop/alt/config.h +++ b/keyboards/massdrop/alt/config.h @@ -90,6 +90,15 @@ along with this program. If not, see . #define DEBUG_BOOT_TRACING_PORT PB #define DEBUG_BOOT_TRACING_PIN 23 +/* USB2422 config */ +#define USB2422_ADDRESS 0x58 +#define USB2422_VENDOR_ID 0x04D8 +#define USB2422_PRODUCT_ID 0xEEC5 +#define USB2422_DEVICE_VER 0x0101 +#define USB2422_MANUFACTURER "Massdrop Inc." +#define USB2422_PRODUCT "Massdrop Hub" +#define USB2422_ACTIVE_PIN A18 + /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ #define DEBOUNCE 5 diff --git a/keyboards/massdrop/ctrl/config.h b/keyboards/massdrop/ctrl/config.h index aefb9004486..fe8b6002341 100644 --- a/keyboards/massdrop/ctrl/config.h +++ b/keyboards/massdrop/ctrl/config.h @@ -89,6 +89,15 @@ along with this program. If not, see . #define DEBUG_BOOT_TRACING_PORT PB #define DEBUG_BOOT_TRACING_PIN 23 +/* USB2422 config */ +#define USB2422_ADDRESS 0x58 +#define USB2422_VENDOR_ID 0x04D8 +#define USB2422_PRODUCT_ID 0xEEC5 +#define USB2422_DEVICE_VER 0x0101 +#define USB2422_MANUFACTURER "Massdrop Inc." +#define USB2422_PRODUCT "Massdrop Hub" +#define USB2422_ACTIVE_PIN A18 + /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ #define DEBOUNCE 5 diff --git a/keyboards/massdrop/ctrl/ctrl.h b/keyboards/massdrop/ctrl/ctrl.h index 1650beb9a44..a3d66ba7755 100644 --- a/keyboards/massdrop/ctrl/ctrl.h +++ b/keyboards/massdrop/ctrl/ctrl.h @@ -7,7 +7,7 @@ #include "i2c_master.h" #include "md_rgb_matrix.h" //For led keycodes #include "usb/udi_cdc.h" -#include "usb/usb2422.h" +#include "usb/usb_hub.h" #define LAYOUT( \ K01, K02, K03, K04, K05, K06, K07, K08, K09, K10, K11, K12, K13, K14, K15, \ diff --git a/tmk_core/protocol/arm_atsam.mk b/tmk_core/protocol/arm_atsam.mk index e3b55059662..ffd1fa9f502 100644 --- a/tmk_core/protocol/arm_atsam.mk +++ b/tmk_core/protocol/arm_atsam.mk @@ -20,10 +20,12 @@ SRC += $(ARM_ATSAM_DIR)/usb/udi_hid.c SRC += $(ARM_ATSAM_DIR)/usb/udi_hid_kbd.c SRC += $(ARM_ATSAM_DIR)/usb/udi_hid_kbd_desc.c SRC += $(ARM_ATSAM_DIR)/usb/ui.c -SRC += $(ARM_ATSAM_DIR)/usb/usb2422.c SRC += $(ARM_ATSAM_DIR)/usb/usb.c SRC += $(ARM_ATSAM_DIR)/usb/usb_device_udd.c +SRC += $(ARM_ATSAM_DIR)/usb/usb_hub.c SRC += $(ARM_ATSAM_DIR)/usb/usb_util.c +SRC += $(DRIVER_PATH)/usb2422.c + # Search Path VPATH += $(TMK_DIR)/$(ARM_ATSAM_DIR) diff --git a/tmk_core/protocol/arm_atsam/arm_atsam_protocol.h b/tmk_core/protocol/arm_atsam/arm_atsam_protocol.h index c3eab39fb18..e1749f872da 100644 --- a/tmk_core/protocol/arm_atsam/arm_atsam_protocol.h +++ b/tmk_core/protocol/arm_atsam/arm_atsam_protocol.h @@ -29,7 +29,7 @@ along with this program. If not, see . #include "i2c_master.h" #include "shift_register.h" -#include "./usb/usb2422.h" +#include "./usb/usb_hub.h" #ifndef MD_BOOTLOADER diff --git a/tmk_core/protocol/arm_atsam/i2c_master.c b/tmk_core/protocol/arm_atsam/i2c_master.c index dda2f85b001..af046625f43 100644 --- a/tmk_core/protocol/arm_atsam/i2c_master.c +++ b/tmk_core/protocol/arm_atsam/i2c_master.c @@ -564,4 +564,23 @@ uint8_t i2c_led_q_run(void) { return 1; } + +__attribute__((weak)) void i2c_init(void) { + static bool is_initialised = false; + if (!is_initialised) { + is_initialised = true; + + i2c0_init(); + } +} + +i2c_status_t i2c_transmit(uint8_t address, const uint8_t *data, uint16_t length, uint16_t timeout) { + uint8_t ret = i2c0_transmit(address, (uint8_t *)data, length, timeout); + SERCOM0->I2CM.CTRLB.bit.CMD = 0x03; + while (SERCOM0->I2CM.SYNCBUSY.bit.SYSOP) { + DBGC(DC_USB_WRITE2422_BLOCK_SYNC_SYSOP); + } + return ret ? I2C_STATUS_SUCCESS : I2C_STATUS_ERROR; +} + #endif // !defined(MD_BOOTLOADER) && defined(RGB_MATRIX_ENABLE) diff --git a/tmk_core/protocol/arm_atsam/i2c_master.h b/tmk_core/protocol/arm_atsam/i2c_master.h index 68773f213fb..e11235d4476 100644 --- a/tmk_core/protocol/arm_atsam/i2c_master.h +++ b/tmk_core/protocol/arm_atsam/i2c_master.h @@ -101,4 +101,13 @@ void i2c0_init(void); uint8_t i2c0_transmit(uint8_t address, uint8_t *data, uint16_t length, uint16_t timeout); void i2c0_stop(void); +// Terrible interface compatiblity... +#define I2C_STATUS_SUCCESS (0) +#define I2C_STATUS_ERROR (-1) + +typedef int16_t i2c_status_t; + +void i2c_init(void); +i2c_status_t i2c_transmit(uint8_t address, const uint8_t *data, uint16_t length, uint16_t timeout); + #endif // _I2C_MASTER_H_ diff --git a/tmk_core/protocol/arm_atsam/main_arm_atsam.c b/tmk_core/protocol/arm_atsam/main_arm_atsam.c index 858b4cd9fc0..1df5112ed8a 100644 --- a/tmk_core/protocol/arm_atsam/main_arm_atsam.c +++ b/tmk_core/protocol/arm_atsam/main_arm_atsam.c @@ -296,7 +296,7 @@ int main(void) { matrix_init(); - USB2422_init(); + USB_Hub_init(); DBGC(DC_MAIN_UDC_START_BEGIN); udc_start(); @@ -306,7 +306,7 @@ int main(void) { CDC_init(); DBGC(DC_MAIN_CDC_INIT_COMPLETE); - while (USB2422_Port_Detect_Init() == 0) { + while (USB_Hub_Port_Detect_Init() == 0) { } DBG_LED_OFF; diff --git a/tmk_core/protocol/arm_atsam/usb/usb2422.c b/tmk_core/protocol/arm_atsam/usb/usb_hub.c similarity index 67% rename from tmk_core/protocol/arm_atsam/usb/usb2422.c rename to tmk_core/protocol/arm_atsam/usb/usb_hub.c index a878cb6b7ca..c5fd284aab7 100644 --- a/tmk_core/protocol/arm_atsam/usb/usb2422.c +++ b/tmk_core/protocol/arm_atsam/usb/usb_hub.c @@ -16,25 +16,9 @@ along with this program. If not, see . */ #include "arm_atsam_protocol.h" +#include "drivers/usb2422.h" #include -Usb2422 USB2422_shadow; -unsigned char i2c0_buf[34]; - -const uint16_t MFRNAME[] = {'M', 'a', 's', 's', 'd', 'r', 'o', 'p', ' ', 'I', 'n', 'c', '.'}; // Massdrop Inc. -const uint16_t PRDNAME[] = {'M', 'a', 's', 's', 'd', 'r', 'o', 'p', ' ', 'H', 'u', 'b'}; // Massdrop Hub -#ifndef MD_BOOTLOADER -// Serial number reported stops before first found space character or at last found character -const uint16_t SERNAME[] = {'U', 'n', 'a', 'v', 'a', 'i', 'l', 'a', 'b', 'l', 'e'}; // Unavailable -#else -// In production, this field is found, modified, and offset noted as the last 32-bit word in the bootloader space -// The offset allows the application to use the factory programmed serial (which may differ from the physical serial label) -// Serial number reported stops before first found space character or when max size is reached -__attribute__((__aligned__(4))) const uint16_t SERNAME[BOOTLOADER_SERIAL_MAX_SIZE] = {'M', 'D', 'H', 'U', 'B', 'B', 'O', 'O', 'T', 'L', '0', '0', '0', '0', '0', '0', '0', '0', '0', '0'}; -// NOTE: Serial replacer will not write a string longer than given here as a precaution, so give enough -// space as needed and adjust BOOTLOADER_SERIAL_MAX_SIZE to match amount given -#endif // MD_BOOTLOADER - uint8_t usb_host_port; #ifndef MD_BOOTLOADER @@ -47,29 +31,7 @@ uint8_t usb_gcr_auto; uint16_t adc_extra; -void USB_write2422_block(void) { - unsigned char *dest = i2c0_buf; - unsigned char *src; - unsigned char *base = (unsigned char *)&USB2422_shadow; - - DBGC(DC_USB_WRITE2422_BLOCK_BEGIN); - - for (src = base; src < base + 256; src += 32) { - dest[0] = src - base; - dest[1] = 32; - memcpy(&dest[2], src, 32); - i2c0_transmit(USB2422_ADDR, dest, 34, 50000); - SERCOM0->I2CM.CTRLB.bit.CMD = 0x03; - while (SERCOM0->I2CM.SYNCBUSY.bit.SYSOP) { - DBGC(DC_USB_WRITE2422_BLOCK_SYNC_SYSOP); - } - wait_us(100); - } - - DBGC(DC_USB_WRITE2422_BLOCK_COMPLETE); -} - -void USB2422_init(void) { +void USB_Hub_init(void) { Gclk * pgclk = GCLK; Mclk * pmclk = MCLK; Port * pport = PORT; @@ -147,9 +109,7 @@ void USB2422_init(void) { pusb->DEVICE.QOSCTRL.bit.DQOS = 2; pusb->DEVICE.QOSCTRL.bit.CQOS = 2; - pport->Group[USB2422_HUB_ACTIVE_GROUP].PINCFG[USB2422_HUB_ACTIVE_PIN].bit.INEN = 1; - - i2c0_init(); // IC2 clk must be high at USB2422 reset release time to signal SMB configuration + USB2422_init(); sr_exp_data.bit.HUB_CONNECT = 1; // connect signal sr_exp_data.bit.HUB_RESET_N = 1; // reset high @@ -181,62 +141,16 @@ void USB_reset(void) { } void USB_configure(void) { - Usb2422 *pusb2422 = &USB2422_shadow; - memset(pusb2422, 0, sizeof(Usb2422)); - - uint16_t *serial_use = (uint16_t *)SERNAME; // Default to use SERNAME from this file - uint8_t serial_length = sizeof(SERNAME) / sizeof(uint16_t); // Default to use SERNAME from this file -#ifndef MD_BOOTLOADER - uint32_t serial_ptrloc = (uint32_t)&_srom - 4; -#else // MD_BOOTLOADER - uint32_t serial_ptrloc = (uint32_t)&_erom - 4; -#endif // MD_BOOTLOADER - uint32_t serial_address = *(uint32_t *)serial_ptrloc; // Address of bootloader's serial number if available - DBGC(DC_USB_CONFIGURE_BEGIN); - if (serial_address != 0xFFFFFFFF && serial_address < serial_ptrloc) // Check for factory programmed serial address - { - if ((serial_address & 0xFF) % 4 == 0) // Check alignment - { - serial_use = (uint16_t *)(serial_address); - serial_length = 0; - while ((*(serial_use + serial_length) > 32 && *(serial_use + serial_length) < 127) && serial_length < BOOTLOADER_SERIAL_MAX_SIZE) { - serial_length++; - DBGC(DC_USB_CONFIGURE_GET_SERIAL); - } - } - } - - // configure Usb2422 registers - pusb2422->VID.reg = 0x04D8; // from Microchip 4/19/2018 - pusb2422->PID.reg = 0xEEC5; // from Microchip 4/19/2018 = Massdrop, Inc. USB Hub - pusb2422->DID.reg = 0x0101; // BCD 01.01 - pusb2422->CFG1.bit.SELF_BUS_PWR = 1; // self powered for now - pusb2422->CFG1.bit.HS_DISABLE = 1; // full or high speed - // pusb2422->CFG2.bit.COMPOUND = 0; // compound device - pusb2422->CFG3.bit.STRING_EN = 1; // strings enabled - // pusb2422->NRD.bit.PORT2_NR = 0; // MCU is non-removable - pusb2422->MAXPB.reg = 20; // 0mA - pusb2422->HCMCB.reg = 20; // 0mA - pusb2422->MFRSL.reg = sizeof(MFRNAME) / sizeof(uint16_t); - pusb2422->PRDSL.reg = sizeof(PRDNAME) / sizeof(uint16_t); - pusb2422->SERSL.reg = serial_length; - memcpy(pusb2422->MFRSTR, MFRNAME, sizeof(MFRNAME)); - memcpy(pusb2422->PRDSTR, PRDNAME, sizeof(PRDNAME)); - memcpy(pusb2422->SERSTR, serial_use, serial_length * sizeof(uint16_t)); - // pusb2422->BOOSTUP.bit.BOOST=3; //upstream port - // pusb2422->BOOSTDOWN.bit.BOOST1=0; // extra port - // pusb2422->BOOSTDOWN.bit.BOOST2=2; //MCU is close - pusb2422->STCD.bit.USB_ATTACH = 1; - USB_write2422_block(); + USB2422_configure(); adc_extra = 0; DBGC(DC_USB_CONFIGURE_COMPLETE); } -uint16_t USB_active(void) { return (PORT->Group[USB2422_HUB_ACTIVE_GROUP].IN.reg & (1 << USB2422_HUB_ACTIVE_PIN)) != 0; } +uint16_t USB_active(void) { return USB2422_active(); } void USB_set_host_by_voltage(void) { // UP is upstream device (HOST) @@ -314,7 +228,7 @@ void USB_set_host_by_voltage(void) { DBGC(DC_USB_SET_HOST_BY_VOLTAGE_COMPLETE); } -uint8_t USB2422_Port_Detect_Init(void) { +uint8_t USB_Hub_Port_Detect_Init(void) { uint32_t port_detect_retry_ms; uint32_t tmod; diff --git a/tmk_core/protocol/arm_atsam/usb/usb_hub.h b/tmk_core/protocol/arm_atsam/usb/usb_hub.h new file mode 100644 index 00000000000..76b1e0a3263 --- /dev/null +++ b/tmk_core/protocol/arm_atsam/usb/usb_hub.h @@ -0,0 +1,51 @@ +/* +Copyright 2018 Massdrop Inc. + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef _USB2422_H_ +#define _USB2422_H_ + +#define REV_USB2422 0x100 + +#define PORT_DETECT_RETRY_INTERVAL 2000 + +#define USB_EXTRA_ADC_THRESHOLD 900 + +#define USB_EXTRA_STATE_DISABLED 0 +#define USB_EXTRA_STATE_ENABLED 1 +#define USB_EXTRA_STATE_UNKNOWN 2 +#define USB_EXTRA_STATE_DISABLED_UNTIL_REPLUG 3 + +#define USB_HOST_PORT_1 0 +#define USB_HOST_PORT_2 1 +#define USB_HOST_PORT_UNKNOWN 2 + +extern uint8_t usb_host_port; +extern uint8_t usb_extra_state; +extern uint8_t usb_extra_manual; +extern uint8_t usb_gcr_auto; + +void USB_Hub_init(void); +uint8_t USB_Hub_Port_Detect_Init(void); +void USB_reset(void); +void USB_configure(void); +uint16_t USB_active(void); +void USB_set_host_by_voltage(void); +uint16_t adc_get(uint8_t muxpos); +void USB_HandleExtraDevice(void); +void USB_ExtraSetState(uint8_t state); + +#endif //_USB2422_H_