mirror of
https://github.com/qmk/qmk_firmware
synced 2024-11-13 23:44:54 +00:00
71 lines
1.9 KiB
Markdown
71 lines
1.9 KiB
Markdown
|
# IBM 5291 keyboard converter
|
|||
|
|
|||
|
![5291](https://deskthority.net/wiki/IBM_Model_F#IBM_5291_Keyboard)
|
|||
|
|
|||
|
A converter for the eponymous keyboard.
|
|||
|
|
|||
|
Keyboard Maintainer: [Listofoptions](https://github.com/listofoptions)
|
|||
|
Hardware Supported: IBM 5291, Teensy 2.0
|
|||
|
|
|||
|
Make example for this keyboard (after setting up your build environment):
|
|||
|
|
|||
|
make converter/ibm_5291:default
|
|||
|
|
|||
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|||
|
|
|||
|
|
|||
|
the pinout is as follows:
|
|||
|
|
|||
|
IBM−5291−Cable to Pinhead−14
|
|||
|
|
|||
|
| pin | description
|
|||
|
----|------------------------
|
|||
|
1 | GND
|
|||
|
2 | NC
|
|||
|
3 | GND
|
|||
|
4 | GN)
|
|||
|
5 | +5V
|
|||
|
6 | D0
|
|||
|
7 | D1
|
|||
|
8 | D2
|
|||
|
9 | D3
|
|||
|
10| D4
|
|||
|
11| D5
|
|||
|
12| D6
|
|||
|
13| Strobe
|
|||
|
14| Out
|
|||
|
|
|||
|
the pins on this connector are organized ![here](https://geekhack.org/index.php?action=dlattach;topic=48950.0;attach=36759;image)
|
|||
|
|
|||
|
IBM−5291−2 Cable with DB15M connector
|
|||
|
|
|||
|
| pin | description
|
|||
|
----|-------------
|
|||
|
|1,2,3 | GND
|
|||
|
|4 | +5V
|
|||
|
|5 | D0
|
|||
|
|6 | D1
|
|||
|
|7 | D2
|
|||
|
|8 | D3
|
|||
|
|9 | D4
|
|||
|
|10 | D5
|
|||
|
|11 | D6
|
|||
|
|12 | Strobe
|
|||
|
|13 | Out
|
|||
|
|14 | PE
|
|||
|
|15 | NC
|
|||
|
|
|||
|
the above connector is actually numbered so it should be easier to determine
|
|||
|
where the needed connections are.
|
|||
|
|
|||
|
to connect to the teensy, the following are pins are needed (if you should choose not set your own):
|
|||
|
* PB0 -> PB6 are connected to D0 -> D6
|
|||
|
* +5V is connected to the corresponding teensy pin
|
|||
|
* gnd is as well, only one of the gnd pins needs to be connected though.
|
|||
|
* strobe is connected to pin PD1
|
|||
|
* data is connected to PD0
|
|||
|
* PE does not need to be connected to anything, but it could also be connected to gnd
|
|||
|
|
|||
|
sources:
|
|||
|
http://www.retrocomputing.eu/documents/5291_MaintenanceLibrary.pdf
|