mirror of
https://github.com/qmk/qmk_firmware
synced 2024-11-18 09:55:48 +00:00
34 lines
1.6 KiB
Markdown
34 lines
1.6 KiB
Markdown
|
# Cradio keyboards
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
Cradio are low-profile 34-key split-keyboards designed by [@davidphilipbarr](https://github.com/davidphilipbarr), with no diodes and direct micro-controller pin wiring.
|
||
|
|
|
||
|
|
## Keyboard Info
|
||
|
|
|
||
|
|
* Keyboard Maintainer: [davidphilipbarr](https://github.com/davidphilipbarr)
|
||
|
|
* Hardware Supported:
|
||
|
|
* [Sweep](https://github.com/davidphilipbarr/Sweep)
|
||
|
|
* [Hypergarlic](https://github.com/davidphilipbarr/hypergolic/tree/main/hypergarlic)
|
||
|
|
* Variants of the same 34-key direct pin PCB
|
||
|
|
* Hardware Availability: PCBs can be printed with gerber files from the repository
|
||
|
|
|
||
|
|
Make examples for this keyboard (after setting up your build environment):
|
||
|
|
|
||
|
|
make cradio:default
|
||
|
|
|
||
|
|
Firmware uses `EE_HANDS` split handedness by default. Each halve should be flashed once with the following:
|
||
|
|
|
||
|
|
make cradio:default:dfu-split-left
|
||
|
|
make cradio:default:dfu-split-right
|
||
|
|
|
||
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
||
|
|
|
||
|
|
## Bootloader
|
||
|
|
|
||
|
|
Enter the bootloader in 3 ways:
|
||
|
|
|
||
|
|
* **Bootmagic reset**: Hold down the top left key on the left half (or the top right right key on the right half) and plug in the controller on that side.
|
||
|
|
* **Physical reset button**: Briefly press the reset button soldered on the PCB.
|
||
|
|
* **Keycode in layout**: Press the key mapped to `RESET` if it is configured.
|