mirror of
https://github.com/qmk/qmk_firmware
synced 2024-11-17 17:35:30 +00:00
28 lines
1.3 KiB
Markdown
28 lines
1.3 KiB
Markdown
|
# Uthol
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
A handwired 50% (12x5) ortholinear keyboard made by Uthol
|
||
|
|
|
||
|
|
* Keyboard Maintainer: [Uthol](https://github.com/Uthol)
|
||
|
|
* Hardware Supported: Pro Micro ATMega32u4, Blackpill STM32F4x1
|
||
|
|
* Hardware Availability: [Pro Micro](https://www.sparkfun.com/products/12640), [Blackpill STM32F4x1 ](https://www.aliexpress.com/item/1005001456186625.html)
|
||
|
|
|
||
|
|
Make example for this keyboard (after setting up your build environment):
|
||
|
|
|
||
|
|
make handwired/uthol/rev2:default
|
||
|
|
|
||
|
|
Flashing example for this keyboard:
|
||
|
|
|
||
|
|
make handwired/uthol/rev2:default:flash
|
||
|
|
|
||
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
||
|
|
|
||
|
|
## Bootloader
|
||
|
|
|
||
|
|
Enter the bootloader in 3 ways:
|
||
|
|
|
||
|
|
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (the top left key) and plug in the keyboard
|
||
|
|
* **Physical reset button**: On the Pro Micro, short the `GND` and `RST` pins. On the Blackpill, press `BOOT0` key and the `RST` key, then release the `RST` key, and release the `BOOT0` key
|
||
|
|
* **Keycode in layout**: Press the key mapped to `Settings + Backspace`
|