opensteno_qmk/keyboards/zeal65/rules.mk
Wilba6582 48a992f1c0 Zeal60/Zeal65/M60-A implementation (#3879)
* Initial version of zeal60

* WIP

* Fixes issue #900

* Adding RGB underglow functionality.
Fixed a compile-time conflict caused by enabling RGB underglow functionality.

* Refactor RPC protocol

* Fix last merge

* README for RGB underglow updated.

* Additional README changes.

* Adding RGBW strip software-based current-limiting functionality.

* RGBW current-limiting functionality should be handled by RGBSTRIP_MAX_CURRENT_PER_LIGHT instead.

* Updated README to reflect implementation of built-in current limiting.

* Keymap readability improvements.

* Minor keymap improvements.

* Fixed LED driver init sequence, formatting

* Dimming implementation tested, working.

* Stab LEDs synced with spacebar hits in effects.

* RGB underglow tested and functional. Simplified README for RGB underglow.

* Undid accidental file deletion from previous merge conflict. Safer values for RGB underglow.

* Improved arrow key positions in keymap.

* Added functionality to correct uneven RGB underglow. Refactored related code.

* Reverted to safer values for underglow.

* Changes for v0.3

* Custom LED brightness scaling will take place after current adjustment in order to avoid being overridden.

* Create keymap.c

Added split backspace and split shift to ISO layout

* Create config.h

Turned on LEDs for new layout

* Fixed bug where left spacebar stabilizer LED (LC06) would adopt color of row above.

* Added hhkb_wilba keymap

* Update keymap.c

* Update keymap.c

* Update keymap.c

* Added indicators, full param setting via host

* Added "mousekey" layout

* Added Zeal65 support, factory test mode

* Keycode safe range changed, caused bugs

* Bumped EEPROM version due to change in QMK keycodes

* Disable HHKB "blocked" LEDs if KC_NO in keymap

* Added "disable_hhkb_blocker_leds"

* Required overridden function for keymaps in EEPROM

* Added polar coordinate mapping, effect speed

* Force Raw HID interface number to 1 always

* Fixed last merge from master

* Added effect speed to default keymaps

* add BACKLIGHT_ prefix to vars

* add BACKLIGHT_ prefix to vars

* Keymap speed effect; keymap improvements/fixes
Readme updated to match changes

* Refactored to use common IS31FL3731/I2C drivers

* Fixed make rules, backlight disabled feature

* Make split rightshift default for Zeal65

* Added M60-A as a "version" of Zeal60.

* Renamed IS31FL3731 driver functions

* Fix suspend_wakeup_init_kb() being defined twice

* First pass refactor dynamic keymaps

* Updated to changed I2C and ISSI drivers

* Refactor zeal_color.* usage to quantum/color.*

* Updated Zeal65, fixed dynamic_keymap

* Major refactoring of Zeal60 backlight and API

* Lots of little cleanups

* Added readme.md

* Added readme.md

* Added LAYOUT_60*() macros, refactored and cleaned up default keymaps

* Fix compile error in suspend.c

* Added Zeal65 LAYOUT macros, info.json

* Added rama/m60_a, deleted zeal60/keymaps/m60_a

* Fixed rama/m60_a/keymaps/proto

* Fixed compilation error for suspend.c

* Requested changes for PR

* Fixed readme.md images

* Another readme.md fix

* Added drashna's requested changes
2018-09-13 14:37:13 -04:00

79 lines
3.2 KiB
Makefile

# project specific files
SRC = ../zeal60/zeal60.c \
../zeal60/rgb_backlight.c \
quantum/color.c \
drivers/issi/is31fl3731.c \
drivers/avr/i2c_master.c
# MCU name
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section
BOOTLOADER = atmel-dfu
# Do not put the microcontroller into power saving mode
# when we get USB suspend event. We want it to keep updating
# backlight effects.
OPT_DEFS += -DNO_SUSPEND_POWER_DOWN
# Build Options
# change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically
#
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = no # Console for debug(+400)
COMMAND_ENABLE = no # Commands for debug and configuration
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
MIDI_ENABLE = no # MIDI controls
AUDIO_ENABLE = no # Audio output on port C6
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
RAW_ENABLE = yes
DYNAMIC_KEYMAP_ENABLE = yes
CIE1931_CURVE = yes