mirror of
https://github.com/openstenoproject/qmk
synced 2024-11-10 18:49:08 +00:00
155be34a1d
I2C timing parameters were seemingly set up for an STM32F303 target MCU, at a specific clock speed. This commit allows specifying the timing parameters via config.h, allowing other STM32 MCUs to be targeted, potentially at different clock frequencies. Alternate function modes for the I2C pins are now also configurable, allowing for remapping to other pins.
120 lines
4 KiB
C
120 lines
4 KiB
C
/* Copyright 2018 Jack Humbert
|
|
* Copyright 2018 Yiancar
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
/* This library is only valid for STM32 processors.
|
|
* This library follows the convention of the AVR i2c_master library.
|
|
* As a result addresses are expected to be already shifted (addr << 1).
|
|
* I2CD1 is the default driver which corresponds to pins B6 and B7. This
|
|
* can be changed.
|
|
* Please ensure that HAL_USE_I2C is TRUE in the halconf.h file and that
|
|
* STM32_I2C_USE_I2C1 is TRUE in the mcuconf.h file. Pins B6 and B7 are used
|
|
* but using any other I2C pins should be trivial.
|
|
*/
|
|
|
|
#include "i2c_master.h"
|
|
#include "quantum.h"
|
|
#include <string.h>
|
|
#include <hal.h>
|
|
|
|
static uint8_t i2c_address;
|
|
|
|
static const I2CConfig i2cconfig = {
|
|
STM32_TIMINGR_PRESC(I2C1_TIMINGR_PRESC) |
|
|
STM32_TIMINGR_SCLDEL(I2C1_TIMINGR_SCLDEL) | STM32_TIMINGR_SDADEL(I2C1_TIMINGR_SDADEL) |
|
|
STM32_TIMINGR_SCLH(I2C1_TIMINGR_SCLH) | STM32_TIMINGR_SCLL(I2C1_TIMINGR_SCLL),
|
|
0,
|
|
0
|
|
};
|
|
|
|
static i2c_status_t chibios_to_qmk(const msg_t* status) {
|
|
switch (*status) {
|
|
case I2C_NO_ERROR:
|
|
return I2C_STATUS_SUCCESS;
|
|
case I2C_TIMEOUT:
|
|
return I2C_STATUS_TIMEOUT;
|
|
// I2C_BUS_ERROR, I2C_ARBITRATION_LOST, I2C_ACK_FAILURE, I2C_OVERRUN, I2C_PEC_ERROR, I2C_SMB_ALERT
|
|
default:
|
|
return I2C_STATUS_ERROR;
|
|
}
|
|
}
|
|
|
|
__attribute__ ((weak))
|
|
void i2c_init(void)
|
|
{
|
|
// Try releasing special pins for a short time
|
|
palSetPadMode(I2C1_SCL_BANK, I2C1_SCL, PAL_MODE_INPUT);
|
|
palSetPadMode(I2C1_SDA_BANK, I2C1_SDA, PAL_MODE_INPUT);
|
|
|
|
chThdSleepMilliseconds(10);
|
|
|
|
palSetPadMode(I2C1_SCL_BANK, I2C1_SCL, PAL_MODE_ALTERNATE(I2C1_SCL_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN);
|
|
palSetPadMode(I2C1_SDA_BANK, I2C1_SDA, PAL_MODE_ALTERNATE(I2C1_SDA_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN);
|
|
|
|
//i2cInit(); //This is invoked by halInit() so no need to redo it.
|
|
}
|
|
|
|
i2c_status_t i2c_start(uint8_t address)
|
|
{
|
|
i2c_address = address;
|
|
i2cStart(&I2C_DRIVER, &i2cconfig);
|
|
return I2C_STATUS_SUCCESS;
|
|
}
|
|
|
|
i2c_status_t i2c_transmit(uint8_t address, const uint8_t* data, uint16_t length, uint16_t timeout)
|
|
{
|
|
i2c_address = address;
|
|
i2cStart(&I2C_DRIVER, &i2cconfig);
|
|
msg_t status = i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), data, length, 0, 0, MS2ST(timeout));
|
|
return chibios_to_qmk(&status);
|
|
}
|
|
|
|
i2c_status_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout)
|
|
{
|
|
i2c_address = address;
|
|
i2cStart(&I2C_DRIVER, &i2cconfig);
|
|
msg_t status = i2cMasterReceiveTimeout(&I2C_DRIVER, (i2c_address >> 1), data, length, MS2ST(timeout));
|
|
return chibios_to_qmk(&status);
|
|
}
|
|
|
|
i2c_status_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, const uint8_t* data, uint16_t length, uint16_t timeout)
|
|
{
|
|
i2c_address = devaddr;
|
|
i2cStart(&I2C_DRIVER, &i2cconfig);
|
|
|
|
uint8_t complete_packet[length + 1];
|
|
for(uint8_t i = 0; i < length; i++)
|
|
{
|
|
complete_packet[i+1] = data[i];
|
|
}
|
|
complete_packet[0] = regaddr;
|
|
|
|
msg_t status = i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), complete_packet, length + 1, 0, 0, MS2ST(timeout));
|
|
return chibios_to_qmk(&status);
|
|
}
|
|
|
|
i2c_status_t i2c_readReg(uint8_t devaddr, uint8_t* regaddr, uint8_t* data, uint16_t length, uint16_t timeout)
|
|
{
|
|
i2c_address = devaddr;
|
|
i2cStart(&I2C_DRIVER, &i2cconfig);
|
|
msg_t status = i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), regaddr, 1, data, length, MS2ST(timeout));
|
|
return chibios_to_qmk(&status);
|
|
}
|
|
|
|
void i2c_stop(void)
|
|
{
|
|
i2cStop(&I2C_DRIVER);
|
|
}
|